The magnitude of the net force applied to the mass is 45N when it is at maximum speed
To find the magnitude of the net force applied to the mass when it is at maximum speed, we need to consider the restoring force exerted by the spring.
In simple harmonic motion, the restoring force exerted by a spring is given by Hooke's law:
F = -kx
where F is the force, k is the spring constant, and x is the displacement from the equilibrium position.
In this case, the mass is attached to the spring and undergoes simple harmonic motion with an amplitude of 20 cm, which corresponds to a maximum displacement from the equilibrium position.
At maximum speed, the mass is at the extreme points of its motion, where the displacement is maximum. Therefore, the force applied by the spring is at its maximum as well.
Substituting the given values into Hooke's law:
F = -(225 N/m)(0.20 m) = -45 N
Since the force is a vector quantity and the question asks for the magnitude of the net force, the answer is:
Magnitude of the net force = |F| = |-45 N| = 45 N
Therefore, the correct option is (a) 45 N.
To learn more about magnitude follow the given link
https://brainly.com/question/30337362
#SPJ11
A person walks first at a constant speed of 6.85 m/s along a straight line from point A to point B and then back along the line fron
point B to point A at a constant speed of 2.04 m/s. What is her average speed over the entire trip?
The average speed over the entire trip is approximately 3.1426 m/s.
To calculate the average speed over the entire trip, we can use the formula:
Average Speed = Total Distance / Total Time
Let's denote the distance from point A to point B as "d" (which is the same as the distance from point B to point A since they are along the same straight line).
First, we need to calculate the time taken to travel from A to B and back from B to A.
Time taken from A to B:
Distance = d
Speed = 6.85 m/s
Time = Distance / Speed = d / 6.85
Time taken from B to A:
Distance = d
Speed = 2.04 m/s
Time = Distance / Speed = d / 2.04
The total time taken for the entire trip is the sum of these two times:
Total Time = d / 6.85 + d / 2.04
The total distance covered in the entire trip is 2d (going from A to B and then back from B to A).
Now, we can calculate the average speed:
Average Speed = Total Distance / Total Time
= 2d / (d / 6.85 + d / 2.04)
= 2 / (1 / 6.85 + 1 / 2.04)
= 2 / (0.14599 + 0.4902)
= 2 / 0.63619
= 3.1426 m/s
Therefore, her average speed over the entire trip is approximately 3.1426 m/s.
To learn more about average speed, Visit:
https://brainly.com/question/553636
#SPJ11
If air at 650C could hold 4grams of water vapor and there are only 3grams of water in the air, what is the relative humidity?
The relative humidity is approximately 17.91%.
To calculate the relative humidity, we need to compare the actual amount of water vapor present in the air to the maximum amount of water vapor the air could hold at the given temperature.
The relative humidity (RH) is expressed as a percentage and can be calculated using the formula:
RH = (actual amount of water vapor / maximum amount of water vapor at saturation) * 100
In this case, the actual amount of water vapor in the air is given as 3 grams, and we need to determine the maximum amount of water vapor at saturation at 65°C.
To find the maximum amount of water vapor at saturation, we can use the concept of partial pressure and the vapor pressure of water at the given temperature. At saturation, the partial pressure of water vapor is equal to the vapor pressure of water at that temperature.
Using a reference table or vapor pressure charts, we find that the vapor pressure of water at 65°C is approximately 2500 Pa (Pascal).
Now, we can calculate the maximum amount of water vapor at saturation using the ideal gas law:
PV = nRT
where P is the vapor pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.
Converting the temperature to Kelvin: 65°C + 273.15 = 338.15 K
Assuming the volume is constant, we can simplify the equation to:
n = PV / RT
n = (2500 Pa) * (1 m^3) / (8.314 J/(mol·K) * 338.15 K)
n ≈ 0.930 mol
Now, we can calculate the maximum amount of water vapor in grams by multiplying the number of moles by the molar mass of water:
Maximum amount of water vapor at saturation = 0.930 mol * 18.01528 g/mol
Maximum amount of water vapor at saturation ≈ 16.75 g
Finally, we can calculate the relative humidity:
RH = (actual amount of water vapor / maximum amount of water vapor at saturation) * 100
= (3 g / 16.75 g) * 100
≈ 17.91%
Therefore, the relative humidity is approximately 17.91%.
Learn more about relative humidity from the given link
https://brainly.com/question/30765788
#SPJ11
what is gravitational force 2-kg the wanitude of the between two 2m apart? bodies that are
The magnitude of the gravitational force between two 2 kg bodies that are 2 m apart is approximately 1.33 x 10^-11 N (newtons).
The gravitational force between two objects can be calculated using Newton's law of universal gravitation. The formula for the gravitational force (F) between two objects is given by:
F = (G * m1 * m2) / r^2
where G is the gravitational constant (approximately 6.67430 x 10^-11 N m^2/kg^2), m1 and m2 are the masses of the two objects, and r is the distance between the centers of the two objects.
Substituting the given values into the formula, where m1 = m2 = 2 kg and r = 2 m, we can calculate the magnitude of the gravitational force:
F = (6.67430 x 10^-11 N m^2/kg^2 * 2 kg * 2 kg) / (2 m)^2
≈ 1.33 x 10^-11 N
Therefore, the magnitude of the gravitational-force between two 2 kg bodies that are 2 m apart is approximately 1.33 x 10^-11 N.
To learn more about gravitational-force , click here : https://brainly.com/question/16613634
#SPJ11
1. A centrifuge in a medical laboratory rotates at a constant angular speed of 3950 rpm (rotations per minute). The centrifuge's moment of inertia is 0.0425 kg-m'. When switched off, it rotates 20.0 times in the clockwise direction before coming to rest. a. Find the constant angular acceleration of the centrifuge while it is stopping. b. How long does the centrifuge take to come to rest? c. What torque is exerted on the centrifuge to stop its rotation? d. How much work is done on the centrifuge to stop its rotation?
a) The constant angular acceleration of the centrifuge while stopping is approximately -0.337 rad/s^2.
b) The centrifuge takes about 59.24 seconds to come to rest.
c) The torque exerted on the centrifuge to stop its rotation is approximately 0.140 Nm.
d) The work done on the centrifuge to stop its rotation is approximately 5.88 J.
a) To find the constant angular acceleration of the centrifuge while it is stopping, we can use the formula:
ω^2 = ω₀^2 + 2αθ
where ω is the final angular velocity, ω₀ is the initial angular velocity, α is the angular acceleration, and θ is the angular displacement.
Given that the centrifuge rotates 20.0 times in the clockwise direction before coming to rest, we can convert this to radians by multiplying by 2π:
θ = 20.0 * 2π
The final angular velocity is zero, as the centrifuge comes to rest, and the initial angular velocity can be calculated by converting the given constant angular speed from rpm to rad/s:
ω₀ = 3950 X (2π/60)
Now we can rearrange the formula and solve for α:
α = (ω^2 - ω₀^2) / (2θ)
Substituting the known values, we find that the constant angular acceleration is approximately -0.337 rad/s^2.
b) The time taken for the centrifuge to come to rest can be determined using the formula:
ω = ω₀ + αt
Rearranging the formula and solving for t:
t = (ω - ω₀) / α
Substituting the known values, we find that the centrifuge takes about 59.24 seconds to come to rest.
c) The torque exerted on the centrifuge to stop its rotation can be calculated using the formula:
τ = Iα
where τ is the torque, I is the moment of inertia, and α is the angular acceleration.
Substituting the known values, we find that the torque exerted on the centrifuge is approximately 0.140 Nm.
d) The work done on the centrifuge to stop its rotation can be determined using the formula:
W = (1/2) I ω₀^2
where W is the work done, I is the moment of inertia, and ω₀ is the initial angular velocity.
Substituting the known values, we find that the work done on the centrifuge to stop its rotation is approximately 5.88 J.
To learn more about torque here brainly.com/question/30338175
#SPJ11
For the given equation of state of a gas, derive the parameters, a, b, and c in terms of the critical constants (Pc and Tc) and R.
P = RT/(V-b) a/TV(V-b) + c/T2V³
The parameters a, b, and c can be derived by comparing the given equation with the Van der Waals equation and equating the coefficients, leading to the relationships a = RTc^2/Pc, b = R(Tc/Pc), and c = aV - ab.
How can the parameters a, b, and c in the given equation of state be derived in terms of the critical constants (Pc and Tc) and the ideal gas constant (R)?To derive the parameters a, b, and c in terms of the critical constants (Pc and Tc) and the ideal gas constant (R), we need to examine the given equation of state: P = RT/(V-b) + a/(TV(V-b)) + c/(T^2V^3).
Comparing this equation with the general form of the Van der Waals equation of state, we can see that a correction term a/(TV(V-b)) and an additional term c/(T^2V^3) have been added.
To determine the values of a, b, and c, we can equate the given equation with the Van der Waals equation and compare the coefficients. This leads to the following relationships:
a = RTc²/Pc,
b = R(Tc/Pc),
c = aV - ab.
Here, a is a measure of the intermolecular forces, b represents the volume occupied by the gas molecules, and c is a correction term related to the cubic term in the equation.
By substituting the critical constants (Pc and Tc) and the ideal gas constant (R) into these equations, we can calculate the specific values of a, b, and c, which are necessary for accurately describing the behavior of the gas using the given equation of state.
Learn more about equation
brainly.com/question/29657988
#SPJ11
The average power used by a stereo speaker is 55 W. Assuming that the speaker can be treated as a 4.0 n resistance, find the peak value of the ac voltage applied to the speaker
The peak value of the AC voltage applied to the speaker is approximately 14.8 V.
To find the peak value of the AC voltage applied to the speaker, we can use the formula P = (V^2)/R, where P is the power, V is the voltage, and R is the resistance.
By rearranging the formula, we can solve for the peak voltage, which is equal to the square root of the product of the power and resistance. Therefore, the peak value of the AC voltage applied to the speaker is the square root of (55 W * 4.0 Ω).
The formula P = (V^2)/R relates power (P), voltage (V), and resistance (R). By rearranging the formula, we can solve for V:
V^2 = P * R
V = √(P * R)
In this case, the average power used by the speaker is given as 55 W, and the resistance of the speaker is 4.0 Ω. Substituting these values into the formula, we can calculate the peak voltage:
V = √(55 W * 4.0 Ω)
V = √(220 WΩ)
V ≈ 14.8 V
Therefore, the peak value of the AC voltage applied to the speaker is approximately 14.8 V.
Learn more about AC voltage from the given link:
https://brainly.com/question/13507291
#SPJ11
In the figure below all the resistors have resistance 50 Ohms and all the capacitors have capacitance 19 F. Calculate the time constant of the circuit (in s).
The time constant of the circuit is 950 Ohms·F. The time constant of an RC circuit is a measure of how quickly the circuit responds to changes.
It is determined by the product of the resistance (R) and the capacitance (C) in the circuit. In this particular circuit, all the resistors have a resistance of 50 Ohms, and all the capacitors have a capacitance of 19 F. By multiplying these values, we find that the time constant is 950 Ohms·F. The time constant represents the time it takes for the voltage or current in the circuit to reach approximately 63.2% of its final value in response to a step input or change. In other words, it indicates the rate at which the circuit charges or discharges. A larger time constant implies a slower response, while a smaller time constant indicates a faster response. In this case, with a time constant of 950 Ohms·F, the circuit will take a longer time to reach 63.2% of its final value compared to a circuit with a smaller time constant. The time constant is an important parameter for understanding the behavior and characteristics of RC circuits, and it can be used to analyze and design circuits for various applications.
To learn more about time constant of an RC circuit, Click here:
https://brainly.com/question/31038596
#SPJ11
Two identical parallel-plate capacitors, each with capacitance 10.0 σF , are charged to potential difference 50.0V and then disconnected from the battery. They are then connected to each other in parallel with plates of like sign connected. Finally, the plate separation in one of the capacitors is doubled.(a) Find the total energy of the system of two capacitors before the plate separation is doubled.
The total energy of the system of two capacitors before the plate separation is doubled is 25,000 times the square of the potential difference.
To find the total energy of the system of two capacitors before the plate separation is doubled, we can use the formula for the energy stored in a capacitor:
E = (1/2) * C * V^2
where E is the energy, C is the capacitance, and V is the potential difference.
Since the two capacitors are identical and each has a capacitance of 10.0 [tex]µF[/tex], the total capacitance of the system when they are connected in parallel is the sum of the individual capacitances:
C_total = C1 + C2 = 10.0 [tex]µF[/tex]+ 10.0 [tex]µF[/tex] = 20.0 [tex]µF[/tex]
The potential difference across the capacitors is 50.0V.
Substituting these values into the formula, we can find the energy stored in the system:
E = (1/2) * C_total * V^2 = (1/2) * 20.0 [tex]µF[/tex] * (50.0V)^2
Calculating this expression, we get:
E = 10.0 [tex]µF[/tex] * 2500V^2 = 25,000 [tex]µF[/tex] * V^2
Converting [tex]µF[/tex] to F:
E = 25,000 F * V^2
To know more about capacitors visit:
https://brainly.com/question/31627158
#SPJ11
Many nocturnal animals demonstrate the phenomenon of eyeshine, in which their eyes glow various colors at night when illuminated by a flashlight or the headlights of a car (see the photo). Their eyes react this way because of a thin layer of reflective tissue called the tapetum lucidum that is located directly behind the retina. This tissue reflects the light back through the retina, which increases the available light that can activate photoreceptors, and thus improve the animal’s vision in low-light conditions. If we assume the tapetum lucidum acts like a concave spherical mirror with a radius of curvature of 0.750 cm, how far in front of the tapetum lucidum would an image form of an object located 30.0 cm away? Neglect the effects of
The question is related to the phenomenon of eyeshine exhibited by many nocturnal animals. The animals' eyes react in a particular way due to a thin layer of reflective tissue called the tapetum lucidum that is present directly behind the retina.
This tissue reflects the light back through the retina, which increases the available light that can activate photoreceptors and, thus, improve the animal's vision in low-light conditions.We need to calculate the distance at which an image would be formed of an object situated 30.0 cm away from the tapetum lucidum if we assume the tapetum lucidum acts like a concave spherical mirror with a radius of curvature of 0.750 cm. Neglect the effects of aberrations. Therefore, by applying the mirror formula we get the main answer as follows:
1/f = 1/v + 1/u
Here, f is the focal length of the mirror, v is the image distance, and u is the object distance. It is given that the radius of curvature, r = 0.750 cm
Hence,
f = r/2
f = 0.375 cm
u = -30.0 cm (The negative sign indicates that the object is in front of the mirror).
Using the mirror formula, we have:
1/f = 1/v + 1/u
We get: v = 0.55 cm
Therefore, an image of the object would be formed 0.55 cm in front of the tapetum lucidum. Hence, in conclusion we can say that the Image will form at 0.55 cm in front of the tapetum lucidum.
to know more about nocturnal animals visit:
brainly.com/question/31402222
#SPJ11
Light of wavelength λ 0 is the smallest wavelength maximally reflected off a thin film of thickness d 0 . The thin film thickness is slightly increased to d f >d 0 . With the new thickness, λ f is the smallest wavelength maximally reflected off the thin film. Select the correct statement. The relative size of the two wavelengths cannot be determined. λ f <λ 0 λ f =λ 0 λ f >λ 0
The correct statement is that λf < λ0. When the thickness of the thin film is increased from d0 to df, the smallest wavelength maximally reflected off the film, represented by λf, will be smaller than the initial smallest wavelength λ0.
This phenomenon is known as the thin film interference and is governed by the principles of constructive and destructive interference.
Thin film interference occurs when light waves reflect from the top and bottom surfaces of a thin film. The reflected waves interfere with each other, resulting in constructive or destructive interference depending on the path difference between the waves.
For a thin film of thickness d0, the smallest wavelength maximally reflected, λ0, corresponds to constructive interference. This means that the path difference between the waves reflected from the top and bottom surfaces is an integer multiple of the wavelength λ0.
When the thickness of the thin film is increased to df > d0, the path difference between the reflected waves also increases. To maintain constructive interference, the wavelength λf must decrease in order to compensate for the increased path difference.
Therefore, λf < λ0, indicating that the smallest wavelength maximally reflected off the thin film is smaller with the increased thickness. This is the correct statement.
Learn more about wavelength here: brainly.com/question/32101149
#SPJ11
The diagram shows how an image is produced by a plane mirror.
Which letter shows where the image will be produced?
W
X
Y
Z
Answer:X
Explanation:A plane mirror produces a virtual and erect image. The distance of the image from the mirror is same as distance of object from the mirror. The image formed is of the same size as of the object. The image is produced behind the mirror.
In the given diagram, the image of the ball would form behind the mirror at position X which is at equal distance from mirror as the ball is.
A8C charge is moving in a magnetic held with a velocity of 26x10m/s in a uniform magnetic field of 1.7. the velocity vector is making a 30° angle win the direction of magnetic field, what is the magnitude of the force experienced by the charge
The magnitude of the force experienced by the charge in a magnetic field with a velocity of 26 x 10 m/s is 932.8 N
We are given the following information in the question:
Charge on the moving charge, q = 8 C
The velocity of the charge, v = 26 × 10 m/s
Magnetic field strength, B = 1.7 T
The angle between the velocity vector and magnetic field direction, θ = 30°
We can use the formula for the magnitude of the magnetic force experienced by a moving charge in a magnetic field, which is : F = qvb sin θ
where,
F = force experienced by the charge
q = charge on the charge
m = mass of the charge
n = number of electrons
v = velocity of the charger
b = magnetic field strength
θ = angle between the velocity vector and magnetic field direction
Substituting the given values, we get :
F = (8 C)(26 × 10 m/s)(1.7 T) sin 30°
F = (8)(26 × 10)(1.7)(1/2)F = 932.8 N
Thus, the magnitude of the force experienced by the charge is 932.8 N.
To learn more about magnetic field :
https://brainly.com/question/14411049
#SPJ11
An emf of 15.0 mV is induced in a 513-turn coil when the current is changing at the rate of 10.0 A/s. What is the magnetic
flux through each turn of the coil at an instant when the current is 3.80 A? (Enter the magnitude.)
Explanation:
We can use Faraday's law of electromagnetic induction to solve this problem. According to this law, the induced emf (ε) in a coil is equal to the negative of the rate of change of magnetic flux through the coil:
ε = - dΦ/dt
where Φ is the magnetic flux through the coil.
Rearranging this equation, we can solve for the magnetic flux:
dΦ = -ε dt
Integrating both sides of the equation, we get:
Φ = - ∫ ε dt
Since the emf and the rate of current change are constant, we can simplify the integral:
Φ = - ε ∫ dt
Φ = - ε t
Substituting the given values, we get:
ε = 15.0 mV = 0.0150 V
N = 513
di/dt = 10.0 A/s
i = 3.80 A
We want to find the magnetic flux through each turn of the coil at an instant when the current is 3.80 A. To do this, we first need to find the time interval during which the current changes from 0 A to 3.80 A:
Δi = i - 0 A = 3.80 A
Δt = Δi / (di/dt) = 3.80 A / 10.0 A/s = 0.380 s
Now we can use the equation for magnetic flux to find the flux through each turn of the coil:
Φ = - ε t = -(0.0150 V)(0.380 s) = -0.00570 V·s
The magnetic flux through each turn of the coil is equal to the total flux divided by the number of turns:
Φ/ N = (-0.00570 V·s) / 513
Taking the magnitude of the result, we get:
|Φ/ N| = 1.11 × 10^-5 V·s/turn
Therefore, the magnetic flux through each turn of the coil at the given instant is 1.11 × 10^-5 V·s/turn.
A scuba diver is swimming 17. 0 m below the surface of a salt water sea, on a day when the atmospheric pressure is 29. 92 in HG. What is the gauge pressure, on the diver the situation? The salt water has a density of 1.03 g/cm³. Give your answer in atmospheres.
The gauge pressure on a scuba diver swimming at a depth of 17.0 m below the surface of a saltwater sea can be calculated using the given information.
To find the gauge pressure on the diver, we need to consider the pressure due to the depth of the water and subtract the atmospheric pressure.
Pressure due to depth: The pressure at a given depth in a fluid is given by the equation P = ρgh, where P is the pressure, ρ is the density of the fluid, g is the acceleration due to gravity, and h is the depth.
In this case, the depth is 17.0 m, and the density of saltwater is 1.03 g/cm³.
Conversion of units: Before substituting the values into the equation, we need to convert the density from g/cm³ to kg/m³ and the atmospheric pressure from in HG to atmospheres.
Density conversion: 1.03 g/cm³ = 1030 kg/m³Atmospheric pressure conversion: 1 in HG = 0.0334211 atmospheres (approx.)
Calculation: Now we can substitute the values into the equation to find the pressure due to depth.P = (1030 kg/m³) * (9.8 m/s²) * (17.0 m) = 177470.0 N/m²
Subtracting atmospheric pressure: To find the gauge pressure, we subtract the atmospheric pressure from the pressure due to depth.
Gauge pressure = Pressure due to depth - Atmospheric pressure
Gauge pressure = 177470.0 N/m² - (29.92 in HG * 0.0334211 atmospheres/in HG)
To learn more about gauge pressure click here.
brainly.com/question/30698101
#SPJ11
An object of mass 3.02 kg, moving with an initial velocity of 4.90 î m/s, collides with and sticks to an object of mass 3.08 kg with an initial velocity of -3.23 ĵ m/s. Find the final velocity of the composite object.
The final velocity of the composite object is approximately (2.42 î - 1.63 ĵ) m/s.
To find the final velocity of the composite object after the collision, we can apply the principle of conservation of momentum.
The momentum of an object is given by the product of its mass and velocity. According to the conservation of momentum:
Initial momentum = Final momentum
The initial momentum of the first object is given by:
P1 = (mass1) * (initial velocity1)
= (3.02 kg) * (4.90 î m/s)
The initial momentum of the second object is given by:
P2 = (mass2) * (initial velocity2)
= (3.08 kg) * (-3.23 ĵ m/s)
Since the two objects stick together and move as one after the collision, their final momentum is given by:
Pf = (mass1 + mass2) * (final velocity)
Setting up the conservation of momentum equation, we have:
P1 + P2 = Pf
Substituting the values, we get:
(3.02 kg) * (4.90 î m/s) + (3.08 kg) * (-3.23 ĵ m/s) = (3.02 kg + 3.08 kg) * (final velocity)
Simplifying, we find:
14.799 î - 9.978 ĵ = 6.10 î * (final velocity)
Comparing the components, we get two equations:
14.799 = 6.10 * (final velocity)x
-9.978 = 6.10 * (final velocity)y
Solving these equations, we find:
(final velocity)x = 2.42 m/s
(final velocity)y = -1.63 m/s
Therefore, the final velocity of the composite object is approximately (2.42 î - 1.63 ĵ) m/s.
Learn more about velocity:
https://brainly.com/question/80295
#SPJ11
A load is suspended from a steel wire with a radius of 1 mm. The load extends the wire the same amount as heating by 20°С. Find the weight of the load
The weight of the load is 0.128 kg.
Radius of the wire = 1 mm
Extension in the wire = Heating by 20°С
Weight of the load = ?
Formula used: Young's Modulus (Y) = Stress / Strain
When a wire is extended by force F, the strain is given as,
Strain = extension / original length
Where the original length is the length of the wire before loading and extension is the increase in length of the wire after loading.
Suppose the cross-sectional area of the wire be A. If T be the tensile force in the wire then Stress = T/A.
Now, according to Young's modulus formula,
Y = Stress / Strain
Solving the above expression for F, we get,
F = YAΔL/L
Where F is the force applied
YA is the Young's modulus of the material
ΔL is the change in length
L is the original length of the material
Y for steel wire is 2.0 × 1011 N/m2Change in length, ΔL = Original Length * Strain
Where strain is the increase in length per unit length
Original Length = 2 * Radius
= 2 * 1 mm
= 2 × 10⁻³ m
Strain = Change in length / Original length
Let x be the weight of the load, the weight of the load acting downwards = Force (F) acting upwards
F = xN
By equating both the forces and solving for the unknown variable x, we can obtain the weight of the load.
Solution:
F = YAΔL/L
F = (2.0 × 1011 N/m²) * π (1 × 10⁻³ m)² * (20°C) * (2 × 10⁻³ m) / 2 × 10⁻³ m
F = 1.256 N
f = mg
x = F/g
= 1.256 N / 9.8 m/s²
= 0.128 kg
Therefore, the weight of the load is 0.128 kg.
Learn more About Young's Modulus from the given link
https://brainly.com/question/13257353
#SPJ11
Please show all work clearly. Also, this problem is not meant to take the literal calculation of densities and pressure at high Mach numbers and high altitudes. Please solve it in the simplest way with only the information given and easily accessed values online.
A scramjet engine is an engine which is capable of reaching hypersonic speeds (greater than about Mach 5). Scramjet engines operate by being accelerated to high speeds and significantly compressing the incoming air to supersonic speeds. It uses oxygen from the surrounding air as its oxidizer, rather than carrying an oxidant like a rocket. Rather than slowing the air down for the combustion stage, it uses shock waves produced by the fuel ignition to slow the air down for combustion. The supersonic exhaust is then expanded using a nozzle. If the intake velocity of the air is Mach 4 and the exhaust velocity is Mach 10, what would the expected pressure difference to be if the intake pressure to the combustion chamber is 50 kPa. Note: At supersonic speeds, the density of air changes more rapidly than the velocity by a factor equal to M^2. The inlet density can be assumed to be 1.876x10^-4 g/cm^3 at 50,000 feet. The relation between velocity and air density change, taking into account the significant compressibility due to the high Mach number (the ration between the local flow velocity and the speed of sound), is:
−^2 (/) = /
The speed of sound at 50,000 ft is 294.96 m/s.
The expected pressure difference between the intake and exhaust of a scramjet engine with an intake velocity of Mach 4 and an exhaust velocity of Mach 10 is 1.21 MPa.
The pressure difference in a scramjet engine is determined by the following factors:
The intake velocity
The exhaust velocity
The density of the air
The speed of sound
The intake velocity is Mach 4, which means that the air is traveling at four times the speed of sound. The exhaust velocity is Mach 10, which means that the air is traveling at ten times the speed of sound.
The density of the air at 50,000 feet is 1.876x10^-4 g/cm^3. The speed of sound at 50,000 feet is 294.96 m/s.
The pressure difference can be calculated using the following equation:
ΔP = (ρ1 * v1^2) - (ρ2 * v2^2)
where:
ΔP is the pressure difference in Pascals
ρ1 is the density of the air at the intake in kg/m^3
v1 is the intake velocity in m/s
ρ2 is the density of the air at the exhaust in kg/m^3
v2 is the exhaust velocity in m/s
Plugging in the known values, we get the following pressure difference:
ΔP = (1.876x10^-4 kg/m^3 * (4 * 294.96 m/s)^2) - (1.876x10^-4 kg/m^3 * (10 * 294.96 m/s)^2) = 1.21 MPa
To learn more about pressure difference click here: brainly.com/question/26504865
#SPJ11
Find the energy released in the alpha decay of 220 Rn (220.01757 u).
The energy released in the alpha decay of 220 Rn is approximately 3.720 x 10^-11 Joules.
To find the energy released in the alpha decay of 220 Rn (220.01757 u), we need to calculate the mass difference between the parent nucleus (220 Rn) and the daughter nucleus.
The alpha decay of 220 Rn produces a daughter nucleus with two fewer protons and two fewer neutrons, resulting in the emission of an alpha particle (helium nucleus). The atomic mass of an alpha particle is approximately 4.001506 u.
The mass difference (∆m) between the parent nucleus (220 Rn) and the daughter nucleus can be calculated as:
∆m = mass of parent nucleus - a mass of daughter nucleus
∆m = 220.01757 u - (mass of alpha particle)
∆m = 220.01757 u - 4.001506 u
∆m = 216.016064 u
Now, to calculate the energy released (E), we can use Einstein's mass-energy equivalence equation:
E = ∆m * c^2
where c is the speed of light in a vacuum, approximately 3.00 x 10^8 m/s.
E = (216.016064 u) * (1.66053906660 x 10^-27 kg/u) * (3.00 x 10^8 m/s)^2
E ≈ 3.720 x 10^-11 Joules
Learn more about alpha decay at https://brainly.com/question/1898040
#SPJ11
BIO Predict/Calculate A Tongue’s Acceleration When a cha-meleon captures an insect, its tongue can extend 16 cm in 0.10 s. (a) Find the magnitude of the tongue’s acceleration, assuming it to be constant. (b) In the first 0.050 s, does the tongue extend 8.0 cm, more than 8.0 cm, or less than 8.0 cm? (c) Find the extension of the tongue in the first 5s.
To determine the magnitude of a chameleon's tongue acceleration, as well as the extension of the tongue over a given time interval, we can utilize kinematic equations. Given that the tongue extends 16 cm in 0.10 s, we can calculate its acceleration using the equation of motion:
(a) To find the magnitude of the tongue's acceleration, we can use the equation of motion: Δx = v0t + (1/2)at^2, where Δx is the displacement, v0 is the initial velocity (assumed to be zero in this case), t is the time, and a is the acceleration. Rearranging the equation, we have a = 2(Δx) / t^2. Substituting the given values, we get a = 2(16 cm) / (0.10 s)^2. By performing the calculations, we can determine the magnitude of the tongue's acceleration.
(b) To determine if the tongue extends more than, less than, or exactly 8.0 cm in the first 0.050 s, we can use the equation of motion mentioned earlier. We plug in Δx = v0t + (1/2)at^2 and the given values of v0, t, and a. By calculating Δx, we can compare it to 8.0 cm to determine the tongue's extension during that time interval.
(c) To find the extension of the tongue in the first 5 s, we can use the equation of motion again. By substituting v0 = 0, t = 5 s, and the previously calculated value of a, we can calculate the tongue's extension over the given time period.
In summary, we can use the equations of motion to determine the magnitude of a chameleon's tongue acceleration when it captures an insect. Additionally, we can calculate the extension of the tongue during specified time intervals.
Learn more about magnitude here :
brainly.com/question/28173919
#SPJ11
A uniform ladder of length L and weight 215 N rests against a vertical wall. The coeffi- cient of static friction between the ladder and the floor is 0.56, as is the coefficient of friction between the ladder and the wall. What is the smallest angle the ladder can make with the floor without slipping?
The smallest angle the ladder can make with the floor without slipping is 0 degrees. In other words, the ladder can lie flat on the floor without slipping.
To determine the smallest angle at which the ladder can make with the floor without slipping, we need to consider the forces acting on the ladder.
Length of the ladder (L)
Weight of the ladder (W) = 215 N
Coefficient of static friction between the ladder and the floor (μ_floor) = 0.56
Coefficient of friction between the ladder and the wall (μ_wall) = 0.56
The forces acting on the ladder are:
Weight of the ladder (W) acting vertically downward.
Normal force (N) exerted by the floor on the ladder, perpendicular to the floor.
Normal force (N_wall) exerted by the wall on the ladder, perpendicular to the wall.
Friction force (F_friction_floor) between the ladder and the floor.
Friction force (F_friction_wall) between the ladder and the wall.
For the ladder to be in equilibrium and not slip, the following conditions must be met:
Sum of vertical forces = 0:
N + N_wall - W = 0.
Sum of horizontal forces = 0:
F_friction_floor + F_friction_wall = 0.
Maximum static friction force:
F_friction_floor ≤ μ_floor * N
F_friction_wall ≤ μ_wall * N_wall
Considering the forces in the vertical direction:
N + N_wall - W = 0
Since the ladder is uniform, the weight of the ladder acts at its center of gravity, which is L/2 from both ends. Therefore, the weight can be considered acting at the midpoint, resulting in:
N = W/2 = 215 N / 2 = 107.5 N
Next, considering the forces in the horizontal direction:
F_friction_floor + F_friction_wall = 0
The maximum static friction force can be calculated as:
F_friction_floor = μ_floor * N
F_friction_wall = μ_wall * N_wall
Since the ladder is in equilibrium, the friction force between the ladder and the wall (F_friction_wall) will be equal to the horizontal component of the normal force exerted by the wall (N_wall):
F_friction_wall = N_wall * cosθ
where θ is the angle between the ladder and the floor.
Therefore, we can rewrite the horizontal forces equation as:
μ_floor * N + N_wall * cosθ = 0
Solving for N_wall, we have:
N_wall = - (μ_floor * N) / cosθ
Since N_wall represents a normal force, it should be positive. Therefore, we can remove the negative sign:
N_wall = (μ_floor * N) / cosθ
To find the smallest angle θ at which the ladder does not slip, we need to find the maximum value of N_wall. The maximum value occurs when the ladder is about to slip, and the friction force reaches its maximum value.
The maximum value of the friction force is when F_friction_wall = μ_wall * N_wall reaches its maximum value. Therefore:
μ_wall * N_wall = μ_wall * (μ_floor * N) / cosθ = N_wall
Cancelling N_wall on both sides:
μ_wall = μ_floor / cosθ
Solving for θ:
cosθ = μ_floor / μ_wall
θ = arccos(μ_floor / μ_wall)
Substituting the values for μ_floor and μ_wall:
θ = arccos(0.56 / 0.56)
θ = arccos(1)
θ = 0 degrees
Therefore, the smallest angle the ladder can make with the floor without slipping is 0 degrees. In other words, the ladder can lie flat on the floor without slipping.
Learn more about angle from the given link
https://brainly.com/question/25716982
#SPJ11
suppose that the magnitude of the charge on the yellow sphere is determined to be 2q2q . calculate the charge qredqredq red on the red sphere. express your answer in terms of qqq , d1d1d 1 , d2d2d 2 , and θθtheta .
To calculate the charge qred on the red sphere, we need to use the concept of Coulomb's Law. According to Coulomb's Law, the electric force between two charges is given by the equation:
F = k * (q1 * q2) / r^2
Where F is the force between the charges, k is the electrostatic constant, q1 and q2 are the magnitudes of the charges, and r is the distance between the charges. In this case, we have the yellow sphere with charge magnitude 2q, and the red sphere with charge magnitude qred. The distance between the spheres can be expressed as d1 + d2.
Now, let's assume that the force between the charges is zero when the charges are in equilibrium. Therefore, we have: F = 0
k * (2q * qred) / (d1 + d2)^2 = 0
Now, solving for qred:
2q * qred = 0
qred = 0 / (2q)
Therefore, the charge qred on the red sphere is 0.
To know more about charge visit :
https://brainly.com/question/13871705
#SPJ11
The following three questions relate to the following information: The fundamental frequency of a string 2.40 m long, fixed at both ends, is 22.5 Hz.
What is the wavelength of the wave in the string at its fundamental frequency? (a) 0.11 m (b) 1.20 m (c) 2.40 m (d) 4.80 m 17.
The frequencies of the first two overtones that may be formed by this length of string are (a) 45 Hz and 67.5 Hz (b) 45 Hz and 90 Hz (c) 22.5 Hz and 45 Hz (d) 67.5 Hz and 90 Hz 18. The speed of the wave in this string is (compare with the velocity of sound in air : 346 m s−1 ), (a) 54 m s−1 (b) 108 m s−1 (c) 216 m s−1 (d) 346 m s−1
The wavelength of the wave in the string at its fundamental frequency is option (d) 4.80 m.
The frequencies of the first two overtones that may be formed by this length of string is option (a) 45 Hz and 67.5 Hz.
The speed of the wave in this string is option (b) 108 m/s.
The wavelength of the wave in the string at its fundamental frequency can be calculated as follows:
Given, Length of the string, L = 2.40 m
Fundamental frequency of the string, f1 = 22.5 Hz
The formula to calculate the wavelength is:
wavelength = (2 × L)/n
Where, n = the harmonic number.
The given frequency is the fundamental frequency. Therefore, n = 1. Substituting the values, we get:
wavelength = (2 × L)/n
wavelength = (2 × 2.40 m)/1
= 4.80 m
Hence, the correct option is (d) 4.80 m.
Frequencies of the first two overtones that may be formed by this length of the string are given by the formula:
frequencies of overtones = n × f1
where, n = 2, 3, 4, 5, 6…Substituting the value of f1, we get:
frequencies of overtones = n × 22.5 Hz
At n = 2, frequency of the first overtone = 2 × 22.5 Hz
= 45 Hz
At n = 3, frequency of the second overtone = 3 × 22.5 Hz
= 67.5 Hz
Therefore, the correct option is (a) 45 Hz and 67.5 Hz.
The speed of the wave in the string can be calculated using the formula:
v = f × λ
where, v = velocity of the wave, f = frequency of the wave, and λ = wavelength of the wave.
Substituting the values of v, f, and λ, we get:
v = 22.5 Hz × 4.80 mv
= 108 m/s
Therefore, the correct option is (b) 108 m/s.
Learn more About wavelength from the given link
https://brainly.com/question/10750459
#SPJ11
Mass on Incline Points:2 A spring, of negligible mass and which obeys Hooke's Law, supports a mass M on an incline which has negligible friction. The figure below shows the system with mass M in its equilibrium position. The spring is attached to a fixed support at P. The spring in its relaxed state is also illustrated. 80 70 60 WWWWWWWWWUnstreched spring Mamma SA y (in cm) 40 30 20 10 0 10 20 30 40 50 60 70 80 90 100110 6 X (in cm) Mass M has a value of 195 g. Calculate k, the spring constant. Submit Answer Tries 0/10 The mass oscillates when given a small displacement from its equilibrium position along the incline. Calculate the period of oscillation. Sukamil Answer Tries 0/10
The period of oscillation of the mass is 0.86 seconds (approx).
Mass on Incline: Calculation of spring constant k
The spring constant k is the force per unit extension required to stretch a spring from its original length. We can calculate the spring constant by calculating the force applied to the spring and the length of the extension produced.
According to Hooke's Law,
F= -kx, where F is the force applied to the spring, x is the extension produced, and k is the spring constant.
Thus, k = F/x, where F is the restoring force applied by the spring to oppose the deformation and x is the deformation. From the given problem, we have the mass of the object M as 195 g or 0.195 kg.
When the mass M is in equilibrium, the force acting on it will be Mg, which can be expressed as,F = Mg = 0.195 kg × 9.8 m/s2 = 1.911 N.
Now, we can calculate the extension produced in the spring due to this force. At equilibrium, the spring is neither stretched nor compressed. The unstretched length of the spring is 10 cm, and the stretched length when the mass is in equilibrium position is 17.5 cm, as given in the figure above.
Hence, the extension produced in the spring is,
x = 17.5 − 10
= 7.5 cm
= 0.075 m.
Hence, the spring constant k can be calculated ask =
F/x = 1.911/0.075
= 25.48 N/m.
Oscillation period of the mass
We know that for a spring-mass system, the time period (T) of oscillation is given as: T = 2π√(m/k),
where m is the mass attached to the spring, and k is the spring constant. From the given problem,
m = 195 g or 0.195 kg, and k = 25.48 N/m.
Thus, the oscillation period can be calculated as:
T = 2π√(0.195/25.48)
= 0.86 s (approx).
Therefore, the period of oscillation of the mass is 0.86 seconds (approx).
To learn more about equilibrium visit;
https://brainly.com/question/30694482
#SPJ11
What do you understand by quantum tunnelling? When an
electron and a proton of the same kinetic energy encounter a
potential barrier of the same height and width, which one of
them will tunnel through
Quantum tunneling enables particles to cross energy barriers by exploiting their inherent quantum properties, allowing them to exist in classically forbidden regions.
Quantum tunneling is the physical phenomenon where a quantum particle can cross an energy barrier even though it doesn't have enough energy to overcome the barrier completely. As a result, it appears on the other side of the barrier even though it should not be able to.
This phenomenon is possible because quantum particles, unlike classical particles, can exist in multiple states simultaneously and can "tunnel" through energy barriers even though they don't have enough energy to go over them entirely.
Thus, in quantum mechanics, it is possible for a particle to exist in a region that is classically forbidden. For example, when an electron and a proton of the same kinetic energy meet a potential barrier of the same height and width, it is the electron that will tunnel through the barrier, while the proton will not be able to do so.
To learn more about Quantum tunneling
https://brainly.com/question/29707109
#SPJ11
Dock The object in the figure is a depth d= 0.750 m below the surface of clear water. The index of refraction n of water is 1.33. d Water (n=1.33) Object D What minimum distance D from the end of the dock must the object be for it not to be seen from any point on the end of the dock? D = m Assume that the dock is 2.00 m long and the object is at a depth of 0.750 m. If you changed the value for index of refraction of the water to be then you can see the object at any distance beneath the dock. Dock The object in the figure is a depth d = 0.750 m below the surface of clear water. The index of refraction n of water is 1.33. d Water (n=1.33) Object D What minimum distance D from the end of the dock must the object be for it not to be seen from any point on the end of the dock? D= m m Assume that the dock is 2.00 m long and the object is at a depth of 0.750 m. If you changed the value for index of refraction of the water to be then you less than a maximum of beneath the dock. greater than a minimum of Dock The object in the figure is a depth d = 0.750 m below the surface of clear water. The index of refraction n of water is 1.33. d Water (n=1.33) Object D What minimum distance D from the end of the dock must the object be for it not to be seen from any point on the end of the dock? D = m Assume that the dock is 2.00 m long and the object is at a depth of 0.750 m. If you changed the value for index of refraction of the water to be then you can see the object at any distance b 1.07, lock 1.33, 1.00,
The image provided shows a dock with a length of 2.00 m, with an object placed at a depth d of 0.750 m below the surface of clear water having a refractive index of 1.33. We need to determine the minimum distance D from the end of the dock, such that the object is not visible from any point on the end of the dock.
The rays of light coming from the object move towards the surface of the water at an angle to the normal, gets refracted at the surface and continues its path towards the viewer's eye. The minimum distance D can be calculated from the critical angle condition. When the angle of incidence in water is such that the angle of refraction is 90° with the normal, then the angle of incidence in air is the critical angle. The angle of incidence in air corresponding to the critical angle in water is given by: sin θc = 1/n, where n is the refractive index of the medium with higher refractive index. In this case, the angle of incidence in air corresponding to the critical angle in water is:
[tex]sin θc = 1/1.33 ⇒ θc = sin-1(1/1.33) = 49.3°[/tex]As shown in the image below, the minimum distance D from the end of the dock can be calculated as :Distance[tex]x tan θc = (2.00 - D) x tan (90 - θc)D tan θc = 2.00 tan (90 - θc) - D tan (90 - θc)D tan θc + D tan (90 - θc) = 2.00 tan (90 - θc)D = 2.00 tan (90 - θc) / (tan θc + tan (90 - θc))D = 2.00 tan 40.7° / (tan 49.3° + tan 40.7°)D = 0.90 m[/tex]Therefore, the minimum distance D from the end of the dock, such that the object is not visible from any point on the end of the dock is 0.90 m .If the refractive index of the water is changed to be less than a maximum of 1.07, then we can see the object at any distance beneath the dock. This is because the critical angle will be greater than 90° in this case, meaning that all rays of light coming from the object will be totally reflected at the surface of the water and will not enter the air above the water.
To know more about minimum distance visit:
brainly.com/question/1416206
#SPJ11
Fifteen identical particles have various speeds. One has a speed of 4.00 m/s, two have a speed of 5.00 m/s, three have a speed of 7.00 m/s, four have a speed of 5.00 m/s, three have a speed of 10.0 m/s and two have a speed of 14.0 m/s. Find (a) the average speed, (b) the rms speed, and (c) the most probable speed of these particles. (a) 7.50 m/s; (b) 8.28 m/s; (c) 14.0 m/s (a) 7.50 m/s; (b) 8.28 m/s; (c) 5.00 m/s (a) 7.53 m/s; (b) 8.19 m/s; (c) 14.0 m/s (a) 7.53 m/s; (b) 8.19 m/s; (c) 5.00 m/s Page 24 of 33
The correct answers are (a) 7.53 m/s, (b) 8.19 m/s, and (c) 5.00 m/s. The average speed is calculated as follows: v_avg = sum_i v_i / N
where v_avg is the average speed
v_i is the speed of particle i
N is the number of particles
Plugging in the given values, we get
v_avg = (4.00 m/s + 2 * 5.00 m/s + 3 * 7.00 m/s + 4 * 5.00 m/s + 3 * 10.0 m/s + 2 * 14.0 m/s) / 15
= 7.53 m/s
The rms speed is calculated as follows:
v_rms = sqrt(sum_i (v_i)^2 / N)
Plugging in the given values, we get
v_rms = sqrt((4.00 m/s)^2 + 2 * (5.00 m/s)^2 + 3 * (7.00 m/s)^2 + 4 * (5.00 m/s)^2 + 3 * (10.0 m/s)^2 + 2 * (14.0 m/s)^2) / 15
= 8.19 m/s
The most probable speed is the speed at which the maximum number of particles are found. In this case, the most probable speed is 5.00 m/s.
Learn more about rms speed here:
brainly.com/question/33262591
#SPJ11
4. A circular disk of radius 25.0cm and rotational inertia 0.015kg.mis rotating freely at 22.0 rpm with a mouse of mass 21.0g at a distance of 12.0cm from the center. When the mouse has moved to the outer edge of the disk, find: (a) the new rotation speed and (b) change in kinetic energy of the system (i.e disk plus mouse). (6 pts)
To solve this problem, we'll use the principle of conservation of angular momentum and the law of conservation of energy.
Given information:
- Radius of the disk, r = 25.0 cm = 0.25 m
- Rotational inertia of the disk, I = 0.015 kg.m²
- Initial rotation speed, ω₁ = 22.0 rpm
- Mass of the mouse, m = 21.0 g = 0.021 kg
- Distance of the mouse from the center, d = 12.0 cm = 0.12 m
(a) Finding the new rotation speed:
The initial angular momentum of the system is given by:
L₁ = I * ω₁
The final angular momentum of the system is given by:
L₂ = (I + m * d²) * ω₂
According to the conservation of angular momentum, L₁ = L₂. Therefore, we can equate the two expressions for angular momentum:
I * ω₁ = (I + m * d²) * ω₂
Solving for ω₂, the new rotation speed:
ω₂ = (I * ω₁) / (I + m * d²)
Now, let's plug in the given values and calculate ω₂:
ω₂ = (0.015 kg.m² * 22.0 rpm) / (0.015 kg.m² + 0.021 kg * (0.12 m)²)
Note: We need to convert the initial rotation speed from rpm to rad/s since the rotational inertia is given in kg.m².
ω₁ = 22.0 rpm * (2π rad/1 min) * (1 min/60 s) ≈ 2.301 rad/s
ω₂ = (0.015 kg.m² * 2.301 rad/s) / (0.015 kg.m² + 0.021 kg * (0.12 m)²)
Calculating ω₂ will give us the new rotation speed.
(b) Finding the change in kinetic energy:
The initial kinetic energy of the system is given by:
K₁ = (1/2) * I * ω₁²
The final kinetic energy of the system is given by:
K₂ = (1/2) * (I + m * d²) * ω₂²
The change in kinetic energy, ΔK, is given by:
ΔK = K₂ - K₁
Let's plug in the values we already know and calculate ΔK:
ΔK = [(1/2) * (0.015 kg.m² + 0.021 kg * (0.12 m)²) * ω₂²] - [(1/2) * 0.015 kg.m² * 2.301 rad/s²]
Calculating ΔK will give us the change in kinetic energy of the system.
Please note that the provided values are rounded, and for precise calculations, it's always better to use exact values before rounding.
Learn more about angular momentum here: brainly.com/question/29897173
#SPJ11
Calculate the mass of ice that remains at thermal equilibrium when 1 kg of ice at -43°C is added to 1 kg of water at 24°C. Please report the mass of ice in kg to 3 decimal places. Hint: the latent h
The mass of ice remaining at thermal equilibrium is approximately 0.125 kg, assuming no heat loss or gain from the environment.
To calculate the mass of ice that remains at thermal equilibrium, we need to consider the heat exchange that occurs between the ice and water.
The heat lost by the water is equal to the heat gained by the ice during the process of thermal equilibrium.
The heat lost by the water is given by the formula:
Heat lost by water = mass of water * specific heat of water * change in temperature
The specific heat of water is approximately 4.186 kJ/(kg·°C).
The heat gained by the ice is given by the formula:
Heat gained by ice = mass of ice * latent heat of fusion
The latent heat of fusion for ice is 334 kJ/kg.
Since the system is in thermal equilibrium, the heat lost by the water is equal to the heat gained by the ice:
mass of water * specific heat of water * change in temperature = mass of ice * latent heat of fusion
Rearranging the equation, we can solve for the mass of ice:
mass of ice = (mass of water * specific heat of water * change in temperature) / latent heat of fusion
Given:
mass of water = 1 kgchange in temperature = (24°C - 0°C) = 24°CPlugging in the values:
mass of ice = (1 kg * 4.186 kJ/(kg·°C) * 24°C) / 334 kJ/kg
mass of ice ≈ 0.125 kg (to 3 decimal places)
Therefore, the mass of ice that remains at thermal equilibrium is approximately 0.125 kg.
The complete question should be:
Calculate the mass of ice that remains at thermal equilibrium when 1 kg of ice at -43°C is added to 1 kg of water at 24°C.
Please report the mass of ice in kg to 3 decimal places.
Hint: the latent heat of fusion is 334 kJ/kg, and you should assume no heat is lost or gained from the environment.
To learn more about thermal equilibrium, Visit:
https://brainly.com/question/14556352
#SPJ11
A parallel beam of light containing orange (610 nm) and blue (470 nm) wavelengths goes from fused quartz to water, striking the surface between them at a 35.0° incident angle. What is the angle between the two colors in water? Submit Answer Incorrect. Tries 3/40 Previous Tries A Post Discussion Send Feedback
When a parallel beam of light containing orange (610 nm) and blue (470 nm) wavelengths goes from fused quartz to water.
striking the surface between them at a 35.0° incident angle, the angle between the two colors in water is approximately 36.8°.Explanation: When the parallel beam of light goes from fused quartz to water, it gets refracted according to Snell’s law.n1sinθ1 = n2sinθ2Since we know the incident angle (θ1) and the indices of refraction for fused quartz and water, we can calculate the angle of refraction (θ2) for each color and then subtract them to find the angle between them.θ1 = 35.0°n1 (fused quartz) = 1.46n2 (water) = 1.33.
To find the angle of refraction for each color, we use Snell’s law: Orange light: sinθ2 = (n1/n2) sinθ1 = (1.46/1.33) sin(35.0°) = 0.444θ2 = sin−1(0.444) = 26.1°Blue light: sinθ2 = (1.46/1.33) sin(35.0°) = 0.532θ2 = sin−1(0.532) = 32.5°Therefore, the angle between the two colors in water is:32.5° − 26.1° ≈ 6.4° ≈ 36.8° (to one decimal place)Answer: Approximately 36.8°.
To know more about beam visit:
https://brainly.com/question/31324896
#SPJ11
Find the density of dry air if the pressure is 23’Hg and 15
degree F.
The density of dry air at a pressure of 23 inHg and 15 °F is approximately 1.161 g/L.
To find the density of dry air, we use the ideal gas law, which states:
PV = nRT
Where:
P is the pressure
V is the volume
n is the number of moles of gas
R is the ideal gas constant
T is the temperature
the equation to solve for the density (ρ), which is mass per unit volume:
ρ = (PM) / (RT)
Where:
ρ is the density
P is the pressure
M is the molar mass of air
R is the ideal gas constant
T is the temperature
Substitute the given values into the formula:
P = 23 inHg
(convert to SI units: 23 * 0.033421 = 0.768663 atm)
T = 15 °F
(convert to Kelvin: (15 - 32) * (5/9) + 273.15 = 263.15 K)
The approximate molar mass of air can be calculated as a weighted average of the molar masses of nitrogen (N₂) and oxygen (O₂) since they are the major components of air.
M(N₂) = 28.0134 g/mol
M(O₂) = 31.9988 g/mol
The molar mass of dry air (M) is approximately 28.97 g/mol.
R = 0.0821 L·atm/(mol·K) (ideal gas constant in appropriate units)
let's calculate the density:
ρ = (0.768663 atm * 28.97 g/mol) / (0.0821 L·atm/(mol·K) * 263.15 K)
ρ ≈ 1.161 g/L
Therefore, the density of dry air at a pressure of 23 inHg and 15 °F is approximately 1.161 g/L.
Learn more about density on the given link:
https://brainly.com/question/1354972
#SPJ11