Answer:
353 ppm
Explanation:
PPM also refers to parts per million, it represents a low concentration of a solution. It represents 0.001 gram or a milligram in 1000 mL, equivalent to 1 mg per liter
Given that;
276 mg of Ca in 780.0 g of water
1 ppm = 1 mg/L
780 g = 780 mL = 0.78 L
Therefore;
= 276 mg/ 0.78 L
= 353.84mg/L
= 353 ppm
less energy was entering Earth's
2. When more energy enters than exits the Earth system, what happens to temperatures on Earth?
(select one)
The temperatures on Earth increase
The temperatures on Earth decrease
The temperatures on Earth do not change
「ロロロ
Answer:
The temperatures on Earth increase
Explanation:
more energy results in more heat.
Is this equation right?
Answer:
no
Explanation:
because the characters are invalid
Answer:
no
Explanation:
because they are not valid
A hydrate of copper (II) chloride, CuCl2∙nH2O, is heated until the mass of the anhydrate remains constant at 19.72 g, indicating a loss of 5.32 g of water. How many moles of water are present for each mole of salt in the original hydrate? (Find n.)
Answer:
n = 2
Explanation:
To solve this question we must find the moles of the anhydrate CuCl2 (Obtained from the mass of 19.72g) and the moles of water (Obtained from the 5.32g):
Moles CuCl2 -Molar mass: 134.45g/mol-
19.72g * (1mol / 134.45g) = 0.14667 moles
Moles H2O -Molar mass 18.01g/mol-
5.32g * (1mol / 18.01g) = 0.2954 moles
The ratio of moles of H2O:CuCl2 is:
0.2954 moles / 0.14667moles = 2.0
That means n = 2 and the formula is:
CuCl2∙2H2O
Name this compound according to IUPAC nomenclature rules.
A) nitrogen oxide
B) nitrogen oxygen
C) nitrogen monoxide
D) Mononitrogen monoxide
Answer:
B: nitrogen oxygen
Explanation:
Hope it helps you thanks!!
Explain why is it a good idea for the eco-house to have both a wind turbine and solar panels?
Answer:
Explanation:
Wind is more of an efficient power source than solar. Compared to solar panels, wind turbines release less CO2 to the atmosphere, consume less energy, and produce more energy.
10 points. Any help is appreciated.
Answer:
I dont see the image
Explanation:
pls make it close up
Pleaseeee help I’m desperate
If u can answer all three of them
I’ll give you brainliest
Answer:
5.80
Explanation:
Dissolved hydrofluoric acid reacts with dissolved sodium hydroxide to form water and aqueous sodium fluoride
Answer:
HF(aq)+NaOH(aq)→NaF(aq)+H2O(l)
Explanation:
Complete question
Dissolved hydrofluoric acid reacts with dissolved sodium hydroxide to form water and aqueous sodium fluoride. What is the net ionic equation
Equilibrium equation between the undissociated acid and the dissociated ions
HF(aq)⇌H+(aq)+F−(aq)
Sodium hydroxide will dissociate aqueous solution to produce sodium cations, Na+, and hydroxide anions, OH−
NaOH(aq)→Na+(aq)+OH−(aq)
Hydroxide anions and the hydrogen cations will neutralize each other to produce water.
H+(aq)+OH−(aq)→H2O(l)
On combining both the equation, we get –
HF(aq)+Na+(aq)+OH−(aq)→Na+(aq)+F−(aq)+H2O(l)
The Final equation is
HF(aq)+NaOH(aq)→NaF(aq)+H2O(l)
If the final mass of the system is 120g, what was the percent yield of the reaction?
Answer:
Sorry for the wrong answer plz
99% was the percent yield of the reaction. So, the correct option is A.
What is Percent yield?Percent yield is defined as the percentage ratio of the actual yield to the theoretical yield. It is a measure of the amount of moles of product formed in relation to the reactant obtained in a chemical reaction, expressed as a percentage.
For percent yield, we have to first find the number of moles.
1 Mg(S) + 2 HCl(Aq) → 1 MgCl2(Aq) + 1 H2(G)
Mole of Mg (s)= Mass of Mg/ Molar mass
=48/24= 2 moles
Moles of HCl= 73/36.5= 2moles
So, 1 mole of Mg reacts with 2 moles of HCl as per the equation which means HCl is the limiting reagent. Mg will act as excess reagent so only 1 mole of Mg will react while the unreacted Mg will be 24g i.e. 1 mole.
The product which is experimental= 120-24= 96g
Theoretical product formed= 1mole of [tex]MgCl_2[/tex]+ 1 mole of HCl= 95+2= 97gm/mole
Percentage Yield = (experimental Yield / Theoretical Yield) × 100 %
= (96/97)*100 = 98.96% which is approx. 99%
Thus, 99% was the percent yield of the reaction. So, the correct option is A.
Learn more about Percent yield, here:
https://brainly.com/question/17042787
#SPJ2
Your question is incomplete, most probably the complete question is:
The Following Reaction Is Carried Out:
1 Mg(S) + 2 HCl(Aq) → 1 MgCl2(Aq) + 1 H2(G)
The Initial Masses Of The Uncombined Reactants appear below:
Mass of magnesium- 48g
mass of hydrochloric acid= 73g
The reactants are combined and the final mass of the system is determined. If the final mass of the system is 120g, what was the percent yield of the reaction?
99%50%1%25%what happens if water is added to concentrated acid
Answer:
Heat is released when they are both mixed together.
Explanation:
Fullerenes (like the one shown) are made up of hexagonal rings of carbon atoms (like in graphite or graphene) and alternating pentagonal and heptagonal carbon rings to allow curvature of the surface producing molecules that have a complete hollow shape.
The extremely small diameter of the nanoparticle fullerenes (which act like a cage) allows them to readily pass through cell membranes and be readily absorbed into the body.
What potential benefit does this have in the pharmaceutical industry as well as medicine?
A)
The very small fullerene molecules would keep cancer cells from invading other healthy cells. As a result, it would keep cancer from spreading.
B)
The very small fullerene molecules could allow surgeons to see the insides of cells with tiny cameras as they perform complex surgery.
C)
The very small fullerene molecules could obstruct hazardous chemicals from getting into absorbed into cells.
D)
The very small fullerene molecules could easily deliver drugs directly into cells in a highly controlled manner.
Answer:
Your answer choice is D
Explanation:
I just got it right on USATestprep :))
How are ionic bonds formed?
Multiple choice question.
A)
loss of electrons by atoms
B)
sharing of electrons between atoms
C)
electrostatic forces between ions
D)
gain of electrons by atoms
Answer:
c
Explanation:
Answer:
Same type of question from quizlet
But the answer is C
I hope you got it right :)
(1) We are sorry to say that we will not be able to publish your short story "Max versus the Robots in the school literary magazine. (2) Our editorial board enjoyed the story's creative setting and interesting characters. (3) However, the board ultimately decided that the plot was too confusing, and several members found the ending to be implausible. (4) In addition, some readers were concerned that the technical details about robots were totally boring. (5) Although we have to reject this story, we hope to publish your work in the future, so please submit a story to us again. Which option best revises this paragraph to maintain a formal tone throughout? (T) A. Replace sentence 4 with: In addition, some readers were concerned that the technical details about robots would not be of interest to most students. B. Replace sentence 2 with: The creative setting was enjoyed by the board, and the interesting characters were appreciated bynbe board as well! c. Replace sentence 5 with: While it is with great regret that we must rebuff your literary endeavor, we would like to disseminate a future opus penned by you If you would be so kind as to dispatch an additional work to us for our consideration. 0 D. Replace sentence 3 with: But the editorial board ultimately decided that the plot was too confusing, and several members had no clue what the deal was with the ending,
B.
Replace sentence 4 with: In addition, some readers were concerned that the technical details about robots would not be of interest to most students.
Explanation:
i just did the test
Answer:
It's B.
Explanation:
Which of these is true for a fission reaction?
A. it is an endothermic reaction
B.a heavy nucleus splits into two smaller nuclei
C.two light nuclei combine to form a single heavier nucleus
D.it is an interaction between valence electrons of a atom.
Answer:
Explanation:
The answer is B heavy nucleus splits into two smaller nuclei
Find the pH of a solution with a [H+] of 0.045M.
Answer:
1.35Explanation:
The pH of a solution can be found by using the formula
[tex]pH = - log ([ {H}^{+} ])[/tex]
From the question
[H+] = 0.045 M
We have
[tex]pH = - log(0.045) \\ = 1.346787...[/tex]
We have the final answer as
1.35Hope this helps you
Answer:
1.35
Explanation:
1. Does warm air rise or sink? Does cold air rise or sink?
2. Air pressure can be high or low. Does air flow from low to high pressure or from high to low pressure?
3. Which is heavier—warm air or cold air?
4. Which has higher air pressure—warm air or cold air? How do you know?
5. Global circulation cells occur because of uneven heat distribution and the earth's rotation. What do we call the effect of the earth's rotation on air circulation?
Answer:
1. Hot air rises and cold air descends for exactly the same reason
Matter are anything that is made up of atoms. The quantity of matter can be seen only on the basis of mass and volume calculation. Therefore, warm air rise and cold air sink.
What is matter?Matter is a substance that has some mass and can occupy some volume. The matter is mainly used in science.
Matter is anything that is made up of atoms. Mass can also be represented as number of molecules. We also saw that matter occupy some volume and that volume is measured only in liter.
Warm air rises while cold air descends. This is because hotter air takes more energy than cooler air. Furthermore, hot and cold temperatures are precisely proportionate to their density. As a result, when it's really hot, the hotter air is more likely to rise than when it's very cold.
Therefore, warm air rise and cold air sink.
To learn more about matter, here:
https://brainly.com/question/4562319
#SPJ2
How much heat is required to raise the temperature of a sample of copper from 0.0°C to 55.0°C, if its specific heat is 0.384 J/g°C and its mass is 10.00 g? Group of answer choices 351.4 2110 211.2 3.54
Answer:
211.2 J
Explanation:
Applying
Q = cm(t₁-t₂)............... Equation 1
Where Q = Amount of heat, c = specific heat capacity of copper, m = mass of copper, t₁ = initial temperature, t₂ = final temperature.
From the question,
Given: c = 0.384 J/g°C, m = 10 g, t₁ = 0°C, t₂ = 55°C
Substitute these value into equation 1
Q = 0.384×10×(55-0)
Q = 0.384×10×55
Q = 211.2 J
Chemistry help!
Zoom in to see better!!
Answer:
2.5 moles of Al
Explanation:
We'll begin by calculating the number of mole in 127 g of Al₂O₃. This can be obtained as follow:
Mass of Al₂O₃ = 127 g
Molar mass of Al₂O₃ = 101.961 g/mol
Mole of Al₂O₃ =?
Mole = mass / molar mass
Mole of Al₂O₃ = 127 / 101.961
Mole of Al₂O₃ = 1.25 mole
Finally, we shall determine the number of mole of Al that reacted. This can be obtained as follow:
4Al + 3O₂ —> 2Al₂O₃
From the balanced equation above,
4 moles of Al reacted to produce 2 moles of Al₂O₃.
Therefore, Xmol of Al will react to produce 1.25 moles of Al₂O₃ i.e
Xmol of Al = (1.25 × 4)/2
Xmol of Al = 2.5 moles.
Thus, 2.5 moles of Al is needed for the reaction.
A volume of 3.0 L of air is warmed from 50 degrees celsius to 100 degrees celsius. What is the new volume if the pressure remains constant?
Answer:
3.45 L
Explanation:
Temperature and volume are linearly related (when one increases or decreases, so does the other).
Convert the temperature to Kelvin:
50 °C = 323 K
100 °C = 373 K
To find the rate of change, divide 373 by 323 to get roughly 1.15
Multiply the amount of liters by this factor to get your answer
FIRST GETS BRAINLIEST (THE ONE THAT IS CORRECT)
A generator changes (Mechanical, Electrical, Static) energy into
(Mechanical, Electrical, Magnetic) energy.
Answer:
mechanical energy to electrical energy
Explanation:
The water turns the turbine with produces mechanical energy so the generator converts it to electrical energy
This gardener started with much smaller plants in this park. Over time, the garden has grown into a large display of brilliant flowers. What would you tell the gardener to explain how the plants have grown and flourished so successfully?
44.0L of O2 react with excess Sulfur dioxide gas. All gases are kept at the same temperature, pressure, and volume. What will be the theoretical yield of Sulfur trioxide gas in Liters?
Answer:
The theoretical yield of sulfur trioxide is 88.0 Litres
Explanation:
The chemical reaction occurring between oxygen and sulfur dioxide is given in the chemical equation below :
2SO₂ + O₂ ----> 2SO₃
From the equation of reaction, 2 moles of sulfur dioxide reacts with 1 mole of oxygen to produce 2 moles of sulfur trioxide.
Volume of 1 mole of a gas at STP is 22.4 L
Number of moles of gas in 44.0 L = 44.0/22.4 moles
1 mole of oxygen reacts with 2 moles sulfur dioxide to produce 2 moles of sulfur trioxide;
44/22.4 moles of oxygen will react with excess sulfur dioxide to produce 2 × 44/22.4 moles of sulfur trioxide = 88/22.4 moles of sulfur trioxide
88/22.4 moles of sulfur trioxide will have a volume of 88/22.4 × 22.4 Litres = 88.0 Litres
Therefore, the theoretical yield of sulfur trioxide is 88.0 Litres
PLS HELP NO LINKS PLS
What percentage of stars do Kepler scientists suggest host Earth size planets?
10.2%
2.6%
5.4%
15.9%
so the other guy can have branliest have a wonderful summer guys! :)
Work out the relative formula mass of ammonium nitrate, NH4NO3.
Relative atomic masses: H 1; N 14; O 16.
...........................................................................................................................
...........................................................................................................................
Relative formula mass of ammonium nitrate = ...............................
Answer:
The relative molecular mass of ammonium nitrate is 80 gm
Explanation:
[tex]M_{NH4NO3}[/tex] = 14 + (4 × 1) + 14 + (16 × 3) = 80 (gm)
What design element of an astronaut's spacesuits protects him or her from micrometeoroids, which are tiny bits of space debris travelling at high speeds?
Answer:
Tough outer shell
Explanation:
Three types of space suits based on their purpose are IVA (Intravehicular activity), EVA (extravehicular activity), and IEVA (intra/extravehicular activity)
Space suits have an outer layer known as the Integrated Thermal Micrometeoroid Garment also known as the TMG or ITMG
The functions of the TMG includes the provision of an insulation medium to the wearer of the suit thereby preventing loss of heat and keeping the wearer warm, protect the wearer from solar radiation which are harmful as well as from Micrometeoroid and debris orbiting in space known as MMOD
The outermost layer of the EMU TMG suits is white Ortho-Fabric that consists of Nomex, Kevlar and Gore-Tex, making it fire resistant, very strong and very tough, and water proof as well as breathable.
What is Dalton’s Law as it applies to partial pressures?
Answer:
According to Dalton's law of partial pressures, the total pressure by a mixture of gases is equal to the sum of the partial pressures of each of the constituent gases. The partial pressure is defined as the pressure each gas would exert if it alone occupied the volume of the mixture at the same temperature.
Based on the electron configuration of the two atoms, predict the ratio of metal cationic (+) atom to nonmetal anionic (-) atom in the compound. sodium and bromine
Answer:
A. 1:1
Explanation:
The ratio of metal cationic (+) atom to nonmetal anionic (-) atom in the sodium and bromine compound is 1:1 because sodium needs to lose one electron and bromine needs one electron to become stable and complete its outermost shell. When sodium lose electron, it become cation and gain +1 charge while on the other hand, the bromine accept one electron and become anion and gain -1 charge so that's why we can say that there is 1:1 of metal cationic (+) atom to nonmetal anionic (-) atom in the sodium and bromine compound.
What do polar bonds share with electrons?
Answer:
Polar Covalent Bonds. A polar covalent bond exists when atoms with different electronegativities share electrons in a covalent bond. Consider the hydrogen chloride (HCl) molecule. Each atom in HCl requires one more electron to form an inert gas electron configuration.
Explanation:
At 15 mph, how long does it take to travel 15 miles?
Answer:
1 hour
Explanation:
Travelling at 15 miles per hour will get take 1 hour to travel 15 miles.
Please and thank you in advance. Due today
Answer:
Sorry I really don't know but can you help with one of my question I posted please thanks.