A 56.0 kg diver strikes the water at a speed of 13.9 m/s, then slows to a stop underwater in 0.65 s What is the momentum of the diver as she strikes the water?

Answer:

b and c

Explanation:

its correct

Answer:

Equivalent Resistance of Resistors in Parallel is

1/R = 1/r1 + 1/r2 .....

1/R = 1/7 + 1/7 + 1/7

R= 7/3

R=2.33ohms

Answer: The question is incomplete because the options are not given here are the options gotten from Another website.

A. Ultraviolet light detects the presence of radioactive substances.

B.Ultraviolet light shows cold areas as blue and warm areas as red.

C.Ultraviolet light causes substances to fluoresce and give off visible light.

D. Ultraviolet light transmits information to AM and FM radio receivers.

The correct option is C.

Ultraviolet light causes substances to fluoresce and give off visible light

Explanation:

This is because UV light radiates at a very short wavelengths compared to visible light which is impossible for humans to see it. Therefore , when UV light is absorbed by some particular materials, it reflect back towards the eye as visible radiation with a longer wavelength .This process is called UV-induced visible fluorescence.

Projectile motion is  a motion where an object moves in a bilaterally symmetrical path

Projectile motion is a form of motion experienced by an object or particle that is projected near Earth's surface and moves along a curved path under the action of gravity only.

If an object is thrown up by making a certain angle with respect to  ground ( let say theta) up in the sky , it will reach a maximum height after which it follows a symmetrical path as it comes down due to  the action of gravity . The path followed from the beginning till end will be a parabolic in this case .

It is a motion where an object moves in a bilaterally symmetrical path .

Projectile motion only occurs when there is only one force applied at the beginning of the trajectory, after been released object comes in the action of gravity .

General form of equation of trajectory  of Projectile motion   can be written as :

y = x tan(theta ) - g(x^2)/(2(u^2)cos^2(theta))

where y = horizontal component

           x = vertical component

           g = gravity

           u = initial velocity

           theta = angle of inclination of the initial velocity from horizontal axis

learn more about Projectile motion   :

https://brainly.com/question/11049671?referrer=searchResults

#SPJ3

Answer: 350 N

Explanation:

Given

Mass of ball is [tex]0.5\ kg[/tex]

Speed of ball after rebound is [tex]v=2\ m/s[/tex]

Time period for impulse [tex]t=0.01\ s[/tex]

Impulse imparted in equal to the change in the momentum of object

[tex]\Rightarrow J=m(v-u)\quad [\text{u=speed of ball before collision}]\\\Rightarrow J=0.5\times \left(2-(-5)\right)\\\Rightarrow J=0.5\times 7\\\Rightarrow J=3.5\ N.s[/tex]

Impulse is the product of average force and duration of application

[tex]\Rightarrow J=F_{avg}\cdot \Delta t\\\Rightarrow 3.5=F_{avg}\times 0.01\\\\\Rightarrow F_{avg}=350\ N[/tex]

Answer:

Force = 143.16 Newton

Explanation:

Given the following data;

Distance, S = 22 m

Initial velocity, U = 10 m/s

Final velocity, V = 25 m/s

Mass = 12 kg

To find the force acting on the box;

First of all, we would determine the acceleration of the box using the third equation of motion;

V² = U² + 2aS

25² = 10² + 2*a*22

625 = 100 + 44a

625 - 100 = 44a

525 = 44a

Acceleration, a = 525/44

Acceleration, a = 11.93 m/s²

Next, we find the force;

Force = mass * acceleration

Force = 12 * 11.93

Force = 143.16 Newton

Answer:

Acceleration = 2 m/s²

Explanation:

Given the following data;

Mass = 100 kg

Force = 200 N

To find the acceleration of Bronco's fall;

Mathematically, force is given by the formula;

Force = mass * acceleration

Substituting into the formula, we have;

200 = 100 * acceleration

Acceleration = 200/100

Acceleration = 2 m/s²

Therefore, the acceleration of his fall is 2 meters per seconds square.

Answer:

T = 486.6 K

Explanation:

The final temperature of the block can be found using the following formula:

[tex]Q = mC\Delta T\\[/tex]

where,

Q = Thermal Energy Transferred = 3.35 x 10⁵ J

m = mass of aluminum block = 2 kg

C = Specific Heat = 897 J/kg.K

ΔT = Change in Temperature = T - 300 K

T = Final Temperature of the Block = ?

Therefore,

[tex]3.35\ x\ 10^5\ J = (2\ kg)(897\ J/kg.K)(T-300\ K)\\\\5.38\ x\ 10^5\ J + 3.35\ x\ 10^5\ J = (1794 J/K)(T)\\\\T = \frac{8.73\ x\ 10^5\ J}{1794\ J/K}[/tex]

T = 486.6 K

Answer:

the rods are pointed so it can absurb the energy from the lighting and taller than the building so it hits the rod first instead of the building

Explanation:

hope this helps

∞∞∞∞∞∞∞∞∞∞

Answer:

the answer will be c

car p has twice the kinetic energy of car Q

Answer:

HERE IS YOUR ANSWER

Explanation:

1. The machines makes pur life easier.

2. It makes us do our works faster.

3. It does all the works that are harder for us.

Hope it helps you.

Explanation:  

First of all some do most of the work for us

Second, us humans are quite lazy

Third, it makes it quite easier in life

Answer:

Una secadora de cabello tiene una resistencia de 10Ω al circular una corriente de 6 Amperes, si está conectado a una diferencia de potencial de 120 V, durante 18 minutos ¿Qué cantidUna secadora de cabello tiene una resistencia de 10Ω al circular una corriente de 6 Amperes, si está conectado a una diferencia de potencial de 120 V, durante 18 minutos ¿Qué cantidad de calor produce?, expresado en caloríasad de calor produce?, expresado en calorías

Answer:

all above

Explanation:

friction is necessary to live

Answer:

All of above

Explanation:

Answer:

The purpose of step 1 is to induce magnetism into the needle, so that it retains magnetism and behaves as a magnet after the process.

Explanation:

The method of production the needle magnet in the procedure is the single stroke. This process involves a continuous stroking of a magnetic object (e.g needle) repeatedly for a period or number of times with a permanent magnet. Thus, when the permanent magnet is removed, the object retains magnetism, and behaves like a magnet.

The importance of the stroking process is the turn a magnetic object to a magnet by inducing magnetism into it.

Explanation:

P =F * v

F = m * a = 65 kg * 9.81 ms^-2 * 12 passengers

v = d/t = 150m / 64 s

I think you can calculate and substitute this units should be watts

The power needed to transport the passengers through this height is 17.933 KW or 17933 Watts.

Power can be defined as the rate at which work is done by an object. Power can be calculated by the formula:

P = W × t

where, P = power, w = work done, and t = time taken.

The SI unit for power is the watt (W), where 1 watt power is equal to 1 joule/second (1W = 1J/s). Because, the work done by an object is the energy transfer by the object, and power is also the rate at which energy is expended.

P = F × v

where, P = Power, F = Force, and V = velocity of the object

F = m × a = 65 kg × 9.81 ms⁻² × 12 passengers = 7651.8

v = d/t = 150m / 64 s = 2.343

P = 7651.8 × 2.343

P = 17,933.90

P = 17.933 KW

Learn more about Power here:

https://brainly.com/question/287674

#SPJ2

Answer: 180

Explanation: Acellus

This equation gives the magnitude of the electric field generated by a point charge Q. The distance r in the denominator is the separation between the point of interest and the point charge Q. Or the center of a spherical charge.

It is simple to determine the size of the electric field by calculating the force per charge on the test charge. From this definition, the common metric units for electric field strength are derived. Electric field units would be force units divided by charge units, as the definition of an electric field is a force per charge.

F = |qvBsin()| calculates the magnetic force's magnitude. The following factors are involved in determining the force's direction. A plane is first defined by the magnetic field vector, B, and the velocity vector, v. In or out of this plane, the magnetic force is perpendicular to it.

Therefore, The electric force F, or Coulomb force, exerted per unit positive electric charge q at that place can be used to determine an electric field's strength, or E = F/q.

Learn more about electric fields here:

https://brainly.com/question/15800304

#SPJ2

Answer:

They take the shape of their container.​

I think since they move around and fit into anything perfectly.

Answer:

Una secadora de cabello tiene una resistencia de 10Ω al circular una corriente de 6 Amperes, si está conectado a una diferencia de potencial de 120 V, durante 18 minutos ¿Qué cantidad de calor produce?, expresado en calorías

Una secadora de cabello tiene una resistencia de 10Ω al circular una corriente de 6 Amperes, si está conectado a una diferencia de potencial de 120 V, durante 18 minutos.

Dos resistencias de 30 y 20 Ω se conectan en seria a un generador que tiene una diferencia de potencial de 20 V entre sus bornes. a. Determina la resistencia equivalente de la asociación b. Dibuja el circuito y coloca un amperímetro que indique el valor de la intensidad de la corriente y unos voltímetros que muestren la diferencia de potencial entre los extremos de las resistencias.

Un efecto del paso de corriente es que parte de la energía del sistema se transforma en calor y aumenta la temperatura del circuito, lo que da lugar al efecto Joule. Ahora, imagina que un foco tiene una resistencia de 60 Ω (ohm) y consume una corriente de 2 A. Calcula el calor que dicho foco puede generar durante 1 minuto; expresa el resultado en calorías y kilocalorías. Recuerda utilizar la siguiente fórmula.

Therefore, Una secadora de cabello tiene una resistencia de 10Ω al circular una corriente de 6 Amperes, si está conectado a una diferencia de potencial de 120 V, durante 18 minutos.

Learn more about Amperes on:

https://brainly.com/question/1476646

#SPJ5

Answer:

The Answer to question 14 is : glycerol (n=1.47)

The material should be considered as the glycerol (n=1.47).

Since

a beam of monochromatic light (f=5.09 × 10^14 Hz) has a speed of 2.04× 10^8 meters per second.

Now the material should be

= 3*10^8 / 2.04× 10^8

= 1.47

Hence, The material should be considered as the glycerol (n=1.47).

Learn more about material here: https://brainly.com/question/19424938

Answer:

120°

Explanation:

straight line =   180°

light ray = 30°

the reflection will be like a mirror image

30°+30° = 60°

180° - 60° = 120°

The angle of incidence and the angle of reflection are equal

The correct option for the angle between the given light ray and the reflected ray is the option;

120°

Reason:

The given parameter are;

The angle formed by the light ray and the glass surface = 30°

Required:

To find the angle between the light ray and the reflected ray

Solution:

According to the laws of reflection, the angle between the incident ray and the normal is equal to the angle made between the reflected ray and the normal

The angle made between the incident ray and the normal, [tex]\theta _i[/tex] = 90° - 30° = 60°

Therefore, according to the laws of reflection, we have;

The angle made between the reflected ray and the normal, [tex]\theta _r[/tex] = The angle between the incident ray and the normal, [tex]\theta _i[/tex] = 60°

The angle made between the reflected ray and the normal, [tex]\theta _r[/tex] = 60°

The angle between the given light ray and reflected ray, θ = [tex]\theta _i[/tex] + [tex]\theta _r[/tex]

∴ θ = 60° + 60° = 120°

The angle between the given light ray and the reflected ray,  θ = 120°

Learn more about the laws of reflection here:

https://brainly.com/question/15847906

Answer:

less than one light year

Explanation:

earth is 0.00001581 light years away from the sun :)

Answer:

v = 0.92 c

Explanation:

Here, we will use the time dilation formula from Einstein's theory of relativity to find the speed of traveling of the friend:

[tex]t =\frac{t_o}{\sqrt{1-\frac{v^2}{c^2}}} \\\\\\\sqrt{1-\frac{v^2}{c^2}}=\frac{t_o}{t}\\\\[/tex]

where,

v = speed of traveling = ?

c = speed of light

t = time of return = 10 years

t₀ = time passed on earth = 4 years

Therefore,

[tex]\sqrt{1-\frac{v^2}{c^2}} = \frac{4\ years}{10\ years}\\\\ 1-\frac{v^2}{c^2}=(\frac{2}{5})^2\\\\\frac{v^2}{c^2} = 1-\frac{4}{25}\\\\\frac{v^2}{c^2} = \frac{21}{25}\\\\v^2 = 0.84c^2\\\\[/tex]

v = 0.92 c

Explanation:

I am not understanding your question

Answer:

C. a disturbance that travels through a medium with a transfer of energy and without a transfer of matter

Explanation:

A wave is any disturbance that transfers energy from one location to the other via a substance called medium. It is important to note that a wave only conveys energy and not matter. For example, sound wave is a type of wave that carries sound energy from one place to another via mediums such as water, air etc.

Hence, according to this question, a wave can be described as a disturbance that travels through a medium with a transfer of energy and WITHOUT A TRANSFER OF MATTER.

Answer:

The correct option is D.

Explanation:

The energy is the capacity to do work.

There are several types of energies.

1. kinetic energy : it is due to the motion of the body.

2. Potential energy : It is due to the position or the configuration of the body.

3. Mechanical energy: The sum of the kinetic energy and the potential energy is called mechanical energy.

The energy is a scalar quantity.

According to the law of conservation of energy, the energy can not be created and cannot be destroyed, it can transformed from one form to another.

When we get the mechanical energy negative, it means the energy was destroyed in some other forms of energy.  

Answer:

A

Explanation:

this because

gravitational potential energy = mass x height x gravitational field strength

so let's assume mass is 2 kg and gravitational field strength is 10 N /kg

so when height is very low, take it as 3 m

gravitational potential energy= 2 x 3 x 10 = 60 j

but when height is 6m

gravitational potential energy = 2 x 6 x 10 = 120 j

so when the height is the greatest, the gravitational potential energy is the highest

so A is the heighest so it has the highest gravitational potential energy.

hope this helps

please mark it brainliest :D

His question is incomplete, the complete question is;

A film oil on water will appear dark when it is very thin, because the path length difference becomes small compared with the wavelength of light and there is a phase shift at the top surface.

If the oil film becomes dark when the path length difference is less than one fourth the wavelength, what is the thickest the oil film can be and appear dark at all visible wavelengths. Oil has an index of fraction of 1.40.

In this question, assume the wavelength visible light is in the range of 400 nm to 700 nm.

Answer:

the minimum thickness of the oil for destructive interference to occur is approximately 35.714 nm

Explanation:

Given the data in the question;

Path difference for destructive interference between the two reflected waves ( top and bottom );

δ = 2nt ---------- let this be equation 1

Also, for one path difference of reflected waves, one fourth of the wavelength of reflected waves;

δ = λ/4 ---------- let this be equation 2

from equation 1 and 2;

δ = δ

2nt =  λ/4

we find t;

8nt =  λ

t = λ / 8n

given that; λ[tex]_{minimum[/tex] = 400 nm and n = 1.40

we substitute

t = 400nm / 8(1.40)

t = 400nm / 11.2

t = 35.7142857 ≈ 35.714 nm

Therefore, the minimum thickness of the oil for destructive interference to occur is approximately 35.714 nm

Answer:

See Explanation

Explanation:

According to Newton's second law of motion, the acceleration of a body is proportional to the net external force that acts on the body.

A body accelerated when it is acted upon by an unbalanced net external force.

When the external forces acting on a body are balanced, the effect of each force is cancelled by the other hence the body is not accelerated according to Newton's second law.