a 50.0-kg skater is traveling due east at a speed of 3.00 m/s. a 70.0-kg skater is moving due south at a speed of 7.00 m/s. they collide and hold on to each other after the collision, managing to move off at an angle θ south of east, with a speed of vf. find (a)the angle θ and (b)the speed vf, assuming that friction can be ignored.

Answers

Answer 1

a 50.0-kg skater is traveling due east at a speed of 3.00 m/s. a 70.0-kg skater is moving due south at a speed of 7.00 m/s. they collide and hold on to each other after the collision, managing to move off at an angle θ south of east, with a speed of vf. find

(a)the angle θ and

(b)the speed vf, assuming that friction can be ignored.   4.28 m/s

I used tan theta=(opposite/adjacent) but I got 66.8 degrees as my answer with 7 as the opposite and 3 as the adjacent, whereas my answer booklet says 73.0 degrees. I thought velocities could be treated as vectors.

someone who skates. same as skateboarderSee skateboarder. British informal a young man or woman who usually wears saggy garments and spends lots of time skateboarding.

travel is the motion of human beings among distant geographical places. journey can be performed by using foot, bicycle, vehicle, educate, boat, bus, airplane, ship or other approach, with or without baggage, and can be one way or spherical ride.

Learn more collision here:-

https://brainly.com/question/4403635

#SPJ4


Related Questions

The internal energy within a system associated with the motion of particles and that can be added to a substance is called _____. (1 point).

Answers

Answer: The internal energy within a system associated with the motion of particles and that can be added to a substance is called kinetic energy.

Reason:

Internal energy U of a system or a body with well-defined boundaries is the total of the kinetic energy due to the motion of molecules and the potential energy associated with the vibrational motion and electric energy of atoms within molecules.

find more: https://brainly.com/question/26472013?referrer=searchResults

#SPJ4

if it takes a bike wheel 6 seconds to complete one revolution, what is the wheel's angular velocity? answer: degree/s.

Answers

The angular velocity of the wheel when the bike takes 6 s to complete one revolution is 0.33π

Time taken by the wheel = t = 6 s

Angle of the wheel = θ

= θ = 2π

Angular Velocity = ω =

= ω = angle / time taken

= ω = θ / t

= ω = 2π / 6

= ω = π/3

= ω = 0.33π

Angular velocity is how fast the rigid body rotates with respect to its centre of rotation and is independent to the choice of origin. It is the displacement of the object revolving with respect to the time taken by the object.

To know more about Angular Velocity :

https://brainly.com/question/16272235

#SPJ4

i have no clue on what to do

Answers

Answer:

Explanation:

what are the multiple answers -.-?

if an astronaut knocks a wrench off the outside of the space shuttle (while in space) while she is doing a repair job, the wrench will continue moving in the same direction. which of newton's laws of motion will the wrench demonstrate?

Answers

The Newton's first law is demonstrated over here.

If the wrench is thrown then that wrench will keep on moving in the space.

As we all no space has no gravity and since there is no gravity, hence, no force is applied on that body.

The wrench will move freely in the space and will continue to move in same direction until there is some external force is applied to stop or change its direction.

This shows that over here the Newton's first law is applied.

The Newton's first law states that the body will continue to be in the same state or motion and will not change until the external force is applied on it.

This Newton's first law is also known as law of inertia.

Therefore, the wrench will continue to move in the same direction under the influence of Newton's first law.

To know more about Newton's first law, refer: https://brainly.com/question/974124

#SPJ4

A 1270 kg sedan has the same amount of momentum as a 3600 kg truck moving with a speed of 14 m/s what is the speed of the sedan

Answers

The speed of sedan is 39.68m/s.

What is momentum?

By dividing a particle's mass by its speed, momentum is produced. Momentum is a vector quantity because it has both a direction and a magnitude. Isaac Newton's second law of motion states that the time rate of change of momentum is equal to the force acting on the particle. the laws of motion established by Newton.

Momentum = mass × velocity

Momentum of the truck = 3600 × 14

Momentum of the truck = momentum of sedan

3600 × 14 = 1270 × speed

Speed of sedan = 3600 × 14/1270

Speed of sedan = 39.68m/s.

To know more about momentum visit:

https://brainly.com/question/24030570

#SPJ1

PLEASE HELP WILL MARK BRAINLIEST IF YOU EXPLAIN HWK YOU GOT THE ANSWER!!!!

Answers

Answer:

A A A A. a. a a a a a a a

Explanation:

a is the answer

Two identical blocks are pushed up frictionless inclines as shown. Consider the portion of the motion of block 1 during which it moves a distance L1, and the portion of the motion of block 2 during which it moves a distance L2. Each block is displaced the same vertical distance Z.The hand pushes parallel to the incline with same magnitude of force FBH in both cases. Block 2 moves at a decreasing speed. Is the absolute value of the work done by the gravitational force on block 2 greater than, less than, or equal to the work done by the gravitational force on block 1? Explain.

Answers

The answers to these questions are:

The absolute value of the work done by hand on block 1 is less than the absolute value of the work done by the hand on block 2.  The force by hand is the same on both blocks but the distance traveled by the block 1 along the incline (L2) is greater than the distance traveled by the block 1 ( L1).The absolute value of the work done by the gravitational force on block 1 is equal to the absolute value of the work done by the gravitational force on block 2. Both blocks travel the same height Z.The speed of block 2 increases. The net work done on block 2 is not zero as in the case of block 1. Hence the speed of the block increases.

Therefore, Two identical blocks are pushed up frictionless .

To know more about friction, visit:

https://brainly.com/question/24338873

#SPJ4

an outside loudspeaker (considered a small source) emits sound waves with a power output of 102 w. (a) find the intensity 12.4 m from the source.

Answers

The calculated value is 5.6 m. Much more frequently than sound intensities in watts per square meter, sound intensity levels are expressed in decibels (dB).

Both the scientific literature and the public media use decibels as their preferred measurement unit. The rationale behind this decision of units has to do with how we hear. Noise exposure is harmful to the hearing, and it is normal for musicians to suffer from hearing loss that is so severe that it affects their ability to play. Sound intensity, a term that applies to all noises, whether or not they are heard, is the pertinent physical quantity.

We are given Δp, so we can calculate I using the equation I=(Δp)22ρv . Using I , we can calculate β straight from its definition in β (dB)=10 log10(II0) β (dB)=10 log10(II0) .

Learn more about intensity here-

https://brainly.com/question/17583145

#SPJ4

a bicycle wheel with radius 0.3 m rotates from rest to 3.1 rev/s in 5.7 s. what is the magnitude (in m/s2) of the total acceleration vector at the edge of the wheel at 1.2 s?

Answers

The magnitude of the total acceleration vector at the edge of the wheel at 1.2 s is 5.22 m/s².

Given that,

Radius of the wheel = 0.3 m

Initial angular velocity ω₀ = 0

It rotates 3.1 rev/s in 5.7s. Therefore, ω = 2*π*r = 2*π* 3.1 = 19.47 rad/s

We know that, ω = ω₀ + αt

where, α = angular acceleration

ω = Final angular velocity

t = time

α = 19.47/5.7 = 3.42 rad/s²

Total acceleration at any point will be a vector sum of tangential acceleration and centripetal acceleration

ω = ω₀ + αt

ω = 0 + 3.42* 1.2 = 4.11 rad/s

αc = ω² * r = 4.11² * 0.3 = 5.07 m/s²

Tangential acceleration αt = α * r

αt = 4.11 * 0.3 = 1.23 m/s²

α net = √(5.07² + 1.23²) = √(25.7049 + 1.5129) = 5.22 m/s²

Thus, the magnitude of total acceleration vector at the edge of the wheel is 5.22 m/s².

To know more about acceleration:

https://brainly.com/question/14369333

#SPJ4

now the switch for coil 1 has been closed for a long time. which direction is the induced current in coil 2 through the current meter while the switch for coil 1 stays closed?.

Answers

This causes a force to be exerted on the electrons in coil 2, resulting in induced current flowing in the opposite direction.

What is force?
A force is indeed an influence that can alter an object's motion according to physics. A force may cause an object to mass to accelerate when it changes its velocity, such as when it moves away from rest. An intuitive way to describe force is as a push or even a pull. A force is a vector quantity because it has both direction and magnitude. It is calculated using the newton SI unit (N). Force is denoted by the letter F. (formerly P). The net force acting on an object seems to be equal to the speed that its momentum changes over time, according to Newton's second law in its original formulation.

The induced current in coil 2 will be in the opposite direction as the current in coil 1. This is because when the switch for coil 1 is closed, current will start flowing through coil 1. This will create a magnetic field around coil 1, which intersects with the magnetic field around coil 2. This causes a force to be exerted on the electrons in coil 2, resulting in induced current flowing in the opposite direction.

To learn more about force
https://brainly.com/question/12785175
#SPJ4

a generator is connected to a resistor and a 0.027-h inductor in series. the rms voltage across the generator is 9.2 v. when the generator frequency is set to 180 hz, the rms voltage across the inductor is 3.2 v. determine the resistance of the resistor in this circuit.

Answers

The resistance of the resistor in this circuit is 82.31 Ohms

How to solve for the resistance

We would first have to solve for the angular frequency

ω = 2π* f

f = 180 hz

= 2* 3.14 * 180

= 1130.4

Next we would have to solve for the  Inductive reactance XL = ω* L

= 1130.4 * 0.027

= 30.52

The current is

3.2 v / 30.52

= 0.1048

Impedance Z = V/ I

9.2 v / 0.1048

= 87.79

To get the resistance we would have to use

Z² = (R² + XL²)

87.79² = R² + 30.52²

R²  = 87.79² - 30.52²

= 7707.08 - 931.47

= 6775.6

R = √6775.6

= 82.31 ohms

Read more on resistor here : https://brainly.com/question/24858512

#SPJ1

a single conducting loop has a radius equal to and carries a current equal to what is the magnitude of the magnetic field on the line through the center of the loop and perpendicular to the plane of the loop

Answers

On a current loop, a uniform magnetic field has a net torque but no net force. Let's assume that the magnetic field is parallel to both sides of the loop's two sides and is in its plane. The force on the left and right sides of the loop, if it has width a, height b, and current I, is given by F = IbB. Due to the field's parallel alignment with those other sides, they are not subject to any force.

No net force exists because the two forces are acting in opposite directions, but there is a torque that tends to cause the loop to rotate about an axis that passes through its center. This axis's torque is given by:

τ = F (a/2) + F (a/2) = Fa = IabB.

The area vector is perpendicular to the plane of the loop, so = IAB. Another right-hand rule can be used to determine its direction: curl your right hand's fingers in the direction of the current, and point your thumb outward so that it faces the direction of the area vector.

To know more about magnetic field visit:-

https://brainly.com/question/14848188

#SPJ4

if a river has an average width of 15 m, an average depth of 5 m, and is flowing with a velocity of 2 m/s, what is its discharge?

Answers

According to the given statement a river has an average  3 * 10⁵ W  is its discharge.

What is velocity definition with example?

The scalar metric of speed and direction of motion is known as velocity. The speed that an object goes in one side is known as its velocity. Speed may be used to calculate both the vehicle speed traveling north just on main freeway and the velocity of a explosion bursting in space.

Briefing:

Water's speed is 2 m/s.

Flow area = 5m x 15m = 75m²

Water has a density of 1000 kg/m³

The volume of water flowing per second in the continuity equation is written as v=Av.

Hence, mass of water m=vρ=Avρ

K.E. = 1/2 mv² = 1/2 Avρ²

K.E.  = 1/2 Avρ³

ρ =  1/2 Avρ³

ρ  = 1/2 * 75 * (2)³ * 1000

ρ = 3 * 10⁵ W

To know more about Velocity visit:

https://brainly.com/question/28738284

#SPJ4


a parallel-plate air capacitor of capacitance 245 pf has a charge of magnitude 0.148/lc on each plate. the plates are 0.328 mm apart. (a) what is the potential difference between the plates? (

Answers

The potential difference between the plates of a parallel-plate air capacitor of capacitance 245 pf has a charge of magnitude 0.148 μC on each plate is 604 V

Q = C V

Q = Charge

C = Capacitance

V = Potential difference

Q = 0.148 μ C

Q = 0.148 * 10⁻⁶ C

C = 245 pF

C = 245 * 10⁻¹² F

V = Q / C

V = ( 0.148 * 10⁻⁶ ) / ( 245 * 10⁻¹² )

V = 604 V

Voltage, also known as electric pressure, electric tension, or potential difference, is the difference in electric potential between two points. In a static electric field, it corresponds to the work needed per unit of charge to move a test charge between the two points.

Therefore, the potential difference is 604 V

To know more about potential difference

https://brainly.com/question/12198573

#SPJ4

A 10.0 kg block is released from rest down a 30° ramp.
It slides 6.0m along the ramp against a frictional force
of 16N. What is its speed after sliding 6.0m along the ramp?
*SOLVE USING ENERGY

Answers

Answer:

6.298 m/s

Explanation:

[tex]F_{net} =ma[/tex]

[tex]F_F=u_k*F_N[/tex]  friction force equation

[tex]ma=mgsin(x)-umgcos(x)[/tex]

We are given

[tex]m=10\\g=9.81\\F_F=16\\V_i=0[/tex]

[tex]umgcos(x)=F_F[/tex]

[tex]u*10*9.81*cos(x)=16[/tex]

[tex]u=0.18833036[/tex]

[tex]ma=mgsin(x)-umgcos(x)[/tex]

[tex]10*a=10*9.81*sin(30)-0.18833036*10*9.81*cos(30)[/tex]

[tex]a=3.305[/tex]

[tex]V_{f} ^{2} =V_{i} ^{2}+2ax[/tex]

[tex]V_{f} ^{2} =0 ^{2}+2*3.305*6[/tex]

[tex]V_f=6.298[/tex]

when a submarine dives to a depth of 120 m, to how large a total pressure is its exterior surface subjected? the density of seawater is about 1.03 g/cm3.

Answers

Data provided in the question:

Initial depth of the submarine, d = 120 m

Density of water, ρ = 1.03 kg/m³

Now,

Pressure due to water = ρgh

here,

g is the acceleration due to gravity = 10 m/s²

h = height of water above

So,

Increase in pressure = ρgD - ρgd

= ρg(D - d)

= 1.03 × 10 × (120)

= 1236 Pa

Therefore, the total pressure of the submarine is 1236 Pa.

To know more about pressure, refer: https://brainly.com/question/14640642

#SPJ4

A 2.00-kg rock has a horizontal velocity of magnitude 12.0 m/s when it is at point P in the figure (Figure 1). (a) At this instant, what are the magnitude and direction of its angular momentum relative to point O? (b) If the only force acting on the rock is its weight, what is the rate of change (magnitude and direction) of its angular momentum at this instant?

Answers

The rate of change (magnitude and direction) of its angular momentum at this instant is  115 kg m/s².

The rate of change of angular momentum is equal to the net torque acting on the rock. The only force acting on the rock is the weight of the rock that is, mg.

As torque is equal to the product of the tangential component of force (

and distance (r) from the axis of rotation to the line of force, the net torque acting on the rock is,

Here, r is the distance from point O to the line of force.

This torque is equal to the rate of change of angular momentum of the rock.

Calculation:-

torque = mgcosθ

          τ = mgrcosθ

             = 115 kg m/s²

The magnitude of angular momentum is 115 kg m/s².

Learn more about angular momentum here:-https://brainly.com/question/4126751

#SPJ4

Carefully examine a bulb. Two wires extend from the filament of the bulb into the base. You probably cannot see into the base, however, you should be able to make a good guess as to where the wires are attached. Describe where the wires attach. Explain based on your observations in parts A-C. On the basis of the observations that we have made, we will make the following assumptions: 1. A flow exists in a complete circuit from one terminal of the battery, through the rest of the circuit, back to the other terminal of the battery, through the battery and back around the circuit. We will call this flow electric current. 2. For identical bulbs, bulb brightness can be used as an indicator of the amount of current through that bulb: the brighter the bulb, the greater the current. C. We may think of a bulb as presenting an obstacle, or resistance, to the current in the circuit. 1. Thinking of the bulb in this way, would adding more bulbs in series cause the total obstacle to the flow, or total resistance, to increase, decrease, or stay the same as before? 2. Formulate a rule for predicting how the current through the battery would change (i.e., whether it would increase, decrease, or remain the same) if the number of bulbs connected in series were increased or decreased.

Answers

1)Now as we increase more bulb in series n increase to (n+1),so the total resistance of the circuit increases.

2)Current increases if number of bulb in series decreases.

Equivalent of the circutes

R=∑P=nn

so resistence increases

i=V/R=V/nn

current i'=V/n'R

i'/i=n/n'

since n'>n

i'<i

so current increases

Resistance is the degree to which a substance obstructs or opposes an electric current. Electron flow is referred to as electric current. To better understand resistance, imagine how difficult it would be for a person to move from one shop to another in a crowded market. The opposition a substance provides to the flow of electrical current is referred to as resistance. The capital letter R is used to symbolize it. The ohm, sometimes written as a word and sometimes represented by the uppercase Greek letter omega, is the commonly used unit of resistance.

Learn more about Resistance here:

https://brainly.com/question/29427458

#SPJ4

As you watch the video, notice that the size of the tidal bulges varies with the Moon's phase, which depends on its orbital position relative to the Sun. Which of the following statements accurately describes this variation?
Low tides are lowest at both full moon and new moon.
Low tides are highest at both full moon and new moon.
High tides are highest at full moon and lowest at new moon.
Low tides are highest at full moon and lowest at new moon.
High tides are highest at both full moon and new moon.
High tides are highest at first- and third-quarter moon.

Answers

The size of the tidal bulges increases as the Moon moves closer to the Earth in its orbit, when it is in the new moon or full moon phase, and decreases as it moves away from the Earth in its orbit, when it is in the first quarter or third quarter phase.

What is tidal bulges?
The fluid and moveable ocean water is drawn towards the moon by the gravitational influence between the moon as well as the Earth. The ocean closest to the moon experiences a "bulge" as a result, as the Earth rotates, the affected waters' locations shift. Imagine the moon as just a magnet drawing the water to it. The force of intertia, which tends to keep an object moving inside a straight line, opposes this motion of the water in the direction of the moon. Our oceans' motion is balanced by this, but since the gravitational pull seems to be stronger, the resulting force also creates our tides.

To learn more about tidal bulges
https://brainly.com/question/4168632
#SPJ4

an 8.0-newton wooden block slides across a horizontal wooden floor at constant velocity. what is the magnitude of the force of kinetic friction between the block and the floor?

Answers

Answer:

2.4 n

Explanation:

The force of kinetic friction between the block and the floor is given by:

where

is the coefficient of kinetic friction

N is the normal reaction of the floor against the block

For a horizontal surface (as in this case), the normal reaction is equal to the weight of the block, so . For wood-wood contact, the coefficient of kinetic friction is approximately . Therefore, the force of kinetic friction between the block and the

Two charged particles repel each other with a force f. If the charge on only one of the particles is doubled and the distance between them is also doubled, then the force will be.

Answers

With a force of f, two charged particles repel one another. The force will be F/2 if only one particle's charge is doubled and the distance in them is likewise doubled.

What does the word "force" mean in science?

A force of this magnitude can be described as a push or a pull, which is perfectly fine. A force does not "exist in" or "contain" an object. A force from another can exert pressure on something. The concept of a force makes no distinction across living creatures and inanimate objects.

what is In one words, define force.

The definition of force is an external cause that, when applied, modifies or tends to modifies the state of the body. The body comes to rest while it is in motion, and it will go into motion when it is at rest.

To know more about force visit:

https://brainly.com/question/26115859

#SPJ4

The materials that made up the solar nebulacan be categorized into the four general types as follows. Rank these meals from left to right based on the dance in the solare forest to lowest ► View Available Hints Reet Help metals rock hydrogen compounds hydrogen and hellum gas Lowest abundance Highest abundance

Answers

The  materials arranged in order lowest to highest abundance are as follows

Metals> Rocks> Hydrogen compounds >Hydrogen and Helium

The solar nebula begins as a thin gas of hydrogen and helium that is covered in little dust specks. The planets' building blocks are these little grains. Any gas cloud's development depends significantly on the movement of dust particles. These grains serve as the condensation nuclei on which matter accretes.

The solar nebula is composed of 98% light gases, including hydrogen and helium, which were created during the Big Bang. Next, 1.4% of hydrogen compounds, such as water, methane, and ammonia, were found. Finally, 0.4% of rocks, such as silicates, and 0.2% of metals, such as iron, nickel, and aluminum, were found.Due to the intense heat, only metals and rocks could condense in the nebula's interior, while hydrogen compounds, despite being more prevalent, could only do so in the cooler outer regions.

Click here to learn more about the solar nebula.

https://brainly.com/question/28715616

#SPJ4

What are the total force and aboute preure on the bottom of a wimming pool 22m by 8. 5cm whoe uniform depth i 2m? what will be the preure againt the ide of the pool near the bottom?

Answers

19600N[tex]m^{2}[/tex] is the total pressure near the bottom of the pool as per the given data in the statement.

What is pressure?

Pressure:  The perpendicular force applied to surface of any object tending to be distributed per unit area is known as pressure.

According to the given data :

length of the pool = 22m

breadth of the pool =8.5 cm=0.085 m

depth =2 m

To find the pressure near the bottom of the pool we use the following formula

P=hpg, where h=height or depth, p= density of liquid and g= 9.8m/s

P=2*1000*9.8

P=19600N[tex]m^{2}[/tex]

Hence, 19600N[tex]m^{2}[/tex] is the total pressure near the bottom of the pool as per the given data in the statement.

To know more about the pressure visit.

https://brainly.com/question/14082296

#SPJ4

19600N[tex]m^{2}[/tex] is the total pressure near the bottom of the pool as per the given data in the statement.

What is pressure?

Pressure:  The perpendicular force applied to surface of any object tending to be distributed per unit area is known as pressure.

According to the given data :

length of the pool = 22m

breadth of the pool =8.5 cm=0.085 m

depth =2 m

To find the pressure near the bottom of the pool we use the following formula

P=hpg, where h=height or depth, p= density of liquid and g= 9.8m/s

P=2*1000*9.8

P=19600N[tex]m^{2}[/tex]

Hence, 19600N[tex]m^{2}[/tex] is the total pressure near the bottom of the pool as per the given data in the statement.

To know more about the pressure visit.

https://brainly.com/question/14082296

#SPJ4

A capacitor is charged and then made to discharge through a resistance. The time constant is Ï„. In what time will the potential difference across the capacitor decrease by 10%?
a. t ln 0.1
b. t in 0.9
c. t ln 10/9
d. t in 11/10

Answers

Answer:

Q = Q0 e^-t/RC = Q0 e^-t/T

Charge left on capacitor after time t where T is the time constant of the capacitor - R * C

Q / Q0 = .9          charge decreases by 10%

.9 = e^-t/T

ln .9 = -t / T = .10

Or t = -T * ln .9

When elapsed time t = -ln .9 * time constant

a 10 kg mass slides from an initial velocity of 20 m/s to rest over 30 m. what is the force of friction?

Answers

Force of friction is 0.167

What is friction?

The force preventing sliding against one another of solid surfaces, fluid layers, and material components is known as friction.

What is importance of friction?

Things can move more slowly and become immobile when there is friction. In a world without friction, more things would slide around, it would be challenging to keep shoes and clothing on, and it would be extremely challenging for people or cars to move or turn.

According to the given information :

Mass=10 kg

Initial velocity(u)=20m/s

F=−μN

ma=−μmg

a=−μg

Distance travelled force coming to rest=30m

v²−u²=2as

0²−u²=2as

−u²=−2μgs

μ=(10)²/2×10×30=1/6=0.167

μ=0.167

To learn more about friction:

https://brainly.com/question/28356847

#SPJ4

7. An engineer is investigating potential energy with two identical magnetic roller coaster cars on different sides of a center magnet that cannot move. To test her ideas, the engineer will move one car one space. Which movement will result in the largest increase in potential energy?.

Answers

The same change in potential energy will be produced by each of these actions because they all move a roller coaster car by the same amount of space.

What is potential energy, exactly?

Due to its position, an object has the ability to store energy. The bow has no energy stored when it assumes its normal position. The bow can yet store energy when its position is changed from its normal equilibrium position because of its position. Potential energy is the energy of position that a thing has stored inside it.

Because the train is moving against the magnetic pull, the potential energy is increased. However, because the magnets in the system are unchanged, the potential energy is unaffected. Engineer is testing two identical magnetic roller coaster vehicles on either side of a stationary center magnet.

To learn more about potential energy use link below:

https://brainly.com/question/14427111

#SPJ4

a boat is traveling at 54 knots in a direction of 48°. it encounters wind moving at 14 knots in a direction of 20°. what is the true velocity and direction of the boat? round to the nearest whole number.

Answers

The true velocity and direction of the boat is 67knots, 42degree.

Velocity is the directional pace of an item in motion as an indication of its rate of exchange in the role as determined from a selected frame of reference and as measured by way of a selected standard of time.

Average velocity is calculated by means of dividing your displacement (a vector pointing out of your initial role in your final position) through the entire time; the average pace is calculated by way of dividing the overall distance you traveled by means of the total time.

Calculation:- 

velocity of boat = 54 knots

direction =  48°

wind speed = 14 knots

direction =  20°.

The true velocity and direction of the boat is 67knots, 42degree

Learn more velocity here:-

https://brainly.com/question/1844960

#SPJ4

Answer:

67 knots; 42°

Explanation:

I took  the test and got it right:)

Sound 1 has an intensity of 40.0 W/m^2 . Sound 2 has an intensity level that is 2.0 dB greater than the intensity level of sound 1.
What is the intensity of sound 2?
l2= ? W/m^2

Answers

The intensity level of sound 2 is 63.386 W/m².

Intensity of sound 1 = 40.0 W/m²

Intensity of sound 2 = 2.0 dB

We know that I₁ = 10⁻¹² W/m²

Intensity level of sound 2 =

= Using the equation of the sound level intensity

= Iₓ = 10log (I/I₁)

= Iₓ = 10 log(40/ 10⁻¹²)

= Iₓ = 136.02 dB

Given that intensity of sound 2 is greater than sound 1 by 2.0 dB

Thus,

= Iₙ = 136.02 + 2.0

=  Iₙ = 138.02 dB

To calculate intensity of sound 2 =

= I₂ = 10log(Iₙ / 10⁻¹²)

= I₂ = 63.386 W/m²

To know more about Intensity of Sound:

https://brainly.com/question/12899113

#SPJ4

what is the difference between the pressure on the bottom of a pool and the pressure on the water surface?

Answers

Due to the weight of the water on the body that is submerged, the pressure is higher at the bottom and lower at the surface.

How does pressure change with ocean depth?Our bodies experience a 14.7 pound per square inch air pressure while we are at sea level. Since your body's internal fluids are also pushing outward with equal force, you cannot feel it.But if you go even a few feet under the surface of the water, something changes. The pressure in your ears is getting worse. The hydrostatic pressure, or the force a liquid exerts on an object per unit area, has increased, which is the cause of this. The pressure of the water pressing down on you increases the deeper you go under the water. As you descend, the pressure rises by one atmosphere for every 33 feet (10.06 meters).Numerous sea creatures can withstand high pressure with no problems at all. Because of their more flexible bodies, whales, for example, can withstand extreme pressure changes. The loose, bendable cartilage that holds their ribs together prevents their rib cage from collapsing at pressures that would easily snap our bones.In order to prevent rupturing, a whale's lungs can also safely collapse under pressure. As a result, sperm whales can now go in search of giant squid at depths of up to 7,000 feet.

To Learn more About pressure refer to:

https://brainly.com/question/28012687

#SPJ4

the 5.2 kg mass and spring are moved to a frictionless 30 degree incline, and positioned so that he psring is parlelle to the incline. determine the spring's new dpslacement at equilibrium

Answers

The displacement would be approximately 2.83 meters.

What is displacement?
A displacement is indeed a vector in geometry as well as mechanics that has a length equal to the shortest distance between a point P's initial and final positions. It measures the length and angle of the net motion, or total motion, in a straight line from the starting point to the destination of the juncture trajectory. The translation that links the starting point and the ending point can be used to spot a displacement. The finishing position xf of the a point relative towards its initial position xi, or a physical location (resulting from of the motion), is another way to describe a displacement. The difference between both the final and initial positions can be used to define the corresponding displacement vector:

The spring's new displacement at equilibrium depends on the angle of the incline. Since the incline is 30 degrees, the displacement of the spring at equilibrium can be found by using the following equation:

Displacement = (mass * gravity * sin(incline angle)) / spring constant

In this case, the displacement would be (5.2 kg * 9.8 m/s2 * sin(30))/ spring constant. Plugging in the values we know, the displacement would be approximately 2.83 meters.

To learn more about displacement
https://brainly.com/question/14422259
#SPJ4

Other Questions
Determine the degree measure of one angle of a 36-sided regular polygon. 170 180 6,120 6,480 Creating compelling visuals for presentations requires people to learn what new tools?. What kind of support do latina mothers get from the community? A woman is laying on the floor in a disheveled room ohn sells 300 packs of candies per week at $40 per pack. the candies are ordered from a supplier who charges john $60 per order and $20 per pack. john's annual holding cost percentage is 0.2. assume john operates 50 weeks a year. what is the economic order quantity that minimizes the total ordering and holding cost per year? Cosmetic manufacturers that sell shampoo and conditioner together as one package at a lower price rather than selling each item separately are usingA. price lining.B. slotting allowances.C. cumulative quantity discounts.D. loss leaders.E. price bundling. What does the equation look like after you combine like terms?3x + 2 4x = 167x+2=16x+2=16x+2=167x+2=16 scores from the sit and reach test weren't normally distributed. what is the likely cause for this lack of normal distribution? a bin contains 4 items: 1 a, 1 b, 2 c and 6 d. a person randomly selects 3. how many different types of items will be selected explain how the is related to the standard error of the estimated difference in average birth weight for smoking and nonsmoking mothers. the most important information in a press release should be . a. focused totally on selling the writer's company and its products b. highlighted briefly in the middle paragraphs c. presented early d. saved for the last paragraph for dramatic effect Consider the following data of mathematics students.60 study French, 30 study French and German55 study German, 25 study French and Russian75 study Russian, 35 study German and Russian12 students study all the three languages.Let F, G, R denote the set of students studying French, German and Russian respectively. Then find the number of students studying at least one of the three languages i.e, n(FUGUR) If you are running at 6m/s and decide at 2m/s. How long will take you to stop and how far will You go respectively while declaration Write a paragraph that includes alist, the name of a city and state, and a compound sentnece. back to assignment attempts keep the highest no score out of 2/ 2 10. missing data which of the following are valid reasons for why there may be missing data in a well-designed study? check all that apply. some respondents didnt know the answer to the question. some respondents refused to answer the question. data for some respondents were lost or misrecorded. researchers always have access to all values of all variables in the data set of a well-designed study. why might eliminating respondents with missing data compromise the results of a study? a random sample may no longer be random if you eliminate some members of the sample. statistical software is not equipped to handle eliminating responses. continue without saving abnormal outcome variation can be attributed to which type of variation in input or environmental variables? in the context of the strategies used by people to manage dialectic tensions in relational life as identified by baxter, is a form of integration that manages the tensions by exempting certain issues from the general pattern. During the meeting, kristof asked, "where is the product typically bought by customers in the international market segments?" what element of the marketing mix is he addressing?. Which of the following studies is linked most directly to the establishment of the National Research Act in 1974 and ultimately to the Belmont Report and Federal regulations for human subject protectionThe Public Health Service Tuskegee Study of Untreated Syphilis in the Negro Male If, as a result of inappropriate use of the strategic management process, performance data and activity reports indicate undesirable performance, then operational managers must: *know about it so that they can correct the employee activity.change the strategic management model.immediately notify the board of directors.allow sufficient time to pass to verify if it is the process or just the usage that is the problem.check the performance data to ensure their accuracy and take two more measurements.