a 47.2-ml sample of naoh is titrated with 0.624 m hbr. 27.4 ml of the acid are required to reach the equivalence point. what is the molarity of the base?

The final concentration of this solution is 0.86M.

A 69 ml portion of a 1.70M solution is diluted with water till a total volume of 228 ml.

We know,

Moles = Molarity x volume

So, moles of 69ml solution.

Moles = 69 x 1.70

Concentration after dilution = 69 x 1.79/228

Concentration after dilution = 0.5417M

Now, 114ml portion of this solution is diluted by adding 121 ml of water.

So, the final concentration will be,

Concentration = 114 x 1.79/235

Final Concentration = 0.86M.

So, the final concentration is 0.86M.

To know more about concentration, visit,

https://brainly.com/question/24595796

#SPJ4

Answer:

C

Explanation:

Hydrogen peroxide is H2O2 which decomposes to water and oxygen

so

2H2O2 => 2H2O + O2

In 1803 Dalton discovered that oxygen combined with either one or two volumes of nitric oxide in closed vessels over water and this pioneering observation of integral multiple proportions provided important experimental evidence for his incipient atomic ideas.

In closed vessels over water, Dalton observed in 1803 that oxygen interacted with either one or two volumes of nitric oxide. This ground-breaking observation of integral multiple proportions offered crucial experimental support for his developing atomic theories.

Learn more about the oxygen,

https://brainly.com/question/26641294

#SPJ4,

The addition of 0.1 M HCl lowers the pH of the solution. The pH starts to decline gradually at first.

Sodium acetate is 0.1M and acetic acid is 0.2M. So, 4.7 and log (0.1/0.2) added together give the pH value. i.e., 4.39. A solution with 0.2M acetic acid and 0.1M sodium acetate, therefore, has a pH of 4.39. Because H+ aq is smaller in size and more mobile than Na+ aq, it will have a greater m in 0.1 M HCl.

Learn more about the Sodium acetate,

https://brainly.com/question/5261212

#SPJ4,

when 70.0 g of li3n(s) reacts with excess h2(g), 8.0 g of linh2 (s) is produced. The percent yield is closest to 17%

How to calculate the percentage yield

The reaction between  Li3N(s) and LiH(s) is given as:

Li3N+3H2 = 3LiH + NH3

Calculate the moles of Li3N

Moles = Mass/Molar mass

Moles = 70/35

Moles = 2 moles

From the reaction you can see that 1 mole of Li3N produce 3 moles of LiH, hence the moles of LiH is 6 moles

Determine the mass of LiH (theoretical yield)

Mass of LiH = 6 * 7.95

Mass of LiH = 47.7g

%yield = actual/theoretical * 100

%yield = 8/47.7 * 100

%yiels = 16.77%

Hence the percent yield is closest to 17%

Learn more on percent yield here:

https://brainly.com/question/12704041

#SPJ4

The neurotransmitter activated during the emergency situation is option A: norepinephrine.

A neurotransmitter and a hormone, norepinephrine is also known as noradrenaline. Dopamine is converted into norepinephrine, a neurotransmitter. Nerve cells in the brainstem region and a region close to the spinal cord produce norepinephrine. Your adrenal glands release norepinephrine, a hormone, in response to stress. The fight-or-flight response is a response that alters several bodily functions. Thus, it perceives danger as mentioned in the question.

The sympathetic nervous system, which is a component of your body's immediate "fight-or-flight" response to danger, produces norepinephrine. The flight-or-flight reaction is also referred to as the acute stress response in medicine.

To know more about norepinephrine, refer to the following link:

https://brainly.com/question/13753173

#SPJ4

Volume of the original phosphoric acid solution is 375.133 ml.

What is phosphoric acid?
Phosphoric acid, also known as orthophosphoric acid, monophosphoric acid, or phosphoric(V) acid, is an inorganic solid with the chemical formula H3PO4 that contains phosphorus. It is frequently found as an 85% aqueous solution, that is a syrupy liquid that is colourless, odourless, and non-volatile. It is a significant industrial chemical that is used in numerous fertilisers. This substance is an acid. The phosphate ion PO 3 4 is produced when all three H+ ions are removed. Dihydrogen phosphate ion H2PO 4 and hydrogen phosphate ion HPO24 are produced, respectively, by removing one or two protons. Organophosphates are esters created by phosphoric acid.

Here, we have given two solution with their conc. and volume .
So, formula used to calculate volume is:
M1V1 = M2V2

let, M1 = molarity of phosphoric acid
V1 = volume of phosphoric acid used
M2 = molarity of NaOH
V2 = volume of NaOH used

Now,
7.48 X 10-2  X  V1 = 0.244 x 115
V1 = 0.244 x 115/ 7.48 X 10-2
V1 = 375.133 ml.
Hence, the volume of phosphoric acid is 375.133 ml.

learn more about phosphoric acid
https://brainly.com/question/14812997
#SPJ4

In quantum chemistry, Linear Combination of Atomic Orbitals or LCAO is a superposition or mixing of atomic orbitals and a technique used for calculating molecular orbitals.

By  Linear Combination of Atomic Orbitals , we can predict which atomic orbitals can mix to form a molecular orbital on the basis of orbital symmetry. We can also predict the number of molecular orbitals that can be produced from the interaction between two atomic orbitals.

By LCAO, the position of electrons can be determined. If can electron is found in an atomic orbital say "A" and also in atomic orbital say B". Then the superposition of the two atomic orbitals A and B will give the overall wave function. It is represented by ψ.

ψ± = N(A ±  B)

To know more about Linear Combination of Atomic Orbitals here

https://brainly.com/question/3522408

#SPJ4

When stable lead-206 is produced by the radioactive decay of uranium-238, it passes through a 14-step radioactive decay series. There are eight and six decays in this sequence.

Ionizing radiation is released as a result of radioactive decay. Ionizing radiation offers a health concern by destroying tissue and the DNA in genes because it can damage the atoms in living things.

The decay chain is the collection of decay products produced to achieve this equilibrium. For instance, after producing intermediates like Uranium-234, Thorium-230, Radium-226, and Radon-222, the decay chain starting with Uranium-238 ends in Lead-206. Known as the "decay series" as well.

The daughter nucleus, thorium 234, is created by the alpha emission of a uranium 238 nuclei. This thorium then changes into protactinium 234 and experiences beta-negative decay to yield uranium 234 as a byproduct.

Thus, When stable lead-206 is produced by the radioactive decay of uranium-238, it passes through a 14-step radioactive decay series.

To learn more about radioactive decay, follow the link;

https://brainly.com/question/1770619

#SPJ1

Atoms will combine with each in order to become more chemically stable  by sharing electron and Compounds are formed between two atoms that have chemical bond that links them together.

In order for molecules and crystals to form, atoms or ions must maintain a long-lasting attraction to one another. Ionic and covalent bonds are formed by the sharing of electrons, while ionic bonds are formed by the electrostatic attraction between two oppositely charged ions. There are "strong bonds" or "primary bonds" like covalent, ionic, and metallic bonds as well as "weak bonds" or "secondary bonds" like dipole-dipole interactions, the London dispersion force, and hydrogen bonding. The strength of chemical bonds varies greatly. By sharing or transferring electrons between the involved atoms, strong chemical bonds are created.

Since opposing electric charges attract, the positively charged protons inside a nucleus and the negatively charged electrons that surround it are drawn to one another. Placing an electron between them

Learn more about chemical bond here:

https://brainly.com/question/12907148

#SPJ4

Answer:

Step 2 only

Explanation:

1.176 g of CaCl2 is required to make 53 mL of a 0.020 M CaCl2 solution, and there are 0.0106 moles of chloride ions present in the solution.

What is chloride ion?
The anion (negative charges ion) called Cl is the chloride ion. It is created when a compound like hydrogen chloride dissolves in water or even other polar solvents, or when the halogen element chlorine gains an electron. Sodium chloride and other chloride salts are frequently very water soluble. It is a crucial electrolyte that is present in all bodily fluids and is in charge of maintaining the proper acid-base balance, transmitting nerve signals, and controlling the flow of fluid into and out of cells. Less frequently, this same word chloride could also be included in chemical compounds' "common" names. These compounds contain one or even more chlorine atoms bound together covalently.

To calculate the mass of CaCl2 required to make 53 mL of a 0.020 M CaCl2 solution, we need to use the equation:
Mass (g) = Volume (mL) x Molarity (M) x Molar Mass (g/mol)
Mass (g) = 53 mL x 0.020 M x 110.98 g/mol
Mass (g) = 1.176 g CaCl2

To calculate the number of moles of chloride ions in the solution, we need to use the equation:
Moles = Mass (g) x (1mol/Molar Mass (g/mol))
Moles = 1.176 g x (1mol/110.98 g/mol)
Moles = 0.0106 moles Cl- ions

Therefore, 1.176 g of CaCl2 is required to make 53 mL of a 0.020 M CaCl2 solution, and there are 0.0106 moles of chloride ions present in the solution.

To learn more about chloride ion
https://brainly.com/question/24477791
#SPJ4

Answer:

i need points

Explanation:

The action of lipase is much more manifest on triglyceride, and it is also much faster the higher the molecular weight of the fatty acid present.

To learn more about triglycerides refer to:

https://brainly.com/question/15737562

#SPJ4

User Data is generally used to perform common automated configuration tasks and even run scripts after the instance starts. When you launch an instance in Amazon EC2, you can pass two types of user data - shell scripts and cloud-init directives. You can also pass this data into the launch wizard as plain text or as a file.

In general, a configuration is the arrangement of the components that make up a whole, or the act of creating that arrangement. A configuration, or particular shape, is produced when objects are placed in any spatial arrangement. As an illustration, scientists refer to a configuration as the particular, bound arrangement of atoms that forms a molecule.

Text, observations, figures, photos, numbers, graphs, and symbols can all be used as forms of data. Individual prices, weights, addresses, ages, names, temperatures, dates, or distances, for instance, could be included in the data. Data is an unprocessed type of knowledge and has no meaning or use by itself.

Learn more about configuration here:

brainly.com/question/14871898

#SPJ4

The belief that scientists in The Daily Times article developed as a result of experimentation is he believes that if deafness is caused by a defective gene, gene therapy has the potential to cure many forms of hearing loss. The correct option is 1.

Gene therapy is a process in which the defective gene is repaired by scientific methods. Gene therapy is a form of genetic engineering. It is an attempt to cure diseases. It involves replacing a mutated gene.

Therefore, the correct option is 1. He believes that if deafness is caused by a defective gene, gene therapy has the potential to cure many forms of hearing loss.

To learn more about gene therapy, refer to the link:

https://brainly.com/question/13022890

#SPJ1

Precipitation, acid-base, and oxidation-reduction reactions are the three most common types of chemical reactions.

When dissolved substances react, one (or more) solid products are produced, which is known as Precipitation reaction. These kinds of reactions, which are also occasionally known as double displacement, double replacement, or metathesis reactions, frequently involve the exchange of ions between ionic compounds in aqueous solutions. These interactions, which occur frequently in nature, are what cause kidney stones in mammals and coral reefs to grow in ocean waters. They are extensively utilized in industry to produce a variety of common and specialized compounds. Many chemical analysis procedures, such as gravimetric methods for figuring out the composition of matter and spot tests used to identify metal ions, heavily rely on precipitation reactions as well. This is called Precipitation reaction.

To learn more about Precipitation reaction visit here;

https://brainly.com/question/24158764

#SPJ4

The transition state is only present when the reaction's potential energy is at its greatest. It is quite unstable for the species in the transition state.

The term is derived from the Latin word "transire," which meaning to cross. It frequently describes the action rather than the outcome. Thus, "transitioning" is the process of changing, of moving from one set of traits or circumstances to another.

An excellent transition sentence might contain a word or phrase like although, despite this/that, in comparison, or yet if you needed to convey a point that contradicted your prior assertion.

To know more about Transition visit:

https://brainly.com/question/18089035

#SPJ4

The statement give in question is false as 4 hydrogen nuclei are converted into one helim nucleus some gamma rays, only two atom come together for fusion reaction.

The core is the power generator in the Sun. The core radius is close to one-fourth of that of the star. Inside the core, pressures and temperatures are high enough to make fusion. In a nuclear fusion reaction, the nuclei of two atoms come together to make a new atom. In the core of a sun, two hydrogen atoms combine to form a helium atom. The proton-proton cycle is an essential reaction that occurs within the core of the Sun.

H + H → He + ENERGY
In the proton-proton chain reaction, hydrogen nuclei are converted to helium nuclei through many intermediates. This reaction generates high-energy photons (gamma rays). This energy can be calculated by the famous Einstein equation, E = mc2.

Learn more about fusion ; https://brainly.com/question/12701636?referrer=searchResults
#SPJ4

Thick liquid layer that interacts with an inert carrier gas or mobile phase and is chemically linked to the inside of a capillary column

What is a chromatographic example?

Chromatography Methods

Some forms of liquid chromatography include high-performance liquid chromatography (HPLC), size exclusion chromatography, and supercritical fluid chromatography. Ion-exchange, resin, and paper chromatography are a few other varieties of chromatography.

What is the chromatography's fundamental tenet?

Chromatography is one more method for separating and analyzing chemical mixtures. The method is based on the interaction of polarity between the sample and two additional components, the solid (or stationary) phase, and the mobile phase, which can be either a liquid or a gas.

To know more about chromatography visit:

https://brainly.com/question/26491567

#SPJ4

The cell potential of the Zn/Zn2+//Cu2+/Cu cell is +1.10 V.

What is cell potential?
Just two examples as to how chemical reactions generate power through the movement of electrons are the batteries throughout your remote control and the engine throughout your car. The voltage that exists between a battery's two half cells can be measured using the cell potential. We will describe how to do this and what elements make it possible for us to determine the voltage that is present inside an electrochemical cell. The potential difference between the two half cells inside an electrochemical cell is measured by the cell potential, or Ecell. The ability of electron density to move from one half cell to another is what determines the potential difference. Due to the fact that the chemical reaction is just a redox reaction, electrons can move between the electrodes.

The half reactions for the Zn/Zn2+//Cu2+/Cu cell are:
Oxidation: Zn → Zn2+ + 2e-
Reduction: Cu2+ + 2e- → Cu

The overall reaction is:
Zn + Cu2+ → Zn2+ + Cu

The cell potential can be calculated from the standard reduction potentials of the two half reactions:
Ecell = Ereduction - Eoxidation
Ecell = (Ereduction for Cu2+ + 2e- → Cu) - (Eoxidation for Zn → Zn2+ + 2e-)
Ecell = + 0.34 V - (-0.76 V)
Ecell = + 1.10 V
This means that the cell potential of the Zn/Zn2+//Cu2+/Cu cell is +1.10 V.

To learn more about cell potential
https://brainly.com/question/1313684
#SPJ4

For neutralization in a titration of 35.00 mL of 0.737 M H₂SO₄, 62.4 mL of a 0.827 M KOH solution is needed.

H₂SO₄ + 2 KOH ---> K₂SO₄+ 2 H₂O

from the concentration equation

m1 n1 v1 = m2 n2 v2  ( since m = molarity , n = factor and v = volume)

M1 = 0.737 M

n1 = 2

V1 = 35 mL

M2 = 0.827 M

n2 = 1

V2 = ??

0.737 m x 2 x 35 mL = 0.827 m x 1 x v2

v2 =62.4

Hence, 62.4 mL of a 0.827 M KOH solution is needed for neutralization.

To know more about Concentration.

https://brainly.com/question/10725862

#SPJ4

The balanced reaction for the combustion of hexanol is:

2C₆H₁₄(g)+19O₂(g)→12CO₂(g)+14H₂O(g) 2 C ₆ H 14 ( g ) + 19O₂ ( g ) → 12CO₂ ( g ) + 14 H₂O ( g )

What is balanced reaction?

An equation for a chemical reaction is said to be balanced if both the reactants and the products have the same total charge and the same number of atoms for each component of the reaction. In other words, the reaction has equal amounts of mass and charge on both sides.

For instance, think about the response: O2 (g) + 2Mg(s) = 2MgO (g) Two magnesium and two oxygen atoms are present on the reactant and product sides of this reaction. The chemical reaction is a balanced chemical equation because it follows the law of conservation of mass.

To  learn more about balanced reaction

Here: https://brainly.com/question/26694427

#SPJ4

The property that must be identified to consider whether a toxic compound will easily move through soil and enter the groundwater is: D. Soil sorption coefficient (Kd).

Soil sorption coefficient (Kd) is the measurement to predict the amount of chemical substance absorbed into the soil per amount of water. This measurement is also called Freundlich solid-water distribution coefficient. To calculate the Kd value, we could use the equation as follows:

Kd = concentration on the solids (mg/kg) / concentration in the pore water (mg/L)

“The question seems incomplete. The complete query is as follows:

When considering whether a toxic compound will easily move through soil and enter the groundwater—which of the following properties must be identified?

Learn more about toxic chemicals here https://brainly.com/question/29563367

#SPJ4

Through a series of enzymatic reactions, the two carbons that were formerly the acetyl group of acetyl CoA are released as carbon dioxide, one of the primary byproducts of cellular respiration, in the citric acid cycle.

All six carbon atoms from the original glucose molecule are eventually incorporated into carbon dioxide because the two acetyl carbon atoms will eventually be released on later turns of the cycle.

Learn more about carbon dioxide,

https://brainly.com/question/9630194

#SPJ4

In acquiring a chromatogram on your vitamin c samples, two parameters need to be set: the time window and the activity rate threshold.

Chromatography is the approach. A chromatogram is an output (made from that approach). The chromatograph is the device this is used to generate the chromatogram.

Chromatography may be used as an analytical tool, feeding its output into a detector that reads the contents of the mixture. it is able to additionally be used as a purification tool, isolating the components of an aggregate for use in different experiments or strategies.

In chemical evaluation, chromatography is a laboratory approach for the separation of a mixture into its additives. The combination is dissolved in a fluid solvent known as the mobile section, which incorporates it thru a machine on which a material called the stationary segment is fixed.

Learn more about chromatogram here:

https://brainly.com/question/28731153

#SPJ4

when gas molecules collide (for example molecules of o2 or n2 in the air),  they don't  stick together due to their high thermal energy.

Because gas molecules are so small, the kinetic theory of gases assumes that every collision between them will be fully elastic. The energy and momenta of the molecules are conserved during collisions if the molecules are small. As a result, regardless of accidents, the temperature does not change.

Any collision in which there is no overall kinetic energy loss is said to be elastic. During an elastic collision, kinetic energy may be transmitted from one particle to another, but the combined energy of the colliding particles remains unchanged. Between gas particles, there are no forces of attraction or repulsion.

learn more about kinetic theory visit:

https://brainly.com/question/14349214

#SPJ4

The heat of fusion of water is 335.091 j/g when considering the concept of calorimetry, sensible heat, and latent heat.

What is a simple definition of calorimetry?

Calorimetry is a branch of science that measures a body's status with regard to temperature in order to look at changes in its physical and chemical composition. The changes could be chemical, like burning, acid-base neutralization, or physical, such melting or evaporation.

What is the calorimetry's fundamental tenet?

Calorimeter Theory

While the body at a lower temperature absorbs heat, the body at a higher temperature releases heat. The law of conservation of energy is demonstrated by the principle of calorimetry, which states that the total amount of heat lost by a heated body is equal to

Briefing:

The total heat required is calculated as:

Total heat required= Q1 + Q2 + Q3

Total heat required= 2.50 kJ + 49.3 g× ΔHfus + 9.21 kJ

Heating a 49.3 g sample of g ice from -25.0 °C to water at 44.7 °C requires 28.23 kJ of heat. This is, the total heat required is 28.23 kJ. Then:

28.23 kJ= 2.50 kJ + 49.3 g× ΔHfus + 9.21 kJ

Solving:

28.23 kJ= 11.71 kJ + 49.3 g× ΔHfus

28.23 kJ- 11.71 kJ = 49.3 g× ΔHfus

16.52 kJ = 49.3 g× ΔHfus

16.52 kJ / 49.3 g= ΔHfus

0.335091= 335.091  =ΔHfus

In summary, the heat of fusion of water is 335.091  .

To know more about calorimetry visit:

https://brainly.com/question/11477213

#SPJ4

Molecular formula is n times the empirical formula, where n is integers 1,2,... The empirical formula is F[tex]_3[/tex]N[tex]_4[/tex]O[tex]_7[/tex]. Therefore, the molecular formula of the given compound is F[tex]_6[/tex]N[tex]_8[/tex]O[tex]_{14}[/tex].

Molecular formula is a chemical formula for a compound existing as discrete molecules that gives the total number of atoms of each element in a molecule.

Number of gram atoms in compound and Divide by smallest Number of gram atoms in compound

F=(25.31%)÷18=1.40÷1.40=3

N=(24.82%)÷14=1.77÷1.40=4

O=(49.87%)÷16=3.11÷1.40=7

The atomic ratio is 1:1.21:2.2

Whole number  is 1:1:2

Empirical formula corresponding to this whole number is F[tex]_3[/tex]N[tex]_4[/tex]O[tex]_7[/tex].

molecular formula mass= n ×empirical formula mass

450.08g= n ×225.04

n= 2

molecular formula= F[tex]_6[/tex]N[tex]_8[/tex]O[tex]_{14}[/tex]

Therefore, the molecular formula of the given compound is  F[tex]_6[/tex]N[tex]_8[/tex]O[tex]_{14}[/tex].

To know more about molecular formula, here:

https://brainly.com/question/28647690

#SPJ1

For the breakdown of 1 mol of calcite to carbon dioxide plus white precipitate oxide at 25°c, the standard reaction entropy is 160.6 J/mol*K.

In a chemical reaction, one or more materials known as reactants—are changed into one or more additional substances as products. Chemical elements or chemical compounds make up substances.

Synthesis, decomposition, only one, double-replacement, and combustion are the five fundamental varieties of chemical reactions. You can classify a reaction into one of these groups by looking at the reactants and products. Several categories will apply to some reactions.

To know more about Reaction visit:

https://brainly.com/question/28984750

#SPJ4

The complete question is-

Calculate the standard reaction entropy for the decomposition of 1 mol calcite to carbon dioxide gas and solid calcium oxide at 25°C.

CaCO₃ (s) → CO₂ (g) + CaO (s)

(a). -160.6 J/mol*K

(b). 160.6 J/mol*K

(c). 346.4 J/mol*K

(d). -266.9 J/mol*K