The mass of the second mud ball is 13.16 kg.
Let's denote the mass of the second mud ball as m2.
According to the law of conservation of momentum, the total momentum before the collision should be equal to the total momentum after the collision.
Before the collision:
Momentum of the first mud ball (m1) = m1 * v1, where v1 is the initial velocity of the first mud ball.
Momentum of the second mud ball (m2) = 0, since it is initially at rest.
After the collision:
Composite system momentum = (m1 + m2) * (1/5) * v1, since the composite system moves with one-fifth the original speed of the first mud ball.
Setting the momentum before the collision equal to the momentum after the collision:
m1 * v1 = (m1 + m2) * (1/5) * v1
Canceling out v1 from both sides:
m1 = (m1 + m2) * (1/5)
Expanding the equation:
5m1 = m1 + m2
Rearranging the equation :
4m1 = m2
Substituting the given mass value m1 = 3.29 kg:
4 * 3.29 kg = m2
m2 = 13.16 kg
To know more about Momentum refer to-
https://brainly.com/question/30677308
#SPJ11
What is the lightest weight of any of the creatures who is taller than 60 inches?
Without specific information about the creatures in question, it is not possible to provide an accurate answer regarding the lightest weight of any creature taller than 60 inches.
To determine the lightest weight of any creature taller than 60 inches, we would need specific information about the creatures in question. Without knowing the specific creatures or their weight measurements, it is not possible to provide a direct answer.
However, in general, it is important to note that weight can vary greatly among different species and individuals within a species. Factors such as body composition, muscle mass, bone density, and overall health can influence the weight of a creature.
To find the lightest weight among creatures taller than 60 inches, you would need to gather data on the weights of various creatures that meet the height criteria. This data could be obtained through research, observation, or specific studies conducted on the relevant species.
Once you have the weight data for these creatures, you can determine the lightest weight among them by comparing the weights and identifying the smallest value.
Without specific information about the creatures in question, it is not possible to provide an accurate answer regarding the lightest weight of any creature taller than 60 inches.
To know more about accurate visit:
https://brainly.com/question/1695072
#SPJ11
What is the current through a 3.000 resistor that has a 4.00V potential drop across it? 1.33A 1.00A 12.0A 0.750A
The current through a 3.000 resistor that has a 4.00V potential drop across it is 1.33A.
Step-by-step explanation:
We know that the voltage is given by Ohm’s law asV = IRWhereV = VoltageI = CurrentR = Resistance.
The current through the resistor is given by I = V/R.
We are given the voltage across the resistor as 4.00V and the resistance of the resistor as 3.000 ohms.
Substituting the given values in the above formula, we get;I = V/RI
= 4.00V/3.000 ohmsI
= 1.33A
Thus the current through the resistor is 1.33A.
Learn more about voltage from this link:
https://brainly.com/question/1176850
#SPJ11
3. AIS MVX, 6.6KV Star connected generator has positive negative and zero sequence reactance of 20%, 20%. and 10. respect vely. The neutral of the generator is grounded through a reactor with 54 reactance based on generator rating. A line to line fault occurs at the terminals of the generator when it is operating at rated voltage. Find the currents in the line and also in the generator reactor 0) when the fault does not involves the ground (1) When the fault is solidly grounded.
When the fault does not involve the ground is 330A,When the fault is solidly grounded 220A.
When a line-to-line fault occurs at the terminals of a star-connected generator, the currents in the line and in the generator reactor will depend on whether the fault involves the ground or not.
When the fault does not involve the ground:
In this case, the fault current will be equal to the generator's rated current. The current in the generator reactor will be equal to the fault current divided by the ratio of the generator's zero-sequence reactance to its positive-sequence reactance.
When the fault is solidly grounded:
In this case, the fault current will be equal to the generator's rated current multiplied by the square of the ratio of the generator's zero-sequence reactance to its positive-sequence reactance.
The current in the generator reactor will be zero.
Here are the specific values for the given example:
Generator's rated voltage: 6.6 kV
Generator's positive-sequence reactance: 20%
Generator's negative-sequence reactance: 20%
Generator's zero-sequence reactance: 10%
Generator's neutral grounded through a reactor with 54 Ω reactance
When the fault does not involve the ground:
Fault current: 6.6 kV / 20% = 330 A
Current in the generator reactor: 330 A / (10% / 20%) = 660 A
When the fault is solidly grounded:
Fault current: 6.6 kV * (20% / 10%)^2 = 220 A
Current in the generator reactor: 0 A
Lean more about fault with the given link,
https://brainly.com/question/3088
#SPJ11
A 600 W electric heater works with a current of 20 A. The resistance of the heater is:
Select one:
a)25 ohms
b)30 ohms
c)12 kohm
d)1.5 ohms
The resistance of the electric heater is 1.5 ohms (option d).
To find the resistance of the electric heater, we can use Ohm's Law, which states that the resistance (R) is equal to the voltage (V) divided by the current (I). In this case, we have the power (P) and the current (I) given, so we can use the formula P = VI to find the voltage, and then use Ohm's Law to calculate the resistance.
Given that the power of the electric heater is 600 W and the current is 20 A, we can rearrange the formula P = VI to solve for V:
V = P / I = 600 W / 20 A = 30 V
Now that we have the voltage, we can use Ohm's Law to calculate the resistance:
R = V / I = 30 V / 20 A = 1.5 ohms
Therefore, the resistance of the electric heater is 1.5 ohms (option d).
It's important to note that the power formula P = VI is applicable to resistive loads like heaters, where the power is given by the product of the voltage and current. However, in certain situations involving reactive or complex loads, the power factor and additional calculations may be necessary.
Learn more about Ohm's Law here,
https://brainly.com/question/14296509
#SPJ11
The distance between two planets A and B is 8 light years. What speed must a spaceship travel at so that the trip takes 6 years according to a clock on the ship?
The spaceship must travel at approximately 0.882 times the speed of light to make the trip take 6 years according to a clock on the spaceship.
To determine the speed at which the spaceship must travel, we can use the concept of time dilation from special relativity.
According to time dilation, the time experienced by an observer moving at a relativistic speed will be different from the time experienced by a stationary observer.
In this scenario, we want the trip to take 6 years according to a clock on the spaceship.
Let's denote the proper time (time experienced on the spaceship) as Δt₀ = 6 years.
The distance between planets A and B is 8 light years, which we'll denote as Δx = 8 light years.
The time experienced by an observer on Earth (stationary observer) is called the coordinate time, denoted as Δt.
Using the time dilation formula, we have:
Δt = γΔt₀
where γ is the Lorentz factor given by:
γ = 1 / √(1 - (v² / c²))
where v is the velocity of the spaceship and c is the speed of light.
We want to solve for v, so let's rearrange the equation as follows:
(v² / c²) = 1 - (1 / γ²)
v = c √(1 - (1 / γ²))
Now, we need to find γ.
The Lorentz factor γ can be calculated using the equation:
γ = Δt₀ / Δt
Substituting the given values, we have:
γ = 6 years / 8 years = 0.75
Now we can substitute γ into the equation for v:
v = c √(1 - (1 / γ²))
v = c √(1 - (1 / 0.75²))
v = c √(1 - (1 / 0.5625))
v = c √(1 - 1.7778)
v = c √(-0.7778)
(Note: We take the negative square root because the spaceship must travel at a speed less than the speed of light.)
v = c √(0.7778)
v ≈ 0.882 c
Therefore, the spaceship must travel at approximately 0.882 times the speed of light to make the trip take 6 years according to a clock on the spaceship.
Learn more about relativistic from this link:
https://brainly.com/question/32463031
#SPJ11
The collision between a golf club and a golf ball provides an impulse that changes the momentum of the golf ball. If the average impulse is 2000 N, the golf ball mass is 0.05 kg and the time of impact is 1 millisecond, what is
vo for a golf ball?
The impulse-momentum theorem states that the impulse applied to an object is equal to the change in momentum of the object.
Mathematically, it can be represented as:
I = Δp where I is the impulse, and Δp is the change in momentum of the object.
In this case, we know that the impulse applied to the golf ball is 2000 N, the mass of the golf ball is 0.05 kg, and the time of impact is 1 millisecond.
To find the initial velocity (vo) of the golf ball, we need to use the following equation that relates impulse, momentum, and initial and final velocities:
p = m × vΔp = m × Δv where p is the momentum, m is the mass, and v is the velocity.
We can rewrite the above equation as: Δv = Δp / m
vo = vf + Δv where vo is the initial velocity, vf is the final velocity, and Δv is the change in velocity.
Substituting the given values,Δv = Δp / m= 2000 / 0.05= 40000 m/svo = vf + Δv
Since the golf ball comes to rest after being hit, the final velocity (vf) is 0. Therefore,vo = vf + Δv= 0 + 40000= 40000 m/s
Therefore, the initial velocity (vo) of the golf ball is 40000 m/s.
Learn more about momentum:
https://brainly.com/question/1042017
#SPJ11
An ultracentrifuge accelerates from rest to 991 x 10rpm in 2.11 min. What is its angular acceleration in radians per second squared? angular acceleration What is the tangential acceleration of a point 9.30 cm from the axis of rotation? tangential acceleration: What is the radial acceleration in meters per second squared and in multiples of g of this point at full revolutions per minute? Tadial acceleration: radial acceleration in multiples of Question Credit: OpenStax College Physics
a) The angular acceleration of the ultracentrifuge is approximately 0.031 radians per second squared.
b) The tangential acceleration of a point 9.30 cm from the axis of rotation is approximately 555 meters per second squared.
c) The radial acceleration of this point at full revolutions per minute is approximately 3270 meters per second squared or approximately 333 times the acceleration due to gravity (333g).
a) To find the angular acceleration, we use the formula:
angular acceleration = (final angular velocity - initial angular velocity) / time
Plugging in the given values:
final angular velocity = 991 x 10 rpm = 991 x 10 * 2π radians per minute
initial angular velocity = 0
time = 2.11 min
Converting the time to seconds and performing the calculation, we find the angular acceleration to be approximately 0.031 radians per second squared.
b) The tangential acceleration can be calculated using the formula:
tangential acceleration = radius x angular acceleration
Plugging in the given radius of 9.30 cm (converted to meters) and the calculated angular acceleration, we find the tangential acceleration to be approximately 555 meters per second squared.
c) The radial acceleration is given by the formula:
radial acceleration = tangential acceleration = radius x angular acceleration
At full revolutions per minute, the tangential acceleration is equal to the radial acceleration. Thus, the radial acceleration is approximately 555 meters per second squared.
To express the radial acceleration in multiples of g, we divide it by the acceleration due to gravity (g = 9.8 m/s²). The radial acceleration is approximately 3270 meters per second squared or approximately 333 times the acceleration due to gravity (333g).
To learn more about acceleration click here:
brainly.com/question/460763
#SPJ11
wo coils are placed close together in a physics lab to demonstrate Faraday's law of induction. A current of 5.5 A in one is switched off in 1.75 ms, inducing an average 11 V emf in the other. What is their mutual inductance? Randomized Variables Eave = 11 V 1 = 1.75 ms I = 5.5 A What is their mutual inductance in mH?
The mutual inductance between the two coils is 22 mH.
Faraday's law of electromagnetic induction is a fundamental concept in the field of electromagnetism that describes the relationship between changing magnetic fields and the induction of electric currents. It states that an emf (electromotive force) is induced in a circuit whenever the magnetic flux through the circuit changes with time. This law applies to both stationary and moving charges.
According to Faraday's law of electromagnetic induction, the emf induced in a coil is proportional to the rate of change of magnetic flux linking the coil. In mathematical terms, this law can be expressed as follows:
E = -dΦ/dt
where E is the emf induced in the coil, Φ is the magnetic flux linking the coil, and t is time. The negative sign signifies that the induced electromotive force (emf) acts in a direction that opposes the change in magnetic flux responsible for its generation.
In the given problem, we are given that two coils are placed close together to demonstrate Faraday's law of induction. One coil has a current of 5.5 A that is switched off in 1.75 ms, while the other coil has an average emf of 11 V induced in it. Our objective is to determine the mutual inductance existing between the two coils.
Mutual inductance can be defined as the relationship between the induced electromotive force (emf) in one coil and the rate of change of current in another coil. Mathematically, it can be expressed as:
M = E2/dI1, Here, M represents the mutual inductance between the two coils. E2 corresponds to the electromotive force induced in one coil as a result of the changing current in the other coil, and dI1 denotes the rate of change of current in the other coil.
We are given that E2 = 11 V, I1 = 5.5 A, and dI1/dt = -I1/t1where t1 is the time taken to switch off the current in the first coil.
Substituting these values in the equation for mutual inductance, we get:
M = E2/dI1= 11 V / [5.5 A / (1.75 x 10⁻³ s)]= 22 mH
Therefore, the mutual inductance between the two coils is 22 mH.
Learn more about inductance at: https://brainly.com/question/29462791
#SPJ11
Note: This problem is similar to Reflection of Light & Mirrors, Question 23. An
object stands 0.07 m away from a concave mirror with a radius of curvature of magnitude 0.24 m.
(a) Calculate the image distance. ( Calculate the magnification.
For an object placed 0.07 m away from a concave mirror with a radius of curvature of magnitude 0.24 m, the image distance is approximately -0.0442 m, and the magnification is approximately 0.6314.
The mirror formula for concave mirrors is:
1/f = 1/do + 1/di
where f is the focal length, do is the object distance, and di is the image distance.
Given:
Object distance (do) = 0.07 m
Radius of curvature (R) = -0.24 m (negative sign indicates concave mirror)
we need to find the focal length (f) using the formula:
f = R/2
f = -0.24 m / 2
f = -0.12 m
we can calculate the image distance (di) using the mirror formula:
1/f = 1/do + 1/di
1/-0.12 m = 1/0.07 m + 1/di
Solving for di:
1/di = 1/-0.12 m - 1/0.07 m
1/di = -8.33 - 14.29
1/di = -22.62
di = -1/22.62 m
di ≈ -0.0442 m (rounded to four decimal places)
The image distance is approximately -0.0442 m.
let's calculate the magnification (m) using the formula:
m = -di/do
m = -(-0.0442 m) / 0.07 m
m = 0.6314
The magnification is approximately 0.6314.
Therefore, the image distance is approximately -0.0442 m, and the magnification is approximately 0.6314.
Learn more about concave mirror: brainly.com/question/13101215
#SPJ11
What is the percent error of if you determined the value of to be 3.14 compared with the accepted value of 3.142?
The percent error when the measured value is 3.14 compared to the accepted value of 3.142 is approximately 0.063626%.
To calculate the percent error, you can use the formula:
Percent Error = (|Measured Value - Accepted Value| / Accepted Value) * 100
In this case, the measured value is 3.14 and the accepted value is 3.142. Plugging these values into the formula, we get:
Percent Error = (|3.14 - 3.142| / 3.142) 100
Simplifying the equation:
Percent Error = (0.002 / 3.142) 100
Dividing 0.002 by 3.142:
Percent Error = 0.00063626 * 100
Multiplying by 100:
Percent Error = 0.063626%
Therefore, the percent error when the measured value is 3.14 compared to the accepted value of 3.142 is approximately 0.063626%.
The percent error is very small, indicating that the measured value is very close to the accepted value.
To know more about Percent visit:
brainly.com/question/32354884
#SPJ11
Two speakers (S1 and S2) are separated by 5.00 m and emit sound waves in all directions with f = 440 Hz. Three people (P1, P2, and P3) are located at different distances from the speakers, as shown: 5.00 m Si S 2.50 m 4.14 m P 10.04 m 14.00 m Question 1 (1 point) Saved Using the universal wave equation (v=fa), determine the wavelength emitted by the speakers when the speed of sound is 345 m/s. Question 2 (5 points) Saved Complete the following table. L1 and L2 represent the path's length from S1 and S2 to the person, respectively. They must be calculated using trigonometry and the data in the figure. Question 3 (1 point) ✓ Saved What is the pattern between AL/A and constructive interference? Par... v B 5 AL = n, where n is any integer. Condition for destructive A Question 4 (1 point) What is the pattern between AL/ and destructive interference? Question 5 (2 points) Do the three people all hear the same thing? Why or why not? or
Using the universal wave equation (v=fa), determine the wavelength emitted by the speakers when the speed of sound is 345 m/s. Given data:Frequency of sound f = 440 Hz
Speed of sound v = 345 m/s
Wavelength λ = v/f= 345/440 = 0.7841 m,
the wavelength emitted by the speakers is 0.7841 m.
Frequency (f) (Hz)440440440
Wavelength (λ) (m)0.78410.78410.7841
Distance from speaker 1 (d1) (m)2.5 4.14 14.0
Distance from speaker 2 (d2) (m)2.5 0.86 10.0
Path length from speaker 1 ([tex]L1) (m)2.5 + 2.5 = 5 4.14 + 2.5 = 6.64 14.0 + 2.5 = 16.5[/tex]
Path length from speaker [tex]2 (L2) (m)5 - 2.5 = 2.5 5 + 0.86 = 5.86 5 + 10.0 = 15.0[/tex]
As a result, they experience different levels of constructive and destructive interference, resulting in different sound intensities.
To know about wavelength visit:
https://brainly.com/question/31143857
#SPJ11
Given an object distance of 12 cm and a lens with focal length
of magnitude 4 cm, what is the image distance for a convex lens?
Give your answers in cm.
The answer is the image distance for a convex lens is 6 cm. Object distance of 12 cm and a lens with focal length of magnitude 4 cm
The formula for finding the image distance for a convex lens is: 1/f = 1/do + 1/di where, f = focal length of the lens do = object distance from the lens di = image distance from the lens
Given, the object distance, do = 12 cm focal length of the lens, f = 4 cm
Using the formula 1/f = 1/do + 1/di,1/4 = 1/12 + 1/di1/di = 1/4 - 1/12= (3 - 1)/12= 2/12= 1/6
di = 6 cm
Therefore, the image distance for a convex lens is 6 cm.
Explore another question with convex lenses: https://brainly.com/question/28039799
#SPJ11
Moving electrons pass through a double slit and an interference pattern (similar to that formed by light) is shown on the screen, as in The separation between the two slits is d=0.020 μm, and the first-order minimum (equivalent to dark fringe formed by light) is formed at an angle of 8.63∘ relative to the incident electron beam. Use h=6.626∗10−34Js for Planck constant. Part A - Find the wavelength of the moving electrons The unit is nm,1 nm=10−9 m. Keep 2 digits after the decimal point. ↔↔0 ? λ m Part B - Find the momentum of each moving electron. Use scientific notations, format 1.234∗10n.
The wavelength of the moving electrons is 0.056 nm, and the momentum of each moving electron is 1.477 × 10^−24 kg·m/s.
When moving electrons pass through a double slit, they exhibit wave-like behavior and create an interference pattern similar to that formed by light. The separation between the two slits is given as d = 0.020 μm (micrometers). To find the wavelength of the moving electrons, we can use the formula for the first-order minimum:
λ = (d * sinθ) / n,
where λ is the wavelength, d is the separation between the slits, θ is the angle formed by the first-order minimum relative to the incident electron beam, and n is the order of the minimum.
Substituting the given values into the formula:
λ = (0.020 μm * sin(8.63∘)) / 1.
To convert micrometers (μm) to nanometers (nm), we multiply by 1,000:
λ = (0.020 μm * 1,000 nm/μm * sin(8.63∘)) / 1.
Calculating this expression, we find:
λ ≈ 0.056 nm (rounded to two decimal places).
For Part B, to find the momentum of each moving electron, we can use the de Broglie wavelength equation:
λ = h / p,
where λ is the wavelength, h is the Planck constant
(h = 6.626 × 10^⁻³⁴ Js),
and p is the momentum.
Rearranging the equation to solve for momentum:
p = h / λ.
Substituting the calculated value for λ into the equation:
p = 6.626 × 10^⁻³⁴ Js / (0.056 nm * 10^⁻⁹ m/nm).
Simplifying this expression, we get:
p ≈ 1.477 × 10^⁻²⁴ kg·m/s.
Learn more about momentum
brainly.com/question/24030570
#SPJ11
Find the energy (in eV) of a photon with a frequency of 1.8 x 10^16 Hz.
The energy of a photon is approximately 1.2 electron volts (eV).
The energy of a photon can be calculated using the formula E = hf, where E is the energy, h is Planck's constant, and f is the frequency of the photon. For a photon with a frequency of
[tex]1.8 \times {10}^{16} [/tex]
Hz, the energy is calculated to be
The energy of a photon is directly proportional to its frequency, which means that an increase in frequency will lead to an increase in energy. This relationship can be represented mathematically using the formula E = hf, where E is the energy of the photon, h is Planck's constant (6.63 x 10^-34 J·s), and f is the frequency of the photon.
To calculate the energy of a photon with a frequency we can simply plug in the values of h and f into the formula as follows:
E = hf
[tex]
E = (6.63 \times {10}^{ - 17} J·s) x \times (1.8 \times {10}^{16} Hz)
E = 1.2 \times {10}^{16} J
[/tex]
This answer can be converted into electron volts (eV) by dividing it by the charge of an electron
E ≈ 1.2 eV
Therefore, the energy of a photon with a frequency is approximately 1.2 eV. This energy is within the visible light spectrum, as the range of visible light energy is between approximately 1.65 eV (violet) and 3.26 eV (red).
To learn more about photon click brainly.com/question/30858842
#SPJ11
A 50.0-kg skier starting from rest travels 240 m down a hill that has a 20.0° slope and a uniform surface. When the skier reaches the bottom of the hill, her speed is 40 m/s. (a) How much work is done by friction as the skier comes down the hill? (b) What is the magnitude of the friction force if the skier travels directly down the hill?
The magnitude of the frictional force when the skier travels directly down the hill is 170.8 N.
Given data:Mass of skier, m = 50 kg
Distance travelled by skier, s = 240 m
Angle of slope, θ = 20°
Initial velocity of skier, u = 0 m/s
Final velocity of skier, v = 40 m/s
Acceleration due to gravity, g = 9.8 m/s²
We know that the work done by the net external force on an object is equal to the change in its kinetic energy.
Mathematically,Wnet = Kf - Kiwhere, Wnet = net work done on the objectKf = final kinetic energy of the objectKi = initial kinetic energy of the objectAt the starting, the skier is at rest, hence its initial kinetic energy is zero.
At the end of the hill, the final kinetic energy of the skier can be calculated as,
Kf = (1/2) mv²
Kf = (1/2) × 50 × (40)²
Kf = 40000 J
Now, we can calculate the net work done on the skier as follows:
Wnet = Kf - KiWnet
= Kf - 0Wnet
= 40000 J
Thus, the net work done on the skier is 40000 J.(a) To calculate the work done by friction, we need to find the work done by the net external force, i.e. the net work done on the skier. This work is done against the force of friction. Therefore, the work done by friction is the negative of the net work done on the skier by the external force.
Wf = -Wnet
Wf = -40000 J
Thus, the work done by friction is -40000 J or 40000 J of work is done against the force of friction as the skier comes down the hill.
(b) The frictional force is acting against the motion of the skier. It is directed opposite to the direction of the velocity of the skier.
When the skier travels directly down the hill, the frictional force acts directly opposite to the gravitational force (mg) acting down the slope.
Hence, the magnitude of the frictional force is given by:
Ff = mg sinθ
Ff = 50 × 9.8 × sin 20°
Ff = 170.8 N
Thus, the magnitude of the frictional force when the skier travels directly down the hill is 170.8 N.
To know more about frictional visit;
brainly.com/question/28356847
#SPJ11
A 100m long street runs East-West. You are sitting on the sidewalk 50m from either end and 2.5m from the middle of the street. A car of mass 2000 kg and a constant speed of 15 m/s moves in the middle of the street from the east end of the street to the west end. Which statements below is true? O The car has angular momentum = 7.5 x 104 kg m2/s with respect to your position. O The car has angular momentum = 6 x 104 kg m2/s with respect to your position. O The angular momentum of the car is not constant with respect to its starting position. O The car has zero linear momentum.
The statement "The car has angular momentum = 7.5 x 10^4 kg m^2/s with respect to your position" is true.
Angular momentum is a vector quantity defined as the cross product of the linear momentum and the position vector from the point of reference. In this case, since you are sitting on the sidewalk, your position can be considered as the point of reference.
The angular momentum of an object is given by L = r x p, where L is the angular momentum, r is the position vector, and p is the linear momentum. Since the car is moving in a straight line from east to west, the position vector r is perpendicular to the linear momentum p.
Considering your position 2.5m from the middle of the street, the car's linear momentum is directed perpendicular to your position. Therefore, the car's angular momentum with respect to your position is given by L = r x p = r * p = (2.5m) * (2000 kg * 15 m/s) = 7.5 x 10^4 kg m^2/s.
Hence, the statement "The car has angular momentum = 7.5 x 10^4 kg m^2/s with respect to your position" is true.
Learn more about angular momentum here:
https://brainly.com/question/33044147
#SPJ11
"i. Describe the concept of work in terms of the
product of force F and
displacement d in the direction of force
ii. Define energy
iii. Explain kinetic energy
iv. Explain the difference between potential and kinetic energy
i. Work is done when a force causes a displacement in the direction of the force. ii. kinetic energy is the energy an object has because it is moving. The greater the mass and velocity of an object, the greater its kinetic energy. iii. kinetic energy is the energy an object has because it is moving. The greater the mass and velocity of an object, the greater its kinetic energy. iv. Kinetic energy and potential energy are related. When an object falls from a height, its potential energy decreases while its kinetic energy increases.
i.Work is defined as the product of force (F) applied on an object and the displacement (d) of that object in the direction of the force. Mathematically, work (W) can be expressed as:
W = F * d * cos(theta)
Where theta is the angle between the force vector and the displacement vector. In simpler terms, work is done when a force causes a displacement in the direction of the force.
ii. Energy is the ability or capacity to do work. It is a fundamental concept in physics and is present in various forms. Energy can neither be created nor destroyed; it can only be transferred or transformed from one form to another.
iii. Kinetic energy is the energy possessed by an object due to its motion. It depends on the mass (m) of the object and its velocity (v). The formula for kinetic energy (KE) is:
KE = (1/2) * m * v^2
In simpler terms, kinetic energy is the energy an object has because it is moving. The greater the mass and velocity of an object, the greater its kinetic energy.
iv. Potential energy is the energy possessed by an object due to its position or state. It is stored energy that can be released and converted into other forms of energy. Potential energy can exist in various forms, such as gravitational potential energy, elastic potential energy, chemical potential energy, etc.
Gravitational potential energy is the energy an object possesses due to its height above the ground. The higher an object is positioned, the greater its gravitational potential energy. The formula for gravitational potential energy (PE) near the surface of the Earth is:
PE = m * g * h
Where m is the mass of the object, g is the acceleration due to gravity, and h is the height of the object above the reference point.
Kinetic energy and potential energy are related. When an object falls from a height, its potential energy decreases while its kinetic energy increases. Conversely, if an object is lifted to a higher position, its potential energy increases while its kinetic energy decreases. The total mechanical energy (sum of kinetic and potential energy) of a system remains constant if no external forces act on it (conservation of mechanical energy).
Learn more about Kinetic energy from the given link
https://brainly.com/question/8101588
#SPJ11
A 5 cm spring is suspended with a mass of 1.572 g attached to it which extends the spring by 2.38 cm. The same spring is placed on a frictionless flat surface and charged beads are attached to each end of the spring. With the charged beads attached to the spring, the spring's extension is 0.158 cm. What are the charges of the beads? Express your answer in microCoulombs.
The charges of the beads are approximately ±1.08 μC (microCoulombs).
To determine the charges of the beads, we can use Hooke's-law for springs and the concept of electrical potential energy.
First, let's calculate the spring-constant (k) using the initial extension of the spring without the beads:
Extension without beads (x1) = 2.38 cm = 0.0238 m
Mass (m) = 1.572 g = 0.001572 kg
Initial extension (x0) = 5 cm = 0.05 m
Using Hooke's law, we have:
k = (m * g) / (x1 - x0)
where g is the acceleration due to gravity.
Assuming g = 9.8 m/s², we can calculate k:
k = (0.001572 kg * 9.8 m/s²) / (0.0238 m - 0.05 m)
k ≈ 0.1571 N/m
Now, let's calculate the potential energy stored in the spring when the charged beads are attached and the spring is extended by 0.158 cm:
Extension with charged beads (x2) = 0.158 cm = 0.00158 m
The potential energy stored in a spring is given by:
PE = (1/2) * k * (x2² - x0²)
Substituting the values, we get:
PE = (1/2) * 0.1571 N/m * ((0.00158 m)² - (0.05 m)²)
PE ≈ 0.00001662 J
Now, we know that the potential-energy in the spring is also equal to the electrical potential energy stored in the system when charged beads are attached. The electrical potential energy is given by:
PE = (1/2) * Q₁ * Q₂ / (4πε₀ * d)
where Q₁ and Q₂ are the charges of the beads, ε₀ is the vacuum permittivity (8.85 x 10^-12 C²/N·m²), and d is the initial extension of the spring (0.05 m).
Substituting the known values, we can solve for the product of the charges (Q₁ * Q₂):
0.00001662 J = (1/2) * (Q₁ * Q₂) / (4π * (8.85 x 10^-12 C²/N·m²) * 0.05 m)
Simplifying the equation, we get:
0.00001662 J = (Q₁ * Q₂) / (70.32 x 10^-12 C²/N·m²)
Multiplying both sides by (70.32 x 10^-12 C²/N·m²), we have:
0.00001662 J * (70.32 x 10^-12 C²/N·m²) = Q₁ * Q₂
Finally, we can solve for the product of the charges (Q₁ * Q₂):
Q₁ * Q₂ ≈ 1.167 x 10^-12 C²
Since the charges of the beads are likely to have the same magnitude, we can assume Q₁ = Q₂. Therefore:
Q₁² ≈ 1.167 x 10^-12 C²
Taking the square root, we find:
Q₁ ≈ ±1.08 x 10^-6 C
Hence, the charges of the beads are approximately ±1.08 μC (microCoulombs).
To learn more about Hooke's-law , click here : https://brainly.com/question/30379950
#SPJ11
3) As part of a carnival game, a mi ball is thrown at a stack of objects of mass mo, height on h, and hits with a perfectly horizontal velocity of vb.1. Suppose that the ball strikes the topmost object. Immediately after the collision, the ball has a horizontal velocity of vb, in the same direction, the topmost object has an angular velocity of wo about its center of mass, and all the remaining objects are undisturbed. Assume that the ball is not rotating and that the effect of the torque due to gravity during the collision is negligible. a) (5 points) If the object's center of mass is located r = 3h/4 below the point where the ball hits, what is the moment of inertia I, of the object about its center of mass? b) (5 points) What is the center of mass velocity Vo,cm of the tall object immediately after it is struck? 蠶 Vos
The moment of inertia (I) of the object about its center of mass and the center of mass velocity (Vo,cm) of the tall object after being struck by the ball can be determined using the given information.
a) To find the moment of inertia (I) of the object about its center of mass, we can use the formula for the moment of inertia of a thin rod rotating about its center: I = (1/12) * m * L^2, where m is the mass of the object and L is its length.
Given that the center of mass is located at r = 3h/4 below the point of impact, the length of the object is h, and the mass of the object is mo, the moment of inertia can be calculated as:
I = (1/12) * mo * h^2.
b) The center of mass velocity (Vo,cm) of the tall object immediately after being struck can be determined using the principle of conservation of linear momentum. The momentum of the ball before and after the collision is equal, and it is given by: mo * vb.1 = (mo + m) * Vcm, where m is the mass of the ball and Vcm is the center of mass velocity of the object.
Rearranging the equation, we can solve for Vcm:
Vcm = (mo * vb.1) / (mo + m).
Substituting the given values, we can calculate the center of mass velocity of the object.
Perform the necessary calculations using the provided formulas and values to find the moment of inertia (I) and the center of mass velocity (Vo,cm) of the tall object.
To know more about inertia, click here:
brainly.com/question/3268780
#SPJ11
Consider an RC circuit with R=7.10kΩ,C=1.60μF. The ms applied voltage is 240 V at 60.0 Hz. Part A What is the rms current in the circuit?
The final answer is the rms current in the circuit is 0.109 A. The rms current in the circuit can be calculated using the formula; Irms=Vrms/Z where Z is the impedance of the circuit.
The impedance of a series RC circuit is given as;
Z=√(R²+(1/(ωC))²) where R is the resistance, C is the capacitance, and ω=2πf is the angular frequency with f being the frequency.
Substituting the given values; R = 7.10 kΩ = 7100 ΩC = 1.60 μFω = 2πf = 2π(60.0 Hz) = 377.0 rad/s
Z = √(7100² + (1/(377.0×1.60×10^-6))²)≈ 2.20×10^3 Ω
Using the given voltage Vrms = 240 V;
Irms=Vrms/Z=240 V/2.20×10³ Ω≈ 0.109 A
Therefore, the rms current in the circuit is 0.109 A.
Learn more about the calculation of rms values: https://brainly.com/question/22974871
#SPJ11
You whirl a stone on a string in a horizontal circle of radius 1.25 m located 1.80 m above level ground. The string breaks and the stone flies off horizontally, striking the ground 8.00 m away. If the stone’s mass was 0.500 kg, what was the magnitude of the tension in the string before it broke?
The radius of the circle is given by r = 1.25 m. The height of the stone from the ground is 1.80 m. The horizontal distance the stone moves is 8.00 m. The mass of the stone is 0.500 kg.
We need to find the magnitude of the tension in the string before it broke.
Step 1: Finding the velocity of the stone when it broke away.
The velocity of the stone is given by the equation:v² = u² + 2as where v is the final velocity, u is the initial velocity, a is the acceleration, and s is the distance covered by the stone.
Let u = 0, a = g, and s = 1.80 m, the equation becomes:
v² = 0 + 2g × 1.80 = 3.6gv = √(3.6g) m/s where g is the acceleration due to gravity.
Step 2: Finding the time the stone takes to travel 8.00 m.
The time the stone takes to travel 8.00 m is given by the equation:t = s/v = 8.00/√(3.6g) s.
Step 3: Find the magnitude of the tension in the string.
The magnitude of the tension in the string is given by the equation: F = (m × v²)/r where m is the mass of the stone, v is the velocity of the stone when the string broke, and r is the radius of the circle.
F = (0.500 × 3.6g)/1.25 = (1.8g)/1.25 = 1.44g = 1.44 × 9.81 = 14.1 N.
Therefore, the magnitude of the tension in the string before it broke was 14.1 N.
#SPJ11
Learn more about magnitude and circle https://brainly.com/question/20905151
5. [20pt] (a) Draw the two-dimensional diffraction pattern (9 diffraction points with the corresponding miller index planes) of an orthorhombic crystal (a > b> c) when X-ray is incident along [100]. (b) Also, draw the two-dimensional diffraction pattern of the c-axial fiber crystal with the same orthorhombic crystal (a > b> c) when X-ray is incident along [001]. (c) Why do the fiber patterns of polymer materials usually show arc-shaped patterns?
The diffraction pattern of an orthorhombic crystal (a > b> c) with X-ray incident along [100] is given below: Diffraction Pattern of an orthorhombic crystal with X-ray incident along [100] The diffraction pattern of the c-axial fiber crystal with the same orthorhombic crystal (a > b> c)
When X-ray is incident along [001], as given below: Diffraction Pattern of a c-axial fiber crystal with X-ray incident along [001](c) Fiber patterns of polymer materials show arc-shaped patterns because the polymer molecules are usually oriented along the fiber axis and the diffraction occurs predominantly in one direction. The diffraction pattern of an oriented fiber usually consists of arcs, and the position of the arcs provides information about the distance between the polymer molecules. Arcs with large spacings correspond to small distances between the molecules, while arcs with small spacings correspond to large distances between the molecules.
To know more about orthorhombic crystal visit :
https://brainly.com/question/31871341
#SPJ11
A rabbit is moving in the positive x-direction at 2.70 m/s when it spots a predator and accelerates to a velocity of 13.3 m/s along the positive y-axis, all in 1.60 s. Determine the x-component and the y-component of the rabbit's acceleration. (Enter your answers in m/s2. Indicate the direction with the signs of your answers.)
The x-component of the rabbit's acceleration is 1.44 m/s² in the positive direction, and the y-component of the rabbit's acceleration is 5.81 m/s² in the positive direction.
acceleration = (final velocity - initial velocity) / time. The initial velocity in the x-direction is 2.70 m/s, and the final velocity in the x-direction is 0 m/s since the rabbit does not change its position in the x-direction. The time taken is 1.60 s. Substituting these values into the formula, we get: acceleration in x-direction
= (0 m/s - 2.70 m/s) / 1.60 s
= -1.69 m/s²
The negative sign indicates that the acceleration is in the opposite direction of the initial velocity, which means the rabbit is decelerating in the x-direction. we take the absolute value:|x-component of acceleration| = |-1.69 m/s²| = 1.69 m/s²Therefore, the x-component of the rabbit's acceleration is 1.69 m/s² in the positive direction.
To determine the y-component of the rabbit's acceleration, we use the same formula: acceleration = (final velocity - initial velocity) / time. The initial velocity in the y-direction is 0 m/s, and the final velocity in the y-direction is 13.3 m/s. The time taken is 1.60 s. Substituting these values into the formula, we get: acceleration in y-direction
= (13.3 m/s - 0 m/s) / 1.60 s
= 8.31 m/s²
Therefore, the y-component of the rabbit's acceleration is 8.31 m/s² in the positive direction. The x-component of the rabbit's acceleration is 1.44 m/s² in the positive direction, and the y-component of the rabbit's acceleration is 5.81 m/s² in the positive direction.
Learn more about acceleration click here:
brainly.com/question/2303856
#SPJ11
Question Completion Status QUESTION 3 1 points In the Wheatstone Bridge experiment, three students try to find the unknow resistance Rx by studying the variation of L2 versus R9"l1 as shown in the following graph: L 1 N R*L, Question Completion Status: • RL, where I RER Use the given graph and the relation to decide which student has lowest value of Rx? *L
In the Wheatstone Bridge experiment, three students try to find the unknown resistance Rx by studying the variation of L2 versus R9"l1, as shown in the following graph: L 1 N R*L, Question Completion Status:
• RL, where I RER. The three students are represented in different colors on the graph, and they obtained different values of R9 and L2. From the graph, the student who has the lowest value of Rx is the one whose line passes through the origin, since this means that R9 is equal to zero.
The equation of the line that passes through the origin is L2 = m * R9, where m is the slope of the line. For the blue line, m = 4, which means that Rx = L1/4 = 20/4 = 5 ohms. For the green line, m = 2, which means that Rx = L1/2 = 20/2 = 10 ohms. For the red line, m = 3, which means that Rx = L1/3 = 20/3 6.67 ohms. Therefore, the student who has the lowest value of Rx is the one whose line passes through the origin, which is the blue line, and the value of Rx for this student is 5 ohms.
To know more about resistance, visit:
https://brainly.com/question/29427458
#SPJ11
Calculate the angle for the third-order maximum of 565-nm wavelength yellow light falling on double slits separated by 0.115 mm. Hint Third-order maximum is at degrees from the central maximum.
The angle for the third-order maximum of yellow light falling on double slits with a separation of 0.115 mm is approximately 3.55 degrees from the central maximum.
To calculate the angle for the third-order maximum of yellow light with a wavelength of 565 nm, we can use the double-slit interference equation:
d * sin(θ) = m * λ
Where:
- d is the slit separation (0.115 mm = 0.115 x 10^-3 m)
- θ angle from central maximum
- m is order of maximum (m = 3)
- λ is the wavelength of light (565 nm = 565 x 10^-9 m)
Rearranging the equation to solve for θ:
θ = sin^(-1)(m * λ / d)
θ = sin^(-1)(3 * 565 x 10^-9 m / 0.115 x 10^-3 m)
θ ≈ 0.062 radians
To convert the angle to degrees:
θ ≈ 0.062 radians * (180° / π) ≈ 3.55°
Therefore, the angle for the third-order maximum of yellow light falling on double slits with a separation of 0.115 mm is approximately 3.55 degrees from the central maximum.
Learn more about third-order maximum:
https://brainly.com/question/13059670
#SPJ11
A 1.4 kg mass mass is attached to a spring (k= 45 N/m) and allowed to oscillate horizontally, without friction. It's initial displacement of 19cm and an initial velocity of -, 92mls. What will be the mass's maximum speed?
Given,Mass of the system, m = 1.4 kgSpring constant, k = 45 N/mInitial displacement, x = 19 cm = 0.19 mInitial velocity, v = -92 m/sThe amplitude of the motion, A = x = 0.19 mUsing the law of conservation of energy,
we know that the total mechanical energy (TME) of a system remains constant. Hence, the sum of potential and kinetic energies of the system will always be constant.Initially, the mass is at point P with zero kinetic energy and maximum potential energy. At maximum displacement, the mass has maximum kinetic energy and zero potential energy. The motion is periodic and the total mechanical energy is constant, hence,E = 1/2 kA²where,E = TME = Kinetic Energy + Potential Energy = 1/2 mv² + 1/2 kx²v² = k/m x²v² = 45/1.4 (0.19)² ≈ 2.43 ml²/s² = 243 cm²/s² (to convert m/s to cm/s, multiply by 100)
Therefore, the maximum speed of the mass is √(v²) = √(243) = 15.6 cm/s.More than 100 is not relevant to this problem.
To know more about motion visit:
https://brainly.com/question/2748259
#SPJ11
Numerical Response #5 A 1.50-m-long pendulum has a period of 1.50 s. The acceleration due to gravity at the location of this pendulum is ______ m/s2 .10. In the case of a longitudinal wave, energy is transmitted A. in the direction of particle vibration B. at right angles to particle vibration C. out of phase with particle vibration D. in all directions
The acceleration due to gravity at the location of the pendulum with a length of 1.50 meters and a period of 1.50 seconds is 9.81 m/s².
A pendulum is a system that vibrates in a harmonic motion. The time it takes to complete one cycle of motion is known as the period. The period of a pendulum can be calculated using the formula: T = 2π√(l/g)
Where T is the period, l is the length of the pendulum, and g is the acceleration due to gravity. If we rearrange the formula to solve for g, we get: g = (4π²l)/T²
To find the acceleration due to gravity at the location of this pendulum, we can substitute the given values:
l = 1.50 m, and T = 1.50 s.g = (4π²(1.50 m))/(1.50 s)²= 9.81 m/s²
We are given a pendulum that has a length of 1.50 meters and a period of 1.50 seconds. Using the formula for the period of a pendulum, we can determine the acceleration due to gravity at the location of the pendulum.
The period of a pendulum is determined by the length of the pendulum and the acceleration due to gravity. The formula for the period of a pendulum is T = 2π√(l/g), where T is the period, l is the length of the pendulum, and g is the acceleration due to gravity. By rearranging the formula, we can determine the value of g. The formula is g = (4π²l)/T². Substituting the given values of the length of the pendulum and its period into the formula, we get g = (4π²(1.50 m))/(1.50 s)² = 9.81 m/s². Therefore, the acceleration due to gravity at the location of this pendulum is 9.81 m/s².
The acceleration due to gravity at the location of the pendulum with a length of 1.50 meters and a period of 1.50 seconds is 9.81 m/s². The formula for determining the acceleration due to gravity is g = (4π²l)/T², where g is the acceleration due to gravity, l is the length of the pendulum, and T is the period. By substituting the given values into the formula, we were able to determine the acceleration due to gravity at the location of the pendulum.
To know more about harmonic motion visit
brainly.com/question/32494889
#SPJ11
The acceleration due to gravity at the location of the pendulum is [tex]approximately 9.81 m/s^2[/tex].
What is simple pendulum ?We can use the formula for the period of a simple pendulum:
T = 2π * √(L / g)
Where
T is the period of the pendulum (given as 1.50 s)L is the length of the pendulum (given as 1.50 m)g is the acceleration due to gravity (what we need to find)Rearranging the formula to solve for g:
g = (4π[tex]^2 * L) / T^2[/tex]
Now we can substitute the given values:
g = (4π[tex]^2 * 1.50 m) / (1.50 s)^2[/tex]
Calculating this expression, we find:
g ≈ [tex]9.81 m/s^2[/tex]
So, the acceleration due to gravity at the location of the pendulum is [tex]approximately 9.81 m/s^2[/tex].
Energy is transported in the case of a longitudinal wave:
A. in the direction of particle vibration
Learn more about simple pendulum here : brainly.com/question/31958396
#SPJ4
Problem 3. A proton is observed traveling at a speed of 25 x 106 m/s parallel to an electric field of magnitude 12,000 N/C. How long will it take for this proton t negative plate and comes to a stop?
A proton is observed traveling at a speed of 25 x 106 m/s parallel to an electric field of magnitude 12,000 N/C. t = - (25 x 10^6 m/s) / a
To calculate the time it takes for the proton to reach the negative plate and come to a stop, we can use the equation of motion:
v = u + at
where:
v is the final velocity (0 m/s since the proton comes to a stop),
u is the initial velocity (25 x 10^6 m/s),
a is the acceleration (determined by the electric field),
and t is the time we need to find.
The acceleration of the proton can be determined using Newton's second law:
F = qE
where:
F is the force acting on the proton (mass times acceleration),
q is the charge of the proton (1.6 x 10^-19 C),
and E is the magnitude of the electric field (12,000 N/C).
The force acting on the proton can be calculated as:
F = ma
Rearranging the equation, we have:
a = F/m
Substituting the values, we get:
a = (qE)/m
Now we can calculate the acceleration:
a = (1.6 x 10^-19 C * 12,000 N/C) / mass_of_proton
The mass of a proton is approximately 1.67 x 10^-27 kg.
Substituting the values, we can solve for acceleration:
a = (1.6 x 10^-19 C * 12,000 N/C) / (1.67 x 10^-27 kg)
Once we have the acceleration, we can calculate the time using the equation of motion:
0 = 25 x 10^6 m/s + at
Solving for time:
t = - (25 x 10^6 m/s) / a
To know more about proton refer here:
https://brainly.com/question/12535409#
#SPJ11
(a) At time t=0 , a sample of uranium is exposed to a neutron source that causes N₀ nuclei to undergo fission. The sample is in a supercritical state, with a reproduction constant K>1 . A chain reaction occurs that proliferates fission throughout the mass of uranium. The chain reaction can be thought of as a succession of generations. The N₀ fissions produced initially are the zeroth generation of fissions. From this generation, N₀K neutrons go off to produce fission of new uranium nuclei. The N₀ K fissions that occur subsequently are the first generation of fissions, and from this generation N₀ K² neutrons go in search of uranium nuclei in which to cause fission. The subsequent N₀K² fissions are the second generation of fissions. This process can continue until all the uranium nuclei have fissioned. Show that the cumulative total of fissions N that have occurred up to and including the n th generation after the zeroth generation is given byN=N₀ (Kⁿ⁺¹ - 1 / K-1)
Using the formula N = N₀ (Kⁿ⁺¹ - 1 / K-1), we can determine the cumulative total of fissions up to the n th generation.
The cumulative total of fissions N that have occurred up to and including the n th generation after the zeroth generation can be calculated using the formula N = N₀ (Kⁿ⁺¹ - 1 / K-1). Here's a step-by-step explanation:
1. The zeroth generation consists of N₀ fissions.
2. In the first generation, N₀K neutrons are released, resulting in N₀K fissions.
3. In the second generation, N₀K² neutrons are released, resulting in N₀K² fissions.
4. This process continues until the n th generation.
5. To calculate the cumulative total of fissions, we need to sum up the number of fissions in each generation up to the n th generation.
6. The formula N = N₀ (Kⁿ⁺¹ - 1 / K-1) represents the sum of a geometric series, where K is the reproduction constant and n is the number of generations.
7. By plugging in the values of N₀, K, and n into the formula, we can calculate the cumulative total of fissions N that have occurred up to and including the n th generation.
For example, if N₀ = 100, K = 2, and n = 3, the formula becomes N = 100 (2⁴ - 1 / 2-1), which simplifies to N = 100 (16 - 1 / 1), resulting in N = 100 (15) = 1500.
So, using the formula N = N₀ (Kⁿ⁺¹ - 1 / K-1), we can determine the cumulative total of fissions up to the n th generation.
to learn more about fissions
https://brainly.com/question/82412
#SPJ11
A bar magnet is suspended from its center in the east-to-west direction (its north pole on the east and south pole on the west) in a magnetic field that points from north to south. Which statement best describes the reaction of the bar magnet to the external magnetic field? The bar magnet will do nothing The bar magnet will move as a whole toward the north, keeping its east-west orientation The bar magnet will move as a whole toward the south, keeping its east-west orientation The bar magnet will not move overall but rotate until the north pole of the bar magnet points north The bar magnet will not move overall but rotate until the north pole of the bar magnet points south The bar magnet will move as a whole to the north as it rotates until the north pole of the bar magnet points north The bar magnet will move as a whole to the north as it rotates until the north pole of the bar magnet points south The bar magnet will move as a whole to the south as it rotates until the north pole of the bar magnet points north The bar magnet will move as a whole to the north as it rotates until the south pole of the bar magnet points south
When a bar magnet is suspended from its center in the east-to-west direction in a magnetic field that points from north to south, the bar magnet moves towards the north as a whole while rotating until the north pole of the bar magnet points north.
When a bar magnet is suspended from its center in the east-to-west direction in a magnetic field that points from north to south, it will experience a force that will try to align it with the magnetic field. Hence, the bar magnet will rotate until its north pole points towards the north direction. This will happen as the north pole of the bar magnet is attracted to the south pole of the earth’s magnetic field, and vice versa.
Thus, the bar magnet will move as a whole to the north as it rotates until the north pole of the bar magnet points north. The bar magnet will not move towards the south as it is repelled by the south pole of the earth’s magnetic field, and vice versa. Therefore, options A, B, C, D, E, F, H, and I are incorrect.
Learn more about magnetic field here:
https://brainly.com/question/19542022
#SPJ11