A 306-kg car moving at 16.5 m/s hits from behind a 810-kg car moving at 13.2 m/s in the same direction. If the new speed of the heavier car is 17.5 m/s, what is the velocity of the lighter car after the collision, assuming that any unbalanced forces on the system are negligibly small?

Answers

Answer 1

Answer:

v₂f = 5.1 m/s

Explanation:

Assuming no external forces acting during the collision, total momentum must be conserved.⇒ p₀ = pfThe initial momentum p₀, can be written as follows:

       [tex]p_{o} = m_{1} *v_{1o} + m_{2} *v_{2o} (1)[/tex]

       where m₁ = 306 kg, m₂ = 810 kg, v₁₀ = 16.5 m/s, v₂₀ = 13.2 m/s

The final momentum, pf, can be written as follows:

        [tex]p_{f} = m_{1} *v_{1f} + m_{2} *v_{2f} (2)[/tex]

        where v₂f = 17.5 m/s

Since p₀ = pf, which means that (1) is equal to (2),Replacing by the givens, and rearranging, we can solve for the only unknown that still remains, v₁f, as follows:

        [tex]v_{1f} = v_{1o} +\frac{m_{2} }{m_{1}} * (v_{2o} - v_{2f} ) \\= 16.5 m/s + \frac{810}{306} * (13.2 m/s - 17.5 m/s) \\= 16.5 m/s + \frac{810}{306} * (-4.3 m/s) \\= 16.5 m/s -11.4 m/s = 5.1 m/s[/tex]

The velocity of the lighter car after the collision is 5.1 m/s.

Related Questions

NEED HELP ASP
WILL GIVE POINTS OR WHATEVER

Answers

Answer:

you need to multiply the momentum and the mass

One atomic mass unit is defined as 1.66 x 10^-27 kg. If a proton has a mass of one atomic mass unit and a density of approximately 5.8 x 10^27 kg/m3^ . What is the diameter of a proton if we assume it is a sphere?

Answers

Answer:

The diameter is [tex]d = 8.18*10^{-19} \ m[/tex]

Explanation:

From the question we are told that

   The value of one atomic mass unit is [tex]u = 1.66 *10^{-27} \ kg[/tex]

    The density of the proton is  [tex]\rho = 5.8 *10^{27} \ kg/m^3[/tex]

Generally the volume of the proton (sphere)is mathematically represented as

     [tex]V = \frac{4}{3} * \pi * r^3[/tex]

Generally this volume can also be evaluated as

      [tex]V = \frac{u}{\rho}[/tex]

=>   [tex]V = \frac{1.66 *10^{-27}}{5.8*10^{27}}[/tex]  

=>   [tex]V = 2.862 *10^{-55} \ m^3[/tex]

So

[tex]2.862 *10^{-55} = \frac{4}{3} * 3.142 * r^3[/tex]

=>   [tex]r^3 = 6.832 *10^{-56}[/tex]

=>  [tex]r = 4.088 *10^{-19} \ m[/tex]

Now the diameter is mathematically represented as

    [tex]d = 2 * r[/tex]

=> [tex]d = 2 * 4.088 *10^{-19}[/tex]

=> [tex]d = 8.18*10^{-19} \ m[/tex]

Why are continental rocks much older than oceanic crust?
A. Oceanic crust is continually recycled through convection in the earth's mantle
B. Oceanic crust is made out of much less dense material than continental crust
C. Continental crust is continually renewed through convection in the earth's mantle
D. Continental crust eats oceanic crust for breakfast

Answers

Answer:

A. Oceanic crust is continually recycled through convection in the earth's mantle

Explanation:

The oceanic plate is constantly being recycled through the forces of convection within the earth's mantle.

New oceanic plate are formed mid-oceanic ridge for example. As the magma cools and solidifies, they are moved away continually.

This is not the case for the continental curst.

An automobile traveling 88.0 km/h has tires of 72.0 cm diameter. (a) What is the angular speed of the tires about their axles

Answers

Answer:

angular speed = 67.91 rad/s

Explanation:

Given that,

The diameter of a tire, d = 72 cm

The radius of a tire, r = 36 cm = 0.36 m

Linear speed of an automobile, v = 88 km/h = 24.45 m/s

We need to find the angular speed of the tires about their axles. The relation between angular speed and angular speed is given by :

[tex]v=r\omega\\\\\omega=\dfrac{v}{r}\\\\\omega=\dfrac{24.45 }{0.36}\\\\\omega=67.91\ rad/s[/tex]

So, the angular speed of the tire is 67.91 rad/s.

What famous equation describes the energy of stars?

Answers

Answer:

E=mc2

Explanation:

It explains that in their interiors, atoms fuse together, creating energy.

To solve this we must be knowing each and every concept related to energy and its different types. Therefore, the famous equation that describes the energy of stars is E=mc².

What is energy?

In physics, energy is the capacity to accomplish work. It can be potential, kinetic, thermal, electric, chemical, radioactive, or in other forms.

There is also heat and work—energy inside the process of being transferred by one body to the other. Energy is always classified according to its type once it has been transmitted. As a result, heat transported could become thermal energy, whereas labor done may emerge as mechanical energy. The famous equation that describes the energy of stars is E=mc²

Therefore, the famous equation that describes the energy of stars is E=mc².

To know more about energy, here:

https://brainly.com/question/29763772

#SPJ2

What do you do abt onion eyes (MY EYES ARE BURNING BADDD)

Answers

Answer:

Leave onions in cold water for about 15 minutes! Takes out the chemical reaction in the onion's defense system.

Explanation:

This is what people NEED to know for cooking... Lol :)

Suppose that the space shuttle Columbia accelerates at 14.0 m/s2 for 8.50 minutes after takeoff.
A. What will be the speed of the shuttle at the end of 8.50 minutes?
B. How far will the shuttle have traveled during this time?

Answers

Answer:

A. speed = 7.14 Km/s

B. distance = 1820.7 Km

Explanation:

Given that: a = 14.0 m/[tex]s^{2}[/tex], t = 8.50 minutes.

But,

t = 8.50 = 8.50 x 60

  = 510 seconds

A. By applying the first equation of motion, the speed of the shuttle at the end of 8.50 minutes can be determined by;

v = u + at

where: v is the final velocity, u is the initial velocity, a is the acceleration and t is the time.

u = 0

So that,

v = 14 x 510

 = 7140 m/s

The speed of the shuttle at the end of 8.50 minute is 7.14 Km/s.

B. the distance traveled can be determined by applying second equation of motion.

s = ut + [tex]\frac{1}{2}[/tex]a[tex]t^{2}[/tex]

where: s is the distance, u is the initial velocity, a is the acceleration and t is the time.

u = 0

s = [tex]\frac{1}{2}[/tex]a[tex]t^{2}[/tex]

  = [tex]\frac{1}{2}[/tex] x 14 x [tex](510)^{2}[/tex]

 = 7 x 260100

 = 1820700 m

The distance that the shuttle has traveled during the given time is  1820.7 Km.

Which state of matter does this model represent?

Image of particles tightly packed

Solid
Liquid
Gas
Plasma

Answers

Answer:

gas

Explanation:

it is gas because the particles are floating up none of the above would be floating up.

Answer:

Solid

Explanation:

A: Solid- Solids have the particles tightly packed. They have a definite shape and volume

B: Liquid- Liquids have particles not to tightly packed but kind of loose. They have an indefinite shape but a definite volume

C: Gas- Gas has particles freely all around. Indefinite shape and volume

D: Plasma- Plasma is different and should be explained with an example; think of lighting....

Since the image shows tightly packed particles, it is clear the answer is a solid.

Bru challenge with the physics.

Answers

I don’t like school :(

Answer:

WHATATATATTAT

Explanation:


Electricity is produced in a hydroelectric plant when moving water turns a turbine.
Which describes this energy transformation from the turning turbine to electricity?
A
kinetic energy into electric energy
B
nuclear energy into electrical energy
С
thermal energy into electric energy
chemical energy into electric energy

Answers

Answer:

It involves both energy transformation and energy transfer.

Explanation:

In the hydroelectric power plant, the energy is transformed from kinetic energy to electricity. Therefore, option (A) is correct.

How is the energy transformed in the hydroelectric power plant?

In the hydroelectric power plant, electric energy is generated using water from a turbine. The moving water is used to propel the turbines. At first, a large amount of the flowing water is stored across the dams. The kinetic energy of moving water is stored as potential energy in the dams.

Then the stored water will fall on the turbines and rotate the turbines which causes the potential energy of water to be used to turn the turbines which is mechanical energy.

Therefore, the potential energy of water is converted into mechanical energy. Then the rotating turbines generate electricity and the mechanical energy is converted into electrical energy.

Therefore, the hydroelectric power plant converts the kinetic energy of water into electrical energy.

Learn more about the hydroelectric power plant, here:

https://brainly.com/question/2635539

#SPJ2

Two balls collide in a head-on elastic collision and rebound in opposite directions. One ball has velocity 1.2 m/s before the collision, and −2.3 m/s after. The other ball has a mass of 1.1 kg and a velocity of −4.2 m/s before the collision. (a) What is the mass of the first ball? (b) What is the velocity of the second ball after the collision?

Answers

Answer:

If two particles are involved in an elastic collision, the velocity of the second particle after collision can be expressed as: v2f=2⋅m1(m2+m1)v1i+(m2−m1)(m2+m1)v2i v 2 f = 2 ⋅ m 1 ( m 2 + m 1 ) v 1 i + ( m 2 − m 1 ) ( m 2 + m 1 ) v 2 i .

Explanation:

Mark me as brainliest and follow me

Describe the difference between simply taking measurements and doing a scientific experiment.
In 2-3 sentences

Answers

Taking measurements might be something more of planning an experiment and a guess of how the experiment might end up! While doing an experiment is watching the action that was planned to happen or guessed to happen! Was this what you were looking for? Sorry if I’m like totally off

A 1400 kg car traveling in the positive direction takes 11.0 seconds to slow from 25.0 meters per second to 12.0 meters per second. What is the average force on the car during this time?

Answers

Answer:

–1652 N. The negative sign indicate that the force is in opposite direction to car.

Explanation:

The following data were obtained from the question:

Mass (m) of car = 1400 kg

Time (t) = 11 s

Initial velocity (u) = 25 m/s

Final velocity (v) = 12 m/s

Force (F) applied on the car =?

Next, we shall determine the acceleration of the car. This can be obtained as follow:

Time (t) = 11 s

Initial velocity (u) = 25 m/s

Final velocity (v) = 12 m/s

Acceleration (a) =?

a = (v – u) /t

a = (12 – 25) /11

a = –13/11

a = –1.18 m/s²

Finally, we shall determine the force on the car as follow:

Acceleration (a) = –1.18 m/s²

Mass (m) of car = 1400 kg

Force (F) applied on the car =?

F = ma

F = 1400 × –1.18

F = –1652 N

Thus, the force on the car is –1652 N. The negative sign indicate that the force is in opposite direction to car.

write fulk form of FPS?

Answers

Answer:

Foot per second. Foot-pound-second system. Frames per second, the frequency (rate) at which consecutive images (frames) appear on a display.

Explanation:

:)

An arrow in a bow has 357 J of elastic potential energy How much Winette enere
Will the arrow have after it has been shot assuming there is no sir restoran

Answers

Answer:

357 J

Explanation:

The elastic potential energy of arrow in the stretched bow is 357 J.

The kinetic energy of the arrow after it has been shot is given by half of the product of the arrow's mass and velocity of the arrow.

Here there are no other forms of energy at play here. Only potential and kinetic energy.

As we know that in any system the energy is conserved accordingly the elastic potential energy of the arrow will be equal to the kinetic energy of the bow after it is released i.e., 357 J.

YOUR IN THE RUNNING
OF CLAIMING
YER NEXT
B R A I N L I E S T

Which statement best explains why two flowers of the same species have different colored petals?:

A. exposure to sunlight

B. expression of an inherited trait

C. expression of an acquired trait

D. photosynthesis

You will get brainliest just for trying because i could use the help.

Answers

Answer:

B

Explanation:

it could be because they have a difference in genes

If a car is able to accelerate a 500kg truck at 50m/s^2 what is the force applied by the engine on the car? Please show work

Answers

Answer:

The answer is 25,000 N

Explanation:

The force acting on an object given it's mass and acceleration can be found by using the formula

force = mass × acceleration

From the question we have

force = 500 × 50

We have the final answer as

25,000 N

Hope this helps you

Answer:

Force applied by the engine on the car = 25 kN

Explanation:

Mass (m) = 500 kg

Acceleration (a) = 50 m/s²

The force (F) is equated to the product of the mass times the acceleration.

[tex] \boxed{ \bf{F = ma}}[/tex]

By substituting values, we get:

[tex] \longrightarrow [/tex] F = 500 × 50

[tex] \longrightarrow [/tex] F = 25000 N

[tex] \longrightarrow [/tex] F = 25 kN

What is the difference in
momentum between a 0.216 kg bird
flying 5.87 m/s and a 7.29 kg baby
crawling 0.234 m/s?

Answers

Answer:

0.438kg/ms-¹

Explanation:

Momentum, denoted by p, can be calculated by using the formula;

p = mv

Where;

m = mass (kg)

v = velocity (m/s)

Momentum (p) of bird = 0.216 kg × 5.87 m/s = 1.268kg/ms-¹

Momentum (p) of crawling baby = 7.29 kg kg × 0.234 m/s = 1.706kg/ms-¹

Having calculated the momentum of the bird to be 1.268kg/ms-¹, and the momentum of the baby to be 1.706kg/ms-¹, the difference in momentum between the flying bird and the crawling baby is:

{1.706kg/ms-¹ - 1.268kg/ms-¹} = 0.438kg/ms-¹

If you can run 10.43 m in 14.22 s. How fast are you running?

Answers

Answer:

I am 15th in my state for 55m hurdles with a time of 10.4 seconds

Explanation:

BAM

Answer: 44 m per minute

Explanation:

A student made a model of an onion skin cell she viewed using a microscope. The scale is 500:1. The student's cell model has a length of 15 cm. How many centimeters is the cells length

Answers

I feel like I'm in a city

Answer:

0.03 cm

Explanation: If the scale is 500:1, you have to divide 500 by 15 to get 0.03. You do not multiply 500 times 15 because the cells are smaller than the scale representation so you divide.

Doing specific exercises to improve a particular skill or type of health fitness is called training? True or false

Answers

the statement is true


MULTIPLE CHOICE
Newton’s first law of motion is also known as the law of ______ while the Newton’s 2nd law of motion is known as the law of _____ and Newton’s third law is also known as the law of ______

Answers

Answer:

1st law known as low of inertial

2nd law of acelaration and force relationship

3rd law of action and reaction

You perform an experiment to test how far a cannon will shoot a performer at
different angles. The data are shown below.
Angle
Distance (feet)
30°
110
34°
120
38°
128
42°
133
46°
127
50°
119
54°
109
At which angle will the performer travel the shortest distance?
A. 44°
B. 54
Ο Ο Ο Ο
C. 32
D. 50°

Answers

Answer:

128

Explanation:

Answer:

54 degrees

Explanation:

Which kind of wave interaction is shown?

Answers

Answer:

where?

Explanation:

ill edit my answer when see it

What kind of food would you expect a turtle with a hard, sharp beak and short neck to eat?

Answers

Ummmmmmmmmmm earthworms, grubs , snails , beetle and caterpillars
Leaves, grass, bugs, worms,

If you can answer my last post ill give you 75 points pls its very important and please make sure it correct!!!!!!!

Answers

Answer:

I can't see the post :/

Explanation:

Answer:

ok

Explanation:

ok how many points is this?????

When scientists make models of dynamic physical events, they will normally choose to have values that may change as time progresses. What are these values called?

boundary conditions
initial conditions
outputs
gravity

Answers

Answer:

1. Initial conditions

2. The speed of a character at the moment of contact

3. The hardness of the sidewalk where the mug landed

4. The location where potential energy is zero

5. Aerodynamic properties

Explanation:

100%

The values that may change over time in a model are called initial conditions.

Scientists use models to represent actual conditions. A model is always a representation of real life situations and are very useful for explanatory and predictive purposes.

When scientists make models of dynamic physical events, they will normally choose to have values that may change as time progresses. These values are called initial conditions.

Learn more: https://brainly.com/question/8646601

A diffuser is an adiabatic device that decreases the kinetic energy of the fluid by slowing it down. What happens to this lost kinetic energy?

Answers

Answer:

Kinetic energy is converted to internal energy

Explanation:

We are required to explain what happens to this decreased kinetic energy in this question.

Here is what a diffuser does, this device increases the pressure of a fluid and in so doing it slows it down. The lost kinetic energy would then be converted to internal energy. This is the correct answer to the question.

Thank you

a steel is 40cm long at 20c.the coefficient of linear expansivity for steel is 0.000012.find the increase in length at 70C

Answers

Answer:

janakajnakanabjjiaj yav good day for you to everyone else to do with my family is it just doesn't want me and I am

PLS HURRY!!!! 15 PTS!!! The pictures represent three different states of matter.
Which order of pictures places molecules with the most
amount of motion to the least amount of motion?
O X Y Z
O ZYX
O Y Z
O Y - X - Z

Answers

Xyz I think!
I’m so sorry if I’m wrong!!!
Other Questions
why did the French want to come to North America 10. The expression 4 (2x-5)+7(x+2) can be written in simplest form as(1) 11x-10(3) 15x - 6(2) 13x -3(4) 16x + 7 1. Place the molecules in the list in order with the smallest molecules at the top and the largest molecules at the bottom. = glucose molecule= starch molecule= protein molecule= carbon dioxide molecule= water molecule= amino acid molecule= oxygen molecule What is the value of 9 + 21 (13 + 5)?287395387540 Can someone please please help me. ????? 5Subtract 27 from 431421 Work out what x = Please and explication An art teacher needs to cut out squares of paper for an art project from a left-over sheet of paper measuring 72 x 104 inches. What size would the biggest possible square be with sides of whole number length? What is the unit price of a 2 1/2 pound turkey for $6.25 How many milliliters of a 3.4 M NaCl solution would be needed to prepare each solution?a. 45 mL of a 0.10 M solution: mLb. 330 mL of a 0.074 M solution: mL Cerrado meansO openO closedO lostO found There are thousands of downloadable digital images online that you can use in your presentations. {TRUE or FALSE}this is for speech Please answer for a and b If we know that 5 cups of flour is used to make 20 biscuits, how many biscuits are made with 15 cups of flour? Please hurry i really need it fastThe answers are hereIn which figure does Colin do work? A. Figure A B. Figure B C. Both figures D. Neither figure *15 points* any help would be appreciated plz Based on discovered evidence, in what part of the world were the earliest human settlements located?A.ChinaB.the LevantC.MesoamericaD.Central EuropePlease select the best answer from the choices providedABCD Simplify (6^-8)^4 Please help In ABC the measure of the largest angle 32 less than 3 time the smallest angle the measure of the middle angle is 8 more than half the measure of the largest angle . What is the measure of the middle angle? Governments can cause the supply of a good to increase by:A. lowering taxes on the good,B. creating new regulations on the good.C. warning companies that the good is dangerous.D. raising taxes on the good.SUBMIT