A 2.75-kN tensile load is applied to a test coupon made from 1.6-mm flat steel plate (E = 200 GPa, ν = 0.30). Determine the resulting change in (a) the 50-mm gage length, (b) the width of portion AB of the test coupon, (c) the thickness of portion AB, (d) the cross- sectional area of portion AB.
Answers
Answer:
I have attached the diagram for this question below. Consult it for better understanding.
Find the cross sectional area AB:
A = (1.6mm)(12mm) = 19.2 mm² = 19.2 × 10⁻⁶m
Forces is given by:
F = 2.75 × 10³ N
Horizontal Stress can be found by:
σ (x) = F/A
σ (x) = 2.75 × 10³ / 19.2 × 10⁻⁶m
σ (x) = 143.23 × 10⁶ Pa
Horizontal Strain can be found by:
ε (x) = σ (x)/ E
ε (x) = 143.23 × 10⁶ / 200 × 10⁹
ε (x) = 716.15 × 10⁻⁶
Find Vertical Strain:
ε (y) = -v · ε (y)
ε (y) = -(0.3)(716.15 × 10⁻⁶)
ε (y) = -214.84 × 10⁻⁶
PART (a)For L = 0.05m
Change (x) = L · ε (x)
Change (x) = 35.808 × 10⁻⁶m
PART (b)
For W = 0.012m
Change (y) = W · ε (y)
Change (y) = -2.5781 × 10⁻⁶m
PART(c)
For t= 0.0016m
Change (z) = t · ε (z)
where
ε (z) = ε (y) ,so
Change (z) = t · ε (y)
Change (z) = -343.74 × 10⁻⁹m
PART (d)
A = A(final) - A(initial)
A = -8.25 × 10⁻⁹m²
(Consult second picture given below for understanding how to calculate area)
The resulting change in the 50-mm gauge length; the width of portion AB of the test coupon; the thickness of portion AB; the cross- sectional area of portion AB are respectively; Δx = 35.808 × 10⁻⁶ m; Δy = -2.5781 × 10⁻⁶m; Δ_z = -343.74 × 10⁻⁹m; A = -8.25 × 10⁻⁹m²
What is the stress and strain in the plate?Let us first find the cross sectional area of AB from the image attached;
A = (1.6mm)(12mm) = 19.2 mm² = 19.2 × 10⁻⁶m
We are given;
Tensile Load; F = 2.75 kN = 2.75 × 10³ N
Horizontal Stress is calculated from the formula;
σₓ = F/A
σₓ = (2.75 × 10³)/(19.2 × 10⁻⁶)m
σₓ = 143.23 × 10⁶ Pa
Horizontal Strain is calculated from;
εₓ = σₓ/E
We are given E = 200 GPa = 200 × 10⁹ Pa
Thus;
εₓ = (143.23 × 10⁶)/(200 × 10⁹)
εₓ = 716.15 × 10⁻⁶
Formula for Vertical Strain is;
ε_y = -ν * εₓ
We are given ν = 0.30. Thus;
ε_y = -(0.3) * (716.15 × 10⁻⁶)
ε_y = -214.84 × 10⁻⁶
A) We are given;
Gauge Length; L = 0.05m
Change in gauge length is gotten from;
Δx = L * εₓ
Δx = 0.05 × 716.15 × 10⁻⁶
Δx = 35.808 × 10⁻⁶ m
B) From the attached diagram, the width is;
W = 0.012m
Change in width is;
Δy = W * ε_y
Δy = 0.012 * -214.84 × 10⁻⁶
Δy = -2.5781 × 10⁻⁶m
C) We are given;
Thickness of plate; t = 1.6 mm = 0.0016m
Change in thickness;
Δ_z = t * ε_z
where;
ε_z = ε_y
Thus;
Δ_z = t * ε_y
Δ_z = 0.0016 * -214.84 × 10⁻⁶
Δ_z = -343.74 × 10⁻⁹m
D) The change in cross sectional area is gotten from;
ΔA = A_final - A_initial
From calculating the areas, we have;
A = -8.25 × 10⁻⁹ m²
Read more about stress and strain in steel plates at; https://brainly.com/question/1591712
Related Questions
Find the function f and the value of the constant a such that: 2 ∫ f(t)dt x a = 2 cos x − 1
Answers
Answer:
The function is [tex]-\sin x[/tex] and the constant of integration is [tex]C = - 1[/tex].
Explanation:
The resultant expression is equal to the sum of a constant multiplied by the integral of a given function and an integration constant. That is:
[tex]a = k\cdot \int\limits {f(x)} \, dx + C[/tex]
Where:
[tex]k[/tex] - Constant, dimensionless.
[tex]C[/tex] - Integration constant, dimensionless.
By comparing terms, [tex]k = 2[/tex], [tex]C = -1[/tex] and [tex]\int {f(x)} \, dx = \cos x[/tex]. Then, [tex]f(x)[/tex] is determined by deriving the cosine function:
[tex]f(x) = \frac{d}{dx} (\cos x)[/tex]
[tex]f(x) = -\sin x[/tex]
The function is [tex]-\sin x[/tex] and the constant of integration is [tex]C = - 1[/tex].
With a very precise volumetric measuring device, the volume of a liquid sample is determined to be 6.321 L (liters). Three students are asked to determine the volume of the same liquid sample using a less precise measuring instrument. How do you evaluate the following work of each student with regards to precision, and accuracy
Students
Trials A B C
1 6.35L 6.31L 6.38L
2 6.32L 6.31 L 6.32L
3 6.33L 6.32L 6.36L
4 6.36L 6.35L 6.36L
Answers
Answer:
See explanation
Explanation:
Solution:-
- Three students measure the volume of a liquid sample which is 6.321 L.
- Each student measured the liquid sample 4 times. The data is provided for each measurement taken by each student as follows:
Students
Trial A B C
1 6.35 6.31 6.38
2 6.32 6.31 6.32
3 6.33 6.32 6.36
4 6.36 6.35 6.36
- We will define the two terms stated in the question " precision " and "accuracy"
- Precision refers to how close the values are to the sample mean. The dense cluster of data is termed to be more precise. We will use the knowledge of statistics and determine the sample standard deviation for each student.
- The mean measurement taken by each student would be as follows:
[tex]E ( A ) = \frac{6.35 +6.32+6.33+6.36}{4} \\\\E ( A ) = 6.34\\\\E ( B ) = \frac{6.31 +6.31+6.32+6.35}{4} \\\\E ( B ) = 6.3225\\\\E ( C ) = \frac{6.38 +6.32+6.36+6.36}{4} \\\\E ( C ) = 6.355\\[/tex]
- The precision can be quantize in terms of variance or standard deviation of data. Therefore, we will calculate the variance of each data:
[tex]Var ( A ) = \frac{6.35^2+6.32^2+6.33^2+6.36^2}{4} - 6.34^2\\\\Var ( A ) = 0.00025\\\\Var ( B ) = \frac{6.31^2+6.31^2+6.32^2+6.35^2}{4} - 6.3225^2\\\\Var ( B ) = 0.00026875\\\\Var ( C ) = \frac{6.38^2+6.32^2+6.36^2+6.36^2}{4} - 6.355^2\\\\Var ( C ) = 0.000475\\[/tex]
- We will rank each student sample data in term sof precision by using the values of variance. The smallest spread or variance corresponds to highest precision. So we have:
Var ( A ) < Var ( B ) < Var ( C )
most precise Least precise
- Accuracy refers to how close the sample mean is to the actual data value. Where the actual volume of the liquid specimen was given to be 6.321 L. We will evaluate the percentage difference of sample values obtained by each student .
[tex]P ( A ) = \frac{6.34-6.321}{6.321}*100= 0.30058\\\\P ( B ) = \frac{6.3225-6.321}{6.321}*100= 0.02373\\\\P ( C ) = \frac{6.355-6.321}{6.321}*100= 0.53788\\[/tex]
- Now we will rank the sample means values obtained by each student relative to the actual value of the volume of liquid specimen with the help of percentage difference calculated above. The least percentage difference corresponds to the highest accuracy as follows:
P ( B ) < P ( A ) < P ( C )
most accurate least accurate
9. A Co has 500,000 total shares outstanding and each share is priced at 20$. B Co has 300,000 total shares outstanding and each share is priced at 40$. You have 100 shares in A Co and 200 shares in B Cos. After consolidation how many new shares you will own in consolidated AB Co?
Answers
Answer:
In consolidated AB Co 300 shares.
Explanation:
Consolidation is a process in which two different organizations are united. In this question A Co and B Co are consolidated and a new Co names AB Co is formed. The shares of both the companies will be combined and their total share capital will be increased.
a surveyor is trying to find the height of a hill . he/she takes a sight on the top of the hill and find that the angle of elevation is 40°. he/she move a distance of 150 metres on level ground directly away from the hill and take a second sight. from this point the angl.e of elevation is 22°. find the height of the
hill
Answers
Answer:
height ≈ 60.60 m
Explanation:
The surveyor is trying to find the height of the hill . He takes a sight on the top of the hill and finds the angle of elevation is 40°. The distance from the hill where he measured the angle of elevation of 40° is not known.
Now he moves 150 m on level ground directly away from the hill and take a second sight from this point and measures the angle of elevation as 22°. This illustration forms a right angle triangle. The opposite side of the triangle is the height of the hill. The adjacent side of the triangle which is 150 m is the distance on level ground directly away from the hill.
Using tangential ratio,
tan 22° = opposite/adjacent
tan 22° = h/150
h = 150 × tan 22°
h = 150 × 0.40402622583
h = 60.6039338753
height ≈ 60.60 m
A very large thin plate is centered in a gap of width 0.06 m with a different oils of unknown viscosities above and below; one viscosity is twice the other. When the plate is pulled at a velocity of 0.3 m/s, the resulting force on one square meter of plate due to the viscous shear on both sides is 29 N. Assuming viscous flow and neglecting all end effects calculate the viscosities of the oils.
Answers
Answer:
The viscosities of the oils are 0.967 Pa.s and 1.933 Pa.s
Explanation:
Assuming the two oils are Newtonian fluids.
From Newton's law of viscosity for Newtonian fluids, we know that the shear stress is proportional to the velocity gradient with the viscosity serving as the constant of proportionality.
τ = μ (∂v/∂y)
There are oils above and below the plate, so we can write this expression for the both cases.
τ₁ = μ₁ (∂v/∂y)
τ₂ = μ₂ (∂v/∂y)
dv = 0.3 m/s
dy = (0.06/2) = 0.03 m (the plate is centered in a gap of width 0.06 m)
τ₁ = μ₁ (0.3/0.03) = 10μ₁
τ₂ = μ₂ (0.3/0.03) = 10μ₂
But the shear stress on the plate is given as 29 N per square meter.
τ = 29 N/m²
But this stress is a sum of stress due to both shear stress above and below the plate
τ = τ₁ + τ₂ = 10μ₁ + 10μ₂ = 29
But it is also given that one viscosity is twice the other
μ₁ = 2μ₂
10μ₁ + 10μ₂ = 29
10(2μ₂) + 10μ₂ = 29
30μ₂ = 29
μ₂ = (29/30) = 0.967 Pa.s
μ₁ = 2μ₂ = 2 × 0.967 = 1.933 Pa.s
Hope this Helps!!!
Mathematical modeling aids in technological design by simulating how.
1. A solution should be designed
2. A proposed system might behave
3. Physical models should be built
4. Designs should be used
Answers
Mathematical modeling aids in technological design by simulating how proposed system might behave. The correct option is 2.
What is mathematical modelling?Mathematical modelling describes a real world problem in mathematical terms or in the form of equations. This makes an engineer to discover new features about the problem and designer to alter his design for better function and output.
Mathematical models allow engineers and designers to understand how the proposed model and actual prototype will be produced.
Thus, the correct option is 2.
Learn more about mathematical modelling
https://brainly.com/question/731147
#SPJ2
The velocity field of a flow is given by V = 2x2 ti +[4y(t - 1) + 2x2 t]j m/s, where x and y are in meters and t is in seconds. For fluid particles on the x-axis, determine the speed and direction of flow
Answers
Answer:
Explanation:
The value of a will be zero as it is provided that the particle is on the x-axis.
Calculate the velocity of particles along x-axis.
[tex]{\bf{V}} = 2{x^2}t{\bf{\hat i}} + [4y(t - 1) + 2{x^2}t]{\bf{\hat j}}{\rm{ m/s}}[/tex]
Substitute 0 for y.
[tex]\begin{array}{c}\\{\bf{V}} = 2{x^2}t{\bf{\hat i}} + \left( {4\left( 0 \right)\left( {t - 1} \right) + 2{x^2}t} \right){\bf{\hat j}}{\rm{ m/s}}\\\\ = 2{x^2}t{\bf{\hat i}} + 2{x^2}t{\bf{\hat j}}{\rm{ m/s}}\\\end{array}[/tex]
Here,
[tex]A = 2{x^2}t \ \ and\ \ B = 2{x^2}t[/tex]
Calculate the magnitude of vector V .
[tex].\left| {\bf{V}} \right| = \sqrt {{A^2} + {B^2}}[/tex]
Substitute
[tex]2{x^2}t \ \ for\ A\ and\ 2{x^2}t \ \ for \ B.[/tex]
[tex]\begin{array}{c}\\\left| {\bf{V}} \right| = \sqrt {{{\left( {2{x^2}t} \right)}^2} + {{\left( {2{x^2}t} \right)}^2}} \\\\ = \left( {2\sqrt 2 } \right){x^2}t\\\end{array}[/tex]
The velocity of the fluid particles on the x-axis is [tex]\left( {2\sqrt 2 } \right){x^2}t{\rm{ m/s}}[/tex]
Calculate the direction of flow.
[tex]\theta = {\tan ^{ - 1}}\left( {\frac{B}{A}} )[/tex]
Here, θ is the flow from positive x-axis in a counterclockwise direction.
Substitute [tex]2{x^2}t[/tex] as A and [tex]2{x^2}t[/tex] as B.
[tex]\begin{array}{c}\\\theta = {\tan ^{ - 1}}\left( {\frac{{2{x^2}t}}{{2{x^2}t}}} \right)\\\\ = {\tan ^{ - 1}}\left( 1 \right)\\\\ = 45^\circ \\\end{array}[/tex]
The direction of flow is [tex]45^\circ[/tex] from the positive x-axis.
An airplane flies from San Francisco to Washington DC at an air speed of 800 km/hr. Assume Washington is due east of San Francisco at a distance of 6000 km. Use a Cartesian system of coordinates centered at San Francisco with Washington in the positive x-direction. At cruising altitude, there is a cross wind blowing from north to south of 100 km/hr.
Required:
a. What must be the direction of flight for the plane to actually arrive in Washington?
b. What is the speed in the San Francisco to Washington direction?
c. How long does it take to cover this distance?
d. What is the time difference compared to no crosswind?
Answers
Answer:
A.) 7.13 degree north east
B.) 806.23 km/h
C.) 7.44 hours
D.) 0.06 hours
Explanation:
Assume Washington is due east of San Francisco and Francisco with Washington in the positive x-direction
Also, the cross wind is blowing from north to south of 100 km/hr in y coordinate direction.
A.) Using Cartesian system of coordinates, the direction of flight for the plane to actually arrive in Washington can be calculated by using the formula
Tan Ø = y/x
Substitute y = 100 km/h and x = 800km/h
Tan Ø = 100/800
Tan Ø = 0.125
Ø = Tan^-1(0. 125)
Ø = 7.13 degrees north east.
Therefore, the direction of flight for the plane to actually arrive in Washington is 7.13 degree north east
B.) The speed in the San Francisco to Washington direction can be achieved by using pythagorean theorem
Speed = sqrt ( 800^2 + 100^2)
Speed = sqrt (650000)
Speed = 806.23 km/h
C.) Let us use the speed formula
Speed = distance / time
Substitute the speed and distance into the formula
806.23 = 6000/ time
Make Time the subject of formula
Time = 6000/806.23
Time = 7.44 hours
D.) If there is no cross wind,
Time = 6000/800
Time = 7.5 hour
Time difference = 7.5 - 7.44
Time difference = 0.06 hours
Technician A say's that The most two-stroke engines have a pressure type lubrication system. Technician be says that four stroke engines do not require the mixing of oil with gasoline
Answers
Question:Technician A say's that The most two-stroke engines have a pressure type lubrication system. Technician be says that four stroke engines do not require the mixing of oil with gasoline . Which of them is correct ?
Answer: Technician B is correct
Explanation: Two types of engines exist , the two stroke (example, used in chainsaws) is a type of engine that uses two strokes--a compression stroke and a return stroke to produce power in a crankshaft combustion cycle and the four stroke engines(eg lawnmowers) which uses four strokes, 2-strokes during compression and exhaustion accompanied by 2 return strokes for each of the initial process to produce power in a combustion cycle.
While a 2 stroke system engine, requires mixing of oil and fuel to the crankshaft before forcing the mixture into the cylinder and do not require a pressurized system. The 4 stroke system uses a splash and pressurized system where oil is not mixed with gasoline but drawn from the sump and directed to the main moving parts of crankshaft through its channels.
We can therefore say that Technician A is wrong while Technician B is correct
You want to plate a steel part having a surface area of 160 with a 0.002--thick layer of lead. The atomic mass of lead is 207.19 . The density of lead is 11.36 . How many atoms of lead are required
Answers
Answer:
To answer this question we assumed that the area units and the thickness units are given in inches.
The number of atoms of lead required is 1.73x10²³.
Explanation:
To find the number of atoms of lead we need to find first the volume of the plate:
[tex] V = A*t [/tex]
Where:
A: is the surface area = 160
t: is the thickness = 0.002
Assuming that the units given above are in inches we proceed to calculate the volume:
[tex]V = A*t = 160 in^{2}*0.002 in = 0.32 in^{3}*(\frac{2.54 cm}{1 in})^{3} = 5.24 cm^{3}[/tex]
Now, using the density we can find the mass:
[tex] m = d*V = 11.36 g/cm^{3}*5.24 cm^{3} = 59.5 g [/tex]
Finally, with the Avogadros number ([tex]N_{A}[/tex]) and with the atomic mass (A) we can find the number of atoms (N):
[tex] N = \frac{m*N_{A}}{A} = \frac{59.5 g*6.022 \cdot 10^{23} atoms/mol}{207.19 g/mol} = 1.73 \cdot 10^{23} atoms [/tex]
Hence, the number of atoms of lead required is 1.73x10²³.
I hope it helps you!