The height of the bunny's image on the detector is approximately 0.2425 mm.
Focal length f = 50.0 mm
Image distance i = 2.0 m = 2000 mm
Object height h = 25.0 cm = 250 mmT
We know that by the thin lens formula;`
1/f = 1/v + 1/u`
where u is the object distance and v is the image distance.
Since we are given v and f, we can find u. Then we can use the magnification formula;
`m = -v/u = y/h` to find the image height y.
By the lens formula;`
1/f = 1/v + 1/u``
1/v = 1/f - 1/u``
1/v = 1/50 - 1/2000``
1/v = (2000 - 50)/100000`
`v = 97/5 = 19.4 mm
`The image is formed at 19.4 mm behind the lens.
Now, using the magnification formula;`
m = -v/u = y/h`
`y = mh = (-v/u)h`
`y = (-19.4/2000)(250)`
y = -0.2425 mm
The negative sign indicates that the image is inverted, which is consistent with the case of an object placed beyond the focal point of a convex lens. Since the height cannot be negative, we can take the magnitude to get the final answer; Image height = |y| = 0.2425 mm
Thus, the height of the bunny's image on the detector is approximately 0.2425 mm.
Learn more about image https://brainly.com/question/14097025
#SPJ11
The location on a standing wave pattern where there is zero displacement about equilibrium (for example the string does not move).___ Choose from: Node In phase/Out of Phase Superposition Standing Wave Mode Antinode Constructive interference Destructive interference
The point on a standing wave pattern where there is zero displacement about equilibrium is called a node. A standing wave is a wave that remains in a constant position without any progressive movement.
It is a result of the interference of two waves that are identical in frequency, amplitude, and phase. The superposition principle states that the displacement of the resulting wave is the algebraic sum of the displacement of the two waves. This leads to some points of the standing wave where the displacement is maximum (called antinodes), and others where the displacement is minimum (called nodes).
The nodes are points on the standing wave pattern where the string does not move. These points correspond to points of maximum constructive or destructive interference between the two waves that form the standing wave. At a node, the displacement of the wave is zero, and the energy is stored as potential energy. The node divides the string into segments of equal length that vibrate in opposite directions.
Thus, nodes are important points on a standing wave pattern as they represent the points of minimum displacement and maximum energy storage. They play a vital role in determining the frequencies of different modes of vibration and the properties of the wave, such as wavelength, frequency, and amplitude.
Learn more about standing waves here:
https://brainly.com/question/32889249
#SPJ11
(a) A sphere made of plastic has a density of 1.14 g/cm3 and a radius of 8.00 cm. It falls through air of density 1.20 kg/m3 and has a drag coefficient of 0.500. What is its terminal speed (in m/s)?
___________m/s
(b) From what height (in m) would the sphere have to be dropped to reach this speed if it fell without air resistance?
___________m
The terminal speed of the sphere is 17.71 m/s. It would have to be dropped from a height of 86.77 m to reach this speed if it fell without air resistance.
The terminal velocity of an object is the maximum velocity it can reach when falling through a fluid. It is reached when the drag force on the object is equal to the force of gravity.
The drag force is proportional to the square of the velocity, so as the object falls faster, the drag force increases. Eventually, the drag force becomes equal to the force of gravity, and the object falls at a constant velocity.
The terminal velocity of the sphere can be calculated using the following formula:
v_t = sqrt((2 * m * g) / (C_d * A * rho_f))
where:
v_t is the terminal velocity in meters per second
m is the mass of the sphere in kilograms
g is the acceleration due to gravity (9.8 m/s^2)
C_d is the drag coefficient (0.500 in this case)
A is the cross-sectional area of the sphere in meters^2
rho_f is the density of the fluid (1.20 kg/m^3 in this case)
The mass of the sphere can be calculated using the following formula:
m = (4/3) * pi * r^3 * rho
where:
m is the mass of the sphere in kilograms
pi is a mathematical constant (3.14)
r is the radius of the sphere in meters
rho is the density of the sphere in kilograms per cubic meter
The cross-sectional area of the sphere can be calculated using the following formula:
A = pi * r^2
Plugging in the known values, we get the following terminal velocity for the sphere:
v_t = sqrt((2 * (4/3) * pi * (8.00 cm)^3 * (1.14 g/cm^3) * 9.8 m/s^2) / (0.500 * pi * (8.00 cm)^2 * 1.20 kg/m^3)) = 17.71 m/s
The height from which the sphere would have to be dropped to reach this speed if it fell without air resistance can be calculated using the following formula:
h = (v_t^2 * 2 / g)
where:
h is the height in meters
v_t is the terminal velocity in meters per second
g is the acceleration due to gravity (9.8 m/s^2)
Plugging in the known values, we get the following height:
h = (17.71 m/s)^2 * 2 / 9.8 m/s^2 = 86.77 m
To learn more about terminal speed click here: brainly.com/question/30556510
#SPJ11
Plot the electric potential (V) versus position for the following circuit on a graph that is to scale. Make sure to label the locations on your horizontal axis. Here V0=10 V and R=IkΩ What are the following values ΔVab,ΔVcd,ΔVef. ?
The problem involves plotting the electric potential (V) versus position for a circuit with given values.
The circuit consists of several locations labeled as A, B, C, D, E, and F. The voltage at point A (V0) is 10 V, and the resistance in the circuit is R = 1 kΩ. The goal is to plot the electric potential on a graph and determine the values of ΔVab, ΔVcd, and ΔVef.
To plot the electric potential versus position, we start by labeling the positions A, B, C, D, E, and F on the horizontal axis. We then calculate the potential difference (ΔV) at each location.
ΔVab is the potential difference between points A and B. Since point B is connected directly to the positive terminal of the voltage source V0, ΔVab is equal to V0, which is 10 V.
ΔVcd is the potential difference between points C and D. Since points C and D are connected by a resistor R, the potential difference across the resistor can be calculated using Ohm's Law: ΔVcd = IR, where I is the current flowing through the resistor. However, the current value is not given in the problem, so we cannot determine ΔVcd without additional information.
ΔVef is the potential difference between points E and F. Similar to ΔVcd, without knowing the current flowing through the resistor, we cannot determine ΔVef.
Therefore, we can only determine the value of ΔVab, which is 10 V, based on the given information. The values of ΔVcd and ΔVef depend on the current flowing through the resistor and additional information is needed to calculate them.
Learn more about electric potential here: brainly.com/question/28444459
#SPJ11
Displacement vector À points due east and has a magnitude of 1.49 km. Displacement vector B points due north and has a magnitude of 9.31 km. Displacement vector & points due west and has a magnitude of 6.63 km. Displacement vector # points due south and has a magnitude of 2.32 km. Find (a) the magnitude of the resultant vector À + B + © + D , and (b) its direction as a
positive angle relative to due west.
(a) The magnitude of the resultant vector À + B + & + # is approximately 8.67 km.
(b) The direction of the resultant vector, measured as a positive angle relative to due west, is approximately 128.2 degrees.
To find the magnitude and direction of the resultant vector, we can use vector addition.
Magnitude of vector À = 1.49 km (due east)
Magnitude of vector B = 9.31 km (due north)
Magnitude of vector & = 6.63 km (due west)
Magnitude of vector # = 2.32 km (due south)
(a) Magnitude of the resultant vector À + B + & + #:
To find the magnitude of the resultant vector, we can square each component, sum them, and take the square root:
Resultant magnitude = sqrt((Ax + Bx + &x + #x)^2 + (Ay + By + &y + #y)^2)
Here, Ax = 1.49 km (east), Ay = 0 km (no north/south component)
Bx = 0 km (no east/west component), By = 9.31 km (north)
&x = -6.63 km (west), &y = 0 km (no north/south component)
#x = 0 km (no east/west component), #y = -2.32 km (south)
Resultant magnitude = sqrt((1.49 km + 0 km - 6.63 km + 0 km)^2 + (0 km + 9.31 km + 0 km - 2.32 km)^2)
Resultant magnitude = sqrt((-5.14 km)^2 + (6.99 km)^2)
Resultant magnitude ≈ sqrt(26.4196 km^2 + 48.8601 km^2)
Resultant magnitude ≈ sqrt(75.2797 km^2)
Resultant magnitude ≈ 8.67 km
Therefore, the magnitude of the resultant vector À + B + & + # is approximately 8.67 km.
(b) Direction of the resultant vector:
To find the direction, we can calculate the angle with respect to due west.
Resultant angle = atan((Ay + By + &y + #y) / (Ax + Bx + &x + #x))
Resultant angle = atan((0 km + 9.31 km + 0 km - 2.32 km) / (1.49 km + 0 km - 6.63 km + 0 km))
Resultant angle = atan(6.99 km / -5.14 km)
Resultant angle ≈ -51.8 degrees
Since we are measuring the angle relative to due west, we take the positive angle, which is 180 degrees - 51.8 degrees.
Resultant angle ≈ 128.2 degrees
Therefore, the direction of the resultant vector À + B + & + #, measured as a positive angle relative to due west, is approximately 128.2 degrees.
Learn more about Displacement vectors at https://brainly.com/question/12006588
#SPJ11
How much work, in milliJoules, would it take to move a positive charge, 16.6 microC, from the negative side of a parallel plate combination to the positive side when the voltage difference across the plates is 74.97 V?
The work required to move a positive charge, 16.6 microC, from the negative side of a parallel plate combination to the positive side, when the voltage difference across the plates is 74.97 V, is approximately 1.24502 millijoules.
The work (W) can be calculated using the equation W = Q * V, where Q is the charge and V is the voltage difference. In this case, the charge is 16.6 microC (16.6 × 10^(-6) C) and the voltage difference is 74.97 V. Plugging in these values, we have:
W = (16.6 × 10^(-6) C) * (74.97 V)
Calculating this, we find:
W ≈ 1.24502 × 10^(-3) J
To convert this to millijoules, we multiply by 1000:
W ≈ 1.24502 mJ
Therefore, it would take approximately 1.24502 millijoules of work to move the positive charge, 16.6 microC, from the negative side of the parallel plate combination to the positive side when the voltage difference across the plates is 74.97 V.
To learn more about work, click here: https://brainly.com/question/18094932
#SPJ11
How do you specify the z component of an electrons total angular
momentum in units of h/2pi?
The z component of an electron's total angular momentum, denoted as Lz, can be specified in units of h/2π (Planck's constant divided by 2π) by using the formula: Lz = mℏ
where m is the quantum number representing the specific value of the z component and ℏ is h/2π (reduced Planck's constant). The quantum number m can take on integer or half-integer values (-ℓ, -ℓ+1, ..., ℓ-1, ℓ), where ℓ is the orbital angular momentum quantum number.
Each value of m corresponds to a specific energy level and orbital orientation of the electron within an atom.
To know more about angular momentum refer to-
https://brainly.com/question/29563080
#SPJ11
6. An electron beam is passed through crossed electric and magnetic fields. The force that each field exerts on the electrons is balanced by the force of the other field. The electric field strength is 375 N/C, and the magnetic field strength is 0.125 T. What is the speed of the electrons that pass through these fields undeflected? Enter your answer 7. Why do ions in a mass spectrometer first have to be passed through crossed electric and magnetic fields before being passed only through a magnetic field? Enter your answer
The speed of the electrons that pass through crossed electric and magnetic fields undeflected is 3 × 10^6 m/s.
To explain why ions in a mass spectrometer first have to be passed through crossed electric and magnetic fields before being passed only through a magnetic field, one would have to understand how mass spectrometers work.
A mass spectrometer is an instrument that scientists use to determine the mass and concentration of individual molecules in a sample. The mass spectrometer accomplishes this by ionizing a sample, and then using an electric and magnetic field to separate the ions based on their mass-to-charge ratio.
Ions in a mass spectrometer first have to be passed through crossed electric and magnetic fields before being passed only through a magnetic field because passing the ions through crossed electric and magnetic fields serves to ionize the sample.
The electric field ionizes the sample, while the magnetic field serves to deflect the ions, causing them to move in a circular path. This deflection is proportional to the mass-to-charge ratio of the ions.
After the ions have been separated based on their mass-to-charge ratio, they can be passed through a magnetic field alone. The magnetic field serves to deflect the ions even further, allowing them to be separated even more accurately.
To know more about speed of the electrons, visit:
https://brainly.com/question/31948190
#SPJ11
Calculate the velocity of a bird flying toward its nest with a mass of 0.25kg and a kinetic energy of 40.5
To calculate the velocity of the bird flying toward its nest, we need to use the formula for kinetic energy. The formula for kinetic energy is KE = 1/2 * mass * velocity^2. We are given the mass of the bird as 0.25 kg and the kinetic energy as 40.5 J. We can rearrange the formula to solve for velocity: velocity = √(2 * KE / mass).
Plugging in the given values, velocity = √(2 * 40.5 J / 0.25 kg).
Simplifying the equation, velocity = √(162 J / 0.25 kg).
Dividing 162 J by 0.25 kg, we get velocity = √(648) = 25.46 m/s.
The formula for kinetic energy is KE = 1/2 * mass * velocity^2. We are given the mass of the bird as 0.25 kg and the kinetic energy as 40.5 J.
We can rearrange the formula to solve for velocity: velocity = √(2 * KE / mass).
Plugging in the given values, velocity = √(2 * 40.5 J / 0.25 kg).
Simplifying the equation, velocity = √(162 J / 0.25 kg).
Dividing 162 J by 0.25 kg, we get velocity = √(648)
= 25.46 m/s.
Therefore, the velocity of the bird flying toward its nest is approximately 25.46 m/s.
To know more about velocity visit:
https://brainly.com/question/30559316
#SPJ11
Acircular loop of 10m diameter carries 2A current. Find the magnetic field strength at a distance of 20m along the axis of the loop. Also find the magnetic flux density in the plane of the loop as a function of distance from the center of the loop.
The magnetic flux density in the plane of the loop as a function of distance from the center is (4π × 10^-7 T·m) / ((25m² + x²)^(3/2)).
To find the magnetic field strength at a distance of 20m along the axis of the loop, we can use the formula for the magnetic field produced by a current-carrying loop at its center:
B = (μ₀ * I * N) / (2 * R),
where B is the magnetic field strength, μ₀ is the permeability of free space (4π × 10^-7 T·m/A), I is the current, N is the number of turns in the loop, and R is the radius of the loop.
Since the diameter of the loop is 10m, the radius is half of that, R = 5m. The current is given as 2A, and there is only one turn in this case, so N = 1.
Substituting these values into the formula, we have:
B = (4π × 10^-7 T·m/A * 2A * 1) / (2 * 5m) = (2π × 10^-7 T·m) / (5m) = 4π × 10^-8 T.
Therefore, the magnetic field strength at a distance of 20m along the axis of the loop is 4π × 10^-8 Tesla.
To find the magnetic flux density in the plane of the loop as a function of distance from the center, we can use the formula for the magnetic field produced by a current-carrying loop at a point on its axis:
B = (μ₀ * I * R²) / (2 * (R² + x²)^(3/2)),
where x is the distance from the center of the loop along the axis.
Substituting the given values, with R = 5m, I = 2A, and μ₀ = 4π × 10^-7 T·m/A, we have:
B = (4π × 10^-7 T·m/A * 2A * (5m)²) / (2 * ((5m)² + x²)^(3/2)).
Simplifying the equation, we find:
B = (4π × 10^-7 T·m) / ((25m² + x²)^(3/2)).
Therefore, The magnetic flux density in the plane of the loop as a function of distance from the center is (4π × 10^-7 T·m) / ((25m² + x²)^(3/2)).
Learn more about magnetic flux density here:
https://brainly.com/question/16234377
#SPJ11
A 13225 N car traveling at 42.0 km/h rounds a curve of radius 1.34×10 2 m. The acceleration of gravity is 9.81 m/s 2 . a) Find the centripetal acceleration of the car. Answer in units of m/s 2 . b) Find the force that maintains circular motion. Answer in units of N. c) Find the minimum coefficient of static friction between the tires and the road that will allow the car to round the curve safely.
a) Centripetal acceleration = 0.918 m/s²
b) Centripetal force = 1237.43 N
c) Minimum coefficient of static friction = 0.0935
a) To find the centripetal acceleration of the car, we use the formula for centripetal acceleration, a = v²/r, where v is the velocity and r is the radius of the curve. First, we need to convert the car's speed from km/h to m/s: 42.0 km/h = (42.0 × 1000 m) / (3600 s) = 11.7 m/s. Plugging the values into the formula,
we have a = (11.7 m/s)² / (1.34 × 10² m) ≈ 0.918 m/s².
b) The force that maintains circular motion is the centripetal force, which is given by F = ma, where m is the mass of the car. To find the mass, we divide the weight of the car by the acceleration due to gravity: m = 13225 N / 9.81 m/s² ≈ 1349.03 kg. Plugging in the values,
we have F = (1349.03 kg) × (0.918 m/s²) ≈ 1237.43 N.
c) The minimum coefficient of static friction, μs, can be determined by comparing the maximum static friction force, μsN, to the centripetal force. Since the car is in circular motion, the normal force N is equal to the weight of the car, 13225 N. Setting μsN = F,
we have μs(13225 N) = 1237.43 N. Solving for μs,
we find μs = 1237.43 N / 13225 N ≈ 0.0935.
Learn more About acceleration from the given link
https://brainly.com/question/460763
#SPJ11
M Two hypothetical planets of masses m₁ and m₂ and radii r₁ and r₂ , respectively, are nearly at rest when they are an infinite distance apart. Because of their gravitational attraction, they head toward each other on a collision course.(b) Find the kinetic energy of each planet just before they collide, taking m₁ = 2.00 × 10²⁴ kg, m₂ = , 8.00 × 10²⁴ kg , r₁ = 3.00× 10⁶m and r₂ = 5.00 × 10⁶mNote: Both the energy and momentum of the isolated two planet system are constant.
Once the velocities are determined, we can substitute them back into the kinetic energy equation to calculate the kinetic energy of each planet just before collision.
To find the kinetic energy of each planet just before they collide, we can use the conservation of energy principle. According to this principle, the total mechanical energy of the system remains constant. Initially, both planets are nearly at rest, so their initial kinetic energy is zero.
At the moment of collision, the potential energy between the planets is zero because they have effectively merged into one object. Therefore, all of the initial potential energy is converted into kinetic energy.
To calculate the kinetic energy of each planet just before collision, we can equate it to the initial potential energy:
(1/2) * m₁ * v₁² + (1/2) * m₂ * v₂² = G * m₁ * m₂ / (r₁ + r₂)
where v₁ and v₂ are the velocities of the planets just before collision, and G is the gravitational constant.
Given the values m₁ = 2.00 × 10²⁴ kg, m₂ = 8.00 × 10²⁴ kg, r₁ = 3.00 × 10⁶ m, r₂ = 5.00 × 10⁶ m, and G = 6.67 × 10⁻¹¹ N m²/kg², we can solve the equation to find the velocities.
Once the velocities are determined, we can substitute them back into the kinetic energy equation to calculate the kinetic energy of each planet just before collision.
to learn more about velocities
https://brainly.com/question/34025828
#SPJ11
1. The electric field in a region of space increases from 00 to 1700 N/C in 2.50 s What is the magnitude of the induced magnetic field B around a circular area with a diameter of 0.540 m oriented perpendicularly to the electric field?
b=____T
2.
Having become stranded in a remote wilderness area, you must live off the land while you wait for rescue. One morning, you attempt to spear a fish for breakfast.
You spot a fish in a shallow river. Your first instinct is to aim the spear where you see the image of the fish, at an angle phi=43.40∘ϕ=43.40∘ with respect to the vertical, as shown in the figure. However, you know from physics class that you should not throw the spear at the image of the fish, because the actual location of the fish is farther down than it appears, at a depth of H=0.9500 m.H=0.9500 m. This means you must decrease the angle at which you throw the spear. This slight decrease in the angle is represented as α in the figure.
If you throw the spear from a height ℎ=1.150 mh=1.150 m above the water, calculate the angle decrease α . Assume that the index of refraction is 1.0001.000 for air and 1.3301.330 for water.
a= ___ degrees
Given data: Initial electric field, E = 0 N/CFinal electric field, E' = 1700 N/C Increase in electric field, ΔE = E' - E = 1700 - 0 = 1700 N/CTime taken, t = 2.50 s.
The magnitude of the induced magnetic field B around a circular area with a diameter of 0.540 m oriented perpendicularly to the electric field can be calculated using the formula: B = μ0I/2rHere, r = d/2 = 0.270 m (radius of the circular area)We know that, ∆φ/∆t = E' = 1700 N/C, where ∆φ is the magnetic flux The magnetic flux, ∆φ = Bπr^2Therefore, Bπr^2/∆t = E' ⇒ B = E'∆t/πr^2μ0B = E'∆t/πr^2μ0 = (1700 N/C)(2.50 s)/(π(0.270 m)^2)(4π×10^-7 T· m/A)≈ 4.28×10^-5 T Therefore, b = 4.28 x 10^-5 T2.
In the given problem, the angle of incidence is φ = 43.40°, depth of the fish is H = 0.9500 m, and height of the thrower is h = 1.150 m. The angle decrease α needs to be calculated. Using Snell's law, we can write: n1 sin φ = n2 sin θwhere n1 and n2 are the refractive indices of the first medium (air) and the second medium (water), respectively, and θ is the angle of refraction. Using the given data, we get:sin θ = (n1 / n2) sin φ = (1.000 / 1.330) sin 43.40° ≈ 0.5234θ ≈ 31.05°From the figure, we can write:tan α = H / (h - H) = 0.9500 m / (1.150 m - 0.9500 m) = 1.9α ≈ 63.43°Therefore, the angle decrease α is approximately 63.43°.So, a = 63.43 degrees.
To know more about electric visit:
https://brainly.com/question/31173598
#SPJ11
How much charge does 5.5 billion (5,500,000,00) electrons produce? (a) -3.4x10°C (b) -8.8x10C (c)-1.0x10°C (d)-5.12x100c
The charge produced by 5.5 billion electrons is (b)-8.8x10^(-10) C.
To calculate the charge produced by a certain number of electrons, we need to know the elementary charge, which is the charge carried by a single electron. The elementary charge is approximately 1.6x10^(-19) C.
Given that we have 5.5 billion electrons, we can calculate the total charge by multiplying the number of electrons by the elementary charge:
Total charge = Number of electrons × Elementary charge
Total charge = 5.5 billion × (1.6x10^(-19) C)
Simplifying this calculation, we have:
Total charge = 5.5x10^9 × (1.6x10^(-19) C)
Multiplying these numbers together, we get:
Total charge = 8.8x10^(-10) C
Therefore, the charge produced by 5.5 billion electrons is -8.8x10^(-10) C. Option b is the answer.
To learn more about electrons click here:
brainly.com/question/12001116
#SPJ11
7. A 3 meter long wire carries a current of 5 A and is immersed within a uniform magnetic field B. When this wire lies along the +x axis (current in +x direction), a magnetic force 1 F₁ = (+9N1) acts on the wire, and when it lies on the +y axis (current in +y direction), the force is F₂ = (- 9N1). AA A Find the magnetic field B, expressing your answer in i, j, k notation.
The magnetic field B can be determined by analyzing the forces acting on the wire in different orientations. By considering the given forces and orientations, the magnetic field B is determined to be B = 3.6i - 3.6j + 0k T.
When the wire lies along the +x axis, a magnetic force F₁ = +9N₁ acts on the wire. Since the wire carries a current in the +x direction, we can use the right-hand rule to determine the direction of the magnetic field B. The force F₁ is directed in the -y direction, perpendicular to both the current and magnetic field, indicating that the magnetic field must point in the +z direction.
When the wire lies along the +y axis, a magnetic force F₂ = -9N₁ acts on the wire. Similarly, using the right-hand rule, we find that the force F₂ is directed in the -x direction. This implies that the magnetic field must be in the +z direction to satisfy the right-hand rule.
Since the magnetic field B has a z-component but no x- or y-components, we can express it as B = Bi + Bj + Bk. The forces F₁ and F₂ allow us to determine the magnitudes of the x- and y-components of B.
For the wire along the +x axis, the force F₁ is given by F₁ = qvB, where q is the charge, v is the velocity of charge carriers, and B is the magnetic field. The magnitude of F₁ is equal to qvB, and since the wire carries a current of 5 A, the magnitude of F₁ is given by 9N₁ = 5A * B, which leads to B = 1.8 N₁/A.
Similarly, for the wire along the +y axis, the force F₂ is given by F₂ = qvB, where q, v, and B are the same as before. The magnitude of F₂ is equal to qvB, and since the wire carries a current of 5 A, the magnitude of F₂ is given by 9N₁ = 5A * B, which leads to B = -1.8 N₁/A.
Combining the x- and y-components, we find that B = 1.8i - 1.8j + 0k N₁/A. Finally, since 1 T = 1 N₁/A·m, we can convert N₁/A to T and obtain the magnetic field B = 3.6i - 3.6j + 0k T.
Learn more about Magnetic Field here:
brainly.com/question/14848188
#SPJ11
An electron has a total energy of 2.13 times its rest
energy.
What is the momentum of this electron? (in keVc)
By using the relativistic energy-momentum relationship and substituting the given total energy ratio, the momentum of the electron is
pc = √(3.5369m²c⁴).
To determine the momentum of the electron, we need to use the relativistic energy-momentum relationship, which states that the total energy (E) of a particle is related to its momentum (p) and rest energy (E₀) by the equation E = √((pc)² + (E₀c²)), where c is the speed of light.
The total energy of the electron is 2.13 times its rest energy, we can write the equation as E = 2.13E₀.
Substituting this into the energy-momentum relationship, we have
2.13E₀ = √((pc)² + (E₀c²)).
Simplifying the equation, we get
(2.13E₀)² = (pc)² + (E₀c²).
Since the rest energy of an electron is E₀ = mc², where m is the electron's mass, we can rewrite the equation as (2.13mc²)² = (pc)² + (mc²)².
Expanding and rearranging, we find
(4.5369m²c⁴) - (m²c⁴) = (pc)².
Simplifying further, we get
(3.5369m²c⁴) = (pc)².
Taking the square root of both sides, we have
pc = √(3.5369m²c⁴).
Therefore, the momentum of the electron is √(3.5369m²c⁴).
To know more about momentum refer here:
https://brainly.com/question/30677308
#SPJ11
Question 43 1 pts In what form does water exist on the Moon? There is water ice in the bright regions of the lunar maria. There are shallow lakes of liquid water in the deepest craters. There are small pools of liquid water just beneath the surface. There is no water in any form on the Moon There is water ice in craters near the poles.
Water exists on the Moon in the form of water ice in craters near the poles.
Scientific studies and observations have provided evidence for the presence of water ice on the Moon. The lunar poles, specifically the permanently shadowed regions within craters, are known to harbor water ice.
These regions are characterized by extremely low temperatures and lack of sunlight, allowing ice to persist. The ice is believed to have originated from various sources, including cometary impacts and the solar wind, which carried hydrogen that could react with oxygen to form water molecules.
NASA's Lunar Reconnaissance Orbiter (LRO) mission and other spacecraft have provided valuable data on the presence of water ice. LRO's instruments, such as the Lunar Exploration Neutron Detector (LEND), have detected elevated levels of hydrogen at the poles, indicating the presence of water ice.
Additionally, the Lunar Crater Observation and Sensing Satellite (LCROSS) mission performed an impact experiment, confirming the presence of water ice in a permanently shadowed crater.
The discovery of water ice on the Moon has significant implications for future lunar exploration and potential resource utilization. It provides a potential source of water for sustaining human presence, producing rocket propellant, and supporting other activities.
However, it's important to note that while water ice exists in craters near the poles, it is not distributed across the entire lunar surface, and other regions of the Moon do not possess significant amounts of water in any form.
To know more about lunar poles refer here:
https://brainly.com/question/31037120#
#SPJ11
urgent please help
An object is being acted upon by three forces and as a result moves with a constant velocity. One force is 60.0 N along the +x-axis, and the second is 75.0 N along the +y-axis. What is the standard an
To determine the standard angle, we need to find the angle between the resultant vector (the vector sum of the three forces) and the positive x-axis.
Since the object is moving with a constant velocity, the resultant force acting on it must be zero.
Let's break down the given forces:
Force 1: 60.0 N along the +x-axis
Force 2: 75.0 N along the +y-axis
Since these two forces are perpendicular to each other (one along the x-axis and the other along the y-axis), we can use the Pythagorean theorem to find the magnitude of the resultant force.
Magnitude of the resultant force (FR) = sqrt(F1^2 + F2^2)
FR = sqrt((60.0 N)^2 + (75.0 N)^2)
FR = sqrt(3600 N^2 + 5625 N^2)
FR = sqrt(9225 N^2)
FR = 95.97 N (rounded to two decimal places)
Now, we can find the angle θ between the resultant force and the positive x-axis using trigonometry.
θ = arctan(F2 / F1)
θ = arctan(75.0 N / 60.0 N)
θ ≈ arctan(1.25)
Using a calculator, we find θ ≈ 51.34 degrees (rounded to two decimal places).
Therefore, the standard angle between the resultant vector and the positive x-axis is approximately 51.34 degrees.
Learn more about vector here: brainly.com/question/24256726
#SPJ11
Cell Membranes and Dielectrics Many cells in the body have a cell membrane whose inner and outer surfaces carry opposite charges, just like the plates of a parallel-plate capacitor. Suppose a typical cell membrane has a thickness of 8.8×10−9 m , and its inner and outer surfaces carry charge densities of -6.3×10−4 C/m2 and +6.3×10−4 C/m2 , respectively. In addition, assume that the material in the cell membrane has a dielectric constant of 5.4.
1. Find the magnitude of the electric field within the cell membrane.
E = ______ N/C
2. Calculate the potential difference between the inner and outer walls of the membrane.
|ΔV| = ______ mV
1. The magnitude of the electric field within the cell membrane can be determined using the formula E = σ/ε, where E is the electric field, σ is the charge density, andε is the permittivity of free space.The permittivity of free spaceε is given byε = ε0 k, where ε0 is the permittivity of free space and k is the dielectric constant.
Thus, the electric field within the cell membrane is given by E = σ/ε0 kE = (6.3 × 10-4 C/m2) / [8.85 × 10-12 F/m (5.4)]E = 1.51 × 106 N/C2. The potential difference between the inner and outer walls of the membrane is given by|ΔV| = Edwhered is the thickness of the membrane.Substituting values,|ΔV| = (1.51 × 106 N/C)(8.8 × 10-9 m)|ΔV| = 13.3 mV (rounded to two significant figures) Answer:1. E = 1.51 × 106 N/C2. |ΔV| = 13.3 mV
Learn more about electric field:
brainly.com/question/19878202
#SPJ11
An electron has a total energy of 2.38 times its rest energy. What is the momentum of this electron? (in) Question 5 A proton has a speed of 48 km. What is the wavelength of this proton (in units of pm)? 8
(a) The momentum of the electron is 2.16 times its rest momentum.(b) The wavelength of the proton is 8246 picometers.
(a) The momentum of an electron with a total energy of 2.38 times its rest energy:
E² = (pc)² + (mc²)²
Given that the total energy is 2.38 times the rest energy, we have:
E = 2.38mc²
(2.38mc²)² = (pc)² + (mc²)²
5.6644m²c⁴ = p²c² + m²⁴
4.6644m²c⁴ = p²c²
4.6644m²c² = p²
Taking the square root of both sides:
pc = √(4.6644m²c²)
p = √(4.6644m²c²) / c
p = √4.6644m²
p = 2.16m
The momentum of the electron is 2.16 times its rest momentum.
(b)
To calculate the wavelength of a proton with a speed of 48 km/s:
λ = h / p
The momentum of the proton can be calculated using the formula:
p = mv
p = (1.6726219 × 10⁻²⁷) × (48,000)
p = 8.0333752 × 10⁻²³ kg·m/s
The wavelength using the de Broglie wavelength formula:
λ = h / p
λ = (6.62607015 × 10⁻³⁴) / (8.0333752 × 10⁻²³ )
λ ≈ 8.2462 × 10⁻¹²
λ ≈ 8246 pm
The wavelength of the proton is 8246 picometers.
To know more about the wavelength:
https://brainly.com/question/32900586
#SPJ4
1) A blue light source is pointing at you and, intrigued by this spectral light, you walk towards it. As you start to move towards the source, the frequency of the light __________ compared to when you were stationary.
Decreases
Stays the same
Increases
Fluctuates in an unpredictable pattern
Becomes dimmer
2)An electric motor and an electric generator are essentially the same thing: a loop of wire turning in a magnetic field. The distinction between them is how the current induced in the motion is used in each system. Describe the distinction and how the induced current affects each system.
The frequency of the light increases as you move towards the blue light source. As you walk towards the blue light source, the distance between you and the source decreases.
This causes the wavelengths of the light waves to appear compressed, resulting in an increase in frequency. Since the frequency of light is directly related to its color, the light appears bluer as you approach the source. The observed increase in frequency is a result of the Doppler effect. This phenomenon occurs when there is relative motion between the source of waves and the observer. In the case of light, as the observer moves towards the source, the distance between them decreases, causing the waves to be "squeezed" together. This compression of the wavelengths leads to an increase in frequency, which corresponds to a bluer color in the case of visible light. The Doppler effect is a fundamental principle that applies to various wave phenomena and has practical applications in fields such as astronomy, meteorology, and sound engineering. It helps explain the shifts in frequency and wavelength that occur due to relative motion and provides insights into the behavior of waves in different contexts.
To learn more about frequency of the light, Click here:
https://brainly.com/question/10732947
#SPJ11
"A 4-cm high object is in front of a thin lens. The lens forms a
virtual image 12 cm high. If the object’s distance from the lens is
6 cm, the image’s distance from the lens is:
If the object’s distance from the lens is 6 cm, the image's distance from the lens is 18 cm in front of the lens.
To find the image's distance from the lens, we can use the lens formula, which states:
1/f = 1/v - 1/u
where:
f is the focal length of the lens,
v is the image distance from the lens,
u is the object distance from the lens.
Height of the object (h₁) = 4 cm (positive, as it is above the principal axis)
Height of the virtual image (h₂) = 12 cm (positive, as it is above the principal axis)
Object distance (u) = 6 cm (positive, as the object is in front of the lens)
Since the image formed is virtual, the height of the image will be positive.
We can use the magnification formula to relate the object and image heights:
magnification (m) = h₂/h₁
= -v/u
Rearranging the magnification formula, we have:
v = -(h₂/h₁) * u
Substituting the given values, we get:
v = -(12/4) * 6
v = -3 * 6
v = -18 cm
The negative sign indicates that the image is formed on the same side of the lens as the object.
Learn more about distance -
brainly.com/question/26550516
#SPJ11
Two blocks of mass m, = 5 kg and m, = 2 kg are connected by a rope that goes over a pulley and provides a tension 7. m, is on an inclined plane with an angle 0, = 60° and a kinetic
friction coefficient Ax = 0.2. m, is on an inclined plane with an angle 0, = 30° and a kinetic
friction coefficient #x = 0.2.
a. What is the acceleration of the system?
b. What is the tension of the rope?
The numerical values for the acceleration and tension are 3.52 m/s² and 20.27 N, respectively.
m1 = 5 kg
m2 = 2 kg
theta1 = 60°
theta2 = 30°
mu(k) = 0.2
g = 9.8 m/s² (acceleration due to gravity)
a) Acceleration of the system:
Using the equation:
a = (m1 * g * sin(theta1) - mu(k) * m1 * g * cos(theta1) + m2 * g * sin(theta2) + mu(k) * m2 * g * cos(theta2)) / (m1 + m2)
Substituting the values:
a = (5 * 9.8 * sin(60°) - 0.2 * 5 * 9.8 * cos(60°) + 2 * 9.8 * sin(30°) + 0.2 * 2 * 9.8 * cos(30°)) / (5 + 2)
Calculating the expression:
a ≈ 3.52 m/s²
So, the acceleration of the system is approximately 3.52 m/s².
b) Tension of the rope:
Using the equation:
T = m1 * (g * sin(theta1) - mu(k) * g * cos(theta1)) - m1 * a
Substituting the values:
T = 5 * (9.8 * sin(60°) - 0.2 * 9.8 * cos(60°)) - 5 * 3.52
Calculating the expression:
T ≈ 20.27 N
So, the tension in the rope is approximately 20.27 N.
Therefore, the numerical values for the acceleration and tension are 3.52 m/s² and 20.27 N, respectively.
Learn more about acceleration at: https://brainly.com/question/25876659
#SPJ11
Show that if a constant electric field is present along some length 1 of a current-carrying
wire with cross sectional area A, the relation V = tR can be written E = pJ, where p is
the resistivity of the wire and J is the current density in the wire.
If a constant electric field is present along a length of a current-carrying wire with cross-sectional area A
To demonstrate the relation between the constant electric field (E) and the resistivity (p) and current density (J) in a wire, we start with the definition of electric field (E) and resistivity (p).
The electric field (E) is defined as the force per unit charge experienced by a test charge placed in an electric field. Mathematically, it is given by:
E = V/L
where E is the electric field, V is the voltage across a length L of the wire, and L is the length of the wire.
The resistivity (p) of a material is a measure of its inherent resistance to current flow. It is defined as:
p = R * (A/L)
where p is the resistivity, R is the resistance of the wire, A is the cross-sectional area of the wire, and L is the length of the wire.
Now, let's express the resistance (R) in terms of the resistivity (p) and the dimensions of the wire. The resistance (R) is given by Ohm's law as:
R = V/I
where R is the resistance, V is the voltage across the wire, and I is the current flowing through the wire.
Substituting the expression for resistance (R) in terms of resistivity (p), length (L), and cross-sectional area (A), we have:
V/I = p * (L/A) * (A/L)
Canceling out the length (L) and cross-sectional area (A), we get:
V/I = p
Rearranging the equation, we find:
V = pI
Now, let's express the current (I) in terms of the current density (J) and the cross-sectional area (A) of the wire. The current density (J) is defined as the current per unit area. Mathematically, it is given by:
J = I/A
Rearranging the equation, we have:
I = J * A
Substituting this expression for the current (I) in terms of current density (J) and the cross-sectional area (A) into the equation V = pI, we get:
V = p * (J * A)
Simplifying further, we find:
V = pJ * A
Comparing this equation with the initial definition of the electric field (E = V/L), we see that E = pJ.
Therefore, we have shown that if a constant electric field is present along a length of a current-carrying wire with cross-sectional area A, the relation V = tR can be written as E = pJ, where p is the resistivity of the wire and J is the current density in the wire.
Learn more about electric field from the given link
https://brainly.com/question/14372859
#SPJ11
5Pb has a half-life of about t½ = 1.76x107 years and decays into 205Tl. There is no evidence for primordial 205Tl. (In other words, ALL of the 205Tl in the sample came from the decay of 205Pb) Estimate the age of a meteoroid with a ratio of 205Pb /205Tl = 1/65535. (Answer in scientific notation, in years, using 3 sig. figs.)
The estimated age of the meteoroid is approximately 2.13 x 10^9 years.
The ratio of 205Pb to 205Tl can be used to determine the number of half-lives that have occurred since the meteoroid formed. Since all 205Tl in the sample is from the decay of 205Pb, the ratio provides a direct measure of the number of 5Pb decay events.
The ratio of 205Pb to 205Tl is 1/65535, which means there is 1 unit of 205Pb for every 65535 units of 205Tl. Knowing that the half-life of 5Pb is approximately 1.76x10^7 years, we can calculate the age of the meteoroid.
To do this, we need to determine how many half-lives have occurred. By taking the logarithm of the ratio and multiplying it by -0.693 (the decay constant), we can find the number of half-lives. In this case, log (1/65535) * -0.693 gives us a value of approximately 4.03.
Finally, we multiply the number of half-lives by the half-life of 5Pb to find the age of the meteoroid: 4.03 * 1.76x10^7 years = 7.08x10^7 years. Rounding to three significant figures, the estimated age is approximately 2.13x10^9 years.
To learn more about half-life
Click here brainly.com/question/31666695
#SPJ11
A)
A laser beam is incident on two slits with a separation of 0.230 mm, and a screen is placed 4.70 m from the slits. An interference pattern appears on the screen. If the angle from the center fringe to the first bright fringe to the side is 0.165°, what is the wavelength of the laser light?
B)
Light of wavelength 4.90 102 nm illuminates a pair of slits separated by 0.310 mm. If a screen is placed 2.10 m from the slits, determine the distance between the first and second dark fringes. mm
A. The wavelength of the laser light is approximately 6.55 x 10^-7 m.
B. The distance between the first and second dark fringes is approximately 3.10 mm.
A) To find the wavelength of the laser light, we can use the formula for the fringe spacing in a double-slit interference pattern:
λ = (d * sinθ) / m
Where λ is the wavelength, d is the separation between the slits, θ is the angle to the fringe, and m is the order of the fringe.
Plugging in the given values:
λ = (0.230 mm * sin(0.165°)) / 1
Convert the separation between the slits to meters:
d = 0.230 mm = 0.230 x 10^-3 m
Calculate the wavelength:
λ ≈ 6.55 x 10^-7 m
B) To find the distance between the first and second dark fringes, we can use the formula for the fringe spacing in a double-slit interference pattern:
y = (λ * D) / d
Where y is the fringe spacing, λ is the wavelength, D is the distance from the slits to the screen, and d is the separation between the slits.
Plugging in the given values:
y = (4.90 x 10^-7 m * 2.10 m) / 0.310 mm
Convert the separation between the slits to meters:
d = 0.310 mm = 0.310 x 10^-3 m
Calculate the fringe spacing:
y ≈ 3.10 mm
Therefore, the wavelength of the laser light is approximately 6.55 x 10^-7 m, and the distance between the first and second dark fringes is approximately 3.10 mm.
To know more about laser light click here:
https://brainly.com/question/32440754
#SPJ11
If the net charge on the oil drop is negative, what should be
the direction of the electric field that helps it remain
stationary?
Millikan's experiment established the fundamental charge of the electron to be 1.592 x 10-19 coulombs, which is now defined as the elementary charge.
The direction of the electric field that helps an oil drop remain stationary when the net charge on it is negative is upwards. This occurs due to the interaction between the electric field and the negative charges on the oil droplet.
Millikan oil-drop experiment, which is a measurement of the elementary electric charge by American physicist Robert A. Millikan in 1909, was the first direct and reliable measurement of the electric charge of a single electron.
The following are some points to keep in mind during the Millikan Oil Drop Experiment:
Oil droplets are produced using an atomizer by spraying oil droplets into a container.
When oil droplets reach the top, they are visible through a microscope.
A uniform electric field is generated between two parallel metal plates using a battery.
The positively charged upper plate attracts negative oil droplets while the negatively charged lower plate attracts positive oil droplets.
The oil droplet falls slowly due to air resistance through the electric field.
As a result of Coulomb's force, the oil droplet stops falling and remains stationary. The upward electric force balances the downward gravitational force. From this, the amount of electrical charge on the droplet can be calculated.
Millikan's experiment established the fundamental charge of the electron to be 1.592 x 10-19 coulombs, which is now defined as the elementary charge.
To know more about fundamental charge of the electron, visit:
https://brainly.com/question/32913598
#SPJ11
When an oil drop has a negative net charge, the electric field that helps it stay stationary is in the upward direction.
Thus, The interaction between the electric field and the oil droplet's negative charges causes this to happen.
The first direct and accurate measurement of the electric charge of a single electron was made in 1909 by American physicist Robert A. Millikan using his oil-drop experiment to detect the elementary electric charge.
When conducting the Millikan Oil Drop Experiment, bear the following in mind. Using an atomizer, oil droplets are sprayed into a container to create oil droplets. Oil droplets are visible under a microscope once they have risen to the top. Between two people, a consistent electric field is created.
Thus, When an oil drop has a negative net charge, the electric field that helps it stay stationary is in the upward direction.
Learn more about Electric field, refer to the link:
https://brainly.com/question/11482745
#SPJ4
A silver wire has a length of 23.0 m and a resistance of 4.40 at 20.0C. Assuming a circular cross section, what is the wire diameter (in mm)? The reactivity of silver at 10.0 C is 1.59 x 10^-6 omega x m
The diameter of the wire is 0.47 mm.
The resistance of a wire is given by the following formula
R = ρl/A`
here:
* R is the resistance in ohms
* ρ is the resistivity in Ω⋅m
* l is the length in meters
* A is the cross-sectional area in meters^2
The cross-sectional area of a circular wire is given by the following formula:
A = πr^2
where:
* r is the radius in meter
Plugging in the known values, we get:
4.40 Ω = 1.59 × 10^-6 Ω⋅m * 23.0 m / πr^2
r^2 = (4.40 Ω * π) / (1.59 × 10^-6 Ω⋅m * 23.0 m)
r = 0.0089 m
d = 2 * r = 0.0178 m = 0.47 mm
The diameter of the wire is 0.47 mm.
Learn more about diameter with the given link,
https://brainly.com/question/28162977
#SPJ11
NASA has placed a helicopter on Mars. You can find videos of the helicopter (1) rising off of the red soil of Mars and (2) hovering some distance above the surface. In order to do this, what must the helicopter overcome? Note: In this case, the word "overcome" means to "work against" or to "fight" in a way that makes an action possible. If I am walking in a wind storm, I must overcome the wind to move in the direction the wind is coming from. In order to remove a magnet from a refrigerator, I must overcome the magnetic force that holds it in place. a To lift off from the soil, does the helicopter need to overcome weight or inertia or both? To hover above the surface, does it need to overcome weight or inertia or both? To hover above the surface, it must overcome both weight and inertia. To lift off from the surface, it must overcome only weight. To lift off from the surface, it must overcome only inertia. To lift off from the surface, it must overcome both weight and inertia. To hover above the surface, it must overcome only inertia. To hover above the surface, it must overcome only weight.
To lift off from the surface, the helicopter must overcome both weight and inertia. To hover above the surface, it must overcome only weight.
Why is should weight and inertia be overcome?Weight: The helicopter's weight is the force of gravity pulling it down. The helicopter's blades create lift, which is an upward force that counteracts the force of gravity. The helicopter must generate enough lift to overcome its weight in order to lift off.
Inertia: Inertia is the tendency of an object to resist change in motion. When the helicopter is sitting on the ground, it has inertia. The helicopter's rotors must generate enough thrust to overcome the helicopter's inertia in order to lift off.
Hovering: When the helicopter is hovering, it is not moving up or down. This means that the helicopter's weight and lift are equal. The helicopter's rotors must continue to generate lift in order to counteract the force of gravity and keep the helicopter hovering in place.
Find out more on weight and inertia here: https://brainly.com/question/30804177
#SPJ4
5. Viewing a 645 nm red light through a narrow slit cut into a piece of paper yields a series of bright and dark fringes. You estimate that five dark fringes appear in a space of 1.0 mm. If the paper is 32 cm from your eye, calculate the width of the slit. T/I (5)
The estimated width of the slit is approximately 10.08 micrometers.
To calculate the width of the slit, we can use the formula for the spacing between fringes in a single-slit diffraction pattern:
d * sin(θ) = m * λ,
where d is the width of the slit, θ is the angle between the central maximum and the mth dark fringe, m is the order of the fringe, and λ is the wavelength of light.In this case, we are given that five dark fringes appear in a space of 1.0 mm, which corresponds to m = 5. The wavelength of the red light is 645 nm, or [tex]645 × 10^-9[/tex]m.
Since we are observing the fringes from a distance of 32 cm (0.32 m) from the paper, we can consider θ to be small and use the small-angle approximation:
sin(θ) ≈ θ.
Rearranging the formula, we have:
d = (m * λ) / θ.
The width of the slit, d, can be calculated by substituting the values:
d = (5 * 645 × [tex]10^-9[/tex] m) / (1.0 mm / 0.32 m) ≈ 10.08 μm.
To know more about slit refer to-
https://brainly.com/question/32192263
#SPJ11
A 0.0255-kg bullet is accelerated from rest to a speed of 530 m/s in a 2.75-kg rifle. The pain of the rifle’s kick is much worse if you hold the gun loosely a few centimeters from your shoulder rather than holding it tightly against your shoulder. For this problem, use a coordinate system in which the bullet is moving in the positive direction.
(a) Calculate the recoil velocity of the rifle, in meters per second, if it is held loosely away from the shoulder. ANS: -4.91 m/s
(b) How much kinetic energy, in joules, does the rifle gain? ANS: 33.15 J
(c) What is the recoil velocity, in meters per second, if the rifle is held tightly against the shoulder, making the effective mass 28.0 kg? ANS: -0.473
(d) How much kinetic energy, in joules, is transferred to the rifle-shoulder combination? The pain is related to the amount of kinetic energy, which is significantly less in this latter situation.
(a) The recoil velocity of the rifle, in meters per second, if it is held loosely away from the shoulder is -4.91 m/s.
(b) The kinetic energy gained by the rifle is 33.15 J.
(c) The kinetic energy transferred to the rifle-shoulder combination is (3.46 - 0) J = 3.46 J.
(a) Calculate the recoil velocity of the rifle, in meters per second, if it is held loosely away from the shoulder.
Given:
Mass of bullet, m1 = 0.0255 kg
Mass of rifle, m2 = 2.75 kg
Speed of bullet, v1 = 530 m/s
Initial velocity of bullet, u1 = 0 m/s
Initial velocity of rifle, u2 = 0 m/s
Final velocity of rifle, v2 = ?
The total momentum of the rifle and bullet is zero before and after the shot is fired.
Therefore, according to the law of conservation of momentum, the total momentum of the system remains constant, i.e.,
(m1 + m2) u2
= m1 v1 + m2 v2⇒
v2 = [(m1 + m2) u2 - m1 v1]/m2
The negative sign indicates that the direction of the recoil velocity is opposite to the direction of the bullet's velocity.
Since the bullet is moving in the positive direction, the recoil velocity will be in the negative direction.
v2 = [(0.0255 + 2.75) × 0 - 0.0255 × 530]/2.75v2
= -4.91 m/s
Therefore, the recoil velocity of the rifle, in meters per second, if it is held loosely away from the shoulder is -4.91 m/s.
(b) How much kinetic energy, in joules, does the rifle gain?
Given:
Mass of bullet, m1 = 0.0255 kg
Mass of rifle, m2 = 2.75 kg
Speed of bullet, v1 = 530 m/s
Initial velocity of bullet, u1 = 0 m/s
Initial velocity of rifle, u2 = 0 m/s
Final velocity of rifle, v2 = -4.91 m/s
Kinetic energy is given by the formula:
K = 1/2 mv²
Kinetic energy of the rifle before the shot is fired, K1 = 1/2 × 2.75 × 0² = 0 J
Kinetic energy of the rifle after the shot is fired, K2 = 1/2 × 2.75 × (-4.91)² = 33.15 J
Therefore, the kinetic energy gained by the rifle is 33.15 J.
(c) What is the recoil velocity, in meters per second, if the rifle is held tightly against the shoulder, making the effective mass 28.0 kg?
Given:
Mass of bullet, m1 = 0.0255 kg
Mass of rifle, m2 = 28.0 kg
Speed of bullet, v1 = 530 m/s
Initial velocity of bullet, u1 = 0 m/s
Initial velocity of rifle, u2 = 0 m/s
Final velocity of rifle, v2 = ?
Effective mass, M = m1 + m2
= 0.0255 + 28.0
= 28.0255 kg
Using the law of conservation of momentum,(m1 + m2) u2 = m1 v1 + m2 v2⇒
v2 = [(m1 + m2) u2 - m1 v1]/m2
v2 = [(0.0255 + 28.0) × 0 - 0.0255 × 530]/28.0v2 = -0.473 m/s
Therefore, the recoil velocity, in meters per second, if the rifle is held tightly against the shoulder is -0.473 m/s.
(d) How much kinetic energy, in joules, is transferred to the rifle-shoulder combination?
Given:
Mass of bullet, m1 = 0.0255 kg
Mass of rifle, m2 = 28.0 kg
Speed of bullet, v1 = 530 m/s
Initial velocity of bullet, u1 = 0 m/s
Initial velocity of rifle, u2 = 0 m/s
Final velocity of rifle, v2 = -0.473 m/s
Effective mass, M = m1 + m2
= 0.0255 + 28.0
= 28.0255 kg
Using the law of conservation of momentum,(m1 + m2) u2 = m1 v1 + m2 v2⇒
v2 = [(m1 + m2) u2 - m1 v1]/m2
v2 = [(0.0255 + 28.0) × 0 - 0.0255 × 530]/28.0
v2 = -0.473 m/s
Kinetic energy is given by the formula:
K = 1/2 mv²Kinetic energy of the rifle-shoulder combination before the shot is fired, K1 = 1/2 × M × 0² = 0 J
Kinetic energy of the rifle-shoulder combination after the shot is fired, K2 = 1/2 × M × (-0.473)² = 3.46 J
Therefore, the kinetic energy transferred to the rifle-shoulder combination is (3.46 - 0) J = 3.46 J.
Learn more about kinetic energy from this link:
https://brainly.com/question/8101588
#SPJ11