Explanation:
P = IV
V = 240
I = 20
P = ?
P = 240 × 20
P = 4800 watts
If an element forms a 1-ion, in which group of the periodic table would you
expect to find it?
A. 17
Ο Ο
B. 1
C. 2
Ο Ο
D. 18
(It’s A. 17)
If an atom becomes an ion by loosing 4 electrons, what will the net charge of the atom be? pls hurry NO LINKS!
1) -1.6 x 10^-19 C
2) - 3.2 x 10^-19 C
3) - 4.8 x 10^-19 C
4) -6.4 x 10^-19 C
Answer:
1) - 35
2) - 35
3) - 67
4) - 83
Lab: Kinetic Energy What is the purpose of the lab, the importance of the topic, and the question you are trying to answer? What is your hypothesis (or hypotheses) for this experiment? What methods are you using to test this (or each) hypothesis? Section II: Data and Observations Locate the data and observations collected in your lab guide. What are the key results? How would you best summarize the data to relate your findings? Do you have quantitative data (numerical results or calculations)? Do you have qualitative data (written observations and descriptions)? How can you organize this date for your report? Section III: Analysis and Discussion What do the key results indicate? If you constructed graphs, what trends do they indicate in your data? Were there any problems with the experiment or the methods? Did you have any surprising results? Section IV: Conclusions What do the results tell you about your hypothesis(es)? How do the data support your claim above? If you could repeat the experiment and make it better, what would you do differently and why?
Pls hurry!!!!!!!! Worth 100 pts!
When placed near another charge, a 20 microcoulomb charge experiences an attractive force of 0.080 N. What is the electric field strength at that location?
Answer:
E = 4000 N/C
Explanation:
Given the following data;
Force = 0.080 N.
Charge, q = 20 microcoulomb = 20 * 10^-6 = 2 * 10^-5 Coulombs
To find the electric field strength;
Mathematically, the electric field strength is given by the formula;
Electric field strength = force/charge
Substituting into the formula, we have;
E = 0.080/0.00002
E = 4000 N/C
The spiral spring of a spring balance is 25.0cm long when 5N hangs on it and 30cm long when the weight is 10N , what is the length of the spring , if the weight is 3N assuming Hooke's law is obeyed ?
Explanation:
let the length be Lcm
5−325−L = 10−530−25
L = 23cm
a piece of wood has mass of 250g and volume of 400cm cubed. what is its density
Answer:
[tex] 0.625 \: g {cm}^{ - 3} [/tex]
Explanation:
[tex]density \: = \frac{mass}{volume} \\ \\ = \frac{250}{400} \\ \\ = 0.625 \: g {cm}^{ - 3} [/tex]
4. A car accelerates at 2.5 m/s^2, covers 4 km in 0.8 min. How fast was it moving at the beginning
of the time interval? *
Answer:
Initial velocity, u = 23.33 m/s
Explanation:
Given the following data;
Acceleration = 2.5 m/s²
Distance = 4 km to meters = 4000 meters
Time = 0.8 mins to seconds = 0.8 * 60 = 48 seconds.
To find the initial velocity, we would use the second equation of motion;
[tex] S = ut + \frac {1}{2}at^{2}[/tex]
Where;
S represents the displacement or height measured in meters.
u represents the initial velocity measured in meters per seconds.
t represents the time measured in seconds.
a represents acceleration measured in meters per seconds square.
Substituting into the equation, we have;
4000 = u*48 + ½*2.5*48²
4000 = 48u + 1.25*2304
4000 = 48u + 2880
48u = 4000 - 2880
48u = 1120
Initial velocity, u = 1120/48
Initial velocity, u = 23.33 m/s
1. A book has a weight of 3.5 Newtons. So the force to lift it would also be 3.5
Newtons. If you lift it up to a shelf, and apply the force for 4 meters, how much
work is done?
Answer:
anashe
Explanation:
full
Answer:
w=fxd
w=3.5x4
w=14
this is the correct answer
In which of the follwing media sound travels fast ? A . oxygen B . copper C . sea water D . steel
sea water is the answer to your question
Answer:
Hey mate.....
Explanation:
This is ur answer.....
Sound travels faster in steel than in water. Similarly, sound travels faster in water than in air. This is because in solids, the distances between the molecules are closer and thus the atoms are more densely packed than in gases and liquids
Hope it helps!
Brainliest pls!
Follow me! :)
A ball is tossed with enough speed straight up so that it is in the air several seconds. Assume upward direction is positive and downward is negative. Part A What is the velocity of the ball when it reaches its highest point?
Answer:
Answer:
The velocity of the ball when it reaches its highest point is 0
Explanation:
The velocity of the ball when it reaches its highest point is 0
Once the ball is tossed into the air, as it goes up, the initial velocity with which it was thrown, reduces, as the motion of the ball is hindered by several forces such as gravity and air resistance. This slows down the velocity of the ball, up until it reaches a point, where the upwards velocity of the ball becomes zero. at this point, the ball begins to fall back to the ground.
What physical quantity do you obtain when you divide
molar mass (Mm) by molar volume (Vm)?
Answer:
The mass density (ρ)
Explanation:
The molar volume (Vm) is the volume that a mole of an element or compound occupies at standard temperature and pressure STP
The molar volume can be found as follows;
[tex]Vm = \dfrac{Mm}{\rho}[/tex]
Where;
Mm = The molar mass
ρ = The mass density
The molar mass (Mm) of an element or a compound is the ratio of the mass of the element or compound to the amount of the element or compound in the given mass
The mass density, ρ, of an element or a compound is the mass of a unit volume of the element or compound
Therefore, we have;
[tex]\rho = \dfrac{Mm}{Vm}[/tex]
When we divide the molar mass (Mm) by the by the molar volume (Vm), we obtain the mass density (ρ).
You’ve probably seen how the surface of a tire can partially melt and leave a mark on the road when a car’s brakes are applied really hard. Explain why the surface of the tire melts.
Answer:
The friction of braking heats up the tire and the road. The temperature is so high that it reaches the melting point of the rubber in the tire. The melting rubber is what leaves a mark on the road.
Explanation:
Answer:
the friction of braking heats up the tires and the road. then the temperature gets even hotter to the point where it melts the rubber.
Explanation:
this is my answer so be careful how you copy it, but you've got this guys schools is almost out stay strong an have fun and be safe this summer keep pushing <33.
remember you're loved by many
- Jason Edwards 5/15/23
Hell please thanks!!!!!!’
Answer:
liquid phase
Explanation:
it is liquid phase because molecules are not that tightly packed as solid and not that far away from each other as in gas phase.
Why do the planets orbit the Sun in an elliptical shape?
Answer:
That's essentially how objects in orbits work as they move closer to the body they orbit, they accelerate faster and faster. Our penny will get so fast that, once it comes around the planet, it will be flung very far away, which will then slow it down. This is what creates an elliptical orbit.
Explanation:
NO LINKS PLEASE HELP The Spring Tide is found during which moon phases?
Question 5 options:
First and Last quarter
Full and New Moon
Waxing and Waning Gibbous
It varies each month
Answer:
Full and New Moon
Explanation:
Two glass rods are rubbed together. One of the glass rods are brought near (but
does not touch) an uncharged pith ball. Would you expect the pith ball to attract,
repel, or do nothing? Explain why.
Answer:
The correct answer is - do nothing.
Explanation:
If two same or identical objects, in this instance two glass rods, were rubbed together they neither attract nor repel each other as there is no transfer of electrons from one material to the other material as there is no difference in their charges.
Only two different objects are able to transfer electrons from one material to the other material if rubbed together, to produce the conditions for static electricity to be observed. Therefore there would be no charge on the glass rod so there would be no charge to balls to repel or attract.
A 120 volt refrigerator uses 650 watts. Calculate how much work is done by the refrigerator in one hour?
Answer:
2,340,000 J
Explanation:
Work done can be described as when energy or force is applied to an object to cause displacement
Work done is measured in joules
1 Watt = 1 Joule / second
650 watts = 650 Joules / second
convert 650 joules to seconds by multiplying by 3600
650 x 3600 = 2,340,000 J
3. Can abiotic and biotic factors affect one another? Provide an example.
Abiotic variables are particularly essential since they have a direct impact on organisms' ability to live.
what type of object is called the object at rest ? sort answer.
In short :
An object is said to be at rest when it doesn't change is position with respect to a stationary object which is taken as its reference point or origin of the object, as the time passes.
______________________________Find the current flowing across the 20 Ω
resistor. .
35 Ω
20 Ω
15 Ω
10V
[?]Α
Please no links
0.23 A across the 20-ohm resistor
Explanation:
The 20-ohm and 35-ohm resistors are in parallel so their combined resistance is
(1/20) + (1/35) = 0.0786 ohm^-1 or 12.73 ohms
These two are in turn connected in series with the 15-ohm resistor so the total resistance of the circuit is
R = 12.73 ohm + 15 ohm
= 27.73 ohm
Hence, the total current drawn by the circuit is
I = V/R = (10 V)/(27.73 ohm)
= 0.36 A
The potential across the 15-ohm resistor is
V1 = IR = (0.36 A)(15 ohm)
= 5.4 V
Now the potential across the 20-ohm and 35-ohm resistors is
V2 = V - V1 = 10V - 5.4V
= 4.6 V
This means that the current across the 20-ohm resistor is
I = V/R = (4.6 V)/(20 ohm)
= 0.23 A
Answer:
Answer would be 0.23
Explanation:
Put in 0.23
You have a grindstone (a disk) that is 98.0 kg, has a 0.335-m radius, and is turning at 100 rpm, and you press a steel axe against it with a radial force of 23.6 N. Assuming the kinetic coefficient of friction between steel and stone is 0.192, calculate the angular acceleration of the grindstone.
Answer:
[tex]a=0.276[/tex]
Explanation:
From the question we are told that:
Mass [tex]m=98.kg[/tex]
Radius [tex]r=0.335[/tex]
Angular velocity [tex]\omega=100rpm[/tex]
Radial force of [tex]F_r=23.6 N.[/tex]
Kinetic coefficient of friction [tex]\mu=0.192[/tex]
Generally the equation for Kinetic Force is mathematically given by
[tex]F_k=\mu.F_r[/tex]
[tex]F_k=0.192*23.6[/tex]
[tex]F_k=4.5312[/tex]
Generally the equation for Torque on Center is mathematically given by
[tex]Ia=f_k*r[/tex]
Where
[tex]I=\frac{Mr^2}{2}[/tex]
Therefore
[tex]a=\frac{2f_k}{Mr}[/tex]
[tex]a=\frac{2*4.5312}{98*0.335}[/tex]
[tex]a=0.276[/tex]
Therefore Angular acceleration of the grindstone is
[tex]a=0.276[/tex]
Define: What is energy transfer
and give me an example how you are planning on using energy transfer.
Answer:
Energy transfer is the movement of energy from one location to another. For example, when electricity moves from a wall plug, through a charger, to a battery. .While energy can be transferred or transformed, the total amount of energy does not change
HELPPPPPPPO
In the diagram, q1 = +6.60*10^-9 C and
q2 = +3.10*10^-9 C. Find the magnitude
of the total electric field at point P.
Explanation:
is this the full question?
Answer:
1258.46
Explanation:
Acellus
The process of converting energy produced by wind turbines into electricity is about 40 percent efficient. If the transport of electricity is 90 percent efficient and fluorescent light bulb efficiency is known to be 20 percent, what is the overall efficiency for converting wind into fluorescent lighting
Answer: 7.2%
Explanation:
Given
Efficiency of converting energy produced by wind into electricity is about [tex]\eta_1=40\%[/tex]
Transport of electricity efficiency [tex]\eta_2=90\%[/tex]
Fluorescent light bulb efficiency is [tex]\eta_3=20\%[/tex]
Overall efficiency is the product of all the efficiencies i.e.
[tex]\Rightarrow \eta=\eta_1\times \eta_2\times \eta_3\\\\\Rightarrow \eta=0.4\times 0.9\times 0.2\\\Rightarrow \eta=0.072\ \text{or}\ 7.2\%[/tex]
Therefore, the overall efficiency is 7.2%
State the precautions taken to ensure accurate measurement when having an experiment using the principle of moment
Precaution: balance the ruler being used first.
Precaution: balance the ruler being used first.Use distances from the pivot of greater than 25 cm (250 mm).
Precaution: balance the ruler being used first.Use distances from the pivot of greater than 25 cm (250 mm).Weigh the unknown and known masses in your hands before using the ruler, and place the lighter mass as far from the pivot as possible.
Precaution: balance the ruler being used first.Use distances from the pivot of greater than 25 cm (250 mm).Weigh the unknown and known masses in your hands before using the ruler, and place the lighter mass as far from the pivot as possible.Measure distances from the pivot to the centre of mass of the object.
A 25 kg child is riding on a swing. If the child travels 8.9 m/s at the bottom of their swing, how high into the air is the child able to swing?
Answer:
h = 4.04 m
Explanation:
Given that,
Mass of a child, m = 25 kg
The speed of the child at the bottom of the swing is 8.9 m/s
We need to find the height in the air is the child is able to swing. Let the height is h. Using the conservation of energy such that,
[tex]mgh=\dfrac{1}{2}mv^2\\\\h=\dfrac{v^2}{2g}[/tex]
Put all the values,
[tex]h=\dfrac{(8.9)^2}{2\times 9.8}\\\\h=4.04\ m[/tex]
So, the child is able to go at a height of 4.04 m.
When two oceanic plate boundaries meet, this crustal feature forms?
A)
sea floor spreading
B)
volcanic island arc
C)
plate tectonics
The circular motion of water molecules extends to a depth that is equal to:a. wave height/wavelength.b. wave height/wave period.c. wavelength/wave height.d. wavelength/2.e. wavelength/20.
Answer:
d. wavelength/2.
Explanation:
The circular motion of water molecules extends from regions of shallow water to deep water. It ranges from a depth, H < L/20 for shallow water to a depth of H > L/2 for deep water where L is the wavelength of the wave.
For depths greater than L/2,the circular motion is not affected by the wave energy. So, the maximum depth for the circular motion is L/2 = wavelength/2.
Why do people sound weird when they breath in balloon air?
Answer:
your voice travels much more quickly across your vocal cords, also LOT less density which causes the sound to travel over twice as fast through helium than it does regular air.
ballon Air = Helium
Hope this helps and brainlist is appreciated !
- ☾
Un gallo se pavonea en línea recta en el techo. Su movimiento se muestra en la siguiente gráfica de la posición horizontal, x, contra el tiempo, t. ¿Cuál es la rapidez instantánea del gallo en t= 1s?
Answer:
Entonces, velocidad instantánea = | v | = 0,25 m / s
Explanation:
pregunta completa
Por favor, encontrar el archivo adjunto
Solución
La velocidad instantánea está dada por,
v = dx / dt = pendiente de la curva x-t
aquí, del gráfico:
en x = 1 m ---> t = 8 s
en x = 3 m ---> t = 0 s
entonces, dx = 1-3 = -2 m
dt = 8-0 = 8 s
Entonces,
v = -2/8
v = -0,25 m / s
Dado que, pseed es una cantidad escalar.
Entonces, velocidad instantánea = | v | = 0,25 m / s