Answer:
m = 4.58 g.
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to realize this problem is solved via the ideal gas equation:
[tex]PV=nRT[/tex]
As we can calculate the moles of propane given the pressure, temperature and volume as shown below:
[tex]n=\frac{PV}{RT} \\\\n=\frac{1.10atm*2.00L}{0.08206\frac{atm*L}{mol*K}*258K} \\\\n=0.104mol[/tex]
Finally, since the molar mass of propane is 44.1 g/mol, we calculate the mass by following the shown below mole-mass conversion factor:
[tex]m=0.104mol*\frac{44.1g}{1mol}\\\\m= 4.58g[/tex]
Regards!
What happens when an electron moves to a higher energy level?
A. It releases energy of a specific frequency
B. It gains energy in a quantized amount.
C. It loses energy in the form of light.
D. It absorbs photons of many energies
ANSWER: B. It gains energy in a quantized amount.
Answer:
B. It gains energy in a quantized amount.
an erlenmeyer flask contains 15.00mL of 0.030 M HCI before titration. 5.00 mL of 0.050 of M NaOH is added to the HCI in the flask during titration. What is the mole ratio of acid (HCI) to base (NaOH) in the balanced neutralization equation?
0.05 to 0.03
1:1
1:2
which expression. gives the actual moles of base added?
0.050x5.00
0.030x0.015
0.050x0.005
How many moles of H+ will be present following neautralization?
0.25
0.00025
0.025
Answer:
1.1
0.050*0.005
0.00025
Explanation:
Name the following alkene:
CH3CH = CHCH2CH3
A. 3-pentane
B. 2-pentene
C. 2-pentane
D. 3-pentene
Answer:
2-pentene
Explanation:
The name of the alkene is 2 pentene. The correct option is B, 2-pentene.
What is 2-pentene?Alkenes with the chemical formula [tex]C_5H_10[/tex] are known as pentene. Within its molecular structure, each has one double bond.
The given alkene [tex]CH_3CH = CHCH_2CH_3[/tex] is 2-pentene because the double bond is present in the second carbon and it's pentene because there are five carbons present.
Thus, the correct option is B. 2-pentene.
Learn more about 2-pentene
https://brainly.com/question/19593832
#SPJ2
Rachard is studying a sample of a substance. The sample is in a large, triangle-shaped flask. Rachard moves the sample to a small, rectangular container. Both containers are closed. Below is an image of the containers used by Rachard. She notices that the shape and the volume of the substance both change when the sample is moved. In which state of matter is the substance?
Astronauts must be protected from extreme heat while
reentering the Earth's atmosphere. Scientists can use the
engineering design process to help make reentry safer.
You have defined the problem as a need for heat shields to be stronger. What
should be your next step in using the engineering design process to solve the
problem?
O A. Communicate your solution to your team members.
O B. Update your initial design for the heat shield.
O C. Identify the criteria and constraints of the project.
O D. Build a prototype of a possible new type of heat shield.
The next engineering step to be taken is to update your initial design for the heat shield.
What is a heat sheild?The term heat sheild refers to a device that can be used to shield an from astronaut extreme heat especially as they re-enter the earth's atmosphere.
After you have identified the problem, the next engineering step to be taken is to update your initial design for the heat shield.
Learn more about heat sheild:https://brainly.com/question/21504467?
#SPJ2
If it takes 720. mL of 0.00125 M Mg(OH)2 to neutralize 425 mL of an HCI
solution, what is the concentration of the HCI? Mg(OH)2 + HCl →MgCl2
+ H20
Answer:
0.004235 M
Explanation:
The neutralization reaction of this question is given as follows:
Mg(OH)2 + 2HCl → MgCl2 + 2H2O
Using the formula below:
CaVa/CbVb = na/nb
Where;
Ca = concentration of acid (M)
Cb = concentration of base (M)
Va = volume of acid (mL)
Vb = volume of base (mL)
na = number of moles of acid = 2
nb = number of moles of base = 1
From the information provided in this question;
Ca = ?
Cb = 0.00125 M
Va = 425 mL
Vb = 720 mL
na (HCl) = 2
nb = (Mg(OH)2) = 1
Using the formula; CaVa/CbVb = na/nb
Ca × 425/0.00125 × 720 = 2/1
425Ca/0.9 = 2
472.2Ca = 2
Ca = 2/472.2
Ca = 0.004235 M
why does a plant have a cell wall and a cell membrane?
ASAP Pls have to turn it in at 11:00pm
Answer:
The cell wall surrounds the plasma membrane and provides the cell tensile strength and protection. ... The cell wall surrounds the plasma membrane of plant cells and provides tensile strength and protection against mechanical and osmotic stress.
hope It Helps U
Please Mark me As brainlist
The compound AlP (aluminum phosphide) is a compound semiconductor having mixed ionic and covalent bonding. Calculate the fraction of bonding that is ionic.
Answer:
0.086
Explanation:
The formula for calculating the fraction of a covalent bond can be expressed as:
= exp (-0.25ΔE²)
[tex]= exp[-0.25(E_{Al}-E_{p})^2]---(1)[/tex]
from the equation above;
[tex]E_{Al}[/tex] = the electronegativity of aluminum
[tex]E_P[/tex] = electronegativity of phosphorus
Using the data from periodic table figures;
[tex]E_{Al}[/tex] = 1.5
[tex]E_P[/tex] = 2.1
∴
fraction of the covalent = exp[-0.25(1.5 - 2.1)²]
fraction of the covalent = exp(-0.09)
fraction of the covalent = 0.914
Now, the fraction of ionic bond will be = 1 - the fraction of covalent bond
= 1 - 0.914
∴
the fraction of bond that is ionic = 0.086
What happens in radioactive decay?
O A. An electron is lost to form a negatively charged particle.
O B. An unstable nucleus breaks down into smaller parts.
O C. Two smaller nuclei are joined to form one larger nucleus.
O D. A large nucleus breaks apart to form smaller nuclei.
SHIRME
A radioactive atom will spontaneously release radiation in the shape of energy rather than particles in order to transition into a more steady state.
Why is something radioactive?Radioactivity, as its name suggests, seems to be the act of generating radiation without any external cause. This is carried out by an unstable atomic nucleus that "wants" to abandon certain power in order to change to a more stable form.
Are people radioactive at all?Absolutely, since humans consume radioactive materials from the environment through food, drink, and air, our bodies are inherently radioactive. Our bodies take these substances in and store them in our bones, tissues, and organs. We also breathe them in and consume them.
To know more about radioactive visit:
https://brainly.com/question/1770619
#SPJ1
When a balloon containing 635 mL of air is taken from sea level (at standard pressure) to a higher altitude, the balloon expands to 829 mL. What is the air pressure at this new altitude (in atm)?
Answer:
0.766atm
Explanation:
Boyles law
P1V1=P2V2
1×635=P2×829
P2=635/829
P2=0.766atm
is a glow stick Endothermic or exothermic ?
Answer:
exothermic
Explanation:
What piece of apparatus could be used to measure the volume of gas produced in a reaction
1)beaker
2)gas syringe
3) top pan balance
Answer: 2)gas syringe
Explanation:
the volume of a gas is usually measured with a gas syringe (or sometimes with an upside-down measuring cylinder)
Answer:
top pan balance
Explanation:
An empirical formula calculation gives a molar ratio of 1.0 oxygen, 4.8 hydrogen, 4.1 carbon and 1.8 nitrogen. If the molecular mass is approximately 200 amu, what is the molecular formula
Answer:
[tex]C_8H_{10}O_2N_4[/tex]
Explanation:
Hello there!
In this case, according to the given information about the empirical formula of this compound, we can infer that these mole ratios can be rounded to the following whole numbers in order to find the empirical formula:
[tex]C_4H_5ON_2[/tex]
Whose molar mass is 97.09 amu and thus, the ratio of the molecular to the empirical molar mass is:
[tex]200/97.09=2.1[/tex]
Which is almost a factor of 2; and therefore, the resulting molecular formula is:
[tex]C_8H_{10}O_2N_4[/tex]
Regards!
Carbon dioxide had how many nonbonding electron pairs in its electron arrangement?
A. 2
B. 4
C. 8
D. 6
E. 3
Answer: A.) 2 is the answer.
Explanation:
how many cats are in the word
Answer: more than 70,00 and most of that population is living on the streets
Which best explains the relationship between evaporation and temperature?
• A liquid evaporates slower at lower temperatures because the molecules are more spread apart and are not pushed
as easily from the liquid's surface.
O A liquid evaporates faster at lower temperatures becaus the attractions are decreased and more particles can
escape the surface of the liquid.
© A liquid evaporates slower at higher temperatures because the vapor pressure of the liquid is higher, SO fewer
molecules can escape the surface.
• A liquid evaporates faster at higher temperatures because more particles have a higher speed and can overcome
attractions in the liquid.
Answer: D
Explanation:
liquid evaporates faster at higher temperatures because more particles have a higher speed and can overcome attractions in the liquid.
Answer:
D. A liquid evaporates faster at higher temperatures because more particles have a higher speed and can overcome attractions in the liquid.
Explanation:
Correct on Edge 2022!!!
Good luck everyone, you got this! Have a great day!
What is the thermal efficiency of an engine that takes n moles of diatomic ideal gas through the cycle
Answer:
The thermal efficiency of an engine is [tex]0.15[/tex] that is 15%
Explanation:
Specific heat of a gas at constant volume is
[tex]C_{v}=\frac{fR}{2}[/tex]
here, [tex]f=[/tex]degree of freedom
[tex]R=[/tex]universal gas constant
Thermal efficiency of a cycle is
[tex]\frac{total workdone}{gross heat absorbed}[/tex]
Gross heat absorbed is amount of heat that absorbed.
ω[tex]=P_{o} V_{o}[/tex]
[tex]Q_{AB}=[/tex]Δ[tex]V_{AB}+[/tex]ω[tex]_{AB}[/tex][tex]=nC_{v}(T_{f}-T_{i} )[/tex]
[tex]=n\frac{f}{2}(RT_{f}-RT_{i} )[/tex][tex]=\frac{f}{2}(P_{o}V_{o} )[/tex]
[tex]Q_{BC}=n(\frac{f}{2}+1 )R(T_{f}-T_{i} )[/tex]
[tex]=(\frac{f}{2} +1)(4P_{o}V_{o}-2P_{o}V_{o} )[/tex]=[tex]=(\frac{f}{2}+1)2P_{o}V_{o}[/tex]
[tex]Q_{CD}=-ve and Q_{DA}=-ve[/tex] these 2 are not the part of gross heat
η[tex]=\frac{P_{o}V_{o} }{(\frac{3f}{2}+2 )(P_{o}V_{o})}[/tex]
[tex]=\frac{1}{(\frac{3f}{2}+2 )}[/tex]
For monoatomic gas [tex]f=3[/tex]
η[tex]=\frac{2}{13}[/tex]
[tex]=0.15[/tex]
True or false: A skeleton equation in chemistry shows the relative amounts of all materials in the reaction
Answer:
false im pretty sure.
help ! thank u / ill give brainlist !
Give two examples of energy transformations that occur throughout the journey to or on the planet.
Answer:
Our bodies convert chemical energy in our food into mechanical energy for us to move.
An electric fan transforms electrical energy into kinetic energy
Reword it tho
Hope this helps!!
Calculate the percent composition of Ca3P2
Answer:
Ca - 66%, P - 34%
Explanation:
So, this is the formula we can use to find the amount of each element:
Element count * Atomic mass = Mass
Plug in our elements for this:
Ca - 3*40.078=120.234
P - 2*30.973=61.946
Now, to find the percentage of mass, we must find total mass, and divide the two elements mass count by this total mass:
120.234+61.946=182.18
Now divide each element mass by the total mass:
Ca - 120.234/182.18=0.6599(Round to 0.65)
P - 61.946/182.18=0.34002(Round to 0.34)
Then multiply both numbers by 100 to get the percentage:
Ca - 65%
P - 34%
So these our your two answer!
Hope this helps!
How many neutrons are in an atom of argon–40?
Answer:
22 neutrons
Explanation:
If so please sorry
You dissolve 14 g of [tex]Mg(NO_{3} )_{2}[/tex] in water and dilute to 750 mL. What is the molarity of this solution?
Show your work
Questions
Determine the primary and secondary valencies of the following complexes and calculate their spin only magnetic
moment.
iii. [Cu(OH2)6]504
i. K[TI(CN).]
ii. [V(NH3)4Br2]
iv. K3 [Cr(CN)6]
Answer:
yes
Explanation:
yes
it refers to the length of the entire path the object travelled
Answer:
Path length is the overall distance traveled following the path of where the object travel. ... Displacement is the distance from the starting point of the object to its final point irregardless where it travels.
If 15L of neon is at 25C is allowed to expand to 45L. What is the new temperature to maintain constant pressure?
Answer:
[tex]T_2=894.45K=621.30\°C[/tex]
Explanation:
Hell there!
In this case, according to the given information, it turns out possible for us to calculate the new temperature by applying the Charles' law as a directly proportional relationship between temperature and volume:
[tex]\frac{V_2}{T_2} =\frac{V_1}{T_1}[/tex]
Thus, we solve for the final temperature, T2, as shown below (make sure T1 is in Kelvins):
[tex]T_2=\frac{V_2T_1}{V_1} \\\\T_2=\frac{(25+273.15)K*45L}{15L}\\\\T_2=894.45K=621.30\°C[/tex]
Regards!
HELP ME ASAP PLEASE
I need the answers I’m in a hurry
Answer: First box----Hail
Second Box-------Snow
Thrid Box-------Sleet
Forth Box-----Rain
Hope that helped! :)
sodium is an inactive metal why
Answer:
Inactive metals are inert metals that doesn’t react with most of the chemicals.They are highly resistant to oxidation and corrosion when exposed to moisture.
Explanation:
Fill the missing blank
i’m generally confused about this so if anyone could help me it would mean a lot!!!!
Answer:
The answers to your questions are given below.
Explanation:
1. The symbol of Zinc is Zn
2. Determination of the proton number
Atomic number is simply defined as the number of protons in the nucleus of an atom. Mathematically, it is expressed:
Atomic number = proton number
Atomic number = 30
Therefore,
Proton number = 30
3. Determination of the neutron number
Mass Number = 65
Proton number = 30
Neutron number =?
Mass number = Proton + Neutron
65 = 30 + Neutron
Collect like terms
65 – 30 = Neutron
35 = Neutron
Thus,
Neutron number = 35
4. Determination of the electron number
Since the element is in it's ground state (i.e it has no charge), thus, the number of protons of the element is the same as number of electrons i.e
Electron number = proton number
Proton number = 30
Thus,
Electron number = 30
How many molecules of sodium fluoride (NaF) are found in 7.2 moles of sodium fluoride?
Answer:
well please answer me it's question too after you get it
Explanation:
i am also stucked in that question
No. of molecules of any substance is one mole
= Avogadro's Number = (6.022 x 10^23)
So, no. of molecules in 7.2 moles of sodium fluoride
= 7.2 × (6.022 x 10^23)
= 4.33584^24
Qualitatively explain the effect of changing concentration of Cu2+ on voltage using your experimental observations and the Keq values below. (No calculations are required).
(a) Cu^2+(aq) + 4NH3(aq) ⇄ [Cu(NH^3)4]^2+(aq) Keq = 1.2 x 10^12
(b) CuS(s) ⇄ Cu^2+(aq) + S^2-(aq) , Keq = 8.5 x 10^-45
Cu/Zn = 0.525 V
after 1 drop NH3: 0.505 V
after 2 drops NH3: 0.435 V
Cu/Zn = 0.510 V
after 1 drop Na2S: 0.452 V
after 2 drops Na2S: 0.393 V