A 10 kg object moving to the left collides with and sticks to a 3 kg object moving to the right. Which of the following is true of the motion of the combined objects immediately after the collision?

Answers

Answer 1

Answer:

"Cannot be determined," if that's an answer choice. It depends on the velocities of both objects, since momentum=mass*velocity.

Explanation:


Related Questions

The spacecraft was moved closer to the launcher by the same amount Wednesday as it was on Tuesday, and yet its speed went up much more. Claim 3 suggests that the magnetic force was much stronger on Wednesday than on Tuesday.

Consider the two subclaims for Claim 3 and answer the question below.

Claim 3.A: The magnetic force was much stronger on Wednesday because the magnet was stronger.
Claim 3.B: The magnetic force was much stronger on Wednesday because the magnetic force is stronger closer to the magnets.

Which claim do you think is more convincing, and why?

Answers

Answer:

The magnetic force was much stronger on Wednesday because the magnetic force is stronger closer to the magnets.

Explanation:

The magnetic force was much stronger on Wednesday than on Tuesday because the magnetic force is stronger closer to the magnets. Therefore claim 3B is more convincing.

What is magnetic force?

Magnetic force can be described as a consequence of electromagnetic force which is caused due to the motion of charges. A moving charge surrounds itself with a magnetic field and the force that arises due to interacting magnetic fields.

The magnetic force between two moving charges is the effect exerted upon either charge by a magnetic field generated by the other. The magnetic force depends on the charge, the motion of each of the objects, and the separation between them.

The magnitude of the force is determined by the cross product of velocity and the magnetic field is equal to q.[v × B]. The resultant force can be described as perpendicular to the direction of the velocity and the magnetic field.

Therefore, the magnetic force was much stronger closer to the magnets.

Learn more about magnetic force, here:

https://brainly.com/question/3160109

#SPJ2

Please help me with this 29 points

Answers

Answer:

)Give the definition of poverty line as defined by the World Bank.

What is the weight of a 25 kg object on Earth with an acceleration due to gravity of 9.8m/s/s?

2.45 n
24.5 n
245 n
2450 n​

Answers

245 n hope this helps

What x rays travel at the speed of

Answers

What is the speed? Like we need the pic or something

Physics gravity question, Please help

Answers

Answer: 2.7 x10^-4 N

Explanation: 6.674 ×10^-11 × 1000 x 1000 divided by 0.5 squared.

Using the American Engineering system of units (AES), a) Calculate the weight of a 170.5 lbm person on the surface of the earth, where the local acceleration due to gravity is 32.174 ft/s2 . Report your answer in pound-force, lbf. b) What would be the weight of a 170.5 lbm astronaut on the moon, where the local acceleration due to gravity is 5.32 ft/s2 . Report your answer in pound-force, lbf.

Answers

Answer:

a) the weight of the person is 170.5 lbf

b) weight of the astronaut on the moon is 28.2 lbf

Explanation:

Given the data in the question;

a)

we know that;

weight on the surface of the earth = m[tex]g_{earth[/tex]

given that m = 170.5 lbm and g = 32.174 ft/s²

we substitute

weight on the surface of the earth =  170.5 lbm × 32.174 ft/s²

= 5485.667 lbm-ft/s²

1 lbf = 32.174 lbm-ft/s²

so

weight on the surface of the earth = (5485.667 / 32.174) lbf

weight on the surface of the earth = 170.5 lbf

Therefore, the weight of the person is 170.5 lbf

b)

given that;

weight on the surface of the earth = m[tex]g_{moon[/tex]

m = 170.5 lbm and g = 5.32 ft/s²

weight on the surface of the earth = 170.5 lbm × 5.32 ft/s²

= 907.06 lbm-ft/s²

1 lbf = 32.174 lbm.ft/s²

weight on the surface of the earth = ( 907.06 / 32.174 ) lbf

weight on the surface of the earth = 28.2 lbf

Therefore, weight of the astronaut on the moon is 28.2 lbf

The potential energy of a 40-kg cannonball is 14000 J. How high was the cannon ball to have this much potential energy?

Answers

Answer:

35.71 m

Explanation:

Potential energy is calculated using this formula:

PE = mghwhere m = mass (kg). g = gravitational acceleration on Earth (9.8 m/s²), h = height (m)

We are given 3 out of the 4 variables in this problem. We want to solve for h, the height of the cannon ball.

List out the known variables:

PE = 14,000 J m = 40 kg g = 9.8 m/s² h = ? m

Substitute these values into the potential energy formula.

14,000 = (40)(9.8)h 14,000 = -392h h = 35.7142857143

The cannonball was 35.71 m high to have a potential energy of 14,000 J.

I want answer plzz??

Answers

Answer:

a=0.5g ms^-2

Explanation:

Let tension be T

acceleration be a

g be gravitational acceleration 9.81ms^-2

They share same T and a

by force diagram the net force on m:

T-2.1g=2.1a

net force on M:

6.3g-T=6.3a

solve:

(T-2.1g)/(6.3g-T)=2.1a/6.3a

3T+T=12.6g

T=3.15g newton

3.15g-2.1g=2.1a

a=0.5g ms^-2

coefficient of viscosity of a glycerine is 8.4 poison explain

Answers

Answer:

coefficient of viscosity of 8.4 poison denotes that the tangential frictional force acting per unit area when divided by the velocity gradient as a result of streamline flow conditions gives 8.4.

Explanation:

Viscosity is defined as the extent to which a fluid can resist flow when a force is applied to it.

Now, coefficient of viscosity is the term in which viscosity is calculated. It is basically the tangential frictional force acting per unit area which is divided by the velocity gradient as a result of streamline flow conditions.

Thus, coefficient of viscosity of 8.4 poison denotes that the tangential frictional force acting per unit area when divided by the velocity gradient as a result of streamline flow conditions gives 8.4.

When you are driving on the freeway and following the car in front of you, how close is too close? Let's do an estimation.
1. Pick a car model (preferably the one you drive, but can also be any car of your dream), and find its stopping distance at highway speeds (you can usually find this type of data online).
2. Assuming that the car in front of you suddenly does a hard brake. For simplicity, assume that its braking performance is about the same as yours. Then also assume a reasonable amount of reaction time on your part (the time delay between seeing the brake lights lit up and applying your own brake). In order for you not to run into the car your are following, what's the closest distance you need to keep between the two cars?
3. Redo the same calculation if the vehicle in front of you is a typical big-rig truck. Find its braking data online.
4. There is a rule of thumb which says that you must stay one car length behind the car in front of you for every 10 mi/h of driving speed. From your calculation, does this rule make sense?

Answers

Answer:

1) v= 90km/h  d = 70 m,  2)  x₁ = v t_r,  x₁ = 6.25 m, 3) x₁=6.25 no change

4) x = 22 m

Explanation:

1) for the first part, you are asked to find the minimum safety distance with the vehicle in front

The internet is searched for the stopping distance for two typical speeds on the highway

v (km/ h)      v (m/s)      d (m)

90                  25           70

100                 27.78      84

the safe distance is this distance plus the distance traveled during the person's reaction time, which can be calculated with infirm movement

              v = x / t_r

               x₁ = v t_r

the average reaction time is t_r = 0.25s for a visual stimulus and t_r 0.17 for an auditory stimulus

therefore the safe distance is

              x_total = x₁ + d

2) The distance is the sum of the distance traveled in the reaction

              x₁ = v t_r

for v = 90 km / h

              x₁ = 25 0.25

              x₁ = 6.25 m

for v = 100 km / h

              x₁ = 27.78 0.25

              x₁ = 6.95 m

the total distance is

               x_total = x₁ + d

for v = 90 km / h

             x_total = 25 0.25 + 70

             x_total = 76.25 m

this is the distance until the cars stop and do not collide

3) the stopping distance of a truck is

   v = 90 km / h       d = 100 m

in this case we see that the braking distance is much higher,

the safe distance is given by the distance traveled during the reaction, as the truck brakes slower than the car this distance does not change

4) let's analyze the empirical rule: maintain the length of a car for each increase in speed of v = 10 m / h = 4.47 m / s

for the car case at v = 90km / h = 25 m / s

according to this rule we must this to

           x = 25 / 4.47 = 5.6 cars

each modern car is about 4 m long so the distance is

           x = 22 m

we see that this distance is much greater than the reaction  distance so it does not make much sense

Which of the following best describes the location of the
mantle?
A
Above the crust
B
Between the crust and the lithosphere
С
Between the crust and the core
D
Beneath the core

Answers

Answer:

The mantle exists above the crust of the earth

How much power does motor provides an elevator in a building when the total mass when loaded is 500 kg to a height of 3m in 25 seconds?

Answers

I don’t know...I just need points...sorry

A long, straight, current-carrying wire runs from north to south.
a. A compass needle placed above the wire points with its north pole toward the east. In What direction is the current flowing
b. If a compass is put underneath the wire, in which direction will the compass needle point?

Answers

Answer:

a. The current is flowing from South to North. So, the current flows in the North direction

b. West

Explanation:

a. A compass needle placed above the wire points with its north pole toward the east. In What direction is the current flowing?

Using Maxwell's corkscrew rule, with the thumb of the right hand pointing in the direction of the current and the closed fingers pointing in the direction of the magnetic field.

Since the compass is placed above the wire and points east, the direction of the magnetic field at that point is east.

Since the magnetic field is tangential to the circular path around the wire, to produce an eastward magnetic field above the wire, the current must go from South to North. So, the current flows in the North direction.

b. If a compass is put underneath the wire, in which direction will the compass needle point?

If the compass is put underneath the wire, using Maxwell's corkscrew rule, since the current points northward, and the magnetic field is tangential to the circular path around the wire, the magnetic field below the wire points west.

So, the direction of the compass needle when the compass is put beneath the wire is west.

In what way does water change when condensation occurs?

from gas to liquid

from liquid to solid

from liquid to gals

from solid to liquid

Answers

from gas to liquid

please mark brainliest

A flat loop of wire consisting of a single turn of cross-sectional area 8.80 cm2 is perpendicular to a magnetic field that increases uniformly in magnitude from 0.500 T to 1.80 T in 1.10 s. What is the resulting induced current if the loop has a resistance of 2.20

Answers

Answer:

The magnitude of the induced current is 4.73 x 10⁻³ A.

Explanation:

Given;

number of turns, N = 1

cross sectional area of the loop, A = 8.8  cm² = 8.8 x 10⁻⁴ m²

change in magnetic field strength, ΔB = 1.8 T -  0.5 T = 1.3 T

change in time, Δt = 1.10 s

resistance of the loop, R = 2.2 ohm

The magnitude of the induced emf is calculated as;

[tex]emf = \frac{NA \Delta B}{\Delta t} \\\\emf = \frac{1 \times 8.8\times 10^{-4} \times 1.3}{1.10} \\\\emf = 1.04 \times 10^{-3} \ V[/tex]

The induced current in the loop is calculated as;

[tex]I = \frac{emf}{R} \\\\I = \frac{1.04 \times 10^{-3}}{2.2} \\\\I= 4.73 \times 10^{-4} \ A[/tex]

Therefore, the magnitude of the induced current is 4.73 x 10⁻³ A

Why are dominant alleles always shown as capital letters?​

Answers

Answer:

When writing a genotype, the dominant allele is usually represented by a capital letter, while the recessive allele has a lowercase letter.

Explanation:

Please mark me brainlest.

Answer:

Because in a punnett square, dominant alleles need to be differentiated from the recessive alleles, to do this, we write the dominant alleles as capital letters.

Explanation:

What is sin for the given right triangle?
8.6 meters
5 meters

6.99 meters
A. l0.71
B. 0.81
C. 0.58
D. 1.72

Answers

Answer:

C

Explanation:

sin of a right triangle is opposite divided by hypotenuse

in this case, that is 5/8.6 = 0.581395349

you can easily remember the trig functions with this acronym:

SOH-CAH-TOA

S: Sine

O: Opposite

H: Hypotenuse

C: Cosine

A: Adjacent

H: Hypotenuse

T: Tangent

O: Opposite

A: Adjacent

Explanation:

sin = Mp /0P

sin = 5/8,6

sin = 0,58

What happens when a moving object experiences no net force?

Answers

Answer:

An object with no net forces acting on it which is initially at rest will remain at rest. If it is moving, it will continue to move in a straight line with constant velocity. Forces are "pushes" or "pulls" on the object, and forces, like velocity and acceleration are vector quantities.

Each vertical line on the graph is 1 millisecond (0.001 s) of time. What is the period and
frequency of the sound waves?
Help me!!!!!

Answers

Answer:

1000 Hz

Explanation:

please mark me as brainliest

3)
An eagle carries a 330g snake to a height of 250 m.
What is the potential energy of the snake after the eagle carries it away?
-)))
A)
1,050,00)
B)
10,000
©
80.850)
D)
808.5)

Answers

Answer:

b

Explanation:

Answer:

The table shows the height y (in thousands of feet) of an unmanned aerial vehicle (UAV) x minutes after it begins its descent from cruising altitude. Minutes, x Height (thousands of feet), y 0,62 5,58 10,54 15,50

You are riding in the passenger seat of a car as it goes around a tight turn. You slide across the seat to the passenger side door. Which statement below properly describes what is happening? a. You are exerting a centripetal force on the door. b. The door and seat are exerting a centripetal force on you that balances the centrifugal force of the turn. c. The car seat exerts a centripetal force on you, but not enough to keep you in place, so the door exerts the rest. d. The centrifugal force is greater than the force of friction between you and the seat, so you slide outward.

Answers

Answer:

Explanation:

answer C looks good

there isn't really a "centrifugal " force. :/    when we are pushed "back" in a car seat.. it's not because there is a force pushing us backwards... but a force pushing us forwards.. just like when turning too,   a force pushes us into the corner,  not a force pushing out of the corner.  :)  

what are three physical properties of gases

Answers

Answer:   Gases have three characteristic properties: (1) they are easy to compress, (2) they expand to fill their containers, and (3) they occupy far more space than the liquids or solids from which they form. An internal combustion engine provides a good example of the ease with which gases can be compressed.

Explanation:

Yanni just turned one. He loves to play with his cars and trucks. He can also name the animals he sees in books.

In which stage of development is Yanni?

childhood
infancy
adolescence
adulthood

Answers

infancy
i think hope this helps

a guitar string transmits waves at 509 m/s. to create a 491 Hz note, to what length should the guitar player shorten the string?

Answers

Answer:

Wavelength = 1.04 meters

Explanation:

Given the following data;

Speed = 509m/s

Frequency = 491Hz

To find the wavelength;

Wavelength = speed/frequency

Wavelength = 509/491

Wavelength = 1.04 meters

Therefore, the guitar player should shorten the length of the string to 1.04 meters.

Answer: 0.52

Explanation:

1. What does the Work-Energy Theorem state?
Work is equal to the change in kinetic energy
Work is equal to the change in momentum
Work is equal to the change in impulse
Work is equal to the change in position

Answers

The principle of work and kinetic energy (also known as the work-energy theorem) states that the work done by the sum of all forces acting on a particle equals the change in the kinetic energy of the particle. ... Kinetic Energy: A force does work on the block. So the answer would be the first one.

The Work-Energy Theorem states that Work is equal to the change in kinetic energy, which is the first option . This theorem is an essential principle in physics and mechanics, so first option is correct.

Work (W) is a measure of the energy transferred to or from an object by a force acting on it. It is defined as the product of the force applied to the object and the displacement of the object in the direction of the force. When a force does positive work on an object, it transfers energy to the object, increasing its kinetic energy. Conversely, when a force does negative work on an object (opposite to its direction of motion), it takes energy away from the object, decreasing its kinetic energy. So, first option is correct.

Learn more about the work-energy theorem here.

https://brainly.com/question/30560150

#SPJ6

The sun warms Earth through the process of _________

conduction
convection
insulation
radiation

Answers

Radiation because yeah that’s the answer

200 Coulombs of charge passes through a point in a circuit for 0.6 minutes. what is the magnitude of the current flowing​

Answers

Answer:

5.56 A

Explanation:

From the question,

Q = it.............. Equation 1

Where Q = charges, i = current, t = time.

Make i the subject of the equation

i = Q/t.............. Equation 2

Given: Q = 200 coulombs, t = 0.6 minutes = (0.6×60) seconds

Substitite these values into equation 2

i = 200/(0.6×60)

i = 5.56 A

Hence the magnitude of the current flowing through the circuit is 5.56 A

what is the name for a force of gravity acting on an object

Answers

Answer:

Weight

Explanation:

We call it "Ralph" or "the object's weight".

10POINTS!!

A satellite orbits Earth 350 km above Earth's surface. Calculate the free-fall acceleration at this altitude.

Answers

Answer:

8.82 m/s²

Explanation:

Formula for the free fall or gravitational acceleration is;

a = GM/r²

Where;

G is gravitational constant = 6.67 × 10^(-11) m³/kg.s²

M is mass of earth = 5.972 × 10^(24) kg

r is radius of earth = 6371 km

We are given that the satellite orbits Earth 350 km above Earth's surface.

Thus, new radius = 6371 + 350 = 6721 km = 6721000 m

Thus;

a = (6.67 × 10^(-11) × 5.972 × 10^(24))/(6721000²)

a = 8.82 m/s²

When an object is raised vertically, work is done against __________. What one word completes the sentence?

please help quickly!!

Answers

Gravity Gravitational Force of Gravity

When an object is raised vertically, work is done against _gravitational force _________

What is gravitational force ?

The force of attraction between all masses in the universe; especially the attraction of the earth's mass for bodies near its surface is called gravitational force .

On every body there is a force acting named  gravitational force which attracts the body downward .

If a object / body is thrown up it always comes downward if only gravitational force is acting on it which act due to earth's gravity .

When an object is raised vertically, work is done against _gravitational force _________

learn more about  gravitational force :

https://brainly.com/question/12528243?referrer=searchResults

#SPJ2

Other Questions
TAACGCAGWhat is the order of bases that will compliment this side of a DNA strand what impact did the great migration have on the jazz agea.it brought jazz music to the Northb.it caused new dances to be made up to jazz musicc.it encouraged jazz and blues to join into one type of musicd.it disgraced families as more young people began this type of music Use your knowledge about the advantages of international trade to complete eachInternational tradeeconomic growthInternational tradethe specialization of goods.International tradethe types of goods and services available around th In the diagram shown , CD =7,DB=8, AE=5,m Stella is writing an essay and is able to write 2 pages in 16 minutes2=16?=325=? 20 POINTS TO WHO ANSWER I might quit brainly because people are just using me for my points.... could someone answer this for me?Why does every part of the body need food and oxygen delivered to it?a. The cells of the body need oxygen to make mitosis and food to make ribosomes.b. The cells of the body use the oxygen to release the energy from the food.c. The cells of the body need to make carbon dioxide out of food and oxygen.d. The cells of the body need food and oxygen for osmosis to happen. Can you please explain Number 7 with steps Please help! Its urgent!!! Which step is meiosis is shown in the image below ? Which of the is NOT a responsibility of the House of Representatives.a. Initiate spending billsb. Recommend tax billsc. Recommend a government officiald. Buy better food for the MLK High School Now consider the family of lines ax + by = c such that a, b and c are consecutive multiples of each other. what would that mean? give some examples of such lines in this family (coordinates.) what do you notice or wonder? The math department recently purchased new learning software for their freshman math classes. The instructors want to use the learning software instead of a textbook. So they decide to study the effectiveness of the software. First they test the skills and concept mastery for a number of the freshman math students. Then they randomly divide the students into two groups. One group uses the learning software for a particular lesson and the other group uses the regular textbook. Then the instructors retest all of the students and compare the improvement in the skills and concept mastery for the two groups. What is the purpose of random assignment in this experiment? Check all that apply. Rakesh car was stolen last night change into passive i need help with this please To which of the three main chemical classes does Mercury (Hg) belong?a) It's not an element in the periodic tableb) Metalloidsc) Non-metalsd) Metals Distance between the object you were looking out in the hands lens is the ____. Does this graph represent a function? Why or why not?-10 -884O A. Yes, because it passes the vertical line test.O B. Yes, because it passes the horizontal line test.C. No, because it is not a straight line.D. No, because it fails the vertical line test. Which phrase best describes the relationship indicates by the scatter plotting? Fossils are often hardened remains of organisms that once lived, such as a bone or tooth. Which characteristic of sedimentary rock makesit likely for fossils to be found in this type of rock?A. An organism's remain become hardened when covered by melted rock.B. Organisms are changed into rock by high temperature once they are no longer living.C. The remains of organisms are buried under layers of sand, shells, and bits of rock.D. The bones of an organism are pulled below Earth's surface during an earthquake. Find the value of 15/4 5/8.