A 0.180 L sample of Helium gas is at STP. If The pressure is dropped to 85.0 mmHg and the temperature is
raised to 29°C, what is the new volume?

The mass of oxygen in a 7.2 g sample of Al₂(SO₄)₃ is 3.6 g.

To determine the mass of oxygen in Al₂(SO₄)₃, we need to calculate the molar mass of Al₂(SO₄)₃ and then determine the mass fraction of oxygen.

The molar mass of Al₂(SO₄)₃ can be calculated as follows:

2(Al) + 3(S) + 12(O) = 2(26.98 g/mol) + 3(32.07 g/mol) + 12(16.00 g/mol) = 342.15 g/mol

Next, we need to determine the mass fraction of oxygen in Al₂(SO₄)₃. Oxygen constitutes 12 oxygen atoms in the compound.

Mass fraction of oxygen = (12 × molar mass of oxygen) / molar mass of Al₂(SO₄)₃

= (12 × 16.00 g/mol) / 342.15 g/mol = 0.561

Finally, we calculate the mass of oxygen in the 7.2 g sample by multiplying the mass of the sample by the mass fraction of oxygen:

Mass of oxygen = 7.2 g × 0.561 = 4.0272 g

Rounding to two significant figures, the mass of oxygen is approximately 3.6 g.

To learn more about mass, here

https://brainly.com/question/11954533

#SPJ4

The reaction equation is:Cyclopentanecarboxylic acid + NaOH → Sodium cyclopentanecarboxylate + H2OThe counterion is the sodium ion (Na+).

1. When hexanoyl chloride is treated with C6H5CO2Na, the major product formed is  C6H5CO2H. The reaction takes place through a nucleophilic substitution process. This involves the substitution of the chlorine atom in the hexanoyl chloride with the carboxylate group (-CO2Na) from sodium benzoate (C6H5CO2Na). The reaction equation is:Hexanoyl chloride + C6H5CO2Na → C6H5CO2H + CH3(CH2)4COCl + NaCl2. When cyclopentanecarboxylic acid is treated with [H+], EtOH, the major product formed is cyclopentanecarboxylic acid ethyl ester. The reaction between cyclopentanecarboxylic acid and EtOH is an esterification reaction. The reaction equation is:Cyclopentanecarboxylic acid + EtOH → Cyclopentanecarboxylic acid ethyl ester + H2O3. When cyclopentanecarboxylic acid is treated with NaOH, the major product formed is sodium cyclopentanecarboxylate. The reaction between cyclopentanecarboxylic acid and NaOH is a neutralization reaction. The reaction equation is:Cyclopentanecarboxylic acid + NaOH → Sodium cyclopentanecarboxylate + H2OThe counterion is the sodium ion (Na+).

To learn more about Cyclopentanecarboxylic visit;

https://brainly.com/question/29633468

#SPJ11

When two arrays in C contain the same elements, they may not be equal due to their different memory addresses.

This is due to the fact that when an array is created, it is assigned a memory location, and two separate arrays with identical elements are stored in different memory locations, so they are not equal. As a result, two arrays with the same elements are not considered identical.

In C, two arrays with the same elements may not be equal due to their different memory addresses. When an array is created, it is assigned a memory location, and two different arrays with the same elements are stored in different memory locations, hence they are not equal.

The reason that two arrays in C containing the same elements may not be equal is that they are stored in different memory locations when created, hence they have different memory addresses. As a result, two arrays with the same elements are not considered identical in C. To compare two arrays in C, you must use a loop to iterate through each element of the arrays, comparing each element, or use a function that compares arrays.

When comparing arrays in C, keep in mind that two arrays with the same elements are not equal due to their different memory locations. To compare arrays in C, use a loop or a function that compares arrays.

To know more about array visit:

brainly.com/question/30726504

#SPJ11

The reaction ends with two radicals colliding and forming a covalent bond.Cl• + Cl• → Cl2The mechanism of the given reaction is radical substitution that is option (g) in the answer.

The given reaction is:
NH2 + Br → NH2Br
The mechanism of this reaction is radical substitution.

The mechanism of radical substitution reactions includes three

steps: Initiation: The reaction is initiated by UV light, which produces free radicals.RCl + hν → Cl• + R•

Propagation: Free radicals react with other molecules to generate more free radicals. R• + Br2 → RBr + Br•RBr + Cl2 → RCl + Br2Termination:

To more about radical substitution mechanism of reactions Visit:

https://brainly.com/question/34200668

#SPJ11

The hydrogen sulfite ion (HSO3-) is amphiprotic. Its chemical formula is HSO3-. The acid-base character of HSO3- is very important. It can either act as an acid or as a base, depending on the reaction conditions.

This is because of the presence of one acidic hydrogen atom, and one basic sulfite ion. Thus, HSO3- can act as an acid towards water in the following balanced chemical equation:HSO3- + H2O ⇌ H3O+ + SO32-This reaction involves the transfer of a proton from the HSO3- ion to the water molecule, forming H3O+ ion and SO32- ion. This reaction is a reversible reaction that can occur in either direction, depending on the concentration of HSO3- and H3O+ ions present.

The equilibrium constant for this reaction is expressed as: K = [H3O+][SO32-] / [HSO3-][H2O]Thus, the higher the concentration of H3O+ and SO32- ions, the more the reaction will move to the left, resulting in more HSO3- and H2O molecules being formed.

In conclusion, the hydrogen sulfite ion (HSO3-) is an amphiprotic substance that can act as an acid towards water, according to the balanced chemical equation: HSO3- + H2O ⇌ H3O+ + SO32-.

To learn more about amphiprotic visit;

https://brainly.com/question/28298774

#SPJ11

1,3,5-hexatriene contains three bonding molecular orbitals.

A conjugated hydrocarbon having a chain of six carbon atoms and three double bonds is known as 1,3,5-hexatriene.

The 1,3,5-hexatriene -system, which is made up of the overlapping p-orbitals of the carbon atoms engaged in the double bonds, must be taken into account in order to calculate the number of bonding molecular orbitals (MOs) in the compound.

A string of MOs is created when the electrons in a conjugated compound, like 1,3,5-hexatriene, are delocalized along the whole chain. There are two MOs one bonding molecular orbital and one antibonding molecular orbital for every double bond.

The compound 1,3,5-hexatriene contains three double bonds. Consequently, there will be three bonding molecular orbitals.

To learn more about molecular orbitals, visit:

https://brainly.com/question/29642622

#SPJ11

Molarity refers to the concentration of a given solute in a solution expressed in moles per liter of solution. It can be calculated by dividing the number of moles of solute by the volume of the solution in liters. The molarity of the solution containing 3.50 grams of NaCl in 500 ml of solution is 0.1196 M.

The formula for calculating molarity is: M = n/V, where M is molarity, n is the number of moles of solute, and V is the volume of the solution in liters.

Given that the mass of solute NaCl is 3.50 g and the volume of solution is 500 mL, we can find the molarity of the solution as follows:

First, we need to convert the volume of the solution from milliliters to liters:500 mL = 500/1000 L = 0.5 LNext, we need to find the number of moles of NaCl using its molar mass:Molar mass of NaCl = 22.99 + 35.45 = 58.44 g/molNumber of moles of NaCl = Mass of NaCl/Molar mass of NaCl = 3.50 g/58.44 g/mol = 0.0598 molFinally, we can calculate the molarity of the solution:Molarity (M) = Number of moles (n)/Volume of solution (V) = 0.0598 mol/0.5 L = 0.1196 M

Therefore, the molarity of the solution containing 3.50 grams of NaCl in 500 ml of solution is 0.1196 M.

To learn more about molarity visit;

https://brainly.com/question/31545539

#SPJ11

Answer:AG = -TAS.

Explanation:

When the temperature is 0 K (Kelvin), the equation AG = AH - TAS simplifies to:

AG = AH - (0 * AS)

AG = AH

At absolute zero temperature (0 K), the term TAS becomes zero since the temperature (T) is multiplied by zero. Therefore, the equation simplifies to AG = AH.

This means that at 0 K, the Gibbs free energy change (AG) is equal to the enthalpy change (AH) of the system. The entropy change (AS) does not contribute to the equation at this temperature because entropy is typically related to the molecular disorder, which is not present at absolute zero.

It is important to note that the equation AG = 4S is not applicable when T = 0. The equation assumes a non-zero temperature and is based on the relationship between Gibbs free energy (AG) and entropy (S), where AG = -TAS.

The equation AG = AH - TAS represents the change in the Gibbs free energy of a system that occurs when the temperature changes from T1 to T2.

However, when the temperature is reduced to absolute zero (0 K), the entropy (S) of the system will also be reduced to zero. This is because the entropy of a substance is directly proportional to its temperature, and at 0 K, there is no thermal motion in the system.So, when T=0, AG = AH - TAS becomes:AG = AH - T(0)S = AH - 0S = AH - 0 = AHThus, at 0 K, the equation for Gibbs free energy change becomes AG = AH. It is important to note that this equation applies only to substances that have zero entropy at 0 K, such as perfectly crystalline substances.

To know more about temperature, visit:

https://brainly.com/question/7510619

#SPJ11

The balanced complete ionic equation for the reaction between MgSO4(aq) and CaCl2(aq) to form CaSO4(s) and MgCl2(aq).

The spectator ions, Mg²⁺ and 2Cl⁻, appear on both sides of the equation. They do not participate in the chemical reaction and remain unchanged.This equation represents the double displacement reaction where magnesium sulfate (MgSO4) reacts with calcium chloride (CaCl2) to produce calcium sulfate (CaSO4) as a solid precipitate and magnesium chloride (MgCl2) in aqueous form.

To know more about magnesium visit :

https://brainly.com/question/8351050

#SPJ11

0.150 moles of Al are necessary to form 80.2 g of AlBr3 from the reaction: 2 Al(s) + 3 Br2(l) → 2 AlBr3(s).

The molar mass of AlBr3 is 266.69 g/mol. To find the number of moles of AlBr3 that can be formed from 80.2 g, you can divide the given mass by the molar mass of AlBr3.

Then, using the balanced chemical equation, you can determine the number of moles of Al required to form that amount of AlBr3.

The balanced chemical equation is:2 Al(s) + 3 Br2(l) → 2 AlBr3(s)The molar mass of AlBr3 is 266.69 g/mol.Mass of AlBr3 = 80.2 g Number of moles of AlBr3 = Mass of AlBr3/Molar mass of AlBr3                                            = 80.2 g/266.69 g/mol                                            = 0.300 mol AlBr3According to the balanced chemical equation, 2 moles of Al will form 2 moles of AlBr3.

Therefore, the number of moles of Al required to form 0.300 moles of AlBr3 = 0.300 mol AlBr3 × 2 mol Al/2 mol AlBr3                                                                                                                                = 0.150 mol

Hence, 0.150 moles of Al are necessary to form 80.2 g of AlBr3 from the given reaction.

To know more about moles of Al visit-

brainly.com/question/28779381

#SPJ11

The metals, chemicals, and solder that make up the components inside electronic devices are a combination of elements that are found on the periodic table.What are the components inside electronic devices.

Electronic devices are composed of several components that are either electrical, mechanical, or software. Some of these components include transistors, capacitors, diodes, and resistors. They are usually made up of metals, plastics, ceramics, and a variety of chemicals.What are the metals, chemicals, and solder that make up the components inside electronic devices?The metals, chemicals, and solder that make up the components inside electronic devices are a combination of elements that are found on the periodic table. Metals such as gold, copper, aluminum, silver, and iron are used in various components of electronic devices. Chemicals such as acids, bases, and solvents are used in the manufacturing process of electronic devices. Solder is also used to join the various components of electronic devices together. Solder is an alloy of lead and tin that has a low melting point and can be used to bond the various components together without damaging them.

To know more about metals , visit ;

https://brainly.com/question/4701542

#SPJ11

Solubility is the amount of a substance that can dissolve in a specific solvent at a certain temperature and pressure. The solubility product constant is a chemical equilibrium constant that is used to describe the equilibrium between a solid and its corresponding dissolved ions in a solution.

This is an important concept in analytical chemistry, especially when determining the solubility of ionic compounds.In the case of SrF2, the solubility product constant expression is given by:Ksp = [Sr2+][F-]2where [Sr2+] represents the concentration of Sr2+ ions in a solution and [F-] represents the concentration of F- ions in a solution. The number "2" represents the stoichiometric coefficient of the fluoride ion in the balanced chemical equation of SrF2. The Ksp value is temperature-dependent, and it is usually given for a specific temperature. The higher the Ksp value, the more soluble the substance is in water, and the lower the Ksp value, the less soluble the substance is.

For more information on stoichiometric visit:

brainly.com/question/6907332

#SPJ11

If a solid sample of X is observed to melt, it indicates that the temperature and pressure conditions have surpassed the melting point of X.

The temperature and pressure must have exceeded the melting point of substance X if melting is seen in a solid sample of substance X. The precise temperature and pressure at which a substance changes from its solid to liquid states is known as the melting point.

The kinetic energy of the particles in the material increases with temperature. The solid transforms into a liquid when the temperature hits the melting point because there is enough energy to dissipate the intermolecular forces holding it together. The melting point is the temperature and pressure combination at which this change takes place.

Learn more about melting point:https://brainly.com/question/20551307

#SPJ4

In meteorology, there are six main pressure cells that exist in the Earth's atmosphere. These pressure cells are known as polar high-pressure cells, subpolar low-pressure cells, subtropical high-pressure cells, equatorial low-pressure cells, and two mid-latitude pressure cells, one in the northern hemisphere and the other in the southern hemisphere.

Anticyclones, or high-pressure cells, are areas where air is sinking, which creates a high-pressure system that rotates clockwise in the northern hemisphere and counterclockwise in the southern hemisphere. Cyclones, or low-pressure cells, are areas where air is rising, creating a low-pressure system that rotates counterclockwise in the northern hemisphere and clockwise in the southern hemisphere.

Therefore, the polar high-pressure cells, subtropical high-pressure cells, and mid-latitude high-pressure cells are anticyclones, while the subpolar low-pressure cells, equatorial low-pressure cells, and mid-latitude low-pressure cells are cyclones.

To learn more about meteorology, visit:

https://brainly.com/question/14243944

#SPJ11

The half-life of 218Po is 3.1 minutes. This means that half of a given amount of 218Po will decay in 3.1 minutes.

Therefore, we can use the half-life formula to determine how much of a 155-gram sample remains after 0.40 hours. The half-life formula is as follows:N = (No)(1/2)^(t/T)Where:N = the final amountNo = the initial amountt = the time elapsedT = the half-lifeLet's plug in the given values:N = (155 g)(1/2)^(0.40 hours ÷ 3.1 minutes)First, let's convert 0.40 hours to minutes:0.40 hours × 60 minutes/hour = 24 minutesNow, we can plug in all the values:N = (155 g)(1/2)^(24 min ÷ 3.1 min)N = (155 g)(1/2)^7.74193548N = (155 g)(0.005808)N = 0.89964 gTherefore, approximately 0.9 grams of a 155-gram sample remains after 0.40 hours.

To know more about decay, visit ;

https://brainly.com/question/1236735

#SPJ11

[Ca2+][CO32−] Ksp = (6.9 × 10−5 M)(6.9 × 10−5 M )Ksp = 4.761 × 10−9 mol2/L2Ksp = 4.8 × 10^−9 (to two significant figures)Therefore, the Ksp of calcium carbonate, given the molar solubility is 6.9 × 10−5 mol/L is 4.8 × 10^−9.

The Ksp of calcium carbonate, given the molar solubility is 6.9×10−5 mol/L is 4.8 × 10^−9.Calcium carbonate (CaCO3) is a sparingly soluble salt that dissociates according to the equation below:CaCO3 ⇌ Ca2+ + CO32−The solubility product constant, Ksp, for the above equilibrium is given as follows : Ksp = [Ca2+][CO32−]A saturated solution of CaCO3 at 25 °C is stated to have a molar solubility of 6.9 × 10−5 M. Because CaCO3 dissociates into one calcium ion and one carbonate ion, we may assign these molar solubilities to the two species as shown below:[Ca2+] = 6.9 × 10−5 M[CO32−] = 6.9 × 10−5 M  Substituting the molar solubility of the species into the solubility product expression :

The molar solubility of calcium carbonate is given as 6.9×10^−5 mol/L. Since the stoichiometry of the equation is 1:1 between CaCO3 and Ca2+, the equilibrium concentration of Ca2+ will also be 6.9×10^−5 mol/L.

Using the stoichiometry of the balanced equation, we can determine the equilibrium concentration of CO3^2- ions as well, which will also be 6.9×10^−5 mol/L.

The Ksp expression for calcium carbonate is:

Ksp = [Ca2+][CO32-]

Substituting the equilibrium concentrations, we get:

Ksp = (6.9×10^−5)(6.9×10^−5) = 4.761×10^−9

to know more about equilibrium, visit

https://brainly.com/question/517289

#SPJ11

The correct set of conditions for an exothermic reaction that is spontaneous at all temperatures is: Option (D)AH > 0, AS < 0, AG < 0

In thermodynamics, a reaction that is exothermic and spontaneous at all temperatures is represented by the Gibbs free energy, ΔG < 0.

According to Gibbs energy, ΔG = ΔH - TΔS, where ΔH is the enthalpy change, ΔS is the entropy change, and T is the temperature in Kelvin. For a spontaneous process, ΔG should be negative under standard conditions, that is, at a pressure of 1 atm and 25°C (298 K).Thus, for an exothermic reaction that is spontaneous at all temperatures, ΔH should be positive (since it is exothermic, AH < 0), ΔS should be negative (AS < 0), and ΔG should be negative (AG < 0) since the reaction is spontaneous.

Therefore, the set of conditions that is true for an exothermic reaction that is spontaneous at all temperatures is Option (D)AH > 0, AS < 0, AG < 0.

An exothermic reaction that is spontaneous at all temperatures is characterized by AH > 0, AS < 0, AG < 0. The positive enthalpy change indicates that the reaction releases heat to the surroundings, while the negative entropy change indicates that the system becomes more ordered. The negative Gibbs energy change indicates that the reaction is spontaneous, and the overall process proceeds towards the products. The reaction is exothermic and spontaneous at all temperatures since ΔG < 0 under standard conditions

Thus, option D is the correct answer, which states that the enthalpy change is positive (AH > 0), entropy change is negative (AS < 0), and Gibbs energy change is negative (AG < 0) for an exothermic reaction that is spontaneous at all temperatures.

To know more about exothermic reaction  visit:

brainly.com/question/18523044

#SPJ11

The electron configuration for Al is [Ne] 3s² 3p¹. The electron that is the hardest to remove is the one that has the lowest energy level and is closest to the nucleus of the atom.

Al is the chemical symbol for aluminum. It has an atomic number of 13 and is located in group 13 of the periodic table. It has three valence electrons, making it a member of the boron family.What is electron configuration?The electron configuration is a description of how the electrons in an atom are arranged. It is represented by a string of numbers and letters that indicate the energy levels, sublevels, and orbitals that the electrons occupy.What does [Ne] 3s² 3p¹ represent?The [Ne] in the electron configuration represents the electron configuration of the noble gas neon, which has an atomic number of 10 and a full valence shell. The 3s² 3p¹ represents the three valence electrons of aluminum that occupy the 3s and 3p orbitals. The electron that is the hardest to remove is the one that has the lowest energy level and is closest to the nucleus of the atom.In this case, the electron that is the hardest to remove is one of the 3p¹ electrons, which is located in the highest energy level and farthest from the nucleus.

To know more about electron, visit ;

https://brainly.com/question/860094

#SPJ11

The density of krypton gas at 0.970 atm and 43.0°C is 3.13 g/L.

Here's how to solve it: We can use the Ideal Gas Law equation to solve for density: PV = nRT

Where: P = pressure, V = volume (we'll assume a volume of 1 L since we want to solve for density), n = number of moles

R = gas constant (0.0821 L atm/mol K), T = temperature (in Kelvin).

First, we need to convert the temperature from Celsius to Kelvin:43.0°C + 273.15 = 316.15 K.

Now, we can rearrange the Ideal Gas Law equation to solve for density: density = (n x molar mass) / V.

But, we still need to solve for n:n = (PV) / RTn

[(0.970 atm)(1 L)] / [(0.0821 L atm/mol K)(316.15 K)]n = 0.0382 mol.

Now that we have n, we can solve for density: density = (n x molar mass) / Vdensity = [(0.0382 mol)(83.80 g/mol)] / (1 L)density = 3.19 g/L (rounded to two significant figures).

Therefore, the density of krypton gas at 0.970 atm and 43.0°C is 3.13 g/L (rounded to three significant figures).

To learn more about density visit;

https://brainly.com/question/29775886

#SPJ11

The 90% confidence interval for the average number of hours of sleep is (5.555 hours, 7.111 hours).

To construct the confidence interval, we use the formula:

CI = X ± (Z * (s/√n))

Where X is the sample mean, Z is the z-score corresponding to the desired confidence level (in this case, 90%), s is the sample standard deviation, and n is the sample size.

Given that X = 6.333 hours, s = 2.320 hours, and the sample size is 15, we can substitute these values into the formula.

Using the Z-table for a 90% confidence level, the z-score is approximately 1.645.

Plugging in the values, we get:

CI = 6.333 ± (1.645 * (2.320/√15))

= (5.555 hours, 7.111 hours)

Interpretation: We are 90% confident that the true average number of hours of sleep for all the professor's students falls within the range of 5.555 hours to 7.111 hours. This means that if we were to take multiple random samples from the professor's classes and construct 90% confidence intervals based on each sample, approximately 90% of those intervals would contain the true average number of hours of sleep.

To learn more about confidence interval, here

https://brainly.com/question/32546207
#SPJ4

For the value of I=1, the possible magnetic quantum numbers are -1, 0, and 1. For the value of I=2, the possible magnetic quantum numbers are -2, -1, 0, 1, and 2. For the value of I=3, the possible magnetic quantum numbers are -3, -2, -1, 0, 1, 2, and 3.

The magnetic quantum number (m) is an integer value that can range from -I to +I and determines the orientation of the orbital. This means that when the magnetic quantum number has a value of m, the orbital is oriented in such a way that it produces a magnetic field with the same direction as m.

Therefore, for the value of I=1, the possible magnetic quantum numbers are -1, 0, and 1. For the value of I=2, the possible magnetic quantum numbers are -2, -1, 0, 1, and 2. For the value of I=3, the possible magnetic quantum numbers are -3, -2, -1, 0, 1, 2, and 3.

This is because the magnetic quantum number ranges from -I to +I, where I is the spin quantum number, which has a value of 1/2 for an electron.

To know more about quantum numbers, refer

https://brainly.com/question/2292596

#SPJ11

The LD50 (Lethal Dose 50) is a measure used in toxicology to determine the lethal dose of a substance that would cause death in 50% of the test population.

However, it is important to note that conducting experiments to determine the LD50 of a substance on humans is unethical and illegal. The LD50 values are typically determined through animal testing, usually on rodents such as rats or mice.To calculate the amount of a substance that would harm a person of a certain weight, various factors need to be considered, including the toxicity of the substance and the individual's weight. In toxicology, a commonly used measure is the oral median lethal dose (LD50) expressed as milligrams per kilogram of body weight (mg/kg).To estimate the harmful dose for an individual of a certain weight, you would need to know the LD50 value of the substance and apply it to the weight of the person. The calculation involves multiplying the LD50 value by the person's weight in kilograms. However, it is crucial to emphasize that estimating harmful doses for humans based on animal LD50 values alone can be inaccurate and potentially dangerous.

It is essential to consult professionals in toxicology or poison control centers to obtain accurate information regarding the toxicity of a substance and its potential effects on human health.

for such more questions on substance

https://brainly.com/question/29108029

#SPJ8

The concentration of ammonia (NH3) in an aqueous solution with a pH of 11.00 is 1.00 × 10-3 mol/L.

Ammonia concentration of an aqueous solution with pH of 11 can be determined through the use of the formula for the dissociation of water, which is: Kw = [H3O+][OH-]Where Kw = 1.00 × 10-14 and pH = -log[H3O+].

Thus, the concentration of hydroxide ion in an aqueous solution with a pH of 11 can be determined by solving for [OH-]:pH = -log[H3O+]11.00 = -log[H3O+]H3O+ = 1.00 × 10-11mol/L Since [H3O+][OH-] = Kw= 1.00 × 10-14mol2/L2[OH-] = Kw/[H3O+][OH-] = (1.00 × 10-14mol2/L2)/(1.00 × 10-11mol/L) = 1.00 × 10-3 mol/L Therefore,

the concentration of ammonia (NH3) in an aqueous solution with a pH of 11.00 is 1.00 × 10-3 mol/L.

to know more about  ammonia visit :

https://brainly.com/question/29574773

#SPJ11

The sublimation of dry ice, or solid carbon dioxide, is a process where it transitions directly from the solid phase (s) to the gaseous phase (g) without passing through the liquid phase (l). The correct equation representing this process is:

CO2(s) ⟶ CO2(g)

The equation that represents the sublimation of dry ice, or solid carbon dioxide, is co2(s)⟶co2(g). This is because sublimation is the process of a solid changing directly into a gas without passing through the liquid phase. In the case of dry ice, it goes from a solid state directly to a gaseous state when exposed to air or heat.

This process is used in many applications, including food preservation, fire extinguishers, and medical treatments. It is important to note that the other equations listed represent different processes, such as the condensation of a gas into a liquid or the melting of a solid into a liquid. Therefore, the correct answer is co2(s)⟶co2(g).


In this equation, CO2(s) represents solid carbon dioxide (dry ice) and CO2(g) represents gaseous carbon dioxide. This conversion occurs due to the specific properties of dry ice, which allows it to undergo sublimation under normal atmospheric conditions.

To know more about sublimation visit  :

https://brainly.com/question/29304516

#SPJ11

Thus, in this reaction, carbon has a greater oxidation number of +2 in carbon monoxide (CO) compared to its oxidation number of zero in elemental lead (Pb).

In the reaction where litharge (PbO) is roasted in the presence of carbon monoxide (CO) to produce elemental lead, the carbon in carbon monoxide has a greater oxidation number compared to carbon in elemental lead.

In carbon monoxide (CO), the oxidation number of carbon is +2. This is because oxygen generally has an oxidation number of -2, and since the compound is neutral, the sum of the oxidation numbers must be zero. Therefore, the oxidation number of carbon in CO is calculated as: (+2) + (-2) = 0.On the other hand, in elemental lead (Pb), the oxidation number of carbon is zero. This is because elemental substances are considered to have an oxidation number of zero.The oxidation number reflects the electron distribution and the transfer of electrons during a chemical reaction, providing insights into the reactivity and bonding of the elements involved.

for such more questions on reaction

https://brainly.com/question/24795637

#SPJ8

Combustion of fossil fuels: The burning of coal, oil, and natural gas for energy production in power plants, industrial processes, and residential heating is a significant source of sulfur dioxide emissions.

These fuels contain sulfur compounds that are released as sulfur dioxide when burned.Industrial processes: Various industrial activities, such as metal smelting, refining, and processing, can release sulfur dioxide into the atmosphere. For example, the production of sulfuric acid and the manufacturing of paper, pulp, and chemicals can contribute to sulfur dioxide emissions.Volcanic activity: Volcanic eruptions release sulfur dioxide into the atmosphere. Volcanoes naturally emit sulfur dioxide along with other gases and particulate matter during eruptions, which can have significant short-term impacts on air quality and regional air pollution.

To know more about pollution  visit :

https://brainly.com/question/23857736

#SPJ11

Answer:

the third one

Explanation:

When you breathe in, you inhale oxygen and exhale carbon dioxide

The element that is being oxidized in the following redox reaction is C3H8O2 (aq).

Oxidation is a chemical process in which an atom or molecule loses electrons, resulting in an increase in the oxidation state or a decrease in the negative charge. Similarly, when an atom or molecule gains electrons, it undergoes reduction, resulting in a decrease in the oxidation state or an increase in the negative charge.What is Redox reaction?A redox reaction (reduction-oxidation reaction) is a chemical reaction in which atoms have their oxidation states changed. Redox reactions include all chemical reactions in which atoms undergo a change in oxidation state.

To determine whether a substance is oxidized or reduced in a chemical reaction, follow these steps: Identify the elements in the reactants and products and their oxidation numbers.

Observe the oxidation numbers of each element and check if they have changed, indicating that they have been oxidized or reduced in the reaction.

The half-reaction equation for the oxidation of C3H8O2 is:C3H8O2 → C3H2O4+ 2H++ 2e-The oxidation number of carbon in C3H8O2 is +2, and it becomes +4 in C3H2O4. As a result, carbon is oxidized, losing electrons and increasing its oxidation state.

To learn more about reaction visit;

https://brainly.com/question/30464598

#SPJ11

The balanced chemical equation for the reaction of methane (CH4) with oxygen (O2) to produce carbon dioxide (CO2) and water (H2O) is:2CH4 + 4O2 → 2CO2 + 4H2OHere, CH4 and O2 are reactants. The equation represents the combustion of methane.

Let's check off the boxes that apply to CH4.Reactants:Reactants are substances that are present at the beginning of a chemical reaction. They are used up during the reaction. In the given reaction, CH4 and O2 are reactants.The first row highlights CH4, the methane gas. Let's check off the boxes that apply to CH4:It is a gas.It is an organic compound.It is a hydrocarbon.It is a fuel.200 words:CH4 is a gas that is commonly known as natural gas. It is an organic compound because it contains carbon. Methane is a hydrocarbon, which means it contains only carbon and hydrogen atoms. Methane is a fuel because it releases energy when it undergoes combustion with oxygen. The energy is released in the form of heat and light.Methane is a potent greenhouse gas that contributes to global warming. Methane is produced by natural processes such as decomposition of organic matter, digestion by animals, and by human activities such as extraction and transport of fossil fuels. Methane emissions can be reduced by using renewable energy sources, improving energy efficiency, and reducing waste.In conclusion, CH4 is a gas that is used as a fuel. It is an organic compound and a hydrocarbon. It is a potent greenhouse gas that contributes to global warming. Methane emissions can be reduced by taking various measures.

For more information on reactants visit:

brainly.com/question/30129541

#SPJ11

To determine the number of moles of SO2 required to convert 6.8 grams of H2S, we need to consider the balanced chemical equation for the reaction between H2S and SO2. Let's assume the balanced equation.

To calculate the moles of SO2 required, we first need to convert the mass of H2S into moles using its molar mass. The molar mass of H2S is 34.08 g/mol (2 * 1.01 g/mol for hydrogen + 32.07 g/mol for sulfur).Moles of H2S = mass of H2S / molar mass of H2S

Moles of H2S = 6.8 g / 34.08 g/mol

Moles of H2S ≈ 0.199 mol (rounded to three decimal places)Since the stoichiometric ratio is 1:1 between H2S and SO2, the number of moles of SO2 required is also 0.199 mol.Therefore, 0.199 moles of SO2 are required to convert 6.8 grams of H2S.

To know more about mass visit :

https://brainly.com/question/11954533

#SPJ11