A 0.100-kg metal rod carrying a current of 15.0 A glides on two horizontal rails 0.550 m apart and 2.0 m long,
(a) If the coefficient of kinetic friction between the rod and rails is 0.120, what vertical magnetic field is required to keep the rod moving at a constant speed?
(b) If the friction between the rod and rail is reduced zero, the rod will accelerate. If the rod starts from rest at the one end of the rails, what is the speed of the rod at the other end of the rails for this frictionless situation? Use the same field value you calculated in part (a).

Answer:

-0.24diopters

Explanation:

The lens is intended that makes an object at infinity appear to be 4.2 m away, so do=infinity, dI = - 4.2m (minus sign because image is on same side of lens as object)

So 1/do +1/di = 1/f

1/infinity + 1/-4.2 = 1/f

1/f = 1/-4.2 = -0.24diopters

Answer:

d. 629 nm

Explanation:

slit separation d = .16 x 10⁻³ m

distance of screen D = 1.4 m

distance of second bright band = 11 x 10⁻³

distance of second bright band = 2 x band width

= 2 x λ D /d

Putting the values given ,

11 x 10⁻³  = 2 x λ x 1.4 /  .16 x 10⁻³

λ = 1.76 x 10⁻⁶ / 2.8

= .6285 x 10⁻⁶

= 628.5 x 10⁻⁹

= 629 nm approx .

Answer:

7km

Explanation:

The angle of depression is congruent to the angle of elevation and can be explained as angle below horizontal in which the person observing an object must view for him/her to view object's that are lower than him/her.

In angle of depression, there is assumption that object is closer to the person observing it, so there is parallel horizontal for both observing and object been observed.

hot air balloon 2 km​ high,

there exist two triangles

From trigonometry

Tanx= opposite/adjacent

Opp= 2km

Adj= X1

first triangle have base length of

Tan(16)=2/X1

X1=2/ tan(16)

X1=6.97

For Second triangle

Tanx= opposite/adjacent

Opp= 2km

Adj= X2

the other with a base length of

X2=2/tan(84)

X2=0.21

Therefore,, the total distance between the two towns is

x1+x2=6.97+0.21=7.18km

The reason for arriving at the above solutions is as follows:

The given dimensions and distance from the Earth of the Moon are;

The diameter of the Moon, d = 3,474 km

The average distance of the Moon from the Earth, R = 384,000 km

Required:

The comparison between Charon's appearance in Pluto and the Moon's appearance on Earth Earth

Solution:

The distance of the Moon's travels in an orbit, C = 2·π·R

∴ C = 2 × π × 384,000 km

The angle subtended by the Moon, θ = d/C × 360°

∴ θ = 3,474/(2 × π × 384,000) × 360° ≈ 0.518°

Pluto's moon Charon, has the following parameters;

The diameter of the Charon, d₂ = 1,186 km

The average distance of the Charon from Pluto, R₂ = 19,600 km

Therefore, the distance of the Moon's travels in an orbit, C₂ = 2·π·R₂

∴ C₂ = 2 × π × 19,600 km

The angle subtended by the Moon, θ₂ = d₂/C₂ × 360°

∴ θ₂ = 1,186/(2 × π × 19,900) × 360° ≈ 3.415°

The angle subtended by Charon in Pluto's sky ≈ 3.415°

Required:

The appearance of Charon as seen from different locations on Pluto

Solution:  

Charon is gravitationally locked to Pluto, therefore, the same side of Pluto is faced with the same side of Charon

Therefore;

Learn more about Pluto's moon Charon here:

https://brainly.com/question/3920772

https://brainly.com/question/21590852

https://brainly.com/question/17177801

B. A chemical change

Explanation:

I'm guessing ?

Answer:

objetive: a converging lens for large diameter lenses

eyepiece you must select a lens with a small focal length and the diameter is not important

The selected lenses should decrease chromatic aberration.

Explanation:

A telescope is an instrument that collects light from very distant objects, therefore very weak.

Therefore you should select a converging lens for large diameter lenses, to collect magnanimous light and with a large focal length.

For the eyepiece you must select a lens with a small focal length and the diameter is not important

the telescope magnification is

                 m = f_objective / F_ocular

The selected lenses should decrease chromatic aberration.

In general, these lenses are heavy, so refractory telescopes were imposed, so it uses a concave mirror instead of an objective lens.

Answer: this the real answer try it objetive: a converging lens for large diameter lenseseyepiece you must select a lens with a small focal length and the diameter is not importantThe selected lenses should decrease chromatic aberration.Explanation:A telescope is an instrument that collects light from very distant objects, therefore very weak.Therefore you should select a converging lens for large diameter lenses, to collect magnanimous light and with a large focal length.For the eyepiece you must select a lens with a small focal length and the diameter is not importantthe telescope magnification is                 m = f_objective / F_ocularThe selected lenses should decrease chromatic aberration.In general, these lenses are heavy, so refractory telescopes were imposed, so it uses a concave mirror instead of an objective lens.

Explanation:

Answer:

-z axis

Explanation:

According to the left hand rule for an electron in a magnetic field, hold the thumb of the left hand at a right angle to the rest of the fingers, and the rest of the fingers parallel to one another. If the thumb represents the motion of the electron, and the other fingers represent the direction of the field, then the palm will push in the direction of the force on the electron. In this case, the left hand will be held out with the thumb pointing to the right (+x axis), and the palm facing your body (-y axis). The magnetic field indicated by the other fingers will point down in the the -z axis.

Answer:

Following are the answer to this question:

Explanation:

Formula:

[tex]D(PC) =\frac{1}{parallax}\\\\D(av)=D(PC) \times 20.626\ J[/tex]

Calculating point A:

when the value is [tex]0.38[/tex]

[tex]\to 0.38 \toD(PC)= \frac{1}{0.38}\\\\[/tex]

                   [tex]=2.632[/tex]

[tex]\to D(a.v) = \frac{1}{0.38} \times 206265\\[/tex]

               [tex]=542,802.6[/tex]

Calculating point B:

when the value is [tex]0.75[/tex]

[tex]\to D(PC)=\frac{1}{0.75}[/tex]

                [tex]=1.33[/tex]

[tex]\to D(a.v) = \frac{1}{0.75} \times 206265\\[/tex]

             [tex]=275,020[/tex]

Calculating point C:

when the value is [tex]0.28[/tex]

[tex]\to D(PC)=\frac{1}{0.28}[/tex]

                [tex]=3.571[/tex]

[tex]\to D(a.v) = \frac{1}{0.28} \times 206265\\[/tex]

               [tex]=736660.7[/tex]

Calculating point D:

when the value is [tex]0.42[/tex]

[tex]\to D(PC)=\frac{1}{0.42}[/tex]

                [tex]=2.38[/tex]

[tex]\to D(a.v) = \frac{1}{0.42} \times 206265\\[/tex]

               [tex]=490910.7[/tex]

Calculating point E:

when the value is [tex]0.31[/tex]

[tex]\to D(PC)=\frac{1}{0.31}[/tex]

                [tex]=3.226[/tex]

[tex]\to D(a.v) = \frac{1}{0.31} \times 206265\\[/tex]

               [tex]=665370.97[/tex]

Answer:

L = Pt/M

Explanation:

Power, P= Q/t = mL/t

​

we know that, (Q=m×l)

Now ⇒l= Pt/M

​

Thus l= Pt/M

​

Answer:

Wavelength is 471 nm

Explanation:

Given that,

Lines per unit length of diffraction grating is 500 lines/mm.

The third maxima from the central maxima (m=3) is at an angle of 45°

We need to find the color of laser light shines through a diffraction grating.

The condition for maxima is :

[tex]d\sin\theta=m\lambda[/tex]

d = 1/N, N = number of lines per mm

[tex]\lambda=\dfrac{1}{Nm}\sin\theta\\\\\lambda=\dfrac{10^{-3}}{500\times 3}\sin(45)\\\\\lambda=4.31\times 10^{-7}\\\\\text{or}\\\\\lambda=471\ nm[/tex]

Answer:

24

Explanation:

The mass = 3 kg

at point O all the mechanical energy of the system is due to its potential energy PE. The body is at rest.

PE = mgh

but ME = PE + KE = constant   (law of energy conservation)

KE is the kinetic energy

since KE is zero at this point, then,

ME = mgh

where m is the mass

g is acceleration due to gravity = 9.81 m/s^2

h is the height = O

ME = 3 x 9.81 x O

ME = 29.43-O

At point A the total ME is due to its PE and its kE

PE at this point = mgh = 3 x 9.81 x A = 29.43-A

KE = [tex]\frac{1}{2}mv^{2}[/tex]

velocity = v at this point, therefore,

KE = [tex]\frac{1}{2}*3*v^{2}[/tex] = [tex]\frac{3}{2} }v^{2}[/tex]

therefore,

ME = 29.43-A + [tex]\frac{3}{2} }v^{2}[/tex]

Equating ME for the points O and A, we have

29.43-O = 29.43-A + [tex]\frac{3}{2} }v^{2}[/tex]

29.43-O - 29.43-A = [tex]\frac{3}{2} }v^{2}[/tex]

(O - A)29.43 = [tex]\frac{3}{2} }v^{2}[/tex]

O - A = 0.051[tex]v^{2}[/tex]   this is the distance between point O and A

For point B

PE = 29.43-B

KE = [tex]\frac{25}{2}*3*v^{2}[/tex] = 37.5[tex]v^{2}[/tex]        (velocity is equal to [tex]5v[/tex] at this point)

therefore,

ME = 29.43-B + 37.5[tex]v^{2}[/tex]

Equating the ME for points A and B, we have

29.43-A + [tex]\frac{3}{2} }v^{2}[/tex] = 29.43-B + 37.5[tex]v^{2}[/tex]

29.43-A - 29.43-B = 37.5[tex]v^{2}[/tex] - [tex]\frac{3}{2} }v^{2}[/tex]

(A - B)29.43 = 36[tex]v^{2}[/tex]

A - B = 1.22[tex]v^{2}[/tex]    this is the distance between points A and B

The distance between points A & B divided by the distance between points 0 & A will be

1.22[tex]v^{2}[/tex]/0.051 = 23.9 ≅ 24

Answer:

B. the bright fringes get brighter and the dark ones get darker

Explanation:

Let us consider when the intensities are equal, we use the equation

[tex]I_{max} = I_{1} + I_{2} + 2\sqrt{I*I}[/tex]     for light fringes and,

[tex]I_{min} = I_{1} + I_{2} - 2\sqrt{I*I}[/tex]     for dark fringes  

where [tex]I_{1}[/tex] and [tex]I_{1}[/tex] are the light intensities from the first and second slits respectively.

For the first case where the light from the two slits have the same intensities, we can say both have intensity [tex]I[/tex]

[tex]I_{max} = I + I + 2\sqrt{I*I}[/tex] = [tex]2I + 2I = 4I[/tex]

[tex]I_{min} = I + I - 2\sqrt{I*I} = 2I - 2I = 0[/tex]

For the case where one of the intensities has half the intensity of the other.

one has intensity [tex]I[/tex] and the other one has intensity [tex]\frac{I}{2}[/tex]

inserting, we have

[tex]I_{max} = I + \frac{I}{2} + 2\sqrt{I*\frac{I}{2}} = 2.932I[/tex]

[tex]I_{min} = I + \frac{I}{2} - 2\sqrt{I*\frac{I}{2}} = 0.068I[/tex]

this shows that the bright fringes get brighter and the dark ones get darker.

Answer:

The rate of doing work is called power.

Answer:

The amount of energy transported or transformed per unit time is referred to as power in physics. The watt, which is equal to one joule per second in the International System of Units, is the unit of power.

OAmalOHopeO

Answer:

D. A convex lens in air

Explanation:

This is because the air tight plastic under water will reflect light rays in the same manner as a convex lens

Answer:

8 seconds

160 meters

Explanation:

Given in the y direction:

Δy = 0 m

v₀ = 40 m/s

a = -10 m/s²

Find: t

Δy = v₀ t + ½ at²

0 m = (40 m/s) t + ½ (-10 m/s²) t²

0 = 40t − 5t²

0 = 5t (8 − t)

t = 0 or 8

Given in the x direction:

v₀ = 20 m/s

a = 0 m/s²

t = 8 s

Find: Δx

Δx = v₀ t + ½ at²

Δx = (20 m/s) (8 s) + ½ (0 m/s²) (8 s)²

Δx = 160 m

Answer:

c : it wil be cut in half.

The pattern is formed on a distant screen so we can use the Fraunhofer difracction for a single slit. The formula of the width of the central bright spot is given by Δx = (2λz)/a, where λ is the wavelength and a is the width of the slit. So if the inicial width (a_1) is doubled (a_2= 2 x a_1),the width of the central spot will be cut in half Δx = (2λz)/a_2 = (2λz)/2xa_1 .

Answer:

External force    W₁ = F L

Friction force    W₂ = - fr L

weight component   W₃ = - mg sin θ L

Y Axis   Force      W=0

Explanation:

When the block rises up the plane with constant velocity, it implies that the sum of the forces is zero.

For these exercises it is indicated to create a reference system with the x axis parallel to the plane and the y axis perpendicular

let's write the equations of translational equilibrium in given exercise

X axis

        F - fr -Wₓ = 0

        F = fr + Wₓ

the components of the weight can be found using trigonometry

         Wₓ = W sin θ

         [tex]W_{y}[/tex] = W cos θ

let's look for the work of these three forces

          W = F x cos θ

External force

          W₁ = F L

since the displacement and the force have the same direction

Friction force

          W₂ = - fr L

since the friction force is in the opposite direction to the displacement

For the weight component

          W₃ = - mg sin θ L

because the weight component is contrary to displacement

Y Axis  

          N- Wy = 0

in this case the forces are perpendicular to the displacement, the angle is 90º and the cosine 90 = 0

therefore work is worth zero

Answer:

E. Coefficient of linear expansion

Answer:

Explanation:

Given data

mass of canister= 3.4 kg

force acting on canister= 3 N

initial velocity u= 2.5 m/s

final velocity v= 4.8 m/s

The work done on the canister is the change in kinetic energy on the canister

change in [tex]KE= Kfinal- Kinitial[/tex]

K.E initial

[tex]Kintial= \frac{1}{2} mv^2\\\\Kintial= \frac{1}{2}*2*2.5^2\\\\KInitial= \frac{1}{2} *2*6.25\\\\Kinitial= 6.25J[/tex]

K.E final

[tex]Kfinal= \frac{1}{2} mv^2\\\\ Kfinal= \frac{1}{2}*2*4.8^2\\\\ Kfinal= \frac{1}{2} *2*23.04\\\\ Kfinal= 23.04J[/tex]

The net work done is [tex]KE= Kfinal- Kinitial[/tex]

[tex]W net= 23.04-6.25= 16.79J[/tex]

Answer:

The electric field is [tex]E = 5.25 V/m[/tex]

Explanation:

From the question we are told that

    The peak magnitude of the magnetic field is  [tex]B = 17.5 nT = 17.5 *10^{-9}\ T[/tex]

Generally the peak magnitude of the electric field is mathematically represented as

         [tex]E = c * B[/tex]

Where c is the speed of light with value [tex]c = 3.0 *10^{8} \ m/s[/tex]

So

       [tex]E = 3.0 *10^{8} * 17.5 *10^{-9}[/tex]

       [tex]E = 5.25 V/m[/tex]

The peak magnitude of the electric field will be "5.25 V/m".

According to the question,

Magnetic field's peak magnitude, B = 17.5 nT or,

                                                           = 17.5 × 10⁻⁹ T

Speed of light, c = 3.0 × 10⁸ m/s

We know the relation,

→ E = c × B

By substituting the values, we get

      = 3.0 × 10⁸ × 17.5 × 10⁻⁹

      = 5.25 V/m

Thus the above approach is appropriate.

Find out more information about magnetic field here:

https://brainly.com/question/26257705

Explanation:

Pressure is the same for both plungers.

P = P

F / A = F / A

F / (¼ π d²) = F / (¼ π d²)

F / d² = F / d²

5 N / (0.05 m)² = F / (1 m)²

F = 2000 N

None of the options are correct.

Answer:

Explanation:

For the car to turn at the about the centripetal force must not be greater than the static friction between the tires and the road

we will use the expression relating centripetal force and static friction below

let U represent the coefficient of static friction

Given that

U= 0.50

mass m= 1200-kg

radius r= 94.0 m

Assuming g= 9.81 m/s^2

[tex]U*m*g=\frac{mv^2}{r}[/tex]

[tex]U*g=\frac{v^2}{r}[/tex]

substituting our given data in to expression we can solve for the speed V

[tex]0.5*9.81=\frac{v^2}{94}[/tex]

making v the subject of formula we have

[tex]0.5*9.81=\frac{v^2}{94}\\\v= \sqrt{0.5*9.81*94} \\\\v= \sqrt{461.07} \\\\v= 21.47[/tex]

v= 21.47m/s

hence the maximum velocity of the car is 21.47m/s

Answer:

10 - 20 million years ago

Answer:

a) 1.35 x 10^11 m

b) 0.53 µs

c) 8 ns

Explanation:

Radar involves the use of radio wave which has speed c = 3 x 10^8 m/s

a) for 900 s,

The distance for a round trip = v x t

==>  (3 x 10^8) x 900 =  2.7 x 10^11 m

The distance of Venus is half this round trip distance = (2.7 x 10^11)/2 = 1.35 x 10^11 m

b) for a 80.0 m distance of the car from the radar source, the radar will travel a total distance of

d = 2 x 80 = 160 m

the time taken = d/c = 160/(3 x 10^8) = 5.3 x 10^-7 s = 0.53 µs

c) accuracy in distance Δd = 11.5 m

Δt = accuracy in time = Δd/c = 11.5/(3 x 10^8) = 3.8 x 10^-8 = 38 ns

Answer:

The  value is  [tex]N = 3.708*10^{7} \ \ atoms[/tex]

Explanation:

From the question we are told that

    The pressure is  [tex]P = 1.53 *10^{-7} \ N/m^2[/tex]

    The  temperature is  [tex]T = 26 + 273 = 299 \ K[/tex]

     The volume is  1 cubic cm = [tex]1 * 10^{-6} m^3[/tex]

Generally according to the ideal gas law we have that

      [tex]PV = NkT[/tex]

here  k is the Boltzmann constant with a value  [tex]k = 1.38 *10^{-23} \ J/K[/tex]

  =>  [tex]N = \frac{PV}{ k T}[/tex]

=>     [tex]N = \frac{ 1.53 *10^{-7} * (1* 10^{-6})}{ 1.38*10^{-23} * 299}[/tex]

=>    [tex]N = 3.708*10^{7} \ \ atoms[/tex]

Answer:

     I₂ = 143.79

Explanation:

To solve this problem, work them in two parts. A first one where we look for the intensity of the incident light in the set and a second one where we silence the light transmuted by the other set,

Let's start with the set of three curling irons

Beautiful light falls on the first polarized is not polarized, therefore only half the radiation passes

              I₁ = I₀ / 2

this light reaches the second polarized and must comply with the Mule law

             I₂ = I₁ cos² tea

The angle between the first polarized and the second is Tea = 29.0º

             I₂ = I / 2 cos² 29

The light that comes out of the third polarized is

              I₃ = I₂ cos² tea

the angle between the third - second polarizer is

             tea = 58-29

             tea = 29th

               I3 = (I₀ / 2 cos² 29) cos² 29

indicate the output intensity

                I3 = 110

we clear

              I₀ = 2I3 / cos4 29

              I₀ = 2 110 / cos4 29

              I₀ = 375.96 W / cm²

Now we have the incident intensity in the new set of three polarizers

back to the for the first polarizer

                 I₁ = I₀ / 2

when passing the second polarizer

                     I₂ = I1 cos² 29

                    I2 = IO /2 cos²29

let's calculate

                I₂ = 375.96 / 2 cos² 29

               I₂ = 143.79

Answer:

Conventions used in SI to indicate units are as follows:

Answer:

The acceleration due to gravity of Jupiter is 25 m/s^2. means that, Any object dropped near Jupiter's Surface will accelerate downward (towards the Jupiter's surface) at the rate of 25 m/s^2 due to the gravity of Jupiter

Explanation:

hope it's help

Answer:

Explanation:

If any object is dropped from a height above the Jupiter's surface the object will fall towards jupiter's surface with a constant acceleration of 25m/s^2.

Answer:

Explanation:

change in magnetic flux = .16 x .16 x .510 - 0

= .013056 weber .

rate of change of flux = change in flux / time

= .013056 / 40.5 x 10⁻³

= .32237

voltage induced = .32237 V

electrical energy dissipated = v² / R where v is voltage , R is resistance

= .32237² / 6.35

= 16.36 x 10⁻³ J .

As the box compresses the spring, the spring performs

-1/2 (85 N/m) (0.065 m)² ≈ -0.18 J

of work on the box. By the work energy theorem, the total work performed on the box (which is done only by the spring since there's no friction) is equal to the change in the box's kinetic energy. At full compression, the box has zero instantaneous speed, so

W = ∆K   ==>   -0.18 J = 0 - 1/2 (2.5 kg) v ²

where v is the box's speed when it first comes into contact with the spring. Solve for v :

v ² ≈ 0.14 m²/s²   ==>   v ≈ 0.38 m/s