Answer:
“An OSHA 300 log is where companies record the injuries that occur at the workplace,” said Luna. “By law, they have to report all the injuries to OSHA.” The OSHA law gives workers and their unions the right to have access to injury logs.
The purpose of the 300 Log is to record job-related injuries and illnesses. Thus, the correct option for this question is C.
What do you mean by 300 Log?300 Log may be defined as a type of OSHA form for employers that specifically record all types of reportable injuries and illnesses that may take place in the workplace, where and when they occur.
It also collects the nature of the case, the name and job title of the employee injured or made sick, and the number of days away from work or on restricted or light duty, if any.
It represents the record which is maintained by the employer of recordable injuries and illnesses that occur on the job position. It facilitates numerous advantages for the employee and their families.
Therefore, the purpose of the 300 Log is to record job-related injuries and illnesses. Thus, the correct option for this question is C.
To learn more about OSHA 300 Log, refer to the link:
https://brainly.com/question/2356475
#SPJ2
It is ___ for motorcyclists to ride more than two abreast in a lane.
O legal
O illegal
O recommended
O unconstitutional
It is illegal for motorcyclists to ride more than two abreast in a lane. Thus, the correct option for this question is B.
What are the rules for motorcyclists?According to the laws, there are numerous rules that have to be followed by each and every motorcyclist. But the most important on for them is that they need to wear a helmet while riding. Other safety gadgets are also required to wear.
According to the context of this question, it is not legal for motorcyclists to ride more than two abreast in a lane. This is because this action gives the invitation to road accidents where a lot of people have died. So, in order to increase the safety and security, it is illegal.
Therefore, it is illegal for motorcyclists to ride more than two abreast in a lane. Thus, the correct option for this question is B.
To learn more about Motorcyclists, refer to the link:
https://brainly.com/question/24732604
#SPJ2
Why is it important for a civil engineer to understand structural forces?
Answer:
Structural design plays an important role in construction projects. ... Civil engineers use structural analysis to assess the forces that could act on a structure and to choose materials and reinforcements that will effectively withstand those forces.
Explanation:
Manufacturers frequently make choices about their suppliers of raw materials based on their impact on society and the environment.
Examples include the use of recyclable components, fair trade textiles and biodegradable packaging.
Discuss how these choices may improve the ethical image of a company
These decisions may greatly enhance a company's reputation for ethics since consumers are drawn to businesses that provide items that are both efficient and environmentally beneficial.
What are Recyclable components?Recyclable materials are those that would ordinarily be disposed of as municipal waste but can instead be collected, processed, or separated before being returned to the market as products or raw materials.
Today's consumers must be reflected on the back of products that are neither more nor less destructive to the environment as time progresses. With the assistance of governmental programs, this psychology changes.
As a result, practically all produced goods have a natural capacity for biodegradation. And at this point, a business that creates more biodegradable goods is seen with respect.
Thus, These decisions may greatly enhance a company's reputation for ethics.
For more information about Recyclable components, click here:
https://brainly.com/question/28670103
#SPJ2
Two technicians are discussing battery load testing. Technician A says that if the battery fails the load test, it is bad and
should be replaced. Technician B says if it fails the load test, it should be fully charged and the test repeated. Who is
correct?
Select one:
a. Technician A
b. Technician B
o
c. Both Technicians A and B
O
d. Neither Technician A nor B
Answer:
The correct technician is;
b. Technician B
Explanation:
During battery load testing, the amperes produced by a battery that is at least 75 percent charged when a load tester applies a calibrated load of half the cold cranking amp rating of the battery for 15 seconds is measured. A battery that gives a voltage reading of above 9.6 volts all through the test is a good battery. However, if the voltage reading goes lower than 9.6 volts at about the end of the test, the battery could be 'bad', or may require recharging and retesting, where it was not on full charge before the test
Therefore, Technician B is correct
Identify five safety hazards that should be included in the design of the school
Answer:
1) function of fire doors and making sure theyre properly wired to fire alarms
2) proper water piping and purifaction for water fountains and sinks.
3) falty sprinkler systems/rsuty sprikler systems that wont work
4) weather durable roofing and walls for storms and snow depending on were your located .
5) rsuted pipes in showers or fountains that could give you tetnus or other disaeases
Explanation:
HOPE THIS HELPS good luck!!
does it matter what materials you use in your circuit? explain why.
How can you use the IPDE Process to help protect motorcyclists while driving?
IPDE process can be helped in protecting motorcyclists while driving by recognizing when a motorbike is present, and anticipating what it will do next.
What is IPDE?The IPDE is a semistructured clinical interview that enables a systematic and accurate assessment of personality traits as well as the identification of key categories of personality disorders. It is distinctive in that it safeguards trustworthy information in various cultural contexts.
To deal with anticipated and actual threats, we employ the IPDE (Identify, Predict, Decide, Execute) approach when driving. The four steps are outlined by IPDE.
I can locate potential risks in the driving environment. P—Predict—Judge the locations of potential sites of contention. D—Decide—Decide what to do, when to do it, and where to do it. E—Execute—Act by adjusting the car's course to prevent collisions.
Thus, by selecting how to respond to the other driver's decision, and enforcing that decision, you can use the IPDE process to protect motorcyclists while driving.
To learn more about IPDE, refer to the link:
https://brainly.com/question/28047558
#SPJ2
Which type of engineer works with chemicals to develop safety precautions, repairs chemical manufacturing equipment, and creates processes to work with liquids and gases?
Answer:
Chemical engineer.
Explanation:
A Bachelor's degree refers to an academic degree (certificate) awarded to a student by a tertiary institution (university or college) after the completion of his or her educational programme. Bachelor's degree is generally being referred to as first degree because it is the first certification to be acquired by an undergraduate student after the completion of his or her course of study. Mostly, a bachelor’s degree program lasts for four (4) years and in some cases it is typically for five (5) years.
The second (next) degree a graduate obtains after the acquisition of a first degree (bachelor degree) is the master's degree. The advantage of a master degree is that, it can be obtained in a different academic field such as science, engineering, education etc.
Basically, a graduate is awarded a degree certificate in a specific course of study after the completion of a bachelor's degree program such as biochemistry, mathematics, electrical engineering, chemical engineering, etc.
A chemical engineer is an engineer who works with chemicals to develop safety precautions, repairs chemical manufacturing equipment, and creates processes to work with liquids and gases. Thus, they are saddled with the responsibility of studying and experimenting with various chemical elements and compounds.
Answer:
Chemical Engineer
Explanation:
EDGE 2021 :D got it right
What is another term for an actuator of a control system?
A system sensor
B. system detector
C. system regulator
D. system controller
Answer:
the answer is. D system controller
Explanation:
click the picture for the correct answer
Name safety hazards that should be included in the design of a school
Answer:
Environmental
Explanation:
weather , noise, heat ect
How does the local economy influence behavior?
What do we mean by the "precision" of a measuring instrument?
special certification is required for technicians who handle which of the following systems?
Answer:
Explanation:. if the required charge level of refrigerant for MVAC system is 40 ounces which ... A technician who's successfully completes the training and certification on an ... Special service procedures to disable the high voltage system prior to service.
You must yield the right-of-way to all of the following EXCEPT:
Police cars with flashing lights
Fire trucks with flashing lights
Ambulances with flashing lights
O None of the above
Answer:
You must yield the right-of-way to a police car, fire engine, ambulance, or other emergency vehicle that uses a siren and flashing lights. Pull as close to the right of the road as possible and stop until the emergency vehicle(s) has passed. However, don't stop in an intersection because that would cause a wreck.
Explanation:
please have a good day. and also mark as brainllest bye
[o]-[o]
\___/
5. Will rotating the tires extend their life?
O Yes
O No
Answer:
yes
Explanation:
it will extend there usability cause the tread will wear down in one direction cause its only spinning that way. but is you have directional tread than I guess not.
The Clean Air Act Amendments of 1990 prohibit service-related releases of all ________.
A) OzoneB) GasC) MercuryD) Refrigerants
Answer:
D) Refrigerants.
Explanation:
Refrigerants refers to any chemical substance that undergoes a phase change (liquid and gas) so as to enable the cooling and freezing of materials. They are typically used in air conditioners, refrigerators, water dispensers, etc.
In the United States of America, the agency which was established by US Congress and saddled with the responsibility of overseeing all aspects of pollution, environmental clean up, pesticide use, contamination, and hazardous waste spills is the Environmental Protection Agency (EPA). Also, EPA research solutions, policy development, and enforcement of regulations through the resource Conservation and Recovery Act .
The Clean Air Act Amendments of 1990 prohibit service-related releases of all refrigerants such as R-12 and R-134a. This ban became effective on the 1st of January, 1993.
The Clean Air Act Amendments of 1990 prohibits any service-related to releases of all Refrigerants.
What is Refrigerants?Refrigerants means any chemical substance that undergoes a phase change (liquid and gas) so as to enable the cooling and freezing of materials.
Any form of Refrigerants are known for releasing harmful substances in the air.
The Clean Air Act Amendments aims to reduce acid rain and improve public health by reducing emissions of sulfur dioxide (SO2) and oxides of nitrogen (NOx).
Hence, the Clean Air Act Amendments of 1990 prohibits any service-related to releases of all Refrigerants.
Therefore, the Option D is correct.
Read more about Clean Air Act
brainly.com/question/9265702
When testing the voltage drop on the positive side of the starter circuit (high current side), connect the red voltmeter lead to:
Select one:
tot
a. the input of the starter motor.
O
b. the battery negative post.
c. the "S" terminal of the solenoid.
0
d. the battery positive post.
Javier is well versed in computer-aided design and is adept at spatial reasoning. What other skill would be
most important to employers if he were applying for a job as a civil engineer?
O knowledge of economic indicators
chemical and material science
O surveying and cartography
O marketing and advertising
According to o*net what are the three most common levels of education held by general and operations managers?
Answer:
B,D,E
Explanation:
Which type of power system should Gavin use to create the device in the following scenario?
Gavin is designing a device that must rely on precise movements. It must have the force to cut through metal yet be safe enough for one person to hold steady on his or her own.
a hydraulic system similar to one used in a dump truck
a propulsion system similar to one used in a jet plane
a fluid power system similar to one used in a pool pump
a pneumatic power system similar to one used in a jackhammer
Answer:
a pneumatic power system similar to one used in a jackhammer
Explanation:
The correct answer is a hydraulic system. A hydraulic system allows fluids to distribute force evenly. Since fluids distribute force and pressure equally throughout a system, they can be connected through pipes and regulated by valves to increase volume and pressure in the system. This allows the fluid flow to magnify the initial force or power in the system.
Can anyone explain what the effects of positive and negative camber, toe angle, and caster on front-wheel-drive, rear-wheel drive, all-wheel drive, and 4 wheel drive cars, trucks, and SUVs are? Please include examples.
A positive camber is good for keeping a recreational vehicle stable, while the negative camber is better for allowing high performance vehicles to have a better ability to turn corners faster and accurately. The toe angle affects directional control, turning response and tire tread life. Toe-related tread wear will cause a "feathering" wear pattern across the tread. If too much toe-in is present, the feathering will angle toward the center of the vehicle. Increasing the amount of positive caster will increase steering effort and straight line tracking, as well as improve high speed stability and cornering effectiveness. Positive caster also increases tire lean when cornering (almost like having more negative camber) as the steering angle is increased.
Using the Fundamental Canons of the NSPE Code of Ethics craft a 10 sentence response detailing whether or not the engineer is
acting ethically, why their actions are ethical or not, and what actions, if any, should they take to correct their potentially unethical
behavior. Provide evidence from the Fundamental Canons and justify your response with clear reasoning.
Engineer A received a Bachelor of Science degree in 1940 from a recognized engineering curriculum and subsequently was registered as a
professional engineer in two states. Later, he was awarded an earned "Professional Degree from the same institution. In 1960, he received a Ph.D.
degree from an organization that awards degrees on the basis of correspondence without requiring any form of personal attendance or study at the
institution and is regarded by state authorities as a diploma mill." Engineer A has since listed his Ph.D. degree among his academic qualifications in
brochures, correspondence, and otherwise, without indicating its nature.
Answer:
by the feed of your answer is 67
Explanation: because of your dynamics
Who wants me to make a device to resurrect Juice Wrld
Does anybody know how to take a screenshot on a HP pavilion computer?
Answer:
I do i do it everyday
Explanation:
Press windows and prt sc at the same time
Which examples best demonstrate likely tasks for Health, Safety, and Environmental Assurance workers? check all that apply
A. Sam
B. Fiona
C. Elijah
D. Joy
E. Hong
F. Shantelle
(((ANSWER: Sam, Elijah, and Joy)))
Sam, Elijah, Joy Those are 100% correct from my human knowledge
Answer:
i just did the thing on edge
Explanation:
The largest force that impacts
resource technology is which of the
following?
A. Funding
B. The environment
C. Agriculture
Answer:
I think either Agriculture (C) or Funding (A) but, , , , I think I’ll go with Agriculture (C) :)
Explanation:
Agriculture’s definition is : “the science or practice of farming, including cultivation of the soil for the growing of crops and the rearing of animals to provide food, wool, and other products.”
and since resource technology is technology that helps out with resources, agriculture would be a more reasonable answer to pick out.
Answer:
B. The environmentExplanation:
i just did it on acellus
what information in drawing's title block identifies the project?
A. Sheet title
B. Company logo
C. Drawing number
D. Revision block
Answer:
B would b your answer
Explanation:
have a great day. please mark as brainllest
[o]-[o]
\___/
The information in a drawing's title block that identifies the project is the Drawing Number. The correct option is C.
The unique identification code given to a drawing is called a drawing number, and it is typically used in accordance with a standardised numbering scheme within a company or project.
The drawing number aids in distinctly identifying the drawing and connecting it to the particular project to which it belongs. It enables simple drawing organisation, retrieval, and referencing within a project or document control system.
The Drawing Number is the primary identifier that directly connects the drawing to the project it represents, even though other elements like the Sheet Title, Company Logo, and Revision Block may provide additional information such as the purpose of the drawing.
Thus, the correct option is C.
For more details regarding projects, visit:
https://brainly.com/question/28476409
#SPJ6
Imagine that you are the architect that designed the school. Identify five safety hazards that should be included in the design of the school; that is safety measures that must be included in the design of the school making it safe to students and teachers and all other persons that will use the school.
Answer:
Access for physically disabled students and staff, fire hazards / fire escape hazards for stairs and elevators, emergency escapes...and that's all I can think of.
what is the difference between a 1969 and 1970 dodge charger
Which of the following placards allows a driver to park in a handicapped parking space.
0 Temporary disability
O Permanent disability
O Disabled veteran
O All of the above
The placards that allows a driver to park in a handicapped parking space is D. All of the above
How to explain the informationA placard that allows a driver to park in a handicapped parking space is issued to people with a temporary or permanent disability, or to disabled veterans. The placard must be displayed in the vehicle's windshield when parking in a handicapped parking space.
The placards are usually blue or red, and they have the International Symbol of Access (ISA) on them. The ISA is a wheelchair symbol that is used to identify accessible facilities and services.
It is important to note that you cannot park in a handicapped parking space without a valid placard. If you are caught parking in a handicapped parking space without a valid placard, you could be fined.
Learn more about disability
https://brainly.com/question/30559911
#SPJ2