Answer:
THE SPECIFIC HEAT OF THE METAL IS 0.4843 J/G °C
Explanation:
Heat involved in the reaction is 169.5 J
mass of the metal = 10 g
Change in temperature = 60 °C - 25 °C = 35 °C
Specific heat of the metal = unknown
Specific heat of a metal or substance is the amount of heat per unit mass required to raise the temperature by one degree Celsius.
Using the formula for heat of a reaction, which is:
Heat = mass * specific heat * change in temperature
Heat = m C ΔT
Re-arranging the formula by making C the subject of the formula, we get:
C = Heat / m ΔT
C = 169.5 J / 10 g * 35 C
C = 169.5 J / 350 g °C
C = 0.4843 J/g°C
So therefore, the specific heat of the metal is 0.4843 J/ g°C
Type Calculations. Given the balanced equation: 2 Al + 3 H2SO4---> Al2(SO4)3 + 3 H2 Molar mass (g/mol): Al=26.98; H2SO4=98.08; Al2(SO4)3= 342.15; H2=2.02 A) How many mole of H2 gas can be produced when 33.8 g of Al are consumed? B) When 1.60 mol of H2SO4 are used in a reaction, how many grams of Al2(SO4)3 can be produced? C) For part B,if actual yield for Al2(SO4)3 is 100.0 g, what is percent yield?
Answer:
A. 1.88 mol H₂
B. 182 g Al₂(SO₄)₃
C. 54.8%
Explanation:
2 Al + 3 H₂SO₄ ⇒ Al₂(SO₄)₃ + 3 H₂
A. Convert grams of Al to moles. The molar mass is 26.98 g/mol.
(33.8 g)/(26.98 g/mol) = 1.253 mol Al
Use stoichiometry to convert moles of Al to moles of H₂. Looking at the equation, you can see that for every 2 mol of Al consumed, 3 moles of H₂ is produced. Use this relationship.
(1.253 mol Al) × (3 mol H₂)/(2 mol Al) = 1.879 mol H₂
You will produce 1.88 mol of H₂ gas.
B. Again, use stoichiometry. For every 3 moles of H₂SO₄ consumed, 1 mole of Al₂(SO₄)₃ is produced.
(1.60 mol H₂SO₄) × (1 mol Al₂(SO₄)₃/3 mol H₂SO₄) = 0.533 mol Al₂(SO₄)₃
Convert moles of Al₂(SO₄)₃ to grams. The molar mass is 342.15 g/mol.
(0.533 mol) × (342.15 g/mol) = 182.48 g Al₂(SO₄)₃
You will produce 182 g of Al₂(SO₄)₃.
C. Calculate percent yield by dividing the actual yield by the theoretical yield. Multiply by 100%.
(100.0/182.48) × 100% = 54.8%
The percent yield is 54.8%.
Which products are formed when aluminum is added to a silver chlorine solution?
Answer:
Alcl3 and Cl2
Explanation:
the product above will be formed
Answer:
silver (Ag) and aluminum chloride (AlCl₃)
Explanation:
The reaction between aluminum and silver chloride is a single replacement reaction. A single replacement reaction is when one element switches places with another.
Al + 3AgCl ➔︎ 3Ag + AlCl₃
In the reaction, the cations (positively charged ions) switch places. Aluminum (Al) switches places with Silver (Ag). So, the products of the reaction are silver and aluminum chloride.
Hope this helps.
calculate the molarity of a solution containing 15.2 grams of nacl dissolved in 2.5 l of solution
Answer:
THE MOLARITY OF THE SOLUTION IS 0.1039 MOL/DM3
Explanation:
Molarity is the number of moles of solute in a given solution,
Molarity in mol / dm3 = Molarity in g/dm3 / Molar mass
Mass = 15.2 g
Volume of solution = 2.5 l
Molar mass of NaCl = (23 + 35.5) = 58.5 g/mol
First, we calculate the molarity in g/dm3
Molarity in g/dm3 = mass /volume
= 15.2 g * 1 L / 2.5 L
=6.08 g /dm3
Hence, we will introduce the values and solve for molarity in mol/dm3
Molarity = 6.08 g/dm3/ 58.5 g/mol
Molarity = 0.1039 mol/dm3
The molarity of the solution is 0.1039 mol/dm3
New technologies have allowed buildings to become taller and heavier than
ever before. This is an example of:
A. green design.
B. the engineering process.
C. the evolution of building techniques.
D. material failure.
Answer:
C. the evolution of building techniques
Hope this helps.
conductors such as metal are materials that have a
Answer:
Conductors allow a flow of current or a charge of flow
I hope this helped! Please rate it the brainlist if possible, thanks
Gallium chloride is formed by the reaction of 2.25 L of a 1.50 M solution of HCl according to the following equation: 2Ga 6HCl --> 2GaCl3 3H2 Determine the mass of gallium chloride, in grams, produced. Group of answer choices
Answer:
198.56g of GaCl3
Explanation:
We'll begin by calculating the number of mole HCl in 2.25 L of a 1.50 M solution of HCl. This is illustrated below:
Molarity of HCl = 1.50 M
Volume = 2.25 L
Mole of HCl =..?
Molarity = mole /Volume
1.5 = mole /2.25
Cross multiply
Mole = 1.5 x 2.25
Mole of HCl = 3.375 mole
Next, we shall determine the number of mole Gallium chloride, GaCl3 produced from the reaction. This is shown below:
2Ga + 6HCl —> 2GaCl3 + 3H2
From the balanced equation above,
6 moles of HCl reacted to produce 2 moles of GaCl3.
Therefore, 3.375 mole of HCl will react to produce = (3.375 x 2)/6 = 1.125 mole of GaCl3.
Therefore, 1.125 moles of GaCl3 were produced from the reaction.
Next, we shall convert 1.125 mole of GaCl3 to grams. This is illustrated below:
Molar mass of GaCl3 = 70 + (35.5x3) = 176.5g/mol
Mole of GaCl3 = 1.125 mole
Mass of GaCl3 =..?
Mole = mass /Molar mass
1.125 = mass of GaCl3 /176.5
Cross multiply
Mass of GaCl3 = 1.125 x 176.5
Mass of GaCl3 = 198.56g
Therefore, 198.56g of GaCl3 were produced from the reaction.
It was calculated that 4.3mL of 0.417 M HCl is required to titrate 11.9 mL of 0.151 M Mg(OH)2. Show evidence 2 HCl(aq) + Mg(OH)2(aq) → + MgCl2(aq) + 2 H2O(l)
Answer:
See explanation.
Explanation:
Hello,
In this case, for the described chemical reaction:
2 HCl(aq) + Mg(OH)2(aq) → MgCl2(aq) + 2 H2O(l)
We can notice there is a 2:1 molar ratio between the moles of hydrochloric acid and magnesium hydroxide, therefore, at the equivalence point:
[tex]n_{HCl}=2*n_{Mg(OH)_2}[/tex]
And in terms of volumes and concentrations we verify:
[tex]V_{HCl}M_{HCl}=2*V_{Mg(OH)_2}M_{Mg(OH)_2}[/tex]
So we use the given data to proof it:
[tex]4.3mL*0.417M=2*11.9mL*0.151M\\1.793=3.594[/tex]
Therefore, we can conclude the data is wrong by means of the 2:1 mole ratio that for sure was not taken into account. This is also supported by the fact that normalities are actually the same, but the nomality of magnesium hydroxide is the half of the hydrochloric acid normality since the acid is monoprotic and the base has two hydroxyl ions.
Best regards.
Determine the [OH⁻] concentration in a 0.344 M Ca(OH)₂ solution.
Answer:
[tex]0.688M[/tex]
Explanation:
Hello,
In this case, it is widely acknowledged that strong bases usually correspond to those formed with metals in groups IA and IIA which have relatively high activity and reactivity, therefore, when they are dissolved in water the following dissociation reaction occurs (for calcium hydroxide):
[tex]Ca(OH)_2\rightarrow Ca^{2+}+2OH^-[/tex]
In such a way, for the same volume, we can compute the concentration of hydroxyl ions by simple stoichiometry (1:2 molar ratio):
[tex]0.344\frac{molCa(OH)_2}{L}*\frac{2molOH^-}{1molCa(OH)_2} \\\\0.688\frac{mol OH^-}{L}[/tex]
Or simply:
[tex]0.688M[/tex]
Regards.
For the reaction 2 A - Products, the concentration of A is monitored over time. A graph of [A] versus time was found to be linear, with a negative slope. Select the true statement regarding this reaction.
A) The reaction is first order with respect to A.
B) The reaction is second order with respect to A.
C) The rate constant has a negative value.
D) In 2 The reaction has a half-life equal to k.
E) None of these statements is true.
Answer:
none of these statements is true
according to the question E) None of these statements is true.
What is a concentration in chemistry?The concentration of a chemical substance expresses the amount of a substance present in a mixture. There are many different ways to express concentration. Chemists use the term solute to describe the substance of interest and the term solvent to describe the material in which the solute is dissolved
What is concentration in chemistry units?
Quantitative units of concentration include molarity, molality, mass percentage, parts per thousand, parts per million, and parts per billion.
Learn more about concentration here
https://brainly.com/question/24595796
#SPJ2
A mixture of krypton and nitrogen gases, at a total pressure of 711 mm Hg, contains 11.7 grams of krypton and 4.10 grams of nitrogen. What is the partial pressure of each gas in the mixture
Answer:
A. Partial pressure of krypton, Kr is 346.97 mmHg
B. Partial pressure of nitrogen, N2 is 364.03 mmHg.
Explanation:
Step 1:
Data obtained from the question. This include the following:
Total pressure (Pt) = 711 mmHg
Mass of Kr = 11.7 g
Mass of N2 = 4.10 g
Partial pressure of Kr =..?
Partial pressure of N2 =...?
Step 2:
Determination of the number of mole of krypton, Kr and nitrogen, N2. This is illustrated below:
Molar mass of Kr = 84g/mol
Mass of Kr = 11.7g
Mole of Kr =?
Mole = mass /Molar mass
Mole of Kr = 11.7/84 = 0.139 mole
Molar mass of N2 = 2x14 = 28g/mol
Mass of N2 = 4.10g
Mole of N2 =?
Mole = mass /Molar mass
Mole of N2 = 4.1/28 = 0.146 mole
Step 3:
Determination of the mole fraction for each gas. This is illustrated below:
Mole of Kr = 0.139 mole
Mole of N2 = 0.146 mole
Total mole = 0.139 + 0.146 = 0.285 mole
Mole fraction of Kr = mol of Kr/total mol
Mole fraction of Kr = 0.139/0.285
Mole fraction of Kr = 0.488
Mole fraction of N2 = mol of N2/total mol
Mole fraction of N2 = 0.146/0.285
Mole fraction of N2 = 0.512
A. Determination of the partial pressure of krypton, Kr.
This is illustrated below:
Total pressure (Pt) = 711 mmHg
Mole fraction of Kr = 0.488
Partial pressure of Kr =..?
Partial pressure = mole fraction x total pressure
Partial pressure of Kr = 0.488 x 711
Partial pressure of Kr = 346.97 mmHg
B. Determination of the partial pressure of nitrogen, N2
This is illustrated below:
Total pressure (Pt) = 711 mmHg
Mole fraction of N2 = 0.512
Partial pressure of N2 =?
Partial pressure = mole fraction x total pressure
Partial pressure of N2 = 0.512 x 711
Partial pressure of N2 = 364.03 mmHg
Electronegativity is a concept that is useful along with other concepts in Group of answer choices predicting the polarity of a bond formulating a statement of the octet rule determining the charge of a negative ion deciding how many electrons are involved in a bond
Answer:
Predicting the polarity of a bond is the correct answer to this question.
Explanation:
Polar-covalent bonded substances have atoms that are distributed unequally among the central atom. The polarity of this bond is essentially determined by the bound atoms uniformly electronegativities.
To evaluate the polarity using numerical means of a covalent bond, if the result is between 0.4 and 1.7, then the bond is usually polar covalent.
A temperature of 41 Fahrenheit is the same as
Answer:
5 degrees Celsius.
Explanation:
Temperature measures the average kinetic energy of particles of the substances. Therefore a temperature of 41 Fahrenheit is the same as 5 degree Celsius
What is temperature?
Temperature is used to measure degree or intensity of heat of a particular substance. Temperature is measured by an instrument called thermometer.
Temperature can be measured in degree celsius °c, Kelvin k or in Fahrenheit. Temperature is a physical quantity. Heat always flow from higher temperature source to lower temperature source.
We can convert these units of temperature into one another. The relationship between degree Celsius and Fahrenheit can be expressed as:
°C={5(°F-32)}÷9
Substituting given values in above equation
°C= {5(41-32)}÷9
°C= 5°C
Therefore a temperature of 41 Fahrenheit is the same as 5 degree Celsius
To know more about temperature, here:
https://brainly.com/question/13694966
#SPJ6
When performing a gram stain, it is necessary to remove crystal violet stain from any gram negative bacteria on the slide. Microbiologists use a decolorizing solution to accomplish this. A common recipe is equal parts 95% ethanol and acetone. How many mL of water would you need to add if you have 99% ethanol and want to end up with 500 mL of decolorizer
Answer:
10.11 mL
Explanation:
Given that :
Total volume of decolorizer = 500 mL
A common recipe is equal parts 95% ethanol and acetone.
So;
The volume of 95% ethanol in the decolorizer = 500mL/2 = 250 mL
Let represent V(ml) for the 99% of ethanol needed to make 95% of the 250 mL of ethanol;
Therefore:
V(ml) × 0.99 = 250 × 0.95
V(ml) × 0.99 = 237.5
V(ml) = 237.5/0.99
V(ml) = 239.89 mL
Hence; the amount of water to be added to 95% of ethanol = ( 250 - 239.89 )mL = 10.11 mL
Temperature farthest from the
initial temperature (22.5°C)
COMPLETE
RETRY
Answer:
The next part is 8.8
Explanation:
You're gonna subtract 31.3 by 22.5 which is 8.8
You're welcome :)
The value of q-cal is 142.8 J in the reaction of magnesium and hydrochloric acid in a different constant pressure calorimeter with a calorimeter constant of 12.75 J/degrees Celsius.
What is calorimeter?A calorimeter is a device that measures the amount of heat in a chemical or physical process.
To calculate the value of q-cal (heat absorbed or released by the calorimeter), we need to use the following equation:
q = C * ΔT
Where q is the heat absorbed or released by the calorimeter, C is the calorimeter constant, and ΔT is the change in temperature.
In this case, we know that the calorimeter constant is 12.75 J/degrees Celsius, the initial temperature is 22.5 degrees Celsius, and the final temperature is 33.7 degrees Celsius.
Therefore, we can calculate ΔT as:
ΔT = final temperature - initial temperature
ΔT = 33.7°C - 22.5°C
ΔT = 11.2°C
Substituting these values into the equation, we get:
q = C * ΔT
q = 12.75 J/°C * 11.2°C
q = 142.8 J
Therefore, the value of q-cal is 142.8 J.
For more details regarding calorimeter, visit:
https://brainly.com/question/4802333
#SPJ7
Your question seems incomplete, the probable complete question is:
Suppose you perform the reaction of magnesium and hydrochloric acid in a different constant pressure calorimeter with a calorimeter constant of 12.75 J/degrees Celsius. The initial temperature in the calorimeter is 22.5 degrees Celsius and the final temperature after the reaction is 33.7 degrees Celsius. What is the value of q-cal?
Which of the following is an alkali metal?
A. Lithium (LI)
B. Boron (B)
c. Calcium (Ca)
D. Krypton (Kr)
Answer:
lithium is akali metal
Answer:
lithium is an alkali metal as it lies in group 1st in modern perodic table.
) Which property listed below is NOT that associated with a metallic atomic solid: (a) electrically (b) elastic (c) high melting (d) tough insulating point
Answer:
I'd say elastic
Metallic atomic solids, forming metal objects, can pass electric currents through, need a lot of heat to melt, and since electricity can easily pass through, it's quite tough/impossible to find an insulating point.
By what mechanism does cyclohexanol react when treated in sulfuric acid and what compound results?A) E 1; methoxycyclohexane B) E2: methoxycyclohexane C) SN 1; methoxycycloheXafle D) E2; cyclohexene E) E 1: cyclohexene
Answer:
E 1: cyclohexene
Explanation:
This reaction is an example of the dehydration of cyclic alcohols. The reaction proceeds in the following steps;
1) The first step of the process is the protonation of the cyclohexanol by the acid. This now yields H2O^+ attached to the cyclohexane ring.
2) the water molecule, which a good leaving group now leaves yielding a carbocation. This now leaves a cyclohexane carbocation which is highly reactive.
3) A water molecule now abstracts a proton from the carbon adjacent to the carbocation leading to the formation of cyclohexene and the regeneration of the acid catalyst. This is an E1 mechanism because it proceeds via a carbocation intermediate and not a concerted transition state, hence the answer.
Which process is endothermic?a)b)c)d)The evaporation of water from the skin.The burning of candle wax.The oxidation of iron in a chemical hand warmer.The combustion of natural gas in a stove
Answer:
The answer is option a. The evaporation of water from the skin
Explanation:
An endothermic reaction is any synthetic reaction that retains heat from its environment. The ingested energy gives the enactment energy to the reaction to happen.
No new bonds formed, no bonds broken in this example. water molecules go from liquid to vapour (gas ), intermolecular bond exist between polar (-OH) molecules and energy is required to break these bonds during the change from liquid to gas. So, it is endothermic .
Remaining three above examples are exothermic. combustion of gas releases energy(exothermic). burninig of the candle exothermic because the energy released from the oxygen into carbon dioxide and water.oxidation of iron also exothermic
10. Which functional group is present in the molecule?
Alcohol
It carries at least one hydroxyl functional group ( i.e -OH ) bound to a saturated carbon atom.
Therefore the functional group present is -OH functional group.
Answer:
Carboxylic acid
Explanation:
Using GRIGNARDS REAGENT convert methane to ethanol
Answer:
J
Explanation:
Carbon dioxide gas reacts with liquid water to produce aqueous carbonic acid.” Which chemical equation correctly translates this description? CO2 (s) + H2O (g) → H2CO3 (s) CO2 (l) + H2O (l) → H2CO3 (l) CO2 (g) + H2O (g) → H2CO3 (aq) CO2 (g) + H2O (l) → H2CO3 (aq)
Answer: CO2(g)+H2O(I) > H2CO3(Aq)
Explanation:
Got it right?
Which example describes a use for gemstones?
fabrics
plastics
drill bits
paper clips
Answer:
Drill bits
Explanation:
Gemstones such as diamonds are used in drill bits because of their hardness.
They are a 10 on the Mohs scale of hardness, which runs from 0 to 10.
Drill bits are produced from gemstones due to their hardness.
What are gemstones?Gemstones are the name given to pieces of minerals that can be cut and polished valuable accessories.
Gemstones such as diamonds are used in drill bits because of their hardness.
Examples of drill bitsBrad Point Drill BitsMasonry Drill BitsRivet Drill BitsSpade Drill BitsThus, drill bits are produced using gemstones.
Learn more about gemstones here: https://brainly.com/question/24448445
Which of the following is a consequence of humans using fossil fuels
Answer:
Explanation:
Following are a few consequences of fossil fuels
1. It causes air pollution.
2. When they are burned, they produce toxic substances which leads to global warming.
3. Waste products are hazardous to public health and environment.
4. They are non - renewable and unsustainable.
5. Drilling fossil fuels is a dangerous process
Hope this helps
plz mark as brainliest!!!!
How many grams of CO are produced when 41.0 g of C reacts?
Answer:
95.7 g CO to the nearest tenth.
Explanation:
2C + O2 ---> 2CO
Using relative atomic masses:
24 g C produces 2*12 + 2*16 g CO.
So 41 g produces ( (2*12 + 2*16) * 41 ) / 24
= 95.7 g CO,
Fe(s)+ 2 HC2H3O2(aq) → Fe(C2H3O2)2(aq) + H2(g) Which substance is reduced and which subject is oxidized?
Answer:
- Iron is oxidized from 0 to +2.
- Hydrogen is reduced from +1 to 0.
Explanation:
Hello,
In this case, for the given reaction, we must first indicate the oxidation state of each element (notice that HC2H3O is acetic acid)
[tex]Fe ^0(s)+ 2 H^+(C_2H_3O_2)^-(aq) \rightarrow Fe^{2+}(C_2H_3O_2)_2^-(aq) + H_2^0(g)[/tex]
Thereby, notcing that iron is alone at the beginning, it has zero as its oxidation state, but once the reaction is undergone, it changes to +2, moreover, the displaced hydrogen in the acetic acid is with +1 but after the chemical reaction it becomes alone for which its oxidation state is 0, thereby, we find that:
- Iron is oxidized from 0 to +2.
- Hydrogen is reduced from +1 to 0.
Best regards,
What is the mass of 7.68 x 1024 molecules of phosphorus trichloride?
Answer:
THE MASS OF 7.68 *10^24 MOLECULES OF PHOSPHORUS TRICHLORIDE IS 1746.25 g.
Explanation:
Molar mass of PCl3 = ( 31 + 35.5 *3) = 137.5 g/mol
At 7.68 * 10^24 molecules, how many number of mole is present?
6.03 * 10^23 molecules = 1 mole
7.68*10^24 molecules = x mole
x mole = 7.68 *10^24 molecules/ 6.03 *10^23
x mole = 1.27 *10 moles
x mole = 12.7 moles
Using mole = mass / molar mass
mass = mole * molar mass
mass = 12.7 moles * 137.5 g/mol
mass = 1746.25 g
Hence, the mass of 7.68 *10^24 molecules is 1746.25 g
The substance used by homeowners and municipal workers to melt ice on sidewalks and roadways is usually calcium chloride rather than sodium chloride. Discuss two possible rea-sons for this preference.
Answer:
1. It dissolves much more ice faster than sodium chloride
2. Calcium chloride is more effective in melting ice at lower temperatures.
Explanation:
Salts are used to melt ice on roadways and sidewalks because they help to lower the freezing point of water.
Sodium chloride and calcium chloride are both salts used for this purpose but calcium chloride is usually preferred for the following two reasons:
1. It dissolves much more ice faster than sodium chloride: Calcium chloride dissolves much more ice faster than sodium chloride because when it dissociates, it produces three ions instead of the two produced when sodium chloride. Therefore, the heat of hydration of its ions is greater than that of sodium chloride.
2. Calcium chloride is more effective in melting ice at lower temperatures. It lowers the freezing point of water more than sodium chloride. Calcium chloride is able to lower the freezing point of water to about -52°C while sodium chloride only lowers it to about -6°C.
Why does a new period start on the periodic table, instead of the row continuing? A. A new period starts when a new energy shell starts. B. A new period starts when a new neutron cycle starts. C. None of these D. It is based on how many protons it has.
Answer:
B
Explanation:
All the elements in a period have valence electrons in the same shell. The number of valence electrons increases from left to right in the period. When the shell is full, a new row is started and the process repeats.
A new period starts when a new neutron cycle starts. Hence, option B is correct.
What is the period in the periodic table?A period in the periodic table is a row of chemical elements. All elements in a row have the same number of electron shells.
All the elements in a period have valence electrons in the same shell.
The number of valence electrons increases from left to right in the period.
When the shell is full, a new row is started and the process repeats.
Hence, option B is correct.
Learn more about the period in the periodic table here:
https://brainly.com/question/3433177
#SPJ2
https://brainly.com/question/16061498?referrer=searchResults
Look at the reaction below and state which direction the reaction would shift: A closed container of water and its vapor at equilibrium. Vapor is added to the system.
Water + Energy <=> Vapor
explain
Answer:
According to Le Chatelier's principle, adding additional reactant to a system will shift the equilibrium to the right, towards the side of the products. ... If we add additional product to a system, the equilibrium will shift to the left, in order to produce more reactants.
4. What are the potential sources of error that might cause disagreement between the activity series' prediction of reactions and your observations of reactions
Answer:
1. Not to have enough salt water on the foil
2.not cleaning the foil well to remove interfering materials