Answer: mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm
Explanation:
In the conclusion to the snake mole lab, you have to convert 3.45 moles of (NH4)2S04 to
grams. What is the molar mass of (NH4)2504?
Fill in the blanks:
87 pg = [? ]x10^[?]g
87 picograms are equivalent to [tex]8.7\times 10^{-11}[/tex] grams.
This is a unit problem, in which a derived unit must translated into a fundamental unit. A picogram is a equivalent to a trillionth of a gram, which is the fundamental SI mass unit. Mathematically speaking, we have the following equivalence:
[tex]1\,pg = 1\times 10^{-12}\,g[/tex]
Now we proceed to find the equivalent value for this case:
[tex]87\,pg[/tex]
[tex]87\times 10^{-12}\,g[/tex]
[tex]8.7\times 10^{-11}\,g[/tex]
87 picograms are equivalent to [tex]8.7\times 10^{-11}[/tex] grams.
To learn more on unit conversions, we kindly invite to check this verified question: https://brainly.com/question/13016491
Will give 10 points.
Why does an atom have a neutral charge?
A It has equal numbers of electrons and protons.
B. The number of neutrons equals the number of protons and
electrons in the atom.
C. It has equal numbers of electrons and neutrons.
D. It has equal numbers of neutrons and protons.
Answer:
option A it has equal numbers of electrons and protons
Explanation:
electrons are negatively charged and protons are positively charged, so if the numbers of each are equal, then the atom will be neutral.
Answer:
A. it has equal numbers of electrons and protons
Explanation:
The overall charge of every atoms is neutral because the number of electrons and protons is the same. Protons are positively charged while electrons are negatively charged and so they cancel out.
explain why nitrogen diffuses faster than clorine
A glacier can travel over the surface of Earth and reshape it. The chart describes three things a glacier can do.
Glacial Actions:
1. breaks large rocks into smaller ones
2. pushes broken rocks ahead of itself
3. leaves broken rocks behind when the front edge melts
Which terms BEST describe these glacial actions in the order as presented?
a. weathering, erosion, deposition
b. erosion, chemical weathering, deposition
c. deposition, weathering, erosion
d. chemical weathering, mechanical weathering, erosion
Answer:
A
Explanation:
Which dosage form is a semisolid preparation that contains very small solid particles that are suspended in a liquid
A GEL is a semisolid preparation that contains very small solid particles that are suspended in a liquid. A gel always contains an agent (e.g., agarose) that provides stiffness to the preparation.
A gel is a semisolid preparation that contains a gelling agent which provides stiffness to the preparation.
The gelling agent can be, for example, agarose (this gelling agent is used to prepare gels in electrophoresis).
In an agarose gel, agarose molecules are organized into three-dimensional (3D) structures similar to pores, which allow the passage of DNA fragments during electrophoresis.
Learn more about agarose gel here:
https://brainly.com/question/5661562
How did the atomic model change due to the research of thomson, rutherford, and bohr?
Answer:
Thomson's plum pudding model of the atom had negatively-charged electrons embedded within a positively-charged "soup." Rutherford's gold foil experiment showed that the atom is mostly empty space with a tiny, dense, positively-charged nucleus. Based on these results, Rutherford proposed the nuclear model of the atom.
Find the molecular formula of ethylene glycol, used in antifreeze, if its empirical formula is CH3O and its molar mass is 62 g/mol.
The molecular formula of the ethylene glycol is C₂H₆O₂.
From the question given above, the following data were obtained:
Empirical formula = CH₃O Molar mass of compound = 62 g/mol Molecular formula =?Molecular formula = empirical × n = molar mass
[CH₃O]n = 62
[12 + (3×1) + 16]n = 62
31n = 62
Divide both side by 31
n = 62 / 31
n = 2
Molecular formula = [CH₃O]n
Molecular formula = [CH₃O]₂
Molecular formula = C₂H₆O₂
Learn more about empirical and molecular formula: https://brainly.com/question/25820990
as the distance from the nucleus increases, what happens?
The nuclear effective charge decreases as the energy of repulsion between the atoms increases between one another. The farther away an atom is from the nucleus, the more loosely that is attracted to that nucleus.
Identify the limiting reactant when 9.65-g H2SO4 reacts with 6.10-g of NaOH.
Answer:
3.56
Explanation:
What is a trial? please
how can knowledge of percent composition help you as a consumer ? how can you promote responsible consumerism ?
Answer:
it is a nice question....my mind tells me that the first is it use me as a good vibes and can use to anything the second i will do my best too absorbe it.
Explanation:
Hope this help...
noble gases are used in many situations where a safe and constant environment must be maintained. for example, helium is used to provide a protective atmosphere for making fiber optics and semiconductors. argon is used to fill incandescent and flourescent light bulbs to prevent oxygen from corroding the hot filament. why are noble gases used in these situations?
Answer:
Because they do not naturally react with other elements
Explanation:
Since noble gases do have a fulfilled valence shell, they do not react with other elements because they're already stable by the themselves.
Can someone help?
Name the compound:
CH=benzene
Why?
benzene is represented by the empirical formula CH, which indicates that a typical sample of the compound contains one atom of carbon (C) to one atom of hydrogen (H).
----(Is this what you meant???)
Butane (C4 H10(g), Delta. Hf = â€"125. 6 kJ/mol) reacts with oxygen to produce carbon dioxide (CO2 , Delta. Hf = â€"393. 5 kJ/mol ) and water (H2 O, Delta. Hf = â€"241. 82 kJ/mol) according to the equation below. 2 upper C subscript 4 upper H subscript 10 (g) plus 13 upper o subscript 2 (g) right arrow 8 upper C upper O subscript 2 (g 0 plus 10 upper H subscript 2 upper O (g). What is the enthalpy of combustion (per mole) of C4H10 (g)? Use Delta H r x n equals the sum of delta H f of all the products minus the sum of delta H f of all the reactants. â€"2,657. 5 kJ/mol â€"5315. 0 kJ/mol â€"509. 7 kJ/mol â€"254. 8 kJ/mol.
The enthalpy of this reaction is -5315 KJ/mol.
The equation of the reaction is;
2C4H10(g) + 13O2(g) -----> 8CO2 (g) + 10H2O(g)
We know that the enthalpy of reaction can be obtained from the enthalpy of formation of the reactants and products as follows;
ΔHrxn = ΔHf(products) - ΔHf(reactants)
We have the following information from the question;
ΔHf C4H10 = - 125. 6 kJ/mol
ΔHf CO2 = - 393. 5 kJ/mol
ΔHf H2O = - 241. 82 kJ/mol
ΔHf O2 = 0 KJ/mol
Hence;
[(8 × (- 393. 5 )) + (10 × (- 241. 82))] - [2( - 125. 6))]
= -5315 KJ/mol
Learn more: https://brainly.com/question/13164491
When heat is being transferred away from a substance, the resulting phase change graph is known as a ____ curve.
a. Cooling
B. Heating
which of the following is the most dangerous type of radiation?
gamma decay, alpha decay, beta, decay, they are all equally dangerous
Answer:
gamma decay
Explanation:
gamma rays have the highest frequency on the EM spectrum, which makes them the most dangerous.
This boy said he was finna destroy me and winked what does that mean
Answer:
pipe
Explanation:
You receiving
Which of these codes is best for creating websites?
The most used codes for the creation of websites are CSS and HTML.
What is a code?A code can be defined as the basic unit that composes a website. This implies that by using a code you can create a website from scratch and by the end of the process you should have a functional and complete website.
What codes are used?In website creation, the most common codes are CSS and HTML.
HTML: This is the most common code used and also one of the easiest to understand and use.
CSS: This code is not as popular as HTML but it is still a very popular code used by many people creating websites.
Note: This question is incomplete because the options are not given; due to this, I answered it based on general knowledge.
Learn more about websites in: https://brainly.com/question/1631583?referrer=searchResults
The bowl of fruit has a mass of 2.2 kg.
What net force must act on the bowl of fruit to make it accelerate to the right
at a rate of 4.4 m/s2? (Hint: Use F = ma.)
A. F = 9.68 N right
B. F = 9.68 N left
C. F = 6.60 N left
D. F= 6.60 N right
Taking into account the Newton's second law, the correct answer is option A. F = 9.68 N right
In first place, acceleration in a body occurs when a force acts on a body.
Newton's second law states that a force will change the speed of an object because the speed and/or direction will change. These changes in velocity are called acceleration.
So, Newton's second law defines the relationship between force and acceleration mathematically. This law says that the acceleration of an object is directly proportional to the sum of all the forces acting on it and inversely proportional to the mass of the object
Mathematically, Newton's second law is expressed as:
F= m×a
where:
F = Force [N] m = Mass [kg] a = Acceleration [m/s²]In this case, you know:
F= ? m= 2.2 kg a= 4.4 m/s²Replacing in Newton's second law:
F= 2.2 kg× 4.4 m/s²
Solving:
F= 9.68 N
Finally, As the bowl of fruit accelerates to the right, the correct answer is option A. F = 9.68 N right
Learn more about the Newton's second law:
brainly.com/question/23845187?referrer=searchResults
brainly.com/question/13959891?referrer=searchResults
25.0g of iron is heated to 100.0 and then placed in 50.0 g of water in a insulated calorimeter. the initial temperature of the water is 38.00. the specific heat of water is 4.181j/g and the specific heat if iron is 0.45j/g. what is the final temp of the water and the iron?
Answer:
Approximately [tex]41.2\; {\rm ^{\circ} C}[/tex].
Explanation:
Let [tex]t\; {\rm ^{\circ} C}[/tex] be the final temperature of the water and the iron.
Temperature of the water would be increase by [tex](t - 38.00)\; {\rm ^{\circ} C}[/tex].
Temperature of the iron would be reduced by [tex](100.0 - t)\; {\rm ^{\circ} C}[/tex].
Let [tex]c[/tex] denote the specific heat of each material. Let [tex]m[/tex] denote the mass of the material. For a temperature change of [tex]\Delta t[/tex], the energy change involved would be:
[tex]Q = c\, m \, \Delta t[/tex].
The energy that the water need to absorb would be:
[tex]\begin{aligned}& Q(\text{water, absorbed}) \\ =\; & c(\text{water}) \, m(\text{water})\, \Delta t (\text{water}) \\ =\; & 4.181\; {\rm J \cdot g^{-1} \cdot K^{-1}} \times 50\; {\rm g} \times (t - 38.00)\; {\rm ^{\circ} C} \\ =\; & (209.05\, t - 7943.9)\; {\rm J} \end{aligned}[/tex].
The energy that the iron would need to release would be:
[tex]\begin{aligned}& Q(\text{iron, released}) \\ =\; & c(\text{iron}) \, m(\text{iron})\, \Delta t (\text{iron}) \\ =\; & 0.45\; {\rm J \cdot g^{-1} \cdot K^{-1}} \times 25.0\; {\rm g} \times (100.0 - t)\; {\rm ^{\circ} C} \\ =\; & (1125 - 11.25 \, t)\; {\rm J} \end{aligned}[/tex].
Since this calorimeter is insulated, the energy that the iron had released would be equal to the energy that the water had absorbed:
[tex]Q(\text{water, absorbed}) = Q(\text{iron, released})[/tex].
[tex]209.05\, t - 7943.9 = 1125 - 11.25\, t[/tex].
[tex]t \approx 41.2[/tex].
Thus, the final temperature of the water and the iron would be approximately [tex]41.2\; {\rm ^{\circ} C}[/tex].
Why are ionic compounds not considered to be molecules?
Answer:
No, ionic compounds are crystals of infinite cations and anions bound together. There is no “molecule” of ionic compounds such as, for example, NaCl, because there are no single units of the compound.
Explanation:
Ionic compounds are not considered to be molecules because they do not consist of discrete, covalently bonded units like molecules.
In ionic compounds, the bonding occurs through the transfer of electrons from one atom to another, resulting in the formation of ions. These ions are held together by strong electrostatic attractions, known as ionic bonds.
Unlike molecules, which are formed by the sharing of electrons in covalent bonds, ionic compounds do not have individual units with fixed numbers of atoms. Instead, they exist as a three-dimensional lattice structure composed of alternating positive and negative ions. The ions are arranged in a repeating pattern throughout the crystal lattice.
Learn more about Ionic compounds, here:
https://brainly.com/question/30420333
#SPJ6
What role does each type of chemical play in the firework
Answer: Antimony: Antimony is used to create firework glitter effects. Barium: Barium is used to create green colors in fireworks,
Explanation:
Answer:
Explanation:Antimony: Antimony is used to create firework glitter effects. Barium: Barium is used to create green colors in fireworks,
Anyone down to start a convo
what object has a mass of 10 grams and a volume of 2 mL
Answer:
Destiny = 5 g/ml
Explanation:
The formula for density is d=
Knowing this, divide your mass by volume:
10 g / 2 ml = 5 g/ml
Final answer:
Destiny = 5 g/ml
How many molecules of NO2 are in 0.36 moles?
Answer:
1 mol contains 6.022*10^23 molecules 0.36 moles contain 0.36 * 6.022*10^23 = 2.2 *10^23 molecules
Explanation:
Help me in the 10 the number. Clue- helium and hydrogen make up the first of these
Answer:
helium and hydrogen make up the first of these
the answer is period
a terminal alkyne was treated with nanh2 followed by propyl iodide. the resulting internal alkyne was treated with ozone followed by water, giving only one type of carboxylic acid. provide a systematic, iupac name for the internal alkyne.
The systematic Iupac name for the internal alkyne is : 4-octyne
When only one type of carboxylic acid is made the internal alkyne will be symmetric and the compounds can be 3-hexane or 4-octyne but given that one of the reactants is propyl iodide. Therefore
The Internal alkyne will have an Iupac name 4-octyne
Hence we can conclude that the systematic Iupac name for the internal alkyne is 4-octyne
Learn more about 4-octyne : https://brainly.com/question/24355559
9.
a
What is the energy of a wave having a frequency of 5.71 x 1013 Hz?
Answer:
[tex] \huge{3.783 \times {10}^{ - 19} \: J}[/tex]
Explanation:
The energy of the wave can be found by using the formula
E = hfwhere
E is the energy
f is the frequency
h is the Planck's constant which is
6.626 × 10-³⁴ Js
From the question we have
E = 6.626 × 10-³⁴ × 5.71 × 10¹³
We have the final answer as
[tex]3.783 \times {10}^{ - 19} \: J[/tex]
Hope this helps you
factors that affect the rate of a chemical reaction include which of the following? i. frequency of collisions of reactant particles ii. kinetic energy of collisions of reactant particles iii. orientation of reactant particles during collisions
To solve such this we must know the concept of double displacement reaction. Therefore, the correct option is option B that is kinetic energy of collisions of reactant particles.
What is chemical reaction?Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, double displacement reaction.
There are so many factors that affects the rate of reaction, among these, kinetic energy of collisions of reactant particles affect the rate of a chemical reaction. the rate of reaction is directly proportional to the rate of chemical reaction.
Therefore, the correct option is option B.
Learn more about the chemical reactions, here:
https://brainly.com/question/3461108
#SPJ2