Two gravitational forces act on a
given object. How do you determine the total gravita-
tional force acting on the object?
Answer:
Explanation:
Depends on the location of the two forces. If they are aligned on the same side of the object, you would simply add.
X -----------F1 -------F2
X is the object. F1 and F2 are both masses which create a gravitational force. They both are the form of Fx = G * m1 * m2 / r^2. The total force is F1 + F2
If they are are on either side of the object, you subtract.
F1 ---------X ---------F2
Fx = F1 - F2
Any other location of F1 and F2 is much more complicated by the use of trigonometry.
A crate slides down a ramp that makes a 20∘ angle with the ground. To keep the crate moving at a steady speed, Paige pushes back on it with a 68 N horizontal force.
Part A
How much work does Paige do on the crate as it slides 3.0 m down the ramp?
Answer:
the answer is 69.7687j
Explanation:
W =F sin Φ
how to prove the first linear motion
Answer:
Then solve for v as a function of t. This is the first equation of motion . It's written like a polynomial — a constant term (v0) followed by a first order term (at). Since the highest order is 1, it's more correct to call it a linear function.
Explanation:
What is velocity? Explain.
Answer:
The velocity of an object is the rate of change of its position with respect to a frame of reference, and is a function of time. Velocity is equivalent to a specification of an object's speed and direction of motion (e.g. 60 km/h to the north).bow long does it take earth to rotate once on its axis
Answer:
23 hours, 56 minutes
Which form can solutions come in?
liquid
gas
solid
all of the above
Answer:
liquid
Explanation:
leave a thanks if helped !
what are two variables that are always in every experiment?
the independent variable and the dependent variable.
A number line goes from 0 to 30. Closed circles are at 6 and 25. A line is drawn from point 6 to point 25. Ari is swimming a 25-meter race. After swimming 6 meters, she catches up to Amanda in a ratio of 7:3 from the 6-meter mark. At what meter mark does Ari catch up to Amanda? Round to the nearest tenth, if necessary. Ari catches up to Amanda at meters.
The position on the meter mark where Ari catches up with Amanda is 19.3 m.
The given parameters:
Range of the number line, = 0 to 30Position of the closed circles, = 6 and 25The ratio between the initial position and final position of Ari = 7:3The distance between 6 m mark and 25 m mark is calculated as follows;
[tex]d = 25 \ m - \ 6 \ m\\\\\d = 19 \ m[/tex]
The distance traveled by Ari before catching up with Amanda is calculated as follows;
total ratio = 7 + 3 = 10
[tex]distance = \frac{7}{10} \times 19 \ m\\\\distance = 13.3 \ m[/tex]
The position of Ari from the 6 m mark is calculated as follows;
[tex]position = 6 \ m \ + \ 13.3 \ m\\\\position = 19.3 \ m[/tex]
Thus, the position on the meter mark where Ari catches up with Amanda is 19.3 m.
Learn more about partition of line segments here: https://brainly.com/question/11764811
Answer:
The above answer is correct! The answer is 19.3 meters :)
Explanation:
adding a ss for proof!
hope this helps :D
can someone explain it please?
Answer:
The answer is 9.4 m/s
Explanation:
Because you add 5.0 + 4.5= 9.4
The expression below was formed by combining different gas laws. V is proportional to StartFraction n T over P EndFraction. Which law was used to determine the relationship between the volume and the number of moles in this equation? Boyle’s law Charles’s law Avogadro’s law Gay-Lussac’s law.
The relationship between the number of moles and the volume of gas is determined by the Avogadro's law in this equation.
Avogadro's law:
It states that at constant temperature and pressure, gases with same volume has the same number of molecules.
For an ideal gas with with constant temperature and pressure, the volume of the gas is directly proportional to the amount or number of molecules.
Charle's law states that at constant pressure, volume (V) and temperature (T) are directly proportional.Boyle's law states that at constant temperature, the volume of gas is inversely proportional to the gas pressure.Gay-Lussac's law states that pressure (P) and absolute temperature (T) of the gas are directly proportional.Therefore, the relationship between the number of moles and the volume of gas is determined by the Avogadro's law in this equation.
To know more about Avogadro's law:
https://brainly.com/question/6534027
Answer:
Avogadro's law
Explanation:
Help it multiple-choice 16 and 17 only
Answer:
16. c
17. d
Explanation:
16. Newton’s third law states that a force will always have an opposite but equal force as a reaction, so every force comes as a pair of action-reaction forces. For example, if you push on a book, the book also pushes on you.
17. If 1cm represents 15N, then 5cm must represent 15N*5=75N.
Given that the mass of a liquid is 0.01kg and the volume of the liquid is 0.05m^3 . Calculate the density of the liquid
A) 2kg/m^3
B)0.2kg/m^3
C) 5kg/m^3
D) 0.5kg/m^3
Answer:
B.
Explanation:
Density = mass / volume
= 0.01/0.05
= 0.2 kg/m^3.
Use this table of a school bus during morning pickups to calculate its average speed between 0 h and 2.340 h.
Position (km) Time (h)
0.0 0.000
1.2 0.024
2.8 0.051
4.2 0.084
16.3 2.340
The average speed between 0 h and 2.340 h is 6.97 Km/h
Average speed is defined as the total distance travelled divided by the total time taken to cover the distance.
[tex]Average \: speed = \frac{total \: distance}{total \: time} \\ \\ [/tex]
With the above formula, we can obtain the average speed between 0 h and 2.340 h as illustrated below:
Total time = 2.340 – 0 = 2.340 hTotal distance = 16.3 – 0 = 16.3 KmAverage speed =?[tex]Average \: speed = \frac{total \: distance}{total \: time} \\ \\Average \: speed = \frac{16.3}{2.340} \\ \\ Average \: speed = 6.97 \: Km/h \\ \\ [/tex]
Learn more about average speed: https://brainly.com/question/24884027
Answer:
6.983 km/hr
Explanation:
The average rate of change is (16.34 - 0.0)/(2.34 - 0.000) ≈ 6.983 km/hr
Mejor yo por favor
plssssss look at the picture i need it right hurry pls
Answer:
it is B
Explanation:
Answer:
CO and H20
Explanation:
Depth perception is also known as ___________ vision.
Answer:
depth from optical expansion
Explanation:
how to find velocity of center of mass before and after the collision
Hey there! I'll try to provide you with my best answer.
Answer: In a collision, the velocity change is always computed by subtracting the initial velocity value from the final velocity value. If an object is moving in one direction before a collision and rebounds or somehow changes direction, then its velocity after the collision has the opposite direction as before.
a 3 kg rock is falling from a rock ledge in the absence of air resistance how much force will the rock strikes the ground with
Answer:
papi sus
Explanation:
The density of gold is 19.3 g/cm3. What is the volume of a 13 g gold nugget? (Density: D = m/v)
Answer:
Formula = D = m/v
Given value of D = 19.3 and m = 13g
19.3 = 13/v
V × 19.3 = 13
v = 13/19.3
v = 0.67
What is the velocity of a dropped object after it has fallen for 3.0 s?
Answer:
30 m/s.
Explanation:
A moving coil meter has a resistance of 25 and indicate full scale deflection when a current of 4.0mA flows through it.How could this meter be converted to a millimeter having a full scale deflection for a current of 50 mA?
By adding an external resistor of 287.5 Ω in series with the meter, the conversion of the moving coil meter to have a full-scale deflection for a current of 50 mA.
Current sensitivity (S) is the ratio of full-scale deflection current to full-scale deflection voltage.
S = I(fsd) / V(fsd).
S = 4.0 / 25
S = 0.16 mA/Ω
Desired current sensitivity for 50 mA (S(new)) = 50 mA / V(fsd)
(S(new)) = 50 mA / V(fsd)
(S(new)) = 50 / 0.16
(S(new)) = 312.5 Ω
Add External Resistor:
Add an external resistor (R(ext)) in series with the meter. Calculate R(ext) as the difference between R(new) and the internal resistance of the meter
(R(internal) = 25 Ω:
R(ext) = R(new) - R(internal)
R(ext) = 312.5 Ω - 25 Ω
R(ext) = 287.5 Ω
By adding an external resistor of 287.5 Ω in series with the meter, the conversion of the moving coil meter to have a full-scale deflection for a current of 50 mA. This will achieve the desired result.
To know more about the external resistor:
https://brainly.com/question/32843695
#SPJ3
What will happen if the two plungers are pressed together firmly? Explain your answer.
Answer:
This air being forced out causing the air pressure inside to be much lower than that on the outside. As higher air pressure always pushes, it keeps the two plungers together.
Hope that helps. x
can someone explain it with steps?
A car was moving on a road at a constant speed of 15 m/s when suddenly the car driver saw some animal on the road at a distance of 21 m from the car, so he applied the brakes after a response time of 0.4 s and stopped before hitting the animal by 1 m. What was the deceleration of the car?
a-7.5 m/s^2
b-5.2 m/s^2
c-8.0 m/s^2
d-5.6 m/s^2
Answer:
Option C is the correct answer
Explanation:
Distance travelled by car during reaction time
[tex]=15\times0.4\\\\=6m[/tex]
The car stopped before hitting the animal by [tex]1 m[/tex]
Distance travelled during deceleration is [tex]21-6-1=14m[/tex]
Hence by [tex]v^2=u^2+2as[/tex]
We have
[tex]0^2=15^2+2 \cdot a \cdot 14\\\\a=\frac{-225}{28} \\\\=-8.03m/s^2[/tex]
Option C is the correct answer
Distance traveled during reaction time
15(0.4)=6mTotal distance
21-6-1=14m[tex]\\ \sf\longmapsto v^2-u^2=2as[/tex]
[tex]\\ \sf\longmapsto -(15)^2=2(14)a[/tex]
[tex]\\ \sf\longmapsto -225=28a[/tex]
[tex]\\ \sf\longmapsto a=-8.0m/s^2[/tex]
A heating curve is a graph that shows the temperature change of a substance as
thermal energy is introduced.
True
False
Answer:
This statement is true, a heating curve is a graph that shows the temperature change of a substance as thermal energy is introduced.
A heating curve is a graph that represents the temperature change of a substance as thermal energy is introduced.
What is the heating curve?The heating curve can be described as the relationship between the heating supply temperature and the outside air temperature of the system. The heating curve gives what temperature the boiler is to heat the water at an outdoor temperature.
Heating curves indicate how the temperature changes as a substance are heated up. Cooling curves are generally the opposite of the heating curve. They indicate how the temperature changes as a substance are cooled down. Similar to heating curves, cooling curves have horizontal parts where the state transforms from gas to liquid/ from liquid to solid.
The heating curve represents the material in phases of solid, liquid, and gas. As this graph is a plot of T v/s q, the slope is 1/mC. As the heating continues, the solid substance melts. During this time the temperature remains constant. The length of the line can be described as the amount of heat required to melt the solid.
Learn more about the heating curve, here:
https://brainly.com/question/27018999
#SPJ2
Kepler’s laws of planetary motion describe each of the three laws
Kepler's laws laid the foundation for the early study of astronomy.
Kepler was one of the earliest astronomers that contributed immensely to the study of the planets. The Kepler's laws of planetary motion are as follows;
The planets each travel along an ellipse with the sun at one focus.The line joining the sun and the planets sweeps out equal areas in equal time intervals.The square of the period of the revolution of the planets equals the cube of the planet's mean distance from the sun.Learn more about Kepler's laws; https://brainly.com/question/1017661
Which image shows an example of the electromagnetic force in action?
Answer:
Where are the images?
Explanation:
I can't help if there is no image(s) to this question.
how to read a micrometer on a clark cm-100 vickers hardness tester
Answer:
Explanation:
Equipment manufactured by LECO(8 Corporation, St. Joseph, Michigan is warranted free from defect in material
and workmanship for a period of six months from the date of purchase. Equipment not manufactured by LECO is
covered to the extent of warranty provided by the original manufacturer and this warranty does not cover any
equipment, new or used, purchased from anyone other than the LECO Corporation. All replacement parts shall
be covered under warranty for a period of thirt days from date of purchase. LECO MAKES NO OTHER
REPRESENTATION OR WARRANTY OF ANY OTHER KIND, EXPRESSED OR IMPLIED, WITH RESPECT TO
THE GOODS SOLD HEREUNDER, WHETHER AS TO MERCHANTABILITY, FITNESS FOR PURPOSE, OR
OTHERWISE.
Expendable items such as crucibles, combustion tubes, chemicals and items of like nature are not covered by
this warranty.
LECO's sole obligation under this warranty shall be to repair or replace any part or parts which, to our
satisfaction, prove to be defective upon return prepaid to LECO Corporation, St. Joseph, Michigan. This
obligation does not include labor to install replacement parts, nor does it cover any failure due to accident, abuse,
neglect, or use in disregard of instructions furnished by LECO. In no event shall damages for defective goods
exceed the purchase price of the goods, and LECO SHALL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES WHATSOEVER.
All claims in regard to the parts or equipment must be made within ten (10) days after Purchaser learns of the
facts upon which the claim is based. Authorization must be obtained from LECO prior to returning any other
parts. This warranty is voided by failure to comply with these notice requirements.
NOTICE
The warranty on LECO equipment remains valid only when genuine LECO replacernent parts are employed.
Since LECO has no control over the quality or purity of consumable products not manufactured by LECO, the
specifications for accuracy of results using LECO instruments are not guaranteed unless genuine LECO
consumables are employed in conjunction with LECO instruments. If purchaser defaults in making payment for
any parts or equipment, this warranty shall be void and shall not apply to such parts and equipment. No late
payment or cure of default in payment shall extend the warranty period provided herein.
LECO Corporation is not responsible for damage to any associated instruments, equipment or apparatus nor wil
LECO be held liable for loss of profit or other special damages resulting from abuse, neglect, or use in disregard
of instructions. The Buyer, their employees, agents and successors in interest assume all risks and liabilities for
the operation, use and/or misuse of the product(s) described herein and agree to indemnify, hold harmless and
defend the seller from any and all claims and actions arising from any cause whatsoever, including seller's
negligence for personal injury incurred in connection with the use of said product(s) and any and all damages
proximately resulting therefrom.
CAUTION
The instrument should be operated only by technically qualified individuals who have fully read and understand
these instructions. The instrument should be operated only in accordance with these instructions.
The operator should follow all ,of the warnings and cautions set forth in the manual and the operator should follow
and employ all applicable standard laboratory safety procedures.
LECO'" is a registered trademark of the LECO Corporatio
The mass of a car is 2000 lbs, and is traveling 100 mi/hr on the freeway, what is its momentum?
Answer:
momentum= 145999324.8(kg(m/s))
Explanation:
formula for momentum: p=mv
where p= momentum, m=mass, and v=velocity.
p=2000lbs(100mi/hr)
The standard unit for mass is kg
2000lbs=907.2kg
standard unit for velocity is meters/sec
100mi=160934meters.
907.2kg(160934m/s)=145999324.8
A 150 g sample of brass at 100 °C is placed in a Styrofoam cup of water containing 120 mL of water at 10 °C. No heat is lost to the cup or surroundings. What is the final temperature of the mixture? answer in celsius
Answer:
≈19.144°C.
Explanation:
all the details are in the attachment.
Note, that c₁, m₁, t₁ are the parameters of the sample of brass; c₂, m₂ and t₂ are the parameters of the sample of water.
P.S. change the provided design according Your requirements.
Describe your acceleration if you ride your bike up a hill,then ride down the other side.
Answer:
first negative and then positve
who made the first game
A William Shakespeare
B Horace Alexander
C Doris Twitchell Allen
D William higginbotham