7. Calculate the force applied on an object if the Pressure exerted is 90 Pascal over an area of 900 cm2.

Answer:

maximum  point  y= 2R

 vₓ = wR ,  v_{y} = 0, aₓ = 0,  a{y} = - Rw²

minimum point   y=R

vₓ = wR , v_{y} = - R w,  aₓ = - R w²,  a_{y} = 0

Explanation:

The definition of velocity is

        v = dr / dt

        vₓ = dx / dt

        [tex]v_{y}[/tex] = dy / dt

        vₓ = Rw cos wt + wR

        v_{y} = -Rw sin wt

acceleration is defined by

         a = dv / dt

         aₓ = -Rw² sin wt

         a_{y} = - R w² cos wt

these are the general expressions for velocity and acceleration, to find the explicit values ​​for the maximum and minimum y points, let's find these points and substitute

maximum  point

         y = R cos wt + R

the heat is maximum when the cosine is worth 1

         y_max = 2R

at this point the speed is

         vₓ = wR

         v_{y} = 0

the acceleration is

         aₓ = 0

         a_{y} = - Rw²

minimum point

        this occurs when the cosine is zero

        y = R

speed is

       vₓ = wR

       v_{y} = - R w

acceleration is

        aₓ = - R w²

        a_{y} = 0

Answer:

If the force applied on the object is in the direction of its motion, the speed of the object increases. If the force is applied in the direction opposite to the direction of motion, then it results in a decrease in the speed of the object.

Answer:

Increase in μk

Explanation:

different ans set

Answer:

161,000 cm

Explanation:

1 mi × (1.61 km/mi) × (1000 m/km) × (100 cm/m) = 161,000 cm

Answer:

3504 m/s

Explanation:

Let x be the horizontal component of distance

y - vertical component of distance

t-time

ax- horizontal component of acceleration

ay-Vertical component of acceleration

Vx-horizontal component of velocity

Vy-Vertical component of velocity

horizontally: x = V_x ×t + ½×a_x×t²  

plugging the values we get

23500× cos 55º = 1350×cos25.0º × 10.20 + ½×a_x× (10.20)²  

⇒ax = 19.2 m/s²  

Moreover,

V'x = V_x + a_x×t = 1350×cos25.0º + 19.2×10.20= 1419 m/s  

similarly in vertical direction:

y = V_y×t + ½×a_y×t²  

23500×sin55º = 1350×sin25.0º×10.20s + ½×a_y×(10.20)²  

⇒a_y = 258 m/s²  

Also,

V'y = V_y + a_y×t = 1350×sin25.0º + 258×10.20 = 3204 m/s  

Therefore

V = √(V'x² + V'y²) = 3504 m/s  

therefore,  magnitude of final velocity of missile=3504 m/s

THANKS  

3

5.0

(7 votes)

Not the answer you're looking for?

FIND MORE

Previous

Next

Manetho

Manetho

Rank: Ambitious

29830/500

0/5

Your influence

1

14h : 28m

Answering Streak

Answer a question in time to keep your streak going and the unlocks coming.

Fun fact

An apple, potato, and onion all taste the same if you eat them with your nose plugged

1

2

2

Get +4

bonus

2

3

3

Get +6

bonus

3

Last 7 days

Overall

Your stats from the last 7 days compared with the previous 7 days

Popularity

881

People learning from your answers.

+4%

Brainliest

Answer:

Don't Forget To Follow, Brainliest, And Give Me Heart :)

Answer:

Artery and viens

Explanation:

Answer:

Emphasizes

Explanation:

The expression of an art is intelligible to those that understand it, as such to make an impression an artist has to emphasize the point they want to communicate

An art is an expression of the personal experiences of the artist or a reaction to events or to reveal the realities as seen by the artist such as global warming and the environment, so as to get the attention of people with the goal to change them, such that a good art changes the most people, hence the need for emphasis.

Answer:

A - emphasizes

Answer:

you can learn from here

https://www.toppr.com/ask/en-bd/question/a-car-is-moving-with-a-velocity-of-10-ms-the-driver-sees-a-wall/

Answer:

They can be penetrated only with longer wavelengths such as radio and infrared.

Explanation:

A dark nebula can be defined as an interstellar cloud that is so dense as a result of high concentration of gas and dust and as such it obscures the visible wavelengths of light from stars behind it, thus appearing completely opaque (dark patch) in front of a bright emission nebula or in regions having  plenty stars.

Hence, dark nebulae can be penetrated only with longer wavelengths such as radio and infrared light because they cannot be absorbed by the dust layers or particles coated with frozen carbon monoxide and nitrogen residing in the dark nebulae.

Answer:

Motion of Objects

Explanation:

Motion of Objects

Both Static and Dynamic Forces.

Answer:

Those units which are independent of each other are called fundamental unite. there are seven fundamental unite of seven fundamental quantities

Answer:

Lò xo (từ tiếng Pháp: ressort) là các vật thể đàn hồi được sử dụng trong các hệ thống cơ học. Lò xo được phân thành hai loại:

biến dạng theo ý muốn

có lực đàn hồi theo ý muốn

lực kế, cân trọng lượng... trong khoa đo lường.

giảm xóc xe cộ

phát âm (chuông, loa phóng thanh...)

lưu trữ năng lượng (dây cót đồng hồ)

công tắc điện.

bám giữ vật (kẹp quần áo)

bút bi.

Answer:

Answer c: "when particles in matter gain or lose energy , they change state"

Explanation:

As energy is provided to the molecules of the substance in question, they acquire more speed or vibration, increasing their separation in the substance, which can become then a liquid , or a gas. The reverse path also happens as the particles give away energy.

Answer:

c. when particles in matter gain or lose energy , they change state

we know that for example, if you add heat (energy) to ice it would melt (change state) or if you freeze water (change state) it would become ice.

Answer:

ok bro

Explanation:

jdkdkfnfnfkfn fkfkkfodow icjdbe

Explanation:

Water does expand with heat (and contract with cooling), but the amount of expansion is pretty small. So when you boil a can filled with water and seal it, the water will contract slightly as it cools. The can may kink slightly, but that will be it. Actually, most likely the only things you will be able to see is then top and bottom will be sucked in and go concave. Just like a commercial can of beans.

Now if you have a can with a little water and a big air space, things are completely different.

As the water boils, water vapour is given off. Steam. Let it boils for a minute just to make sure (nearly) all the air is expelled and the can is filled with steam.

Now when you put the lid on and cool the can, that steam condenses back to water, and goes from filling the can to a few drops of water. The can is now filled (if that is the right word) with a near vacuum, The air pressure, 15 lbs/square inch, will be pressing on every surface of the can, with nothing inside the can to resist it.

The can will crumple before your eyes.

Answer:

C. Meter

Explanation:

The International System of Unit (SI) is gotten from the french word Systeme international is a modern form of metric measurement. It is the system of measurement that is universally accepted. It is from this SI units that all other system of units are derived. There are seven basic SI units which are:

1) Length in Meter (m)

2) Time in Seconds (s)

3) Amount of Substance in mole (m)

4) Electric current in ampere (A)

5) Temperature in kelvin (k)

6) Luminous intensity in candela (cd)

7) Mass in kilogram (kg)

Answer: Helium=4 is the answer

Explanation:

took the test and got it right that'

s the answer.

Answer:

It's b

Explanation:

I took the quiz on EDGE and got it right.

Answer:

proton:18

neutron:39-18=21

Answer:

12.5 m/s

Explanation:

a = Δv / Δt

2.5 m/s² = Δv / 5 s

Δv = 12.5 m/s

Answer:

Normal force

Explanation:

Calculating :-

We know

[tex]\boxed{\sf F_c=\dfrac{mv^2}{r}}[/tex]

[tex]\\ \sf\longmapsto F_c=\dfrac{20(10)^2}{4}[/tex]

[tex]\\ \sf\longmapsto F_c=\dfrac{20(100)}{4}[/tex]

[tex]\\ \sf\longmapsto F_c=\dfrac{2000}{4}[/tex]

[tex]\\ \sf\longmapsto F_c=500N[/tex]

Explanation:

Hello there!!!

You just need to use simple formula for force and momentum,

F= m.a

and momentum (p)= m.v

where m= mass

v= velocity.

a= acceleration .

And the solutions are in pictures.

Hope it helps..

Answer:

speed

Explanation:

The hydro power plant consists of a (artificial) dam that builds gravitational potential energy, P.E. from natural flowing water sources, by locating the dam along the water path. The stored potential energy, P. is converted into kinetic energy, K.E. as the water falls from the dam, down to the turbines, located at a much lower level according to the following principle of conservation of energy equation;

Total Mechanical Energy, M.E. = The potential energy of the water, P.E. + The kinetic energy of the water, K.E. = Constant

M.E. = P.E. + K.E. = Constant

Where;

P.E. = m·g·h

K.E. = (1/2)·m·v²

m = Mass

g = The acceleration due to gravity

h = The height of the dam

v = The velocity

The charts can be explained as follows;

Given that the potential energy P.E. = m·g·h, we have that the potential energy is directly proportional to the height of the dam, and therefore, at mid height, the potential energy would be half the maximum value, and we have;

At mid height, P.E. = (1/2)·[tex]\mathbf{P.E._{max}}[/tex]

At the top of the dam, the (vertical) velocity of the water = 0, therefore, the kinetic energy = 0

Therefore, at the top of the dam, we get;

M.E. = [tex]P.E._{max}[/tex] + 0 =

M.E. = [tex]\mathbf{P.E._{max}}[/tex]

Similarly, at the bottom of the dam, the height, h = 0, therefore, being proportional to the height, P.E. = 0, and the velocity is maximum, and at the bottom, we have;

M.E. = 0 + [tex]K.E._{max}[/tex]

The first chart, water is halfway down the dam

At the halfway down therefore, we have;

P.E. = (1/2)·[tex]\mathbf{P.E._{max}}[/tex]

M.E. = [tex]P.E._{max}[/tex] = (1/2)·

∴ K.E. = [tex]P.E._{max}[/tex] - (1/2)·

Therefore the first chart, water is halfway down the dam;

Halfway, K.E. = (1/2)·[tex]\mathbf{P.E._{max}}[/tex] = P.E.

∴ K.E. = P.E.  as shown on the chart

The second chart, water has reached the turbine

Water reaches the turbine at the bottom, and as explained above, we get;

M.E. = 0 + [tex]K.E._{max}[/tex]

∴ M.E.≈ [tex]K.E._{max}[/tex]

Therefore, when water has reached the turbine at the bottom of the dam, the kinetic energy is approximately proportional to the total mechanical energy as shown in the chart

The third chart, water is at the top of the dam

Here as shown above, we have;

The total mechanical energy, M.E. ≈ [tex]\mathbf{P.E._{max}}[/tex] as shown on the chart

Learn more about potential and kinetic energy here;

https://brainly.com/question/18683052

You haven't told us what any of those letters represents.

I'm going to assume that ...

-- ' P ' = power

-- ' I ' = circuit current

-- ' V ' = circuit voltage

-- ' E ' = energy

-- ' t ' = time.

Now I'm ready to answer the question that I just invented.

P = I / V

V = P x I

Both of these are false statements, and can't be used to calculate anything.

P = I x V   is the correct equation to calculate electrical power.

E = P x t   is the correct equation to calculate electrical energy.

Explanation:

Given that,

Initial speed of the bus, u = 0

Acceleration of the bus, a = 0.5 m/s²

Let v is the velocity at the end of 2 minutes. The change in velocity divided by time equals acceleration.

So,

[tex]a=\dfrac{v-u}{t}\\\\v=u+at\\\\v=0+0.5\times 120\\\\v=60\ m/s[/tex]

Let d is the distance cover during that time. So,

[tex]v^2-u^2=2ad\\\\d=\dfrac{v^2-u^2}{2a}\\\\d=\dfrac{(60)^2}{2\times 0.5}\\\\d=3600\ m[/tex]

So, the final speed is 60 m/s and the distance covered during that time is 3600 m.

The answer is:

-5846.75

Answer:

In the data table, we can see the frequency distribution in the diet of a given type of chimpanzee.

Why a researcher further classify the data separating information of males and females?

Well, the objective of the researcher is to find information about these chimpanzees, so if he notices that the diet varies (even slightly) between males and females, separating the information between males and females would be useful to know how the diet varies, and why this happens.

This is the primary motive of why a researcher would want to separate the information of males and females.