The holding cost of GT Notebook computers would be $24,000 per year if 1,200 units were kept in stock. The total inventory cost would be $38,400.
The Demand for the GT Notebook computer is 1,200 units per year. Each Notebook computer costs $1,000, and the company has a holding cost of 20% of unit cost per year. The order cost is $1,200 per order. The following formula is used to determine the economic order quantity (EOQ) of a product, which is the optimum order quantity that reduces inventory and order costs to a minimum. EOQ = √(2DS/H), where D = demand in units, S = setup or order cost per order, and H = holding cost per unit per year.Let's apply the formula to GT Notebook computers.EOQ = √(2 x 1,200 x 1,200/0.20 x 1,000)EOQ = √(2,880,000/200)EOQ = √(14,400)EOQ = 120This implies that the company should order 120 GT Notebook computers each time to minimize the overall inventory and order costs. In the case of GT Notebook computers, the order cost and holding cost contribute equally to the total cost. The ordering cost would account for $10 per unit, which is $1,200 divided by 120 units, while the holding cost would account for $200 per unit, which is 20% of $1,000. This implies that the total cost per unit is $1,210, which is the sum of the unit price, ordering cost, and holding cost of each notebook computer.The ordering cost of GT Notebook computers would be $14,400 per year if 120 units were ordered ten times per year. The holding cost of GT Notebook computers would be $24,000 per year if 1,200 units were kept in stock. The total inventory cost would be $38,400.
To know more about computers visit:
https://brainly.com/question/32297638
#SPJ11
Although you are employed full time and earn a good salary, your household expenses keep accumulating. You decide to start a side hustle to generate extra income, and want to do proper research rather than just jumping in. Required Prepare a business plan to discuss with, and convince, your family to create this new venture as a family business, to get their support, and to show each member of the family how they can have a role and duties.
By presenting a well-prepared business plan to my family, I aim to gain their support and demonstrate how each member can contribute with specific roles and duties.
To address our household expenses and create an additional source of income, I propose establishing a family business that leverages our skills, resources, and interests. By involving the entire family, we can not only generate extra income but also strengthen our bond and instill a sense of shared responsibility. To gain their support and illustrate the potential benefits, I will present a well-structured business plan that outlines the purpose, strategies, and expected outcomes of the venture.
The business plan will include a thorough market analysis, identifying potential customers and competitors in our chosen industry. It will highlight the unique selling points of our family business, emphasizing the advantages we have over existing players in the market. Additionally, I will outline the specific roles and duties each family member can undertake based on their individual strengths and interests. This will ensure that everyone feels valued and involved, and it will provide a clear framework for the division of responsibilities.
Furthermore, the plan will include a detailed financial projection, outlining the potential revenue streams and expected expenses. By presenting a realistic assessment of the income we can generate through the family business, I aim to address any concerns about financial viability and demonstrate the potential for growth over time. This will help reassure my family members that the side hustle is a worthwhile endeavor that can have a positive impact on our financial situation.
Overall, by presenting a well-prepared business plan that emphasizes the benefits, involvement, and clear roles for each family member, I aim to gain the support and participation of my family in starting a side hustle as a family business. Through open communication and collaboration, we can work together to achieve our financial goals while strengthening our family ties.
Learn more about Business:
brainly.com/question/15826604
#SPJ11
A firm earned profits of $8,000, $ 10,000, $ 12,000 and $. 16,000 during 1989, 1990, 1991 and 1992 respectively. The firm has capital investment of $ 50,000. A fair rate of return on investment is 15% p. a. Calculate Goodwill of the firm based on three years purchase of average super profits of last four years.
The goodwill of the firm based on three years' purchase of average super profits is $18,000.
To calculate the goodwill, we first need to find the average super profit. The average super profit is calculated by taking the average of the super profits for the given years. Super profit is the excess of actual profits over normal profits, where normal profits are calculated by multiplying the capital investment by the fair rate of return.
Average super profit = (8000 - 5000 + 10000 - 5000 + 12000 - 5000 + 16000 - 5000) / 4 = $6000
Next, we calculate the goodwill by multiplying the average super profit by the number of years' purchase. In this case, we use three years' purchase.
Goodwill = Average super profit * Number of years' purchase = $6000 * 3 = $18,000
Therefore, the goodwill of the firm based on three years' purchase of average super profits is $18,000.
learn more about The goodwill here:
https://brainly.com/question/31927963
#SPJ11
Give information about the volume of the exports, imports, GDP, share of exports in GDP, share of imports in GDP, per capita GDP and the trade openness of russia for year 2010 and 2020. Explain the change over those 10 years of the indicators
According to World Bank data, in 2010, Russia's exports amounted to $396 billion, while imports totaled $260 billion.
In 2020, exports were $336 billion, and imports were $201 billion. Over the 10-year period, Russia's exports decreased by 15%, and imports decreased by 23%. In terms of GDP, in 2010, Russia's GDP was $1.47 trillion, while in 2020, it was $1.48 trillion, representing a slight increase. The share of exports in GDP was 27% in 2010 and 23% in 2020, showing a decrease and the share of imports in GDP was 18% in 2010 and 14% in 2020, also indicating a decrease. The per capita GDP increased from $10,187 in 2010 to $10,169 in 2020, representing a small decrease. Lastly, the trade openness of Russia (exports plus imports as a share of GDP) decreased from 45% in 2010 to 37% in 2020.
To learn more about exports click here https://brainly.com/question/26428996
#SPJ11
To balance supply and demand at the aggregate level, you have two options: capacity-focused tools and demand-focused tools. Which of the following is NOT a demand-focused tool?
Price
Subcontracting
Lead time
Inventory
In order to balance supply and demand at the aggregate level, two options are available: capacity-focused tools and demand-focused tools. Inventory, subcontracting, and lead time are all demand-focused tools. The correct answer is Price.
Price is not a demand-focused tool; instead, it is a capacity-focused tool. Companies may have several tools available to help them balance supply and demand at the aggregate level. They can be divided into two categories: capacity-focused and demand-focused tools. Demand-focused tools are ones that focus on demand and attempt to manage it so that supply and demand are balanced. Inventory, subcontracting, and lead time are all demand-focused tools.
They may be used to handle demand fluctuations so that the company can produce products in a timely manner without producing too much or too little. Capacity-focused tools are the ones that focus on capacity. Price is one such capacity-focused tool. When supply exceeds demand, a company may use a price drop to reduce supply and increase demand. In this manner, the price may be used to help companies manage their production capacity.
To know more about Capacity-Focused Tools visit:
https://brainly.com/question/30590414
#SPJ11
Syazwan and his partner Sharmila have formed a new limited partnership, Syazwan & Sharmila Security Consultants (3SC). 3SC consults with corporations to determine their security needs. Syazwan and Sharmila have hired you to design a database management system to help them manage their business. Due to a recent increase in business, 3SC has decided to automate its client tracking system. You and your team have done a preliminary analysis and come up with the following set of classes, attributes, and business rules :
Consultant
There are two types of consultants; (a) the business consultant determines security needs and estimates the actual services to be performed, and (2) the technical consultants perform services according to the specifications developed by the business consultants. Attributes of business consultant are the following: Employee ID (identifier), Name, Address (which is composed of Street, City, State, and Zip Code), Telephone, Date of Birth, Age, Business Experience (which is composed of Number of Years, Type of Business [or businesses], and Degrees Received). Attributes of technical consultant are the following: Employee ID (identifier), Name, Address (which is composed of Street, City, State, and Zip Code), Telephone, Date of Birth, Age, Technical Skills, and Degrees Received.
Customer
Customers are businesses that have asked for consulting services. Attributes of customer are Customer ID (identifier), Company Name, Address (which is composed of Street, City, State, and Zip Code), Contact Name, Contact Title, Contact Telephone, Business Type, and Number of Employees.
Location
Customers can have multiple locations. Attributes of location are Customer ID (identifier), Location ID (which is unique only for each Customer ID), Address (which is composed of Street, City, State, and Zip Code), Telephone, and Building Size.
Service
A security service is performed for a customer at one or more locations. Before services are performed, an estimate is prepared. Attributes of service are Service ID (identifier), Description, Cost, Coverage, and Clearance Required.
Additional Business Rules
In addition to the classes outlined previously, the following information will need to be stored in tables and shown in the model. These may be classes, but they also reflect a relationship between more than one class:
Estimates, which have characteristics of Date, Amount, Business Consultant, Services, and Customer
Services Performed, which have characteristics of Date, Amount, Technical Consultant, Services, and Customer
You may also assume the following:
A customer can have many consultants providing many services. You wish to track both actual services performed as well as services offered.
Therefore, there should be two relationships between customer, service, and consultant, one to show services performed and one to show services offered as part of the estimate. From the case study given above, build Class Diagram (DRAW IN TABLE)
Class Diagram:
+---------------------+
| Consultant |
+---------------------+
| - Employee ID |
| - Name |
| - Address |
| - Telephone |
| - Date of Birth |
| - Age |
+---------------------+
^
|
|
|
+---------------------+ | +---------------------+
| BusinessConsultant | | | TechnicalConsultant |
+---------------------+ | +---------------------+
| - Business Experience| | | - Technical Skills |
+---------------------+ | +---------------------+
|
|
|
+---------------------+
| Customer |
+---------------------+
| - Customer ID |
| - Company Name |
| - Address |
| - Contact Name |
| - Contact Title |
| - Contact Telephone |
| - Business Type |
| - Number of Employees
+---------------------+
^
|
|
|
+---------------------+
| Location |
+---------------------+
| - Customer ID |
| - Location ID |
| - Address |
| - Telephone |
| - Building Size |
+---------------------+
^
|
|
|
+---------------------+
| Service |
+---------------------+
| - Service ID |
| - Description |
| - Cost |
| - Coverage |
| - Clearance Required|
+---------------------+
^ ^
| |
| |
| |
+---------------------+ +---------------------+
| Estimates | | ServicesPerformed |
+---------------------+ +---------------------+
| - Date | | - Date |
| - Amount | | - Amount |
+---------------------+ +---------------------+
| |
| |
v v
+---------------------+ +---------------------+
| Business Consultant | | Technical Consultant|
+---------------------+ +---------------------+
| - Services | | - Services |
+---------------------+ +---------------------+
| |
| |
v v
+---------------------+ +---------------------+
| Customer | | Customer |
+---------------------+ +---------------------+
| - Services | | - Services |
+---------------------+ +---------------------+
Determine the class diagram?The class diagram depicts the entities and their relationships based on the given information. There are four main classes: Consultant, Customer, Location, and Service. The Consultant class has two subclasses: Business Consultant and Technical Consultant.
The Customer class represents businesses that require consulting services. The Location class represents the multiple locations of a customer. The Service class represents the security services provided.
The diagram includes relationships between the classes. A customer can have multiple consultants providing various services, so there are two relationships between Customer, Service, and Consultant classes. One relationship represents services performed, and the other represents services offered as part of the estimate.
The Estimates and Services performed classes capture additional information related to the estimates and services provided, such as dates and amounts. The Business Consultant and Technical Consultant classes maintain the relationship with the Estimates and Services performed classes, indicating their involvement in the respective activities.
Overall, the class diagram provides a visual representation of the entities, their attributes, and the relationships among them, facilitating the design of the database management system for 3SC.
To know more about visual representation, refer here:
https://brainly.com/question/29215093#
#SPJ4
how is earned value management different than straight financial accounting
Earned Value Management (EVM) is a project management technique that measures project performance by integrating cost, schedule, and scope elements.
It provides a comprehensive view of a project's progress and performance based on the value of work completed, enabling effective tracking and forecasting. In contrast, financial accounting primarily focuses on recording and reporting financial transactions to provide information for external stakeholders, such as investors and regulators.
In EVM, key performance indicators such as Earned Value (EV), Planned Value (PV), and Actual Cost (AC) are used to assess project performance. EV represents the value of completed work, PV is the authorized budget for the work scheduled, and AC is the actual cost incurred. By comparing these values, EVM allows project managers to evaluate if a project is ahead of or behind schedule, over or under budget, and whether the value of work performed aligns with the resources expended.
Financial accounting, on the other hand, deals with recording financial transactions, preparing financial statements, and complying with accounting standards. It focuses on providing accurate and reliable financial information for decision-making and external reporting purposes. Financial accounting encompasses areas like revenue recognition, expense allocation, asset valuation, and financial statement analysis.
While both EVM and financial accounting involve the use of financial data, their objectives and scope differ significantly. EVM is primarily concerned with monitoring and controlling project performance, enabling proactive decision-making and effective project management. Financial accounting, on the other hand, is broader in scope, addressing the financial aspects of an entire organization and providing information for stakeholders interested in the financial health and performance of the entity.
In summary, EVM and financial accounting serve distinct purposes. EVM focuses on measuring project performance and progress, integrating cost, schedule, and scope, while financial accounting emphasizes recording financial transactions and providing financial information to external stakeholders.
learn more about management here
https://brainly.com/question/14523862
#SPJ11
There is a 1-yr bond that pays semiannual coupon of 86% p.a. Current market yield of this bond is 20% p.a. With continuous compounding/discounting, what is the Macaulay duration of this bond? ➜ (1)
To calculate the Macaulay duration of a bond, we need to consider the time value of the bond's cash flows and their present values. The Macaulay duration is a measure of the weighted average time until the bond's cash flows are received.
In this case, the bond has a 1-year maturity and pays semiannual coupons of 8.6% per year. The current market yield is 20% per year with continuous compounding.
To calculate the Macaulay duration, we need to find the present value of each cash flow and weigh it by its proportion of the bond's total present value. Here's how we can calculate it:
Calculate the present value of each cash flow:
Present value of the semiannual coupons:
PV(coupons) = (8.6% / 2) * exp(-0.20/2) + (8.6% / 2) * exp(-0.20)
Present value of the face value (received at maturity):
PV(face value) = exp(-0.20)
Calculate the total present value of the bond:
PV(total) = PV(coupons) + PV(face value)
Calculate the proportion of each cash flow to the total present value:
Weight(coupons) = PV(coupons) / PV(total)
Weight(face value) = PV(face value) / PV(total)
Calculate the weighted average time until each cash flow is received:
Macaulay duration = (0.5 * Weight(coupons) * 0.5) + (1 * Weight(face value))
Substituting the values into the equation, you can calculate the Macaulay duration of the bond.
Learn more about Macaulay duration of a bond here:
https://brainly.com/question/30926017
#SPJ11
Question 2 (Total: 15 marks) You are a consumer of a product which your country imports. There is an increase in demand in the rest of the world for this product. You are wondering if this change will
As a consumer of an imported product, an increase in demand in the rest of the world for this product is likely to have an impact on availability, price, and potentially quality in your country's market.
When there is an increase in global demand for a product, it can lead to various effects. Firstly, the availability of the product in your country may be affected. Suppliers may allocate a larger portion of the product to meet the increased demand in other countries, resulting in limited availability in your local market.
Secondly, the price of the product may be influenced. Increased demand often leads to upward pressure on prices due to supply and demand dynamics. If the supply cannot meet the rising global demand, prices may increase, potentially affecting the affordability of the product for consumers in your country.
Lastly, the quality of the product could be impacted. If manufacturers or suppliers face challenges in meeting the increased demand, they may prioritize quantity over quality, leading to potential compromises in terms of product standards or customer service.
An increase in global demand for an imported product can have consequences for consumers in the importing country. Availability may be limited, prices may rise, and there could be potential quality implications. It is important for consumers to stay informed about market trends and make purchasing decisions accordingly, considering factors such as availability, price changes, and potential impact on quality.
To know more about potentially visit:
https://brainly.com/question/27972321
#SPJ11
Can traditional financial dealers coexist with electronic
financial market makers
Yes, traditional financial dealers can coexist with electronic financial market makers. Both play distinct roles in the financial markets and serve different types of investors.
Traditional financial dealers, such as investment banks or brokerage firms, provide services such as facilitating trades, executing orders, providing research and analysis, and offering advisory services to clients. They typically operate through human intermediaries who interact directly with clients and execute trades on their behalf. These dealers often have expertise in specific markets or products and provide personalized services tailored to the needs of their clients.
On the other hand, electronic financial market makers are technology-driven firms that use automated systems and algorithms to provide liquidity and facilitate trading in electronic markets. They continuously quote bid and ask prices, and their algorithms match buy and sell orders from market participants. Electronic market makers enhance market efficiency by providing liquidity, narrowing spreads, and improving price discovery.
Both traditional financial dealers and electronic market makers have their advantages and serve different types of investors. Traditional dealers may be preferred by clients who require personalized services, complex financial products, or specialized advice. Electronic market makers, on the other hand, offer efficient and cost-effective trading services, particularly for liquid and standardized securities.
In practice, many financial institutions adapt to the changing landscape by incorporating electronic trading capabilities into their operations while continuing to provide traditional dealer services. This allows them to cater to a wider range of clients and benefit from the advantages offered by both traditional and electronic approaches.
Learn more about financial markets here:
https://brainly.com/question/28481995
#SPJ11
Potvin Company produces mathematical and financial calculators and operates at capacity. Data related to the two products follows: Mathematical Financial Annual production in units 49,000 98,000 Direct materials cost $205,800 $411,600 Direct manufacturing labour cost $83,300 $166,600 Direct manufacturing labour-hours 4,900 9,800 Machine-hours 24,500 49,000 Number of production runs 49 49 Inspection hours 1,000 500 Manufacturing Overhead Costs Machining costs 271,950 Setup costs 98,000 Inspection costs 90,000 Required: 1. Choose a cost driver for each overhead cost pool and calculate the manufacturing overhead cost per unit for each produci 2. Compute the manufacturing cost per unit for each product. ( Total
The cost drivers for the overhead cost pools are chosen, and the manufacturing overhead cost per unit and manufacturing cost per unit are calculated for the Mathematical and Financial calculators.
The cost driver for the machining costs is machine-hours, as these costs are directly related to the hours the machines are used. The manufacturing overhead cost per unit for the Mathematical calculator is $11.08 ($271,950 / 24,500) and for the Financial calculator is $5.57 ($271,950 / 49,000).
The cost driver for setup costs is the number of production runs since each setup is required for each run. The manufacturing overhead cost per unit for both products would be $2 ($98,000 / 49) as the number of production runs is the same for both calculators.
The cost driver for inspection costs is inspection hours, as these costs depend on the time spent on inspections. The manufacturing overhead cost per unit for the Mathematical calculator is $90 ($90,000 / 1,000) and for the Financial calculator is $180 ($90,000 / 500).
To calculate the manufacturing cost per unit for each product, the direct materials cost, direct manufacturing labor cost, and manufacturing overhead cost per unit are added together. The manufacturing cost per unit for the Mathematical calculator is $10.29, and for the Financial calculator is $5.54.
To learn more about inspection click here:
brainly.com/question/15581066
#SPJ11
At a price of $1 each, Luciana (an average Bloomington resident) consumes 100 32-ounce sodas per year. Concerned that so much soda consumption may contribute to poor health, the Bloomington Mayor proposes a $0.20 tax on sodas. To avoid losing voters, the Mayor simultaneously proposes mailing a check for $20 to each Bloomington resident. As a result of these two policies, we predict (using the standard consumer choice model) that • Luciana's soda consumption will [Select] • Luciana will be [Select] • The government will collect [Select] from Luciana through the soda tax. At a price of $1 each, Luciana (an average Bloomington resident) consumes 100 32-ounce sodas per year. Concerned that so much soda consumption may contribute to poor health, the Bloomington Mayor proposes a $0.20 tax on sodas. To avoid losing voters, the Mayor simultaneously proposes mailing a check for $20 to each Bloomington resident. As a result of these two policies, we predict (using the standard consumer choice model) that • Luciana's soda consumption wil✓ [Select] decrease • Luciana will be [Select] increase non change • The government will collect [Select] from Luciana through the soda tax. At a price of $1 each, Luciana (an average Bloomington resident) consumes 100 32-ounce sodas per year. Concerned that so much soda consumption may contribute to poor health, the Bloomington Mayor proposes a $0.20 tax on sodas. To avoid losing voters, the Mayor simultaneously proposes mailing a check for $20 to each Bloomington resident. As a result of these two policies, we predict (using the standard consumer choice model) that • Luciana's soda consumption will [Select] • Luciana will be ✓ [Select] better off • The governme worse off ✓from Luciana through the soda tax. just as well off as before At a price of $1 each, Luciana (an average Bloomington resident) consumes 100 32-ounce sodas per year. Concerned that so much soda consumption may contribute to poor health, the Bloomington Mayor proposes a $0.20 tax on sodas. To avoid losing voters, the Mayor simultaneously proposes mailing a check for $20 to each Bloomington resident. As a result of these two policies, we predict (using the standard consumer choice model) that • Luciana's soda consumption will [Select] • Luciana will be [Select] The government will collec✓ [Select] from Luciana through the soda tax. less than $20 more than $20 exactly $20
Using the standard consumer choice model, the proposed policies of a $0.20 tax on sodas and a $20 check mailed to each Bloomington resident are predicted to result in Luciana's soda consumption decreasing.
The $0.20 tax on sodas increases the price of each soda from $1 to $1.20. According to the standard consumer choice model, when the price of a good increases, the quantity demanded typically decreases. Therefore, Luciana's soda consumption is predicted to decrease as a result of the tax.
Simultaneously, the $20 check mailed to each Bloomington resident serves as a form of income transfer. Since Luciana is an average resident, she will receive the $20 check. This additional income will make Luciana better off, as she now has extra money to spend or save.
Regarding the government's revenue from the soda tax, the tax is applied to each soda consumed. If Luciana consumes fewer sodas due to the increased price, the government's revenue collected from Luciana through the soda tax will be less than $20.
Learn more about revenue here:
https://brainly.com/question/29567732
#SPJ11
1.) You make a series of quarterly deposits of $7000 for 10 years. The nominal interest rate is 12% compounded monthly. What is the future value of these deposits at the end of year 10?
The future value of a series of quarterly deposits can be calculated using the formula for the future value of an ordinary annuity. The future value of the quarterly deposits at the end of year 10 would be $2,321,900.
The formula is:
Future Value = P * [(1 + r/n)^(nt) - 1] / (r/n)
Where:
P = Quarterly deposit amount ($7,000)
r = Nominal interest rate per period (12% or 0.12)
n = Number of compounding periods per year (12, since it is compounded monthly)
t = Number of years (10)
Using the given values in the formula, the future value of the deposits at the end of year 10 can be calculated as follows:
Future Value = 7000 * [(1 + 0.12/12)^(12*10) - 1] / (0.12/12)
Simplifying the expression:
Future Value = 7000 * [(1 + 0.01)^(120) - 1] / (0.01)
Calculating the exponent and simplifying further:
Future Value = 7000 * [(1.01)^(120) - 1] / 0.01
Using a calculator, the value inside the square brackets, (1.01)^(120) - 1, is approximately 3.317. Plugging this value into the formula:
Future Value = 7000 * 3.317 / 0.01
Calculating the expression:
Future Value = 2,321,900
Therefore, the future value of the quarterly deposits at the end of year 10 would be $2,321,900.
To Know more about interest rate click here: brainly.com/question/28236069
#SPJ11
Protectionist policies are used by governments in order to ...... a. protect domestic producers b. Decrease trade barriers c. lower incomes of producers d. Increase political power
Protectionist policies are used by governments in order to protect domestic producers , from foreign competition and to maintain or increase market share for domestic industries.
How are protectionist policies implemented?Protectionist policies are implemented by governments with the primary objective of safeguarding domestic producers and industries from foreign competition.
These policies are designed to shield domestic producers from the potentially adverse effects of international trade.By imposing trade barriers such as tariffs, quotas, and subsidies, governments aim to restrict imports and give an advantage to domestic producers.
The protection of domestic producers is a key rationale behind protectionist measures. By imposing tariffs on imported goods, domestic producers can compete on a more level playing field, as foreign goods become relatively more expensive.
This protection allows domestic industries to maintain or increase market share, protect jobs, and stimulate economic growth.
However, protectionist policies also have potential drawbacks. While they may shield domestic producers, they can lead to higher prices for consumers, reduced product variety, and inefficiencies in the allocation of resources.
Additionally, protectionism can spark retaliatory actions from other countries, leading to trade conflicts and reduced global economic cooperation.
Overall, protectionist policies are implemented to safeguard the interests of domestic producers and industries, but their impact on the broader economy and international relations needs to be carefully evaluated to strike a balance between protecting domestic industries and promoting free and fair trade.
Learn more about Protectionist policies
brainly.com/question/28198027
#SPJ11
This is a subjective question, hence you have to write your answer in the Text-Field given below. 7.6693 Construction rings are tested for their diameter desired to be within a certain range. Random samples of 5 rings are chosen from the despatch section and their diameter values measured. The sample mean X and standard deviations are found. After 20 samples. EX bar = 1850 and Es = 200. The specifications are 95 = 5 mm. [2x7=14] a. Find the control limits for the X bar and s-charts. b. Assuming that the process in control, estimate the process mean and process standard deviation c. Find the process capability indices Cp and Cpk and comment on their values. d. If the target value is 90 mm, find the capability indices Cpm and Cpmk. e. What proportion of the output is nonconforming, assuming a normal distribution of the quality characteristic? 1. If the process mean is moved to 92 mm, what proportion of the output is nonconforming? What are your proposals to improve process performance? g. Can we conclude that Cpk is less than 1? Use a = 0.05. 2This is a subjective question, hence you have to write your answer in the Text-Field given below. 7.6693 Construction rings are tested for their diameter desired to be within a certain range. Random samples of 5 rings are chosen from the despatch section and their diameter values measured. The sample mean X and standard deviations are found. After 20 samples, EX bar = 1850 and Es = 200. The specifications are 95 = 5 mm. [2x7=14] a. Find the control limits for the X bar and s-charts. b. Assuming that the process in control, estimate the process mean and process standard deviation. c. Find the process capability indices Cp and Cpk and comment on their values. d. If the target value is 90 mm, find the capability indices Cpm and Cpmk. e. What proportion of the output is nonconforming, assuming a normal distribution of the quality characteristic? 1. If the process mean is moved to 92 mm, what proportion of the output is nonconforming? What are your proposals to improve process performance? g. Can we conclude that Cpk is less than 1? Use a = 0.05.
a. Control limits for X bar chart:
Upper Control Limit (UCL) = 1850 + 1.494*200 = 2150.8
Lower Control Limit (LCL) = 1850 - 1.494*200 = 1549.2
Control limits for s chart:
Upper Control Limit (UCL) = 200 * 2.114 = 422.8
Lower Control Limit (LCL) = 200 * 0 = 0
b. Estimation of process mean: 1850 mm
Estimation of process standard deviation:
200 mm
c. Cp and Cpk = Lower specification limit = 95 mm
Upper specification limit = 105 mm.Cp = (USL-LSL)/(6σ) = (105 - 95)/(6 * 200) = 0.00083
Cpk = min{ (USL - µ)/3σ, (µ - LSL)/3σ} = min{ (105 - 1850)/3(200), (1850 - 95)/3(200)} = 0.5.
As Cpk is also less than 1, it indicates that process is not centered within the specification limits. Thus, this process needs to be improved. Reduce variability in the process. Improve monitoring and measurement of the process.
a. Control limits for X bar chart:
Upper Control Limit (UCL) = 1850 + 1.494*200 = 2150.8
Lower Control Limit (LCL) = 1850 - 1.494*200 = 1549.2
Control limits for s chart:
Upper Control Limit (UCL) = 200 * 2.114 = 422.8
Lower Control Limit (LCL) = 200 * 0 = 0
b. Estimation of process mean: 1850 mm
Estimation of process standard deviation:
200 mm
c. Cp and Cpk = Lower specification limit = 95 mm
Upper specification limit = 105 mm.Cp = (USL-LSL)/(6σ) = (105 - 95)/(6 * 200) = 0.00083
Cpk = min{ (USL - µ)/3σ, (µ - LSL)/3σ} = min{ (105 - 1850)/3(200), (1850 - 95)/3(200)} = 0.5.
Comment on their values: Since Cp is very less than 1, the process is not capable to meet the specification limits. As Cpk is also less than 1, it indicates that process is not centered within the specification limits. Thus, this process needs to be improved.
d. Cpkm = Min{Cpl, Cpu} = Min{3σ(μ - LSL), 3σ(USL - μ)} / (USL - LSL)
When target value is 90 mm,
LSL = 85 mm and USL = 95 mm. Cpm = |
Tolerance band width| / 6σ =(95-85) / (6*200) = 0.00083
Cpkm = Min{3σ(1850 - 85), 3σ(95 - 1850)} / (95 - 85)
Cpkm = Min{3*200*(1850-85), 3*200*(95-1850)}/(95-85) = 0.4067 (Minimum of Cpl and Cpu is Cpu)
d. Nonconforming proportion of output, assuming a
normal distribution = P(Z < (LSL - µ)/σ) + P(Z > (USL - µ)/σ)
where, µ = 1850 mm, σ = 200 mm, LSL = 95 mm and USL = 105 mm
P(Z < (95 - 1850)/200) + P(Z > (105 - 1850)/200)P(Z < -8.75) + P(Z > 8.75) is negligible. Therefore, the proportion of non-conforming output is negligible.
e. Nonconforming proportion of output, assuming normal distribution, if the process mean is moved to 92 mm,
P(Z < (95 - 92)/200) + P(Z > (105 - 92)/200)P(Z < 0.015) + P(Z > 0.065) = 0.0207 (approximately).
Therefore, the proportion of non-conforming output is 2.07%.
Proposal to improve process performance: Since both Cp and Cpk values are low, it indicates the process is not capable and is not centered within the specification limits. To improve process performance, following measures can be taken: Identify and remove the root cause of the problem. Adopt more capable machines. Implement process control techniques. Reduce variability in the process. Improve monitoring and measurement of the process.
g. As Cpk is 0.5 which is less than 1, we can conclude that the process is not capable of meeting the specification limits.
To know more about measurement visit:
https://brainly.com/question/2384956
#SPJ11
Palvest Company's ledger shows the following balances on December 31, 2020. 6% Preferred stock, $100 par value, outstanding 20,000 shares Common stock, $10 par value, Issued 300,000 shares Retained earnings $2,000,000 3,000,000 1,000,000 Required Assuming that the directors decide to declare total cash dividends in the amount of $810,000, use the following table to determine how much each class of stock should receive under each of the assumptions stated below. Three years' dividends are in arrears on the preferred stock.
$20,625 for preferred stockholders and $309,375 for common stockholders.
Palvest Company's ledger shows the following balances on December 31, 2020:Common stock, $10 par value, Issued 300,000 shares6% Preferred stock, $100 par value, outstanding 20,000 shares
Retained earnings
$2,000,000
3,000,000
1,000,000
Assuming that the directors decide to declare total cash dividends in the amount of $810,000 and the three years' dividends are in arrears on the preferred stock, how much each class of stock should receive under each of the assumptions stated below.
The first assumption is to pay the preferred dividend in full and distribute the balance of the dividends on a pro-rata basis. The second assumption is to pay the preferred dividend in full and then pay $1 per share on the common stock.Preferred dividend in full $20,000 x $100 x 6% = $120,000.Dividends in arrears 20,000 x $100 x 6% x 3 = $360,000.Total preferred dividends = $480,000.Balance for common stockholders $810,000 - $480,000 = $330,000.Total shares outstanding are 300,000 + 20,000 = 320,000 shares.(i) Under the first assumption, Preferred stock will receive $480,000 as follows:$120,000 (current year's preferred dividend) + $360,000 (dividends in arrears).The remaining amount of $330,000 is shared between preferred and common stocks according to the pro-rata basis.Pro-rata distribution:$330,000 x 20,000/320,000 = $20,625 for the preferred stockholders.$330,000 x 300,000/320,000 = $309,375 for common stockholders.(ii) Under the second assumption, Preferred stock will receive $480,000 as follows:$120,000 (current year's preferred dividend) + $360,000 (dividends in arrears).The remaining balance is $330,000, which will be distributed to common stockholders only.$330,000 / 300,000 common shares = $1.10 per share.
Hence, under the given assumptions, each class of stock should receive:$20,625 for preferred stockholders and $309,375 for common stockholders.
To know more about earnings visit:
https://brainly.com/question/28045589
#SPJ11
Find out what are the characteristics of workers representation
model in Sweden and Germany given their employment relations and
industrial relations system. Provide references to the
Findings.
In Sweden, there is a model known as the "Swedish Model" of labor relations, which is an important part of the social-democratic welfare state in Sweden. This model is based on cooperative industrial relations, which are characterized by three main elements: a centralized system of collective bargaining
Additionally, unions in Sweden have a strong presence in the workplace, and they are frequently consulted by management on issues that affect employees.In Germany, there is a different model of labor relations, known as the "co-determination model." This model is characterized by a legal requirement for worker representation on the supervisory boards of companies with more than 2,000 employees, and on the works councils that are elected by employees in individual workplaces. The co-determination model is designed to ensure that workers have a voice in the decisions that affect their jobs, and it has been credited with helping to create a more cooperative and productive industrial relations environment in Germany.
In Sweden, the system of worker representation is based on the idea of cooperative industrial relations. This system has a number of key characteristics that are designed to ensure that workers have a voice in decisions that affect their lives and livelihoods. The first of these characteristics is the centralized system of collective bargaining, which is conducted at both the national and industry levels. This system allows for the representation of a large portion of the workforce, as well as for the negotiation of agreements that cover working conditions, pay, and other important issues that affect workers. This system is supported by strong unions, which are able to represent workers in negotiations with employers and which have a strong presence in the workplace.
To know more about Swedish visit:
https://brainly.com/question/28403442
#SPJ11
Over the last year, houses have stayed the same price and most consumer goods have become cheaper. Food has become more expensive. According to the official Consumer Price Index, inflation was 5% last year. Sunny is very poor. What is likely to be true about the cost of living for Sunny?
a. All of these are true
b. Sunny's cost of living increased less than the official CPI
c. None of these are true
d. Sunny's cost of living increased by more than the official CPI
e. Sunny's cost of living increased exactly as fast as the official CPI
The most likely statement that is true about Sunny's cost of living is "Sunny's cost of living increased less than the official CPI." (Option b)
The information provided states that houses have stayed the same price and most consumer goods have become cheaper, which suggests a decrease in the cost of living for Sunny. However, it also mentions that food has become more expensive, which could partially offset the overall decrease. Considering the official CPI inflation rate of 5%, it is likely that Sunny's cost of living increased, but at a lower rate than the official CPI. This is because the overall decrease in the prices of consumer goods and houses may outweigh the increase in food prices. Therefore, the answer is b) Sunny's cost of living increased less than the official CPI is the most reasonable conclusion based on the information provided.
Learn more about CPI inflation rate here:
https://brainly.com/question/31129894
#SPJ11
What organizational practices (i.e., detailed actions
organisations take) are being used to address discrimination within
recruitment in organisations in Australia?
Analyse the weaknesses and strength
The organizational practices that are being used to address discrimination within recruitment in organizations in Australia are as followed:
1. Plan your approach to ensure you comply with your obligations to prevent discrimination in recruitment processes
2. Educate others involved in the recruitment process about their obligations
3. Cast the net as widely as possible to attract a diverse pool of applicants
4. Be consistent and fair in the way you treat candidates
5. Accommodate people who require adjustments
6. Do not seek irrelevant personal information from applicants
7. Focus on the essential requirements of the job
8. Set aside personal bias, myths and stereotypes
9. Keep records of your decisions
10. Select the person best suited to the job.
What is workplace discrimination?
Generally speaking, employment discrimination occurs when a company treats a candidate or employee unfairly because to that person's race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
Race, Color, and Sex are the three main categories of employment discrimination.
Direct, indirect, verbal, physical, and sexual harassment are the four basic forms of discrimination.
Race and national origin are currently the two most common categories of job discrimination. When individuals of one nationality start a firm and exclusively hire individuals of the same nationality, this is referred to as discrimination based on national origin.
To learn more on workplace discrimination :
https://brainly.com/question/14464014
#SPJ4
Please answer the question below:
What motion would be used to try to eliminate an expert witness? O A Frye motion A Daubert motion Motion of limine O Motion of challenge
The motion that would be used to try to eliminate an expert witness is a Daubert motion.
A Daubert motion is a legal motion filed during a trial to challenge the admissibility of expert testimony. It is based on the Daubert standard, which establishes the criteria for the reliability and relevance of scientific evidence. This motion allows a party to argue that the expert witness's testimony should be excluded or limited because it fails to meet the required standards. By filing a Daubert motion, the party seeks to persuade the court that the expert's testimony lacks scientific validity or does not pertain to the case. Ultimately, the court will make a determination on the admissibility of the expert witness based on the arguments presented.
learn more about Daubert motion here:
https://brainly.com/question/29629263
#SPJ11
a reduction in the interest rate causes consumption and investment to _____, which shifts the aggregate demand curve _____.
A reduction in the interest rate causes consumption and investment to increase, which shifts the aggregate demand curve to the right.
When the interest rate decreases, borrowing costs become cheaper, making it more attractive for individuals and businesses to take loans and make investments. This leads to increased consumer spending and higher investment levels, resulting in an overall increase in aggregate demand.
As a result, the aggregate demand curve, which represents the total spending in the economy at different price levels, shifts to the right, reflecting the higher level of consumption and investment. This shift indicates an expansionary effect on the economy, potentially leading to higher output and employment levels.
To know more about economy visit-
brainly.com/question/30205155
#SPJ11
please answer both questions and it should be of 250 words. write answer according to leadership perspective.
Ideas that should be explored in the journal are: • Your definition of leadership and how that contributes to and/or disrupts team excellence. The complexities of team processes, team leadership, coaching and mentoring. Consider what makes a team leader great and how this can be achieved on a daily basis. The reflection questions found in the textbook chapter summaries are a good starting point. however, your journal entries should reflect on the entirety of the course content group discussions, and your own insights into leadership and team bullding. The typical final word count for each journal entry is 250 words.
Team processes refer to the way in which teams operate and the procedures they follow in order to achieve their objectives.
Team leadership, on the other hand, refers to the abilities of the individual or individuals in charge of a team to motivate, guide, and direct them towards achieving their goals. Coaching and mentoring refer to the act of providing guidance and advice to team members in order to help them grow and develop.
The complexities of team processes can be attributed to a number of factors.
Firstly, teams are composed of individuals, each with their own strengths and weaknesses. This means that there will inevitably be conflicts and disagreements, and that team members will need to learn how to work together effectively.
Secondly, team processes are often dependent on external factors such as the organization's culture, the team's budget, and the availability of resources. This means that team leaders must be able to adapt to changing circumstances and make decisions that are in the best interests of the team and the organization as a whole.
Thirdly, team processes are often complex because they involve a wide range of stakeholders, including customers, suppliers, and other external partners. This means that team leaders must be able to build strong relationships with these stakeholders and manage their expectations in order to ensure that the team can deliver on its promises.
Know more about the Team processes
https://brainly.com/question/6814881
#SPJ11
What are hot assets, and why are they important in the sale of a partnership interest?
b. Can a partnership have unrealized receivable if it has no accounts receivable? Why or why not?
Hot assets are assets that are likely to result in gains if sold and they usually include inventory, accounts receivable, depreciated real estate, and stock investments.
These are important in the sale of a partnership interest because they can cause an increase in the amount of gain or loss that is allocated to each partner.If the partnership has no accounts receivable, it can still have unrealized receivables. This happens when the partnership has not yet collected payment for services rendered or goods sold. These are known as accrued receivables and are treated similarly to accounts receivable for tax purposes.
To know more about investments visit:
https://brainly.com/question/15105766
#SPJ11
Ginger's husband works part-time and earns $8,000 a year. In 2020 the federal spousal amount was $13,229. How much can Ginger claim as a spousal tax credit? Her marginal tax rate is 20.5%. A $5,229 B) $845 C $784 D) $1,072
Ginger can claim a spousal tax credit of $3,835.35 x 20.5% = $784.06 (rounded to the nearest cent).
To calculate the spousal tax credit that Ginger can claim, we need to determine the eligible amount for the federal spousal amount tax credit and then apply her marginal tax rate to it.
The eligible amount for the federal spousal amount tax credit is calculated as follows:
Eligible Amount = (Maximum Spousal Amount - Spouse's Net Income) x 15%
In this case, the maximum spousal amount for 2020 was $13,229, and Ginger's husband had a net income of $8,000. Substituting these values into the formula, we get:
Eligible Amount = ($13,229 - $8,000) x 15%
Eligible Amount = $3,835.35
Therefore, Ginger can claim a spousal tax credit of $3,835.35 x 20.5% = $784.06 (rounded to the nearest cent).
So the correct answer is C) $784.
Learn more about tax credit from
https://brainly.com/question/29392158
#SPJ11
FILL THE BLANK. "Compared to sales promotions, ___.
Group of answer choices
advertising’s effect is relatively easier to measure
advertising provides relatively longer-term benefits
both A and B
none of the above"
Option "B". Sales promotion and advertising are marketing communication strategies.
Both advertising and sales promotion have their unique benefits and drawbacks.
Advertising provides a relatively longer-term benefit than sales promotion. This is because advertising creates brand awareness, and the consumers remember it for a long time. Advertising aims to create long-term brand recognition and consumer trust. Advertising's effects are relatively harder to measure than sales promotion.
Advertising provides long-term benefits because it helps create a brand, consumer loyalty, and brand awareness. Meanwhile, sales promotion is a short-term tactic that aims to boost sales quickly. The aim of sales promotion is to attract consumers with immediate incentives. Sales promotion can be easily measured because it usually results in immediate sales.
Therefore, the most suitable option to fill the blank is option B: advertising provides relatively longer-term benefits.
Learn more about marketing communication strategies: https://brainly.com/question/32408441
#SPJ11
For 2020 Abdullah Corporation reported net income $30,000; net sales $100,000; and average shares outstanding 5,000. There were preferred stock dividends of $5,000. What was the 2020 earnings per share?
5
19
10
15
The earnings per share for Abdullah Corporation in 2020 is $5. This means that for each outstanding share of common stock, the company generated $5 in earnings.
In 2020, Abdullah Corporation reported a net income of $30,000, net sales of $100,000, and had an average of 5,000 shares outstanding. There were preferred stock dividends of $5,000. To calculate the earnings per share for 2020, we need to subtract the preferred stock dividends from the net income and divide the result by the average shares outstanding.
Earnings per share (EPS) is a financial metric that shows the portion of a company's net income that is attributable to each outstanding share of common stock. To calculate EPS, we first need to determine the earnings available to common shareholders.
In this case, we start with the net income of $30,000 and subtract the preferred stock dividends of $5,000. This gives us the earnings available to common shareholders, which is $25,000 ($30,000 - $5,000).
Next, we divide the earnings available to common shareholders by the average number of shares outstanding. In this case, the average shares outstanding is 5,000.
EPS = Earnings available to common shareholders / Average shares outstanding
EPS = $25,000 / 5,000
EPS = $5
Therefore, the earnings per share for Abdullah Corporation in 2020 is $5. This means that for each outstanding share of common stock, the company generated $5 in earnings.
Learn more about Earnings per share here:
https://brainly.com/question/31839918
#SPJ11
You are given an M/M/1 queueing system in which the expected waiting time and expected number in the system are 120 minutes and 8 customers, respectively. Using one hour as the unit of time determine the A. average expected customer's arrival rate, 1, B. average service rate C. the utilization factor p of the system.
The utilization factor (p) of the system is 0.264.
Given information: Expected waiting time (W) = 120 minutes
Expected number of customers (L) = 8 customers
λ (arrival rate) = ? μ (service rate) = ? Utilization factor (p) = ?
The formulae required to solve this problem are:
W = L/λ(μ - λ)p = λ/μ
where,
W: Expected waiting time L: Expected number of customers λ: Average arrival rate μ: Average service rate p: Utilization factor(A)
The average expected customer's arrival rate is
λ = L/Wλ = 8/120 = 1/15 customers per minute
λ = 1/15 × 60 = 4 customers per hour
Therefore, the average expected customer's arrival rate is 4 customers per hour.
(B) The average service rate is
μ = λ(W + 1)μ = λ(W + 1)/L
where W + 1 = expected time in the system= expected waiting time + expected service time= W + 1/μμ = λ(W + 1)/Lμ = λ(W + 1)/8μ = λ(120 + 1)/8μ = λ × 15.125
Therefore, the average service rate is 15.125 customers per hour.
(C) The utilization factor (p) of the system is p = λ/μp = 4/15.125
p = 0.264
Therefore, the utilization factor (p) of the system is 0.264.
To know more about utilization visit:
https://brainly.com/question/32065153
#SPJ11
Guess which depreciation method will have the lower 10%-per-year PW of taxes between the following methods over a 6-year study period: P = $100, S = 0, and GI-OE = $50, and Te = 30%. Verify your answe
The depreciation method that will have the lower 10%-per-year present worth (PW) of taxes over the 6-year study period cannot be determined without knowing the specific depreciation methods being compared.
To determine which depreciation method will result in the lower PW of taxes, we need to compare different depreciation methods such as straight-line, declining balance, or any other method. Without specific information about the depreciation methods being considered, it is not possible to calculate or determine which method will yield a lower PW of taxes.
However, the given information about the cost (P), salvage value (S), and gain/loss on disposal (GI-OE) can be used to calculate the tax depreciation deductions and subsequently estimate the PW of taxes for each method. Additionally, the tax rate (Te) of 30% can be applied to the taxable income derived from the depreciation deductions to calculate the tax liability for each year.
Without specific information about the depreciation methods being compared, it is not possible to determine which method will result in the lower PW of taxes over the 6-year study period. To make a valid comparison, the specific depreciation methods and their respective depreciation rates need to be known.
To know more about depreciation method visit:
https://brainly.com/question/29355461
#SPJ11
Josephine's 15-year old daughter has been diagnosed with a severe and prolonged mental disbility. What is the maximum Canada Caregiver Tax Credit that she can claim in 2020?
Points: 1
$300
$341
$187
$1,091
The maximum Canada Caregiver Tax Credit that Josephine can claim in 2020 for her 15-year-old daughter with a severe and prolonged mental disability is $1,091.
The Canada Caregiver Tax Credit provides financial support to individuals who care for dependents with disabilities. In 2020, the maximum amount that could be claimed was $2,230 for a dependent with a severe and prolonged mental or physical disability. However, this amount is reduced by the dependent's net income. Since Josephine's daughter is 15 years old and has a severe and prolonged mental disability, she qualifies for the full amount of $2,230. However, this credit is non-refundable, meaning it can only reduce the amount of taxes owed but cannot create a refund. As a result, the maximum credit Josephine can claim in 2020 is $1,091, as determined by her daughter's net income and other factors.
learn more about Credit here:
https://brainly.com/question/30698297
#SPJ11
Which type of connector would be characterized by its ability to gain access to information more easily than others? Hubs Pulsetakers Gatekeepers
Gatekeepers are a type of connector that would be characterized by its ability to gain access to information more easily than others. Thus, option C is correct.
Among the connectors you suggested, “Gatekeepers” would be distinguished by its capacity to acquire access to information more easily than others.
In the context of connections, the phrase “gatekeeper” refers to individuals or entities with the authority to control access to information, resources, or opportunities. Gatekeepers serve as middlemen or custodians of specific information or assets, with the capacity to allow or prohibit access to others.
Individuals or entities that govern access to information or resources and have the authority to allow or restrict access to others are known as gatekeepers.
They are critical in managing the flow of information and identifying who has access to it. Gatekeepers, who have the authority or privilege to control access, may have easier access to information than other connectors such as hubs or pulse takers.
Learn more about the Gatekeepers connector, refer to:
https://brainly.com/question/31564312
#SPJ4
Substantive procedures examine whether there are material misstatements or errors in specific classes of transactions, account balances, and disclosures. Auditors’ considerations for the design of substantive procedures involve the (1) nature, (2) timing, and (3) extent of the substantive procedures. Which of the following consists of the elements that are related to the term "nature"?
(a) The availability of information, specific audit objectives, cost-effectiveness, nature and composition of classes of transactions and account balances.
(b) The acceptable level of detection risk and control risk, and the relevance to specific risk.
(c) The assessed risks of material misstatements and the relative advantages and disadvantages among different types of substantive procedures.
(d) The relationship among the substantive procedures to be performed, the billable hours and the audit fees to be charged
Substantive processes' "nature" elements include:
(a) Information availability: Relevant data and documents needed for substantive procedures must be accessible and reliable. The auditor must determine if the data needed to verify transactions, account balances, and disclosures is available.
(a) Specific audit objectives: This element requires determining substantive procedure goals and objectives. The auditor must identify the assertions and risks associated with the classes of transactions, account balances, or disclosures being checked and devise processes to meet those objectives.
(c) Cost-effectiveness: The auditor must assess the cost-benefit of substantive procedures. Procedures should yield sufficient audit evidence at a low expense. The auditor should evaluate the risk of substantial misstatement and the complexity or volume of transactions or balances when calculating effort.
(d) Nature and composition of classes of transactions and account balances: This part involves understanding the characteristics and complexities of the classes being evaluated. These items' type, complexity, and composition determine the auditor's substantive methods.
Thus, (a) is the correct answer.
To know more about misstatements
https://brainly.com/question/31565379
#SPJ11