6. Menthol is a member of the terpene family of natural products. It exists in a (1R, 2S, 5R) form and a (IS, 2R, 5S) form. Are these two compounds enantiomers or diastereomers?
​​

Answer:

c. 10–14[H3O+]

Explanation:

On a calculator, calculate 10-8.34, or "inverse" log ( - 8.34). Example: What is the pOH of a solution that has a hydroxide ion concentration of 4.82 x 10-5 M? The hydroxide ion concentration can be found from the pOH by the reverse mathematical operation employed to find the pOH.

Ozone gas can be smelled in the air after a thunderstorm as a result of  reactions between oxides of nitrogen and volatile organic compounds.

Ozone gas can be produced due to chemical reactions between oxides of nitrogen and volatile organic compounds. This reaction occurs when pollututed gas is emitted from vehicles react and other activities with each other in the presence of sunlight.

So we can canclude that Ozone gas can be smelled in the air after a thunderstorm as a result of  reactions between oxides of nitrogen and volatile organic co

Learn more about ozone here: https://brainly.com/question/520639

Answer:

c is correct option

according to the question.

Scientists classify organisms into three domains and six kingdoms. In Fungi kingdom are yeasts classified because they are heterotrophic. Therefore, option C is correct.

An organism is referred to be a heterotroph if it is unable to manufacture food on its own and must obtain it from other sources of organic carbon, primarily plant or animal materials.

All fungi are heterotrophic, which means they draw their energy from other living things.

Since they share some traits with fungi, such as the presence of chitin in their cell walls, extracellular digestion, saprophytic feeding, asexual reproduction by budding, and the ability to store food as glycogen, yeast cells are categorised as fungi.

Thus, option C is correct.

To learn more about the heterotrophic, follow the link;

https://brainly.com/question/11065112

#SPJ6

Answer:

Muller's ratchet is a paradigmatic model in population genetics which describes the fixation of a deleterious mutation in a population of finite size due to an unfortunate stochastic fluctuation.

Explanation:

Answer:

Muller's ratchet is a paradigmatic model in population genetics which describes the fixation of a deleterious mutation in a population of finite size due to an unfortunate stochastic fluctuation.

Explanation:

This is the correct answer took a test and got this correct thank you to the original user above.

Answer:

437.5 mL

Explanation:

Concentration (c) = Moles (n) / Volume of solution (liters)

C = n / V

rearrange the formula to find out how many moles you need in the final solution.

n (moles) = concentration (c)   x   Volume (V)   ( in liters)

Convert your mL into L.  1500mL is 1.5L

n = 3.5 moles/liter  x  1.5 liters  (the liters cancel each other out)

n = 5.25 moles

Now use the same formula to calculate the volume you need to make the final solution based on the concentration of the original.

c = n/V  or   V = n / c

V = 5.25 moles / 12 moles/liter     here the moles cancel out

V = 0.4375 L

convert back to mL

V = 437.5 mL

Answer:

Answer: pH = 2.72

Explanation:

Calculate the pH of 0.010 M HNO2 solution. The K, for HNO2 is 4.6 x 104 

Answer:

[tex]53.55gNO[/tex]

Explanation:

Hello there!

In this case, according to the given chemical reaction, it is possible for us to calculate the produced grams of nitrogen monoxide by starting with 25.0 g of nitrogen via their 1:2 mole ratio and the molar masses of 30.1 g/mol and 28.02 g/mol, respectively and by some stoichiometry:

[tex]=25.0gN_2*\frac{1molN_2}{28.02gN_2}*\frac{2molNO}{1molN_2}*\frac{30.01 gNO}{1molNO}\\\\=53.55gNO[/tex]

Best regards!

Answer:

F

Explanation:

The name of the given alkene is 2-methyl-1-propene. The correct option is A.

Alkenes are inorganic compounds. They are the series of hydrocarbons, that are formed by carbon-carbon double bonds. To find out alkenes, you have to see that the number of hydrogen atoms is always double the number of carbons.

Propene is an unsaturated compound, which is the second-simplest compound, and it contains a single double bond, and it is a colorless gas and has a texture of petroleum jelly.

CH₃C = CH₂

I

CH₃

Here, the three CH₃ are shown in the diagram, so it will be the methyl because it contains 3 CH₂, and now see the propene means one double bond and four carbon atoms. So it will be the 2-methyl-1-propene.

Thus, the correct option is A. 2-methyl-1-propene.

To learn more about alkenes, refer to the link:

https://brainly.com/question/13910028

#SPJ2

I haven't done these in some time, so I'm not sure if they are 100% right.

1) 6.3 moles of H2( 2 mol of NH3 / 3  mol of H2)= 4.2 mol of NH3

6.3 moles of H2( 2 mol of NH3/ 3 mol of H2)(17.04 g of NH3/1 mol NH3)= 71.57 g of NH3

2) 2.5 moles of N2(2 mol of NH3/1 mol of N2)= 5 moles of NH3

2.25 moles of N2(2 mol of NH3/ 1 mol of N2)(6.02x10^23 particles/ 1 mol of NH3)= 3.01x10^24 particles of NH3

3) 425 g of NH3(1 mol of NH3/17.04 g NH3)= 24.9 moles of NH3

425 g of NH3(1 mol of NH3/17.04 g of NH3)(1 mol of N2/2 mol of NH3)(28.02 g of N2/1 mol N2)= 349 g of N2

425 g of NH3(1 mol of NH3/17.04 g of NH3)(1 mol of N2/2 mol of NH3)= 12.5 mol of N2

4) 10 moles NH3(3 moles of H2/2 moles of NH3)= 15 moles H2

10 moles NH3(3 mol of H2/2 mol of NH3)(2.02 g of H2/1 mol of H2)= 30.3 g of H2

30.3 g = .0303 liters of H2

Answer:

N2 + H20

Explanation:

chemical equation balancer

Answer:

Yes.

Explanation:

Yes, this method is accurate just as the slow titration because in both type of titrations we want to measure the point at which the indicator change the colour of the solution. Both fast and slow titrations are the same in their function i.e. both tell us the point or the amount at which the indicator change the colour of the solution so we can conclude from this discussion that fast titration gives the same result just as the slow titration.

Answer:

3 × 10⁴ kJ

Explanation:

Step 1: Write the balanced thermochemical equation

C₃H₈(g) + 5 O₂(g) ⟶ 3 CO₂(g) + 4 H₂O(g) ΔH = -2220 kJ

Step 2: Calculate the moles corresponding to 865.9 g of H₂O

The molar mass of H₂O is 18.02 g/mol.

865.9 g × 1 mol/18.02 g = 48.05 mol

Step 3: Calculate the heat produced when 48.05 moles of H₂O are produced

According to the thermochemical equation, 2220 kJ of heat are evolved when 4 moles of H₂O are produced.

48.05 mol × 2220 kJ/4 mol = 2.667 × 10⁴ kJ ≈ 3 × 10⁴ kJ

Answer: The scientific method is an empirical method of acquiring knowledge that has characterized the development of science since at least the 17th century. It involves careful observation, applying rigorous skepticism about what is observed, given that cognitive assumptions can distort how one interprets the observation.

Explanation:

Hope this helps. :)

Answer: last one is right

Explanation: atoms of same element have always same number of protons but may have several isotopes which have different number of neutrons.

Answer:

id k exactly what your asking

Explanation:

Answer:

Mx will be less than My.

Explanation:

The correct option is - Mx will be less than My.

Because, liquid X have been higher viscosity and vapor pressure than liquid B.

Vapor pressure of liquid A is greater, so the amount of liquid X will vaporized greater and H2 gas has been displaced greater from the beaker as compared to liquid Y.

The amount of H2 in liquid Y remains greater in beaker as compared to liquid X.

So, Mx will be less than My.

Answer:

1. 2Al + Cl2 = Al2Cl2

2 TiCl4 + 2Na = Ti + 2NaCl2

3. H2O2 = H2O + O2

4. Na2S + 2HCl = H2S + 2NaCl

5. Mg(OH)2 + 2HCl = MgCl2 + 2H2O

1. 3O2 = 2O3

Answer:

1

Explanation:

Let's write the equation first:

[tex]C_{4}H_{10} + \frac{13}{2} O_{2} -> 4 CO_2 +5 H_{2}O[/tex]

So 1 mole of butane reacts to give 4moles of Carbon diOxide.

thus , 0.25 mole of butane will react to give = 4 * 0.25= 1 mole Carbon diOxide

Answer:

I honestly don't know but I hope you get more points! ;D

Explanation:

Answer:

c substance

Explanation:

Matter is never destroyed or created in chemical reactions. The particles of one substance are rearranged to form a new substance. The same number of particles that exist before the reaction exist after the reaction.

Answer:

72.4%

Explanation:

Step 1: Write the balanced equation

2 Cu + S ⇒ Cu₂S

Step 2: Calculate the theoretical yield, in moles, from 0.0970 moles of Cu

The molar ratio of Cu to Cu₂S is 2:1.

0.0970 mol Cu × 1 mol Cu₂S/2 mol Cu = 0.0485 mol Cu₂S

Step 3, Convert the theoretical yield to mass

The molar mass of Cu₂S is 159.16 g/mol.

0.0485 mol × 159.16 g/mol = 7.72 g

Step 4: Calculate the percent yield

We will use the following expression.

%yield = experimental yield/theoretical yield × 100%

%yield = 5.59 g/7.72 g × 100% = 72.4%

Answer: Balanced molecular equation :

[tex]2Na_3PO_4(aq)+3(CH_3COO)_2Zn(aq)\rightarrow 6CH_3COONa(aq)+Zn_3(PO_4)_2(s)[/tex]

Total ionic equation:

[tex]6Na^+(aq)+3PO_4^{2-}(aq)+6CH_3COO^-(aq)+3Zn^{2+}(aq)\rightarrow 6CH_3COO^-(aq)+6Na^+(aq)+Zn_3(PO_4)_2(s)[/tex]  

The net ionic equation:

[tex]2PO_4^{3-}(aq)+3Zn^{2+}(aq)\rightarrow Zn_3(PO_4)_2(s)[/tex]

Explanation:

Complete ionic equation : In complete ionic equation, all the substances that are strong electrolyte are present in an aqueous state as ions.

Net ionic equation : In the net ionic equations, we are not include the spectator ions in the equations.

Spectator ions : The ions present on reactant and product side which do not participate in a reactions. The same ions present on both the sides.

When sodium phosphate and zinc acetate then it gives zinc phosphate and sodium acetate as  product.

The balanced molecular equation will be,

[tex]2Na_3PO_4(aq)+3(CH_3COO)_2Zn(aq)\rightarrow 6CH_3COONa(aq)+Zn_3(PO_4)_2(s)[/tex]

The total ionic equation in separated aqueous solution will be,

[tex]6Na^+(aq)+2PO_4^{3-}(aq)+6CH_3COO^-(aq)+3Zn^{2+}(aq)\rightarrow 6CH_3COO^-(aq)+6Na^+(aq)+Zn_3(PO_4)_2(s)[/tex]

In this equation, and  are the spectator ions.

By removing the spectator ions from the balanced ionic equation, we get the net ionic equation.

The net ionic equation will be,

[tex]2PO_4^{3-}(aq)+3Zn^{2+}(aq)\rightarrow Zn_3(PO_4)_2(s)[/tex]

Answer:

1 × 10⁻⁵ M

Explanation:

Step 1: Given data

Step 2: Convert the concentration of chlorine from mg/L to g/L

We will use the conversion factor 1 g = 10³ mg.

1 mg/L × 1 g/10³ mg = 1 × 10⁻³ g/L

Step 3: Convert the concentration of chlorine from g/L to mol/L (molar)

We will use the molar mass of chlorine: 70.91 g/mol.

1 × 10⁻³ g/L × 1 mol/70.91 g = 1 × 10⁻⁵ mol/L = 1 × 10⁻⁵ M

6.45 mole of fluorine are  required to completely react with 2.15 mole of sulfur according to the stoichiometry of the reaction .

It is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.

Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.

In the given example the balanced chemical reaction is as follows:

S +3 F₂ [tex]\rightarrow[/tex] SF₆

According to the reaction, 1 mole of sulfur reacts with 3 moles of fluorine to yield 1 mole of sulfur hexafluoride.

∴2.15 mole of sulfur requires 2.15×3=6.45 mole of fluorine.

Hence, 6.45 mole of fluorine are required to completely react with 2.15 mole of sulfur.

Learn more about stoichiometry,here:

https://brainly.com/question/14935523

#SPJ2

Answer:

C) Organic Weathering

Explanation:

Heat and Cold

And if some people start reporting and making fun of me in this answer don't listen to them.

They are hunting me down.

Answer:

Performance Tasks 188; Instructional Videos 75

Explanation: