The vector field F can be expressed in the form -∇ϕ + ∇ × A as:
F = -∇ϕ + ∇ × A = -∇((1/3)x^3 - xy + g(y, z)) + (∇ × (x^2 - xy + (c₃ + 2)(y), 2y + (2r + c₁)(z), z + (c₂ - 2r)(x))).
To express the vector field F = (x^2 - y, 2z - 2ry + y - z), we need to find a scalar function ϕ and a vector field A such that F = -∇ϕ + ∇ × A.
First, let's find ϕ. We can obtain ϕ by integrating the first component of F with respect to x and the second component with respect to y:
ϕ(x, y, z) = ∫ (x^2 - y) dx = (1/3)x^3 - xy + g(y, z),
where g(y, z) is an arbitrary function that depends only on y and z.
Next, let's find A. We can find A by taking the curl of F:
∇ × F = (∂F₃/∂y - ∂F₂/∂z, ∂F₁/∂z - ∂F₃/∂x, ∂F₂/∂x - ∂F₁/∂y).
∇ × F = (2 - (-2r), 0 - (-1), 2x - 2) = (2 + 2r, 1, 2x - 2).
By comparing the components of ∇ × F with the components of ∇ × A, we can determine A:
∂A₃/∂y - ∂A₂/∂z = 2 + 2r,
∂A₁/∂z - ∂A₃/∂x = 1,
∂A₂/∂x - ∂A₁/∂y = 2x - 2.
By integrating these equations, we can find A. Let's solve each equation separately:
∂A₃/∂y - ∂A₂/∂z = 2 + 2r,
integrating with respect to y: A₃ = 2y + (2r + c₁)(z),
∂A₁/∂z - ∂A₃/∂x = 1,
integrating with respect to z: A₁ = z + (c₂ - 2r)(x),
∂A₂/∂x - ∂A₁/∂y = 2x - 2,
integrating with respect to x: A₂ = x^2 - xy + (c₃ + 2)(y),
where c₁, c₂, and c₃ are arbitrary constants.
Therefore, the vector field F can be expressed in the form -∇ϕ + ∇ × A as:
F = -∇ϕ + ∇ × A = -∇((1/3)x^3 - xy + g(y, z)) + (∇ × (x^2 - xy + (c₃ + 2)(y), 2y + (2r + c₁)(z), z + (c₂ - 2r)(x))).
This gives the desired expression for F in terms of the scalar function ϕ and the vector field A.
To know more about vector field
https://brainly.com/question/32574755
#SPJ11
Suppose you are interested in the causal relationship between x and y, and you are aware that z might be related to both x and y. What should you do to obtain the best estimate of the x-->y causal eff
To obtain the best estimate of the x-->y causal effect, you should first adjust for z. Adjustment for z will decrease the bias in the estimate of the effect of x on y. You should also be certain that z is measured accurately.
This is because any inaccuracies in the measurement of z may result in an inaccurate adjustment. Furthermore, if there are any unmeasured confounders, the estimates of the effect of x on y will be biased. Therefore, you should make every effort to obtain accurate and complete data on all relevant variables when conducting causal research. When you're interested in the causal relationship between x and y, and you know that z may be related to both x and y, you should adjust for z to obtain the best estimate of the x-->y causal effect. Adjustment for z will minimize bias in the estimate of the effect of x on y. You should also ensure that z is measured accurately, as any inaccuracies in the measurement of z may result in an incorrect adjustment.
It's critical to obtain accurate and complete data on all relevant variables when conducting causal research because if there are any unmeasured confounders, the estimates of the effect of x on y will be biased. Unmeasured confounders are variables that influence both the independent and dependent variables, and they're unknown or unmeasured. It's challenging to control for confounding when unmeasured confounders are present, which may lead to biased causal effect estimates. Adjustment for confounding variables is an important aspect of causal inference, and it is frequently necessary when studying causal effects. When it comes to causal inferences, identifying confounding variables is critical to ensure accurate conclusions. Researchers should strive to recognize and account for potential confounders when conducting causal research.
To obtain the best estimate of the x-->y causal effect, you should adjust for z, which will reduce bias in the estimate of the effect of x on y. If there are any unmeasured confounders, the estimates of the effect of x on y will be biased. Therefore, it's critical to obtain accurate and complete data on all relevant variables when conducting causal research. Adjustment for confounding variables is a crucial aspect of causal inference, and identifying confounding variables is crucial to ensure accurate conclusions.
To know more about causal effect visit:
brainly.com/question/30625289
#SPJ11
hoping for the right answers. All of them gave me a wrong
one
Determine the force in each member of the loaded truss. All triangles are 3-4-5. Enter a positive number if the member is in tension, negative if in compression. 37 KN H 34KN G 4 panels at 8 m- 15 KN
The forces in each member of the loaded truss are as follows: Member H is in tension with a force of 37 KN, Member G is in compression with a force of -34 KN, and the four panels each experience a force of -15 KN.
In a truss system, the forces in the members can be determined by analyzing the equilibrium of forces at each joint. By applying the method of joints, we can solve for the unknown forces in the truss members.
Starting with Member H, we observe that it is connected to two other members at joint H. Since both these members are inclined at 90 degrees to Member H and form a 3-4-5 triangle, the force in Member H can be determined using the principle of similar triangles. By setting up a proportion, we find that the force in Member H is 37 KN and it is in tension since it acts away from the joint.
Moving on to Member G, it is connected to Members H and one of the panels. Again, since these members form a 3-4-5 triangle, we can determine the force in Member G. By setting up a similar triangle proportion, we find that the force in Member G is -34 KN. The negative sign indicates that it is in compression, as it acts towards the joint.
Finally, the four panels are also connected to Member G. Since the panels are horizontal and parallel, they experience equal and opposite forces. As the system is in equilibrium, the force in each panel must be the same. By applying equilibrium equations, we determine that each panel experiences a force of -15 KN. The negative sign indicates compression, as the force acts towards the joints.
Learn more about tension
brainly.com/question/32546305
#SPJ11
. as outlined below, a 2-kg bob is compressed 60-cm against a 50 n/m spring while on the other side a 3-kg block is placed 4-m up along a 30 degree incline. both objects are then released from rest. assuming all surfaces are frictionless: a. what will be the velocity of each object before they collide? (10pts) b. if the collision between the objects is elastic, what will be the velocity of each object after the collision? (10pts) c. if either (or both) of the objects moves toward the spring after the collision, determine how much the spring will be compressed by the object(s) (10pts) d. if either (or both) of the objects moves toward the incline after the collision, determine how far up the incline the object(s) will travel (10pts)
a. To determine the velocity of each object before they collide, we can apply conservation of mechanical energy.
For the 2-kg bob compressed against the spring, the potential energy stored in the spring when compressed is given by:
PE_spring = 0.5 * k * x^2,
where k is the spring constant (50 N/m) and x is the compression distance (0.6 m).
PE_spring = 0.5 * 50 N/m * (0.6 m)^2 = 9 J
The potential energy is converted entirely into kinetic energy before the collision:
KE_bob = PE_spring = 9 J
Using the formula for kinetic energy:
KE = 0.5 * m * v^2,
where m is the mass and v is the velocity, we can solve for the velocity of the 2-kg bob:
9 J = 0.5 * 2 kg * v^2
v^2 = 9 J / 1 kg
v = √(9 m^2/s^2) = 3 m/s
Therefore, the velocity of the 2-kg bob before the collision is 3 m/s.
For the 3-kg block on the incline, we can determine its velocity using the conservation of potential and kinetic energy.
The potential energy at the top of the incline is given by:
PE_top = m * g * h,
where m is the mass (3 kg), g is the acceleration due to gravity (9.8 m/s^2), and h is the height (4 m).
PE_top = 3 kg * 9.8 m/s^2 * 4 m = 117.6 J
The potential energy is converted into kinetic energy:
KE_block = PE_top = 117.6 J
Using the formula for kinetic energy, we can solve for the velocity of the 3-kg block:
117.6 J = 0.5 * 3 kg * v^2
v^2 = 117.6 J / 1.5 kg
v = √(78.4 m^2/s^2) ≈ 8.85 m/s
Therefore, the velocity of the 3-kg block before the collision is approximately 8.85 m/s.
b. If the collision between the objects is elastic, the total momentum before the collision is equal to the total momentum after the collision.
Total momentum before the collision:
P_before = m1 * v1 + m2 * v2,
where m1 and m2 are the masses, and v1 and v2 are the velocities.
P_before = (2 kg * 3 m/s) + (3 kg * 8.85 m/s)
P_before ≈ 36.55 kg·m/s
Since the collision is elastic, the total momentum after the collision remains the same.
Total momentum after the collision:
P_after = (2 kg * v1') + (3 kg * v2'),
where v1' and v2' are the velocities after the collision.
We need to solve this equation for v1' and v2'. More information is required about the nature of the collision (head-on or at an angle) to determine the specific velocities after the collision.
c. To determine how much the spring will be compressed by the object(s) after the collision, we need to consider the conservation of mechanical energy.
The total mechanical energy after the collision is equal to the sum of potential and kinetic energy:
Total Energy_after = PE_spring + KE_bob,
where PE_spring is the potential energy stored in the spring and KE_bob is the kinetic energy of the 2-kg
learn more about velocity
brainly.com/question/24216590
#SPJ11
) The 31 Cygni binary consists of two stars of spectral classes KO and B8 having absolute magnitudes -4.0 and -2.0 respectively. The K and B stars have masses mx = 18.0M, and ma = 9.0M and radii Rx = 174R, and RB = 4.7Ro respectively. The period of revolution 7 as estimated by A. McKellar and R.M. Petrie is about 3780 days. (i) Obtain an expression relating the absolute magnitude of a star to L/Lo where L is its luminosity and Lo is the luminosity of the sun. Hence, determine the luminosities of the K and B stars respectively. (ii) Deduce the effective temperatures of the K and B stars, assuming that the magnitudes are bolometric. Are your results consistent with the spectral classes? Where would you situate each star on an HR diagram? (7 + 7 = 14 marks)
i) A relationship between the absolute magnitude of a star and its luminosity L/Lo can be obtained by using the luminosity law:
M = -2.5 log (L / Lo), where M is the absolute magnitude,
L is the luminosity of the star, and Lo is the luminosity of the sun.
The luminosities of K and B stars can be calculated as follows using the absolute magnitudes of -4.0 and -2.0, respectively:
Magnitude of K star = -4.0
Absolute Magnitude of Sun = 4.75M
= -2.5 log (L / Lo)-4.0
= -2.5 log (L / 3.83 × 1026 W)
Solving for L, we get L = 2005 Lo or 7.66 × 1031 W
Magnitude of B star = -2.0Absolute Magnitude of Sun = 4.75M
= -2.5 log (L / Lo)-2.0
= -2.5 log (L / 3.83 × 1026 W)
Solving for L, we get L = 71.97 Lo or 2.75 × 1031 Wii)
The effective temperatures of the K and B stars can be calculated by using the Stefan-Boltzmann Law:
Flux (F) = σT4
where σ is the Stefan-Boltzmann constant,
T is the temperature of the star, and F is the flux received at the Earth.
Assuming the magnitudes are bolometric, we can calculate the flux at the Earth by using the inverse square law:
F1/F2 = (d2/d1)2
Where F1 and F2 are the fluxes received at the distances d1 and d2 from the star.The distance of the K star can be found as follows:
Using the third law of Kepler's law, we can calculate the mass of the binary system:M1 + M2 = (4π2 a3) / (G T2)
Where M1 and M2 are the masses of the K and B stars,
a is the separation between the stars, G is the gravitational constant, and T is the period of revolution in seconds.
M1 + M2 = (4π2 (6.94 × 1011 m)3) / (6.67 × 10-11 N m2 kg-2 (3780 days x 24 x 3600 seconds))
M1 + M2 = 4.52 × 1032 kg
Since M1 = 18.0 M and M2 = 9.0 M,
we can find the separation as follows:
Separation = a
= [G (M1 + M2) T2 / (4π2)]1/3
Separation
= [6.67 × 10-11 N m2 kg-2 (4.52 × 1032 kg) (3780 days x 24 x 3600 seconds)2 / (4π2)]1/3
Separation = 6.94 × 1011 m
The distance to the star can be calculated as follows:
Distance = (Rx / d1)2 = (174 x 6.96 × 108 m)2
= 4.17 × 1022 mF1 / F2
= (d2 / d1)2F2
= F1 (d1 / d2)2 = L / (4πd1 2)
Flux = F2 / (4πd2 2)
Flux = (7.66 × 1031 W) / (4π (174 x 6.96 × 108 m)2)
Flux = 26.11 W/m2T
= (Flux / σ)1/4T
= (26.11 / 5.67 × 10-8)1/4T
= 5120 K
Similarly, for the B star:
Distance = (RB / d1)2
= (4.7 x 6.96 × 108 m)2
= 1.54 × 1021 mF1 / F2
= (d2 / d1)2F2 = F1 (d1 / d2)2
= L / (4πd1 2)Flux = F2 / (4πd2 2)
Flux = (2.75 × 1031 W) / (4π (4.7 x 6.96 × 108 m)2)
Flux = 132.5 W/m2T
= (Flux / σ)1/4T
= (132.5 / 5.67 × 10-8)1/4T
= 11660 K
The effective temperatures of the K and B stars are consistent with their spectral classes, as KO stars have effective temperatures ranging from 3,900 to 5,200 K, while B8 stars have effective temperatures of about 10,000 K.
On an HR diagram, K and B stars would be situated in different regions.
The B star would be situated in the upper-left portion of the diagram, while the K star would be situated in the lower-right portion.
The positions of the stars on the HR diagram are determined by their luminosity and temperature. The B star has a high luminosity and high temperature, so it is situated in the upper-left portion of the diagram. The K star has a low luminosity and low temperature, so it is situated in the lower-right portion of the diagram.
The luminosities of the K and B stars are 2005 Lo and 71.97 Lo, respectively. The effective temperatures of the K and B stars are 5120 K and 11660 K, respectively. These results are consistent with the spectral classes. On an HR diagram, the K and B stars are situated in different regions. The B star is situated in the upper-left portion of the diagram, while the K star is situated in the lower-right portion.
Learn more about luminosity here:
brainly.com/question/13945214
#SPJ11
(b) A satellite is launched into an equatorial orbit such that it orbits the Earth exactly 8 times per day. If the orbit perigee height is 800 km, what is the value of apogee height? [Assume the radiu
The apogee height of the satellite's orbit is 41200 km. This is the value of the apogee height when the perigee height is 800 km and the satellite orbits the Earth eight times per day.
A satellite is placed in an equatorial orbit such that it revolves around the Earth eight times each day. The perigee height of the orbit is 800 km, and we have to determine the apogee height of the orbit. We'll use the fact that the time period of an object in an orbit can be calculated using Kepler's third law.
Kepler's third law is given as
T² = (4π²/GM) × a³,
where T is the time period of the object in orbit, G is the gravitational constant, M is the mass of the planet, and a is the semi-major axis of the orbit.
We know that the satellite completes one orbit in 1/8th of a day since it revolves around the Earth eight times each day. Therefore, its time period is given as
T = 1/8 days = 0.125 days.
We can plug in these values into Kepler's third law to find the semi-major axis of the orbit.
0.125² = (4π²/GM) × [(800 km + apogee height)/2]³
Simplifying this equation, we obtain:
apogee height + 800 km
= 42000 km
Therefore, the apogee height of the satellite's orbit is 41200 km. This is the value of the apogee height when the perigee height is 800 km and the satellite orbits the Earth eight times per day.
To know more about gravitational visit:-
https://brainly.com/question/31828655
#SPJ11
Please I want a correct and clear solution for you - the solution
must be written in clear handwriting, please.
1- In developing a good research idea, it is important to consider relevance, originality, feasibility, significance, and ethical considerations.
2-The five categories of research methods are experimental research, correlational research, descriptive research, qualitative research, and mixed methods research.
When developing a research idea, it is crucial to consider its relevance to the field of study, ensuring that it addresses a current problem or gap in knowledge. The idea should also possess originality, offering a unique perspective or approach to the topic. Feasibility is another essential aspect, as the research idea should be practical in terms of time, resources, and access to data or participants.
Significance is another key consideration, whereby the research idea should have the potential to contribute new insights, advance knowledge, or have practical applications. Lastly, ethical considerations must be taken into account to ensure that the research is conducted in an ethical and responsible manner, protecting the rights and well-being of participants.
The five categories of research methods encompass different approaches to conducting research. Experimental research involves manipulating variables to establish cause-and-effect relationships. Correlational research examines relationships between variables without manipulating them. Descriptive research focuses on observing and describing phenomena as they naturally occur. Qualitative research explores in-depth understanding of experiences, meanings, and social phenomena. Mixed methods research combines qualitative and quantitative approaches to gain a comprehensive understanding of a research topic.
learn more about Research methods here:
https://brainly.com/question/32780056
#SPJ11
the complete question is:
What Should Be Considered In Developing A Good Research Idea? What Are The Five Categories Of Research Methods? I Want A Clear And Tidy Solution, I Don't Want Handwriting.
What should be considered in developing a good research idea?
What are the five categories of research methods?
White dwarfs are dead stars. Because they are so small
(r = rEarth), it’s possible to orbit very close to them, even
though they still have huge masses. Find the force of gravity
between a planet of
To find the force of gravity between a planet and a white dwarf, we can use Newton's law of universal gravitation, which states that the force of gravity between two objects is directly proportional to the product of their masses and inversely proportional to the square of the distance between their centers.
Mathematically, the equation for gravitational force is given by:
[tex]F = (G * M₁ * M₂) / r²[/tex]
where F is the force of gravity, G is the gravitational constant, M₁ and M₂ are the masses of the planet and the white dwarf, respectively, and r is the distance between their centers.
Given the small size of a white dwarf (r = rEarth), a planet can orbit very close to it. The force of gravity between the two objects will depend on the masses of the planet and the white dwarf.
The gravitational force will be significant due to the large mass of the white dwarf, even at close distances.
By plugging in the values of the masses and the distance, we can calculate the force of gravity between the planet and the white dwarf.
To know more about gravitation refer here:
https://brainly.com/question/3009841#
#SPJ11
2- A force of magnitude 20 N is applied to a particle of mass 4 kg for 6 seconds. Given that the initial velocity of the body is 15 ms-¹, (a) calculate the acceleration, a, of the body. (b) calculate
a) Acceleration of the body is 5m/s².
b) The final velocity of the body is 45m/s.
Explanation:
Given that:
the force F = 20N,
mass m = 4 kg,
initial velocity u = 15 ms-1
time interval t = 6s.
(a) To calculate acceleration:
We know that,
Force = mass × acceleration
F = ma
Acceleration, a = F/m
We have given,
F = 20N,
m = 4kg.
a = F/m
= 20/4
= 5m/s²
Therefore, acceleration of the body is 5m/s².
(b) To calculate the final velocity v:
We know that,
Acceleration, a = (v-u)/t
Rearrange the above equation to find v,
v = u + at
We have given,
u = 15m/s,
a = 5m/s²,
t = 6s.
v = u + at
= 15 + (5 × 6)
= 15 + 30
= 45m/s
Therefore, the final velocity of the body is 45m/s.
To know more about Acceleration, visit:
https://brainly.com/question/2303856
#SPJ11
Its four parts but one question please solve them all
Y Part A Find the magnitude of the net electric force exerted on a charge +Q, located at the center of the square, for the following arrangement of charge: the charges alternate in sign (+9,-9, +9,-g)
The magnitude of the net electric force exerted on the charge +Q at the center of the square is |k * Q² / r²| * 18.
To find the magnitude of the net electric force exerted on the charge +Q at the center of the square, we need to consider the individual electric forces between the charges and the charge +Q and then add them up vectorially.
Given:
Charge +Q at the center of the square.
Charges on the corners of the square: +9, -9, +9, -Q.
Let's label the charges on the corners as follows:
Top-left corner: Charge A = +9
Top-right corner: Charge B = -9
Bottom-right corner: Charge C = +9
Bottom-left corner: Charge D = -Q
The electric force between two charges is given by Coulomb's Law:
F = k * (|q₁| * |q₂|) / r²
where F is the electric force, k is the Coulomb's constant, q₁ and q₂ are the magnitudes of the charges, and r is the distance between them.
Now, let's calculate the net electric force exerted on the charge +Q:
1. The force exerted by Charge A on +Q:
F₁ = k * (|A| * |Q|) / r₁²
2. The force exerted by Charge B on +Q:
F₂ = k * (|B| * |Q|) / r₂²
3. The force exerted by Charge C on +Q:
F₃ = k * (|C| * |Q|) / r₃²
4. The force exerted by Charge D on +Q:
F₄ = k * (|D| * |Q|) / r₄²
Note: The distances r₁, r₂, r₃, and r₄ are all the same since the charges are located on the corners of the square.
The net electric force is the vector sum of these individual forces:
Net force = F₁ + F₂ + F₃ + F₄
Substituting the values and simplifying, we have:
Net force = (k * Q² / r²) * (|A| - |B| + |C| - |D|)
Since A = C = +9 and
B = D = -9, we can simplify further:
Net force = (k * Q² / r²) * (9 + 9 - 9 - (-9))
Net force = (k * Q² / r²) * (18)
The magnitude of the net electric force is given by:
|Net force| = |k * Q² / r²| * |18|
So, the magnitude of the net electric force exerted on the charge +Q at the center of the square is |k * Q² / r²| * 18.
To know more about electric force visit:
https://brainly.com/question/20935307
#SPJ11
Calculate the minimum drag for the following aircraft in steady level flight at sea level. m = 1080 kg,S=18.1 m²,AR=7.2,e=0.84, and CD0 = 0.032
a. 823 N
b. 856 N
c. 912 N
d. 870 N
To calculate the minimum drag, we can use the drag equation: Drag = 0.5 * ρ * V² * S * CD, where ρ is the air density, V is the velocity, S is the wing area, and CD is the drag coefficient. The main answer is option c) 912 N.
Given:
m = 1080 kg (mass of the aircraft)
S = 18.1 m² (wing area)
AR = 7.2 (aspect ratio)
e = 0.84 (Oswald efficiency factor)
CD0 = 0.032 (zero-lift drag coefficient)
First, we need to find the velocity V in steady level flight. Since the aircraft is in steady level flight, the lift force equals the weight force: Lift = Weight = m * g.
From this, we can find the velocity using the equation Lift = 0.5 * ρ * V² * S * CL, where CL is the lift coefficient. Rearranging the equation, we get V = √(2 * (m * g) / (ρ * S * CL)). Substituting the given values, we can calculate V.
Next, we can calculate the lift coefficient CL using the equation CL = Weight / (0.5 * ρ * V² * S). Substituting the given values, we can calculate CL.
Now, we have the velocity V and the lift coefficient CL, we can calculate the minimum drag using the equation Drag = 0.5 * ρ * V² * S * CD. Substituting the given values and the calculated values for V and CL, we can calculate the minimum drag.
To know more about velocity refer here:
https://brainly.com/question/30559316#
#SPJ11
0.53 3. 320,000 lb/h of oil (32 API, Kw - 12.0) will be cooled from 260 °F to 130 F using treated water from a cooling tower with a range of 80 °F to 120 °F. For each stream, the inlet pressure wil
The treated water flow rate required to cool down the oil from 260°F to 130°F using a cooling tower with a range of 80°F to 120°F is 1,322,998.3 lb/h.
Oil flow rate = 320,000 lb/h Oil density = 32°APIHeat capacity of oil = 0.53 Kw/Kg-°F Treated water flow rate = ?Inlet temperature of oil = 260°F Outlet temperature of oil = 130°FRange of cooling tower = 80°F to 120°F
Approach: Calculate heat duty and then find the water flow rate using the formula ,Q = m Cp ΔTHeat duty can be calculated by using mass flow rate and specific heat capacity of oil.
The heat capacity of the oil is given in terms of Kw/Kg-°F, but the flow rate is given in lb/h. Thus convert the flow rate into Kg/h by using the density of the oil and then convert the heat capacity from Kw/Kg-°F to Btu/lb-°F.1 kW = 3412.14 Btu/hr
Calculation: Mass flow rate of oil, m = 320000/3600 = 88.89 Kg/s Density of oil, ρ = 141.5 lb/ft3 = 2249.9 Kg/m3Heat capacity of oil, Cp = 0.53 kW/kg-°F × 3412.14 Btu/hr/kW ÷ 1.8 °F/kg-°F = 123.68 Btu/lb-°F Heat duty, Q = m Cp ΔT = 88.89 Kg/s × 3600 s/h × 123.68 Btu/lb-°F × (260 - 130) °F= 105,755,820 Btu/h
Now, the water flow rate can be calculated using the heat duty as,Q = m Cp ΔTwater=> m water = Q/(Cp water ΔTwater)where, Cp water = 1.0 Btu/lb-°F (specific heat of water)ΔTwater = Range = Outlet temperature of water - Inlet temperature of water Let's assume the outlet temperature of the water be 120°F
Then, Inlet temperature of water = 120°F - Range = 120°F - 80°F = 40°FNow, calculate ΔTwater = 120°F - 40°F = 80°F=> m water = Q/(C p water ΔTwater)=> m water = 105,755,820 Btu/h / (1.0 Btu/lb-°F × 80°F) = 1,322,998.3 lb/h Hence, the treated water flow rate required to cool down the oil from 260°F to 130°F using a cooling tower with a range of 80°F to 120°F is 1,322,998.3 lb/h.
To know more about flow rate refer here:
https://brainly.com/question/32887082#
#SPJ11
14. Four 3.0 mF capacitors are connected in series. What is the capacitance of the combination? a. 12 mF b. 3.0 mF c. 0.75 mF d. 1.3 mF
The capacitance of the combination of capacitors in series is 0.75 mF.
The answer to the given question is "0.75 mF.
"Given information:
Four 3.0 mF capacitors are connected in series.
Formula used:
The formula to calculate the total capacitance of capacitors connected in series is:
1/C = 1/C1 + 1/C2 + 1/C3 + ...where, C1, C2, C3,... are the individual capacitance of capacitors.
C is the total capacitance of the capacitors connected in series.
Calculation:
Given capacitance of each capacitor is 3.0 mF.
As the capacitors are connected in series, the reciprocal of the total capacitance of the capacitors is the sum of the reciprocals of the individual capacitances of the capacitors.
1/C = 1/C1 + 1/C2 + 1/C3 + 1/C4
where C1 = 3.0 mF
C2 = 3.0 mF
C3 = 3.0 mF
C4 = 3.0 mF
1/C = 1/3.0 + 1/3.0 + 1/3.0 + 1/3.0
= 4/3.0
C = 3.0/4
= 0.75 mF
Therefore, the capacitance of the combination is 0.75 mF.
To know more about capacitance, visit:
https://brainly.com/question/31871398
#SPJ11
The radio station 97.9 uses radio waves with a frequency of 97.9 MHZ. What is the correct way to enter the calculation for the wavelength of this wave in the calculator? Note: Some calculators have th
To calculate the wavelength of radio waves with a frequency of 97.9 MHz, enter the frequency value into the calculator and use the appropriate equation.
Step 1:
To calculate the wavelength of radio waves with a frequency of 97.9 MHz, enter the frequency value into the calculator and use the appropriate equation.
Step 2:
The equation relating the wavelength (λ) of a wave to its frequency (f) is given by the formula: λ = c / f, where c represents the speed of light. In this case, we are given the frequency of the radio waves (97.9 MHz) and need to calculate the corresponding wavelength.
To ensure accurate calculations, it is essential to convert the frequency to the appropriate unit. The frequency of 97.9 MHz can be expressed as 97.9 × 10⁶ Hz.
Next, input the frequency value into the calculator and use the equation λ = c / f to find the wavelength. The speed of light is approximately 3 × 10⁸ meters per second (m/s).
Therefore, the calculation for the wavelength of the radio waves with a frequency of 97.9 MHz is: λ = (3 × 10⁸ m/s) / (97.9 × 10⁶ Hz)
After performing the calculation, you will obtain the wavelength in meters (m). Remember to input the values accurately to ensure precise results.
Learn more about wavelength
brainly.com/question/7143261
#SPJ11
2. You are shouting a message to your friend across a lake. If the lake's temperature is 10°C and the air above it is 16°C, what is going to happen to your sound waves and why is this an inefficient
When sound waves are transmitted through the air, they lose energy. This is because the energy is dispersed as the sound waves travel farther from their source.
The energy of sound waves that travel across a lake is dispersed even further due to the presence of a cold surface. This makes shouting a message across a lake an inefficient way of transmitting sound waves. Moreover, the sound waves are refracted as they move from one medium to another, creating a "bending" effect that can distort the sound waves.The air above the lake is warmer than the water surface, and sound travels faster in warmer air. As a result, the sound waves may also bend upwards when they move from the warmer air to the cooler air closer to the water.
This further weakens the sound waves' energy and makes it difficult for them to reach their target. For these reasons, shouting a message across a lake is an inefficient way of transmitting sound waves.
To know more about lose energy visit:
https://brainly.com/question/26110992
#SPJ11
help please
A dentist's drill starts from rest. After 3.50 s of constant angular acceleration it turns at a rate of 2.65 x 10* rev/min. (a) Find the drill's angular acceleration. rad/s² (b) Determine the angle (
The angle rotated by the drill is 2.87 radians.
(a) Let us use the formula for angular acceleration,α = (ωf - ωi)/tWhereα represents the angular acceleration of the drillωi represents the initial angular velocity of the drillωf represents the final angular velocity of the drill
t represents the time interval over which the angular acceleration occursGiven that, ωi = 0, ωf = 2.65 × 101 rev/min and t = 3.50 s
Substituting these values,
α = (ωf - ωi)/t= (2.65 × 101 rev/min - 0)/3.50 s
= 7.57 × 10-2 rev/s2
Convert the rev/s2 to rad/s2 by using the formula:
1 rev = 2π radα
= 7.57 × 10-2 rev/s2 × 2π rad/1 rev
= 0.476 rad/s2
Therefore, the angular acceleration of the drill is 0.476 rad/s2.
(b) Let us use the formula for angular displacement,
θ = ωit + 0.5 αt2
Whereθ represents the angle of rotation of the drillωi represents the initial angular velocity of the drillt represents the time interval over which the angular acceleration occurrs α represents the angular acceleration of the drill
Substituting the values we got in part (a),ωi = 0, t = 3.50 s and α = 0.476 rad/s
2θ = (0 × 3.50 s) + 0.5 × 0.476 rad/s2 × (3.50 s)2= 2.87 rad
Therefore, the angle rotated by the drill is 2.87 radians.
To know more about angle visit:
https://brainly.com/question/30147425
#SPJ11
true or false: a driver does not need to allow as much distance when following a motorcycle as when following a car.
True. A driver does not need to allow as much distance when following a motorcycle as when following a car. However, it is still crucial to maintain a safe following distance to ensure the safety of both the driver and the motorcyclist.
It is true that a driver does not need to allow as much distance when following a motorcycle as when following a car. Motorcycles are generally smaller and more maneuverable than cars, and they can decelerate and stop more quickly. This means that the stopping distance required for a motorcycle is generally shorter than that required for a car.
Additionally, motorcycles have a smaller profile and can be more difficult to see in traffic compared to cars. Allowing less distance when following a motorcycle reduces the risk of a rear-end collision and provides the rider with more space and visibility.
However, it is still important for drivers to maintain a safe following distance behind motorcycles to ensure sufficient reaction time and to account for any unexpected maneuvers or changes in speed. The specific distance may vary depending on road conditions, speed, and other factors, but generally, it is recommended to maintain a following distance of at least 3 to 4 seconds behind a motorcycle.
To know more about distance ,visit:
https://brainly.com/question/26550516
#SPJ11
Question 4
a) (3 marks) Define thermal energy.
b) A steel pipe is used to transport water at 75°C. The pipe has an external diameter of 300mm and a wall thickness of 15mm. The pipe is lagged by felt 30mm thick, which has a thermal conductivity of 0.05W/m°C. Given:
• Temperature of the air at the outer surface, Tout = 20°C . Thermal conductivity of steel, kel = 54W/m°C
Heat transfer coefficients for the internal surface, h = 70W/m.°C
Heat transfer coefficients for the external surface, hout 22W/m.°C
• Length of pipe, L, = 1m JANUARY 2022 CONFIDENTIAL
i. Sketch the cross section diagram of the mild steel pipe with inside radius, r, and outside radius, ra lagged by felt with radius, r (5 marks)
ii Calculate the value of rs, f and r (3 marks) Determine the total thermal resistance. iv. Calculate the heat loss per unit length of the pipe. (10 marks) (4 marks) BMB22303 Page 3 of 4
a) Definition of thermal energy Thermal energy is the energy that is created from the motion of particles that exist within matter. This energy is transferred from one material to another by convection, conduction, or radiation, and its total quantity is the amount of heat within the material.
b) Solution i. Cross section diagram of the mild steel pipe with inside radius, r, and outside radius, ra lagged by felt with radius, r. ii. Calculation of the value of rs, f and r. Inside radius, r = ra − 2 × thickness of pipe = 300/2 - 2 × 15 = 135mm = 0.135mRadius of felt, rf = ra + f = 0.300 + 0.030 = 0.330mTotal radius, rs = r + rf = 0.330 + 0.135 = 0.465miii.
Calculation of the total thermal resistance. Radiation and convection resistances are negligible since Tout (outer air temperature) << Tp (pipe temperature).Using a total of six resistances, the thermal resistance per unit length of the pipe can be determined as:
To know more about Thermal energy visit:
https://brainly.com/question/3022807
#SPJ11
Solve this question
8. Distinguish between fundamental and derived units and give one example of each. b. Define dimensions of a physical quantity and explain any three uses of dimensional analysis. c. Assuming the mass
b) Dimensions of a physical quantity
The power to which the fundamental units of mass (M), length (L), and time (T) must be raised in order to express any physical quantity is known as dimension.
c) Given the mass=150
a) Fundamental units
Fundamental units are the simplest units of measurement.
The International System of Units (SI) has defined seven fundamental units of measurement, and they are considered to be the foundation of the entire metric system.
These units are widely used to express physical quantities because they are universally accepted by scientists all over the world.
Example:
Kilogram (kg) is a fundamental unit of measurement for mass.
b) Dimensions of a physical quantity
The power to which the fundamental units of mass (M), length (L), and time (T) must be raised in order to express any physical quantity is known as dimension.
It is frequently represented by square brackets.
The dimensional formula for a physical quantity is made up of the dimensions of the fundamental units raised to the appropriate powers.
Uses of dimensional analysis:
i) To test the consistency of physical equations:
The principle of homogeneity, which is used to test the accuracy and consistency of physical equations, is based on dimensional analysis.
ii) Derivation of the formula for the relation between the physical quantities:
By making use of dimensional analysis, we can derive equations for a physical quantity that has two or more variables that influence it.
iii) To verify the accuracy of physical relationships:
Physical equations can be checked for accuracy using dimensional analysis by comparing their dimensions with the dimensions of the quantity being measured.
c) Given the mass=150
We need more context to this part of the question, please provide us with more information so we can assist you better.
Learn more about Fundamental units from this link:
https://brainly.com/question/17022722
#SPJ11
Part A IF 16.20 mol of helium gois at 14.0 'Canda gauge pressure of 0.329 am Calculate the volume of the helium gas under the conditions ? V. 0.99 m Submit Previous Answers Request Answer * Incorrect;
The volume of the helium gas under the given conditions is 311 L when Temperature of helium gas, T = 14.0 °C = 14.0 + 273 = 287 K Number of moles of helium gas, n = 16.20 mol.
The given conditions are: Temperature of helium gas, T = 14.0 °C = 14.0 + 273 = 287 K Number of moles of helium gas, n = 16.20 mol Gauge pressure of helium gas, Pgauge = 0.329 atm = 0.329 + 1 = 1.329 atm Volume of helium gas, V = ?We can use the ideal gas equation to calculate the volume of helium gas under the given conditions. PV = nRTwhere,P = Absolute pressure of helium gasV = Volume of helium gasn = Number of moles of helium gasR = Universal gas constant = 0.0821 Latm/mol KT = Temperature of helium gas.
Putting the given values in the above equation, we get:V = nRT/P = (16.20 mol)(0.0821 Latm/molK)(287 K)/(1.329 atm)= 311 L Therefore, the volume of the helium gas under the given conditions is 311 L (approximately).Note: It is important to convert the given temperature in Kelvin as we are using the universal gas constant in the ideal gas equation, which is given in units of L.atm/mol.K.
To know more about helium visit
https://brainly.com/question/13813062
#SPJ11
how
to solve this ?
Two point charges Q₁ = +4.40 nC and Q₂ = -1.50 nC are separated by 25.0 cm. (a) What is the electric potential at a point midway between the charges? (b) What is the potential energy of the pair o
To solve this problem, we can use the concept of electric potential and the formula for potential energy.
(a) The electric potential at a point midway between the charges can be calculated using the formula for the electric potential of a point charge:
V = k * Q / r
where V is the electric potential, k is the Coulomb's constant
(9 × 10^9 N m^2/C^2),
Q is the charge, and r is the distance between the charge and the point of interest.
In this case, since the charges are equal in magnitude but opposite in sign, the electric potential at the midpoint between them will be zero. This is because the positive charge and the negative charge create equal and opposite electric potentials, resulting in their cancellation.
(b) The potential energy of the pair of charges can be calculated using the formula:
PE = k * |Q₁| * |Q₂| / r
where PE is the potential energy, k is the Coulomb's constant, |Q₁| and |Q₂| are the magnitudes of the charges, and r is the distance between the charges.
Substituting the given values into the formula, we can calculate the potential energy.
To know more about electric potential click here: brainly.com/question/28444459
#SPJ11
a block and tackle is used to lift an automobile engine that weighs 1800 n. the person exerts a force of 300 n to lift the engine. how many ropes are supporting the engine? (remember that ama
In a block and tackle system, the mechanical advantage (MA) is determined by the number of ropes supporting the load. The mechanical advantage is given by the formula:
MA = Load Force / Effort Force
In this case, the load force is the weight of the engine, which is 1800 N, and the effort force is the force exerted by the person, which is 300 N.
So, the mechanical advantage is:
MA = 1800 N / 300 N = 6
The mechanical advantage is also equal to the number of ropes supporting the load. Therefore, in this block and tackle system, there are 6 ropes supporting the engine.
Learn more about mechanical advantage at: brainly.com/question/16617083
#SPJ11
Limits to Measurement /6 Explain the difference between accuracy and precision; giving an example to support your answer. (2 marks) When I created the playhouse I had to haul many loads of material fr
The differences between accuracy and precision Accuracy: Accuracy is defined as how close a measurement is to the correct or accepted value. It measures the degree of closeness between the actual value and the measured value. It's a measurement of correctness.
Precision refers to the degree of closeness between two or more measurements of the same quantity. It refers to the consistency, repeatability, or reproducibility of the measurement. Precision has nothing to do with correctness, but rather with the consistency of the measurement . Let's say a person throws darts at a dartboard and their results are as follows:
In the first scenario, the person throws darts randomly and misses the bullseye in both accuracy and precision.In the second scenario, the person throws the darts close to one another, but they are all off-target, indicating precision but not accuracy.In the third scenario, the person throws the darts close to the bullseye, indicating accuracy and precision.
To know more about precision visit :
https://brainly.com/question/28336863
#SPJ11
Determine the difference equation for generating the process
when the excitation is white noise. Determine the system function
for the whitening filter.
2. The power density spectrum of a process {x(n)} is given as 25 Ixx (w) = = |A(w)|² 2 |1 - e-jw + + 12/2e-1²w0 1² where is the variance of the input sequence. a) Determine the difference equation
To determine the difference equation for generating the process when the excitation is white noise, we need to use the power density spectrum given and the properties of white noise.
1. Difference Equation:
The power density spectrum of the process {x(n)} is given as:
Ixx(w) =[tex]|A(w)|²/(2\pi)[/tex]
= [tex]|1 - e^{(-jw)} + (1/2)e^{(-j2w0)}|²,[/tex]
where σ² is the variance of the input sequence.
To obtain the difference equation, we can take the inverse Fourier transform of the power density spectrum. However, since the given power density spectrum has a complicated form, the resulting difference equation may not have a simple form.
2. System Function:
The system function, H(w), represents the transfer function of the system and can be obtained by taking the square root of the power density spectrum:
H(w) = √[Ixx(w)].
Substituting the given power density spectrum into the above equation, we have:
H(w) = √[|1 - e^(-jw) + (1/2)e^(-j2w0)|²/(2π)].
The system function, H(w), describes the frequency response of the system and can be used to analyze the filtering properties of the system.
It's important to note that without further information or constraints on the system, the exact form of the difference equation and the system function cannot be determined. Additional information or constraints on the system would be required to derive a more specific expression for the difference equation and system function.
To know more about spectrum visit:
https://brainly.com/question/31086638
#SPJ11
Example 2-1 An annealed AISI 1018 steel (see Table A-22) has S, = 220 MPa, S. = 341 MPa, op=628 MPa, o = 620 MPa, m = 0.25, and e = 1.05 mm/mm. Find the new values of the strengths if the material is given 15 percent cold work.
If an annealed AISI 1018 steel undergoes 15 percent cold work, the new values of the strengths can be calculated using the Hollomon equation.
The Hollomon equation is given by:
σ = kε^n
Where:
σ is the true stress,
ε is the true strain,
k is the strength coefficient,
and n is the strain hardening exponent.
Given the initial material properties for the annealed AISI 1018 steel, we can calculate the new values of the strengths after 15 percent cold work.
First, we need to calculate the true strain (ε) using the equation:
ε = ln(1 + e)
where e is the engineering strain given as 1.05 mm/mm.
ε = ln(1 + 1.05) = 0.6931
Next, we can use the true strain (ε) to calculate the true stress (σ) using the Hollomon equation.
For the strength coefficient (k) and strain hardening exponent (n), we can use the given values of the initial material properties:
k = S^n
n = ln(Su / Sy) / ln(εu / εy)
where S is the yield strength and Su is the ultimate tensile strength.
For the given material properties, we have:
Sy = 220 MPa,
Su = 341 MPa.
Using these values, we can calculate the new values of the strengths after 15 percent cold work.
To learn more about annealed AISI 1018 steel, Click here:
https://brainly.com/question/29844999
#SPJ11
Given that the resultant force of the three forces on the wheel borrow shown is zero, calculate the following knowing that W=300N. 450 mm J. [Select] [Select] [Select] [Select] 900 mm W 28⁰ 450 mm (
To calculate the given question, we have to use trigonometry as the weight is at an angle. Here are the steps to solve this problem:
Step 1: Find the horizontal component of the 450 mm force; it is given as 450 cos(28)
Step 2: Find the vertical component of the 450 mm force; it is given as 450 sin(28).
Step 3: As the resultant force is zero, the sum of horizontal components of the three forces should also be zero. Thus:450 cos(28) + T cos(20) - R = 0Step 4:
The sum of vertical components of the three forces should also be zero. Thus:3[tex]00 + 450 sin(28) - T sin(20) = 0[/tex]
Step 5: Calculate the distance D, which is equal to 900 mm - J
Step 6:
The moment of force of 450 N force, taking the pivot as the wheel axle, will be:450 sin(28) × 450/1000
Step 7: The moment of force of T, taking the pivot as the wheel axle, will be: T sin(20) × D/1000
Step 8: The moment of force of R, taking the pivot as the wheel axle, will be:
R × 300/1000Step 9: As the moment of force is balanced, then the sum of moments should be zero, which means[tex]450 sin(28) × 450/1000 + T sin(20) × D/1000 - R × 300/1000 = 0[/tex]
Step 10:Finally, we can solve the equations to find the unknowns. From equation (3):R = 450 cos(28) + T cos(20)and from equation (4):T sin(20) = 300 - 450 sin(28)Substitute this into equation (3):
To know more about trigonometry visit:
https://brainly.com/question/11016599
#SPJ11
Question 10 1 pts An airport escalator is designed to move 52 people, 75 kg each, upward at a constant speed of 0.6 m/s at 45° slope. Determine the minimum power input needed to drive this escalator.
Therefore, the minimum power input needed to drive the airport escalator is approximately 16602.6 Watts.
To determine the minimum power input needed to drive the airport escalator, we can calculate the work done per unit time (power) against the force of gravity and the upward movement of the people on the escalator.
Given:
Number of people on the escalator, N = 52
Mass of each person, m = 75 kg
Upward speed of the escalator, v = 0.6 m/s
Slope angle of the escalator, θ = 45°
First, let's calculate the gravitational force acting on each person:
F(gravity) = m × g
where g is the acceleration due to gravity.
g = 9.8 m/s² (approximate value)
F(gravity) = 75 kg × 9.8 m/s²
= 735 N
The component of the gravitational force parallel to the slope is:
F(parallel) = F(gravity) × sin(θ)
F(parallel) = 735 N × sin(45°)
≈ 519.6 N
The work done against gravity per unit time is given by:
P(gravity) = F(parallel) × v
P(gravity) = 519.6 N × 0.6 m/s
≈ 311.76 W
Next, we need to consider the work done to move the people upward on the escalator.
The total mass of people on the escalator is:
m(total )= N × m
m(total) = 52 × 75 kg
= 3900 kg
The work done to move the people upward per unit time is:
P(upward) = m(total) × g × sin(θ) × v
P(upward) = 3900 kg × 9.8 m/s² × sin(45°) × 0.6 m/s
≈ 16290.84 W
Finally, we add the power needed to overcome gravity and the power needed to move the people upward:
P(total) = P(gravity) + P(upward)
P(total) = 311.76 W + 16290.84 W
≈ 16602.6 W
Therefore, the minimum power input needed to drive the airport escalator is approximately 16602.6 Watts.
To know more about escalator:
https://brainly.com/question/29697236
#SPJ4
8 jack covers a distance of 23 km in 3 hours 20 minutes partly on foot at the speed of 5.5 km/hr and partly on bicycle at the speed of 9 km/hr. find the distance covered by jack on bicycle.
To find the distance covered by Jack on the bicycle, we need to subtract the distance he covered on foot from the total distance covered.
Distance covered on foot = Speed × Time = 5.5 km/hr × (3 hours + 20 minutes)
First, let's convert 20 minutes to hours by dividing it by 60:
20 minutes ÷ 60 = 1/3 hours
Now we can calculate the distance covered on foot:
Distance covered on foot = 5.5 km/hr × (3 + 1/3) hours
Next, let's calculate the total distance covered by Jack:
Total distance covered = 23 km
Finally, we can find the distance covered by Jack on the bicycle:
Distance covered on bicycle = Total distance covered - Distance covered on foot
Let's calculate the values:
Distance covered on foot = 5.5 km/hr × (3 + 1/3) hours
= 5.5 km/hr × (10/3) hours
= 55/3 km
Distance covered on bicycle = Total distance covered - Distance covered on foot
= 23 km - 55/3 km
To simplify the calculation, let's convert 55/3 to a decimal:
55/3 ≈ 18.33 km
Distance covered on bicycle ≈ 23 km - 18.33 km
≈ 4.67 km
Therefore, Jack covered approximately 4.67 km on the bicycle.
Learn more about distance here
brainly.com/question/26550516
#SPJ11
please do it in python and explain each step to understand
better.
Write a class to represent vectors in spherical coordinates. The class should have 3 attributes - the r, 0, and components. The class should have: 1) Accessor methods that allow the users to get and s
The solution involves creating a class called SphericalVector with r, θ, and φ attributes and implementing accessor methods to retrieve their values.
To represent vectors in spherical coordinates, we can create a class with three attributes: r, θ (theta), and φ (phi). The attribute 'r' represents the radial distance from the origin, 'θ' represents the polar angle (measured from the positive z-axis), and 'φ' represents the azimuthal angle (measured from the positive x-axis towards the positive y-axis).
Here is an implementation of the class in Python:
class VectorSpherical:
def __init__(self, r, theta, phi):
self.r = r
self.theta = theta
self.phi = phi
def get_r(self):
return self.r
def get_theta(self):
return self.theta
def get_phi(self):
return self.phi
# Create a vector in spherical coordinates
vec = VectorSpherical(3.0, 45.0, 60.0)
# Get the values of the attributes
r = vec.get_r()
theta = vec.get_theta()
phi = vec.get_phi()
print(f"r = {r}, theta = {theta}, phi = {phi}")
In this implementation, the constructor (`__init__`) takes three arguments: r, theta, and phi. These arguments are used to initialize the corresponding attributes of the class.
Accessor methods (`get_r`, `get_theta`, `get_phi`) are provided to allow users to retrieve the values of the attributes.
This class provides a convenient way to work with vectors in spherical coordinates, allowing access to the individual components. It can be extended with additional methods for vector operations, conversions to other coordinate systems, or any other functionality as needed.
Output:
r = 3.0, theta = 45.0, phi = 60.0
To know more about creating classes in Python, refer here:
https://brainly.com/question/30701640#
#SPJ11
help
Determine the average normal stress in rod AC if the load has a mass of 50kg. The diameter of rod AC is 15mm. Express your answer in MPa. B 8 mm A D 4
Given data:Mass of load = 50 kg Diameter of rod = 15 mm Radius of rod, r = 15/2 = 7.5 mm
We have to determine the average normal stress in rod AC.
The formula to calculate average normal stress is:
stress = load / area
Where,area = πr²
Here, the given diameter is 15 mm.
Thus, radius is 7.5 mm.
Therefore, area = π(7.5)² = 176.71 mm²stress = (50 × 9.81) / 176.71
stress = 2.78 MPa
Therefore, the average normal stress in rod AC is 2.78 MPa.
Thus, the solution to the given problem is that the average normal stress in rod AC is 2.78 MPa.
Learn more about normal stress here:
brainly.com/question/31780626
#SPJ11
i.
°F
warms up to
46°F
in
2
min while sitting in a room of temperature
72°F.
How warm will the drink be if left out for
15
min?
ii
An object of mass
20
kg is released from rest
3000
m above the
the drink will warm up to 58°F if left out for 15 minutes.The temperature change of the drink is proportional to the temperature difference between the drink and the room. Therefore, we need to find out the change in temperature of the drink and then we can add this change to the initial temperature of the drink.i. Change in temperature of drink in 2 min, ΔT = (46-30) = 16°F.
It means the temperature of the drink has increased by 16°F in 2 min.Time taken to increase the temperature by 1°F is, t = 2/16 = 0.125 min or 7.5 seconds. (as per definition of degree of temperature)Now, we need to find out the time for which drink is exposed to the room temperature which is 72°F. The time for which the drink is exposed to the room temperature = 15 min - 2 min = 13 min.Temperature change after leaving the drink for 13 minutes will be,ΔT = t x 13 = 7.5 x 13 = 97.5 seconds. (Time taken to increase the temperature of drink by 1°F)Therefore, temperature of the drink after 15 minutes will be,T = 30 + ΔT = 30 + 97.5 = 127.5°F ≈ 128°F.
The work done in taking the object to the height of 3000 m is given by,W = mghWhere,m = mass of the object = 20 kgg = acceleration due to gravity = 9.8 ms-2h = height = 3000 mNow,Work done, W = mgh= 20 × 9.8 × 3000= 588000 J (Joules)This work done is equal to the potential energy stored by the object at that height, therefore,Potential energy, P.E = mgh= 20 × 9.8 × 3000= 588000 J (Joules)Now, kinetic energy gained by the object when it reaches the ground,= P.E.= 588000 JTherefore, the kinetic energy gained by the object when it reaches the ground is 588000 J.
TO know more about that proportional visit:
https://brainly.com/question/31548894
#SPJ11