Answer:
Benzene must be kept away from flames.
Explanation:
Hello,
In this case since MSDS tables show the potential risks of chemical compounds, for benzene which which has a substantial vapor pressure and a fire rating of 3, which means that is highly flammable (very likely to get on fire), we conclude then that benzene must be kept away from flames due to its high risk. The other options are incorrect since it has 0 reactivity, it is nor fragile so it is not affected by shaking and it could be storage at standard pressures since it is a liquid at standard conditions as well.
Regards.
brainly or jiskha
choose wisely
Answer:brainly
Explanation:
absolutely brainly
full of help and knowledge
HELP !!
Question 5 Multiple Choice Worth 3 points)
(01.04 LC)
Which of the following is not an intensive physical property?
Magnetism
Boiling point
Thermal conductivity
Volume
It would be volume.
Volume is not an intensive property because it does change as the amount of substance increases or decreases. The rest of the properties are constant no matter the amount of substance.
Answer:
Volume
Look at the guy above me, okay-- they're smarter then me-
Chromium(III) oxide reacts with hydrogen sulfide (H2S) gas to form chromium(III) sulfide and water: Cr2O3(s) + 3H2S(g) → Cr2S3(s) + 3H2O(l) To produce 156 g of Cr2S3, (a) how many moles of Cr2O3 are required? mol (b) how many grams of Cr2O3 are required? g
Answer:
(a) 0.779 mol Cr₂O₃
(b) 118 g Cr₂O₃
Explanation:
Step 1: Convert 156 g Cr₂S₃ to moles
Cr Molar Mass - 52.00 g/mol × 2 = 104.00 g/mol
S Molar Mass - 32.07 g/mol × 3 = 96.21 g/mol
156 g Cr₂S₃ ÷ 200.21 g/mol = 0.779182 mol Cr₂S₃
Step 2: Find conversion from Cr₂S₃ to Cr₂O₃
1 mol Cr₂S₃ equals 1 mol Cr₂O₃
Step 3: Use Dimensional Analysis
0.779182 mol Cr₂S₃ · [tex]\frac{1 \hspace{2} mol \hspace{2} Cr_2O_3}{1 \hspace{2} mol \hspace{2} Cr_2S_3}[/tex] = 0.779182 mol Cr₂O₃
0.779182 mol Cr₂O₃ ≈ 0.779 mol Cr₂O₃ (3 significant figures)
Step 4: Convert moles to grams
Cr Molar Mass - 52.00 g/mol × 2 = 104.00 g/mol
O Molar Mass - 16.00 g/mol × 3 = 48.00 g/mol
0.779182 mol Cr₂O₃ · 152.00 g/mol = 118.436 g Cr₂O₃
118.436 g Cr₂O₃ ≈ 118 g Cr₂O₃ (3 significant figures)
What is the mass, in grams, of the ethyl alcohol that exactly fills a 220 mL container? The density of ethyl alcohol is 0.789 g/mL. Group of answer choices 170 g 173.58 g 280 g 278.833967 g
Answer:
[tex]m=173.58g[/tex]
Explanation:
Hello,
In this case, since the density is the ratio of the mass and volume:
[tex]\rho =\frac{m}{V}[/tex]
For the given density and volume, the correct mass which fills the given volume is:
[tex]m=\rho *V=0.789g/mL*220mL\\\\m=173.58g[/tex]
Best regards.
In the reaction between Li and O, there is a transfer of electrons making an ionic bond. In the bond, lithium would be a (n) because it an electron, and oxygen would be an) because it electrons. O A anion, loses, cation, gains B cation, gains, anion, loses Oc cation, loses, anion, gains O D anion, gains, cation, loses INTL 5
Answer:
C) cation, loses, anion, gains
Explanation:
Lithium is a metal from Group 1, so it has 1 valence electron. Thus, it loses 1 electron to complete its octet and form the cation Li⁺.
Oxygen is a nonmetal from Group 16, so it has 6 valence electrons. Thus, it gains 2 electrons to complete its octet and form the anion O²⁻.
In the reaction between Li and O, there is a transfer of electrons making an ionic bond. In the bond, lithium would be a cation because it loses an electron, and oxygen would be an anion because it gains 2 electrons.
Enzymes which are usually increase the rate of a reaction by________.
Observe: The Hollow pipe allows the water in each flask to move around and mix. Try several experiments with different temperatures in the top and bottom flasks.
Describe what you see
Draw the conjugate base for the acid (CH3)2C=OH+ Remember to include charges and non-bonding electrons where
necessary
Answer:
Explanation:
An acid is a substance that, when dissolved in water produces hydrogen ions, H⁺ as the only positive ion. e.g.
HCl ↔ H⁺ + Cl⁻
HNO₃ ↔ H⁺ + NO⁻₃
This process is known as ionization. The characteristics properties of an acid in solution are due to the presence of these hydrogen ions. In these reactions, the negative ions formed or sometimes the neutral compounds are usually known as the conjugate base of such acid.
From the given information, the conjugate base of the acid given can be seen in the attached image below.
The conjugate base for the acid is attached below.
What is an Acid?An acid is a substance that, when dissolved in water produces hydrogen ions, H⁺ as the only positive ion. e.g.
HCl ↔ H⁺ + Cl⁻
HNO₃ ↔ H⁺ + NO⁻₃
This process is known as ionization. The characteristics properties of an acid in solution are due to the presence of these hydrogen ions. In these reactions, the negative ions formed or sometimes the neutral compounds are usually known as the conjugate base of such acid.
The conjugate base of the acid given can be seen in the attached image below.
Find more information about Conjugate acid here:
brainly.com/question/22514615
how do you make chocolate milk
What will be the cost of gasoline for a 4,700-mile automobile trip if the car gets 41 miles per gallon, and the average price of gas is $3.79 per gallon?
Answer:
Idk
Explanation:
Find the gallons needed by dividing total miles by miles per gallon:
4700/41 = 114.634 gallons
Multiply the gallons needed by price per gallon:
114.634 x 2.79 = $319.83 Total
Round the answer as needed.
If gallons were rounded to 115 gallons total cost would be $320.85
$ 434.40
Explanation:41 miles ............ 1 gallon
4700 miles .......x gallon
x = 4700×1/41 = 114.63 gallons
114.63 gallons×$3.79 ≈ $ 434.40
Draw an important resonance form to show the delocalization of charge in the ion shown below.
Interactive 3D display mode
Answer:
Hello attached below is the missing ion diagram
Explanation:
Attached below is an important resonance form that shows the delocalization of charge in the ion shown
What is the term for a solution that is holding more dissolved solute than it should be able to at a particular temperature?
Explanation:
Sometimes, a solution contains more dissolved solute than is normally possible. This type of solution is said to be supersaturated. A saturated solution can become supersaturated if more solute is added while the temperature is raised.
hope it will help u ✌️
The solubility of sugar at 50°C is 260/100g water,and at 0°Cis 180g/100g water. What mass of sugar,will be deposited if 60g the saturated solution at 50°C is cooled to 0°C
Explanation:
27 °0 bc that how it is so this is the answer
What does 3.5 degree of unsaturation tell you?
Answer:
It means the chemical entity is a radical
Explanation:
When we talk of unsaturation, we are referring to the number of pi-bonds in a chemical entity. The alkane, alkene and alkyne organic family are used to as common examples to explain the term unsaturation.
While alkynes have 3 bonds, it must be understood that they have 2 pi bonds only and as such their degree of saturation is two.
In the case of an alkene, there is only one single pi bond and as such the degree of unsaturation is 1.
Now in this case, we have a fractional 0.5 degree of unsaturation alongside the 3 to make a total of 3.5. So what’s the issue here?
The fractional part shows that the chemical entity we are dealing with here is a radical. While the integer 3 shows that there are 3 pi-bonds, the half pi bond remaining tells us that there is a missing electron on one of the atoms involved in the chemical bonding and as such, the 1/2 extra degree of unsaturation tends to tell us this.
Kindly recall that a radical is a chemical entity within which we have at the least an unpaired electron.
The class measured the density of a copper block to be 8.6 +/-0.2 g/cm3 at the 95% confidence interval with a standard deviation of 0.4 g/cm. The true density of copper is 8.96 g/cm3.
a. What is the high and low number of the confidence interval range? Does the true value fall within the confidence interval?
high:
low:
within range?
b. What is the high and low of the standard deviation range? Does the true value fall within the standard deviation?
high:
low:
within range?
Answer: kindly check explanation
Explanation:
Given the following :
Measured density of copper block:
8.6+/-0.2 g/cm3
True density = 8.96g/cm3
Standard deviation = 0.4g/cm
a. What is the high and low number of the confidence interval range?
High : 8.6 + 0.2 g/cm3 = 8.8g/cm³
Low : 8.6 - 0.2 g/cm3 = 8.4g/cm³
Does the true value fall within the confidence interval? NO
Actual density = 8.96g/cm³ doses not lie in between (8.4 - 8.8)g/cm³
B.) High and low of the standard deviation range?
High = 8.6 + 0.4 = 9.0g/cm³
Low = 8.6 - 0.4 = 8.2g/cm³
Value falls within range of the true density value of copper block.
8.96g/cm³ falls in-between (8.2-9.0)g/cm³
Was the french revolution driving force behind the metric system?
Answer:
yes, they were
Explanation:
The history of the metric system began in the Age of Enlightenment with notions of length and weighttaken from natural ones, and decimal multiples and fractions of them. The system became the standard of France and Europe in half a century. Other dimensions with unity ratios[Note 1] were added, and it went on to be adopted by the world.
Who were the terrorists that attacked the united states on September 11, 2001
Uranium is a type of atom. In special circumstances that usually involve high amounts of energy, uranium can be broken. When this occurs, different pieces of the original atom remain, including a substance called plutonium. Which statement most likely describes plutonium? It will still be uranium, just smaller pieces of uranium. It must no longer be a form of matter. It must be a different kind of atom. It will be different than, but have the same properties as, uranium.
Answer:
It's c
Explanation:
I'm taking the test now on edge.
It must be a different kind of atom statement mostly likely describes plutonium. Hence option C is correct.
What are atoms?It is the smallest unit of matter that possess the properties of the chemical element. It can’t be an independently, they form ions and molecules they both are combine and form large numbers of matters.
Atoms are basically three types: Neutrons, protons and electrons.
In periodic table plutonium is above uranium. Plutonium is more powerful as compared to uranium because it is an isotope and more radioactive.
Almost all of naturally occurring. Uranium 92U238with a half-life of 4.468 x 109 year. Most rest of the natural uranium is92U235.
Uranium is generally used in the process of nuclear fission whereas plutonium is used for the production of nuclear weapons.
It must be a different kind of atom statement mostly likely describes plutonium. Hence option C is correct.
Learn more about atoms, here:
https://brainly.com/question/1566330
#SPJ6
A substance made up of one type of atom is called an(a) ______________.
A. element
B. compound
C. atom
A substance that cannot be converted into another substance is known as an element. Each type of atom that makes up an element is unique. The correct option is A.
A substance whose atoms all contain the same number of protons is said to constitute an element; alternatively, all the atoms of a certain element must contain the same number of protons. Chemical reactions cannot degrade elements since they are the simplest chemical forms.
A compound is created when two or more components join chemically in a predetermined mass ratio.
Thus the correct option is A.
To know more about elements, visit;
https://brainly.com/question/29545466
#SPJ6
Among the elements magnesium, sodium and silicon, which hås the highest second ionisation
energy? Explain.
Answer:
Explanation:
silicon has highest ionization energy ionization energy increases from left to right in a period because electron are added to same shell and increase in added electron shield each other poorly from the nuclear attraction
(b) Draw the structure of the products when cyclopentene is reacted with:
(i) Cold alkaline KMnO4
Answer:
See explanation and image attached
Explanation:
When an alkene is reacted with cold, dilute and alkaline KMnO4, the product of the reaction is a 1,2-diol (vicinal diol). The products exhibit a “syn” stereochemistry with the addition of the two -OH groups to the same side of the alkene.
The reaction of cyclopentene with cold, dilute, alkaline KMnO4 is shown in the image attached.
In the given query, when cyclopentene is reacted with cold alkaline [tex]\rm KMnO_4[/tex], the product formed is cis-1,2-cyclopentanedicarboxylic acid (image attached below).
The reaction proceeds via oxidative cleavage of the double bond in cyclopentene to form two carboxylic acid groups.
The potassium permanganate ([tex]\rm KMnO_4[/tex]) acts as a strong oxidizing agent and cleaves the double bond to form two carboxylic acid groups.
The reaction can be represented as follows:
Cyclopentene + cold alkaline [tex]\rm KMnO_4 \rightarrow[/tex] cis-1,2-cyclopentanedicarboxylic acid
Therefore, the product, cis-1,2-cyclopentanedicarboxylic acid (refer to the attached image below), has a cyclopentane ring with two carboxylic acid groups attached to the 1 and 2 carbons, respectively.
Learn more about reaction here:
https://brainly.com/question/28546817
#SPJ3
What is the mass in grams of each of the following samples? 1.505 mol of Ti 0.337 mol of Na
Answer:
72.04g Ti and 7.75g Na
Explanation:
1.505 mol Ti x (47.87g/1 mol) = 72.04g Ti
0.337 mol Na x (22.99g/1 mol) = 7.75g Na
72.04g Ti and 7.75g Na mass in grams of these samples.
What is molecular mass ?Molecular mass can be determined by the measure of mass related to a molecule which is otherwise called as atomic weight, means the mass of every atom present in the molecule.
For example, water have 2 hydrogen atoms and 1 oxygen atom, the molecular mass of water is equals to the normal atomic mass of hydrogen increased by two or more the atomic mass of oxygen.
molecular mass can be controlled by many factors like Mass Spectrometry which is used to decide the mass of little molecule which is otherwise called as monoisotopic mass.
It can also be controlled by Hydrodynamic Strategy requires calibration and determine the relative atomic weight; Static Light Scattering where the Molecular weight is determined from the measure of light dispersed utilizing the Zimm technique.
So, 1.505 mol Ti x (47.87g/1 mol) = 72.04g Ti
0.337 mol Na x (22.99g/1 mol) = 7.75g Na, hence the answer is 72.04g Ti and 7.75g Na
Learn more about mass, here:
https://brainly.com/question/18446366
#SPJ2
someone help. what is the missing word?
a. acceleration
----------------------
chemical test of acetylene in the laboratory
(0.0046 x 15000.0) + (2817 x 13)
Answer:
36690
Explanation:
Explain the role that gravitation played in the formation of the Moon after the large planetesimal hit Earth.
Answer:
The gravity pulled the bits back and formed a ball which is the moon
Explanation:
hope this helps :)
Answer:
While some of the debris from the collision merged back into Earth, the gravity caused the accretion of much of the debris into a separate ball, forming the Moon.
Explanation:
Ahmed is trying to write a focused scientific question. "He writes, "Are the tides changing because of the Moon?" How could Ahmed's question best be rewritten
"Is the Moon's gravitational force affecting the tides on Earth?"
Is it possible for a diprotic acid to have Ka1?
Answer:
Yes, it is possible.
Explanation:
A diprotic acid is an acid that can release two protons. That's why it is called diprotic.
Monoprotic → Release one proton, for example Formic acid HCOOH
Triprotic → Releases three protons, for example H₃PO₄
Polyprotic → Release many protons, for example EDTA
it is a weak acid.
In the first equilibrum, it release proton, and the second is released in the second equilibrium. So the first equilibrium will have a Ka1
H₂A + H₂O ⇄ H₃O⁺ + HA⁻ Ka₁
HA⁻ + H₂O ⇄ H₃O⁺ + A⁻² Ka₂
The HA⁻ will work as an amphoterous because, it can be a base or an acid, according to this:
HA⁻ + H₂O ⇄ H₃O⁺ + A⁻² Ka₂
HA⁻ + H₂O ⇄ OH⁻ + H₂A Kb₂
Students observed cells under the microscope. They observed that the cells had a cell wall, cell membrane,
nucleus, and many chloroplasts.
Which observation helps students identify the type of cell observed?
A The presence of a nucleus means the cells are from a plant.
B The presence of a cell membrane means that the cells are from an animal.
C The presence of chloroplasts means that the cells are from a plant.
D The presence of a cell wall means that the cells are from an animal.
Answer:
option B is the right answer
The chemical 2,4-D causes liver decay in birds. True False
Answer:
no it cant
Explanation: