5) The human ear is made up of various chambers that have fixed amounts of fluid in them as well as air in those chambers that change the amount of fluid in the chambers. The middle ear has a volume of roughly 5.4cm when at a pressure of 1.0 x 105 N/m². a) Determine the volume of that same air when the air pressure is 0.83 x 105 N/m?, consistent with an elevation of 1500m above sea level (assume that remains constant). If the middle ear has no change in volume this means then that the air will somehow have to escape the chamber as well during this change in pressure due to the elevation. It turns out that this phenomena is what causes our ears to 'pop'.

The heat loss by metal and heat gained by water with the given information the heat gained by the metal is -16720 J.

We can use the following calculation to determine the heat loss by the metal and the heat gained by the water:

Q = m * c * ΔT

Here, it is given:

m1 = 50 g

T1 = 100 °C

c1 = 0.45 J/g°C

m2 = 50 g

T2 = 20 °C

c2 = 4.18 J/g°C

Now, the heat loss:

ΔT1 = T1 - T2

ΔT1 = 100 °C - 20 °C = 80 °C

Q1 = m1 * c1 * ΔT1

Q1 = 50 g * 0.45 J/g°C * 80 °C

Now, heat gain,

ΔT2 = T2 - T1

ΔT2 = 20 °C - 100 °C = -80 °C

Q2 = m2 * c2 * ΔT2

Q2 = 50 g * 4.18 J/g°C * (-80 °C)

Q1 = 50 g * 0.45 J/g°C * 80 °C

Q1 = 1800 J

Q2 = 50 g * 4.18 J/g°C * (-80 °C)

Q2 = -16720 J

Thus, as Q2 has a negative value, the water is losing heat.

For more details regarding heat gain, visit:

https://brainly.com/question/29698863

#SPJ4

Summary:

A stone of mass m is connected to a string of length l. The relationship between the mass and length of the string affects the dynamics of the system. By considering the forces acting on the stone, we can analyze its motion.

Explanation:

When a stone of mass m is connected to a string of length l, the motion of the system depends on several factors. One crucial aspect is the tension in the string. As the stone moves, the string exerts a force on it, known as tension. This tension force is directed towards the center of the stone's circular path.

The stone's mass influences the tension in the string. If the stone's mass increases, the tension required to keep it moving in a circular path also increases. This can be understood by considering Newton's second law, which states that the force acting on an object is equal to the product of its mass and acceleration. In this case, the force is provided by the tension in the string and is directed towards the center of the circular path. Therefore, a larger mass requires a larger force, and thus a greater tension in the string.

Additionally, the length of the string also plays a role in the stone's motion. A longer string allows the stone to cover a larger circular path. As a result, the stone will take more time to complete one revolution. This relationship can be understood by considering the concept of angular velocity. Angular velocity is defined as the rate of change of angle with respect to time. For a given angular velocity, a longer string will correspond to a larger path length, requiring more time to complete a full revolution.

In conclusion, the mass and length of the string are significant factors that influence the dynamics of a stone connected to a string. The mass affects the tension in the string, while the length determines the time taken to complete a revolution. Understanding these relationships allows us to analyze and predict the motion of the system.

Learn more about Acceleration here

brainly.com/question/15295474

#SPJ11

The volume flow rate in m is 8.89 × 10⁻⁵ m³/s.

Volume flow rate = volume of water/time taken

The volume of water that flows through the hose is equal to the volume of water that fills the container.

Therefore, Volume of water = 4.0 L = 4.0 × 10⁻³ m³

Time taken = 45 s

Using the above formula,

Volume flow rate = volume of water/time taken

                             = 4.0 × 10⁻³ m³/45 s

                             = 0.0889 × 10⁻³ m³/s

                             = 8.89 × 10⁻⁵ m³/s

Therefore, the volume flow rate in m is 8.89 × 10⁻⁵ m³/s.

Learn more about the volume flow rate:

brainly.com/question/23127034

#SPJ11

The phase angle in a series R L C circuit at resonance is 0 (option c).

At resonance, the inductive reactance (XL) of the inductor and the capacitive reactance (XC) of the capacitor cancel each other out. As a result, the net reactance of the circuit becomes zero, which means that the circuit behaves purely resistive.

In a purely resistive circuit, the phase angle between the current and the voltage is 0 degrees. This means that the current and the voltage are in phase with each other. They reach their maximum and minimum values at the same time.

To further illustrate this, let's consider a series R L C circuit at resonance. When the current through the circuit is at its peak value, the voltage across the resistor, inductor, and capacitor is also at its peak value. Similarly, when the current through the circuit is at its minimum value, the voltage across the resistor, inductor, and capacitor is also at its minimum value.

Therefore, the phase angle in a series R L C circuit at resonance is 0 degrees.

Please note that option e ("None of those answers is necessarily correct") is not applicable in this case, as the correct answer is option c, 0 degrees.

To know more about circuit visit:

https://brainly.com/question/12608516

#SPJ11

The number of moles of oxygen gas in the container is determined by the ideal gas law, using the given volume, temperature, and pressure 0.993 moles.

To determine the number of moles of oxygen gas in the container, we can use the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

First, let's convert the given temperature from Fahrenheit to Kelvin:

T(K) = (T(°F) + 459.67) × (5/9)

T(K) = (17.84 + 459.67) × (5/9)

T(K) ≈ 259.46 K

Next, we convert the given pressure from kilopascals (kPa) to pascals (Pa):

P(Pa) = P(kPa) × 1000

P(Pa) = 16.63 kPa × 1000

P(Pa) = 16630 Pa

Now, we can rearrange the ideal gas law equation to solve for n (number of moles):

n = PV / RT

Substituting the known values:

n = (16630 Pa) × (2.90 m³) / ((8.314 J/(mol·K)) × (259.46 K))

Simplifying the equation:

n ≈ 0.993 moles

Therefore, the number of moles of oxygen gas in the container is approximately 0.993 moles.

To learn more about moles click here:

brainly.com/question/15209553

#SPJ11

The resistance of the gold wire is 0.235 Ω.

Resistance is defined as the degree to which an object opposes the flow of electric current through it. It is measured in ohms (Ω). Resistance is determined by the ratio of voltage to current. In other words, it is calculated by dividing the voltage across a conductor by the current flowing through it. Ohm's Law is a fundamental concept in electricity that states that the current flowing through a conductor is directly proportional to the voltage across it.

A gold wire with a length of 5.69 cm and a diameter of 0.870 mm is carrying a current of 1.35 A. We need to calculate the resistance of this wire. To do this, we can use the formula for the resistance of a wire:

R = ρ * L / A

In the given context, R represents the resistance of the wire, ρ denotes the resistivity of the material (in this case, gold), L represents the length of the wire, and A denotes the cross-sectional area of the wire. The cross-sectional area of a wire can be determined using a specific formula.

A = π * r²

where r is the radius of the wire, which is half of the diameter given. We can substitute the values given into these formulas:

r = 0.870 / 2 = 0.435 mm = 4.35 × 10⁻⁴ m A = π * (4.35 × 10⁻⁴)² = 5.92 × 10⁻⁷ m² ρ for gold is 2.44 × 10⁻⁸ Ωm L = 5.69 cm = 5.69 × 10⁻² m

Now we can substitute these values into the formula for resistance:R = (2.44 × 10⁻⁸ Ωm) * (5.69 × 10⁻² m) / (5.92 × 10⁻⁷ m²) = 0.235 Ω

Therefore, the resistance of the gold wire is 0.235 Ω.

Learn more about resistance at: https://brainly.com/question/17563681

#SPJ11

The force required to stop the train is 2.93 × 10⁶ N (to two significant figures).

Given that Superman must stop a 190-km/h train in 200 m to keep it from hitting a stalled car on the tracks. The train's mass is 3.7 × 10⁵ kg.

To calculate the force, we use the formula:

F = ma

Where F is the force required to stop the train, m is the mass of the train, and a is the acceleration of the train.

So, first, we need to calculate the acceleration of the train. To calculate acceleration, we use the formula:

v² = u² + 2as

Where v is the final velocity, u is the initial velocity, a is the acceleration, and s is the distance traveled.

The initial velocity of the train is 190 km/h = 52.8 m/s (since 1 km/h = 1000 m/3600 s)

The final velocity of the train is 0 m/s (since Superman stops the train)

The distance traveled by the train is 200 m.

So, v² = u² + 2as ⇒ (0)² = (52.8)² + 2a(200) ⇒ a = -7.92 m/s² (the negative sign indicates that the train is decelerating)

Now, we can calculate the force:

F = ma = 3.7 × 10⁵ kg × 7.92 m/s² = 2.93 × 10⁶ N

Therefore, the force required to stop the train is 2.93 × 10⁶ N (to two significant figures).

Learn more about force visit:

brainly.com/question/30507236

#SPJ11

In this scenario, a lens with a focal length of 20 mm is used to form an image of an object located 50 mm away from the lens along its optic axis. The object has a height of 10 mm. By applying the thin lens formula and magnification formula, we can calculate the location and size of the image formed. The image is inverted and located 100 mm away from the lens, with a height of -5 mm.

To determine the location and size of the image formed by the lens, we can use the thin lens formula:

1/f = 1/v - 1/u,

where f represents the focal length of the lens, v is the image distance from the lens, and u is the object distance from the lens. Plugging in the values, we have:

1/20 = 1/v - 1/50.

Solving this equation gives us v = 100 mm. The positive value indicates that the image is formed on the opposite side of the lens (real image).

Next, we can calculate the size of the image using the magnification formula:

m = -v/u,

where m represents the magnification. Plugging in the values, we get:

m = -100/50 = -2.

The negative sign indicates an inverted image. The magnification value of -2 tells us that the image is two times smaller than the object.

Finally, to calculate the height of the image, we multiply the magnification by the object height:

h_image = m * h_object = -2 * 10 mm = -20 mm.

The negative sign indicates that the image is inverted, and the height of the image is 20 mm.

Therefore, the image formed by the lens is inverted, located 100 mm away from the lens, and has a height of -20 mm.

Learn more about height here :

brainly.com/question/29131380

#SPJ11

The energy gap between the 1st and 2nd excited states is 1.602 x 10^(-19) J.

To calculate the energy gap between the 1st and 2nd excited states, we need to use the concept of energy levels in quantum mechanics. The energy gap between consecutive energy levels is given by the formula:

ΔE = E_n - E_m

Where ΔE is the energy gap, E_n is the energy of the nth level, and E_m is the energy of the mth level.

Given that the energy gap between the 2nd and 3rd excited states is 1 eV, we can convert it to joules using the conversion factor 1 eV = 1.602 x 10^(-19) J.

Therefore, the energy gap between the 2nd and 3rd excited states is:

ΔE = 1 eV = 1.602 x 10^(-19) J.

Since the energy levels in the system are evenly spaced, the energy gap between the 1st and 2nd excited states will be the same as the gap between the 2nd and 3rd excited states.

Therefore, the energy gap between the 1st and 2nd excited states is also:

ΔE = 1.602 x 10^(-19) J.

learn more about "energy ":- https://brainly.com/question/13881533

#SPJ11

The actual frequency of the ambulance's siren is approximately 481.87 Hz.

To determine the actual frequency of the ambulance's siren, we need to consider the Doppler effect. The Doppler effect describes the change in frequency of a wave when the source of the wave and the observer are in relative motion.

In this case, you are driving towards the ambulance, so you are the observer. The ambulance's siren is the source of the sound waves. When the source and the observer are moving toward each other, the observed frequency is higher than the actual frequency.

We can use the Doppler effect formula for sound to calculate the actual frequency:

f' = (v + vo) / (v + vs) * f

Where:

f' is the observed frequency

f is the actual frequency

v is the speed of sound

vo is the velocity of the observer

vs is the velocity of the source

Given that you are driving at a velocity of 37 m/s towards the ambulance, the ambulance is traveling at a velocity of 44 m/s towards you, and the observed frequency is 426 Hz, we can substitute these values into the formula:

426 = (v + 37) / (v - 44) * f

To solve for f, we need the speed of sound (v). Assuming the speed of sound is approximately 343 m/s, which is the speed of sound in dry air at room temperature, we can solve the equation for f:

426 = (343 + 37) / (343 - 44) * f

Simplifying the equation, we get:

426 = 380 / 299 * f

f ≈ 481.87 Hz

To learn more about frequency

https://brainly.com/question/254161

#SPJ11

The magnetic field at the center of a square loop carrying current can be calculated using the formula B = (μ₀ * I) / (2 * r). The magnitude of the magnetic field at the center of the loop is 3.16 μT (microtesla).

The formula to calculate the magnetic field at the center of a square loop is B = (μ₀ * I) / (2 * r). The permeability of free space, μ₀, is a constant value equal to 4π × 10^(-7) T·m/A. The current, I, is given as 0.300 A.

To determine the distance, r, from the center of the loop to the wire, we can use the fact that the center of a square is equidistant from all its sides. In this case, the distance from the center to any side of the square is half the length of the side, which is L/2. Given that L = 10.8 cm, we have r = 5.4 cm.    

Now we can substitute the values into the formula to calculate the magnetic field at the center: B = (4π × 10^(-7) T·m/A * 0.300 A) / (2 * 5.4 cm). Simplifying the equation, we get B ≈ 3.16 μT. Therefore, the magnitude of the magnetic field at the center of the loop is approximately 3.16 μT (microtesla).

To learn more about magnetic field click here : brainly.com/question/3160109

#SPJ11

The distance Δx between the points where the ions strike the detector is 0.0971 meters. In a mass spectrometer, ions are accelerated by a potential difference and then move in a circular path due to the presence of a magnetic field.

To solve this problem, we can use the equation for the radius of the circular path:

r = (m*v) / (|q| * B)

where m is the mass of the ion, v is its velocity, |q| is the magnitude of the charge, and B is the magnetic field strength. Since the ions are accelerated from rest, we can use the equation for the kinetic energy to find their velocity:

KE = q * V

where KE is the kinetic energy, q is the charge, and V is the potential difference.

Once we have the radius, we can calculate the distance Δx between the two points where the ions strike the detector. Since the ions follow circular paths with the same radius, the distance between the two points is equal to the circumference of the circle, which is given by:

Δx = 2 * π * r

By substituting the given values into the equations and performing the calculations, we find that Δx is approximately 0.0971 meters.

To learn more about distance click here brainly.com/question/31713805

#SPJ11

The coefficient of friction between the car and the track is approximately -0.158. To determine the coefficient of friction between the roller coaster car and the track, we need to consider the forces acting on the car and apply the principles of Newtonian mechanics.

Distance down the track (d) = 20 m

Velocity of the car (v) = 3 m/s

Angle of the hill (θ) = 9°

First, let's calculate the acceleration of the car using the kinematic equation:

v^2 = u^2 + 2ad

where:

v is the final velocity (3 m/s),

u is the initial velocity (0 m/s, as the car is at rest),

a is the acceleration, and

d is the distance (20 m).

Solving for a:

a = (v^2 - u^2) / (2d)

= (3^2 - 0) / (2 * 20)

= 0.225 m/s^2

The force acting on the car down the hill is the component of the gravitational force parallel to the incline. It can be calculated using:

F = m * g * sin(θ)

where:

m is the mass of the car, and

g is the acceleration due to gravity (approximately 9.8 m/s^2).

Now, we can calculate the normal force (N) acting on the car perpendicular to the incline. It is equal to the weight of the car, given by:

N = m * g * cos(θ)

The frictional force (f) between the car and the track opposes the motion and is given by:

f = μ * N

where:

μ is the coefficient of friction.

Since the car is accelerating down the track, the frictional force is directed opposite to the motion and can be written as:

f = -μ * N

Now, equating the frictional force to the force down the hill:

-μ * N = m * g * sin(θ)

Substituting the expressions for N and f:

-μ * (m * g * cos(θ)) = m * g * sin(θ)

Canceling out the mass and acceleration due to gravity:

-μ * cos(θ) = sin(θ)

Simplifying:

μ = -tan(θ)

Substituting the value of θ (9°):

μ = -tan(9°)

Calculating:

μ ≈ -0.158

The negative sign indicates that the coefficient of friction is acting in the direction opposite to the motion of the car. Therefore, the coefficient of friction between the car and the track is approximately -0.158.

Learn more about friction here:

https://brainly.com/question/13000653

#SPJ11

The average force on the ball would be 2.0 times greater. When a ball hits a wall head on and sticks to it, the change in velocity is equal to the original velocity of the ball. In this case, the change in velocity is 2 times the original velocity.

If the ball bounces off the wall with one-half of the original velocity, the change in velocity would be half of the original velocity. Therefore, the change in velocity is now 0.5 times the original velocity. Since the collision lasts the same time in both scenarios, we can compare the average force using the formula: force = mass × change in velocity / time.
In the first scenario, the average force would be F₁ = m × (2v) / t.
In the second scenario, the average force would be F₂ = m × (0.5v) / t.
Dividing F₂ by F₁, we get F₂ / F₁ = (m × 0.5v / t) / (m × 2v / t).
The mass (m) and time (t) cancel out, leaving us with F₂ / F₁ = (0.5v) / (2v)

= 0.25.
Therefore, the average force on the ball in the second scenario is 0.25 times the average force in the first scenario.
Since we are comparing the average force, we can take the reciprocal to find the ratio: 1 / 0.25 = 4.
Thus, the average force on the ball would be 4 times greater in the second scenario, which is equivalent to 2.0 times greater.When a ball hits a wall head on and sticks to it, the change in velocity is equal to the original velocity of the ball. In this case, the change in velocity is 2 times the original velocity.

Since we are comparing the average force, we can take the reciprocal to find the ratio: 1 / 0.25 = 4.

Thus, the average force on the ball would be 4 times greater in the second scenario, which is equivalent to 2.0 times greater.

To know more about velocity visit:

https://brainly.com/question/30559316

#SPJ11

Answer:  the density of the liquid is approximately 2499.2 kg/m³

Explanation:

To find the density of the liquid, we can use Archimedes' principle, which states that the buoyant force experienced by an object submerged in a fluid is equal to the weight of the fluid displaced by the object.

The weight of the body in air is given as 98 N, and the weight of the body submerged in the liquid is given as 66.64 N. The difference in weight between the two states represents the weight of the liquid displaced by the body.

Weight of the liquid displaced = Weight in air - Weight submerged = 98 N - 66.64 N = 31.36 N

Now, we can use the formula for density:

Density = (Weight of the liquid displaced) / (Volume of the liquid displaced)

Since the weight of the liquid displaced is 31.36 N and the density of the body is given as 2500 kg/m³, we can rearrange the formula to solve for the volume of the liquid displaced:

Volume of the liquid displaced = (Weight of the liquid displaced) / (Density of the body)

Volume of the liquid displaced = 31.36 N / 2500 kg/m³ = 0.012544 m³

Now, we can find the density of the liquid:

Density of the liquid = (Weight of the liquid displaced) / (Volume of the liquid displaced)

Density of the liquid = 31.36 N / 0.012544 m³ ≈ 2499.2 kg/m³

Resistance (R) = 12.87 Ω

Inductance (L) = 35 mH (or 0.000035 H)

a. Phasor diagram of the circuit is given below:b. The two circuit elements are connected are inductance (L) and resistance (R).

In a purely inductive circuit, voltage and current are out of phase with each other by 90°. In a purely resistive circuit, voltage and current are in phase with each other. Hence, by comparing the phase difference between voltage and current, we can determine that the circuit contains inductance (L) and resistance (R).

c. We know that;

Maximum voltage (V) = 175 VMaximum current (I) = 13.6

APhase angle (θ) = 37°

We can find out the Impedance (Z) of the circuit by using the below relation;

Impedance (Z) = V / IZ = 175 / 13.6Z = 12.868 Ω

Now, we can find out the values of resistance (R) and inductance (L) using the below relations;

Z = R + XL

Here, XL = 2πfL

Where f = 90 Hz

Therefore,

XL = 2π × 90 × LXL = 565.49 LΩ

Z = R + XL12.868 Ω = R + 565.49 LΩ

Maximum current (I) = 13.6 A,

so we can calculate the maximum value of R and L using the below relations;

V = IZ175 = 13.6 × R

Max R = 175 / 13.6

Max R = 12.87 Ω

We can calculate L by substituting the value of R

Max L = (12.868 − 12.87) / 565.49

Max L = 0.000035 H = 35 mH

Therefore, the two circuit elements are;

Resistance (R) = 12.87 Ω

Inductance (L) = 35 mH (or 0.000035 H)

learn more about Resistance on:

https://brainly.com/question/28135236

#SPJ11

a) When a bar magnet is broken into two pieces, the two pieces become two independent magnets, and not a north-pole magnet and a south-pole magnet. This is because each piece contains its own magnetic domain, which is a region where the atoms are aligned in the same direction. The alignment of atoms in a magnetic domain creates a magnetic field. In a magnet, all the magnetic domains are aligned in the same direction, creating a strong magnetic field.

When a magnet is broken into two pieces, each piece still has its own set of magnetic domains and thus becomes a magnet itself. The new north and south poles of the pieces will depend on the arrangement of the magnetic domains in each piece.

b) When a magnet is heated up, the heat energy causes the atoms in the magnet to vibrate more, which can disrupt the alignment of the magnetic domains. This causes the magnetization power to decrease. However, when the temperature cools back down, the atoms in the magnet stop vibrating as much, and the magnetic domains can re-align, causing the magnetism power to return. This effect is assuming that the temperature is lower than the Curie point, which is the temperature at which a material loses its magnetization permanently.

Learn more about magnetism here: https://brainly.com/question/14411049

#SPJ11

The resistance of the metal resistor would be 10.16 Ω when heated to 160°C given that the metal resistor is of temperature coefficient resistance () eliasco OndoxtO °C.

Given that resistance at 0°C is 10Ω. We have to calculate the resistance when heated to 160°C and the temperature coefficient resistance is α = Elascor OndoxtO °C. Let the final resistance be R. Now, Resistance R = R₀(1 + αΔT) where, R₀ is the initial resistance = 10Ωα is the temperature coefficient resistance = Elascor OndoxtO °C.

ΔT is the change in temperature = T₂ - T₁ = 160°C - 0°C = 160°C

So, R = R₀(1 + αΔT) = 10(1 + Elascor OndoxtO °C × 160°C) = 10 (1 + 0.016) = 10.16 Ω

Therefore, when heated to 160°C, the resistance of the metal resistor would be 10.16 Ω.

More on resistance: https://brainly.com/question/17137548

#SPJ11

The type of flow can be determined using the Reynolds number, which is a dimensionless quantity that characterizes the flow regime. The Reynolds number equation is significant because it helps us understand the nature of fluid flow.

a) The type of flow can be determined using the Reynolds number.

b) The Reynolds number is a dimensionless quantity that helps in identifying the nature of flow, whether it is laminar or turbulent. It is calculated by comparing the inertial forces to the viscous forces within the fluid. For pipe flow, the Reynolds number can indicate the transition from smooth, orderly flow (laminar) to chaotic, irregular flow (turbulent). This information is crucial in designing and selecting appropriate pipe sizes, considering factors such as pressure drop, energy losses, and efficiency of fluid transportation.

c) To determine the rated power of the pump needed, several factors need to be considered, including the flow rate, elevation difference, pipe length, minor loss coefficient, efficiency of the pump, and viscosity of the fluid. By applying the principles of fluid mechanics, the power requirement can be calculated using the Bernoulli equation and considering the head losses due to pipe friction and minor losses. The power requirement will depend on the desired flow rate and the specific characteristics of the system.

To learn more about fluid flow, click here: https://brainly.com/question/14747327

#SPJ11

The intensity level from the lawnmower, at a distance of 20 answer: m, is approximately 0.000012 dB.

When we move 20 m away from the lawnmower, we need to calculate the new intensity level at this position. Intensity level is measured in decibels (dB) and can be calculated using the formula:

IL = 10 * log10(I/I0),

where I is the intensity and I0 is the reference intensity (typically 10^(-12) W/m^2).

We can use the inverse square law for sound propagation, which states that the intensity of sound decreases with the square of the distance from the source. The new intensity (I2) can be calculated as follows:

I2 = I1 * (r1^2/r2^2),

where I1 is the initial intensity, r1 is the initial distance, and r2 is the new distance.

In this case, the initial intensity (I1) is 0.005 W/m^2 (given), the initial distance (r1) is 3 m (given), and the new distance (r2) is 20 m (given). Plugging these values into the formula, we get:

I2 = 0.005 * (3^2/20^2)

   = 0.0001125 W/m^2.

Convert the new intensity to dB:

Now that we have the new intensity (I2), we can calculate the intensity level (IL) in decibels using the formula mentioned earlier:

IL = 10 * log10(I2/I0).

Since the reference intensity (I0) is 10^(-12) W/m^2, we can substitute the values and calculate the intensity level:

IL = 10 * log10(0.0001125 / 10^(-12))

  ≈ 0.000012 dB.

Therefore, the intensity level from the lawnmower, at a distance of 20 m, is approximately 0.000012 dB. This value represents a significant decrease in intensity compared to the initial distance of 3 m. It indicates that the sound from the lawnmower becomes much quieter as you move farther away from it.

Learn more about Intensity

brainly.com/question/17583145

#SPJ11

Re₂ = (ρ * v₂ * d₂) / μ, we need additional information about the fluid density (ρ) and velocity (v₂) to calculate the Reynolds number for the nozzle.To calculate the Reynolds number for flow in the hose and nozzle, we use the formula:

Re = (ρ * v * d) / μ

where Re is the Reynolds number, ρ is the density of the fluid, v is the velocity of the fluid, d is the diameter of the pipe (twice the radius), and μ is the viscosity of the fluid.


Hose radius (r₁) = 0.750 cm = 0.00750 m
Nozzle radius (r₂) = 0.410 cm = 0.00410 m
Flow rate (Q) = 0.340 L/s = 0.000340 m³/s
Viscosity of water (μ) = 1.005 x 10⁻³ N/m²s

(a) For flow in the hose:
Diameter (d₁) = 2 * r₁ = 2 * 0.00750 m = 0.015 m

Using the formula, Re₁ = (ρ * v₁ * d₁) / μ, we need additional information about the fluid density (ρ) and velocity (v₁) to calculate the Reynolds number for the hose.

(b) For flow in the nozzle:
Diameter (d₂) = 2 * r₂ = 2 * 0.00410 m = 0.00820 m

Using the formula, Re₂ = (ρ * v₂ * d₂) / μ, we need additional information about the fluid density (ρ) and velocity (v₂) to calculate the Reynolds number for the nozzle.

 To  learn  more  about radius click on:brainly.com/question/24051825

#SPJ11

The magnification is given by: M = v2/v1 = (54 cm)/(60 cm) = 0.9

This means that the image is smaller than the object, by a factor of 0.9.

A. Diagram B. Using the lens formula:

1/f = 1/v - 1/u

For the first lens, with u = -15 cm, f = +12 cm, and v1 is unknown.

Thus,1/12 = 1/v1 + 1/15v1 = 60 cm

For the second lens, with u = 360 cm - 60 cm = +300 cm, f = +18 cm, and v2 is unknown.

Thus,1/18 = 1/v2 - 1/300v2 = 54 cm

Thus, the image is formed at a distance of 54 cm to the right of the second lens, measured from its center, which makes it 54 - 18 = 36 cm to the right of the second lens measured from its right-hand side.

The image is real, as it appears on the opposite side of the lens from the object. It is inverted, since the object is located between the two lenses.

To know more about magnification  visit:-

https://brainly.com/question/2648016

#SPJ11

This is a dictionary of physical terms and formulas related to electricity, including definitions and problem-solving examples on electric current, voltage, and resistance. The resistance of the 2nd resistor is 54 [tex]\Omega[/tex], the total resistance of the circuit is 25 [tex]\Omega[/tex] and the current strength is 1.5 A, and the work is 198000 J

For more questions on electric current

https://brainly.com/question/1100341

#SPJ8

1) a) Erot = 0.036 J, b) Vmax = 0.095 m/s, c) x when v = 10.0 m/s:

2) The net electrostatic force experienced is 1.08 x 10⁻¹⁴ N to the left.

a) Erot (the total mechanical energy in the system) The total mechanical energy in a spring-mass system that consists of a 4.00 kg mass on a frictionless surface attached to a spring with a spring constant of 1.60x10° N/m is:

Erot = (1/2)kA²where k is the spring constant and A is the amplitude of the oscillation

Therefore, Erot = (1/2)(1.60 × 10°)(0.150²)J = 0.036 J

b) Vmax

The maximum speed, Vmax can be calculated as follows: Vmax = Aω, where ω is the angular frequency of oscillation.

ω = (k/m)¹/²= [(1.60x10⁰)/4.00]¹/²= 0.632 rad/s

Therefore,Vmax = Aω= 0.150 m x 0.632 rad/s= 0.095 m/s

c) x when v = 10.0 m/s

The speed of the mass is given by the expression: v = ±Aω cos(ωt)Let t = 0, v = Vmax = 0.095 m/s

Let x be the displacement of the mass at this instant.

x = A cos(ωt) = A = 0.150 m

We can find t using the equation: v = -Aω sin(ωt)t = asin(v/(-Aω)), where a is the amplitude of the oscillation and is positive since A is positive; and the negative sign is because v and Aω are out of phase.

The time is, therefore,t = asin(v/(-Aω)) = asin(10.0/(-0.150 x 0.632))= asin(-106.05)

Note that the value of sin θ cannot exceed ±1. Therefore, the argument of the inverse sine function must be between -1 and 1. Since the argument is outside this range, it is impossible to find a time at which the mass will have a speed of 10.0 m/s.

Therefore, no real solution exists for x.

2) When a proton is positioned at the point, P, in the figure above, the net electrostatic force it experiences can be calculated using the equation: F = k(q₁q₂/r²)where F is the electrostatic force, k is Coulomb's constant, q₁ and q₂ are the charges on the two particles, and r is the distance between them.

The proton is positioned to the right of the -3.00 µC charge and to the left of the +1.00 µC charge. The electrostatic force exerted on the proton by the -3.00 µC charge is to the left, while the electrostatic force exerted on it by the +1.00 µC charge is to the right. Since the net force is the vector sum of these two forces, it is the difference between them.

Fnet = Fright - Fleft= k(q₁q₂/r₂ - q₁q₂/r₁), where r₂ is the distance between the proton and the +1.00 µC charge, and r₁ is the distance between the proton and the -3.00 µC charge, r₂ = 0.040 m - 0.020 m = 0.020 mr₁ = 0.060 m + 0.020 m = 0.080 m

Substituting the given values and evaluating,

Fnet = (8.99 x 10⁹ N.m²/C²)(1.60 x 10⁻¹⁹ C)(3.00 x 10⁻⁶ C/0.020 m²) - (8.99 x 10⁹ N.m²/C²)(1.60 x 10⁻¹⁹ C)(1.00 x 10⁻⁶ C/0.080 m²)

Fnet = 1.08 x 10^-14 N to the left.

Answer:

a) Erot = 0.036 J, Vmax = 0.095 m/s, c) x when v = 10.0 m/s: No real solution exists for x.

2) The net electrostatic force experienced by the proton when it is positioned at point P in the figure above is 1.08 x 10^-14 N to the left.

To learn about electrostatic force here:

https://brainly.com/question/30534697

#SPJ11

The given statement, "Destructive interference of two superimposed waves requires the waves to travel in opposite directions" is false because destructive interference of two superimposed waves requires the waves to be traveling in the same direction and having a phase difference of π or an odd multiple of π.

In destructive interference, the two waves will have a phase difference of either an odd multiple of π or an odd multiple of 180 degrees. When the phase difference is an odd multiple of π, it results in a complete cancellation of the two waves in the region where they are superimposed and the resultant wave has zero amplitude. In constructive interference, the two waves will have a phase difference of either an even multiple of π or an even multiple of 180 degrees. When the phase difference is an even multiple of π, it results in a reinforcement of the two waves in the region where they are superimposed and the resultant wave has maximum amplitude.

Learn more about Destructive interference at https://brainly.com/question/23594941

#SPJ11

The value of the shunt resistance Rs is calculated to be approximately (1.02 Ω).To convert a galvanometer into an ammeter with a maximum reading value of 500 mA, a shunt resistance (Rs) needs to be added.

The value of the shunt resistance can be calculated using the formula Rs = (RG * IMax) / (IMax - Max), where RG is the internal resistance of the galvanometer, IMax is the maximum deflection current of the galvanometer (15 mA), and Max is the desired maximum current reading of the ammeter (500 mA).

To convert a galvanometer into an ammeter, a shunt resistance is connected in parallel with the galvanometer.

The shunt resistance diverts a portion of the current, allowing the remaining current to flow through the galvanometer.

By choosing an appropriate value for the shunt resistance, the ammeter can be calibrated to measure higher currents.

In this case, the shunt resistance value (Rs) can be determined using the formula Rs = (RG * IMax) / (IMax - Max), where RG is the internal resistance of the galvanometer, IMax is the maximum deflection current of the galvanometer (15 mA), and Max is the desired maximum current reading of the ammeter (500 mA).

Substituting the given values,

we have Rs = (RG * 15 mA) / (15 mA - 500 mA). Simplifying further, Rs = (RG * 15 mA) / (-485 mA).

Rearranging the equation,

we get Rs = - RG * (15 mA / 485 mA). Since RG is given as (RG-59), we substitute it into the equation to obtain Rs = - (RG-59) * (15 mA / 485 mA).

The result of this calculation gives us the value of the shunt resistance Rs, which is approximately 1.02 Ω. Therefore, a shunt resistance of approximately 1.02 Ω should be added in parallel with the galvanometer to convert it into an ammeter with a maximum reading value of 500 mA.

Learn more about shunt resisitance from the given link:

https://brainly.com/question/31811502

#SPJ11

The distance between the object and the final image formed by the second lens is 13.08 cm and the overall magnification is -0.681.

To find the distance between the object and the final image formed by the second lens, we can use the lens formula:

1/f = 1/v - 1/u

where f is the focal length, v is the image distance, and u is the object distance.

For the first lens with a focal length of +8.5 cm, the object distance (u) is -18.8 cm (negative since it is to the left of the lens). Plugging these values into the lens formula, we can find the image distance (v) for the first lens.

1/8.5 = 1/v - 1/(-18.8)

v = -11.3 cm

Now, for the second lens with a focal length of -30 cm, the object distance (u) is +5.73 cm (positive since it is to the right of the lens). Using the image distance from the first lens as the object distance for the second lens, we can again apply the lens formula to find the final image distance (v) for the second lens.

1/-30 = 1/v - 1/(-11.3 + 5.73)

v = 13.08 cm

Therefore, the distance between the object and the final image formed by the second lens is 13.08 cm.

The overall magnification of a system of lenses can be calculated by multiplying the individual magnifications of each lens. The magnification of a single lens is given by:

m = -v/u

where m is the magnification, v is the image distance, and u is the object distance.

For the first lens, the magnification (m1) is -(-11.3 cm)/(-18.8 cm) = 0.601.

For the second lens, the magnification (m2) is 13.08 cm/(5.73 cm) = 2.284.

To find the overall magnification, we multiply the individual magnifications:

Overall magnification = m1 * m2 = 0.601 * 2.284 = -1.373

Therefore, the overall magnification is -0.681, indicating a reduction in size.

To learn more about magnification , click here : https://brainly.com/question/2648016

#SPJ11

An isotope of Sodium undergoing β decay by emitting a positron (positively charged electron) will transform into a different element. Specifically, it will become an isotope of Magnesium.

β decay involves the transformation of a neutron into a proton within the nucleus of an atom. In this process, a high-energy electron, called a beta particle (β-), is emitted when a neutron is converted into a proton. However, in the case of β+ decay, a proton within the nucleus is converted into a neutron, and a positron (β+) is emitted.

Since the isotope of Sodium undergoes β decay by emitting a positron, one of its protons is converted into a neutron. This transformation changes the atomic number of the nucleus, and the resulting element will have one fewer proton. Sodium (Na) has an atomic number of 11, while Magnesium (Mg) has an atomic number of 12. Therefore, the isotope of Sodium, after β+ decay, becomes an isotope of Magnesium.

learn more about "electron":- https://brainly.com/question/860094

#SPJ11

The radius of Comet C is approximately 5.87 x 10^-6 meters, given its mass of 498 kg and gravitational acceleration of 31 m/s².

To calculate the radius of Comet C, we can use the formula for gravitational acceleration:

a = G * (m / r²),

where:

We can rearrange the formula to solve for r:

r² = G * (m / a).

Substituting the given values:

G = 6.67430 x 10^-11 m³/(kg·s²),

m = 498 kg, and

a = 31 m/s²,

we can calculate the radius:

r² = (6.67430 x 10^-11 m³/(kg·s²)) * (498 kg / 31 m/s²).

r² = 1.0684 x 10^-9 m⁴/(kg·s²) * kg/m².

r² = 3.4448 x 10^-11 m².

Taking the square root of both sides:

r ≈ √(3.4448 x 10^-11 m²).

r ≈ 5.87 x 10^-6 m.

Therefore, the radius of Comet C is approximately 5.87 x 10^-6 meters.

To learn more about gravitational acceleration, Visit:

https://brainly.com/question/14374981

#SPJ11

Superman must apply a horizontal force of approximately 3142.09 N to the boulder.

To find the horizontal force that Superman must apply to the boulder we can use Newton's second law of motion.

F = m × a

We need to find the force, and we know the weight of the boulder, which is equal to the force of gravity acting on it.

The weight (W) is given as 2700 N.

The weight of an object can be calculated using the formula:

W = m × g

Where g is the acceleration due to gravity.

g= 9.8 m/s².

Rearranging the formula, we can find the mass (m) of the boulder:

m = W / g

Substituting the given values:

m = 2700 N / 9.8 m/s²

= 275.51 kg

Now that we know the mass of the boulder, we can calculate the force (F) needed to give it a horizontal acceleration of 11.4 m/s²:

F = m × a

F = 275.51 kg× 11.4 m/s²

= 3142.09 N

To learn more on Force click:

https://brainly.com/question/13191643

#SPJ4