5. Movement of large particles, including large molecules or entire microorganisms, into a cell by engulfing extracellular materil, as the plasma membrane forms membrane- bound sacs that enter the cytoplasm (2 point).
Endocrine
Endocytosis
Endocarp

Answers

Answer 1

The process is called endocytosis. By absorbing extracellular material, cells endocytose big particles like molecules or bacteria. Vesicles, membrane-bound sacs, are produced from the plasma membrane and internalized into the cell's cytoplasm.

Nutrient absorption, receptor-mediated signaling, and immunological response depend on endocytosis. Endocytosis might be phagocytosis, pinocytosis, or receptor-mediated. Phagocytosis is the endocytosis of big particles like bacteria or cellular detritus. Macrophages and neutrophils remove pathogens and foreign substances using this technique.

Pinocytosis, or fluid-phase endocytosis, involves the non-specific uptake of extracellular fluids and solutes. This lets the cell absorb extracellular fluid and its contents. Receptor-mediated endocytosis is extremely selective and involves ligand binding to cell surface receptors. Hormones and growth factors are ligands. The cell internalizes the ligand-receptor complex after it forms clathrin-coated pits on the plasma membrane.

In summary, cells endocytose big extracellular particles or molecules. Phagocytosis, pinocytosis, and receptor-mediated endocytosis help with food uptake, cell signaling, and immunological response.

To know more about endocytosis

https://brainly.com/question/13462219

#SPJ11


Related Questions

Explain the sensory and motor mechanisms by which these
cranial nerve reflexes happen
Masseter reflex

Answers

The Masseter reflex is a cranial nerve reflex that involves sensory and motor mechanisms. It is initiated by stimulation of the masseter muscle and results in the contraction of the jaw muscles.

The sensory component involves the trigeminal nerve (cranial nerve V), which detects the stretch or tension in the masseter muscle. The motor component involves the mandibular branch of the trigeminal nerve, which sends signals to the muscles responsible for jaw closure, leading to the reflexive contraction.

The Masseter reflex is a monosynaptic reflex, meaning it involves a single synapse in the nervous system. When the masseter muscle is stretched or tensed, sensory receptors called muscle spindles within the muscle detect this change. The sensory information is then transmitted via the sensory fibers of the trigeminal nerve (V3 branch) to the brainstem.

In the brainstem, the sensory information is relayed to the motor neurons responsible for controlling the muscles involved in jaw closure. These motor neurons, located in the motor nucleus of the trigeminal nerve, receive the sensory input and generate motor signals. The motor signals travel back through the mandibular branch of the trigeminal nerve to the muscles of mastication, including the masseter muscle.

The motor signals cause the jaw muscles to contract, leading to the reflexive closure of the jaw. This reflex serves a protective function by automatically closing the jaw in response to sudden or excessive stretching of the masseter muscle. It helps maintain the stability and positioning of the jaw during activities such as chewing or biting.

Overall, the Masseter reflex involves sensory detection of muscle tension by the trigeminal nerve and subsequent motor activation of the jaw muscles to produce a reflexive jaw closure.

Learn more about jaw muscles here:

https://brainly.com/question/32220967

#SPJ11

What term is used to describe the process of the shedding of one or more limbs and what is the reason for this? Enter your answer here

Answers

The term used to describe the process of the shedding of one or more limbs is known as Autotomy. Autotomy is a phenomenon seen in animals and plants, in which a part or appendage of the body is voluntarily shed by the organism.

The reason for autotomy is to escape predation. Animals that have autotomy usually have weak regeneration abilities. These animals include arthropods (such as lobsters, spiders, and crabs), echinoderms (such as starfish and sea urchins), reptiles (such as geckos, salamanders, and lizards), and amphibians (such as salamanders).

The process of autotomy is a biological adaptation that helps animals to escape from predators, as well as to distract them by shedding a limb while they make their escape. Many animals that are subject to predation are able to perform autotomy. When an animal is being attacked, it can shed one or more of its limbs or appendages, which distracts the predator and allows the animal to escape.

To know more about limbs click here:

https://brainly.com/question/12993363

#SPJ11

d- Label the following organisms as prokaryotes or eukaryotes Organism Tiger Fungi Pseudomonas bacteria Algae E. Coli bacteria Mushroom Streptococcus bacteria Human e- Name 2 differences between bacteria and archaea. (1 for each) Bacteria: Archaea: Prokaryote or Eukaryote d- Label the following organisms as prokaryotes or eukaryotes Organism Tiger Fungi Pseudomonas bacteria Algae E. Coli bacteria Mushroom Streptococcus bacteria Human e- Name 2 differences between bacteria and archaea. (1 for each) Bacteria: Archaea: Prokaryote or Eukaryote

Answers

Labeling organisms as prokaryotes or eukaryotes:

Tiger - Eukaryote

Fungi - Eukaryote

Pseudomonas bacteria - Prokaryote

Algae - Eukaryote

E. Coli bacteria - Prokaryote

Mushroom - Eukaryote

Streptococcus bacteria - Prokaryote

Human - Eukaryote

2 differences between bacteria and archaea: One difference between bacteria and archaea is that bacterial cell walls are made of peptidoglycan, while archaeal cell walls lack peptidoglycan. Another difference is that bacteria tend to have a single circular chromosome, while archaea often have several linear chromosomes.

Learn more about prokaryotes from the given link:

https://brainly.com/question/29054000

#SPJ11

BIOSTATS AND epidemiology
For the year 2016, the cumulative incidence of a neurological disease is estimated to be 22 per 100,000 and its prevalence 88 per 100,000.
What is its average duration in years?
Please select one answer :
a.It is 5 years.
b.It cannot be calculated.
c.It is 4 years.
d.It is 0.25 years.
e.It is 10 years.

Answers

The average duration of the disease in years is 4 years. Thus, option a is correct.

The correct answer is option a. It is 5 years.

Cumulative incidence of a disease is defined as the number of new cases of the disease that occur over a specified time period. In contrast, prevalence refers to the number of individuals with the disease, both new and old cases, in a defined population during a specified time period.

Cumulative incidence = (Number of new cases during a time period / Total population at risk) * constant

Prevalence = (Number of cases during a time period / Total population) * constant

From the given information:

For the year 2016, the cumulative incidence of a neurological disease is estimated to be 22 per 100,000 and its prevalence 88 per 100,000.The duration of the disease can be calculated by using the formula:

Disease Duration = Prevalence / IncidenceDisease Duration = (88/100,000) / (22/100,000)

Disease Duration = 4

Therefore, the average duration of the disease in years is 4 years. Thus, option a is correct.

To know more about disease visit:

https://brainly.com/question/943439

#SPJ11

15. Match the following descriptions of transport processes with the appropriate terms. a. filtration b: secretion c. excretion. d. absorption e. reabsorption process of eliminating metabolic waste pr

Answers

Transport Processes and their descriptions are matched below:a. Filtration: Process of filtering particles from a fluid by passing it through a permeable material.

Process of movement of a substance from an internal organ or tissue to its exterior.c. Excretion: Process of eliminating metabolic waste products from an organism's body.d. Absorption: Process by which nutrients, drugs or other substances are taken up by the body. Process by which renal tubules and collecting ducts reabsorb useful solutes from the filtrate.

A pair of kidneys filter the blood by removing waste products and excess fluid, which are then eliminated from the body as urine. The blood is then reabsorbed in the body, and the essential nutrients are kept behind to prevent nutrient loss. In order to maintain homeostasis, the kidneys adjust the rate of filtration and reabsorption based on the body's needs and the urine output.If you want to learn about the transport process and related terms, you can study Transport Processes in Biology.

To know more about Filtration visit:

https://brainly.com/question/31609992

#SPJ11

What were the improvements to the skeletomuscular system made by
vertebrate fishes, and how did they function to allow these fishes
to grow bigger and stronger than the protochordates?

Answers

The vertebrate fishes made several improvements to the skeletal and muscular systems compared to protochordates, which allowed them to grow bigger and stronger. These improvements include:

1. Endoskeleton: Vertebrate fishes developed an internal skeleton made of bone or cartilage, providing better support and protection for their bodies compared to the notochord found in protochordates. The endoskeleton allowed for more efficient muscle attachment, enabling stronger muscle contractions and greater overall strength.

2. Segmented Muscles: Vertebrate fishes evolved segmented muscles, which are organized into myomeres along the length of their bodies. This segmentation allows for more precise and coordinated movement, facilitating greater agility and maneuverability. The segmented muscles also provide a stronger force for swimming and propulsion through water.

3. Improved Gills: Vertebrate fishes developed specialized gills for efficient oxygen exchange. These gills, protected by gill covers called opercula, increased the capacity for extracting oxygen from water. This enhanced respiratory system enabled fishes to extract more oxygen, allowing for sustained and active swimming, which contributed to their growth and strength.

4. Enhanced Jaw and Feeding Mechanisms: Vertebrate fishes evolved a more sophisticated jaw structure and feeding apparatus, including specialized teeth and jaws capable of capturing and processing a wider range of prey. This improved feeding mechanism allowed fishes to consume larger quantities and more diverse types of food, providing the necessary nutrients for growth and increased strength.

By possessing these improvements in the skeletal and muscular systems, vertebrate fishes were able to achieve larger body sizes, increased muscle mass, and enhanced swimming capabilities compared to protochordates. These adaptations provided advantages in hunting, escaping predators, and occupying different ecological niches, ultimately leading to their success and dominance in aquatic environments.

To know more about muscular systems click here:

https://brainly.com/question/8165532

#SPJ11

please in details , describe the feature of the endocrine system
for control in the blood glucose

Answers

The endocrine system maintains blood glucose control through the release of insulin and glucagon by the pancreas, which respectively lower and raise blood glucose levels. The liver plays a central role by storing and releasing glucose, while hormones from the adrenal glands contribute to glucose regulation during stress.

The endocrine system plays a crucial role in regulating blood glucose levels through a complex series of interactions involving various organs and hormones.

The main organs involved in blood glucose control are the pancreas, liver, and adrenal glands.

The pancreas produces two important hormones: insulin and glucagon. Insulin is released by beta cells in response to high blood glucose levels.

It promotes the uptake and utilization of glucose by cells, thereby lowering blood glucose levels.

Glucagon, released by alpha cells, has the opposite effect. It stimulates the liver to release stored glucose into the bloodstream, thereby increasing blood glucose levels.

The liver acts as a central regulator of blood glucose. It stores excess glucose as glycogen and releases it as needed.

When blood glucose levels drop, glucagon signals the liver to break down glycogen into glucose and release it into the bloodstream.

The adrenal glands release hormones such as cortisol and epinephrine (adrenaline) during times of stress.

These hormones increase blood glucose levels by promoting glucose production in the liver and reducing glucose uptake by cells.

In summary, the endocrine system regulates blood glucose levels through the coordinated actions of hormones such as insulin, glucagon, cortisol, and epinephrine.

This ensures a delicate balance between glucose uptake, storage, and release to maintain stable blood glucose concentrations.

To know more about endocrine refer here:

https://brainly.com/question/988500#

#SPJ11

"a. Define the different types of dominance presented in class.
b. Define and describe 2 specific examples of epistasis presented
in class.
5. Describe genotype by environment
interaction.

Answers

Different types of dominance exist in genetics: Complete dominance, Incomplete dominance, and Codominance. Complete dominance occurs when one allele completely masks the expression of the other allele.

In incomplete dominance, the heterozygous phenotype is an intermediate blend of the two homozygous genotypes. Codominance occurs when both alleles are fully expressed, resulting in the simultaneous presence of both phenotypes.

Epistasis is another genetic concept where one gene influences or masks the expression of another gene. For example, the Bombay phenotype in the ABO blood group system and coat color in mice demonstrate epistasis.

Genotype by environment interaction refers to the fact that the effect of a genotype on phenotype depends on the specific environment, highlighting the complex interplay between genes and environment in determining an organism's traits.

For more details regarding Codominance, visit:

https://brainly.com/question/3578928

#SPJ4

elections move around the nucleus of an atom in pathway called
a. shell
b. orbitals
c.circle
d.rings

Answers

Elections move around the nucleus of an atom in a pathway called shell.What are electrons?An electron is a negatively charged subatomic particle that moves around the nucleus of an atom in a shell. This is the primary answer.Furthermore, electrons travel in a shell or orbitals around the nucleus of an atom.

The answer is option A, and an explanation is given above.What is an atom?An atom is the fundamental unit of matter that includes a tiny, dense nucleus at its center, surrounded by negatively charged electrons moving around it in a shell or orbitals.

Each proton, the nucleus's positively charged particle, is linked to a single electron. The number of protons in the atomic nucleus determines an element's identity.

To know more on orbitals visit:

brainly.com/question/18914648

#SPJ11

What does it means to have non significant P value for control
and Treatment ?
anova p value (Treatment) = .45
anova p value (species) = .14

Answers

A p-value is used in statistical hypothesis testing to calculate the likelihood of a null hypothesis being true. A p-value of less than 0.05 (or 0.01, or even 0.001) indicates that the outcome is statistically significant.

On the other hand, a p-value that is greater than the predetermined threshold value implies that the outcome is statistically insignificant or, in other words, it is not supported by the data.The ANOVA table provides F-test statistics and p-values, which help in determining whether the variations between treatment groups are significantly higher than those within treatment groups. If the p-value is less than 0.05, it is typically regarded significant, and the null hypothesis is rejected.

In contrast, a p-value greater than 0.05 implies that the null hypothesis is supported (i.e., the distinctions observed are not statistically significant), and the experimental group is not distinguishable from the control group.The p-values you've given for the Treatment group and Species are greater than 0.05, indicating that the variations observed are not statistically significant. As a result, the null hypothesis is accepted, and no statistically significant distinctions were detected between the Treatment and control groups as well as between the Species.

To know more about Hypothesis testing visit-

brainly.com/question/29484622

#SPJ11

Ball and socket joints have ________ degrees of freedom and can
perform ________ movements (include any combination movements.)
Correct Answer: a three; seven Explanation Movements are:
Flexion/extens

Answers

Ball and socket joints have three degrees of freedom and can perform a wide range of movements.

Flexion and Extension: This movement involves bending and straightening the joint, typically bringing two bone segments closer together or further apart.

Abduction and Adduction: Abduction refers to moving a body part away from the midline of the body, while adduction refers to bringing it back towards the midline.

Circumduction: This movement combines flexion, extension, abduction, and adduction in a circular motion. It allows for a wide range of movements, such as drawing circles with the limb.

Rotation: The joint can rotate around its own axis, allowing for internal rotation (inward movement) and external rotation (outward movement) of the limb or body part.

Combination Movements: Ball and socket joints can perform various combinations of the above movements. For example, a shoulder joint can perform flexion with adduction or extension with abduction, allowing for complex movements such as throwing or reaching overhead.

To know more about socket joints

brainly.com/question/1305910

#SPJ11

Define biomagnification. Describe how the concentration of a chemical in an individual organism would compare between a primary producer and a tertiary consumer.

Answers

Biomagnification refers to the process by which the concentration of a chemical in an organism increases as it consumes prey containing the substance.

This is because as the chemical moves up the food chain, it becomes more concentrated in each organism. Primary producers (such as plants) are at the bottom of the food chain and generally have the lowest concentration of the chemical.

Herbivores (primary consumers) consume the plants and accumulate a higher concentration of the chemical in their bodies. Carnivores (secondary and tertiary consumers) consume the herbivores and accumulate an even higher concentration of the chemical in their bodies. Therefore, the highest concentration of the chemical would be expected in a tertiary consumer.

To know more about process visit:

https://brainly.com/question/14832369

##SPJ11

Solar radiation is the primary driver of the Earth's climate. Why is this statement true for almost all places on the planet? Explain, using at least one example, how microclimates affect your ecology (i.e., the ecology of an individual human!). Define the terms "soil texture" and "soil porosity". How are these two soil characteristics related? How does having a mainly clay textured soil influence ecosystem characteristics?

Answers

Solar radiation is the primary driver of Earth's climate because it is the ultimate source of energy that drives atmospheric processes. It provides the energy that fuels the greenhouse effect, which helps to regulate the Earth's temperature. It is true for almost all places on the planet because the Earth is a sphere that rotates on its axis and is constantly bathed in solar radiation from the sun. The amount of solar radiation received by different parts of the Earth varies due to differences in latitude and altitude, but the basic mechanism remains the same. For example, the poles receive less solar radiation than the equator, leading to colder temperatures.

Microclimates can have a significant impact on the ecology of an individual human. A microclimate is a small-scale climatic environment that is different from the surrounding area. For example, a person living in an urban area may experience a microclimate that is hotter and more polluted than the surrounding countryside. This can lead to a number of health problems, such as respiratory issues and heat exhaustion.

Soil texture refers to the relative proportions of sand, silt, and clay in the soil. Soil porosity refers to the amount of space between soil particles. These two soil characteristics are related because the more clay there is in the soil, the more tightly packed the soil particles will be, resulting in less porosity. Clay soils are generally more fertile than sandy soils because they are better able to hold onto water and nutrients. However, they can also be more prone to erosion and compaction, which can have negative effects on ecosystem characteristics.

To know more about atmospheric visit:-

https://brainly.com/question/28405832

#SPJ11

Explain how our gut communicates with our brain
How do STECs establish and cause disease in humans?
What is C. difficile? How does it resist antibiotic treatment? What is behind the success rate of fecal transplantations for control of C. difficile infections?

Answers

The Gut-Brain Communication describes how our gut communicates with our brain. Whereas STECs and Human Disease explains how STECs establish and cause disease in humans.

The C. difficile describes what C. difficile is and how it resists antibiotics, and Fecal Transplants for C. difficile explores the success of fecal transplantations in controlling C. difficile infections.

1. Gut-Brain Communication:

Our gut communicates with our brain through a bidirectional pathway known as the gut-brain axis.

This complex network involves various mechanisms such as the nervous system, immune system, and chemical messengers.

The gut-brain axis allows constant communication between the gut and the brain, influencing not only our digestion but also our emotions, mood, and overall well-being.

The primary mode of communication is through the vagus nerve, which connects the gut and the brain.

Additionally, the gut houses trillions of microbes called the gut microbiota, which produce neurotransmitters and other molecules that can directly affect brain function and behavior.

2. STECs and Human Disease:

STECs, or Shiga toxin-producing Escherichia coli, are a group of bacteria that can cause disease in humans. They establish and cause illness through multiple steps.

First, the bacteria are ingested through contaminated food or water. Once inside the gastrointestinal tract, they attach themselves to the lining of the intestines using specialized structures called fimbriae.

They then produce Shiga toxins, which are released and absorbed into the bloodstream.

These toxins damage the cells lining the blood vessels, leading to symptoms such as bloody diarrhea, kidney damage, and potentially life-threatening complications like hemolytic uremic syndrome.

3. C. difficile (Clostridium difficile) and Fecal Transplants:

Clostridium difficile, commonly known as C. difficile, is a bacterium that can cause severe gastrointestinal infections. It resists antibiotic treatment through various mechanisms.

C. difficile forms spores that are resistant to many antibiotics, allowing them to survive even in the presence of antimicrobial agents. Antibiotics can disrupt the balance of the gut microbiota, which normally helps keep C. difficile in check.

When the microbiota is disturbed, C. difficile can overgrow and cause infection. Fecal transplantation has shown a high success rate in controlling C. difficile infections.

To know more about Fecal transplantation, visit:

https://brainly.com/question/28482427

#SPJ11

Describe epigenetic changes to DNA and phenotypic expression in your own words; what is the 'epigenome'? Specifically, how do histones affect the structure DNA and the ability of certain genes to be read and transcribed (specifically consider the methylation of nucleotides and the acetylation of histones affecting their shape). Can changes in environmental factors, momentary and over the lifetime of an individual, create changes in phenotype / expression. If so, how does this occur?

Answers

Epigenetic changes to DNA and phenotypic expression Epigenetic modifications are heritable modifications to DNA and associated proteins that do not change the underlying DNA sequence but that impact gene transcription. They can be induced by various environmental factors and can be maintained throughout the lifetime of an organism, and can even be passed down to future generations. The epigenome refers to the full set of epigenetic modifications that can be made to an organism's DNA. One way that epigenetic modifications can be made is through the modification of histones, which are proteins that DNA wraps around.

When a histone is acetylated, it becomes less positively charged and thus is less able to interact with negatively charged DNA molecules. This makes the DNA more accessible to transcription factors, which can lead to increased gene expression. Conversely, when a histone is methylated, it can become more positively charged, making it more likely to interact with negatively charged DNA molecules and thus making the DNA less accessible to transcription factors, which can lead to decreased gene expression. Environmental factors can have a significant impact on the epigenome. For example, exposure to certain chemicals or toxins can induce epigenetic modifications that lead to increased cancer risk or other diseases. In addition, changes in diet or exercise habits can lead to epigenetic modifications that impact metabolic function and other physiological processes. Over the course of an individual's lifetime, the accumulation of these modifications can lead to changes in phenotype and disease risk.

However, the epigenome is not set in stone, and changes in environmental factors can also lead to changes in gene expression and phenotype. By understanding the epigenetic mechanisms underlying these changes, it may be possible to develop targeted therapies that can help prevent or treat a wide range of diseases and conditions. In summary, epigenetic changes to DNA and phenotypic expression refer to the heritable modifications to DNA and associated proteins that impact gene transcription, and these modifications can be induced by various environmental factors. The epigenome refers to the full set of epigenetic modifications that can be made to an organism's DNA, and one way that epigenetic modifications can be made is through the modification of histones. Environmental factors can have a significant impact on the epigenome, and changes in environmental factors can lead to changes in gene expression and phenotype.

To know more about DNA visit:-

https://brainly.com/question/30006059

#SPJ11

A cell has the following molecules and structures enzymes, circular DNA, ribosomes, plasma membrane and a cell wall. It could a cell from Select one OA. an animal, but not a plant B. a plant, but not an animal Ca bacterium, a plant, or an animal Da bacterium. E a plant or an animal

Answers

The cell with enzymes, circular DNA, ribosomes, plasma membrane, and a cell wall could be a bacterium. Bacteria are single-celled organisms that possess all of these components. They have enzymes for various cellular processes, circular DNA as their genetic material, ribosomes for protein synthesis, a plasma membrane that regulates the passage of substances, and a cell wall that provides structural support.

Bacteria can be found in various environments and exhibit diverse characteristics. They can be classified into different types based on their shape, metabolic processes, and other features. While bacteria are present in both plants and animals, the given components are characteristic of a bacterial cell rather than a eukaryotic cell found in plants or animals. Therefore, the most appropriate answer would be option D, a bacterium.

To know more about enzymes,

https://brainly.com/question/31385011

#SPJ11

What is the importance of the srtA gene for some bacteria? Given what you already know about the bacteria you studied, would you have expected it to contain srtA genes? What about the other two bacteria? Explain your answer below. (2 marks).
Note: I culture Three different bacteria, Escherichia Coli, Staphylococcus Epidermidis and Bacillus Subtilis.

Answers

The srtA gene is important for bacteria because it encodes the sortase A enzyme, which plays a crucial role in the anchoring and assembly of surface proteins. For Escherichia coli, Staphylococcus epidermidis, and Bacillus subtilis, the presence of srtA genes would be expected in certain bacteria based on their characteristics and lifestyles.

The srtA gene is particularly important for bacteria that possess surface proteins that require anchoring to the cell wall or extracellular matrix. These proteins are involved in various functions such as adhesion, colonization, immune evasion, and biofilm formation. The sortase A enzyme, encoded by the srtA gene, cleaves the surface proteins at a specific motif and covalently attaches them to peptidoglycan or other cell surface components.

Escherichia coli is a gram-negative bacterium known for its role in intestinal commensalism and pathogenicity. While E. coli strains may possess surface proteins, they typically utilize alternative mechanisms for protein anchoring, such as the autotransporter system. Therefore, the presence of srtA genes would not be expected in E. coli.

Staphylococcus epidermidis is a gram-positive bacterium commonly found on human skin and mucous membranes. It is known for its biofilm-forming abilities, and many of its surface proteins require sortase-mediated anchoring. Therefore, it would be expected for S. epidermidis to contain srtA genes.

Bacillus subtilis is a gram-positive bacterium and a model organism for studying bacterial physiology and genetics. It is capable of forming biofilms and producing surface proteins involved in various functions. While B. subtilis can utilize both sortase-dependent and sortase-independent mechanisms for protein anchoring, the presence of srtA genes would still be expected in certain strains that rely on sortase-mediated anchoring.

In conclusion, the presence of srtA genes would be expected in Staphylococcus epidermidis due to its biofilm-forming capabilities, while Escherichia coli and Bacillus subtilis may or may not contain srtA genes depending on the specific strains and their surface protein anchoring mechanisms.

Learn more about proteins here: https://brainly.com/question/30892662

#SPJ11

correct terms in the answer blanks. 2. Complete the following statements concerning smooth muscle characteristics by inserting the 1. Whereas skeletal muscle exhibits elaborate connective tissue cover

Answers

Smooth muscle and skeletal muscle exhibit distinct characteristics. In contrast to skeletal muscle, smooth muscle lacks elaborate connective tissue cover.

Smooth muscle is a type of muscle tissue found in various organs of the body, such as the walls of blood vessels, digestive tract, and respiratory system. Unlike skeletal muscle, which is attached to bones and exhibits a striped or striated appearance, smooth muscle is non-striated and lacks the distinct banding pattern. Smooth muscle cells are spindle-shaped and have a single nucleus.

One of the significant differences between smooth muscle and skeletal muscle is the presence of connective tissue cover. Skeletal muscle is surrounded by a complex network of connective tissue layers, including the epimysium (outermost layer), perimysium (surrounding muscle bundles), and endomysium (encasing individual muscle fibers).

These connective tissue layers provide structural support, anchor the muscle to bones, and facilitate force transmission during muscle contractions. In contrast, smooth muscle lacks this elaborate connective tissue cover. Instead, smooth muscle cells are connected to one another through gap junctions, allowing coordinated contractions across the muscle tissue.

Overall, while skeletal muscle is characterized by its striated appearance and extensive connective tissue cover, smooth muscle lacks striations and has a simpler organization with minimal connective tissue. These differences contribute to the distinct functional properties and roles of smooth muscle and skeletal muscle in the body.

To learn more about digestive tract visit:

brainly.com/question/9225480

#SPJ11

--A 23-year-old-man is brought to the emergency department after he was stabbed in the right upper quadrant of the abdomen. his blood pressure is 70/42 mm Hg, pulse is 135/min, and respirations are 26/min; pulse oximetry shows oxygen saturation of 95% on room air. Physical examination shows a stab wound 2 cm inferior to the right costal margin. The patient;s abdomen is firm and distended. Focused assessment with sonography for trauma (FAST) is positive for blood in the right upper quadrant. He is taken for immediate laparotomy, and approximately 1 liter of blood is evacuated from the peritoneal cavity.
Brisk, nonpulsatile bleeding is seen emanating from behind the liver. The surgeon occludes the hepatoduodenal ligament, but the patient continues to hemorrhage. Which of the following structures is the most likely source o this patient's bleeding?
Inferior vena cava <-----
Common bile duct
Hepatic artery
Cystic artery
Portal vein

Answers

In this patient with a stab wound in the right upper quadrant of the abdomen and signs of hypovolemic shock, the most likely source of bleeding despite occlusion of the hepatoduodenal ligament is the hepatic artery, option 3 is correct. 

The hepatic artery is a branch of the celiac trunk that supplies oxygenated blood to the liver. It runs alongside the common bile duct and the portal vein within the hepatoduodenal ligament. In this case, the surgeon's inability to control bleeding after occlusion of the hepatoduodenal ligament suggests that the hemorrhage is not originating from a venous source (inferior vena cava or portal vein) or the cystic artery, which is typically encountered during cholecystectomy.
Additionally, the common bile duct does not carry a significant arterial blood supply. Therefore, the most likely source of brisk, nonpulsatile bleeding in this patient is the hepatic artery, which requires prompt surgical intervention to achieve hemostasis and prevent further blood loss, option 3 is correct.


To learn more about hepatic follow the link:

https://brainly.com/question/28208729


#SPJ4


The Complete question is:


A 23-year-old-man is brought to the emergency department after he was stabbed in the right upper quadrant of the abdomen. his blood pressure is 70/42 mm Hg, pulse is 135/min, and respirations are 26/min; pulse oximetry shows oxygen saturation of 95% on room air. Physical examination shows a stab wound 2 cm inferior to the right costal margin. The patient;s abdomen is firm and distended. Focused assessment with sonography for trauma (FAST) is positive for blood in the right upper quadrant. He is taken for immediate laparotomy, and approximately 1 liter of blood is evacuated from the peritoneal cavity.Brisk, nonpulsatile bleeding is seen emanating from behind the liver. The surgeon occludes the hepatoduodenal ligament, but the patient continues to hemorrhage. Which of the following structures is the most likely source o this patient's bleeding?

1) Inferior vena cava 

2) Common bile duct

3) Hepatic artery

4) Cystic artery

5) Portal vein

What is the purpose of the mordant in a staining technique?
1) it removes excess stain
2) it removes color
3) it helps prevent the removal of the primary stain
4) it reduces contrast to make the specimen easier to view
The product(s) of homolactic fermentation include:
1) lactic acid and carbon dioxide
2) lactic acid only
3) carbon dioxide only
4) ethanol and lactic acid

Answers

The purpose of the mordant in a staining technique is to help prevent the removal of the primary stain.

The correct answer is it helps prevent the removal of the primary stain.

In staining techniques, the mordant is an additional step that follows the application of the primary stain. Its purpose is to enhance the binding or affinity of the stain to the target structure or organism. The mordant forms insoluble complexes with the primary stain, creating a more stable and long-lasting coloration. By binding the stain tightly to the target, the mordant helps prevent the removal or fading of the primary stain during subsequent washing or rinsing steps.

The mordant is particularly important in certain staining methods, such as Gram staining in microbiology. In Gram staining, the mordant (usually iodine) forms a complex with the crystal violet stain, helping it to bind to the peptidoglycan layer in the cell wall of bacteria. This complex is more resistant to decolorization, allowing for the differentiation of Gram-positive and Gram-negative bacteria based on their retention or loss of the primary stain. Without the mordant, the primary stain could be easily washed away, leading to inaccurate or inconclusive staining results.

Learn more about peptidoglycan here:

https://brainly.com/question/2098641

#SPJ11

Which is true of telomeres in the line of cells that undergo Melosis (germ cells) to produce gametes? Telomeres zet shorter with each new generation of cells Telomeres code for protective proteins Telomers are maintained at the same length They are haploid they are plaid

Answers

The correct answer is Telomeres get shorter with each new generation of cells.

Correct option is A.

Telomerase are special stretches of nucleotides located at the end of the chromosomes. They serve a important role in restricting the number of times a cell can divide, and are thus necessary for maintaining the integrity of cells during multiple replication cycles. In gamete-producing cells, telomeres shorten with each cell division.

This process leads to an eventual decline in cell function and mortality of the cell. The shortening of telomeres is caused by the action of an enzyme called telomerase, which is responsible for maintaining the length of the telomeres at a constant level, however, the amount of telomerase present in cells is insufficient to counteract the wearing away of telomeres.

Correct option is A.

know more about Telomeres here

https://brainly.com/question/30669390#

#SPJ11

Often the reproductive system is something many patients might struggle to discuss with their medical providers. Why do you think this might be? Select a topic from this week's reading about the repro

Answers

One possible reason why patients might struggle to discuss their reproductive system with their medical providers is the cultural and societal taboos surrounding topics related to uality and reproduction.

In many cultures, discussions about reproductive health, ual behavior, and intimate concerns are considered private or sensitive subjects. This can lead to feelings of embarrassment, shame, or discomfort when discussing these topics openly.

Additionally, there may be personal or psychological factors that contribute to the hesitation in discussing reproductive health. Some individuals might have had negative experiences or trauma related to their reproductive system, which can make it challenging to talk about. They may fear being judged, misunderstood, or stigmatized by their healthcare provider. Lack of knowledge or misconceptions about reproductive health can also contribute to the reluctance to initiate discussions.

Furthermore, the power dynamics between patients and healthcare providers can influence the WILLINGNESS to discuss reproductive health. Patients may perceive healthcare providers as authority figures, leading to concerns about judgment or dismissal of their concerns. They may also fear being coerced into unwanted treatments or interventions.

To address these barriers, healthcare providers need to create a safe and non-judgmental environment that promotes open communication. Building trust, actively listening, and being sensitive to cultural and individual beliefs are crucial in encouraging patients to discuss their reproductive health concerns. Patient education and awareness programs can also help to break down societal taboos and empower individuals to seek the information and support they need for their reproductive well-being.

Learn more about reproductive system here:

https://brainly.com/question/32048922

#SPJ11

4) (true/false) most prokaryotic operons are self-regulating - where end-products of the gene- specific biosynthetic pathway inhibit that gene's expression 5) The CAMP/CAP regulation in the lac operon helps to ensure that : a) ß-Galactosidase is produces when lactose is present. b) ß-Galactosidase is produces when lactose is absent. c) ß-Galactosidase is produces when galactose is absent.
d) ß-Galactosidase is produces when glucose is absent.

Answers

Most prokaryotic operons are self-regulating - where end-products of the gene- specific biosynthetic pathway inhibit that gene's expression.

The statement given above is True. In the case of biosynthetic pathways, a high concentration of the end-product inhibits the expression of genes involved in the biosynthetic pathway of the particular end-product, and this is known as feedback inhibition. In this type of inhibition, the end-product itself plays a vital role in regulating the biosynthesis of the product. The CAMP/CAP regulation in the lac operon helps to ensure that ß-Galactosidase is produced when glucose is absent.CAMP is produced in bacterial cells when the glucose level is low. Cyclic AMP is abbreviated as CAMP, and it activates the CAP (catabolite activator protein) regulatory protein when glucose is absent. In the absence of glucose, the CAP binds to the CAP binding site, resulting in the stimulation of RNA polymerase and the transcription of the operon genes. So, the correct option is: ß-Galactosidase is produces when glucose is absent.Main Ans: Most prokaryotic operons are self-regulating where end products of the gene-  specific biosynthetic pathway inhibit that gene's expression. The CAMP/CAP regulation in the lac operon helps to ensure that ß-Galactosidase is produced when glucose is absent.

We can say that most of the prokaryotic operons are self-regulating where end-products of the gene-specific biosynthetic pathway inhibit that gene's expression. The CAMP/CAP regulation in the lac operon helps to ensure that ß-Galactosidase is produced when glucose is absent. CAMP activates the CAP regulatory protein in the absence of glucose, and it binds to the CAP binding site, resulting in the stimulation of RNA polymerase and the transcription of the operon genes.

Learn more about glucose level here:

brainly.com/question/29574807

#SPJ11

Which of the following occurs in the process of
transcription?
Group of answer choices
DNA
is replicated
RNA
is synthesized
protein is produced
mutations are repaired

Answers

RNA stands for Ribonucleic Acid. It is a molecule that plays a crucial role in various biological processes, including the expression of genes and protein synthesis.

RNA is synthesized:

Transcription is the process by which genetic information encoded in DNA is used to synthesize RNA molecules. During transcription, an RNA polymerase enzyme binds to a specific region of the DNA called the promoter.

The RNA polymerase then moves along the DNA template strand, synthesizing a complementary RNA molecule by adding nucleotides in a sequence dictated by the DNA template.

In transcription, the DNA sequence is not replicated, meaning that the DNA double helix remains intact. Instead, a single-stranded RNA molecule is produced, which is complementary to the DNA template strand.

Learn more about RNA here:

https://brainly.com/question/14539404

#JSP11

Describe the difference between a mutation that occurs due to a nucleotide substitution and one that occurs as a result of an insertion or deletion (a frameshift mutation). Which is likely to be more harmful to a cell? Explain your answer.

Answers

When one nucleotide in the DNA sequence is changed for another, the process is known as a nucleotide substitution mutation, also referred to as a point mutation.

Three different types of point mutations may result from this: nonsense mutations (premature stop codon), missense mutations (change in a single amino acid), and silent mutations (no change in the amino acid sequence).Contrarily, a frameshift mutation, also known as an insertion or deletionmutation, modifies the reading frame during translation by introducing or deleting nucleotides from the DNA sequence. Due to the alteration in how the genetic code is read as a result, the final protein sequence is significantly altered. A non-functional or shortened protein is frequently the outcome of frameshift mutations.

learn more about sequence here :

https://brainly.com/question/30262438

#SPJ11

Describe the formation of the major organ systems and growth of
the fetus. Discuss the role of stem cells in development and
describe the theories behind the Developmental Origins of Health
and Diseas

Answers

Formation of Major Organ Systems and Fetal Growth:

During embryonic development, the major organ systems of the fetus form through a process called organogenesis. This process involves the differentiation and specialization of cells into specific tissues and organs. The major organ systems, including the nervous system, cardiovascular system, respiratory system, digestive system, urinary system, and musculoskeletal system, develop through a series of complex interactions between different cell types.

The process begins with the formation of three germ layers: the ectoderm, mesoderm, and endoderm. Each germ layer gives rise to specific tissues and organs. For example, the ectoderm develops into the nervous system, skin, hair, and nails. The mesoderm forms the muscles, bones, blood vessels, heart, kidneys, and reproductive organs. The endoderm differentiates into the respiratory tract, gastrointestinal tract, liver, and pancreas.

As the fetus continues to grow, the organs undergo further development and maturation. This includes the growth of tissues, the formation of specific structures within organs, and the establishment of functional connections between different parts of the body. Hormonal signals, genetic factors, and environmental cues play crucial roles in regulating these processes.

Role of Stem Cells in Development:

Stem cells are undifferentiated cells with the ability to self-renew and differentiate into specialized cell types. They play a crucial role in the development of the fetus by giving rise to different cell lineages and contributing to the formation of various tissues and organs.

During early embryonic development, pluripotent stem cells, such as embryonic stem cells, can give rise to cells of all three germ layers. These cells have the potential to differentiate into any cell type in the body. As development progresses, the pluripotent stem cells become more restricted in their differentiation potential and give rise to multipotent stem cells. These multipotent stem cells have a more limited capacity to differentiate into specific cell lineages.

Stem cells continue to be important in the growth and maintenance of tissues and organs throughout fetal development. They provide a source of new cells for tissue repair and regeneration, and they play a role in organ homeostasis and adaptation to changes in the environment.

Developmental Origins of Health and Disease (DOHaD):

The Developmental Origins of Health and Disease is a field of study that investigates how early-life experiences and exposures can influence the risk of developing diseases later in life. It suggests that environmental factors, such as maternal nutrition, stress, toxins, and other conditions during fetal development, can have long-lasting effects on health and disease susceptibility.

The theory behind DOHaD posits that the developing fetus is highly sensitive to its environment and can adapt to different conditions. Adverse environmental exposures during critical periods of development can disrupt normal developmental processes, leading to permanent changes in organ structure and function. These changes may not manifest as disease immediately but can increase the risk of developing various health conditions, including cardiovascular disease, diabetes, obesity, and mental health disorders, later in life.

To know more about respiratory system click here,

https://brainly.com/question/4190530

#SPJ11

1. If you weigh 130 pounds, how much do you weigh in kg? (2.2 pounds = 1kg). Make the following metric conversions: 2. 3.5m = cm 3. 275g = mg 4. 0.25 L = mL What is the volume of water in each of the measuring devices? A B What is the name of the measuring device used in 10 In an experiment, one group goes through all of the steps of an experiment but lacks or is not exposed to the factor being tested. What is this group?

Answers

The name of the measuring device used in 10 is the control group. In an experiment, one group goes through all of the steps of an experiment but lacks or is not exposed to the factor being tested. This group is referred to as the control group.

1. If you weigh 130 pounds, your weight in kg will be: \[130 \div 2.2=59.09\text{ kg}\]

2. Given: 3.5mTo find: In centimeter (cm)Conversion: 1 meter = 100 cm

Hence, 3.5 m = 3.5 × 100 cm = 350 cm. Therefore, 3.5m is equal to 350cm.

3. Given: 275gTo find: In milligrams (mg)Conversion: 1 gram = 1000 mg Therefore, 275g = 275 × 1000 mg = 275000 mg. Therefore, 275g is equal to 275000mg.

4. Given: 0.25LTo find: In milliliter (mL)Conversion: 1 liter = 1000 mL Therefore, 0.25 L = 0.25 × 1000 mL = 250 mL. Therefore, 0.25L is equal to 250mL.

Volume of water in each of the measuring devices:

A. The graduated cylinder reads as 35 mL, hence the volume of water in measuring device A is 35 mL.

B. The beaker is not graduated, hence it is impossible to tell the exact volume. Therefore, the volume of water in measuring device B cannot be determined. It is important to include a control group in an experiment because it provides a baseline or standard for comparison to the experimental group. It helps to determine the true effect of the variable being tested on the dependent variable.

To know more about control group visit:

https://brainly.com/question/32257330

#SPJ11

Jean-Baptiste Lamarck involved which model for large-scale evolutionary change?
A. dynamic, monophyletic, branching speciation
B. dynamic, polyphyletic, non-branching speciation
C. static, monophyletic, branching speciation
D. static, monophyletic, non-branching speciation
E. static, polyphyletic, branching speciation

Answers

Jean-Baptiste Lamarck involved dynamic, polyphyletic, non-branching speciation model for large-scale evolutionary change.

How did Jean-Baptiste Lamarck make a lasting impact on evolutionary theory?Lamarck was the first to propose a comprehensive evolutionary theory, which is one of his most enduring legacies. Although Lamarck's mechanism of evolution has been shown to be mostly incorrect.

His idea that acquired traits could be passed down to offspring has been proven right in some situations, such as epigenetic inheritance.Moreover, Lamarck was the first to make a distinction between plants and animals, and he was one of the first to recognise that animals could adapt to their surroundings.

To know more about evolutionary visit:

https://brainly.com/question/10773806

#SPJ11

Name Lab Section Date 1. The apex of the heart is formed by the a. right atrium. b. left atrium. ventricle. d. left ventricle. 2. Which heart groove travels between the atria and the ventricle

Answers

The apex of the heart is formed by the left ventricle. The correct option is D.

The left ventricle is the lower, pointed tip of the heart and is responsible for pumping oxygenated blood to the rest of the body. It is the primary contributor to the formation of the apex.

The heart groove that travels between the atria and the ventricles is called the coronary sulcus (also known as the atrioventricular groove or atrioventricular sulcus). It encircles the heart horizontally and separates the atria (upper chambers) from the ventricles (lower chambers).

The coronary sulcus contains important blood vessels and is a critical landmark in the anatomy of the heart.

To know more about left ventricle, refer here:

https://brainly.com/question/30869167#

#SPJ11

Comprehension: The Hershey-Chase Experiment Even though scientists knew of the existence of DNA by the 1860 s, they were unsure of whether DNA or protein was the genetic material in a cell. Many of them assumed that proteins must carry the genetic information because proteins are more complex than DNA. In 1952, Alfred Hershey and Martha Chase carried out a series of experiments using viruses that helped figure out the problem. Recall from Chapter 1 that viruses are composed of nucleic acid packaged in a protein coat. When Hershey and Chase designed their experiments, it was already known that in order to replicate, viruses must use a host's cellular components such as enzymes to make new viral particles. Hershey and Chase used a type of virus called a bacteriophage (or phage) -viruses that infect bacteria-for their work. The bacteriophage Hershey and Chase used in these experiments was T2, which has a DNA genome; this phage infects E. coll. During replication, T2 injects its DNA into the bacterial host cell but its protein coat remains outside the bacterial cell. Hershey and Chase used radioactive isotopes to label the two components of the T2 bacteriophage. In one experiment, they labeled the phage DNA with the radioactive isotope 32p. In the next experiment, they labeled the phage proteins with radioactive isotope 35 S. The researchers then mixed their radioactive bacteriophages with E coll, allowing enough time for the viruses to attach to the bacteria and inject their genetic material into those cells. At that point, they separated the viruses from the bacteria by centrifugation. They then analyzed the bacteria. looking for radioactivity. They found that the bacteria were radioactive when they had been infected by the bacteriophages that had 32p.labeled DNA but not when they were infected by the bacteriophages that had 35 S-labeled protein. This lead them to conclude that the bacteriophages had injected their DNA into the host cell, and that DNA is thus the genetic material. why did scientists originally believe that genetic material was protein rather than DNA? a) they already knew that viruses could replicate, and since bacteriophages don't have any DNA, they assumed that the virus proteins must have a major role in the replication process. b) They had absolutely no idea what was going on in cells so they took a wild guess and decided that proteins must be the genetic material because cells have so many proteins. c) They could easily isolate protein from cells but they could not isolate DNA, so they were not sure that it even existed. d) Proteins are more complex in structure than DNA; they thought DNA was too simple in structure to have such an important cellular role.

Answers

Proteins are more complex in structure than DNA; they thought DNA was too simple in structure to have such an important cellular role.

Scientists originally believed that genetic material was protein rather than DNA because proteins were considered to be more complex in structure. At the time, proteins were known to have intricate three-dimensional structures and were involved in various cellular processes, making them seem more likely to carry genetic information. On the other hand, DNA was thought to have a simple repetitive structure of nucleotides and was not initially recognized for its role in carrying genetic information.

Additionally, scientists had already observed that viruses could replicate, and since bacteriophages (viruses that infect bacteria) were known to lack DNA, it was assumed that the proteins present in the virus must play a major role in the replication process.

However, the Hershey-Chase experiment conducted in 1952 provided strong evidence that DNA, not proteins, is the genetic material. By using radioactive isotopes to label the components of bacteriophages, they demonstrated that only the radioactive DNA was transferred into the bacterial host cell, leading to the production of new viral particles. This experiment helped to establish DNA as the primary carrier of genetic information in cells.

Overall, the original belief that proteins were the genetic material was based on their perceived complexity compared to DNA's simpler structure, but subsequent research, including the Hershey-Chase experiment, revealed the fundamental role of DNA in heredity and cellular function.

To know more about Proteins click here:

https://brainly.com/question/30986280

#SPJ11

Other Questions
The grinder has a force of 400 N in the direction shown at the bottom. The grinder has a mass of 300 kg with center of mass at G. The wheel at B is free to move (no friction). Determine the force in the hydraulic cylinder DF. Express in newtons below. 1.Find the period of the following functions. a) f(t) = (7 cos t) b) f(t) = cos (2t/m) Learning Goal: Part A - Moment about the x axis at A A solid rod has a diameter of e=60 mm and is subjected to the loading shown. Let a=180 mm,b=200 mm,c= 350 mm,d=250 mm, and P=5.0kN. Take point A to Part B - Moment about the z axis at A be at the top of the circular cross-section. Why do the indicated protons have differing acidities on the twomolecules - despite the two structures having the same molecularweight?The ketone is less acidic than the alkane because it has a resonance structure destablized by electronic effects. The ketone is more acidic than the alkane because it has fewer protons. The ketone Is A sensitive instrument of mass 100 kg is installed at a location that is subjected to harmonic motion with frequency 20 Hz and acceleration 0.5 m/s. If the instrument is supported on an isolator having a stiffness k = 25x104 N/m and a damping ratio & = 0.05, determine the maximum acceleration experienced by the instrument. Suppose that a constraint is added to a cost minimization problem. Is it possible for the new optimal cost to be greater than the original optimal cost? Is it possible for the new optimal cost to be less than the original optimal cost?Next, suppose that a constraint is removed from a profit maximization problem. Is it possible for the new optimal profit to be greater than the original optimal profit? Is it possible for the new optimal profit to be less than the original optimal profit? 4 . 2 points The barium ion is toxic to humans. However, barium sulfate is comnsoaly wed as an imnge enhancer for gastroiatestinal \( x \)-rays. What isoes this impty about tie poation of the equilibr Which of the following is TRUE regarding translation in prokaryotes? a. The formation of the peptide bond is catalysed by an enzyme within the 50S subunit. Ob. The binding of elongation factor Tu (EF-Tu) to the A site displaces the peptidyl- tRNA and stimulates translocation. Oc. The binding of elongation factor Tu (EF-Tu) to the A site displaces the peptidyl- tRNA and stimulates translocation. Od. Which charged tRNA enters the ribosome complex depends upon the mRNA codon positioned at the base of the P-site. Oe. RF1 and RF2 each recognise the stop codon UAA, with each individually recognising one of the other two stop codons. A string oscillates according to the equation: y(x, t) (0.50 cm) sin)] cos (40ms )t). What are the amplitude and speed of the wave? ABF Corp. is considering a project with a life of 4 years that will require $148,000 for fixed assets and $42,400 for net working capital. The fixed assets will be depreciated using the Year 2018 bonus depreciation method. At the end of the project, the fixed assets can be sold for $37,500 cash and the net working capital will return to its original level. The project is expected to generate annual sales of $195,000 and costs of $117,500. The tax rate is 24 percent and the required rate of return is 13 percent. What is the project's net present value?A. $102,114.24B. $65.234.16C. $59.714.29 Air enters and exits a control volume containing an unknown device (machine). You are able to measure the mass flow rate of air entering the device, as well as the temperature and pressure at both the inlet and outlet. You are also able to measure the surface temperature of the device. There is a shaft transferring work across the control volume boundary, and there is energy transfer by heat occurring across the boundary that you have measured to be +500kW according to the usual thermodynamics sign convention. a. Using a control volume that corresponds to the outer surface of the machine, write out the three "very important" equations that apply to this control volume. A sketch may help you. b. Make the following assumptions and then simplify the equations from a. above. Kinetic and potential energy effects can be neglected. The device is operating at steady-state. The air can be modeled as an ideal gas. No other fluids are entering or leaving the control volume. c. In the simplified equations from b. above, highlight the values that are known and the values that you could look up. For items d., e., f., and g., if additional relations or equations are required, then write them down. d. Do you have enough information to calculate the work, in kW? Explain. e. Do you have enough information to determine the nature of the process (reversible, irreversible, or impossible)? Explain. f. Do you have enough information to determine what this device is? Explain. g. Do you have enough information to calculate an isentropic efficiency of the device? Explain. points In the conducting zone of the lungs oxygen diffuses more readily than carbon dioxide air is humidified surfactant is produced dust particles are trapped air flow is inversely proportional to airway resistance 2 2 points During inspiration at rest, the external intercostal muscles contract transpulmonary pressure increases intrapleural pressure increases alveolar volume decreases the diaphragm contracts The function of transverse tubules is to a) release Ca2+ from the sarcoplasmic reticulum. b) ensure a supply of glycogen throughout the muscle sarcoplasm. Oc) store Ca2+ ions inside the muscle fiber. if an RER of 1.0 means that we are relying 100% on carbohydrateoxidation, how it is that we end up measuring RERs above 1.0? Water flows through a long pipe of diameter 10 cm. Assuming fully developed flow and that the pressure gradient along the pipe is 400 Nm3, perform an overall force balance to show that the frictional stress acting on the pipe wall is 10 Nm2. What is the velocity gradient at the wall? question content areaan acceleration in the collection of receivables will tend to cause the accounts receivable turnover to a. either increase or decrease. b. increase. c. remain the same. d. decrease. You as a food processing plant engineer are tasked with designing a newline for processing canned apples. The new line is planned for a production of 3,000units of canned apples per hour working 10 hours per day, Monday through Friday. each canIt has a capacity for 250 grams, of which 200 grams are apples and 50 grams of water. LaterAfter being processed, the cans filled with the product are subjected to a steam sterilization process. TheVapor enters as saturated vapor at 150 kPa and leaves as saturated liquid at the same pressure. At the beginningprocess, the canned products enter at a temperature of 20C and after sterilization they leave at atemperature of 80C. The product must then be cooled to a temperature of 17C in a water bath.cold.1. Calculate the steam flow needed to heat the product to the desired temperature. Determine andselect the boiler (or boilers or any equipment that performs the function) necessary to satisfy theplant's need for steam. Include as many details of the selected equipment as possiblesuch as brand, capacity, etc.2. Calculate the flow of cold water required to cool the product to the desired temperature if the waterIt enters the process at 10C and should not leave at more than 15C. Determine and select the "chiller" (or the"chillers" or any equipment that performs the necessary function(s) to meet the needs of the plant.Include as many details of the selected equipment as brand, capacity, etc. Rods of 20 cm diameter and 5 m length are compressed by 1 cm if the material has an elastic modulus of 84 GPa and a yield stress of 272 MPa determine the maximum stored elastic strain energy per unit volume (in kJ/m). Please provide the value only. If you believe that is not possible to solve the problem because some data is missing, please input 12345 Consider a series of residential services being fed from a single pole mounted transformer.a. Each of my 10 residential services require a 200A service entrance panelboard that is capable of providing 200A of non-continuous load. How large should my transformer be?b. Size the conductors for these service entrances. Assuming these are aerial conductors on utility poles, which section of the NEC would you use to ensure your service entrance is fully code compliant?c. I am designing a rec-room for these houses, in which will be six general use duplex receptacles, and a dedicated 7200 watt-240V electrical heater circuit. The room will also need lighting, for which I am installing four, 120 watt 120V overhead fixtures. Identify the number and size of the electrical circuit breakers needed to provide power to this room Compare and contrast DNA vs RNA vs protein (structures and bondtypes)