Answer: 44.706g Al2O3
Explanation:
4A1 + 302 → 2Al2O3
3×(16×2) 2{(27×2)+(16×3)}
= 96 = 204
So
To produce 204g of Al2O3,We need . 96g of O2
To produce 1g of Al2O3,We need
. (96÷204)= 0.47g of O2
To produce 95g of Al2O3,We need
. (0.47×95)= 44.706g of O2
.
So, 44.706 grams of oxygen (O2)
are needed to produce 95 grams of
aluminum oxide (Al2O3).
if 13 moles of Fe react, what is the mass of FeS produced?
Answer:
1144 g of FeS
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
Fe + S —> FeS
From the balanced equation above,
1 mole of Fe reacted to produce 1 mole of FeS.
Therefore, 13 moles of Fe will also react to produce 13 moles of FeS.
Finally, we shall determine mass of 13 moles of FeS. This can be obtained as follow:
Mole of FeS = 13 moles
Molar mass of FeS = 56 + 32
= 88 g/mol
Mass of FeS =?
Mass = mole × molar mass
Mass of FeS = 13 × 88
Mass of FeS = 1144 g
Therefore, 1144 g of FeS were obtained from the reaction.
Calculate the concentration of a 220 g solution of calcium chloride (CaCl2) that has a volume of 11 L
Answer: The concentration of the solution is 0.18 M
Explanation:
Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
[tex]Molarity=\frac{n}{V_s}[/tex]
where,
n = moles of solute
[tex]V_s[/tex] = volume of solution in L
moles of [tex]CaCl_2[/tex] = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{220g}{111g/mol}=1.98mol[/tex]
Now put all the given values in the formula of molality, we get
[tex]Molarity=\frac{1.98mol}{11L}=0.18M[/tex]
Therefore, the concentration of the solution is 0.18 M
Why is there no answer
Answer:
i don't know
Explanation:
"pure water does not conduct electricity. But some tap water probably can. Which best explains this?" a . Tap water is H20 b . Pure water is H20 c . Some tap water has minerals, such as iron in it.
Explanation:
"pure water does not conduct electricity. But some tap water probably can."
The reason why pure water does not conduct electricity is due to the absence of mineral and metal containing salts. Pure water is made up of only Hydrogen and oxygen atom as represented by the formula; H2O
Tap water on the other hand are most likely able to conduct electricity due to the presence of these ions. They may arise from impurities or during treatment processes.
The correct options are;
b . Pure water is H2O
c . Some tap water has minerals, such as iron in it.
The number of protons is equal to
a the number of neutrons.
b the atomic mass.
c the number of electrons.
d the atomic number.
Answer:
c the number of electrons
What is the mass of water released by the heating? Show your work or explain your reasoning.
Answer:
Dividing the mass of the water lost by the original mass of hydrate used is equal to the fraction of water in the compound. Multiplying this fraction by 100 gives the percent water in the hydrate.
Explanation:
The amount of water throughout the compound has been determined by dividing the mass of water wasted mostly by original quantity of hydrate used. The above fraction can be multiplied by 100 to get the hydrate's water content in percentages.
What is mass ?The proportion of matter that makes up an object is quantified by its mass. The kilogram, or kg, would be the fundamental SI unit of mass.
What is hydrate?Any substance that contains water through the form of H2O molecules is referred to as a hydrate. This water content by weight can vary, but it is typically fixed. The most well-known hydrates seem to be crystalline solids which decompose once the attached water is removed.
Therefore , The amount of water throughout the compound has been determined by dividing the mass of water wasted mostly by original quantity of hydrate used. The above fraction can be multiplied by 100 to get the hydrate's water content in percentages.
To know more about mass and hydrate.
https://brainly.com/question/11202174
#SPJ3
En una planta de energía, se produce CO2 gracias a la reacción de combustión del material orgánico con oxígeno para producir CO2, SO2, SO3, NO, NO2 y H2O que son los causantes del efecto invernadero, el SO2 reacciona con H2O para formar H2SO3, causante de la lluvia ácida. En condiciones de gas ideal el SO2 se encuentra a una temperatura de 100°C y 0,5 atm de presión, el volumen ocupado generalmente es de 25 L. 5. La ecuación para hallar el número de moles debe ser: a. Gases ideales: relación entre todas las variables que influyen sobre los gases b. Boyle: relación entre volumen y presión c. Charles: relación entre el volumen y la temperatura d. Gay Lussac: relación entre la presión y la temperatura
Answer:
a. Gases ideales: relación entre todas las variables que influyen sobre los gases
Explanation:
La ecuación del gas ideal da la relación entre las variables; presión, volumen, temperatura y número de moles.
Según la ecuación del gas ideal; PV = nRT
P = presión del gas
V = volumen del gas
n = Número de moles del gas
R = constante de gas
T = temperatura del gas
El número de moles de SO2 se obtiene de;
n = PV / RT
n = 0,5 * 25 / 0,082 * 373
n = 12,5 / 30,586
n = 0,41 moles
1.25 x 10^25 atoms of magnesium = ? moles of magnesium
Why would the presence of oxygen bubbles be a good indicator of photosynthesis occurring?
kdjsbjsof in bwjfiejwnjfifihdhwhbsd
how many protons electrons and neutrons does the following isotopes contain 1H+
Answer:
The other name for this isotope is a proton. This is because it contains just a single proton.
Explanation:
H+
Protons = 1
Electrons = 1 - 1 = 0 (The + sign means it has lost a single electron)
Neutrons = 0
Temperature is a measurement of :
1) total energy in a system
2) the average kinetic energy of a system
3) the average potential energy of a system
4) the ability to do work
Answer:
Temperature is a measure of the average kinetic energy of the particles in an object. When temperature increases, the motion of these particles also increases. (That should give you the answer if you read closely first sentence)
2. This chart describes several characteristics of human civilizations.
(6.04)
Characteristics of Human Civilizations
Stable Food Supply
?
Developed Systems of Writing
Which phrase best completes this list?
A. Created militaries
B. Complex social structures
C. Use of fire for protection
D. Declining population
40 points plz help quick!! Order the interactions from strongest to weakest.
1. Covalent Bond
2. Ionic Bond
3. Dipole-Dipole Interactions
4. Hydrogen Bond
5. Dispersion forces
Answer:
2,5,4,1,3
Explanation:
Answer:
Ionic Bond
Explanation:
If magnesium and nickel were used as electrodes to construct an electrochemical cell like the one shown at right, which metal would form the anode and which the cathode?
anode:
cathode:
Answer:
anode: magnesium
cathode: nickel
Explanation:
edg. 2021
What does chemistry mean?
Answer:
The definition of chemistry is a branch of science that deals with the form and properties of matter and substances or the interaction between individuals.
i need help with d and e
Answer:
D: False
E: Ethane
Explanation:
Directions Identify the reactants and product in the following reaction.
4A1+302 → 2A1203
Pls help will give brainlist
Answer:
D. 5
Explanation:
The coefficient will almost always be the whole number in front of the variable.
example
5(x)= 7
The coefficient would be 5.
Can somebody just name all the metalloids, gases, and liquids that are on the periodic table. please this is due in a hour!!!
Answer:
There are six liquid elements present in the periodic table. They are bromine,mercury ,caesium,gallium,rubidium and francium.
The metalloids; boron (B), silicon (Si), germanium (Ge), arsenic (As), antimony (Sb), tellurium (Te), polonium (Po) and astatine (At) are the elements found along the step like line between metals and non-metals of the periodic table.
The gaseous element group; hydrogen (H), nitogen (N), oxygen (O), fluorine (F), chlorine (Cl) and noble gases helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), radon (Rn) are gases at standard temperature and pressure (STP).
Explanation:
How many grams are found from 2 moles of glucose C6H1206?
Answer:
360g
Explanation:
Hope it helps you!
list 2 ways mechanical energy can be transformed into non-mechanical energy ?
Answer:
One is the classic example of friction. When two surfaces rub together, they generate thermal energy, or heat. This is a transformation of the mechanical kinetic energy of the objects into the thermal non-mechanical energy (which is small-scale kinetic energy).
Mechanical energy can be used to overcome friction or lost in form of heat in machine parts. Friction and heat are two non-mechanical energy.
Transformation of mechanical energy into non mechanical energy
Based on the principle of conservation of energy, energy can neither be created nor destroyed but can be transformed from one form to another.
Two ways mechanical energy can be transformedThe two ways mechanical energy can be transformed include the following;
FrictionHeatMechanical energy can be used to overcome friction or lost in form of heat in machine parts, in this process, the mechanical energy (kinetic energy) would be converted into other forms of energy such as heat.
Learn more about conservation of energy here: https://brainly.com/question/166559
See photo! Calculating mass and percentage yields.
Answer:
see above
Explanation:
check for cfe's
1. A wave has a frequency of 800 Hz and a wavelength of 2000 cm. What speed
is this wave traveling?
Answer:
V=f*(wavelength)
V= (800)(20m)
16000m/s
Explanation:
An alpha particle is composed of He2+ ions?
true or false
Answer: The given statement is False.
Explanation:
Alpha particle is a helium nuclei.
Alpha particles are produced when a larger nuclei decays into smaller nuclei in radioactive decay. Alpha particles have mass number and atomic number as 4 and 2 respectively.
General representation of alpha decay :
[tex]^A_Z\textrm{X}\rightarrow ^{A-4}_{Z-2}\textrm{Y}+^4_2\textrm{He}[/tex]
Thus the given statement that alpha particle is composed of [tex]He^{2+}[/tex] ions is False.
The statement of [tex]\rm He^2^+[/tex] ions has formed the alpha particles is true.
Alpha particles are particles that have been similar to the He-4, with the presence of two protons and two neutrons. The alpha particles have the absence of electrons and have been formed during the alpha decay.
[tex]\rm He^2^+[/tex] has been the ion of He with the positive charge indicating the loss of 2 electrons. Thus, in [tex]\rm He^2^+[/tex], there has been 2 protons, 2 neutrons, and 0 electrons.
The atomic configuration of [tex]\rm He^2^+[/tex]has been similar to the alpha particles. Thus, the statement stating, "the alpha particles to be composed of [tex]\rm He^2^+[/tex]ions " is True.
For more information about the alpha particles, refer to the link:
https://brainly.com/question/1685421
:)
Why is water called.compound
Answer:
because it's composed of two elements, hydrogen and oxygen. water is technically a molecular compound tho, for it has two hydrogens.
True or False; the atomic number always equals the number of protons, neutrons and electrons found in an atom.
"" ANSWER""
Protons are values of atomic numbers that do NOT change, that is, they are located inside the nucleus of the atom, whereas electrons are located in the electrosphere that can gain or lose electrons, the electron has a negative charge and the Proton positive, that is, if in any atom it wins an electron the atom will be negative and if the atom loses it will be positive because we already know that the number of protons does not change. To calculate the number of neutron we have to make the number of rounded atomic mass which becomes mass less the number of protons for example oxygen gas has 8 protons which is the atomic number and has atomic mass 15,999 which rounding up to 16 to find the number of neutrals we do 16-8 = 8 so now we know that oxygen has: 8 protons, 8 electrons and 8 neutrons but the values will not always be the same but the possibility of protons and neutrals having the same value is 75% by my count .
● ○ ● RULES ○ ● ○ ●
Atomic number = number of protons
Atomic mass ROUNDNESS = mass
Number of neutrons = number of protons - mass number
OBSERVATION- EXPLANATION FOR STUDENTS OF 9 YEARS BECAUSE IN THE HIGH SCHOOL UP SOME CHANGES CHANGE.
■■ GOOD STUDIES ■■
Which is a disadvantage of using chemical indicators?
They are expensive to use.
They measure pH directly.
They must be selected for a narrow pH range.
They do not use electricity to operate.
WILL AWARD BRAINLIEST FOR FIRST CORRECT ANSWER!
Answer:
They must be selected for a narrow pH range.
Explanation:
Indicators are compounds that change to a specific colour in a solution within a specific pH range.
The chemical indicators does not give the exact value of pH. They only provide the range of pH. They must be selected for a narrow pH range. The correct option is C.
What is chemical indicator?The acid base indicators or neutralization indicators are substances which are employed for the visual detection of the end point on the basis of their ability to change colour during the pH change that occurs in vicinity of the end point.
The chemical indicators are usually weak organic acids or bases which change colour in characteristic pH ranges. The particular range or interval of pH in which an acid-base indicator changes its colour is known as the colour-change interval.
Methyl orange is a weak base which changes its colour in the pH range 3.1-4.4 being red below pH 3.1 and yellow above pH 4.4.
Thus the correct option is C.
To know more about chemical indicators, visit;
https://brainly.com/question/13748767
#SPJ6
When collecting temperature as a function of time for the reaction of KOH with HCL, which time is most significant
Answer:
At the completion of reaction.
Explanation:
The time when the reaction take places is the most significant time for measuring temperature of the solution because on this time the temperature will decrease or increase. Some reactions releases heat energy upon completion we called them exothermic reactions whereas some absorb heat energy from the surrounding, decreases the temperature which is known as endothermic reaction so measuring temperature at the completion of reaction is the correct time.
what is an epicenter of an earthquake
Answer:
It's the epicenter of an earthquake!
p.s. basically that means it's the center
Answer:
the epicentre of an earthquake is the location directly above the hypocenter the surface of the earth (p.s the hypocenter is the location where an earth quake starts )
Two rocks one weighing 100m and the other weiging 200n are drpped from a 50-m cliff at the same time when both rocks are 10m from the ground and air friction is ignored which is the same
Answer:
Ignore all friction