Answer:
99 L
Explanation:
Step 1: Given data
Moles of nitrogen: 4.4 moles
Step 2: Calculate the volume occupied by 4.4 moles of nitrogen
The volume occupied by a gas depends on other conditions such as pressure (P) and temperature (T). If we have this information, we can calculate the volume of the gas using the ideal gas condition.
P × V = n × R × T
Since the task doesn't inform the conditions, we can assume it is under standard pressure (1 atm) and temperature (273.15 K). At STP, 1 mole of any gas occupies 22.4 L.
4.4 mol × 22.4 L/1 mol = 99 L
Why are weather front boundaries turbulent?
Answer:
Answer Below Hope Its Correct.
Explanation:
A weather front is a transition zone between two different air masses at the Earth's surface. Each air mass has unique temperature and humidity characteristics. Often there is turbulence at a front, which is the borderline where two different air masses come together. The turbulence can cause clouds and storms.
Instead of causing clouds and storms, some fronts just cause a change in temperature. However, some storm fronts start Earth's largest storms. Tropical waves are fronts that develop in the tropical Atlantic Ocean off the coast of Africa. These fronts can develop into tropical storms or hurricanes if conditions allow.
Fronts move across the Earth's surface over multiple days. The direction of movement is often guided by high winds, such as Jet Streams. Landforms like mountains can also change the path of a front.
There are four different types of weather fronts: cold fronts, warm fronts, stationary fronts, and occluded fronts.
Which process takes place in the conversion of iron into steel?
Iron is changed into steel by blowing oxygen through the molten metal from the Blast Furnace. This oxidises the impurities in the molten metal. Carbon is a major impurity in Blast Furnace metal.
Arrange in terms of increasing atomic radius. From smallest to largest.
S, F, Sr, Na, Ga
Answer:
F<S<Na<Ga<Sr
Explanation:
Atomic radius increased from the right of the periodic table to left, and from the top to the down
How do you know a chemical reaction has occurred?
Answer:
To tell if a chemical reaction has occurred look at its color change, temperature change, Precipitate formation, gas production, and light emission.
14
Select the correct answer.
A compound has an empirical formula of CzHs. What is true about this empirical formula?
O A.
It models the structure of the compound.
OB
It shows the ratio of elements in the compound.
O c. It gives the mass of each atom in the compound.
OD.
It indicates the number of atoms in the compound.
OE.
It describes only this one compound.
Reset
Next
Answer:
answer B
It shows the ratio of elements in the compound
Explanation:
Chemical formulas tell you how many atoms of each element are in a compound, and empirical formulas tell you the simplest or most reduced ratio of elements in a compound. If a compound's chemical formula cannot be reduced any more, then the empirical formula is the same as the chemical formula.
The statement which is true about the empirical formula is: It shows the ratio of elements in the compound. The correct option is B.
Empirical formula:
The empirical formula of a compound represents the simplest, most reduced ratio of the elements present in the compound.
The empirical formula represents the simplest whole-number ratio of atoms of each element present in a compound.
It is determined by dividing the subscripts of the compound's molecular formula by their greatest common divisor, which simplifies the ratio to its simplest form.
In the given empirical formula CzHs, "z" and "s" represent the subscripts indicating the number of carbon and hydrogen atoms, respectively.
Thus, the correct option is B.
To know more about Empirical formulas, click here:
https://brainly.com/question/32125056
#SPJ5
8. A train travels at a at a speed of 30 miles per hour if 1 mile = 1.6 kilometers, how fast is the train traveling in kilometers per minute?
A. 0.8 km/min
B. 1.0 km/min
C. 0,4 km/min
D. 0,6 km/min
Answer:
Explanation:
A: 0.8 KM/Min
1.6 x 30 = 48
48/60 = 0.8
8.8 Why do esters with higher molecular mass not have strong fragrances?
Answer:
Basically, fragrances reach other person through sense of smell. So, the strength of the fragrances depends a lot on its evaporation, which is strongly related to the boiling point. Esters with higher molecular weight do not have a strong fragrance because it has a higher boiling point.
The gas phase decomposition of hydrogen peroxide at 400 °C
H2O2(g)H2O(g) + ½ O2(g)
is second order in H2O2 with a rate constant of 0.650 M-1 s-1.
If the initial concentration of H2O2 is 8.00×10-2 M, the concentration of H2O2 will be 1.70×10-2 M after
seconds have passed.
Answer:
t = 71.3 s
Explanation:
Hello there!
In this case, since the second-order integrated law is given by the following equation:
[tex]\frac{1}{[H_2O_2]} =\frac{1}{[H_2O_2]_0}+kt[/tex]
Thus, given the initial and final concentration of hydrogen peroxide and the rate constant, we obtain the following time:
[tex]\frac{1}{[0.0170M]}-\frac{1}{0.0800M}=0.650M^{-1}s^{-1}t\\\\t=\frac{46.32M^{-1}}{0.650M^{-1}s^{-1}} \\\\t=71.3s[/tex]
Best regards!
The force of gravity from Earth to Mars is___
a. less than the force of gravity from Mars to Earth.
b. equal to the force of gravity from Mars to Earth.
less than the force of gravity from mars to earth
How many grams of Mg(NO3), are necessary to
make 1500 mL of a 0.50 M solution?
Answer:
1.1 × 10² g
Explanation:
Step 1: Given data
Concentration of the solution (C): 0.50 M (0.50 mol/L)Volume of solution (V): 1500 mL (1.500 L)Step 2: Calculate the moles of Mg(NO₃)₂ (solute)
Molarity is equal to the moles of solute (n) divided by the liters of solution.
C = n/V
n = C × V
n = 0.50 mol/L × 1.500 L = 0.75 mol
Step 3: Calculate the mass corresponding to 0.75 moles of Mg(NO₃)₂
The molar mass of Mg(NO₃)₂ is 148.3 g/mol.
0.75 mol × 148.3 g/mol = 1.1 × 10² g
Are based on the intrinsic properties of the chemical
Answer:
In materials science, an intrinsic property is independent of how much of a material is present and is independent of the form of the material, e.g., one large piece or a collection of small particles. Intrinsic properties are dependent mainly on the fundamental chemical composition and structure of the material.
Explanation:
mark as brainliest
Which of the following is an example of a physical property?
A- Luminol reacting with blood stains to create a faint light
B- Bleach changing the color of a Ph test strip
C- The thickness of glass shards from a crime scene
D- Heroin turning purple when it is exposed to Marquis reagent
Answer:
The answer is C
Explanation:
It just makes the most sense to me
The air bags in automobiles were once inflated by nitrogen gas generated by the rapid decomposition of
sodium azide, NaN3.
2 NaNz (s) 2 Na (s) + 3 N2 (g)
If an air bag has a volume of 53.4 L and is to be filled with nitrogen gas at a pressure of 1.07 atm and a
temperature of 23.7°C, how many moles of NaNz must decompose? You may assume the Ny behaves as
an ideal gas.
Answer:
1.57 mol NaN₃
Explanation:
2 NaN₃ (s) → 2 Na (s) + 3 N₂ (g)First we use PV=nRT to calculate the number of N₂ moles that need to be produced:
P = 1.07 atmV = 53.4 Ln = ?R = 0.082 atm·L·mol⁻¹·K⁻¹T = 23.7 °C ⇒ 23.7 + 273.16 = 296.86 KInputing the data:
1.07 atm * 53.4 L = n * 0.082 atm·L·mol⁻¹·K⁻¹ * 296.86And solving for n:
n = 2.35 mol N₂Finally we convert N₂ moles into NaN₃ moles, using the stoichiometric coefficients of the balanced reaction:
2.35 mol N₂ * [tex]\frac{2molNaN_3}{3molN_2}[/tex] = 1.57 mol NaN₃Who first proposed the concept of free energy?
a. Gibbs
b. Lavoisier
c. Dalton
d. Hess
Answer:
Hello There!!
Explanation:
The answer is=>a. Gibbs.
hope this helps,have a great day!!
~Pinky~
[tex]\huge{\textbf{\textsf{{\color{navy}{An}}{\purple{sw}}{\pink{er}} {\color{pink}{:}}}}}[/tex]
a. Gibbs
ThanksHow many moles of Mg(OH)2(aq) would be required to neutralize 6.0 mol HCl(aq)?
Answer:
[tex]3.0molMg(OH)_2[/tex]
Explanation:
Hello there!
In this case, for these types of acid-base neutralizations, it is crucial to firstly set up the chemical reaction taking place between the acid and the base; in this case HCl and Mg(OH)2 respectively, whose products are obtained by switching around the anions and cations as shown below:
[tex]HCl(aq)+Mg(OH)_2(aq)\rightarrow MgCl_2(aq)+H_2O(l)[/tex]
Which must be balanced to accurately predict the mole ratio on the reactants side:
[tex]2HCl(aq)+Mg(OH)_2(aq)\rightarrow MgCl_2(aq)+2H_2O(l)[/tex]
Whereas we can see a 2:1 mole ratio of the acid to the base; thus, the moles of Mg(OH) required for the neutralization of 6.0 moles of HCl turn out to be:
[tex]6.0molHCl*\frac{1molMg(OH)_2}{2molHCl} \\\\=3.0molMg(OH)_2[/tex]
Best regards!
What volume would 9.23 moles of oxygen gas occupy at 825 mmHg and 45 C
Answer:
Explain:- 22.4L Imol Page 10 Many gas law problems involve calculating the volume of a gas produced by the reaction of volumes of other gases. The problem solving strategy that we have used throughout your chemistry course is still the same. 10.
The volume would 9.23 moles of oxygen gas occupy at 825 mmHg and 45 C 22.4L.
What is an ideal gas law ?According to the Ideal Gas Law, all gases contain the same number of molecules at the same temperature, pressure, and volume (but not the same mass).
When the temperature and pressure are close to the point of transforming into a liquid or solid, the Ideal Gas law does not apply.
There are four governing assumptions for a gas to be "ideal": The volume of the gas particles is insignificant. The gas particles are all the same size and have no intermolecular forces with one another. According to Newton's Laws of Motion, the gas particles move at random.
Given :
Volume = ?
Number of moles = 9.23 moles
Temperature = 318K
Pressure = 825 mmHg = 1.08 atm
By an ideal gas equation
PV = nRT
V = nRT/ P
= 9.23 × 0.0821 × 318 / 1.08
= 22.4L
Thus, The volume would 9.23 moles of oxygen gas occupy at 825 mmHg and 45 C is 22.4L.
To learn more about an ideal gas law, follow the link;
https://brainly.com/question/28257995
#SPJ6
Methane (CH4) undergoes combustion. Which products form? please help will give brainliest if correct
Answer:
B. CO₂ and H₂O.
Explanation:
When any organic substance undergoes complete combustion, it produces carbon dioxide (CO₂) and water (H₂O).
In the case of methane, the balanced reaction is:
CH₄ + 2O₂ → CO₂ + 2H₂OWith the above information in mind the correct answer is option B. CO₂ and H₂O.
When the combustion is incomplete, carbon monoxide (CO) is produced as well.
Answer:
B. CO₂ and H₂O!
When is energy released during a chemical reaction?
A. when chemical bonds break and form
B. when chemical bonds form
C. when chemical bonds break
“Don’t click links if answers have one!”
Of the 8 planets, why does the sun have the most gravitational attraction to Mercury?
Answer:
It is the closest sir.
Have an amazing day and enjoy. P.S Good luck!
Explanation:
Let's chek the orders where mercury and rest planets present
MercuryVenusEarthMarsJupiterSaturnUranusNeptuneMercury is closest to sun so gravitational force is most
Given [H3O+] = 3.06x10-10 M, find the [OH-].
Show your calculation for full credit
Answer:
3.27*(10^-5) M
Explanation:
For 25°C:
[H3O+] *[OH-] =(10^-14)-->
[OH-]=(10^-14)/[H3O+]-->
[OH-]=(10^-14)/(3.06*10^-10)-->
[OH-]=3.27*(10^-5) M
Using standard heats of formation, calculate the standard enthalpy change for the following reaction.
4HCl(g) + O2(g)—>2H2O(g) + 2Cl2(g)
Answer:
ΔH°r = -114.40 kJ
Explanation:
Let's consider the following balanced equation.
4 HCl(g) + O₂(g) ⇒ 2 H₂O(g) + 2 Cl₂(g)
We can calculate the standard enthalpy change of the reaction (ΔH°r) using the following expression.
ΔH°r = ∑np × ΔH°f(p) - ∑nr × ΔH°f(r)
where
ΔH°f: standard heat of formation n: moles p: products r: reactantsΔH°r = 2 mol × ΔH°f(H₂O(g)) + 2 mol × ΔH°f(Cl₂(g)) - 4 mol × ΔH°f(HCl(g)) - 1 mol × ΔH°f(O₂(g))
ΔH°r = 2 mol × (-241.82 kJ/mol) + 2 mol × 0 kJ/mol - 4 mol × (-92.31 kJ/mol) - 1 mol × 0 kJ/mol
ΔH°r = -114.40 kJ
Write the chemical symbols for three different atomic cations that all have 14 protons.
Explanation:
The symbols for three different cations with 14 protons are Si²⁺, Si⁴⁺, and Si³⁺. An element with 14 protons must be silicon, Si. Its electron configuration is [Ne] 3s²3p², so it could lose up to four valence electrons. The most likely cations are Si²⁺, Si⁴⁺, and Si³⁺ (or Si⁺)
1
Select the correct answer.
How long is the term of a federal judge in a constitutional court?
OA.
two years
OB
four years
Ос.
six years
OD.
lifetime
Answer:
Judges and justices serve no fixed term — they serve until their death, retirement, or conviction by the Senate. By design, this insulates them from the temporary passions of the public, and allows them to apply the law with only justice in mind, and not electoral or political concerns.
Help please science questions
It’s for 20 points
Answer:
1 , 2 , 3
Explanation:
Answer
Contributed by Paul Flowers, Klaus Theopold & Richard Langley et al.
General Chemistry at OpenStax CNX
Learning Objectives
Outline the general approach for the isolation of transition metals from natural sources
Describe typical physical and chemical properties of the transition metals
Identify simple compound classes for transition metals and describe their chemical properties
We have daily contact with many transition metals. Iron occurs everywhere—from the rings in your spiral notebook and the cutlery in your kitchen to automobiles, ships, buildings, and in the hemoglobin in your blood. Titanium is useful in the manufacture of lightweight, durable products such as bicycle frames, artificial hips, and jewelry. Chromium is useful as a protective plating on plumbing fixtures and automotive detailing.
If a drum skin vibrates with a frequency of 100 Hz, how many times does it move up and down each second?
( Chemistry )
Which element is similar to the properties bromine?
Answer: Fluorine
Explanation: It belongs in the same group as Bromine
An unknown aqueous metal analysis yielded a detector response of 0.255. When 1.00 mL of a solution containing 100.0 ppm of the metal was mixed with 99.0 mL of the unknown, the detector signal increased to 0.502. Calculate the concentration of the metal in the unknown solution. Report your answer in ppm
Answer:
1.022ppm is the unknown concentration of the metal
Explanation:
Based on Lambert-Beer law, the increasing in signal of a detector is directly proportional to its concentration.
The unknown concentration (X) produces a signal of 0.255
99mL * X + 1mL * 100ppm / 100mL produces a signal of 0.502
0.99X + 1ppm produce 0.502, thus, X is:
0.255 * (0.99X + 1 / 0.502) =
X = 0.503X + 0.508
0.497X = 0.508
X =
1.022ppm is the unknown concentration of the metal
What are the organisms that swim in the upper region of the open ocean?
Answer:
Epipelagic (sunlight)
Explanation:
Examples of organisms living in this zone are plankton, floating seaweed, jellyfish, tuna, many sharks, and dolphins.
Choose the options below that are true of chemical equilibria.
A. The reaction proceeds in the forward and reverse directions at the same rate.
B. Both the forward and the reverse reactions are achievable.
C. The relative amounts of all species must be different.
D. There is no net change in concentrations of reactants and products.
Answer:
A. The reaction proceeds in the forward and reverse directions at the same rate.
B. Both the forward and the reverse reactions are achievable.
D. There is no net change in concentrations of reactants and products.
Explanation:
Chemical equilibrium can be defined as the state of a reversible reaction in which the concentration (rate) of the forward reaction is equal to the concentration (rate) of the backward or reverse reaction. Thus, both the reactants and products of the chemical equation don't have the tendency to change with respect to time.
Hence, the options that are true of chemical equilibria include the following;
I. The reaction moves in both forward and reverse directions simultaneously i.e at the same rate.
II. The chemical equation can attain both forward and reverse reactions.
III. The concentrations of both reactants and products are the same i.e there's no net change.
Answer:
A B D knewton
Explanation:
Lenses are made to have different focal points. What two properties of a lens
affect the focal length?
A. Where the object is located
O B. Whether the image is virtual or real
O C. The material the lens is made from
O D. The centers of curvature of the two sides of the lens