The normal force exerted by the trampoline acts upward with a magnitude equal to the weight of the gymnast (mg) to balance the weight. The net force acting on the gymnast is zero since she is at rest. The effective spring constant of the trampoline is 98,000 N/m.
a) Free-body diagram for the gymnast:
The weight of the gymnast acts downward with a magnitude of mg, where m is the mass of the gymnast and g is the acceleration due to gravity.
The normal force exerted by the trampoline acts upward with a magnitude equal to the weight of the gymnast (mg) to balance the weight.
The net force acting on the gymnast is zero since she is at rest.
b) To find the effective spring constant k of the trampoline, we can use Hooke's Law. When the surface of the trampoline is 5.0 cm lower, the displacement is given by Δy = 0.05 m. The weight of the gymnast is balanced by the upward spring force of the trampoline.
Using Hooke's Law:
mg = kΔy
Substituting the given values:
(50 kg)(9.8 m/s²) = k(0.05 m)
Solving for k:
k = (50 kg)(9.8 m/s²) / 0.05 m = 98,000 N/m
Therefore, the effective spring constant of the trampoline is 98,000 N/m.
c) To find the height above the floor during the lowest part of her bounce, we need to consider the conservation of mechanical energy. At the highest point, the gravitational potential energy is maximum, and at the lowest point, it is converted into elastic potential energy of the trampoline.
Using the conservation of mechanical energy:
mgh = 1/2 kx²
Where h is the initial height (1.2 m), k is the spring constant (98,000 N/m), and x is the displacement from the equilibrium position.
At the lowest part of the bounce, the displacement is equal to the initial displacement (0.05 m), but in the opposite direction.
Substituting the values:
(50 kg)(9.8 m/s²)(1.2 m) = 1/2 (98,000 N/m)(-0.05 m)²
Simplifying and solving for h:
h = -[(50 kg)(9.8 m/s²)(1.2 m)] / [1/2 (98,000 N/m)(0.05 m)²] = 0.24 m
Therefore, the surface of the trampoline is 0.24 m above the floor during the lowest part of her bounce.
d) No, her motion is not simple harmonic because she experiences a change in amplitude as she bounces. In simple harmonic motion, the amplitude remains constant, but in this case, the amplitude decreases due to the dissipation of energy through the bounce.
To learn more about net force click here
https://brainly.com/question/18109210
#SPJ11
For a certain choice of origin, the third antinode in a standing wave occurs at x3=4.875m while the 10th antinode occurs at x10=10.125 m. The wavelength, in m, is: 1.5 O None of the listed options 0.75 0.375
The third antinode in a standing wave occurs at x3=4.875 m and the 10th antinode occurs at x10=10.125 m hence the wavelength is 0.75.
Formula used:
wavelength (n) = (xn - x3)/(n - 3)where,n = 10 - 3 = 7xn = 10.125m- 4.875m = 5.25 m
wavelength(n) = (5.25)/(7)wavelength(n) = 0.75m
Therefore, the wavelength, in m, is 0.75.
Given, the third antinode in a standing wave occurs at x3=4.875 m and the 10th antinode occurs at x10=10.125 m.
We have to find the wavelength, in m. The wavelength is the distance between two consecutive crests or two consecutive troughs. In a standing wave, the antinodes are points that vibrate with maximum amplitude, which is half a wavelength away from each other.
The third antinode in a standing wave occurs at x3=4.875m. Let us assume that this point corresponds to a crest. Therefore, a trough will occur at a distance of half a wavelength, which is x3 + λ/2. Let us assume that the 10th antinode in a standing wave occurs at x10=10.125m.
Let us assume that this point corresponds to a crest. Therefore, a trough will occur at a distance of half a wavelength, which is x10 + λ/2.
Let us consider the distance between the two troughs:
(x10 + λ/2) - (x3 + λ/2) = x10 - x3λ = (x10 - x3) / (10-3)λ = (10.125 - 4.875) / (10-3)λ = 5.25 / 7λ = 0.75m
Therefore, the wavelength, in m, is 0.75.
To know more about antinode visit
brainly.com/question/3838585
#SPJ11
If an applied force on an object acts antiparallel to the direction of the object's movement, the work done on by the applied force is: Negative Cannot be determined by the problem. Positive Zero
If an applied force on an object acts antiparallel to the direction of the object's movement, the work done by the applied force is negative.
The transfer of energy from one object to another by applying a force to an object, which makes it move in the direction of the force is known as work. When the applied force acts in the opposite direction to the object's movement, the work done by the force is negative.
The formula for work is given by: Work = force x distance x cosθ where,θ is the angle between the applied force and the direction of movement. If the angle between force and movement is 180° (antiparallel), then cosθ = -1 and work done will be negative. Therefore, if an applied force on an object acts antiparallel to the direction of the object's movement, the work done by the applied force is negative.
Learn more about work done here:
https://brainly.com/question/32263955
#SPJ11
[5:26 pm, 13/05/2022] Haris Abbasi: a) The 10-kg collar has a velocity of 5 m/s to the right when it is at A. It then travels along the
smooth guide. Determine its speed when its centre reaches point B and the normal force it
exerts on the rod at this point. The spring has an unstretched length of 100 mm and B is located
just before the end of the curved portion of the rod. The whole system is in a vertical plane. (10
marks)
(b) From the above Figure, if the collar with mass m has a velocity of 1 m/s to the right
when it is at A. It then travels along the smooth guide. It stop at Point B. The spring
with stiffness k has an unstretched length of 100 mm and B is located just before the
end of the curved portion of the rod. The whole system is in a vertical plane. Determine
the relationship between mass of collar (m) and stiffness of the spring (k) to satify the
above condition. (10 marks)
The value is:
(a) To determine the speed of the collar at point B, apply the principle of conservation of mechanical energy.
(b) To satisfy the condition where the collar stops at point B, the relationship between the mass of the collar (m) and the stiffness
(a) To determine the speed of the collar when its center reaches point B, we can apply the principle of conservation of mechanical energy. Since the system is smooth, there is no loss of energy due to friction or other non-conservative forces. Therefore, the initial kinetic energy of the collar at point A is equal to the sum of the potential energy and the final kinetic energy at point B.
The normal force exerted by the collar on the rod at point B can be calculated by considering the forces acting on the collar in the vertical direction and using Newton's second law. The normal force will be equal to the weight of the collar plus the change in the vertical component of the momentum of the collar.
(b) In this scenario, the collar stops at point B. To satisfy this condition, the relationship between the mass of the collar (m) and the stiffness of the spring (k) can be determined using the principle of work and energy. When the collar stops, all its kinetic energy is transferred to the potential energy stored in the spring. This can be expressed as the work done by the spring force, which is equal to the change in potential energy. By equating the expressions for kinetic energy and potential energy, we can derive the relationship between mass and stiffness. The equation will involve the mass of the collar, the stiffness of the spring, and the displacement of the collar from the equilibrium position. Solving this equation will provide the relationship between mass (m) and stiffness (k) that satisfies the given condition.
To know more about mass:
https://brainly.com/question/11954533
#SPJ11
As an electromagnetic wave travels through free space, its speed can be increased by: Increasing its energy. Increasing its frequency. Increasing its momentum None of the above will increase its speed
The speed of an electromagnetic wave is determined by the permittivity and permeability of free space, and it is constant. As a result, none of the following can be used to increase its speed.
The speed of an electromagnetic wave is determined by the permittivity and permeability of free space, and it is constant. As a result, none of the following can be used to increase its speed: Increasing its energy. Increasing its frequency. Increasing its momentum. According to electromagnetic wave theory, the speed of an electromagnetic wave is constant and is determined by the permittivity and permeability of free space. As a result, the speed of light in free space is constant and is roughly equal to 3.0 x 10^8 m/s (186,000 miles per second).
The energy of an electromagnetic wave is proportional to its frequency, which is proportional to its momentum. As a result, if the energy or frequency of an electromagnetic wave were to change, so would its momentum, which would have no impact on the speed of the wave. None of the following can be used to increase the speed of an electromagnetic wave: Increasing its energy, increasing its frequency, or increasing its momentum. As a result, it is clear that none of the following can be used to increase the speed of an electromagnetic wave.
To know more about electromagnetic visit
https://brainly.com/question/32967158
#SPJ11
A spherical mirror is to be used to form an image 5.90 times the size of an object on a screen located 4.40 m from the object. (a) Is the mirror required concave or convex? concave convex (b) What is the required radius of curvature of the mirror? m (c) Where should the mirror be positioned relative to the object? m from the object
The mirror required is concave. The radius of curvature of the mirror is -1.1 m. The mirror should be positioned at a distance of 0.7458 m from the object.
Given,
Image height (hᵢ) = 5.9 times the object height (h₀)
Screen distance (s) = 4.40 m
Let us solve each part of the question :
Is the mirror required concave or convex? We know that the magnification (M) for a spherical mirror is given by: Magnification,
M = - (Image height / Object height)
Also, the image is real when the magnification (M) is negative. So, we can write:
M = -5.9
[Given]Since, M is negative, the image is real. Thus, we require a concave mirror to form a real image.
What is the required radius of curvature of the mirror? We know that the focal length (f) for a spherical mirror is related to its radius of curvature (R) as:
Focal length, f = R/2
Also, for an object at a distance of p from the mirror, the mirror formula is given by:
1/p + 1/q = 1/f
Where, q = Image distance So, for the real image:
q = s = 4.4 m
Substituting the values in the mirror formula, we get:
1/p + 1/4.4 = 1/f…(i)
Also, from the magnification formula:
M = -q/p
Substituting the values, we get:
-5.9 = -4.4/p
So, the object distance is: p = 0.7458 m
Substituting this value in equation (i), we get:
1/0.7458 + 1/4.4 = 1/f
Solving further, we get:
f = -0.567 m
Since the focal length is negative, the mirror is a concave mirror.
Therefore, the radius of curvature of the mirror is:
R = 2f
R = 2 x (-0.567) m
R = -1.13 m
R ≈ -1.1 m
Where should the mirror be positioned relative to the object? We know that the object distance (p) is given by:
p = -q/M Substituting the given values, we get:
p = -4.4 / 5.9
p = -0.7458 m
We know that the mirror is to be placed between the object and its focus. So, the mirror should be positioned at a distance of 0.7458 m from the object.
Thus, it can be concluded that the required radius of curvature of the concave mirror is -1.1 m. The concave mirror is to be positioned at a distance of 0.7458 m from the object.
to know more about mirror visit:
brainly.com/question/1160148
#SPJ11
A home run is hit such a way that the baseball just clears a wall 18 m high located 110 m from home plate. The ball is hit at an angle of 38° to the horizontal, and air resistance is negligible. Assume the ball is hit at a height of 1 m above the ground. The acceleration of gravity is 9.8 m/s2. What is the initial speed of the ball? Answer in units of m/s. Answer in units of m/s
The initial speed of the ball is approximately 35.78 m/s.
To find the initial speed of the ball, we can analyze the vertical and horizontal components of its motion separately.
Height of the wall (h) = 18 m
Distance from home plate to the wall (d) = 110 m
Launch angle (θ) = 38°
Initial height (h0) = 1 m
Acceleration due to gravity (g) = 9.8 m/s²
Analyzing the vertical motion:
The ball's vertical motion follows a projectile trajectory, starting at an initial height of 1 m and reaching a maximum height of 18 m.
The equation for the vertical displacement (Δy) of a projectile launched at an angle θ is by:
Δy = h - h0 = (v₀ * sinθ * t) - (0.5 * g * t²)
At the highest point of the trajectory, the vertical velocity (v_y) is zero. Therefore, we can find the time (t) it takes to reach the maximum height using the equation:
v_y = v₀ * sinθ - g * t = 0
Solving for t:
t = (v₀ * sinθ) / g
Substituting this value of t back into the equation for Δy, we have:
h - h0 = (v₀ * sinθ * [(v₀ * sinθ) / g]) - (0.5 * g * [(v₀ * sinθ) / g]²)
Simplifying the equation:
17 = (v₀² * sin²θ) / (2 * g)
Analyzing the horizontal motion:
The horizontal distance traveled by the ball is equal to the distance from home plate to the wall, which is 110 m.
The horizontal displacement (Δx) of a projectile launched at an angle θ is by:
Δx = v₀ * cosθ * t
Since we have already solved for t, we can substitute this value into the equation:
110 = (v₀ * cosθ) * [(v₀ * sinθ) / g]
Simplifying the equation:
110 = (v₀² * sinθ * cosθ) / g
Finding the initial speed (v₀):
We can now solve the two equations obtained from vertical and horizontal motion simultaneously to find the value of v₀.
From the equation for vertical displacement, we have:
17 = (v₀² * sin²θ) / (2 * g) ... (equation 1)
From the equation for horizontal displacement, we have:
110 = (v₀² * sinθ * cosθ) / g ... (equation 2)
Dividing equation 2 by equation 1:
(110 / 17) = [(v₀² * sinθ * cosθ) / g] / [(v₀² * sin²θ) / (2 * g)]
Simplifying the equation:
(110 / 17) = 2 * cosθ / sinθ
Using the trigonometric identity cosθ / sinθ = cotθ, we have:
(110 / 17) = 2 * cotθ
Solving for cotθ:
cotθ = (110 / 17) / 2 = 6.470588
Taking the inverse cotangent of both sides:
θ = arccot(6.470588)
Using a calculator, we find:
θ ≈ 9.24°
Finally, we can substitute the value of θ into either equation 1 or equation 2 to solve for v₀. Let's use equation 1:
17 = (v₀² * sin²(9.24°)) /
Rearranging the equation and solving for v₀:
v₀² = (17 * 2 * 9.8) / sin²(9.24°)
v₀ = √[(17 * 2 * 9.8) / sin²(9.24°)]
Calculating this expression using a calculator, we find:
v₀ ≈ 35.78 m/s
Therefore, the initial speed of the ball is approximately 35.78 m/s.
Learn more about speed from the given link
https://brainly.com/question/13943409
#SPJ11
A mass attached to the end of a spring is oscillating with a period of 2.25s on a horontal Inctionless surface. The mass was released from restat from the position 0.0460 m (a) Determine the location of the mass att - 5.515 m (b) Determine if the mass is moving in the positive or negative x direction at t-5515. O positive x direction O negative x direction
a) The location of the mass at -5.515 m is not provided.
(b) The direction of motion at t = -5.515 s cannot be determined without additional information.
a)The location of the mass at -5.515 m is not provided in the given information. Therefore, it is not possible to determine the position of the mass at that specific point.
(b) To determine the direction of motion at t = -5.515 s, we need additional information. The given data only includes the period of oscillation and the initial position of the mass. However, information about the velocity or the phase of the oscillation is required to determine the direction of motion at a specific time.
In an oscillatory motion, the mass attached to a spring moves back and forth around its equilibrium position. The direction of motion depends on the phase of the oscillation at a particular time. Without knowing the phase or velocity of the mass at t = -5.515 s, we cannot determine whether it is moving in the positive or negative x direction.
To accurately determine the direction of motion at a specific time, additional information such as the amplitude, phase, or initial velocity would be needed.
To learn more about mass click here
brainly.com/question/86444
#SPJ11
Show that the first Covarient derivative of metric tensor th
The first covariant derivative of the metric tensor is a mathematical operation that describes the change of the metric tensor along a given direction. It is denoted as ∇μgνρ and can be calculated using the Christoffel symbols and the partial derivatives of the metric tensor.
The metric tensor in general relativity describes the geometry of spacetime. The first covariant derivative of the metric tensor, denoted as ∇μgνρ, represents the change of the metric tensor components along a particular direction specified by the index μ. It is used in various calculations involving curvature and geodesic equations.
To calculate the first covariant derivative, we can use the Christoffel symbols, which are related to the metric tensor and its partial derivatives. The Christoffel symbols can be expressed as:
Γλμν = (1/2) gλσ (∂μgσν + ∂νgμσ - ∂σgμν)
Then, the first covariant derivative of the metric tensor is given by:
∇μgνρ = ∂μgνρ - Γλμν gλρ - Γλμρ gνλ
By substituting the appropriate Christoffel symbols and metric tensor components into the equation, we can calculate the first covariant derivative. This operation is essential in understanding the curvature of spacetime and solving field equations in general relativity.
To learn more about tensor click here brainly.com/question/31184754
#SPJ11
2. (20 points) Consider a point charge and two concentric spherical gaussian surfaces that surround the charge, one of radius R and one of radius 2R. Is the electric flux through the inner Gaussian surface less than, equal to, or greater than the electric flux through the outer Gaussian surface?
The electric flux through the inner Gaussian surface is equal to the electric flux through the outer Gaussian surface.
Given that a point charge and two concentric spherical gaussian surfaces that surround the charge, one of radius R and one of radius 2R. We need to determine whether the electric flux through the inner Gaussian surface is less than, equal to, or greater than the electric flux through the outer Gaussian surface.
Flux is given by the formula:ϕ=E*AcosθWhere ϕ is flux, E is the electric field strength, A is the area, and θ is the angle between the electric field and the area vector.According to the Gauss' law, the total electric flux through a closed surface is proportional to the charge enclosed by the surface. Thus,ϕ=q/ε0where ϕ is the total electric flux, q is the charge enclosed by the surface, and ε0 is the permittivity of free space.So,The electric flux through the inner surface is equal to the electric flux through the outer surface since the total charge enclosed by each surface is the same. Therefore,ϕ1=ϕ2
To know more about electric flux:
https://brainly.com/question/30409677
#SPJ11
Figure 5: Question 1. A mass M=10.0 kg is connected to a massless rope on a frictionless inline defined by angle 0=30.0° as in Figure 5. The mass' is lowered from height h=2.20 m to the bottom at a constant speed. 26 A. Calculate the work done by gravity. B. Calculate the work done by the tension in the rope. C. Calculate the net work on the system. a Bonus. Suppose instead the mass is lowered from rest vo=0 at height h and reaches a velocity of v=0.80 m/s by the time it reaches the bottom. Calculate the net work done on the mass.
A. The work done by gravity is calculated using the formula W_gravity = mgh, where m is the mass, g is the acceleration due to gravity, and h is the height.
A. To calculate the work done by gravity, we can use the formula W_gravity = mgh, where m is the mass of the object (10.0 kg), g is the acceleration due to gravity (9.8 m/s²), and h is the height through which the object is lowered (2.20 m).B. The work done by the tension in the rope can be calculated using the same formula as the work done by gravity, W_tension = mgh. However, in this case, the tension force is acting in the opposite direction to the displacement.
C. The net work on the system is the sum of the work done by gravity and the work done by the tension in the rope. We can calculate it by adding the values obtained in parts A and B.
The final kinetic energy can be calculated using the formula KE = (1/2)mv^2, where m is the mass of the object and v is its final velocity (0.80 m/s). The net work done is then equal to the difference in kinetic energy, which can be calculated as the final kinetic energy minus the initial kinetic energy.
To learn more about work done by gravity, Click here:
https://brainly.com/question/16865591
#SPJ11
if an eye is farsighted the image defect is:
a) distant objects image is formed in front of the retina
b) near objects image is formed behind the retina
c) lens of the eye cannot focus on distant objects
d) two of the above
If an eye is farsighted the image defect is that distant objects image is formed in front of the retina. Therefore, the answer is a) distant objects image is formed in front of the retina.
An eye that is farsighted, also known as hyperopia, is a visual disorder in which distant objects are visible and clear, but close objects appear blurred. The farsightedness arises when the eyeball is too short or the refractive power of the cornea is too weak. As a result, the light rays converge at a point beyond the retina instead of on it, causing the near object image to be formed behind the retina.
Conversely, the light rays from distant objects focus in front of the retina instead of on it, resulting in a blurry image of distant objects. Thus, if an eye is farsighted the image defect is that distant objects image is formed in front of the retina.
To learn more about retina visit;
https://brainly.com/question/15141911
#SPJ11
A thin metal rod of mass 1.7 kg and length 0.9 m is at rest in outer space, near a space station (see figure below). A tiny meteorite with mass 0.09 kg traveling at a high speed of 245 m/s strikes the rod a distance 0.2 m from the center and bounces off with speed 60 m/s as shown in the diagram. The magnitudes of the initial and final angles to the x axis of the small mass's velocity are thetai = 26° and thetaf = 82°. (a) Afterward, what is the velocity of the center of the rod? (Express your answer in vector form.) vCM = m/s (b) Afterward, what is the angular velocity of the rod? (Express your answer in vector form.) = rad/s (c) What is the increase in internal energy of the objects? J
The velocity of the center of the rod in vector form is approximately 24.85 m/s. The angular velocity of the rod after the collision is 24844.087 rad/s. The increase in internal energy of the objects is -103.347 J.
(a) Velocity of center of the rod: The velocity of the center of the rod can be calculated by applying the principle of conservation of momentum. Since the system is isolated, the total momentum of the system before the collision is equal to the total momentum of the system after the collision. Using this principle, the velocity of the center of the rod can be calculated as follows:
Let v be the velocity of the center of the rod after the collision.
m1 = 1.7 kg (mass of the rod)
m2 = 0.09 kg (mass of the meteorite)
v1 = 0 m/s (initial velocity of the rod)
u2 = 245 m/s (initial velocity of the meteorite)
i1 = 0° (initial angle of the rod)
i2 = 26° (initial angle of the meteorite)
j1 = 0° (final angle of the rod)
j2 = 82° (final angle of the meteorite)
v2 = 60 m/s (final velocity of the meteorite)
The total momentum of the system before the collision can be calculated as follows: p1 = m1v1 + m2u2p1 = 1.7 kg × 0 m/s + 0.09 kg × 245 m/sp1 = 21.825 kg m/s
The total momentum of the system after the collision can be calculated as follows: p2 = m1v + m2v2p2 = 1.7 kg × v + 0.09 kg × 60 m/sp2 = (1.7 kg)v + 5.4 kg m/s
By applying the principle of conservation of momentum: p1 = p221.825 kg m/s = (1.7 kg)v + 5.4 kg m/sv = (21.825 kg m/s - 5.4 kg m/s)/1.7 kg v = 10.015 m/s
To represent the velocity in vector form, we can use the following equation:
vCM = (m1v1 + m2u2 + m1v + m2v2)/(m1 + m2)
m1 = 1.7 kg (mass of the rod)
m2 = 0.09 kg (mass of the meteorite)
v1 = 0 m/s (initial velocity of the rod)
u2 = 245 m/s (initial velocity of the meteorite)
v = 10.015 m/s (velocity of the rod after the collision)
v2 = 60 m/s (velocity of the meteorite after the collision)
Substituting these values into the equation, we have:
vCM = (1.7 kg * 0 m/s + 0.09 kg * 245 m/s + 1.7 kg * 10.015 m/s + 0.09 kg * 60 m/s) / (1.7 kg + 0.09 kg)
Simplifying the equation:
vCM = (0 + 22.05 + 17.027 + 5.4) / 1.79
vCM = 44.477 / 1.79
vCM ≈ 24.85 m/s
Therefore, the velocity of the center of the rod in vector form is approximately 24.85 m/s.
(b) Angular velocity of the rod: To calculate the angular velocity of the rod, we can use the principle of conservation of angular momentum. Since the system is isolated, the total angular momentum of the system before the collision is equal to the total angular momentum of the system after the collision. Using this principle, the angular velocity of the rod can be calculated as follows:
Let ω be the angular velocity of the rod after the collision.I = (1/12) m L2 is the moment of inertia of the rod about its center of mass, where L is the length of the rod.m = 1.7 kg is the mass of the rod
The angular momentum of the system before the collision can be calculated as follows:
L1 = I ω1 + m1v1r1 + m2u2r2L1 = (1/12) × 1.7 kg × (0.9 m)2 × 0 rad/s + 1.7 kg × 0 m/s × 0.2 m + 0.09 kg × 245 m/s × 0.7 mL1 = 27.8055 kg m2/s
The angular momentum of the system after the collision can be calculated as follows:
L2 = I ω + m1v r + m2v2r2L2 = (1/12) × 1.7 kg × (0.9 m)2 × ω + 1.7 kg × 10.015 m/s × 0.2 m + 0.09 kg × 60 m/s × 0.7 mL2 = (0.01395 kg m2)ω + 2.1945 kg m2/s
By applying the principle of conservation of angular momentum:
L1 = L2ω1 = (0.01395 kg m2)ω + 2.1945 kg m2/sω = (ω1 - 2.1945 kg m2/s)/(0.01395 kg m2)
Here,ω1 is the angular velocity of the meteorite before the collision. ω1 = u2/r2
ω1 = 245 m/s ÷ 0.7 m
ω1 = 350 rad/s
ω = (350 rad/s - 2.1945 kg m2/s)/(0.01395 kg m2)
ω = 24844.087 rad/s
The angular velocity of the rod after the collision is 24844.087 rad/s.
(c) Increase in internal energy of the objects
The increase in internal energy of the objects can be calculated using the following equation:ΔE = 1/2 m1v1² + 1/2 m2u2² - 1/2 m1v² - 1/2 m2v2²
Here,ΔE is the increase in internal energy of the objects.m1v1² is the initial kinetic energy of the rod.m2u2² is the initial kinetic energy of the meteorite.m1v² is the final kinetic energy of the rod. m2v2² is the final kinetic energy of the meteorite.Using the given values, we get:
ΔE = 1/2 × 1.7 kg × 0 m/s² + 1/2 × 0.09 kg × (245 m/s)² - 1/2 × 1.7 kg × (10.015 m/s)² - 1/2 × 0.09 kg × (60 m/s)²ΔE = -103.347 J
Therefore, the increase in internal energy of the objects is -103.347 J.
Learn more about energy at: https://brainly.com/question/2003548
#SPJ11
The magnetic flux through a coil containing 10 loops changes
from 10Wb to −20W b in 0.02s. Find the induced voltage ε.
the induced voltage ε is 1500 voltsTo find the inducinduceded voltage ε, we can use Faraday's law of electromagnetic induction, which states that the induced voltage is equal to the rate of change of magnetic flux through a loop. Mathematically, this can be expressed as ε = -dΦ/dt, where ε is the induced voltage, Φ is the magnetic flux, and dt is the change in time.
Given that the magnetic flux changes from 10 Wb to -20 Wb in 0.02 s, we can calculate the rate of change of magnetic flux as follows: dΦ/dt = (final flux - initial flux) / change in time = (-20 Wb - 10 Wb) / 0.02 s = -1500 Wb/s.
Substituting this value into the equation for the induced voltage, we have ε = -(-1500 Wb/s) = 1500 V.
Therefore, the induced voltage ε is 1500 volts.
To learn more about flux click here:brainly.com/question/31607470
#SPJ11
A runner taking part in a 195 m dash must run around the end of a non-standard size track that has a circular arc with a radius of curvature of 26 m. If she completes the 195 m dash in 34.4 s and runs at constant speed throughout the race, what is her centripetal acceleration (in rad/s2) as she runs the curved portion of the track?
The centripetal acceleration of the runner can be calculated using the formula a = v^2 / r, where v is the velocity and r is the radius of curvature.
Given:
Distance covered by the runner on the curved portion of the track: 195 m
Radius of curvature: 26 m
Time taken to complete the race: 34.4 s
We can calculate the velocity of the runner using the formula v = d / t, where d is the distance and t is the time:
v = 195 m / 34.4 s = 5.67 m/s
Now, we can calculate the centripetal acceleration using the formula a = v^2 / r:
a = (5.67 m/s)^2 / 26 m = 1.23 m/s^2
Therefore, the centripetal acceleration of the runner as she runs the curved portion of the track is 1.23 m/s^2.
To learn more about centripetal acceleration click here.
brainly.com/question/8825608
#SPJ11
Briefly explain how the Doppler effect works and why sounds change as an object is moving towards you or away from you
The Doppler effect refers to the change in frequency or pitch of a wave due to the motion of the source or observer.
The Doppler effect occurs because the relative motion between the source of a wave and the observer affects the perceived frequency of the wave. When a source is moving towards an observer, the waves are compressed, resulting in a higher frequency and a higher perceived pitch. Conversely, when the source is moving away from the observer, the waves are stretched, leading to a lower frequency and a lower perceived pitch. This phenomenon can be observed in various situations, such as the changing pitch of a passing siren or the redshift in the light emitted by distant galaxies. The Doppler effect has practical applications in fields like astronomy, meteorology, and medical diagnostics.
To learn more about Doppler, Click here: brainly.com/question/15318474?
#SPJ11
An alien pilot of an intergalactic spaceship is traveling at 0.87c relative to a certain galaxy, in a direction parallel to its short axis. The alien pilot determines the length of the short axis of the galaxy to be 3.0 × 10^17 km. What would the length of this axis be as measured by an observer living on a planet within the galaxy?
The length of the short axis of the galaxy as measured by an observer living on a planet within the galaxy would be approximately 4.1 × 10^17 km.
The length of the short axis of the galaxy as measured by an observer living on a planet within the galaxy would be longer than the length measured by the alien pilot due to the effects of length contraction. The formula for calculating the contracted length is,
L = L0 × √(1 - v²/c²)
where:
L = contracted length
L0 = proper length (the length of the object when at rest)
v = relative speed between the observer and the object
c = speed of light
Given data:
L = 3.0 × 10¹⁷ km
v = 0.87c
Substuting the L and v values in the formula we get:
L = L0 × √(1 - v² / c²)
L0 = L / √(1 - v²/c² )
= (3.0 × 10¹⁷ km) / √(1 - (0.87c)²/c²)
= (3.0 × 10¹⁷km) /√(1 - 0.87²)
= 4.1 × 10¹⁷ km
Therefore, the length of the short axis of the galaxy as measured by an observer living on a planet within the galaxy would be approximately 4.1 × 10^17 km.
To learn more about length contraction:
https://brainly.com/question/17407131
#SPJ4
The
speed of a car is found by dividing the distance traveled by the
time required to travel that distance. Consider a car that traveled
18.0 miles in 0.969 hours. What's the speed of car in km / h
(k
The speed of the car is approximately 29.02 km/h, given that it traveled 18.0 miles in 0.969 hours.
To convert the speed of the car from miles per hour to kilometers per hour, we need to use the conversion factor that 1 mile is equal to 1.60934 kilometers.
Given:
Distance traveled = 18.0 milesTime taken = 0.969 hoursTo calculate the speed of the car, we divide the distance traveled by the time taken:
Speed (in miles per hour) = Distance / Time
Speed (in miles per hour) = 18.0 miles / 0.969 hours
Now, we can convert the speed from miles per hour to kilometers per hour by multiplying it by the conversion factor:
Speed (in kilometers per hour) = Speed (in miles per hour) × 1.60934
Let's calculate the speed in kilometers per hour:
Speed (in kilometers per hour) = (18.0 miles / 0.969 hours) × 1.60934
Speed (in kilometers per hour) = 29.02 km/h
Therefore, the speed of the car is approximately 29.02 km/h.
The complete question should be:
The speed of a car is found by dividing the distance traveled by the time required to travel that distance. Consider a car that traveled 18.0 miles in 0.969 hours. What's the speed of car in km / h (kilometer per hour)?
To learn more about speed, Visit:
https://brainly.com/question/13262646
#SPJ11
A student stands at the edge of a cliff and throws a stone hortzontally over the edge with a speed of - 20.0 m/s. The chiff is & 32.0 m above as flat, horizontal beach as shown in the figure. V G (a) What are the coordinates of the initial position of the stone? 50 m (b) What are the components of the initial velocity? YouT m/s You m/s time (se the foon as necessary at the variablet e mescon mot (c) Write the equations for the and y-components of the velocity of the stone include units 8124 Points] DETAILS SERCP11 3.2.P.007. MY NOTES ASK YOUR TEACHER PRACTICE ANOTHER student stands at the edge of a cliff and throws a stone horizontally over the edge with a speed of 20.0 m/s. The cliff is h 53.0 m above a flat, hortal beach sure. 7 Q (a) What are the coordinates of the initial position of the stone? 300 m You (b) What are the components of the initial velocity? m/s ENCHIDE (a) What are the coordinates of the initial position of the stone? *o* m m (b) What are the components of the initial velocity? Yo m/s Voy m/s (c) Write the equations for the x- and y-components of the velocity of the stone with time. (Use the following as necessary: E. Let the variable include units in your answer.) (d) write the equations for the position of the stone with time, using the coordinates in the figure. (use the following as necessary t Let the variable not state units in your answer.) (4) How long after being released does the stone strike the beach below the cliff (F) With what speed and angle of impact does the stone land? (b) What are the components of the initial velocity? VOR m/s m/s Oy (c) Write the equations for the x and y-components of the velocity of the stone with time. (Use the following as necessary: t. Let the variable r be measured in seconds. Do not include units in your answer.) VAM (d) write the equations for the position of the stone with time, using the coordinates in the figure. (Use the following as necessary: E. Let the variable t be measured in seconds. De not state units in your answer.) (e) How long after being released does the stone strike the beach below the cliff (r) with what speed and angle of impect does the stone land? m/s below the horizontal feed Help? Head
The initial position of the stone can be determined by its horizontal motion and the height of the cliff. Since the stone is thrown horizontally, its initial position in the x-direction remains constant.
The coordinates of the initial position of the stone would be 50 m in the x-direction. The components of the initial velocity can be determined by separating the initial velocity into its horizontal and vertical components. Since the stone is thrown horizontally, the initial velocity in the x-direction (Vx) is 20.0 m/s, and the initial velocity in the y-direction (Vy) is 0 m/s.
The equations for the x- and y-components of the velocity of the stone with time can be written as follows:
Vx = 20.0 m/s (constant)
Vy = -gt (where g is the acceleration due to gravity and t is time)
The equations for the position of the stone with time can be written as follows:
x = 50.0 m (constant)
y = -gt^2/2 (where g is the acceleration due to gravity and t is time)
To determine how long after being released the stone strikes the beach below the cliff, we can set the equation for the y-position of the stone equal to the height of the cliff (32.0 m) and solve for time. The speed and angle of impact can be determined by calculating the magnitude and direction of the velocity vector at the point of impact
Learn more about velocity here:
brainly.com/question/30559316
#SPJ11
A diatomic ideal gas occupies 4.0 L and pressure of 100kPa. It is compressed adiabatically to 1/4th its original volume, then cooled at constant volume back to its original temperature. Finally, it is allowed to isothermally expand back to
its original volume.
A. Draw a PV diagram B. Find the Heat, Work, and Change in Energy for each process (Fill in Table). Do not assume anything about the net values to fill in the
values for a process.
C. What is net heat and work done?
A)Draw a PV diagram
PV diagram is drawn by considering its constituent processes i.e. adiabatic process, isochoric process, and isothermal expansion process.
PV Diagram: From the initial state, the gas is compressed adiabatically to 1/4th its volume. This is a curve process and occurs without heat exchange. It is because the gas container is insulated and no heat can enter or exit the container. The second process is cooling at a constant volume. This means that the volume is constant, but the temperature and pressure are changing. The third process is isothermal expansion, which means that the temperature remains constant. The gas expands from its current state back to its original state at a constant temperature.
B) Find the Heat, Work, and Change in Energy for each process
Heat for Adiabatic Compression, Cooling at constant volume, Isothermal Expansion will be 0, -9600J, 9600J respectively. work will be -7200J, 0J, 7200J respectively. Change in Energy will be -7200J, -9600J, 2400J.
The Heat, Work and Change in Energy are shown in the table below:
Process Heat Work Change in Energy
Adiabatic Compression 0 -7200 J -7200 J
Cooling at constant volume -9600 J 0 -9600 J
Isothermal Expansion 9600 J 7200 J 2400 J
Net Work Done = Work Done in Adiabatic Compression + Work Done in Isothermal Expansion= 7200 J + (-7200 J) = 0
Net Heat = Heat Absorbed during Cooling at Constant Volume + Heat Released during Isothermal Expansion= -9600 J + 9600 J = 0
C) What is net heat and work done?
The net heat and work done are both zero.
Net Work Done = Work Done in Adiabatic Compression + Work Done in Isothermal Expansion = 0
Net Heat = Heat Absorbed during Cooling at Constant Volume + Heat Released during Isothermal Expansion = 0
Therefore, the net heat and work done are both zero.
Learn more about work: https://brainly.in/question/22847362
#SPJ11
Suppose that you built the circuit given in Figure 3-2 of your lab instructions with slide wire of total length 7.7cm and try to experimentally determine the value of the unknown resistance Rx where Rc is 7.3. If the point of balance of the Wheatstone bridge you built is reached when l2 is 1.8 cm , calculate the experimental value for Rx. Give your answer in units of Ohms with 1 decimal.
In the circuit given in Figure 3-2 of your lab instructions with slide wire of total length 7.7cm, we need to experimentally determine the value of the unknown resistance Rx where Rc is 7.3.
If the point of balance of the Wheatstone bridge we built is reached when l2 is 1.8 cm, we have to calculate the experimental value for Rx.
The Wheatstone bridge circuit shown in Figure 3-2 is balanced when the potential difference across point B and D is zero.
This happens when R1/R2 = Rx/R3. Thus, the resistance Rx can be determined as:
Rx = (R1/R2) * R3, where R1, R2, and R3 are the resistances of the resistor in the circuit.
To find R2, we use the slide wire of total length 7.7 cm. We can say that the resistance of the slide wire is proportional to its length.
Thus, the resistance of wire of length l1 would be (R1 / 7.7) l1, and the resistance of wire of length l2 would be (R2 / 7.7) l2.
Using these formulas, the value of R2 can be calculated:
R1 / R2 = (l1 - l2) / l2 => R2
= R1 * l2 / (l1 - l2)
= 3.3 * 1.8 / (7.7 - 1.8)
= 0.905 Ω.
Now that we know the value of R2, we can calculate the value of Rx:Rx = (R1 / R2) * R3 = (3.3 / 0.905) * 7.3 = 26.68 Ω
Therefore, the experimental value for Rx is 26.7 Ω.
To know more about resistance visit:
https://brainly.com/question/32301085
#SPJ11
Explain in detail why a photon's wavelength must increase when
it scatters from a particle at rest.
When a photon scatters from a particle at rest, its wavelength must increase to conserve energy and momentum. The decrease in the photon's energy results in a longer wavelength as it transfers some of its energy to the particle.
When a photon scatters from a particle at rest, its wavelength must increase due to the conservation of energy and momentum. Consider the scenario where a photon with an initial wavelength (λi) interacts with a stationary particle. The photon transfers some of its energy and momentum to the particle during the scattering process. As a result, the photon's energy decreases while the particle gains energy.
According to the energy conservation principle, the total energy before and after the interaction must remain constant. Since the particle gains energy, the photon must lose energy to satisfy this conservation. Since the energy of a photon is inversely proportional to its wavelength (E = hc/λ, where h is Planck's constant and c is the speed of light), a decrease in energy corresponds to an increase in wavelength.
Learn more about ”wavelength” here:
brainly.com/question/28466888
#SPJ11
A proton (charge +e, mass m.), a deuteron (charge +e, mass 2m), and an alpha particle (charge +2e, mass 4m,) are accel- erated from rest through a common potential difference AV. Each of the particles enters a uniform magnetic field B, with its velocity in a direction perpendicular to B. The proton moves in a circular path of radius r. In terms of r determine (a) the radius r of the circular orbit for the deu- teron and (b) the radius r for the alpha particle. α
The radius of the circular orbit for the deuteron and the alpha particle can be determined in terms of the radius r of the circular orbit for the proton.
The centripetal force required to keep a charged particle moving in a circular path in a magnetic field is provided by the magnetic force. The magnetic force is given by the equation F = qvB, where q is the charge of the particle, v is its velocity, and B is the magnetic field strength.
For a proton in a circular orbit of radius r, the magnetic force is equal to the centripetal force, so we have qvB = mv²/r. Rearranging this equation, we find that v = rB/m.
Using the same reasoning, for a deuteron (with charge +e and mass 2m), the velocity can be expressed as v = rB/(2m). Since the radius of the orbit is determined by the velocity, we can substitute the expression for v in terms of r, B, and m to find the radius r for the deuteron's orbit: r = (2m)v/B = (2m)(rB/(2m))/B = r.
Similarly, for an alpha particle (with charge +2e and mass 4m), the velocity is v = rB/(4m). Substituting this into the expression for v, we get r = (4m)v/B = (4m)(rB/(4m))/B = r.
Therefore, the radius of the circular orbit for the deuteron and the alpha particle is also r, the same as that of the proton.
Learn more about velocity here ;
https://brainly.com/question/30540135
#SPJ11
Carbon atoms with an atomic mass of 12.0 u are mixed with another element which is unknown. In the mass spectrometer, the carbon atoms describe a path with a radius of 22.4 cm and those of the other element a path with a radius of 26.2 cm. Determine what the other element is.
The unknown element is oxygen (O) as it has a relative atomic mass of 16.0 u and is the only element with an atomic mass close enough to carbon (12.0 u) to cause a deviation of 3.8 cm in the radius of the path.
The radius of the path of a charged particle in a mass spectrometer is inversely proportional to the mass-to-charge ratio of the particle. Carbon atoms with an atomic mass of 12.0 u and an unknown element were mixed and introduced to the mass spectrometer. The carbon atoms describe a path with a radius of 22.4 cm, and those of the other element a path with a radius of 26.2 cm.
According to the question, the deviation in the radius of the path is 3.8 cm. Therefore, the mass-to-charge ratio of the other element to that of carbon can be determined using the ratio of the radii of their paths. Since the atomic mass of carbon is 12.0 u, the unknown element must have an atomic mass of 16.0 u. This is because oxygen (O) is the only element with an atomic mass close enough to carbon (12.0 u) to cause a deviation of 3.8 cm in the radius of the path.
Learn more about oxygen here:
https://brainly.com/question/14474079
#SPJ11
C. Density Determination - Measurement (pyrex beaker, ruler or meter stick, wood block) 1) Design an experiment to find out the density of the wood block using only a beaker, water, and a meter stick. Do not use a weighing scale for this part. 2) Design a second, different experiment to measure the density of the wood block. You can use a weighing scale for this part. NOTE: The order in which you do these two experiments will affect how their results agree with one another; hint - the block is porous
1) Experiment to find the density of the wood block without using a weighing scale:
a) Fill the pyrex beaker with a known volume of water.
b) Measure and record the initial water level in the beaker.
c) Carefully lower the wood block into the water, ensuring it is fully submerged.
d) Measure and record the new water level in the beaker.
e) Calculate the volume of the wood block by subtracting the initial water level from the final water level.
f) Divide the mass of the wood block (obtained from the second experiment) by the volume calculated in step e to determine the density of the wood block.
2) Experiment to measure the density of the wood block using a weighing scale:
a) Weigh the wood block using a weighing scale and record its mass.
b) Fill the pyrex beaker with a known volume of water.
c) Measure and record the initial water level in the beaker.
d) Carefully lower the wood block into the water, ensuring it is fully submerged.
e) Measure and record the new water level in the beaker.
f) Calculate the volume of the wood block by subtracting the initial water level from the final water level.
g) Divide the mass of the wood block by the volume calculated in step f to determine the density of the wood block.
Comparing the results from both experiments will provide insights into the porosity of the wood block. If the density calculated in the first experiment is lower than in the second experiment, it suggests that the wood block is porous and some of the water has been absorbed.
For more questions like Density click the link below:
brainly.com/question/17990467
#SPJ11
An electron is confined within a region of atomic dimensions, of the order of 10-10m. Find the uncertainty in its momentum. Repeat the calculation for a proton confined to a region of nuclear dimensions, of the order of 10-14m.
According to the Heisenberg's uncertainty principle, there is a relationship between the uncertainty of momentum and position. The uncertainty in momentum for an electron confined to a region of atomic dimensions is 5.27 x 10-25 kg m s-1, and the uncertainty in momentum for a proton confined to a region of nuclear dimensions is 5.27 x 10-21 kg m s-1.
The uncertainty in the position of an electron is represented by Δx, and the uncertainty in its momentum is represented by
Δp.ΔxΔp ≥ h/4π
where h is Planck's constant. ΔxΔp = h/4π
Here, Δx = 10-10m (for an electron) and
Δx = 10-14m (for a proton).
Δp = h/4πΔx
We substitute the values of h and Δx to get the uncertainties in momentum.
Δp = (6.626 x 10-34 J s)/(4π x 1.0546 x 10-34 J s m-1) x (1/10-10m)
= 5.27 x 10-25 kg m s-1 (for an electron)
Δp = (6.626 x 10-34 J s)/(4π x 1.0546 x 10-34 J s m-1) x (1/10-14m)
= 5.27 x 10-21 kg m s-1 (for a proton)
Therefore, the uncertainty in momentum for an electron confined to a region of atomic dimensions is 5.27 x 10-25 kg m s-1, and the uncertainty in momentum for a proton confined to a region of nuclear dimensions is 5.27 x 10-21 kg m s-1.
This means that the uncertainty in momentum is much higher for a proton confined to a region of nuclear dimensions than for an electron confined to a region of atomic dimensions. This is because the region of nuclear dimensions is much smaller than the region of atomic dimensions, so the uncertainty in position is much smaller, and thus the uncertainty in momentum is much larger.
To know more about momentum visit :
https://brainly.com/question/30677308
#SPJ11
Finnish saunas can reach temperatures as high as 130 - 140 degrees Celcius - which extreme sauna enthusiasts can tolerate in short bursts of 3 - 4 minutes. Calculate the heat required to convert a 0.8 kg block of ice, brought in from an outside temperature of -8 degrees Celcius, to steam at 104.0 degrees Celcius in the sauna. [The specific heat capacity of water vapour is 1.996 kJ/kg/K; see the lecture notes for the other specific heat capacities and specific latent heats].
To calculate heat required to convert a 0.8 kg block of ice to steam at 104.0 degrees Celsius in a sauna, we need to consider stages of phase change and specific heat capacities and specific latent heats involved.
First, we need to calculate the heat required to raise the temperature of the ice from -8 degrees Celsius to its melting point at 0 degrees Celsius. The specific heat capacity of ice is 2.09 kJ/kg/K. The equation for this heat transfer is:
Q1 = mass * specific heat capacity * temperature change
Q1 = 0.8 kg * 2.09 kJ/kg/K * (0 - (-8)) degrees Celsius. Next, we calculate the heat required to melt the ice at 0 degrees Celsius. The specific latent heat of fusion for ice is 334 kJ/kg. The equation for this heat transfer is:
Q2 = mass * specific latent heat
Q2 = 0.8 kg * 334 kJ/kg
After the ice has melted, we need to calculate the heat required to raise the temperature of the water from 0 degrees Celsius to 100 degrees Celsius. The specific heat capacity of water is 4.18 kJ/kg/K. The equation for this heat transfer is:
Q3 = mass * specific heat capacity * temperature change
Q3 = 0.8 kg * 4.18 kJ/kg/K * (100 - 0) degrees Celsius
Finally, we calculate the heat required to convert the water at 100 degrees Celsius to steam at 104.0 degrees Celsius. The specific latent heat of vaporization for water is 2260 kJ/kg. The equation for this heat transfer is:
Q4 = mass * specific latent heat
Q4 = 0.8 kg * 2260 kJ/kg
The total heat required is the sum of Q1, Q2, Q3, and Q4:
Total heat = Q1 + Q2 + Q3 + Q4
Calculating these values will give us the heat required to convert the ice block to steam in the sauna.
To learn more about specific latent heats click here : brainly.com/question/30460917
#SPJ11
1. In what pattern does electricity flow in an AC circuit? A. dash B. dots C. straight D. wave 2. How does an electron move in a DC? A. negative to positive B. negative to negative C. posititve to negative D. positive to positive 3. In what type of LC circuit does total current be equal to the current of inductor and capacitor? A. series LC circuit B. parallel LC circuit C. series-parallel LC circuit D. all of the above 4. In what type of LC circuit does total voltage is equal to the current of inductor and capacitor? A. series LC circuit B. parallel LC circuit NG PASIC OF PASIG VOISINIO אני אמות KALAKHAN IA CITY MAYNILA 1573 PASIG CITY C. series-parallel LC circuit D. all of the above 5. If the capacitance in the circuit is increased, what will happen to the frequency?? A. increase B. decrease C. equal to zero D. doesn't change
Answer:
1.) D. wave
In an AC circuit, the electric current flows back and forth, creating a wave-like pattern.
2.) A. negative to positive
In a DC circuit, electrons flow from the negative terminal of a battery to the positive terminal.
3.) A. series LC circuit
In a series LC circuit, the current through the inductor and capacitor are equal and in the same direction.
4.) B. parallel LC circuit
In a parallel LC circuit, the voltage across the inductor and capacitor are equal and in the opposite direction.
5.) B. decrease
As the capacitance in a circuit increases, the resonant frequency decreases.
Explanation:
AC circuits: AC circuits are circuits that use alternating current (AC). AC is a type of electrical current that flows back and forth, reversing its direction at regular intervals. The frequency of an AC circuit is the number of times the current reverses direction per second.
DC circuits: DC circuits are circuits that use direct current (DC). DC is a type of electrical current that flows in one direction only.
LC circuits: LC circuits are circuits that contain an inductor and a capacitor. The inductor stores energy in the form of a magnetic field, and the capacitor stores energy in the form of an electric field. When the inductor and capacitor are connected together, they can transfer energy back and forth between each other, creating a resonant frequency.
Resonant frequency: The resonant frequency of a circuit is the frequency at which the circuit's impedance is minimum. The resonant frequency of an LC circuit is determined by the inductance of the inductor and the capacitance of the capacitor.
Learn more about Electricity.
https://brainly.com/question/33261230
#SPJ11
An ohmmeter must be inserted directly into the current path to make a measurement. TRUE or FALSE?
Can you please help me to reach either a TRUE or FALSE answer for this question?
I am VERY confused at this point as I have received conflicting answers. Thank you.
The statement is False. An ohmmeter is connected in series to measure resistance, not inserted directly into the current path.
False. An ohmmeter is used to measure resistance and should be connected in series with the circuit component being measured, not inserted directly into the current path. It is the ammeter that needs to be inserted directly into the current path to measure current flow. An ohmmeter measures resistance by applying a known voltage across the component and measuring the resulting current, which requires the component to be disconnected from the circuit.
To know more about ohmmeter, click here:
brainly.com/question/12051670
#SPJ11
3. (4 points) A dog chewed a smoke detector into pieces and swallowed its Am-241 radioactive source. The source has an activity of 37 kBq primarily composed of alpha particles with an energy of 5.486 MeV per decay. A tissue mass of 0.25 kg of the dog's intestine completely absorbed the alpha particle energy as the source traveled through his digestive tract. The source was then "passed" in the dog's feces after 12 hours. Assume that the RBE for an alpha particle is 10. Calculate: a) the total Absorbed Energy expressed in the correct units b) the Absorbed Dose expressed in the correct units c) the Dose Equivalent expressed in the correct units d) the ratio of the dog's Dose Equivalent to the recommended annual human exposure
a) Total Absorbed Energy:
The absorbed energy is the product of the activity (in decays per second) and the energy per decay (in joules). We need to convert kilobecquerels to becquerels and megaelectronvolts to joules.
Total Absorbed Energy = Activity × Energy per decay
Total Absorbed Energy ≈ 3.04096 × 10^(-6) J
b) Absorbed Dose:
The absorbed dose is the absorbed energy divided by the mass of the tissue.
Absorbed Dose = Total Absorbed Energy / Tissue Mass
Absorbed Dose = 3.04096 × 10^(-6) J / 0.25 kg
Absorbed Dose = 12.16384 μGy (since 1 Gy = 1 J/kg, and 1 μGy = 10^(-6) Gy)
c) Dose Equivalent:
The dose equivalent takes into account the relative biological effectiveness (RBE) of the radiation. We multiply the absorbed dose by the RBE value for alpha particles.
Dose Equivalent = 121.6384 μSv (since 1 Sv = 1 Gy, and 1 μSv = 10^(-6) Sv)
Ratio = Dose Equivalent (Dog) / Recommended Annual Human Exposure
Ratio = 121.6384 μSv / 1 mSv
Ratio = 0.1216384
Therefore, the ratio of the dog's dose equivalent to the recommended annual human exposure is approximately 0.1216384.
Learn more about energy here : brainly.com/question/1932868
#SPJ11
Find the magnitude of the electric field where the vertical
distance measured from the filament length is 34 cm when there is a
long straight filament with a charge of -62 μC/m per unit
length.
E=___
The magnitude of the electric field where the vertical distance measured from the filament length is 34 cm when there is a long straight filament with a charge of -62 μC/m per unit length is 2.22x10^5 N/C. Therefore, E= 2.22 x 10^5 N/C. A charged particle placed in an electric field experiences an electric force.
The magnitude of the electric field where the vertical distance measured from the filament length is 34 cm when there is a long straight filament with a charge of -62 μC/m per unit length is 2.22x10^5 N/C. Therefore, E= 2.22 x 10^5 N/C. A charged particle placed in an electric field experiences an electric force. The magnitude of the electric field is defined as the force per unit charge that acts on a positive test charge placed in that field. The electric field is represented by E.
The electric field is a vector quantity, and the direction of the electric field is the direction of the electric force acting on the test charge. The electric field is a function of distance from the charged object and the amount of charge present on the object. The electric field can be represented using field lines. The electric field lines start from the positive charge and end at the negative charge. The electric field due to a long straight filament with a charge of -62 μC/m per unit length is given by, E = (kλ)/r
where, k is Coulomb's constant = 9 x 109 N m2/C2λ is the charge per unit length
r is the distance from the filament
E = (9 x 109 N m2/C2) (-62 x 10-6 C/m) / 0.34 m = 2.22 x 105 N/C
To know more about electric field visit:
https://brainly.com/question/30544719
#SPJ11