Answer:
Strong acids are strong electrolytes. Such acids ionize completely.
Weak acids and bases are weak electrolytes. Such bases and acids ionize only to a small extent.
Explanation:
Electrolytes are the substances that produce ions when they are dissolved in water. Electrolytes can be categorized as bases, acids, and salts.
Strong acids are strong electrolytes. Such acids ionize completely.
Weak acids and bases are weak electrolytes. Such bases and acids ionize only to a small extent.
if common names does not exist how would be the world of organic compounds
Explanation:
I think the question is not complete
Briefly describe each of the suns layers. I’ll give brainless
Answer: The inner layers are the Core, Radiative Zone and Convection Zone.
The outer layers are the Photosphere, the Chromosphere, the Transition Region and the Corona.
Nuclear fusion of hydrogen in the core of the Sun produces tremendous amounts of energy that radiate out from the Sun.
The corona is the outermost layer of the Sun, starting at about 1300 miles (2100 km) above the solar surface (the photosphere). The temperature in the corona is 500,000 K (900,000 degrees F, 500,000 degrees C) or more.
The chromosphere is a layer in the Sun between about 250 miles (400 km) and 1300 miles (2100 km) above the solar surface (the photosphere). The temperature in the chromosphere varies between about 4000 K at the bottom (the so-called temperature minimum) and 8000 K at the top (6700 and 14,000 degrees F, 3700 and 7700 degrees C), so in this layer (and higher layers) it actually gets hotter if you go further away from the Sun, unlike in the lower layers, where it gets hotter if you go closer to the center of the Sun.
The photosphere is the deepest layer of the Sun that we can observe directly. It reaches from the surface visible at the center of the solar disk to about 250 miles (400 km) above that. The temperature in the photosphere varies between about 6500 K at the bottom and 4000 K at the top (11,000 and 6700 degrees F, 6200 and 3700 degrees C)
(phew! There you go!)
Can someone plzzzzz helppppp me plzzzzzz( and don’t tell me to click a link it doesn’t work)
Answer: First Scientific method
Second: question
Third: research
Fourth: hypothesis
Fifth: experiment
Sixth: procedure
Seventh: variable
Eighth: observe
Ninth: interpret
Tenth: record
Eleventh: ethical
Twelfth: conclusion
Explanation: That is the order that the words in the box go in. Hope this helps!
Many angiosperms rely on animals for
A fertilization
B pollination
C photosynthesis
D transpiration
Oo help it’s for a grade
Answer: D.kinectic energy
Explanation
1 point
have specific requirements that need to be met in order for an
entrepreneur to be considered.
O Loans
O Investments
O None of the other answers
O Grants
Which is the correct answer?
Which of the following is an example of kinetic energy?
Answer: A river flowing at a certain speed
Explanation: as water has certain velocity and mass.
Р
+
02
=
P4O6
balance the equation
To balance a chemical equation, both sides should have equal mass, or in other words both sides should have same number of atoms as to follow the conservation of mass rule.
P + O₂ = P₄O₆
LHS:
Number of Phosphorus atoms = 1 atom
Number of Oxygen atoms = 2 atoms
RHS:
Number of Phosphorous atoms = 4 atoms
Number of Oxygen atoms = 6 atoms
Also since P₄O₆ has the most number of atoms we will make the LHS equalize to P₄O₆.
Difference between Phosphorous atoms in LHS to RHS = 3
Since phosphorous is a monatomic we need 3 phosphorous atoms extra
Difference between Oxygen atoms is LHS to RHS = 4
But Oxygen is diatomic, so we need 4/2 = 2 Oxygen molecules
Now lets see if it is balanced
P + 3P + O₂ + 2O₂ -------> P₄O₆
4P + 3O₂ ------> P₄O₆
LHS:
Phosphorous atoms = 4 atoms
Oxygen atoms = 3 × 2 = 6 atoms
RHS:
Phosphorous atoms = 4 atoms
Oxygen atoms = 6 atoms
LHS = RHS
Therefore the balanced equation is 4P + 3O₂ = P₄O₆
Happy to help :)
If you need more explanation or help in any other question, feel free to ask
What does it mean to be limiting or excess? (Limiting Reactant)
Answer:
Find the limiting reagent by calculating and comparing the amount of product each reactant will produce. Balance the chemical equation for the chemical reaction. The reactant that produces a lesser amount of product is the limiting reagent. The reactant that produces a larger amount of product is the excess reagent.
Explanation:
The ______ properties of a substance can be observed only when it undergoes a change to become an entirely different kind of substance with different properties.
Enter the answer
Answer:chemical
Explanation:
1. identify a metal that matches each of the following descriptions. There may be more than one possible metal.
a Reacts slowly with cold water to form a hydroxide.
b Does not react with oxygen when heated.
c Reacts slowly with dilute acid.
d Reacts very vigorously in cold water to form hydroxide.
Answer:
I don't think there is any metal matches with this condition
briskly meaning
thankew 人(◕ᴗ◕✿)❤️
to all who liked my answers
plsssssssssss flw
can anyone pls flw me who aren't flwing
plsssssssssss answer fast
Answer:
You need follower?
See it shows this in Laptop
I can't see who I am following it does itself
can someone help me ????
Answer:
B) Lithium
C) Barium
F) Potassium
Explanation:
All of the above are Inorganic Compounds.
Answer:
[tex]\boxed {\boxed {\sf Cobalt, Iron, and \ Copper}}[/tex]
Explanation:
The Stock System states that In a chemical formula or equation, some metals need a roman numeral after their symbol. If a metal has multiple oxidation states, it needs a roman numeral.
Use the Periodic Table to see the oxidation states for each metal.
Cobalt (Co): +3, +2 Lithium (Li): +1 Barium (Ba): +2 Iron (Fe): +3, +2 Copper (Cu): +2, +1 Potassium (K): +1We can see that cobalt, iron, and copper have more than one oxidation state, so they would require a roman numeral.
Give the noble gas configuration of vanadium (V), atomic number 23
The noble gas configuration of vanadium (V), atomic number 23 will be [Ar] 3d34s2.
What is noble gas configuration ?The electron configuration of noble gases would be known as that of the noble gas configuration. The propensity of chemical elements to gain stability forms the foundation of all chemical reactions. Chemical formation frequently leads to an entire electronic configuration approximating a noble gas for several main group elements.
The atomic number of V = 23
The noble gas configuration = [Ar] [tex]3d^{3} 4s^{2}[/tex].
To know more about noble gas configuration
https://brainly.com/question/13933772
#SPJ3
Answer:
[Ar] 3d3 4s2
Explanation:
[Ar] 3d3 4s2
Equimolar solutions of the following were prepared in water separately. Which one of the solution will record the highest pH?
o CaCl2
SrCl 2
Ba(NO 2 )2
MgCl2
Answer:
Ba(NO2)2
Explanation:
Anything that contains calcium comes from a strong acid. Nitrous oxide (NO2) is a weak acid, therefore the salt it makes is less acidic than the rest --> the highest pH :)
1 In what type orbital are the outer electrons of the atoms of the elements of Group 1 (IA) and Group 2 (IIA)?
Answer:
s orbital
Explanation:
The elements of Group 1 (IA) and Group 2 (IIA) have one and two electrons in their outermost shells respectively.
For the elements in group Group 1 (IA), the general outer electron configuration is ns1. This last electron is accommodated within an s orbital.
For the elements in Group 2 (IIA), the two outermost electrons are accommodated in an ns orbital, hence the answer.
For the balanced equation shown below, how many moles of H2O will react with 9 moles of N2?
N2 + 4H2O --> 2H2O2 + N2H4
Answer:
36 mole of H20
Explanation:
N2 + 4H2O --> 2H2O2 + N2H4
H20 : N2
4 : 1
x : 9
cross multiplication
so,
= 9x4/1 = 36 mole of H20
I hope this helps a little bit.
Plants are living organisms that respond to stimuli, use resources for energy, grow and develop, are organized by cells, and reproduce. A. true B. false
Answer:
true
Explanation:
Answer:
b. trueeeeeeeeeeeeeeeeeeeeeeeeeeee
How much energy is released when 67.04g of phosphorous is reacted with 10.20g of chlorine? ___ P + ___ Cl2 ___ PCl3 ΔH = -574 kJ
Answer:
26.78 kJ
Explanation:
To solve the problem, we have to first write the stoichiometric coefficients in the chemical equation:
2P + 3Cl₂ → 2PCl₃
With these coefficients, we have the same number of atoms of each chemical element on both sides: 2 atoms of P, 6 atoms of Cl.
According to the equation, 2 moles of phosphorous (P) react with 3 moles of chlorine (Cl₂), and 574 kJ of energy are released. We have to figure out which is the limiting reactant. For this, we convert the mass into moles by using the molar mass(MM):
MM(P) = 30.9 g/mol
67.04 g P/(30.9 g/mol) = 2.17 mol P
MM(Cl₂) = 35.4 g/mol x 2 = 70.8 g/mol
10.20 g Cl₂/(70.8 g/mol) = 0.14 mol Cl₂
Now, we multiply the actual moles of P (the amount we have for the reaction) by the stoichiometric ratio given by the chemical equation (3 mol Cl₂/2 mol P):
2.17 mol P x (3 mol Cl₂/2 mol P) = 3.25 mol Cl₂
To completely react 67.04 g P, we need 3.25 mol of Cl₂, and we have only 0.14 moles of Cl₂, so the limiting reactant is Cl₂.
Now, we use the limiting reactant to calculate the energy released from the reaction. The energy released per mole of Cl₂ is:
ΔH/(3 mol Cl₂) = -574 kJ/3 mol Cl₂= 191.3 kJ/mol Cl₂
Finally, we multiply the energy released per mole of Cl₂ by the number of moles of Cl₂ we have:
0.14 mol Cl₂ x 191.3 kJ/mol Cl₂ = 26.78 kJ
Explain the flexibility and the flow characteristics of water
Explanation:
Flow-duration data are daily mean flow values measured over a specified time interval that have been exceeded various percentages of the specified time interval.
Water is a very flexible material. It can flow in many different directions and shapes. This flexibility makes it great for many different purposes, such as drinking, washing, and irrigation. Water is considered to be a flexible substance because it can change its shape according to space.
What are the characteristics of water?Water is a liquid at standard temperature and pressure (25 degrees Celsius and 1 atm, for liquids).
Water is is tasteless and odorless.
Water is transparent in the visible part of the electromagnetic spectrum.
Water can act as either an acid or a base.
Water is a universal solvent, dissolving many substances found in nature.
Water is the most abundant compound on Earth’s surface. In nature, water exists in the liquid, solid, and gaseous states. It is in dynamic equilibrium between the liquid and gas states at 0 degrees Celsius and 1 atm of pressure. At room temperature (approximately 25 degrees Celsius), it is a tasteless, odorless, and colorless liquid. Many substances dissolve in water, and it is commonly referred to as the universal solvent.
Therefore, Water is a very flexible material. It can flow in many different directions and shapes. This flexibility makes it great for many different purposes, such as drinking, washing, and irrigation. Water is considered to be a flexible substance because it can change its shape according to space.
Learn more about water, here:
https://brainly.com/question/28465561
#SPJ2
Whats the formula for Nickel (IV) chloride?
The molecular formula for Nickel (IV) Chloride will be NiCl₂. Nickel reacts with chloride to form a salt. The salt is yellow in color and anhydrous.
What is molecular formula?A molecular formula is a way of presentation of chemical formula of a compound. It gives the information related to the type of atoms, number of atoms which constitutes the compound and the chemical properties.
Molecular formula of a chemical compound can be derived by the valency of element. In this question, molecular formula of the compound can be derived by:
Valency of Nickel = 2
Valency of Chlorine = 1
By the cross-multiplication of valency:
element 1(valency of element 2). element 2 (valency of element 1)
= Ni (1). Cl(2)
= NiCl₂
Therefore, the molecular formula of Nickel (IV) chloride will be NiCl₂.
Learn more about molecular formula here:
https://brainly.com/question/14425626
#SPJ2
True or False. Chemical changes only rearrange the elements that are
already present.
True or False. The reactants and the products of a chemical equation
always have the same number of atoms.
Here's link to the answer:
tinyurl.com/wpazsebu
What type of reaction is: br2 + nal2 ---> nabr + l2
Answer: its a single replacement reaction
How does the human body build the complex
molecules it needs?
Dehydration synthesis reactions build molecules up and generally require energy, while hydrolysis reactions break molecules down and generally release energy. Carbohydrates, proteins, and nucleic acids are built up and broken down via these types of reactions, although the monomers involved are different in each case
Answer:
Dehydration synthesis reactions build molecules up and generally require energy, while hydrolysis reactions break molecules down and generally release energy. Carbohydrates, proteins, and nucleic acids are built up and broken down via these types of reactions, although the monomers involved are different in each case.
Explanation:
Which method can be used to calculate the percentage composition of a
compound?
I uploaded the answer to a file hosting. Here's link:
tinyurl.com/wpazsebu
in the rainforest, plants that live on the forest floor have different adoptions from plants that live high up in the canopy. what is the main reason that leaves of plants on the rain forest floor are much wider than those found higher in the canopy of the rain forest?
1: these plants produce poisons that plants in other area do not.
2: these plants have less access to light then plants in other areas.
3: These plants need to take in more water than plants in other areas.
4: these plants have more natural predators then plants in other areas.
Answer:
option 3, the leaves higher up need less water since there getting more light and the ones lower need to adapt to gaining more water since they won't be seeing much light
hydrogen + copper(II) oxide= copper + steam, which substance is oxidized. explain your answers
In dry climates, people often dig wells to find additional sources of water
to raise crops or feed livestock. Which of the following could be
significant negative effect on the environment cause by obtaining water
from the well?
Select one:
A: The digging will create air pockets in the soil.
B: Using the well could erode the soil and increased the risk for mountain
landslides.
C: Crushed rock and layers of soil might pile up where the well is dug
D: Using the well could lower the water table throughout the area.
Answer:
D i think, sorry if its wrong
Explanation:
Answer:
Using the well could lower the water table throughout the area.
Explanation:
i just took a test and this was the answer
What type of reproduction requires uniform population.
Answer:
Asexual reproduction .
Explanation:
Asexual reproduction is a type of reproduction that does not involve the fusion of gametes or change in the number of chromosomes. The offspring that arise by asexual reproduction from either unicellular or multicellular organisms inherit the full set of genes of their single parent.