3
Using the balanced equation
2 KCIO3 2 KCl + 302
If 9.6 moles of O2 are produced, how many moles of KCIO3 are decomposed?
6

Answer: Inorganic chemistry

Explanation:

Inorganic chemistry can be defined as the branch of chemistry which studies the behavior of the inorganic compounds. Inorganic compounds are those compounds which lack carbon hydrogen bonding. The carbon monoxide, carbon dioxide, sodium chloride and water are the examples of inorganic compounds. This branch also studies the effect of these chemical compounds on the living things. The water and salts are chemicals which regulate the chemical and physiological reactions in the body.

Answer:

They are different because one is someone who studies volcanoes and the other is someone who studies weather

Explanation:

Answer:

When one object is rubbed against another, static electricity can be created. This is because the rubbing creates a negative charge that is carried by electrons. The electrons can build up to produce static electricity. For example, when you shuffle your feet across a carpet, you are creating many surface contacts between your feet and the carpet, allowing electrons to transfer to you, thereby building up a static charge on your skin. When you touch another person or an object, you can suddenly discharge the static as an electrical shock.

Similarly, when you rub a balloon on your head it causes opposite static charges to build up both on your hair and the balloon. Consequently, when you pull the balloon slowly away from your head, you can see these two opposite static charges attracting one another and making your hair stand up.

Materials

• Balloon

• An object made out of wool (such as a sweater, scarf, blanket or ball of yarn)

• Stopwatch

• A wall

• A partner (optional)

Preparation

• Blow up the balloon and tie off the end.

• Have your partner prepare to use the stopwatch.

Procedure

• Hold the balloon in a way that your hand covers as little of its surface area as possible, such as by using only your thumb and pointer finger or by gripping the balloon by its neck where it is tied off.

• Rub the balloon on the woolly object once, in one direction.

• Hold the balloon up on the wall with the side that was rubbed against the wool facing the wall, then release it. Does the balloon stay stuck on the wall? If the balloon stays stuck, have your partner immediately start the stopwatch to time how long the balloon remains bound to the wall. If the balloon does not stick, move to the next step.

• Touch the balloon to a metal object. Why do you think this is important to do?

• Repeat the above process but each time increase the number of times you rub the balloon on the woolly object. Rub the balloon in the same direction each time. (Do not rub the balloon back and forth.)

Observations and results

In general, did the balloon stick to the wall for a longer amount of time as you increased the number of times you rubbed the balloon on the woolly object?

Wool is a conductive material, which means it readily gives away its electrons. Consequently, when you rub a balloon on wool, this causes the electrons to move from the wool to the balloon's surface. The rubbed part of the balloon now has a negative charge. Objects made of rubber, such as the balloon, are electrical insulators, meaning that they resist electric charges flowing through them. This is why only part of the balloon may have a negative charge (where the wool rubbed it) and the rest may remain neutral.

When the balloon has been rubbed enough times to gain a sufficient negative charge, it will be attracted to the wall. Although the wall should normally have a neutral charge, the charges within it can rearrange so that a positively charged area attracts the negatively charged balloon. Because the wall is also an electrical insulator, the charge is not immediately discharged. However, because metal is an electrical conductor, when you rub the balloon against metal the extra electrons in the balloon quickly leave the balloon and move into the metal so the balloon is no longer attracted and does not adhere.

HOPE IT HELPS

PLEASE MARK ME BRAINLIEST

The test variables and the control variable and the outcome variables are Balloons, the electrical insulators, and resist electric charges flowing through them.

When we brush a balloon against our head, the hair and balloon both develop opposing static charges. We can see how these two opposing static charges attract one another and make our hair stand up as the balloon is gently dragged away from our head.

When a balloon is rubbed to the wall, it will be attracted to the wall. Because the wall is an electrical insulator, the charge is not quickly discharged.

The excess electrons in the balloon immediately leave the balloon and go into the metal when it is rubbed against metal. As a result, the balloon is no longer attracted to the metal and does not adhere.

Therefore, Balloons, which act as electrical insulators and prevent the flow of electric charges, serve as the test, control, and outcome variables.

To learn more about variables, refer to the link:

https://brainly.com/question/29736640

#SPJ2

Solution :

Given :

length of silver cube = 2.28 cm

length of gold cube = 2.75 cm

Initial temperature = 82.8°C

Volume of silver cube is

Volume [tex]$=(\text{edge length})^3$[/tex]

               =    [tex]$(2.28)^3$[/tex]

                [tex]$= 11.8 \ cm^3$[/tex]

mass of silver cube

Mass, [tex]$m_s = \text{density} \times \text{volume} $[/tex]

                = 10.5 x 11.8

                = 123.9 g

Similarly, the volume of gold cube is

Volume [tex]$=(\text{edge length})^3$[/tex]

               =    [tex]$(2.75)^3$[/tex]

                [tex]$= 20.79 \ cm^3$[/tex]

mass of gold cube

Mass, [tex]$m_g = \text{density} \times \text{volume}$[/tex]

                = 19.3 x 20.79

                = 401.247 g

Now

heat lost by silver and gold cube = heat gained by water

∴[tex]$m_g .c_g \Delta T + m_s .c_s \Delta T = m_w.c_w \Delta T$[/tex]

[tex]$m_g .c_g (82.8- T) + m_s .c_s (82.8- T) = m_w.c_w (T - 20.2)$[/tex]

[tex]$401.247 \times 0.1264 (82.8- T) + 123.9 \times 0.2386 (82.8- T) = 111.5 \times 4.184 (T - 20.2)$[/tex]

Now solving the equation

[tex]$50.71 (82.8- T) + 29.56 (82.8- T) = 466.51 (T - 20.2)$[/tex]

Final temperature, T = 31.27°C

Answer:

I think A does because there are so many letters in their so a

Answer: Positive

Explanation: Just a guess

Answer:

Positive

Explanation:

Answer:

28

Explanation:

electron = atomic number - charge(if the charge is positive and addition if the charge is negative)

electron = 30 - 2

electron = 28

Answer: Each p orbital can hold 6 electrons.

Explanation: The p sublevel has 3 orbitals, so it can contain a maximum of 6 electrons.

Answer:

2KOH + 3co2 ------->2ксоз + 2Н20

Answer:

The frequency of coral diseases has increased significantly over the last 10 years, causing widespread mortality among reef-building corals. Many scientists believe the increase is related to deteriorating water quality associated with human-made pollutants and increased sea surface temperatures.

Explanation:

they are found on the crust

Answer:

crust

Explanation:

A scientist exploring evidence from other fields of science to support findings is an example of a scientist using creativity.

Creativity is a mental cognitive ability that involves the creation and/or discovery of a hidden process.

In science, creativity refers to the application of mental skills to create new experimental designs and extrapolate findings.

In conclusion, a scientist exploring evidence from other fields of science to support findings is an example of a scientist using creativity.

Learn more about creativity here:

https://brainly.com/question/26061350

#SPJ1

Answer:Actinide Group

Explanation:Plutonium is a member of the actinide group in the periodic table. Plutonium atoms have 94 electrons and 94 protons with 2 valence electrons in the outer shell. There are 150 neutrons in the most abundant isotope.

Answer:

FLUORINE

The most reactive nonmetal is fluorine. Fluorine is a halogen, which is Group 17 on the periodic table, and the halogens are the most reactive nonmetals. This is because they all have one empty space in their valence electron shells.

Explanation:

Answer:

the image won't load so maybe upload it again please

x CO₂  = 0.236

x H₂  = 0.764

Given

P CO₂ = 217 mmHg

P H₂ = 703 mmHg

Required

The mole fraction

Solution

Dalton's law :

The total pressure of a mixture of gases is equal to the sum of the partial pressures of the component gases  

Can be formulated:  

P tot = P1 + P2 + P3 ....  

P tot for the mixture :

= 217 mmHg + 703 mmHg

= 920 mmHg

Mole fraction of each gas :

x CO₂ = 217 mmHg/920 mmHg = 0.236

x H₂ = 703 mmHg/920 mmHg = 0.764

Answer:

This strong current of warm water influences the climate of the east coast of Florida, keeping temperatures there warmer in the winter and cooler in the summer than the other southeastern states. Since the Gulf Stream also extends toward Europe, it warms western European countries as well.

Answer:

warm climates in northern Europe

Explanation:

I took the test in K12 and this was the answer :)

Answer:

0.105 mol/dm³

Explanation:

From the question given above, the following data were obtained:

Mass of MgCl₂ = 10 g

Volume of solution = 1 dm³

Concentration of MgCl₂ =?

Next, we shall determine the number of mole present in 10 g of MgCl₂. This can be obtained as follow:

Mass of MgCl₂ = 10 g

Molar mass of MgCl₂ = 24 + (2 ×35.5)

= 24 + 71

= 95 g/mol

Mole of MgCl₂ =?

Mole = mass /Molar mass

Mole of MgCl₂ = 10 / 95

Mole of MgCl₂ = 0.105 mole

Finally, we shall determine the concentration of MgCl₂. This can be obtained as follow:

Mole of MgCl₂ = 0.105 mole

Volume of solution = 1 dm³

Concentration of MgCl₂ =?

Concentration = mole / Volume

Concentration of MgCl₂ = 0.105 / 1

Concentration of MgCl₂ = 0.105 mol/dm³

Concentration is [tex]0.105\ mol/dm^{3}[/tex]

Given:-

Mass of MgCl₂ = 10 g

Volume of solution = [tex]1\ dm^{3}[/tex]

Concentration of MgCl₂ =?

[tex]Molar mass of MgCl_2 = 24 + (2\times35.5)\\= 24 + 71\\= 95 g/mol[/tex]

 Mole of MgCl₂ =?

The number of moles is calculated by the equation as follows:-

[tex]Mole = mass /Molar massMole of MgCl_2= 10 / 95Mole of MgCl_2 = 0.105 mole[/tex]  

Determine the concentration of [tex]MgCl_2[/tex] as follows:-

Mole of MgCl₂ = 0.105 mole

Volume of solution = 1 dm³

Concentration of MgCl₂ =?

[tex]Concentration = mole / Volume\\Concentration\ of\ MgCl_2 = 0.105 / 1\\Concentration \ of\ MgCl_2= 0.105 mol/dm^{3}[/tex]

Hence the concentration of 10g of magnesium chloride is [tex]0.105 mol/dm^{3}[/tex].

To know more about:-

brainly.com/question/16380318

Answer:When acids react with carbonates,---CO2--------gas is liberated.

Explanation:

Acids liberate Carbon IV oxide when they react with  Carbonates  bicarbonate

For examples

Acid +carbonate  ⟶ Salt + Water + Carbon dioxide

Calcium carbonate + Hydrochloric acid  will give Calcium chloride with the liberation of CO2 gas and water

CaCO3 + 2HCl →CaCl2 + CO2 + H2O

To Test for the presence of the CO2 Liberated, we pass the gas through lime water, if the lime water turns milky, then C02 gas is confirmed.

(NH₄)₂S

%N=  41.18%

%H =11.76%

%S=47.06%

Mg(NO₃)₂

%Mg=32.43%

%N=18.92%

%O=(64.86%

Given

(NH₄)₂S

Mg(NO₃)₂

Required

The percent composition

Solution

(NH₄)₂S MW=68 g/mol

%N=2. Ar N  / MW (NH₄)₂S x 100%

%N= (2.14/68) x 100% = 41.18%

%H =(8.1/68) x 100%=11.76%

%S=(32/68)x 100%=47.06%

Mg(NO₃)₂ MW=148 g/mol

%Mg=(2.24/148)x100%=32.43%

%N=(2.14/148)x100%=18.92%

%O=(6.16/148)x100%=64.86%

Answer: The pancreas is a gland organ located in the abdomen. ... The end of this duct is connected to a similar duct that comes from the liver, which delivers bile to the duodenum. ... A person can usually treat minor chest injuries at home with rest and ...

Answer: 3 they move more freely since water is a liquid and ice is a solid in a solid molecules are more compact and cannot move around much but in a liquid it moves more freely than it would in a solid.

Explanation:

Compared to ice, molecules of water behave differently in that they move more freely. The Option C.

In the solid state, water molecules arrange themselves into a crystal structure, forming a lattice in ice. This lattice structure restricts the movement of the water molecules causing them to vibrate in fixed positions.

On the other hand, in the liquid state, the water molecules have more kinetic energy allowing them to move more freely and interact with each other by forming temporary hydrogen bonds. This increased mobility of water molecules in the liquid state enables them to flow and take the shape of their container.

Read more about water molecules

brainly.com/question/2960517

#SPJ6

Answer:

P(O₂) = 287.41 mmHg

P(O₂) = 413.59 mmHg

Explanation:

Given data:

Total pressure = 701 mmHg

Mass of methane = 2.75 g

Mass of oxygen = 3.45 g

Partial pressure of each gas = ?

Solution:

Number of moles of methane:

Number of moles = mass/molar mass

Number of moles = 2.75 g/ 16 g/mol

Number of moles = 0.17 mol

Number of moles of oxygen:

Number of moles = mass/molar mass

Number of moles = 3.45 g/ 32 g/mol

Number of moles = 0.12 mol

Total number of moles = 0.12 mol + 0.17 mol = 0.29 mol

Partial pressure of oxygen:

P(O₂)  = [ moles of oxygen / total moles ] × total pressure

P(O₂) = [0.12  / 0.29 ] × 701 mmHg

P(O₂) = 0.41 × 701 mmHg

P(O₂) = 287.41 mmHg

Partial pressure of methane:

P(O₂)  = [ moles of oxygen / total moles ] × total pressure

P(O₂) = [0.17  / 0.29 ] × 701 mmHg

P(O₂) = 0.59 × 701 mmHg

P(O₂) = 413.59 mmHg

1.63 M

Math

Pre-Algebra

Order of Operations: BPEMDAS

Equality Properties

Chemistry

Unit 0

Aqueous Solutions

Step 1: Define

1.43 mol NaCl (sodium chloride)

0.875 L solution

Step 2: Find M

Step 3: Check

Follow sig fig rules and round. We are given 3 sig figs.

1.63429 M ≈ 1.63 M

Answer:

the answer is neutron :)))))))))

Answer:

4Na  +   O₂  →   2Na₂O  

6.82g

Explanation:

The combustion of sodium involves combining the element with oxygen gas:

              4Na  +   O₂  →   2Na₂O  

We have been given 5g of Na.

The balanced reaction equation is given as shown above. This reaction is also a synthesis or combination reaction.

b. Maximum amount of product that can be obtained.

Sodium is the limiting reactant and it will determine the amount of product that can be formed.

  To solve this, we find the number of moles of the given sodium.

  Mass of given sodium  = 5g

    Molar mass of Na  = 23g/mol

  Number of moles of Na  = [tex]\frac{mass}{molar mass}[/tex]  

Insert the parameters and solve;

 Number of moles of Na  = [tex]\frac{5}{23}[/tex]    = 0.217moles

  From the balanced reaction equation:

         4 moles of Na will produce 2 moles of Na₂O  

      0.217 moles of Na will produce [tex]\frac{0.217 x 2}{4}[/tex]   = 0.11mole of Na₂O  

So;

 Mass of Na₂O   = number of moles x molar mass

    Molar mass of Na₂O   = 2(23) + 16  = 62g/mol

 Mass of Na₂O   = 0.11 x 62  = 6.82g

Answer:

Heated water begins circulating in a fish tank.

Explanation:

Answer:

Heated water begins circulating in a fish tank.