36.0 g of Be contains how many moles?

Answers

Answer 1

Answer:

Explanation:

4


Related Questions

Given that nitrogen forms
three bonds with hydrogen to
make NH3, how many hydrogen
atoms do you think will bond
with an atom of phosphorous?

Answers

Answer:

Three

Explanation:

Nitrogen and phosphorus are on the same group in the periodic table. Elements in the same group have similar chemical properties. This is because of the number of valence electrons that they share among each other.

 The valence electrons are the outermost shell electrons found within an atom.

Nitrogen and phosphorus can both be found on the fifth group on the periodic table.

Their oxidation state is:

either 5 or 8-5  = 3

Since phosphorus bonds with 3 hydrogen atoms, nitrogen will also do the same.

what does group 16 (oxygen family) have in common

Answers

Answer: here is your answer

Explanation:

The oxygen family consists of the elements that make up group 16 on the periodic table: oxygen, sulfur, selenium, tellurium, and polonium. These elements all have six electrons in their outermost energy level, accounting for some common chemical properties among them.

Answer:

they all have 6 valence electrons

Explanation:

all elements in group 16 have 6 valence electrons


help plz and can you plz use terms

Answers

I’m not sure but I hope yu get the right answer sorry

Aluminum is used to build aero planes. Which two of its physical properties make it suitable for this use

Answers

Answer:

Titanium is another metal that's commonly used in aerospace engineering. It's strong, lightweight, Aluminum isn't the strongest metal, but it maintains a perfect balance of strength and low weight that make airplanes fly

Explanation:

vote mee as the brainliest

Answer:

it weight were so thin

explanation

With a weight roughly a third lighter than steel, it allows an aircraft to either carry more weight, or become more fuel efficient. High Strength — Aluminum's strength allows it to replace heavier metals without the loss of strength associated with other metals, while benefitting from its lighter weight

What are two sources of phosphorous?
A. Cows
B. Erosion
C. stratosphere
D. Fossil fuels
E. Fertilizer

Answers

Answer: A. Cows

E. Fertilizer

Explanation:

Humans have developed ways to increase the of their
environment. true or false

Answers

Answer:

True......................had to do this because we need atleast 20 letters

help Mepleaseeeee !!!

Answers

Answer:

The 500kg boulder

Explanation:

500kg Boulder, the answer u have rn is right

why do water bodies evaporate.

Plss I need help​

Answers

Answer:

the heat from the sun makes the water molecules move faster and faster, until they move so fast they escape as a gas.

Explanation:

please tell me if I'm wrong

What is the overall trend for ionization energy on the periodic chart?

Answers

Answer:

The general trend is for ionization energy to increase moving from left to right across an element period. Moving left to right across a period, atomic radius decreases, so electrons are more attracted to the (closer) nucleus.

Explanation:

Brainliest plz

Answer:

Ionization energy increases across the period and decreases down the group.

burning methane in air is an exothermic reaction

true
false

Answers

Answer:

Hydrocarbon fuels like methane (CH4) burn in the presence of oxygen to produce carbon dioxide and water. This process of combustion releases energy. When energy is released during the course of a chemical reaction, it is said to be an EXOTHERMIC reaction. The combustion of of methane gas releases 50.1 kJ/g.

true

The burning of methane in the presence of air is an exothermic reaction. The given statement is true.

Exothermic Reaction:

The chemical reaction in which heat energy is released during the reaction.

For example-  the burning of 1 mole of methane in the air releases 810 kJ of heat energy.

[tex]\bold {CH_4 +2O_2 \rightarrow CO_2 + 2H_2 O}\ \ \ \ \ \ \ \bold{\Delta H = 810\ kJ}[/tex]

Therefore, the burning of methane in the presence of air is an exothermic reaction.

To know more about Exothermic Reactions:

https://brainly.com/question/14969584

Which of the following is not a form of precipitation?

A
groundwater

B
balls of hail

C
sleet

D
snowflakes

Answers

A.

Reason: cuz i need points noob

The table shows the recipe and the available ingredients for making the maximum possible number of sandwiches.
Making Sandwiches
Recipe for One Sandwich
Total Ingredients Available
1 cheese slice, 2 lettuce leaves, 2 bread slices Total ingredients available: 8 cheese slices, 6 lettuce leaves, 6 bread slices
If the ingredients represent reactants of a chemical reaction, which of the following represents the leftover reactant?
OTwo cheese slices
Two lettuce leaves
Five lettuce leaves
Five cheese slices

Answers

Answer:

5 Cheese Slices

Explanation:

I took the quiz and got it right.

Answer:

Five cheese slice

Explanation:

8-1-1-1=5

Which of the following atoms would have a charge of +1?
An atom with 9 protons, 9 electrons, and 9 neutrons
An atom with 7 protons, 11 electrons, and 8 neutrons
An atom with 5 protons, 5 electrons, and 4 neutrons.
An atom with 6 protons, 5 electrons, and 7 neutrons

Answers

Answer: An atom with 6 protons, 5 electrons, and 7 neutrons

Explanation: In this case, neutrons do not matter as they have a charge of 0, or no charge. A proton has a charge of +1 and an electron has a charge of -1. Since there are 6 protons, the total charge of the protons would be +6. Since there are 5 electrons the total charge of the electrons would be -5. +6 - 5 would result in a charge of +1. This means that this atom would have an overall charge of + 1. Basically, if there is one more proton than electron, then the overall charge of the atom will be +1 but if there is one more electron than proton, then the overall charge of the atom will be -1.

In mass-volume and volume-mass calculations, all gases are
considered to be at standard
____
and pressure, also
referred to as
___


answer: temperature, stp
:P

Answers

Answer: temperature, Stp

Explanation:

The calculation for standard temperature and pressure has been referred to as STP.

The mass-volume and volume-mass, has been the measurement of the concentration of the solution.

The mass-volume has been the measurement of mass of sample in the volume of solution. The volume by mass has been the measurement of the volume of solute to mass of solution.

Standard conditions

The measurement has been performed with the standard conditions of temperature and pressure.

The standard temperature has been 273.5 K and standard pressure has been 1 atm. These temperatures and pressure has been referred to as STP.

Thus, the calculation for standard temperature and pressure has been referred to as STP.

Learn more about standard conditions, here:

https://brainly.com/question/2142674

Although chemical digestion occurs throughout the digestive system, it mostly occurs in the A esophagus and stomach
B
liver and gall bladder
C
liver and pancreas
D
stomach and intestines

Answers

D: stomach and intestines :)

As the human population grows, the size of cities increases. As cities grow, more land must be cleared to make way for homes, businesses, and roads. Which two events would be likely effects of replacing a forested area with an urban area? A. More air pollution because there are fewer trees to take in carbon dioxide B. Less erosion of soil as plants covering the ground are added to gardens C. Fewer birds and other wildlife because they have fewer places to live D. More trees because of increased solar energy in the area​

Answers

Answer:1. Introduction

The main air pollutants are represented by gases forms, particles in suspension, different ionizing radiation and noise.

The gases forms are: oxidized and reduced forms of carbon (CO2, CO, CH4), of nitrogen (NO2, NO, N2O4, NH3, NH4+), SO2, O3, C6H6 vapours, Hg, volatile phenols, Cl2, etc.

The particulate forms are: PM10 and PM2.5 particulate matter, heavy metals with toxic effect (Pb, Ni, Cd, As), polycyclic aromatic hydrocarbons PAHs, etc.

Atmospheric pollutants have a negative effect on the plants; they can have direct toxic effects, or indirectly by changing soil pH followed by solubilization of toxic salts of metals like aluminum. The particulate matters have a negative mechanical effect. They cover the leaf blade reducing light penetration and blocking the opening of stomata. These impediments influence strongly the process of photosynthesis which rate declines sharply.

Explanation:

Answer:

A More air pollution because there are fewer trees to take in carbon dioxide

C Fewer birds and other wildlife because they have fewer places to live

Explanation:

I took the test on A P E X

Uhm how to do this? I need answers to this please

Answers

Answer:

Hi - First you need to determine whether there is a metal or no and from there there are certain rules in order to name the compound. Here is a flowchart to try and help.

What is the % of water in (MgSO4 . 2H2O)?

Answers

Answer: A hydrate is found to have the following percent composition: 48.8% MgSO4 and 51.2% water.

Explanation:

i dont know

What part of the atom contains the protons and neutrons?

Answers

answer: the nucleus
hope this helps :)
The Nucleus of an atom contains protons and neutrons

what’s the correct answer !!

Answers

Answer:

From my side the correct option is "A"

Explanation:    Reasons for its correction are ,

1)  Highly reactive: Nanoparticles are therefore extremely unstable and easily change themselves or react with active substances to reach a relatively stable state in some cases. This causes desired changes or undesired changes to nanoparticles and thus makes them exhibit a high reactivity and a poor stability.

2)Small size:  Nanotechnology can provide rapid and sensitive detection of cancer-related molecules, enabling scientists to detect molecular changes even when they occur only in a small percentage of cells. Nanotechnology also has the potential to generate entirely novel and highly effective therapeutic agents.

The roots of a plant help to anchor the plant to soil, and are also used for food storage and water extraction. Roots are made up of tissues, such as xylem, Phloem, and pith. In which level of organization would the roots of a plant most likely be classified?

Answers

Answer;

Cells, Organism.

Explanation:

Roots are made up of tissues, such as xylem, phloem, and pith. In which level of organization would the roots of a plant most likely be classified as?

Which organ system supports the body and allows it to move?

Answers

That would be the skeletal system, hope this helps ^^

Bill stands in a swimming pool and notices that the water around his feet is a lot cooler than the water near the surface which process causes this difference in temperature?
1. convection
2. evaporation
3. radiation
4. conduction

Submit Answer​

Answers

Answer:

convection

Explanation:

I think answer should be convection please let me know if it’s correct or not okay thanks bye

What is the temperature change that 725 g of aluminum will undergo when 2.35 x 104
J of thermal energy are added to it?

Answers

Answer:

36°C

Explanation:

Given parameters:

Mass of aluminum = 725g

Quantity of heat  = 2.35 x 10⁴J

Unknown:

Temperature change  = ?

Solution:

To solve this problem, we simply use the expression below:

  The quantity of energy is given as:

          Q  = m C Δt

Q is the quantity of energy

m is the mass

C is the specific heat capacity of aluminum  = 0.9J/g°C

Δt is the change in temperature

  The unknown is Δt;

             Δt  = [tex]\frac{Q}{mc}[/tex]    = [tex]\frac{2.35 x 10^{4} }{725 x 0.9}[/tex]    = 36°C

Physical and chemical properties are used to describe and identify matter. Physical properties can be observed without changing the identity of the substance. Chemical properties can be observed by attempting to change the identity of a substance. What are two physical and chemical properties that you can use to help you identify a substance?

Answers

Extensive properties, such as mass and volume, depend on the amount of matter that is being measured. ... Both extensive and intensive properties are physical properties, which means they can be measured without changing the substance's chemical identity

3rd law of thermodynamics..

2 Different Examples((Thnks))

Answers

Answer:

See explanation

Explanation:

The third law of thermodynamics states that "the entropy of a perfect crystal of a pure substance approaches zero as the temperature approaches zero" (Wikipedia).

One example of the third law of thermodynamics has to do with steam. Steam is gaseous water. Since it is a gas, its molecules are free to move around therefore its entropy is high. When the temperature of the steam is decreased below 100 degrees, the molecules of steam loose energy and turn into liquid water and do not move as freely as they did in the gaseous state. If the temperature is further decreased to yield ice at zero degrees, the molecules of water are "frozen" in their positions and the entropy of the system decreases to zero.

Also, the ions in ionic crystal solids move around when the substance is in solution or in molten state hence the substance conducts electricity. When the ionic substance is in solid state, the ions do not move about and the entropy of the solid system tends towards zero.

Given the following reaction, how many moles of iron(III)
oxide can be produced from 65.2 moles of iron?
4Fe + 302 → 2Fe2O3

Answers

Answer:
32.6

Explanation;
The ratio of iron to iron oxide is 4:2, so you half the number of moles of iron to get the number of moles of iron oxide

Which statement best explains the net transfer of energy that is about to
happen in this photo?
A. The racket and the ball will both gain kinetic energy.
B. The ball will gain kinetic energy, and the racket will lose kinetic
energy
C. The racket will gain potential energy, and the ball will lose kinetic
energy
D. The racket and the ball will both lose potential energy

Answers

Answer:

Explanation:

B I got it right

Answer:

B. The ball will gain kinetic energy, and the racket will lose kinetic

energy

Explanation:

Identify the reaction type shown and describe the clues that were used to identify it.

NH4NO3 → N2O + 2H2O

Answers

Answer:

This chemical equation represents a decomposition reaction. This identification is based on the fact that the single reactant chemical compound breaks down into two different chemical substances that are different from the initial chemical substance.

Explanation:

it was the sample response lol

A reactant is broken down into two or more products in the decomposition reaction. The given reaction is a decomposition reaction.

Decomposition reaction:

In this type of chemical reaction, a reactant is broken down into two or more products.

For example- Ammonium nitrate is broken down into nitrous oxide and water molecules.

[tex]\bold {NH_4NO_3 \rightarrow N_2O + 2H_2O}[/tex]

Therefore, the given reaction is a decomposition reaction.

To know more about Decomposition reaction:

https://brainly.com/question/24936069

3
Which two elements are the most abundant in the Earth's crust?
OA. iron and magnesium
B. iron and nickel
Oc. silicon and magnesium
OD. silicon and oxygen
Novomatlan
Yes

Answers

Answer:

Look at the properties of Oxygen and Silicon - the two most abundant elements in the Earth's crust - by clicking on their symbols on the Periodic Table.

Explanation:

Answer:

D. silicon and oxygen

Explanation:

The most abundant elements on the earth's crust are silicon and oxygen. Silicon and oxygen forms a wide range of silicate minerals they are found in the crust.

There are many silicates which are derived from the basal units of silicon and oxygen combining together. Other atoms or elements then combines with the silicate framework.

Oxygen is about 46% abundant in the crust whereas silicon takes about 28% to be the second most abundant element on the crust.

Silicate minerals abounds in rocks and within the soil.

Other Questions
who is george Washington Jose's school is 4 km away. He walked 30 min at 5 km/hr when he realized he was running late and started running. How fast does he need to to make it to school before the bell rings in 15 minutes. In its first year of operations, Cullumber Company recognized $33,700 in service revenue, $6,700 of which was on account and still outstanding at year-end. The remaining $27,000 was received in cash from customers. The company incurred operating expenses of $17,100. Of these expenses, $13,300 were paid in cash; $3,800 was still owed on account at year-end. In addition, Cullumber prepaid $2,730 for insurance coverage that would not be used until the second year of operations.Required:a. Calculate the first years net earnings under the cash basis of accounting, and the first years net earnings under the accrual basis of accounting.b. Which basis of accounting (cash or accrual) provides more useful information for decision-makers? The residents of cities A, B, C, D and E consume wi-fi routers, with consumption in each city is 150 routers (see the map below). The firm that produces routers must decide how to set-up production. It could set up five factories, dispersed across each city, with each factory producing 150 routers and supplying to its own local city market. In this case, the firm incurs no cost for shipping output. Alternatively, the firm could locate its factory at centrally located city C, and supply routers to the entire region. The single factory in city C must then produce 750 routers, 600 of which are shipped to the cities A, B, D and E for a shipping cost of $6 per router. A ECB D(a) Suppose the average cost of producing a router is AC (Q) = 1500/Q, where Q is the number of routers produced in a factory. Calculate AC with Q = 150 and Q = 750, respectively. Note and explain how this production process exhibit economies of scale. (b) Based on the AC function from part (a), find the optimal arrangement of production for the firm (one central factory or five dispersed factories). The optimal arrangement minimizes total cost for the firm, where total cost is the sum of production cost and shipping cost. Clearly write down all your calculations. (c) Now suppose the average cost of producing a router is AC = 14000/(Q+1250). Now, repeat the calculation of AC with Q = 150 and Q = 750. (d) Based on the AC function from part (c), now repeat your calculations to find the cost-minimizing arrangement of production in the case. (e) Explain intuitively the difference is results between responses to part (b) and (d). (f) Suppose now production costs are those given in part (a) but let shipping cost per router be given by t (in the preceding discussion, we had t = 6, now we assume we dont know the cost of shipping). What value of t would make the two arrangements for production (centralized versus separate factories) equivalent in terms of cost? i.e. what value of t would make the firm indifferent between a centralized versus a dispersed set-up? What are the advantages of asexual propagation. "Even then he was the most striking figure in Starkfield,though he was but the ruin of a man" Lucky Strike Mine (LLC) purchased a silver deposit for $1,500,000. It estimated it would extract 500,000 ounces of silver from the deposit. Lucky Strike mined the silver and sold it, reporting gross receipts of $1.8 million, $2.5 million, and $2 million for Years 1 through 3, respectively. During Years 1 through 3, Lucky Strike reported net income (loss) from the silver deposit activity in the amount of ($100,000), $400,000, and $100,000, respectively. In Years 1 through 3, Lucky Strike actually extracted 300,000 ounces of silver as follows: Ounces extracted per year Year 1 Year 2 Year 3 50,000 150,000 100,000 What is Lucky Strike's depletion deduction for Year 2 if the applicable percentage depletion for silver is 15 percent Mortensen Industries, which uses a process-costing system, adds material at the beginning of production and incurs conversion cost evenly throughout manufacturing. The following selected information was taken from the company's accounting records: Total equivalent units of materials: 8,000 Total equivalent units of conversion: 7,240 Units started and completed during the period: 6,100 On the basis of this information, the ending work-in-process inventory's stage of completion is: show work!!A sample is 54.7g CaCl2 and 53.64 g H20. Howmany water molecules are associated with thishydrate? please help urgent!!!!! Ash is 4 years younger than Gary, and Oak is 5 times Gary's age. The sum of their three ages is 94. Find Gary's age. Show working out. Thanks!! Which function on the Capital IQ platform allows users to receive notifications when there are any news or key developments entered for selected companies? 10. Write the equation of a line in slope-intercept form that passesthrough the points (-2, 3) and (0,8).y = mx + bEquation: The following data are for Guava Company's retiree health care plan for the current calendar year. Number of employees covered 5 Years employed as of January 1 4 (each) Attribution period 20 years EPBO, January 1 $ 64,000 EPBO, December 31 $ 68,480 Interest rate 7 % Funding and plan assets None What is the service cost to be included in the current year's postretirement benefit expense? 6.900x10^10 4.000x10^8 How was cotton production in Texas affected by the Civil War?A. Cotton production was unaffected by the war.B. Cotton production steadily increased each decade in the late 1800s.C. Cotton production declined during the war, but increased sharply in the decades thatfollowed the war. w=x^2-2yx make y the subject of the formula 4.3 m to centimeters The study of the role consumers play in a economic system is called what May someone please fill this out correctly pls.WILL AMEK BRAINLIST