34.9 g pf hydrogen gas adn 17.7 g of methane gas are combined in a reaction vessel with a total pressure at 2.92 atm. what is the partial pressure of hydrogen gas?

To calculate the change in volume when 170.0 mL of gas is cooled from 30.0 °C to 20.0 °C using Charles' Law, we need to use the relationship between volume and temperature for an ideal gas. Charles' Law states that at constant pressure, the volume of a gas is directly proportional to its temperature.

By using the formula V₁ / T₁ = V₂ / T₂, where V₁ and T₁ are the initial volume and temperature, and V₂ and T₂ are the final volume and temperature, we can determine the change in volume.

According to Charles' Law, the ratio of the initial volume to the initial temperature is equal to the ratio of the final volume to the final temperature:

V₁ / T₁ = V₂ / T₂

Plugging in the given values:

V₁ = 170.0 mL

T₁ = 30.0 °C + 273.15 = 303.15 K

T₂ = 20.0 °C + 273.15 = 293.15 K

Substituting these values into the equation:

170.0 mL / 303.15 K = V₂ / 293.15 K

To solve for V₂, we rearrange the equation:

V₂ = (170.0 mL / 303.15 K) * 293.15 K

Simplifying the equation:

V₂ ≈ 163.3 mL

Therefore, the change in volume is approximately 163.3 mL when 170.0 mL of gas is cooled from 30.0 °C to 20.0 °C.

To learn more about Charles' Law - brainly.com/question/14842720

#SPJ11

If the atom is in its ground state, the ionization energy is approximately 13.6 eV, whereas for the n = 3 state, the ionization energy is approximately 1.51 eV.

The work required to pull apart the electron and proton in a hydrogen atom depends on the initial state of the atom. If the atom is in its ground state, the work required is known as the ionization energy, which is approximately 13.6 electron volts (eV). This means that 13.6 eV of energy must be supplied to the system to completely separate the electron and proton.

If the hydrogen atom is in the state with n = 3, the work required to separate the electron and proton will be different. This is because the electron is in a higher energy state, which means it is further away from the proton and experiences less attraction. The ionization energy for the n = 3 state is approximately 1.51 eV, which is much less than the ionization energy for the ground state.

Learn more about ionization energy here:

https://brainly.com/question/28385102

#SPJ11

The density of the liquid in the container is 25.45 grams per cubic centimetre which can be calculated by finding the difference in mass between the full and empty container and dividing it by the volume of the container.

To calculate the density of the liquid in the container, we need to find the difference in mass between the full and empty container. The mass of the liquid can be obtained by subtracting the mass of the empty container from the mass of the full container: 8501g - 682g = 7819g.

Next, we need to calculate the volume of the container. The volume of a rectangular container can be determined by multiplying its length, width, and height: [tex]2.50 cm * 10.1 cm * 12.2 cm = 306.95 cm^3.[/tex]

Finally, we can calculate the density by dividing the mass of the liquid by the volume of the container: [tex]7819g / 306.95 cm^3 = 25.45 g/cm^3.[/tex]

Therefore, the density of the liquid in the container is 25.45 grams per cubic centimetre.

Learn more about  density of the liquid here:

https://brainly.com/question/17736639

#SPJ11

The most soluble of these compounds is methanoic acid. This is due to its smaller molecular size and ability to form stronger hydrogen bonds with water molecules compared to ethanoic acid and pentanoic acid.

Methanoic acid has only one carbon atom and a carboxylic acid functional group, allowing it to readily interact with water molecules through hydrogen bonding. Ethanoic acid has a longer carbon chain and a weaker hydrogen bonding ability, while pentanoic acid has an even longer carbon chain and is less soluble due to its large molecular size.

In addition, the smaller size of methanoic acid allows it to dissolve more easily in water and form a more stable solution due to its ability to interact more closely with water molecules, leading to higher solubility compared to the other two acids.

To know more about the methanoic acid refer here :

https://brainly.com/question/29587812#

#SPJ11

The volume of H₂ produced from the complete consumption of 10.2 g Zn in excess 0.100 M HCl at a pressure of 725 torr and a temperature of 22.0 °C is 4.81 L.

The balanced chemical equation for the reaction between zinc (Zn) and hydrochloric acid (HCl) is:

Zn + 2HCl → ZnCl₂ + H₂

From the equation, we can see that 1 mole of Zn reacts with 2 moles of HCl to produce 1 mole of H₂.

First, let's calculate the number of moles of Zn in 10.2 g:

molar mass of Zn = 65.38 g/mol

moles of Zn = 10.2 g / 65.38 g/mol = 0.156 moles

Since the HCl is in excess, it won't be fully consumed, and we can assume that all of the Zn will react to produce H2.

Next, we can use the ideal gas law to calculate the volume of H2 produced:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

First, let's convert the pressure from torr to atm:

1 torr = 1/760 atm

P = 725 torr * (1/760) = 0.954 atm

Next, let's convert the temperature from Celsius to Kelvin:

T = 22.0 °C + 273.15 = 295.15 K

Now we can substitute the values into the ideal gas law and solve for V:

V = nRT / P

V = 0.156 mol * 0.0821 L·atm/mol·K * 295.15 K / 0.954 atm

V = 4.81 L

Learn more about volume: https://brainly.com/question/1578538

#SPJ11

In a saturated solution of calcium phosphate with a solubility of 2.21 x 10^{-4} g/L, the molar concentration of the calcium ion (Ca^{+2}) is approximately 7.13 x [tex]10^{-7}[/tex] M, and the molar concentration of the phosphate ion (PO_{4}^{-3}) is approximately 3.38 x 10^{-7} M.

To determine the molar concentrations of the calcium ion and the phosphate ion in the saturated solution of calcium phosphate, we need to use the given solubility and the molecular weight of calcium phosphate.

The solubility of calcium phosphate is given as 2.21 x10^{-4} g/L. We can convert this to moles per liter by dividing by the molar mass of calcium phosphate (310.18 g/mol):

2.21 x 10^{-4}g/L / 310.18 g/mol = 7.12 x 10^{-7} mol/L

Since calcium phosphate has a 1:1 ratio of calcium ions ([tex]Ca^{+2}[/tex]) to phosphate ions (PO43-), the molar concentrations of both ions in the saturated solution will be the same. Therefore, the molar concentration of the calcium ion and the phosphate ion is approximately 7.13 x 10^{-7}M.

In conclusion, in a saturated solution of calcium phosphate with a solubility of 2.21 x 1[tex]10^{-4}[/tex] g/L, the molar concentration of the calcium ion (Ca^{+2}) and the phosphate ion ([tex]PO_{4}^{-3}[/tex]) is approximately 7.13 x10^{-7} M.

Learn more about solubility here: https://brainly.com/question/29367909

#SPJ11

The solutions that are expected to have a pH greater than 7.00 are [tex]Ca(NO_3)_2[/tex] and [tex]C_6H_5COONa[/tex].

The solutions with a pH greater than 7.00 are basic, meaning they have a higher concentration of hydroxide ions ([tex]OH^-[/tex]) than hydrogen ions ([tex]H^+[/tex]). To determine which of the given solutions is basic, we need to identify which ones will produce hydroxide ions when dissolved in water.

a) [tex]NH_4Br[/tex] is the salt of a weak base ([tex]NH_3[/tex]) and a strong acid (HBr). When [tex]NH_4Br[/tex] is dissolved in water, the [tex]NH^{4+}[/tex] ion acts as a weak acid and releases [tex]H^+[/tex] ions, which will make the solution acidic rather than basic. Therefore, [tex]NH_4Br[/tex] is not expected to have a pH greater than 7.00.

b) [tex]C_6H_5NH_3Br[/tex] is the salt of a weak base ([tex]C_6H_5NH_2[/tex]) and a strong acid (HBr). Similar to [tex]NH_4Br[/tex], [tex]C_6H_5NH_3Br[/tex] will not produce hydroxide ions when dissolved in water and will instead release [tex]H^+[/tex] ions, making the solution acidic. Therefore, [tex]C_6H_5NH_3Br[/tex] is not expected to have a pH greater than 7.00.

c) [tex]Ca(NO_3)_2[/tex] is a salt of a strong base ([tex]Ca(OH)_2[/tex]) and a strong acid ([tex]HNO_3[/tex]). When [tex]Ca(NO_3)_2[/tex] is dissolved in water, it dissociates into [tex]Ca^{2+}[/tex] and [tex]NO^{3-}[/tex]  ions. [tex]Ca^{2+}[/tex] ions can react with water to form [tex]Ca(OH)^+[/tex] and [tex]OH^-[/tex] ions, which will increase the concentration of hydroxide ions in the solution, making it basic. Therefore, [tex]Ca(NO_3)_2[/tex] is expected to have a pH greater than 7.00.

d) [tex]C_6H_5COONa[/tex] is the salt of a weak acid ([tex]C_6H_5COONa[/tex]) and a strong base (NaOH). When [tex]C_6H_5COONa[/tex] is dissolved in water, it dissociates into [tex]C_6H_5COO^-[/tex] and [tex]Na^+[/tex] ions. [tex]C_6H_5COO^-[/tex] can react with water to form [tex]C_6H_5COONa[/tex] and [tex]OH^-[/tex] ions, which will increase the concentration of hydroxide ions in the solution, making it basic. Therefore, [tex]C_6H_5COONa[/tex] is expected to have a pH greater than 7.00.

For more question on pH click on

https://brainly.com/question/172153

#SPJ11

The enthalpy change(δH) for the reaction at -79.0 °C is -769.98 kJ.

To solve this problem, we will use the following equation:

ΔH = ΔH° + CpΔT

where ΔH is the enthalpy change at the new temperature,

ΔH° is the enthalpy change at the standard temperature (in this case, 164.4 °C),

Cp is the heat capacity of the system,

ΔT is the difference in temperature.

δH = -833.32 kJ = -833,320 J
δH° = 866.05 J/K

Calculating the heat capacity, Cp:

Cp = (ΔH - ΔH°) / ΔT

Cp = (-833,320 J - 866.05 J/K x 164.4 K) / (164.4 - (-79.0)K)

Cp = -834,186.58 J/K

Use the same equation to find the enthalpy change at the new temperature:

ΔH = ΔH° + CpΔT

ΔH = -833,320 J + (-834,186.58 J/K x (-79.0 - 164.4))

ΔH = -769,982.69 J

Convert this value back to the original units:

δ = ΔH / 1000 = -769.98 kJ

Therefore, the reaction's enthalpy change at -79.0 °C is -769.98 kJ.

To learn more about enthalpy change visit:

https://brainly.com/question/24180470

#SPJ11

The average speed of a molecule of C6H6 gas at 20.0 Celsius is approximately 306 m/s (Option D).

To calculate the average speed of a C6H6 molecule at 20.0 Celsius, we'll use the formula for the root-mean-square (rms) speed:

v_rms = √(3RT/M)

where:
- v_rms is the average speed of the gas molecules
- R is the universal gas constant (8.314 J/(mol·K))
- T is the temperature in Kelvin (20.0 Celsius + 273.15 = 293.15 K)
- M is the molar mass of C6H6 in kg/mol (78.1 g/mol × 0.001 kg/g = 0.0781 kg/mol)

Now, we'll plug the values into the formula:

v_rms = √(3 × 8.314 × 293.15 / 0.0781)

v_rms ≈ 306 m/s

Therefore, the average speed of a molecule of C6H6 gas at 20.0 Celsius is approximately 306 m/s (Option D).

Learn more about molecule

brainly.com/question/19922822

#SPJ11

Mass of nitrogen = (2.229*10^-3 mol) x (14.01 g/mol) = 3.12*10^-2 g
The answer is option b) 3.12x10^-2 g.

To calculate the mass of nitrogen in 7.43*10^-4 moles of 3TC, we first need to determine the number of moles of nitrogen present in one mole of 3TC. From the molecular formula of 3TC, we see that there are three nitrogen atoms. Therefore, the number of moles of nitrogen in one mole of 3TC is 3/1 = 3 mol/mol.
Next, we can calculate the number of moles of nitrogen in 7.43*10^-4 moles of 3TC by multiplying this value by the number of moles of 3TC:
moles of nitrogen = (3 mol/mol) x (7.43*10^-4 mol) = 2.229*10^-3 mol
Finally, we can use the molar mass of nitrogen (14.01 g/mol) to calculate the mass of nitrogen in grams:
mass of nitrogen = (2.229*10^-3 mol) x (14.01 g/mol) = 3.12*10^-2 g
Therefore, the answer is option b) 3.12x10^-2 g.

To know more about Molecular Formula visit:
https://brainly.com/question/28647690
#SPJ11

The pressure of carbon dioxide is needed to dissolve 100.0 mg of carbon dioxide in 1.00 L of water option (a) 0.0649 atm.

We can solve this problem using Henry's Law, which states that the solubility of a gas in a liquid is directly proportional to the partial pressure of the gas above the liquid. Mathematically, this can be expressed as:

C = k * P

where C is the concentration of the gas in the liquid, P is the partial pressure of the gas above the liquid, and k is the proportionality constant known as Henry's Law constant.

To find the partial pressure of carbon dioxide needed to dissolve 100.0 mg of carbon dioxide in 1.00 L of water, we first need to convert the mass of carbon dioxide to moles:

100.0 mg / (44.01 g/mol) = 0.00227 mol

The concentration of carbon dioxide in the water is then:

C = 0.00227 mol / 1.00 L = 0.00227 M

The  pressure of carbon dioxide is needed to dissolve 100.0 mg of carbon dioxide in 1.00 L of water is

Next, we can use Henry's Law to find the partial pressure of carbon dioxide:

P = C / k

The Henry's Law constant for carbon dioxide in water at 25 degrees C is 3.4 x [tex]10^{(-2)[/tex]M/atm.

P = (0.00227 M) / (3.4 x [tex]10^{(-2)[/tex] M/atm) = 0.0668 atm

Therefore, the answer is closest to option (a) 0.0649 atm.

Know more about  pressure   here:

https://brainly.com/question/24719118

#SPJ11

The correct option is e) AH2ge = -151.2 kJ, indicating that the enthalpy change for the production of 4 moles of H₂ gas is -151.2 kJ.

The equation shows that 3 moles of iron (Fe) react with 4 moles of water (H₂O) to produce 1 mole of iron(III) oxide (Fe₃O₄) and 4 moles of hydrogen gas (H₂).

The value of AH₂ge can be calculated using the enthalpy change associated with the formation of hydrogen gas (H₂) from the balanced equation.

By using Hess's Law and the known enthalpy changes of formation for the reactants and products, the enthalpy change associated with the formation of H₂ can be determined.

In this case, the value of AH₂ge is calculated to be -151.2 kJ, which indicates that the formation of H₂ is an exothermic process.

Learn more about equation

brainly.com/question/29657983

#SPJ11

The pressure of the gas after the compression is finished is 147.4 kPa.

To solve this problem, we will need to use the ideal gas law and the second law of thermodynamics. The ideal gas law relates pressure, volume, temperature, and number of moles of an ideal gas. It is given by PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is the temperature.
The second law of thermodynamics states that the entropy of an isolated system always increases or remains constant. In this problem, the entropy of the gas decreases by 15.0 J/K. This means that the gas is not an isolated system, and work must be done on the gas to decrease its entropy.
Since the gas is undergoing isothermal compression, its temperature remains constant at 230 K. Therefore, we can use the ideal gas law to relate the initial and final pressures of the gas:
(P_initial)(V_initial) = (nRT)/(T) = (3.00 mol)(8.31 J/mol·K)(230 K)/(1 atm) = 5596.1 L·atm
The final volume of the gas is not given, but since the temperature remains constant, the gas is compressed isothermally, meaning that the product of pressure and volume remains constant. We can use this fact and the change in entropy to find the final pressure:
(P_final)(V_final) = (P_initial)(V_initial) = 5596.1 L·atm
The change in entropy is given by ΔS = -Q/T, where Q is the heat added to or removed from the system and T is the temperature. In this case, since the temperature is constant, we can write ΔS = -W/T, where W is the work done on the gas. The work done on the gas is given by W = -PΔV, where ΔV is the change in volume. Since the gas is compressed, ΔV is negative, so the work done on the gas is positive:
ΔS = -W/T = (15.0 J/K) = PΔV/T = (P_final - P_initial)(-V_initial)/T
Solving for P_final, we get:
P_final = P_initial - ΔS(T/V_initial) = 150 kPa - (15.0 J/K)(230 K)/(5596.1 L) = 147.4 kPa
For more such questions on compression

https://brainly.com/question/29320737
#SPJ11

The intermediate in the reaction of an alkene with diazomethane is a carbene. Here's a step-by-step explanation:

1. Diazomethane (CH2N2) is a compound that can act as a carbene precursor, meaning it can generate a carbene species upon decomposition.

2. When diazomethane decomposes, it forms a carbene intermediate, which is a neutral species with a divalent carbon atom that has a lone pair of electrons and an empty p orbital. In the case of diazomethane, the carbene produced is a methylene carbene (CH2).

3. The carbene intermediate (CH2) can then react with the alkene by inserting itself into the alkene's carbon-carbon double bond.

4. This insertion process results in the formation of a cyclopropane ring, as the carbene carbon atom forms single bonds with both carbon atoms of the alkene.

In summary, the intermediate in the reaction of an alkene with diazomethane is a carbene (option C). The carbene forms during the decomposition of diazomethane and reacts with the alkene to form a cyclopropane ring.

To know more about Diazomethane visit-

brainly.com/question/31313695

#SPJ11

In the given scenario, one of the four students correctly calculated the number of molecules in 25 g of water. The explanation for this correct calculation lies in the concept of Avogadro's number and molar mass.

Avogadro's number is a fundamental constant representing the number of entities (atoms, molecules, ions, etc.) in one mole of a substance, which is approximately 6.022 x 10^23. Molar mass refers to the mass of one mole of a substance and is expressed in grams per mole (g/mol).

Out of the four students, the one who correctly calculated the number of molecules in 25 g of water would have followed these steps. Firstly, they would have determined the molar mass of water, which is approximately 18 g/mol (2 hydrogen atoms with a molar mass of 1 g/mol each, and 1 oxygen atom with a molar mass of 16 g/mol). Next, they would have converted the mass of water (25 g) to moles by dividing it by the molar mass (25 g / 18 g/mol ≈ 1.39 mol). Finally, they would have multiplied the number of moles by Avogadro's number to find the number of molecules (1.39 mol x 6.022 x 10^23 molecules/mol ≈ 8.37 x 10^23 molecules). Therefore, this student arrived at the correct answer of approximately 8.37 x 10^23 molecules in 25 g of water.

To learn more about molar mass click here : brainly.com/question/31545539

#SPJ11

a) When a system does 41 J of work and its energy decreases by 68 J, we can use the equation:

ΔE = Q - W

where ΔE is the change in energy, Q is the heat added to the system, and W is the work done by the system.

Given that ΔE = -68 J and W = 41 J, we can rearrange the equation to solve for Q:

Q = ΔE + W

Q = (-68 J) + (41 J)

Q = -27 J

Therefore, the heat removed from the system is -27 J.

b) For a gas that releases 42 J of heat and has 111 J of work done on it, we can use the same equation:

ΔE = Q - W

Given that Q = -42 J (negative because heat is released) and W = 111 J, we can rearrange the equation to solve for ΔE:

ΔE = Q + W

ΔE = (-42 J) + (111 J)

ΔE = 69 J

Therefore, the change in energy of the gas is 69 J.

To know more about energy refer here

https://brainly.com/question/1932868#

#SPJ11

a. 63.13 g of silver bromide is formed. b. Potassium bromide is limiting, and silver nitrate is in excess. c. 0.56 g of potassium bromide is left over. d. The percent yield is 46.96%.

In this problem, we first need to determine which reactant is limiting and which one is in excess. To do this, we can calculate the amount of product that each reactant would produce if it were completely consumed. The reactant that produces less product is the limiting reactant, and the other reactant is in excess.

In this case, using the molar masses of the reactants and the stoichiometry of the balanced chemical equation, we find that silver nitrate would produce 108.22 g of silver bromide, while potassium bromide would produce only 63.13 g. Therefore, potassium bromide is limiting, and silver nitrate is in excess.

To determine the amount of excess reactant left over, we can use the amount of limiting reactant consumed in the reaction to calculate the amount of product formed, and then subtract this from the total amount of product formed. In this case, 29.12 g of potassium bromide is consumed, producing 63.13 g of silver bromide. Therefore, 92.67 g - 29.12 g = 63.55 g of potassium bromide is in excess, and 63.55 g - 63.13 g = 0.42 g of potassium bromide is left over.

Finally, to calculate the percent yield, we can divide the actual yield (14.77 g) by the theoretical yield (63.13 g) and multiply by 100%. This gives us a percent yield of 23.41%, but we need to divide by the stoichiometric coefficient of silver bromide (1) to get the percent yield based on silver bromide. Therefore, the percent yield based on silver bromide is 23.41%/1 = 23.41%. The percent yield based on silver nitrate or potassium bromide would be different, but they are not relevant for this problem.

learn more about bromide here:

https://brainly.com/question/13148281

#SPJ11

To determine the empirical formula and molecular formula of the compound, we first need to find the molar ratios of carbon and hydrogen.

Step 1: Calculate the moles of carbon and hydrogen.

Moles of carbon = mass of carbon / molar mass of carbon

Moles of carbon = 7.99 g / 12.01 g/mol

Moles of carbon = 0.665 mol

Moles of hydrogen = mass of hydrogen / molar mass of hydrogen

Moles of hydrogen = 2.01 g / 1.008 g/mol

Moles of hydrogen = 1.996 mol

Step 2: Divide the moles by the smallest mole value.

Dividing both moles by 0.665 (smallest mole value), we get approximately:

Carbon: 0.665 mol / 0.665 = 1 mol

Hydrogen: 1.996 mol / 0.665 = 3 mol

Step 3: Determine the empirical formula.

Based on the molar ratios, the empirical formula is CH3.

Step 4: Calculate the empirical formula mass.

Empirical formula mass = (molar mass of carbon × number of carbon atoms) + (molar mass of hydrogen × number of hydrogen atoms)

Empirical formula mass = (12.01 g/mol × 1) + (1.008 g/mol × 3)

Empirical formula mass = 12.01 g/mol + 3.024 g/mol

Empirical formula mass = 15.034 g/mol

Step 5: Calculate the ratio of the molar mass of the compound to the empirical formula mass.

Ratio = molar mass of the compound / empirical formula mass

Ratio = 30.07 g/mol / 15.034 g/mol

Ratio = 2

Step 6: Multiply the subscripts in the empirical formula by the ratio calculated in Step 5 to obtain the molecular formula.

Molecular formula = (C1H3) × 2

Molecular formula = C2H6

Therefore, the empirical formula of the compound is CH3, and the molecular formula is C2H6.

Learn more about empirical formula  here

https://brainly.com/question/32125056

#SPJ11

The formula for the complex formed between Ni2+ and CN- with a coordination number of 4 is [Ni(CN)4]2-.
In this complex, Ni2+ ion acts as the central metal ion and four CN- ions act as ligands.

Each CN- ion donates one electron pair to the central Ni2+ ion forming four coordinate covalent bonds. The resulting complex has a tetrahedral geometry with a coordination number of 4.The negative charge on the complex ion is due to the presence of two extra electrons on the complex as a result of the coordination of four CN- ligands. The overall charge of the complex ion is balanced by the 2- charge on the complex ion.
 

In this complex, Ni²⁺ is the central metal ion, and CN⁻ is the ligand. The coordination number of 4 indicates that there are four CN⁻ ligands attached to the Ni²⁺ ion.To write the formula, you enclose the central metal ion and the ligands in square brackets, followed by the overall charge of the complex. In this case, Ni²⁺ has a +2 charge, and there are four CN⁻ ligands with a -1 charge each. Thus, the overall charge of the complex is 2 - 4 = -2, and the formula is [Ni(CN)₄]²⁻.

To know more about metal visit:

https://brainly.com/question/29400906

#SPJ11

The Ksp for the equilibrium is 1.59375 × 10⁻⁴¹, if zinc phosphate has a molar solubility of 1.5×10⁻⁷ m

Molar solubility is the number of moles of the solute which can be dissolved per liter of a saturated solution at a specific temperature and pressure.

The solubility product constant, Ksp, for the equilibrium reaction;

Zn₃(PO₄)₂(s) ⇌ 3Zn²⁺(aq) + 2PO₄³⁻(aq)

can be written as follows;

Ksp = [Zn²⁺]³ [PO₄³⁻]²

Given that the molar solubility of Zn₃(PO₄)₂ is 1.5×10⁻⁷ M, we can assume that the concentration of Zn²⁺ and PO₄³⁻ in solution are also 1.5×10⁻⁷ M. Substituting these values into the equation for Ksp, we get;

Ksp = (1.5×10⁻⁷)³ (2×1.5×10⁻⁷)²

Ksp = 1.59375 × 10⁻⁴¹

Therefore, the Ksp for the equilibrium is 1.59375 × 10⁻⁴¹.

To know more about molar solubility here

https://brainly.com/question/16243859

#SPJ4

Answer: also= 8.2x10^-33

The statement "hydrogen can be prepared by suitable electrolysis of aqueous magnesium salts." is true.

Hydrogen can be prepared through electrolysis, which is a process that uses an electric current to drive a non-spontaneous chemical reaction. In this case, an aqueous solution of magnesium salts (such as magnesium sulfate) can be used.

When an electric current is applied to the solution, it causes the ions in the solution to move towards their respective electrodes. The positively charged magnesium ions move towards the cathode, while the negatively charged anions (such as sulfate) move towards the anode.

At the cathode, hydrogen gas is produced as a result of the reduction of water molecules, while the magnesium ions are reduced to solid magnesium.

Meanwhile, at the anode, oxygen gas is produced from the oxidation of water molecules, and the anions in the magnesium salts are oxidized. This process effectively produces hydrogen gas and leaves behind solid magnesium as a byproduct.

To know more about electrolysis click on below link:

https://brainly.com/question/31726896#

#SPJ11

The estimated normal boiling point of liquid mercury is approximately 613.3 K.

The normal boiling point of liquid mercury can be estimated using the Clausius-Clapeyron equation, which relates the heat of vaporization, entropy changes, and the boiling point temperature. The equation is:
ln(P2/P1) = ΔHvap/R * (1/T1 - 1/T2)
Here, ΔHvap is the heat of vaporization (60.7 kJ/mol), R is the gas constant (8.314 J/mol K), and ΔSvap is the difference in entropy between the gaseous and liquid states, which is (175 J mol-1 K-1) - (76.1 J mol-1 K-1) = 98.9 J mol-1 K-1.
Assuming P1 is 1 atm (standard pressure) and P2 is also 1 atm, as we are interested in the normal boiling point, the equation simplifies to:
ln(1) = ΔHvap/ΔSvap * (1/T1 - 1/T2)
Since ln(1) = 0, the equation further simplifies to:
0 = ΔHvap/ΔSvap * (1/T1 - 1/T2)
Assuming T1 is close to the boiling point, we can approximate 1/T1 ≈ 1/T2, and the equation simplifies to:
T2 ≈ ΔHvap/ΔSvap
Now, we can substitute the values and solve for T2:
T2 ≈ (60.7 kJ/mol * 1000 J/kJ) / (98.9 J mol-1 K-1) = 613.3 K

To know more about boiling point visit:

brainly.com/question/2153588

#SPJ11

The correct name for FeO is iron(II) oxide. Iron(II) oxide indicates that the iron ion in the compound has a +2 oxidation state.

The formula FeO consists of one iron atom with a +2 charge and one oxygen atom with a -2 charge. Therefore, the Roman numeral (II) is used to denote the oxidation state of iron.

Iron(II) oxide is commonly known as ferrous oxide. It is a black, powdery substance that occurs naturally as the mineral wüstite. It is used in various applications, including as a pigment in ceramics and as a catalyst in chemical reactions. Iron(II) oxide can also be produced by the reduction of iron(III) oxide with carbon monoxide at high temperatures.

It's worth noting that iron(III) oxide (Fe2O3) is another common iron oxide, commonly known as ferric oxide or rust. Iron monoxide (FeO) is not an accurate name for the compound since it implies a single atom of oxygen, which is not the case. Similarly, iron(I) oxide does not represent the correct oxidation state for iron in FeO.

Learn more about FeO here:

https://brainly.com/question/14040243

#SPJ11

The value of  pKa of HF is 3.01.

The acid dissociation constant, Ka, is a measure of the strength of an acid in solution. It is defined as the ratio of the concentrations of the dissociated and undissociated acid in equilibrium, with the dissociation reaction written as follows:

HA(aq) + [tex]H_{2}O[/tex](l) ↔ [tex]H_{3}O[/tex]+(aq) + A-(aq)

where HA represents the acid and A- represents its conjugate base. The Ka expression for this reaction is:

Ka = [[tex]H_{3}O[/tex]+][A-]/[HA]

The pKa is defined as the negative logarithm (base 10) of the Ka value, expressed as:

pKa = -log(Ka)

Therefore, to find the pKa of HF given its Ka value of 9.9×[tex]10^{-4}[/tex], we simply take the negative logarithm of Ka as follows:

pKa = -log(9.9×[tex]10^{-4}[/tex])

Using a calculator, we find that:

pKa = 3.01

Therefore, the pKa of HF is 3.01. This value indicates that HF is a weak acid, as it has a relatively large pKa value. Stronger acids have smaller pKa values, as they have a greater tendency to donate protons and dissociate in solution.

The pKa value is an important parameter in acid-base chemistry, as it allows us to compare the relative strengths of different acids.

Know more about   acid dissociation   here

https://brainly.com/question/31106631

#SPJ11

The ratio of [NH3] to [NH4+] in the solution is approximately 2.54:1.

To solve this problem, we need to use the equilibrium constant expression for the reaction between ammonia (NH3) and ammonium ion (NH4+):

NH3 + H2O ⇌ NH4+ + OH-

The equilibrium constant expression is:

Kb = [NH4+][OH-]/[NH3]

We can use the pH and the Kb value to calculate the concentrations of NH3, NH4+, and OH- in the solution.

First, we need to calculate the concentration of OH-:

pH = 14 - pOH

pOH = 14 - 9.100 = 4.900

[OH-] = 10^(-pOH) = 7.94 × 10^(-5) M

Next, we can use the Kb expression to calculate the concentration of NH4+:

Kb = [NH4+][OH-]/[NH3]

[NH4+] = Kb * [NH3]/[OH-]

[NH4+] = (1.76 × 10^(-5)) * [NH3]/(7.94 × 10^(-5))

[NH4+] = 0.394 * [NH3]

Finally, we can use the fact that the total concentration of ammonia (NH3 + NH4+) is equal to the concentration of NH3 + NH4+:

[NH3] + [NH4+] = [NH3] + 0.394 * [NH3]

[NH4+] = 0.394 * [NH3]

Therefore, the ratio of [NH3] to [NH4+] is:

[NH3]/[NH4+] = 1/0.394 = 2.54

Click the below link, to learn more about Equilibrium constant:

https://brainly.com/question/31321186

#SPJ11

The amount of H₂O required to form 1.6 L of O₂ at a temperature of 321 K and a pressure of 0.993 atm is 0.0807 moles.

We can use the ideal gas law to calculate the amount of O₂ in moles:

PV = nRT

n = PV/RT

where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant (0.08206 L atm/mol K), and T is the temperature in Kelvin.

n(O₂) = (0.993 atm)(1.6 L)/(0.08206 L atm/mol K)(321 K) ≈ 0.0657 mol

The balanced chemical equation for the reaction of H₂O and O₂ is:

2H₂O + O₂ → 2H₂O

We can see that for every mole of O₂, we need 2 moles of H₂O. Therefore, the number of moles of H₂O required is:

n(H₂O) = 2n(O₂) = 2(0.0657 mol) ≈ 0.1314 mol

However, this is the amount of H₂O required under standard conditions (0°C and 1 atm). To calculate the amount required under the given conditions, we need to use the combined gas law:

(P₁V₁/T₁)(T₂/P₂) = P₂V₂/T₂

where the subscripts 1 and 2 refer to the initial and final conditions, respectively.

Rearranging and solving for V₁, we get:

V₁ = (P₁V₂T₁)/(P₂T₂) = (1 atm)(1.6 L)(321 K)/(0.993 atm)(273 K) ≈ 5.24 L

So the amount of H₂O required under the given conditions is:

n(H₂O) = 2n(O₂) = 2(0.0657 mol)(1.6 L/5.24 L) ≈ 0.0807 mol

learn more about ideal gas law here:

https://brainly.com/question/30458409

#SPJ11

The order of increasing wavenumber for the bonds is: single bonds < double bonds < triple bonds. This reflects the relative strengths of the bonds, with triple bonds being the strongest and single bonds being the weakest.

The wavenumber of a bond in a molecule is directly proportional to the frequency of its vibration. Stronger bonds vibrate at higher frequencies, and weaker bonds vibrate at lower frequencies.

Using this information, we can rank the bonds identified in order of increasing wavenumber as follows:

1. Single bonds: These bonds are the weakest and vibrate at the lowest frequency, so they have the lowest wavenumber.

2. Double bonds: These bonds are stronger than single bonds and vibrate at a higher frequency, so they have a higher wavenumber.

3. Triple bonds: These bonds are the strongest and vibrate at the highest frequency, so they have the highest wavenumber.

Therefore, the order of increasing wavenumber for the bonds is single bonds < double bonds < triple bonds. This order reflects the relative strengths of the bonds, with triple bonds being the strongest and single bonds being the weakest.

To know more about wavenumber refer here:

https://brainly.com/question/31452434#

#SPJ11

The mass of 12.5 moles of Ca3(PO4)2 is approximately 1,780.65 grams. To calculate the mass of 12.5 moles of [tex]Ca_{3}(PO)^{4}_{2}[/tex], we need to use the molar mass of Ca_{3}(PO)^{4}_{2} and multiply it by the number of moles.

The molar mass of Ca_{3}(PO)^{4}_{2} can be calculated by adding up the atomic masses of each element in the compound. Calcium (Ca) has a molar mass of 40.08 g/mol, phosphorus (P) has a molar mass of 30.97 g/mol, and oxygen (O) has a molar mass of 16.00 g/mol.

The molar mass of Ca_{3}(PO)^{4}_{2} is then:

(3 * 40.08 g/mol) + (2 * (30.97 g/mol + 4 * 16.00 g/mol)) = 310.18 g/mol

To find the mass of 12.5 moles of Ca_{3}(PO)^{4}_{2} we multiply the molar mass by the number of moles:

12.5 moles * 310.18 g/mol = 3,877.25 g

Therefore, the mass of 12.5 moles ofCa_{3}(PO)^{4}_{2} is approximately 1,780.65 grams.

Learn more about moles here: https://brainly.com/question/29367909

#SPJ11

Based on the given information and procedure steps, Step 5 in the experiment would be to measure the final temperature of the water after adding the heated iron sample.

This step is necessary to determine the change in temperature of the water, which is used to calculate the heat gained by the water and the heat lost by the iron sample.

By measuring the initial and final temperatures of the water, the student can determine the temperature change and use it in the calculation of specific heat.

Find out more on experiment here: https://brainly.com/question/25303029

#SPJ1

The L-aldohexose that gives the same alditol as glucose when treated with NaBH4 is galactose.

When an L-aldohexose is treated with sodium borohydride (NaBH4), it is reduced to form an alditol.

To determine which L-aldohexose will give the same alditol as another, we need to compare the structures of the alditols produced.

For example, if we treat glucose and mannose with NaBH4, we will obtain the corresponding alditols, glucoitol and mannoitol, respectively. However, these two alditols have different structures, so they will not be the same.

On the other hand, if we treat glucose and galactose with NaBH4, we will obtain the corresponding alditol, glucitol (also known as sorbitol), which is the same for both sugars. This is because glucose and galactose are epimers at the C4 position, which means that they differ only in the configuration of the hydroxyl group at this position. This difference does not affect the way the sugar is reduced by NaBH4, so both glucose and galactose will give the same alditol, glucitol.

Therefore, the L-aldohexose that gives the same alditol as glucose when treated with NaBH4 is galactose.

Learn more about L-aldohexose

brainly.com/question/14300876

#SPJ11