3.2.2 Quiz: Energy of Chemical Relons Question 9 of 10 The energy diagram shows the changes in energy during a chemical reaction Which statement best describes the total energy change of the system? Potential energy Reaction progress​

Answer:

Explanation:

This is a displacement vector since it is given in terms of a distance (meters, to be specific). The way you find the x-component is:

[tex]V_x=Vcos\theta[/tex] which means you multiply the magnitude (length) of the vector times the cos of the direction (the angle):

[tex]V_x=2.5cos(64)[/tex] to get

1.1 m, choice B.

Answer:

P.E=mgh 1020=60×10h 1020=600h 1.7kg

Answer:

[tex]A \to rad/s[/tex]

[tex]B \to rad/s^3[/tex]

Explanation:

[tex]\omega_z(t)=A + Bt^2[/tex]

Required

The units of A and B

From the question, we understand that:

[tex]\omega_z(t) \to rad/s[/tex]

This implies that each of [tex]A[/tex] and [tex]Bt^2[/tex] will have the same unit as [tex]\omega_z(t)[/tex]

So, we have:

[tex]A \to rad/s[/tex]

[tex]Bt^2 \to rad/s[/tex]

The unit of t is (s); So, the expression becomes

[tex]B * s^2 \to rad/s[/tex]

Divide both sides by [tex]s^2[/tex]

[tex]B \to \frac{rad/s}{s^2}[/tex]

[tex]B \to rad/s^3[/tex]

Answer:

13

Explanation:

6+4=10s

50+35=85

av speed=85/10=8.5m/s

Answer:

La tensión es 85.3 N.

Explanation:

Cuando el objeto gira en dirección horizontal, la sumatoria de fuerzas se puede calcular usando la segunda ley de Newton:  

[tex] \Sigma F_{x} =ma_{c} [/tex]

[tex] T = ma_{c} [/tex]  

Dado que el movimiento es horizontal, el peso (que está en el eje y) no contribuye en la sumatoria de fuerzas en el eje x. Por lo que la única fuerza actuando sobre el objeto en la dirección del movimiento es la tensión.  

En donde:                                          

m: es la masa del objeto = 200 g = 0.200 kg

[tex]a_{c}[/tex]: es la aceleración centrípeta

La aceleración centrípeta viene dada por:  

[tex]a_{c} = \omega^{2} r[/tex]

En donde:    

ω: es la velocidad angular del objeto = 3 rev/s

r: es el radio = 1.20 m

Entonces, la tensión es:

[tex]T = m\omega^{2} r = 0.200 kg(3\frac{rev}{s}*\frac{2\pi rad}{1 rev})^{2}*1.20 m = 85.3 N[/tex]

Por lo tanto, la tensión es 85.3 N.  

Espero que te sea de utilidad!                                                                          

Explanation:

hope it helps thanks

pls mark me as brainliest

Answer:

Explanation:

HOPE IT HELPS

Answer:

55.128kg

Explanation:

P= m×v

or, m=P/v = 430/7.8 = 55.128 kg

Answer:

55.13 kg

Explanation:

Momentum, P = m*v

P = m*v

m = P/v

m = 430/7.8

m = 55.13 kg

Experimental evidence that supports the new idea

Answer:

La fuerza es la causa que provoca cualquier cambio en el movimiento o la geometría de los cuerpos. Un cuerpo puede aceptar muchas fuerzas al mismo tiempo, cuyo resultado será en cada punto una fuerza recomendada y un par recomendado. Cuando estas fuerzas se neutralizan entre sí, se dice que el cuerpo está en un estado de equilibrio.

En lo que respecta a los cuerpos libres, la fuerza es generalmente la causa de un cambio en su estado cinético, es decir, que los acelera o ralentiza. Esto también se aplica a su rotación, que puede acelerarse o desacelerarse. Para los cuerpos que no son libres de moverse en todas las formas, es decir, aquellos que están suspendidos en algún lugar y solo pueden moverse alrededor de un punto o eje o en una trayectoria predeterminada, así como aquellos que aplican fuerzas de fricción o reacciones generales de apoyo, nosotros reducir las fuerzas en puntos característicos. En el caso de los cuerpos no libres, la fuerza es la causa que provoca su movimiento o movilidad en relación con sus puntos de apoyo o conexión, o la que provoca su intenso estado, presión o deformación. La inercia de un cuerpo libre también permite que el cuerpo se someta a una tensión, presión o deformación intensas cuando se le aplican las fuerzas correspondientes.

Answer:

The beat frequency is 30 Hz

Explanation:

Given;

velocity of the two sound waves, v = 343 m/s

wavelength of the first wave, λ₁ = 5.72 m

wavelength of the second wave, λ₂ = 11.44 m

The frequency of the first wave is calculated as follows;

F₁ = v/λ₁

F₁ = 343 / 5.72

F₁ = 59.97 HZ

The frequency of the second wave is calculated as follows;

F₂ = v/λ₂

F₂ = 343 / 11.44

F₂ = 29.98 Hz

The beat frequency is calculated as;

Fb = F₁ - F₂

Fb =  59.97 HZ - 29.98 Hz

Fb = 30 Hz

Explanation:

SI system is advantageous over mks system because SI system is intended to extend by its definition and has 7 base which is more than MKS system .

Hope it is helpful to you ☺️

Answer:

Explanation:

SI system is advantageous over mks system because SI system is intended to extend by its definition and has 7 base which is more than MKS system.

Answer: it is B

gravitational attraction between the sun and Venus

Explanation:

Answer:

chemists say that equilibrium lies to the right as written, favoring the formation of products. An example is the reaction between H2 and Cl2 to produce HCl, which has an equilibrium constant of 1.6×1033 at 300 K

I suppose this is right?

Explanation:

Answer:

0.675

Explanation:

hope you get it right

Answer:

[tex]0.675\:\mathrm{s}[/tex]

Explanation:

Displacement can be given as [tex]\Delta x=v_x\cdot t[/tex]

Substituting given values, we have:

[tex]27=40t,\\t=\frac{27}{40}=\boxed{0.675\:\mathrm{s}}[/tex]

Answer: (A) Science is often used to make new technology that people can sell.

Explanation:

Scientific discoveries serve as a basis for industrial developments of new technologies. That development is very often driven by economical considerations. Viable, well-developed, well-implemented solutions sell.

The history of industrialized world is one treasure trove of examples of (A) (think of your iPhone X selling for $1000 a pop)

Explanation:

Answer: I dont know Im srry diagram

Explanation:

Diagram baby + baby Diagram = Diagram baby Diagram

Answer:

Nebulae contribute more to stellar formation than other regions because:

Explanation:

A.They have an unlimited supply of hydrogen.

B. They are believed to be rich in hydrogen and helium.

C. They have a three strong gravitational pull.

This are the reasons that Nebulae contribute more to stellar formation than other regions.

Answer:

Acceleration. When an external force acts on an object, the change in the object's motion will be directly related to its mass. This change in motion, known as acceleration, depends upon the object's mass and the strength of the external force.

Answer:

In a truss bridge, two long - usually straight members known as chords - form the top and bottom; they are connected by a web of vertical posts and diagonals. The bridge is supported at the ends by abutments and sometimes in the middle by piers.

Explanation:

Hope it helps mark as brainliest pls

:)

Answer:

R = 1.71 ohms

Explanation:

Two resistors are connected in parallel. There equivalent resistance is given by :

[tex]\dfrac{1}{R}=\dfrac{1}{R_1}+\dfrac{1}{R_2}[/tex]

Put all the values,

[tex]\dfrac{1}{R}=\dfrac{1}{3}+\dfrac{1}{4}\\\\R=1.71\ \Omega[/tex]

So, the resultant resistance of the circuit is equal to 1.71 ohms.

Answer:

Explanation:

The formula for the magnitude of a vector is

[tex]B_{mag}=\sqrt{(-1.33)^2+(2.81)^2}[/tex] and then round to the hundredths place:

3.11 m. Since we are in Q2, we can also find the direction of this vector:

[tex]tan^{-1}(\frac{2.81}{-1.33})=-64.7[/tex] but since we are in Q2, we add 180 degrees to the result, getting the angle to be 115.3

Answer:115.33

Explanation:

Answer:

Concave mirrors reflect light to a central point (converging)

Suppose the source is to the left of the  mirror in  question.

Parallel rays into the mirror are always reflected towards the focal point.

In the case of a concave mirror the real parallel rays pass thru the focal point.

If the mirror is convex the rays will diverge to the left and act as if they were emanating from the focal point to the right of the mirror.

Answer:

Solon,

total mass (kg)= 100kg

height (h)= 25m

acceleration due to gravity = 9.8m/s²

so,

work done =m*g*h

= 100*9.8*25

= 24,500 joule

The work done by the crane in lifting the given mass of concrete to the given vertical height is 24500 Joules.

Work done is simply defined as the energy transfer that takes place when an object is either pushed or pulled over a certain distance by an external force. It is expressed as;

W = F × d

Where f is force applied and d is distance travelled.

Note that, the concrete is lifted upward, Weight of the concrete becomes mass multiply by acceleration due to gravity. g = 9.8m/s²

F = Weight = mg

Given that;

W = F × d

W = (mg) × d

W = ( 100kg × 9.8m/s² ) 25m

W = 980kgm/s² × 25m

W = 24500kgm²/s²

W = 24500J

Therefore, the work done by the crane in lifting the given mass of concrete to the given vertical height is 24500 Joules.

Learn more about work done here: brainly.com/question/26115962

#SPJ2

Answer:

In the first one circle : luster

second circle: atsuete seeds

third: dentures

Explanation:

Well I ain’t sure

Answer:

ਹੈਲੋ, ਇੰਡੀਆ ਦਾ ਆਪਣਾ ਵੀਡੀਓ ਐਪ - ਰੋਪੋਸੋ ਤੇ Manjeet Warval ਦਾ ਵੀਡੀਓ ਦੇਖੋ | ਨਾਲ ਹੀ PM ਮੋਦੀ ਦੇ 'ਵੋਕਲ ਫ਼ਾਰ ਲੋਕਲ' ਮੋਹਿਮ ਨੂੰ ਸਫ਼ਲ ਬਣਾਉਣ ਲਈ ਰੋਪੋਸੋ ਤੇ 5 ਕਰੋੜ ਤੋਂ ਜ਼ਿਆਦਾ ਭਾਰਤੀਆਂ ਦੇ ਨਾਲ ਜੋੜੋ| ਹੁਣੇ ਰੋਪੋਸੋ ਐਪ ਡਾਊਨਲੋਡ ਕਰੋ ਅਤੇ 100 ਕੋਇਨਜ਼ ਪਾਣ ਲਈ 24 ਘੰਟੇ ਦੇ ਅੰਦਰ ਸਾਇਨ ਅੱਪ ਕਰੋ|ਹੈਲੋ, ਇੰਡੀਆ ਦਾ ਆਪਣਾ ਵੀਡੀਓ ਐਪ - ਰੋਪੋਸੋ ਤੇ Manjeet Warval ਦਾ ਵੀਡੀਓ ਦੇਖੋ | ਨਾਲ ਹੀ PM ਮੋਦੀ ਦੇ 'ਵੋਕਲ ਫ਼ਾਰ ਲੋਕਲ' ਮੋਹਿਮ ਨੂੰ ਸਫ਼ਲ ਬਣਾਉਣ ਲਈ ਰੋਪੋਸੋ ਤੇ 5 ਕਰੋੜ ਤੋਂ ਜ਼ਿਆਦਾ ਭਾਰਤੀਆਂ ਦੇ ਨਾਲ ਜੋੜੋ| ਹੁਣੇ ਰੋਪੋਸੋ ਐਪ ਡਾਊਨਲੋਡ ਕਰੋ ਅਤੇ 100 ਕੋਇਨਜ਼ ਪਾਣ ਲਈ 24 ਘੰਟੇ ਦੇ ਅੰਦਰ ਸਾਇਨ ਅੱਪ ਕਰੋ|ਹੈਲੋ, ਇੰਡੀਆ ਦਾ ਆਪਣਾ ਵੀਡੀਓ ਐਪ - ਰੋਪੋਸੋ ਤੇ Manjeet Warval ਦਾ ਵੀਡੀਓ ਦੇਖੋ | ਨਾਲ ਹੀ PM ਮੋਦੀ ਦੇ 'ਵੋਕਲ ਫ਼ਾਰ ਲੋਕਲ' ਮੋਹਿਮ ਨੂੰ ਸਫ਼ਲ ਬਣਾਉਣ ਲਈ ਰੋਪੋਸੋ ਤੇ 5 ਕਰੋੜ ਤੋਂ ਜ਼ਿਆਦਾ ਭਾਰਤੀਆਂ ਦੇ ਨਾਲ ਜੋੜੋ| ਹੁਣੇ ਰੋਪੋਸੋ ਐਪ ਡਾਊਨਲੋਡ ਕਰੋ ਅਤੇ 100 ਕੋਇਨਜ਼ ਪਾਣ ਲਈ 24 ਘੰਟੇ ਦੇ ਅੰਦਰ ਸਾਇਨ ਅੱਪ ਕਰੋ|ਹੈਲੋ, ਇੰਡੀਆ ਦਾ ਆਪਣਾ ਵੀਡੀਓ ਐਪ - ਰੋਪੋਸੋ ਤੇ Manjeet Warval ਦਾ ਵੀਡੀਓ ਦੇਖੋ | ਨਾਲ ਹੀ PM ਮੋਦੀ ਦੇ 'ਵੋਕਲ ਫ਼ਾਰ ਲੋਕਲ' ਮੋਹਿਮ ਨੂੰ ਸਫ਼ਲ ਬਣਾਉਣ ਲਈ ਰੋਪੋਸੋ ਤੇ 5 ਕਰੋੜ ਤੋਂ ਜ਼ਿਆਦਾ ਭਾਰਤੀਆਂ ਦੇ ਨਾਲ ਜੋੜੋ| ਹੁਣੇ ਰੋਪੋਸੋ ਐਪ ਡਾਊਨਲੋਡ ਕਰੋ ਅਤੇ 100 ਕੋਇਨਜ਼ ਪਾਣ ਲਈ 24 ਘੰਟੇ ਦੇ ਅੰਦਰ ਸਾਇਨ ਅੱਪ ਕਰੋ|ਹੈਲੋ, ਇੰਡੀਆ ਦਾ ਆਪਣਾ ਵੀਡੀਓ ਐਪ - ਰੋਪੋਸੋ ਤੇ Manjeet Warval ਦਾ ਵੀਡੀਓ ਦੇਖੋ | ਨਾਲ ਹੀ PM ਮੋਦੀ ਦੇ 'ਵੋਕਲ ਫ਼ਾਰ ਲੋਕਲ' ਮੋਹਿਮ ਨੂੰ ਸਫ਼ਲ ਬਣਾਉਣ ਲਈ ਰੋਪੋਸੋ ਤੇ 5 ਕਰੋੜ ਤੋਂ ਜ਼ਿਆਦਾ ਭਾਰਤੀਆਂ ਦੇ ਨਾਲ ਜੋੜੋ| ਹੁਣੇ ਰੋਪੋਸੋ ਐਪ ਡਾਊਨਲੋਡ ਕਰੋ ਅਤੇ 100 ਕੋਇਨਜ਼ ਪਾਣ ਲਈ 24 ਘੰਟੇ ਦੇ ਅੰਦਰ ਸਾਇਨ ਅੱਪ ਕਰੋ|

Answer:

the fish wilil appear to be purple

Explanation:

Answer: Pure-Tone Audiometry

Explanation:

Pure-tone audiometry refers to the behavioral test that is used in the measurement of hearing sensitivity. Pure tone audiometry an hearing test that's used in the identification of an individuals hearing threshold levels which is used in determining the degree of a hearing loss and then a basis for diagnosis will be provided.

Therefore, Pure-Tone Audiometry is a procedure that's used for measuring hearing sensitivity at certain frequencies using pure tones presented through an oscillator placed on the forehead or mastoid bone of the listener.