2hbr(g)h2(g) br2(l) using standard absolute entropies at 298k, calculate the entropy change for the system when 1.83 moles of hbr(g) react at standard conditions. s°system = j/k

To calculate the mass of hydrogen gas produced when 2.2g of zinc (Zn) reacts with excess aqueous hydrochloric acid (HCl), we need to consider the balanced chemical equation for the reaction and the molar ratios.

The balanced chemical equation for the reaction is:

Zn + 2HCl → ZnCl2 + H2

From the equation, we can see that 1 mole of zinc reacts with 2 moles of hydrochloric acid to produce 1 mole of hydrogen gas.

To calculate the mass of hydrogen gas produced, we can use the following steps:

1. Convert the given mass of zinc to moles using its molar mass.

2. Use the mole ratio between zinc and hydrogen gas from the balanced equation.

3. Calculate the moles of hydrogen gas produced.

4. Convert the moles of hydrogen gas to grams using its molar mass.

By following these steps and using the appropriate values, we can find the mass of hydrogen gas produced from the given mass of zinc.To

To learn more about mass click here:brainly.com/question/11954533

#SPJ11

The conversion of 4-pentanoylbiphenyl to 4-pentanylbiphenyl with hydrazine and potassium hydroxide is a reduction . Option c. is correct.

Because it involves the addition of hydrogen atoms to the carbon atoms in the molecule, resulting in a decrease in the oxidation state of the carbons. During the reaction, hydrazine acts as a reducing agent and reduces the ketone group (-[tex]CO^-[/tex]) to an alcohol group (-[tex]CH_2OH[/tex]). This reduction results in the conversion of the carbonyl carbon from sp2 hybridization to sp3 hybridization, resulting in the formation of a new C-H bond.

Therefore, the reaction involves a gain of electrons by the carbonyl carbon, and a reduction of the ketone functional group. There is no simultaneous oxidation of any other species in the reaction.

Therefore, the reaction is a reduction and not an oxidation or a non-redox reaction. Hence, option c. is correct.

To know more about Reduction refer here :

https://brainly.com/question/4222605

#SPJ11

The preferred reaction sequence for the conversion of CH3CH2COH (propionic acid) to CH3CH2CH2OH (1-propanol) is by using (C) BH3 and THF. This reaction is known as hydroboration-oxidation, which is commonly used to convert a carboxylic acid to the corresponding primary alcohol.The use of borane and THF (tetrahydrofuran) as a reagent for hydroboration is preferred because BH3 is highly reactive and tends to polymerize in the absence of a stabilizing solvent. THF acts as a Lewis base and coordinates with BH3 to form a stable BH3-THF complex, which can readily add to the carbonyl group of the carboxylic acid to form the corresponding alkylborane intermediate.

If you need to learn more about reaction sequence, click here

https://brainly.in/question/18527532?referrer=searchResults

#SPJ11

Answer: A 1000 times more

Explanation:

there are 1000 micro grams in 1 milligram.

If you were given a dose of 500 mg instead of 500 µg of a drug, you received 1000 times more of the drug.

If you were given a dose of 500 mg instead of 500 µg, you received 1000 times more of the drug. This is because 1 mg is equal to 1000 µg, so 500 mg is 500,000 µg. Therefore, you received 1000 times more of the drug than the intended dose.

https://brainly.com/question/33443595

#SPJ2

           2Cr₃⁺(aq) + 3Sn₂⁺(aq) → 2Cr(s) + 3Sn(s),

To determine the overall balanced reaction and calculate the standard cell potential,

we need to consider the reduction potentials of both half-reactions and their stoichiometric coefficients.

      Cr₃⁺(aq) + 3 e⁻ → Cr(s) E° = -0.41 V

      Sn₂⁺(aq) + 2 e⁻ → Sn(s) E° = -0.14 V

       2 × (Cr₃⁺ (aq) + 3 e⁻ → Cr(s)) gives us:

          2Cr₃⁺(aq) + 6 e⁻ → 2Cr(s)

       3 × (Sn₂⁺(aq) + 2 e⁻ → Sn(s)) gives us:

            3Sn₂⁺(aq) + 6 e⁻ → 3Sn(s)

Now, we can combine these two half-reactions to form the overall balanced reaction:

      2Cr₃⁺(aq) + 6 e⁻ + 3Sn₂⁺(aq) + 6 e⁻ → 2Cr(s) + 3Sn(s)

Simplifying this equation, we get:

      2Cr₃⁺(aq) + 3Sn₂⁺(aq) → 2Cr(s) + 3Sn(s)

Now, let's calculate the standard cell potential (E°) for the reaction.

       E°(cell) = E°(cathode) - E°(anode)

           (Cr₃⁺(aq) + 3 e⁻ → Cr(s)) is -0.41 V,

           (Sn₂⁺(aq) + 2 e⁻ → Sn(s)) is -0.14 V,

we can substitute these values into the equation:

           E°(cell) = -0.14 V - (-0.41 V)

           E°(cell) = -0.14 V + 0.41 V

           E°(cell) = 0.27 V

           2Cr₃⁺(aq) + 3Sn₂⁺(aq) → 2Cr(s) + 3Sn(s)

Learn more about balanced reaction

brainly.com/question/14258973

#SPJ11

The [tex]K_m[/tex] value would remain at 12 µM after treatment with enough cyanide to lower the enzyme's [tex]V_m_a_x[/tex] to 40 units of activity.

Since cyanide is a non-competitive inhibitor of cytochrome c oxidase, the Km value of the enzyme will remain unchanged after treatment with cyanide. Cyanide is a non-competitive inhibitor of cytochrome c oxidase, which means that it binds to the enzyme at a site other than the active site, and does not directly interfere with substrate binding.

Therefore, we can use the Michaelis-Menten equation to solve for the  [tex]K_m[/tex]value:

[tex]V_m_a_x[/tex] = ([tex]V_m_a_x[/tex] / [tex]K_m[/tex]) [S] +[tex]V_m_a_x[/tex]

Rearranging the equation, we get:

[tex]K_m[/tex] = ([S] ([tex]V_m_a_x[/tex]/40)) - [S]

We know that [S] = 12 µM and [tex]V_m_a_x[/tex] = 40 units of activity. Plugging in these values, we get:

[tex]K_m[/tex] = (12 µM x 40 units of activity/40 units of activity) - 12 µM

[tex]K_m[/tex] = 0 µM

Therefore, the Km value would remain at 12 µM after treatment with enough cyanide to lower the enzyme's [tex]V_m_a_x[/tex] to 40 units of activity.

To know more about enzyme refer here :

https://brainly.com/question/31621283

#SPJ11

The compound that is an alcohol is option d, C6H5OH. This is because the compound has the -OH functional group, which is the defining feature of alcohols. Option a, CH3OCH3, is a compound called dimethyl ether and is not an alcohol. Option b, CH4, is methane and does not have any functional groups.

Option c, C2H6, is ethane and is also not an alcohol. Option e, CH3NH2, is methylamine and does not have an -OH functional group, so it is also not an alcohol.

The options are a. CH3OCH3, b. CH4, c. C2H6, d. C6H5OH, and e. CH3NH2.

The compound that is an alcohol is d. C6H5OH. Alcohols are organic compounds containing a hydroxyl (-OH) group attached to a carbon atom. In C6H5OH, also known as phenol, the hydroxyl group is bonded to a carbon atom in a benzene ring, fulfilling the criteria of an alcohol. The other compounds are not alcohols: a. CH3OCH3 is an ether, b. CH4 is a hydrocarbon (methane), c. C2H6 is a hydrocarbon (ethane), and e. CH3NH2 is an amine (methylamine).

To know more about Alcohol visit:

https://brainly.com/question/30829120

#SPJ11

Ionic bonds are formed between a metal and a nonmetal, where one atom loses one or more electrons to another atom that gains those electrons.

Polar covalent bonds are formed between two nonmetals that share electrons unequally, creating partial positive and negative charges. Nonpolar covalent bonds are formed between two nonmetals that share electrons equally, creating no partial charges. Using this information, we can classify the bonds as follows:

N-F: Polar covalent bond

Se-Cl: Polar covalent bond

Rb-F: Ionic bond

Na-F: Ionic bond

F-F: Nonpolar covalent bond

I-I: Nonpolar covalent bond

Note that for N-F and Se-Cl, the electronegativity difference between the atoms is greater than 0.5 but less than 1.7, so the bonds are considered polar covalent. For Rb-F and Na-F, the electronegativity difference is greater than 1.7, so the bonds are considered ionic. For F-F and I-I, the electronegativity difference is zero, so the bonds are considered nonpolar covalent.

For more questions like bonds visit the link below:

https://brainly.com/question/7140445

#SPJ11

The pH after the addition of 50.0 mL of HCl is 0.89.

The reaction between LiOH and HCl is:

LiOH(aq) + HCl(aq) → LiCl(aq) + [tex]H_2O[/tex](l)

Before any HCl is added, the solution contains only LiOH. Therefore, the initial concentration of hydroxide ions [OH-] is:

[OH-] = 0.220 mol/L

(a) Before any HCl is added:

In this case, the solution is a strong base, and the pH can be calculated using the equation:

pH = 14 - pOH

pH = 14 - log([OH-]) = 14 - log(0.220) = 11.66

(b) After addition of 13.5 mL of HCl:

The moles of HCl added is:

moles of HCl = (0.220 mol/L)(0.0135 L) = 0.00297 mol

After the addition of HCl, the total volume of the solution is:

V = 35.0 mL + 13.5 mL = 48.5 mL = 0.0485 L

The moles of LiOH remaining is:

moles of LiOH = (0.220 mol/L)(0.0350 L) = 0.00770 mol

The moles of OH- remaining is:

moles of OH- = 0.00770 mol - 0.00297 mol = 0.00473 mol

The concentration of OH- ions is:

[OH-] = moles of OH-/V = 0.00473 mol/0.0485 L = 0.0975 mol/L

The pOH is:

pOH = -log[OH-] = -log(0.0975) = 1.01

The pH is:

pH = 14 - pOH = 14 - 1.01 = 12.99

(c) After addition of 25.5 mL of HCl:

The moles of HCl added is:

moles of HCl = (0.220 mol/L)(0.0255 L) = 0.00561 mol

After the addition of HCl, the total volume of the solution is:

V = 35.0 mL + 25.5 mL = 60.5 mL = 0.0605 L

The moles of LiOH remaining is:

moles of LiOH = (0.220 mol/L)(0.0350 L) = 0.00770 mol

The moles of OH- remaining is:

moles of OH- = 0.00770 mol - 0.00561 mol = 0.00209 mol

The concentration of OH- ions is:

[OH-] = moles of OH-/V = 0.00209 mol/0.0605 L = 0.0345 mol/L

The pOH is:

pOH = -log[OH-] = -log(0.0345) = 1.46

The pH is:

pH = 14 - pOH = 14 - 1.46 = 12.54

(d) After addition of 35.0 mL of HCl:

The moles of HCl added is:

moles of HCl = (0.220 mol/L)(0.0350 L) = 0.00770 mol

After the addition of HCl, the total volume of the solution is:

V = 35.0 mL + 35.0 mL = 70.0 mL = 0.0700 L

The moles of LiOH remaining is:

moles of LiOH

(f) after the addition of 50.0 mL of HCl:

Before adding any HCl, the solution contains only LiOH, so we can use the Kb of LiOH to calculate the pOH and then convert to pH:

Kb for LiOH = Kw/Ka = 1.0 × 10^-14/2.0 × 10^-11 = 5.0 × 10^-4

pOH = -log(5.0 × 10^-4) = 3.3

pH = 14 - pOH = 10.7

After adding 50.0 mL of HCl, a total of 35.0 + 50.0 = 85.0 mL of solution is present, and the concentration of HCl is:

(0.220 M/L) × (50.0 mL/85.0 mL) = 0.129 M

This is a strong acid, so we can assume complete dissociation and calculate the pH using the concentration of H+:

pH = -log[H+] = -log(0.129) = 0.89

For more question on pH click on

https://brainly.com/question/172153

#SPJ11

LiOH(aq) and HCl(aq) react in a 1:1 molar ratio, meaning that the number of moles of HCl added to the solution is equal to the number of moles of LiOH originally present.

(a) Before the addition of any HCl:

The initial concentration of LiOH is 0.220 M, so the initial concentration of hydroxide ions, [OH-], can be calculated using the following equation:

LiOH → Li+ + OH-

Thus, [OH-] = 0.220 M.

The pOH of the solution can be calculated using the following equation:

pOH = -log[OH-] = -log(0.220) = 0.657

The pH of the solution can be calculated using the following equation:

pH = 14 - pOH = 14 - 0.657 = 13.343

Therefore, the pH of the solution before the addition of any HCl is 13.343.

(b) After the addition of 13.5 mL of HCl:

The amount of HCl added can be calculated using the following equation:

n(HCl) = C(HCl) x V(HCl) = 0.220 M x 0.0135 L = 0.00297 mol

Since HCl and LiOH react in a 1:1 molar ratio, the amount of LiOH remaining in the solution can be calculated as follows:

n(LiOH) = n(LiOH initial) - n(HCl added) = 0.220 M x 0.0350 L - 0.00297 mol = 0.00523 mol

The new volume of the solution is 35.0 mL + 13.5 mL = 48.5 mL.

The new concentration of LiOH can be calculated as follows:

C(LiOH) = n(LiOH) / V(solution) = 0.00523 mol / 0.0485 L = 0.108 M

The new concentration of hydroxide ions can be calculated using the following equation:

LiOH + HCl → LiCl + H2O

The reaction consumes 0.00297 mol of hydroxide ions, so the new concentration of hydroxide ions is:

[OH-] = (0.220 M x 0.0350 L - 0.00297 mol) / 0.0485 L = 0.064 M

The pOH of the solution can be calculated using the following equation:

pOH = -log[OH-] = -log(0.064) = 1.194

The pH of the solution can be calculated using the following equation:

pH = 14 - pOH = 14 - 1.194 = 12.806

Therefore, the pH of the solution after the addition of 13.5 mL of HCl is 12.806.

(c) After the addition of 25.5 mL of HCl:

The amount of HCl added can be calculated using the same equation as before:

n(HCl) = C(HCl) x V(HCl) = 0.220 M x 0.0255 L = 0.00561 mol

The amount of LiOH remaining in the solution can be calculated as follows:

n(LiOH) = n(LiOH initial) - n(HCl added) = 0.220 M x 0.0350 L - 0.00561 mol = 0.00389 mol

The new volume of the solution is 35.0 mL + 25.5 mL = 60.5 mL.

Learn more about LiOH(aq) and HCl(aq) here:

https://brainly.com/question/7082537

#SPJ11

The moment of inertia about an axis through the center of mass of the two nuclei and perpendicular to the line joining them is 0.223 kg⋅m².

To calculate the moment of inertia, we need to use the formula:

I = μr²

where I is the moment of inertia, μ is the reduced mass, and r is the distance between the two nuclei.

First, we need to calculate the reduced mass:

μ = m₁m₂ / (m₁ + m₂)

where m₁ and m₂ are the masses of the two Cs atoms.

Since we have two Cs atoms, the mass of each is 2.2, so we have:

μ = (2.2)(2.2) / (2.2 + 2.2) = 1.1

Now we can calculate the moment of inertia:

I = (1.1) (0.447)²

 = 0.223 kg⋅m²

To know more about the moment of inertia, click below.

https://brainly.com/question/15246709

#SPJ11

The amount of energy required to vaporize 13.1 kg of lead at its normal boiling point is approximately 6.32 x [tex]10^{6}[/tex] joules.

To calculate the energy required to vaporize a substance, we need to use the equation Q = m * ΔHvap, where Q represents the energy, m is the mass, and ΔHvap is the heat of vaporization. The heat of vaporization for lead is 177 kJ/kg, or 177,000 J/kg.

First, we convert the mass from kilograms to grams:

13.1 kg * 1000 g/kg = 13,100 g

Next, we calculate the energy required using the formula:

Q = 13,100 g * 177,000 J/g

Multiplying these values, we find that the energy required to vaporize 13.1 kg of lead is:

Q = 2,313,700,000 J

Rounded to the appropriate significant figures, the result is approximately 6.32 x 10^{6} joules. Therefore, the amount of energy required to vaporize 13.1 kg of lead at its normal boiling point is approximately 6.32 x[tex]10^{6}[/tex] joules.

Learn more about vaporization here: https://brainly.com/question/32499566

#SPJ11

If the reaction were second order, the rate would be 0.053/s x [N₂O₅]², and if the reaction were zero order, the rate would be 0.053/s.

To calculate the rate of the reaction if it were second order, we need to use the second-order rate equation:

rate = k[N₂O₅]².

Plugging in the given rate constant (0.053/s) and concentration of N₂O₅, we get: rate = 0.053/s x [N₂O₅]².

To calculate the rate of the reaction if it were zero order, we need to use the zero-order rate equation:

rate = k[N2O5]⁰ = k.

Plugging in the given rate constant (0.053/s), we get: rate = 0.053/s.

Learn more about chemical reaction at https://brainly.com/question/14753818

#SPJ11

4.74 is the ph of a solution that is 0.10 m hc2h3o2 and 0.10 m nac2h3o2  (the conjugate base).

To determine the pH of this solution, we need to first calculate the concentration of the conjugate base, which is NaC2H3O2. Since the initial concentration of HC2H3O2 is 0.10 M and it reacts with NaOH in a 1:1 ratio, the concentration of the conjugate base is also 0.10 M.
Next, we can use the Ka value of HC2H3O2 to calculate the concentration of H+ ions in the solution:
Ka = [H+][C2H3O2-]/[HC2H3O2]
1.8 x 10^-5 = x^2 / (0.10 - x)
where x is the concentration of H+ ions
Solving for x, we get a concentration of 1.34 x 10^-3 M.
Now, we can use the pH formula to calculate the pH of the solution:
pH = -log[H+]
pH = -log(1.34 x 10^-3)
pH = 2.87
Therefore, the pH of the solution is 2.87.
The pH of a solution with 0.10 M HC2H3O2 and 0.10 M NaC2H3O2 can be determined using the Henderson-Hasselbalch equation. This equation relates the pH, pKa, and the ratio of the concentrations of the conjugate base (A-) and weak acid (HA).
Henderson-Hasselbalch equation: pH = pKa + log([A-]/[HA])
In this case, the weak acid (HA) is HC2H3O2 and its conjugate base (A-) is C2H3O2-. The Ka of HC2H3O2 is given as 1.8 x 10^-5. To find the pKa, use the formula:
pKa = -log(Ka) = -log(1.8 x 10^-5) ≈ 4.74
Since the solution is a buffer with equal concentrations of the weak acid and its conjugate base (0.10 M each), the ratio of [A-] to [HA] is 1.
Now, apply the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA]) = 4.74 + log(1) = 4.74
So, the pH of the solution is approximately 4.74.

To know more about conjugate base visit:

brainly.com/question/30225100

#SPJ11

The bag contains 56 marbles. (35 yellow marbles can be expressed in the ratio as 5 yellow marbles for every 8 orange marbles.)

If a bag contains 35 yellow marbles, we can determine the total number of marbles in the bag using the given ratio. According to the ratio provided, for every 5 yellow marbles, there are 8 orange marbles. We can set up a proportion to find the total number of marbles in the bag.

Let x be the total number of marbles in the bag. The proportion can be written as: 5 yellow marbles / 8 orange marbles = 35 yellow marbles / x

Cross-multiplying, we get: 5x = 35 * 8

5x = 280

Dividing both sides by 5, we find: x = 56

Therefore, the bag contains 56 marbles.

According to the given ratio of 5 yellow marbles for every 8 orange marbles, we can set up a proportion to find the total number of marbles in the bag. By cross-multiplying, we find that 5 times the total number of marbles is equal to 35 times 8. Simplifying the equation, we get 5x = 280. Dividing both sides of the equation by 5, we find that the total number of marbles in the bag, represented by x, is equal to 56. Therefore, the bag contains 56 marbles in total. The given information of having 35 yellow marbles helps us determine the overall quantity of marbles in the bag using the provided ratio.

LEARN MORE ABOUT marbles here: brainly.com/question/32534055

#SPJ11

To find the probability that in a randomly selected office hour the number of student arrivals is 7, we can use the Poisson distribution formula.

The Poisson distribution is used to model the probability of a certain number of events occurring within a fixed interval of time or space, given the average rate of occurrence.

In this case, the average number of student arrivals is 1.9.

The probability of exactly k events occurring in a Poisson distribution is given by the formula:

P(X=k) = (e^(-λ) * λ^k) / k!

Where λ is the average rate of occurrence.

Using this formula, we can calculate the probability of exactly 7 student arrivals in the given office hour:

P(X=7) = (e^(-1.9) * 1.9^7) / 7!

Calculating this expression will give us the desired probability.

Note: The value of e in the formula represents the base of the natural logarithm and is approximately equal to 2.71828.

 To  learn  more  about Poisson click here:brainly.com/question/31019106

#SPJ11

During the collapse of a giant star, the iron core undergoes many nuclear reactions and eventually collapses to form a neutron star or a black hole.

Part 1: In the reaction Sc-30 + 7B-10 -> 37Cl-37 + 1n-1, one neutron is produced along with chlorine-37. However, during the collapse of a giant star, many nuclear reactions occur, and it is difficult to determine which specific reaction leads to the production of chlorine-37.

Part 2: In the reaction Zn-68 + 13Al-27 -> 81Ga-95 + 2n-1, two neutrons are produced along with gallium-81. Similarly to Part 1, it is difficult to determine which specific reaction leads to the production of gallium-81 during the collapse of a giant star.

Part 3: In the reaction Fe-56 + 1n-1 -> Mn-55 + 1H-1, a proton and manganese-55 are produced. However, during the collapse of a giant star, the iron core undergoes many nuclear reactions and eventually collapses to form a neutron star or a black hole, and it is difficult to determine which specific reaction leads to the production of manganese-55.

Click the below link, to learn more about nuclide:

https://brainly.com/question/32085983

#SPJ11

The balanced half-reaction in which ethanol is oxidized to ethanoic acid is a two-electron process.

To determine the number of electrons involved in the oxidation process, we need to look at the balanced half-reaction. The half-reaction for the oxidation of ethanol to ethanoic acid is:

CH₃CH₂OH → CH₃COOH + 2e⁻

This half-reaction shows that two electrons are involved in the oxidation process. For every ethanol molecule that is oxidized, two electrons are transferred to the oxidizing agent.


Ethanol can be oxidized to ethanoic acid by a variety of oxidizing agents, including potassium permanganate, potassium dichromate, and acidic or basic solutions of potassium or sodium dichromate. During the oxidation process, ethanol loses electrons and is converted to ethanoic acid. The balanced half-reaction for the oxidation of ethanol to ethanoic acid shows that two electrons are transferred during the process. This means that the reaction is a two-electron process. The oxidation of ethanol to ethanoic acid is an important reaction in organic chemistry and is used in the production of acetic acid, which is an important industrial chemical.

To know more about oxidizing agent, visit:

https://brainly.com/question/10547418

#SPJ11

The mass percent of nickel chlorate in the solution is 2.57%. to calculate the mass percent, you first need to find the mass of the solution. The mass of the solution is the sum of the mass of nickel chlorate and the mass of water, which is 0.265 g + 10.00 g = 10.265 g.

Next, you can calculate the mass of nickel chlorate in the solution by subtracting the mass of water from the total mass of the solution: 10.265 g - 10.00 g = 0.265 g.

Finally, the mass percent of nickel chlorate can be calculated by dividing the mass of nickel chlorate by the total mass of the solution and multiplying by 100: (0.265 g / 10.265 g) x 100 = 2.57%.

Therefore, the mass percent of nickel chlorate in the solution is 2.57%.

Learn more about chlorate here:

https://brainly.com/question/20758434

#SPJ11

Answer;Dimerization is a common side reaction that occurs during the preparation of a Grignard reagent. The formation of a dimer is a result of the reaction between two equivalents of the Grignard reagent, which can occur via a radical mechanism:

1. Initiation: The reaction begins with the formation of a radical species by the reaction between the Grignard reagent and a trace amount of oxygen or moisture in the solvent:

   RMgX + O2 (or H2O) → R• + MgXOH (or MgX2)

2. Propagation: The radical species reacts with another molecule of the Grignard reagent to form a new radical species, which then reacts with a molecule of the solvent:

   R• + RMgX → R-R + MgX•

   MgX• + 2R-MgX → MgX-R + R-MgX-R

3. Termination: The radical species produced in step 2 can react with other molecules of the Grignard reagent or with other radicals to form larger oligomers, such as tetramers and higher.

   2R• → R-R

   R• + R-R → R-R-R

   R• + R-R-R → R-R-R-R

Overall, this mechanism accounts for the formation of the dimer (R-R) during the preparation of a Grignard reagent. The formation of the dimer can reduce the yield of the desired Grignard reagent, so care must be taken to minimize the amount of oxygen and moisture present in the reaction.

learn more about Dimerization

https://brainly.com/question/29517510?referrer=searchResults

#SPJ11

The complex species that will exhibit optical isomerism is; rans-[Cr(en)2BrCl]. Option C is correct.

The complex must have at least one chiral center (tetrahedral or octahedral) and no internal plane of symmetry to exhibit optical isomerism.

trans-[cr(en)2brcl] has two bidentate ethylenediamine (en) ligands that are geometrically different due to the presence of two different axial ligands (Br and Cl) in trans positions, resulting in a tetrahedral chiral center.

Optical isomerism, also known as enantiomerism, is a type of stereoisomerism that occurs when a molecule has a non-superimposable mirror image. In other words, two molecules are optical isomers if they are identical in every way except that they are mirror images of each other, like left and right hands.

Hence, C. is the correct option.

To know more about plane of symmetry here

https://brainly.com/question/30215725

#SPJ4

45 mL of 0.40 M HCl are needed to neutralize 60 mL of 0.30 M NaOH. The balanced chemical equation for the neutralization reaction between HCl and NaOH is:

HCl + NaOH -> NaCl + H2O

From the equation, we see that one mole of HCl reacts with one mole of NaOH to produce one mole of NaCl and one mole of water.

Given that the concentration of NaOH is 0.30 M and the volume of NaOH is 60 mL, the number of moles of NaOH is:

moles of NaOH = concentration × volume

moles of NaOH = 0.30 M × 0.060 L

moles of NaOH = 0.018 moles

Since the stoichiometry of the reaction is 1:1, we need the same amount of moles of HCl to neutralize the NaOH.

Thus, we can use the moles of NaOH to calculate the volume of HCl needed:

moles of HCl = moles of NaOH

moles of HCl = 0.018 moles

To find the volume of 0.40 M HCl needed, we can use the following equation:

moles of solute = concentration × volume of solution

Solving for the volume of HCl:

volume of HCl = moles of solute / concentration

volume of HCl = 0.018 moles / 0.40 M

volume of HCl = 0.045 L or 45 mL

Therefore, 45 mL of 0.40 M HCl are needed to neutralize 60 mL of 0.30 M NaOH.

To know more about neutralization refer here

brainly.com/question/27891712#

#SPJ11

The net ionic equation for the acid-base reaction between perchloric acid (HClO₄) and potassium hydroxide (KOH) is: H⁺(aq) + OH⁻(aq) ⟶ H₂O(l)

The HClO₄ dissociates in water to form H⁺ ions and ClO₄⁻ ions, while KOH dissociates to form K⁺ ions and OH⁻ ions. In the reaction, the H⁺ ion from the acid reacts with the OH⁻ ion from the base to form water.

While the K⁺ ion and ClO₄⁻ ion remain in solution and are spectator ions. Therefore, they are not included in the net ionic equation.

It's worth noting that the perchloric acid (HClO₄) and potassium hydroxide (KOH) are both strong acids and bases, respectively, meaning that they completely dissociate in water.

This makes the reaction a neutralization reaction, which involves the combination of an acid and a base to form water and a salt. In this case, the salt formed is KClO₄.

To know more about perchloric acid, refer here:

https://brainly.com/question/30780596#

#SPJ11

The most likely identity of the unknown substance is silver.

To identify the substance, we need to determine its specific heat capacity using the provided information:

The formula to calculate specific heat capacity (c) is:

q = mcΔT

where q is the heat added (85.7 J), m is the mass (21.7 g), and ΔT is the change in temperature (44.1 °C - 27.3 °C = 16.8 °C).

Rearranging the formula for c:

c = q / (mΔT)

Plugging in the given values:

c = 85.7 J / (21.7 g × 16.8 °C) ≈ 0.231 J/g°C

Now, comparing the calculated specific heat capacity with the given substances:

- Copper: 0.385 J/g°C
- Silver: 0.235 J/g°C
- Aluminum: 0.903 J/g°C
- Iron: 0.449 J/g°C
- Water: 4.184 J/g°C
- Lead: 0.128 J/g°C

The substance with the closest specific heat capacity to our calculated value (0.231 J/g°C) is silver, with a specific heat of 0.235 J/g°C. Therefore, the most likely identity of the unknown substance is silver.

To learn more about silver, refer below:

https://brainly.com/question/6434391

#SPJ11

The specific heat of the metal is 0.196 J/g°C.

To calculate the specific heat of the metal, we can use the formula:

q = m * c * ΔT

Where q is the amount of heat absorbed, m is the mass of the metal, c is the specific heat of the metal, and ΔT is the change in temperature.

In this case, we know that the mass of the metal is 2185 g and the heat absorbed is 431 J. We also know that the initial temperature is 23°C and the final temperature is 24°C.

First, we need to calculate the change in temperature:
ΔT = final temperature - initial temperature
ΔT = 24°C - 23°C
ΔT = 1°C

Now we can plug in the values we know and solve for c:

431 J = 2185 g * c * 1°C
c = 431 J / (2185 g * 1°C)

c = 0.196 J/g°C

Therefore, the specific heat of the metal is 0.196 J/g°C. This means that it takes 0.196 J of energy to raise the temperature of 1 gram of the metal by 1°C.

To know more about specific heat, refer here:

https://brainly.com/question/29766819#

#SPJ11

A unit cell.

A unit cell is the smallest repeating unit of a crystal lattice that, when repeated in all directions, generates the entire crystal structure.

It retains the same geometric shape and symmetry as the larger crystal structure, which means that the properties of the crystal can be determined from the properties of its unit cell.

The unit cell contains one or more atoms or ions and is defined by its dimensions and angles between its sides. Understanding the unit cell is essential to understanding the physical and chemical properties of crystals, and it is a fundamental concept in materials science, chemistry, and solid-state physics.

Learn more about unit cell here:

https://brainly.com/question/31627817

#SPJ11

To calculate the mole fraction of solute (NaCl), we need to determine the number of moles of NaCl and the number of moles of water in the solution.

Given:

Mass of NaCl = 5.85 g

Mass of water = 90 g

To find the number of moles of NaCl, we divide the mass of NaCl by its molar mass:

Molar mass of NaCl = 22.99 g/mol (atomic mass of Na) + 35.45 g/mol (atomic mass of Cl) = 58.44 g/mol

Number of moles of NaCl = 5.85 g / 58.44 g/mol

To find the number of moles of water, we divide the mass of water by its molar mass:

Molar mass of water (H2O) = 1.01 g/mol (atomic mass of H) + 16.00 g/mol (atomic mass of O) = 18.01 g/mol

Number of moles of water = 90 g / 18.01 g/mol

Now we can calculate the mole fraction of NaCl:

Mole fraction of NaCl = Moles of NaCl / (Moles of NaCl + Moles of water)

Mole fraction of NaCl = (5.85 g / 58.44 g/mol) / [(5.85 g / 58.44 g/mol) + (90 g / 18.01 g/mol)]

Calculating the expression, we find:

Mole fraction of NaCl ≈ 0.0197

Therefore, the mole fraction of solute (NaCl) is approximately 0.0197, which is closest to option A: 0.0196.

To know more about fraction refer here

https://brainly.com/question/10354322#

#SPJ11

The separation technique that would be used to separate copper (II) sulfate from carbon is filtration, followed by the evaporation of the solvent.

Filtration is the best method to use since it separates solids from liquids. The mixture can be poured onto a filter paper, and the copper (II) sulfate will dissolve in the water and pass through the filter paper while the carbon remains behind.

Once the copper (II) sulfate is separated from the carbon, it can be retrieved by evaporating the solvent leaving the solid copper (II) sulfate behind. This method works because copper (II) sulfate is a water-soluble compound while carbon is not.

By using filtration and evaporation, we can separate both components of the mixture.

Learn more about components here.

https://brainly.com/questions/13488004

#SPJ11

The mass of Na2HPO4 required to prepare a buffer solution with a target pH of 7.37, we need to consider the Henderson-Hasselbalch equation and the acid/base pair involved in the buffer system.

The Henderson-Hasselbalch equation is given by:

pH = pKa + log([base]/[acid])

Given:

Target pH = 7.37

pKa = 7.21

[base]/[acid] = 1.45

To achieve the target pH, we need to calculate the concentration of Na2HPO4 ([base]) and NaH2PO4 ([acid]) in the buffer solution.

Using the Henderson-Hasselbalch equation, we can rearrange it to solve for [base]/[acid]:

[base]/[acid] = 10^(pH - pKa)

Substituting the given values:

[base]/[acid] = 10^(7.37 - 7.21)

[base]/[acid] = 1.45

We are given [NaH2PO4] = 0.100 M, which represents [acid]. Therefore, we can calculate [base] as:

[base] = 1.45 × [acid]

[base] = 1.45 × 0.100 M

[base] = 0.145 M

Now, we need to calculate the mass of Na2HPO4 required to obtain a concentration of 0.145 M.

Molar mass of Na2HPO4 = 22.99 g/mol + 22.99 g/mol + 79.97 g/mol + 16.00 g/mol + 16.00 g/mol = 157.94 g/mol

Mass = moles × molar mass

Mass = 0.145 mol × 157.94 g/mol

Mass = 22.89 g

Therefore, approximately 22.89 grams of Na2HPO4 is required to prepare the buffer solution with a 1.00 L volume and a target pH of 7.37.

Learn more about Henderson-Hasselbalch equation here

https://brainly.com/question/31495136

#SPJ11

The correct name for the aromatic amine "Il = pyrimidine" is simply "pyrimidine."

Pyrimidine is an aromatic heterocyclic compound, which consists of a six-membered ring with two nitrogen atoms at positions 1 and 3.

Pyrimidine is a six-membered heterocyclic ring structure composed of four carbon atoms and two nitrogen atoms.

The nitrogen atoms are located at positions 1 and 3 within the ring. The aromatic nature of pyrimidine arises from the presence of a conjugated π electron system, which contributes to its stability and unique chemical properties.

Pyrimidine is an essential building block in nucleic acids, where it pairs with purines (adenine and guanine) to form the genetic code in DNA and RNA. It plays a critical role in storing and transmitting genetic information and is involved in various biological processes.

To summarize, pyrimidine is an aromatic heterocyclic compound with a six-membered ring containing two nitrogen atoms. It is not an aromatic amine but rather an important component of nucleic acids.

To learn more about compound, refer below:

https://brainly.com/question/13516179

#SPJ11

Answer:The carbon footprint of pork varies depending on the location and the production methods used. On average, the carbon footprint of pork production is estimated to be around 3.8 kg CO2e per kg of pork.

So for 23 kg of pork, the total carbon footprint would be:

3.8 kg CO2e/kg * 23 kg = 87.4 kg CO2e

Therefore, approximately 87.4 kg of CO2 equivalents are emitted in the production and post-farmgate processing of 23 kg of pork.

learn more about equivalents

https://brainly.com/question/25197597?referrer=searchResults

#SPJ11