1. The number of moles of carbon dioxide represent is 4 moles
2. The number of atoms of hydrogen that reacts is 1.204×10²⁴ atoms
3. The mole ratio between oxygen and water is 5 : 2
1. How do i determine the mole?The number of mole of carbon dioxide represent can be obtained as follow:
2C₂H₂ + 5O₂ → 4CO₂ + 2H₂O
From the balanced equation above,
2 moles of C₂H₂ reacted with 5 moles of O₂ to produce 4 moles of CO₂ and 2 moles of H₂O
Thus, we can conclude that the number of mole of carbon dioxide, CO₂ represent is 4 moles
2. How do i determine the number of atoms?The number of atoms of hydrogen that reacts can be obtained as follow:
2C₂H₂ + 5O₂ → 4CO₂ + 2H₂O
Number of mole of hydrogen from the balanced equation = 2 molesNumber of atoms =?1 mole of H = 6.02×10²³ atoms
Therefore,
2 moles of H = (2 mole × 6.02×10²³ atoms) / 1 mole
2 moles of H = 1.204×10²⁴ atoms
Thus, the number of atoms is 1.204×10²⁴ atoms
3. How do i determine the mole ratio?The mole ration between oxygen and water can be obtained as follow:
2C₂H₂ + 5O₂ → 4CO₂ + 2H₂O
Number of mole of oxygen from the balanced equation = 5 molesNumber of mole of water from the balanced equation = 2 molesMole ratio =?Mole ratio = Mole of oxygen / mole of water
Mole ratio = 5 / 2
Mole ratio = 5 : 2
Learn more about number of atoms:
brainly.com/question/15488332
#SPJ1
Answer:
Carbon dioxide is CO2 and the number in front of that product is 4, so without additional information it is safe to assume we have four moles of carbon dioxide.
As for part b, the only compound that has hydrogen is C2H2 which consists of 2 moles of hydrogen because of the subscript next to the hydrogen. We have 2 moles of C2H2 so we multiply our existing number of moles of hydrogen by 2 to get the total number of moles for hydrogen. Which in this case will be 4 moles.
Oxygen gas is O2 and water is H2O. The coefficient in front of O2 is 5 and the coefficient in front of H2O is 2. So the ratio is 5:2.
how many millilters each of a 2% w/v solution of tetracaine hydrochloride and a 1:1000 w/v solution of epinephrine hydrochloride should be used in preparing the prescription?
how many many grams of o2 would be contained in 14.0l balloon at 0.25atm and 73⁰c
There are approximately 6.13 grams of O2 in the 14.0 L balloon at 0.25 atm and 73⁰C.
How to calculate the number of grams of O2 in a 14.0 L balloon at 0.25 atm and 73⁰CFirst we can use the Ideal Gas Law equation:
PV = nRT
Where
P is the pressureV is the volume n is the number of molesR is the gas constantT is the temperature in KelvinFirst, we need to convert the temperature from Celsius to Kelvin:
T = 73⁰C + 273.15 = 346.15 K
Next, we can solve for the number of moles:
n = (PV) / (RT)
n = (0.25 atm × 14.0 L) / (0.0821 L·atm/mol·K × 346.15 K)
n = 0.1915 mol
Finally, we can calculate the mass of O2 using the molar mass of O2, which is 32.00 g/mol:
mass = n × molar mass
mass = 0.1915 mol × 32.00 g/mol
mass = 6.13 g
Therefore, there are approximately 6.13 grams of O2 in the 14.0 L balloon at 0.25 atm and 73⁰C.
Learn more about Ideal Gas Law here : brainly.com/question/12873752
#SPJ1
Which of the following elements is NOT involved in the cycling of energy and matter on Earth? O Phosphorus O Gold O Nitrogen O Carbon
Gold is not involved in the cycling of energy and matter on Earth.
option B.
What is Biogeochemical cycles?Biogeochemical cycles refer to the pathways by which essential elements such as carbon, nitrogen, and phosphorus move through the Earth's biosphere, atmosphere, geosphere, and hydrosphere. These cycles are crucial for maintaining the balance of elements required for life on Earth, and they involve both biotic and abiotic processes.
The carbon cycle involves the movement of carbon through the atmosphere, the biosphere, and the oceans, with processes such as photosynthesis, respiration, and decomposition contributing to carbon uptake and release. Carbon is also stored in rocks and sediments as fossil fuels.
The other three elements listed - phosphorus, nitrogen, and carbon - are all essential elements involved in biogeochemical cycles on Earth, including the phosphorus cycle, nitrogen cycle, and carbon cycle. Gold, on the other hand, is a relatively inert element and does not play a significant role in the cycling of energy and matter on Earth.
Learn more about cycling of energy here: https://brainly.com/question/29986752
#SPJ1
5. A company uses a substance that is a solid under normal conditions. This substance will be used in extreme conditions, which could make the substance’s molecules move faster and cause a phase change. How would this phase change occur, and how would the molecules of the substance be affected under these extreme conditions?
Energy would be transferred . . .
Answer:
The shift often happens when heat is applied or removed at a specific temperature
Explanation:
PLEASE MARK ME BRANLY TY HAVE A GREAT DAY!
A crazy person breaks into the school and starts randomly mixing chemical solutions together.
They combine a 0.7 M solution with a volume of 800 mL, a 1 M solution with a volume of 300 mL, and a 1.9 M solution with a volume of 860 mL into a large container. Assuming the final product doesn't blow up, what will the final solution's molarity be?
Hi, I need help with this please.
The final temperature of the water when thermal equilibrium is reached is approximately 24.36°C.
What is the final temperature of the water?The principle of conservation of energy which states that the heat lost by the metal cubes must be equal to the heat gained by the water is used to determine the final temperature of the water.
The formula to calculate the heat lost by a metal cube is:
Q = m × c × ΔT
where;
Q is the heat lost,m is the mass of the cube,c is the specific heat capacity of the metal, and ΔT is the change in temperature of the metal.For the silver cube:
m = density × volume
m = 10.49 g/cm³ × (2.31 cm)³
m = 58.48 g
c = 0.235 J/g°C (specific heat capacity of silver)
ΔT = (82.2°C - 19.6°C)
ΔT = 62.6°C
Q = 58.48 g × 0.235 J/g°C × 62.6°C
Q = 877.4 J
For the gold cube:
m = density × volume
m = 19.32 g/cm³ × (2.78 cm)³
m = 170.5 g
c = 0.129 J/g°C (specific heat capacity of gold)
ΔT = (82.2°C - 19.6°C)
ΔT = 62.6°C
Q = 170.5 g × 0.129 J/g°C × 62.6°C = 1354.4 J
The total heat lost by both cubes is:
Qtotal = 877.4 J + 1354.4 J
Qtotal= 2231.8 J
To calculate the final temperature of the water, we can use the formula:
Q = mwater × cwater × ΔT
where;
mwater is the mass of water,cwater is the specific heat capacity of water, and ΔT is the change in temperature of the water.Solving for ΔT:
ΔT = Qtotal / (mwater × cwater)
ΔT = 2231.8 J / (113.0 g × 4.184 J/g°C)
ΔT = 4.76°C
Final temperature = 19.6°C + 4.76°C
Final temperature= 24.36°C
Learn more about specific heat capacity at: https://brainly.com/question/21406849
#SPJ1
Chemistry Help Please!
1. Use the reaction to answer the following question.
MgCl₂ + 2NaOH → Mg(OH)₂ + 2NaCl
a. What mass of sodium hydroxide would be required to produce
16.0 grams of magnesium hydroxide?
b. How many moles of magnesium chloride would be need to
produce 16.0 grams?
2. What volume of 0.08892 M HNO₃ is required to react completely with
0.2352 grams of potassium hydrogen phosphate (K₂HPO₄)?
2HNO₃(aq) + K₂HPO₄(aq) → H₃PO₄(aq) + 2KNO₃(aq)
3. Joseph Priestly was the first scientist to be able to prepare pure oxygen
gas. He did this by heating mercuric oxide as shown in the reaction
below. Answer the question related to the reaction.
2HgO(ₛ) → 2Hg(l) + O₂ (g)
a. What volume of oxygen gas would be produced at STP through
the decomposition of 5.36 grams of HgO? It is not collected over
water!
b. What volume of oxygen gas would be produced at 23o
and 0.975
atm by the decomposition of 5.36 grams of HgO?
c. What volume of oxygen gas would be collected over water at
23oC and 0.975 atm by the decomposition of 5.36 grams of HgO?
4. Use this reaction to answer the questions.
Ca(OH)₂(aq) + 2HCl(aq) → CaCl₂(aq) + 2H₂O(l)
a. How many grams of water will form through the reaction of 550 mL of
2.5 M HCl and an excess amount of Ca(OH)₂?
b. How many grams of calcium chloride will form if 250 mL of 2.0 M Ca(OH)₂ reacts with 350mL of 2.5 M HCl? Make sure to determine the limiting reagent.
Caustic soda or lye are two other names for sodium hydroxide. It is a typical ingredient in detergents and cleansers. Sodium hydroxide is a colorless, odorless solid at ambient temperature.
What are sodium hydroxide uses?Lye and caustic soda are other names for sodium hydroxide, a chemical substance with the formula NaOH. It is a whitish, solid ionic substance made up of the cations sodium (Na+) and the anions hydroxide (OH).
At normal atmospheric temps, sodium hydroxide, an extremely corrosive base and alkali, breaks down proteins and can result in serious chemical burns. It easily draws moisture and carbon dioxide from the air due to its high water solubility. It produces a string of NaOH-nH2O hydrates. From water solutions, the monohydrate NaOHH2O crystallizes between 12.3 and 61.8 °C. This monohydrate is frequently the "sodium hydroxide" sold professionally, and it may be used in published statistics instead of the anhydrous substance.
Learn more about sodium hydroxide
https://brainly.com/question/29327783
#SPJ1
Which of the following electron models is the one currently accepted by modern science?
A.) Dalton's Billiard Ball.
B.) Thomson's Plum Pudding Model.
C.) Schrodinger's Quantum Mechanical Model.
D.) Rutherford-Bohr Planetary Model.
C.) Schrodinger's Quantum Mechanical Model is the electron model currently accepted by modern science. This model is based on the principles of quantum mechanics, which describe the behavior of particles at the atomic and subatomic level.
What is Electron?
An electron is a subatomic particle that carries a negative electric charge. It is one of the three fundamental particles that make up atoms, along with protons and neutrons. Electrons are much smaller than protons and neutrons, and they orbit around the nucleus of an atom. Electrons play a crucial role in chemical reactions, since they determine the chemical properties of atoms and molecules.
It represents electrons as probability clouds or orbitals, rather than as discrete particles following classical trajectories. This model has been successful in explaining the behavior of electrons in atoms and molecules, and has led to many important discoveries in modern physics and chemistry.
Learn more about Electron from the given link
https://brainly.com/question/860094
#SPJ1
Givens
Molar mass H2SO4 = 98.07 g/mol
Molar mass Li3PO4 = 115.78 g/mol
3H2SO4 + 2Li3PO4 --> 2H3PO4 + 3Li2SO4
If 44 g H2SO4 need to react, how many grams of Li3PO4 need to be used?
34.57 grams of Li3PO4 are required to react 44 g of H2SO4, in this case.
How do you figure out how much Li3PO4 you need to use?H2SO4 mass divided by its molar mass yields the number of moles of H2SO4: 44 g divided by 98.07 g/mol, or 0.4484 mol.
Li3PO4 moles equal (2/3) x H2SO4 moles equal (2/3) x 0.4484 mol = 0.2989 mol.
Using its molar mass, we can finally get the mass of Li3PO4 needed in grams:
Li3PO4 necessary mass equals number of moles times the molar mass of Li3PO4 (0.2989 mol times 115.78 g/mol equals 34.57 g).
As a result, 44 g of H2SO4 must be utilized in the reaction along with 34.57 g of Li3PO4.
To learn more about Sulphuric Acid (H2SO4) visit:
brainly.com/question/28513840
#SPJ1
Endothermic and Exothermic Activity!! please help!!!
Chemical processes referred to as endothermic reactions occur when the reactants take in heat energy from their environment to create products.
What three things separate endothermic and exothermic states?Endothermic reactions quickly and efficiently take up heat-based energy from their surroundings. In contrast, an exothermic process transfers energy into the system's surroundings. A common illustration of an endothermic chemical reaction is photosynthesis.
Is water on the stove exothermic?Chemists refer to the process of boiling water as being endothermic since heat must be added. It follows that since certain processes need heat, others must also produce heat as they operate. They are referred to as exothermic.
To know more about endothermic reactions visit:-
brainly.com/question/23184814
#SPJ1
If you have a tank that contains 3.5 x 10^24 molecules of propane (C,H₂), how many moles of propane do you
have?
Answer: Avogadro's number is 6.022 x 10^23, which represents the number of particles (atoms or molecules) in one mole of a substance. Therefore, to calculate the number of moles of propane from the given number of molecules, we need to divide the number of molecules by Avogadro's number:
Explanation: number of moles = number of molecules / Avogadro's number
number of moles = 3.5 x 10^24 / 6.022 x 10^23
number of moles = 5.81
Therefore, the tank contains 5.81 moles of propane.
a physician prescribes an ophthalmic suspension to contain 100mg of cortisone acetate in 8 ml of normal saline solution. the pharmacist has on hand a 2.5% suspension of cortisone acetate in normal saline solution. how many milliliters of this and how many milliliters of normal saline solution should be used in preparing the prescribed suspension?
the answer is 4ml and 4ml but i don't know how you get that?
2 mL οf 2.5% cοrtisοne acetate suspensiοn and 6 mL οf nοrmal saline sοlutiοn shοuld be used tο prepare the prescribed suspensiοn.
Hοw much οf 2.5% suspensiοn and nοrmal saline sοlutiοn shοuld be used?- Cοrtisοne acetate is required in 100mg
- 2.5% suspensiοn οf cοrtisοne acetate in nοrmal saline sοlutiοn is available
- Cοncentratiοn οf cοrtisοne acetate in 2.5% suspensiοn is 25mg/mL
- Thus, 4mL οf 2.5% suspensiοn is required tο get 100mg οf cοrtisοne acetate
- Thus, 4mL οf 2.5% suspensiοn and 4mL οf nοrmal saline sοlutiοn tοtal 8mL is required tο make the prescribed suspensiοn
- But, 2.5% suspensiοn already cοntains nοrmal saline sοlutiοn
- Sο, final requirement οf 2.5% suspensiοn and nοrmal saline sοlutiοn is 2mL and 6mL respectively
2 mL οf 2.5% cοrtisοne acetate suspensiοn and 6 mL οf nοrmal saline sοlutiοn shοuld be used tο prepare the prescribed suspensiοn.
Learn more about Suspension from the given link:
brainly.com/question/21110685
#SPJ1
Calculate gibbs free energy at 298 K for the reaction CaCO3(s) yields CaO(s) + CO2(g) when H equals 178.8 kJ and S=161 J/K
The Gibbs free energy at 298 K for the given reaction is 130.822 KJ
How do i determine the Gibbs free energy for the reaction?The Gibbs free energy for a given reaction is given by the following formula:
ΔG = ΔH – TΔS
Where
ΔG is the Gibbs free energy ΔH is the enthalpy changeT is the temperature ΔS is the change in entropyWith the above formula, we can determine the Gibbs free energy for the reaction in the above question as follow:
Temperature (T) = 298 KEnthalpy change (ΔH) = 178.8 KJChange of entropy (ΔS) = 161 J/K = 161 / 1000 = 0.161 KJ/KGibbs free energy =?ΔG = ΔH - TΔS
ΔG = 178.8 - (298 × 0.161)
ΔG = 178.8 - 47.978
ΔG = 130.822 KJ
Thus, the Gibbs free energy is 130.822 KJ
Learn more about Gibbs free energy:
https://brainly.com/question/13318988
#SPJ1
Can you fit one mole of people into a classroom? why or why not?
(stoichiometry)
No, it is not possible to fit one mole of people into a classroom.
What is one mole of a substance?One mole of anything is defined as the amount of that substance that contains the same number of particles as there are atoms in exactly 12 grams of carbon-12. This number is known as Avogadro's number and is equal to approximately 6.022 x 10²³.
Assuming that one person has an average mass of 70 kilograms, the mass of one mole of people would be approximately 70 kilograms x 6.022 x 10²³, which is equal to about 4.2 x 10²⁵ kilograms.
Clearly, this is an enormous mass, far too large to fit into any classroom or even any building on Earth. Therefore, it is not possible to fit one mole of people into a classroom.
Learn more about number of moles here: https://brainly.com/question/25274322
#SPJ1
Answer:
One mole of people is 6.02x1023 people. That’s more people than there are in the entire world which is estimated to be about 7x109 people. So clearly the answer is NO.
Explanation:
The beach in Antibes, France, is composed of small, smooth rocks that have been worn
down by being tumbled against each other by the energy of the sea water
Physical or Chemical?
Specific type of physical or chemical
The beach at Antibes, France, is made mostly of small, smooth rocks that have been worn down by being pushed against one another by the energy of the sea water.
What exactly is erosion?The geological process of erosion occurs when earthen materials are pushed and worn away by natural forces such as wind or water. Although it does not necessitate movement, a similar process known as weathering dissolves or disintegrates rock.
Weathering occurs when rocks and minerals on the Earth's surface disintegrate or dissolve. Weathering is caused by a variety of factors such as water, ice, acids, salts, plants, animals, and temperature swings. After a rock has been broken down, a process known as erosion transports the shards of rock and mineral away. The Earth's rocks are all too soft to endure weathering and erosion.
To know more about erosion visit:
brainly.com/question/30587260
#SPJ9
Pls pls helppp pls help
Based on the given data, we can see that the concentrations of all three greenhouse gases (CO₂, CH₄, and N₂O) have increased over time.
What is the trend about?In the sample from the 500s, the concentrations were relatively low compared to the later samples, with CO₂ at 269 ppm, CH₄ at 271 ppm, and N₂O at 260 ppm. However, in the sample from the 1700s, the concentrations had already started to increase, with CO₂ at 284 ppm, CH₄ at 736 ppm, and N₂O at 657 ppm. By the sample from the 1800s, the concentrations had increased further, with CO₂ at 276 ppm, CH₄ at 680 ppm, and N₂O at 276 ppm.
Therefore, This trend of increasing greenhouse gas concentrations is significant because these gases trap heat in the Earth's atmosphere, leading to a warming effect known as the greenhouse effect. As the concentrations continue to increase, it can lead to more severe and frequent weather events, rising sea levels, and other negative impacts on the environment and human societies.
Learn more about Carbon dioxide on:
https://brainly.com/question/25385913
#SPJ1
When a painter's oil paint becomes too thick, he has to thin it with a _________.
O a. medium of turpentine
O b.medium of water
O c.medium of linseed oil
O d. vehicle of turpentine
O e. vehicle of linseed oil
Answer:
O a. medium of turpentine
What is the density of a sample of argon gas at 69 ∘C
and 768 mmHg
?
The density of the sample of argon gas at 69 °C and 768 mmHg is 1.44 g/L (1st option)
How do i determine the density of the gas?From the question given above, the following data were obtained:
Temperature of gas (T) = 69 °C = 69 + 273 = 342KPressure of gas (P) = 768 mmHg = 768 / 760 = 1.01 atmGas constant (R) = 0.0821 atm.L/Kmol Molar mass of argon (M) = 40 g/molDensity of gas (D) = ?The density of the sample of argon gas can be obtained as illustrated below:
D = MP / RT
D = (40 × 1.01) / (0.0821 × 342)
D = 1.44 g/L
Thus, from the above calculation, we can conclude that the density of the gas is 1.44 g/L (1st option)
Learn more about density:
https://brainly.com/question/952755
#SPJ1
PLEASE HELPPPPP I WILL GIVE A BRAINLIST PLEASE
Introduction (6 points)
1. What do you think will happen when the balloon is released? (2 points)
2. What caused the balloon to move? (2 points)
3. How do you think Newton's third law of motion applies to the motion of a rocket? Hint: Think about what happened to the balloon when it was released. (2 points)
Part 1: Rocket Cars (10 points)
4. Describe the action-reaction force pair that occurs when the air in the balloon is allowed to escape. (2 points)
5. Collect data during the experiment with the rocket car. In the data table below, record the amount of air in the balloon during each test run and the distance traveled by the car. (4 points)
Test run Amount of air Distance traveled (cm)
1 Small
2
3
4
6. What relationship do you observe between the amount of air in the balloon, the size of the action-reaction force pair, and the distance traveled? (4 points)
Part 2: Car Collisions (14 points)
7. In the data table below, record the force applied to car 1 during each test run and the distance traveled by car 2 after the collision. Hint: Distance traveled by car 2 = final position of car 2 – 20 cm. (4 points)
Test run Force applied to car 1 (N) Final position of car 2 (cm) Distance traveled by car 2 (cm) Description of change in motion of car 1
1
2
3
8. How did the action and reaction forces affect the motion of each car? (4 points)
9. What is the relationship between the force of the collision and the distance traveled by car 2? Which of Newton's laws of motion explains this? (2 points)
10. The formula F = ma describes how force, mass, and acceleration are related. Explain what the formula means. How could you increase the size of the action force an object exerts and the size of the reaction force it experiences during a collision? (4 points)
Part 3: Car and Brick Collisions (10 points)
11. Describe the strengths and directions of the action and reaction forces that occur when a moving car collides with a stationary brick. How do these forces explain the changes in motion of the car and brick? (2 points)
12. What happened when the car collided with the brick with twice as much force? How does Newton's third law of motion explain this? (2 points)
13. How could you change the test to make the brick move even more? (2 point)
14. What happened when the car with the sponge bumper hit the brick with the same amount of force as the car without the bumper? (1 point)
15. Why did the car with the sponge bumper rebound farther after its collision with the brick? (1 point)
16. A rocket moving through space at a high velocity can collide with small objects, such as meteors or space junk. If that happens, the rocket may be damaged, destroyed, or pushed off course. Based on what you just observed, what do you think could be done to help reduce the effect of a collision between a rocket and space junk? (2 points)
1) Gas escapes to equalize pressure inside and outside of balloon.
2) Pressure pushes gases out of the balloon when released.
3) The gas pushes against the outside air, pushing it back.
What are gas balloons called?For its creator, Frenchman Jacques Charles, a gas balloon may also be referred to as a Charlière. Large blimps and tiny latex celebration balloons are two common types of gas balloons today. Before hot-air balloons took over, human balloon flying used gas balloons for almost 200 years, well into the 20th century.
Fill your balloon with two teaspoons of baking soda, and fill the container with half a cup of acetic vinegar. Avoid using too much cola! The baking soda in the balloon will descend into the container and mix with the vinegar when the bottleneck is inserted into the balloon's neck and the balloon is straightened.
Learn more about gas balloons
https://brainly.com/question/17714670
#SPJ1
how many molecules of PCI5 are in 77.4g PCI5
To determine the number of molecules of PCI5, we need to use the following steps:
Convert the given mass of PCI5 to moles using the molar mass of PCI5.
Use Avogadro's number to convert the number of moles to molecules.
The molar mass of PCI5 can be calculated as follows:
P = 1 x 30.97 = 30.97
C = 1 x 12.01 = 12.01
I = 5 x 126.90 = 634.50
Molar mass of PCI5 = 30.97 + 12.01 + 634.50 = 677.48 g/mol
Mass to moles:
moles = mass / molar mass
moles = 77.4 g / 677.48 g/mol
moles = 0.114 moles
Moles to molecules:
One mole of any substance contains 6.022 x 10^23 particles (Avogadro's number).
Number of molecules = moles x Avogadro's number
Number of molecules = 0.114 mol x 6.022 x 10^23 mol^-1
Number of molecules = 6.87 x 10^22 molecules
Therefore, there are 6.87 x 10^22 molecules of PCI5 in 77.4g of PCI5.
What happens to the electric current in a series circuit when voltage decreases
The energy conversation in an electrolytic cell is
(a)electrical to chemical
(b)electrical to mechanical
(c)chemical to electrical
(d)chemical to mechanical
Answer:
Your answer is electrical to chemical.
HELP ME PLEASE. I REALLY WANT TO KNOW CHEMISTRY BUT I NEED HELP. SOME KIND SOUL PLEASE.
The limiting reactant is CH4. This is because the number of moles of CH4 is 4.44mol, while the number of moles of water is 0.86mol. The number of moles of hydrogen produced from the reaction is 8.88mol.
What is hydrogen?Hydrogen is a chemical element with the symbol H and atomic number 1. It is the most abundant element in the universe, making up about 75% of the universe's elemental mass. Hydrogen is a colorless, odorless, and tasteless gas, which is the most basic and simplest of all elements. It is a highly flammable, light, and combustible gas and burns with a pale blue flame. Hydrogen is a component of water, which is composed of two atoms of hydrogen and one atom of oxygen. In addition, it is found in many organic compounds and is used in the production of ammonia, methanol, and hydrochloric acid
This means that there are not enough moles of water to completely react with the CH4. Therefore, the limiting reactant is CH4.
The number of liters of hydrogen produced from the reaction of 80.0 g of CH4 and 16.3 g of water is 16.3 L. This is because the number of moles of hydrogen produced is 8.88mol, and at STP the volume of 1mol of a gas is 22.4L. Therefore, the volume of 8.88mol of hydrogen is 8.88 x 22.4L = 197.3L. Since the total volume of gas produced is 197.3L and 16.3g of water was used in the reaction, the amount of hydrogen produced is 16.3L.
To learn more about hydrogen
https://brainly.com/question/24433860
#SPJ9
What is the Heisenberg Uncertainty Principle?
A. We can know either the speed (momentum) or location, but not both at the same time.
B. We cannot ever know the speed (momentum) or location of the electron.
C. We can know only the speed (momentum) of the electron, but never the location.
D. We can know only the location of the electron, but never the speed (momentum).
Answer:
b option is correct
Explanation:
we cannot ever know the speed and location of the electron
Sodium and Lithium have similar chemical properties. What characteristic of these elements explains why they are chemically similar?
F. Their atoms both have 1 valence electron
G. Their atoms both have more neutrons than protons
H. Their atoms have the same number of energy levels
J. Their atoms contain equal numbers of protons and electrons
I am not in college...
These elements' shared possession of a single valence electron in their atoms explains why they are chemically related. As a result, F is the right response.
An atom's valence shell electrons control how it interacts with its neighbours and, consequently, its chemical characteristics. Lithium and sodium both contain one valence electron, hence they have comparable chemical characteristics. Elements from this family include lithium, sodium, potassium, rubidium, cesium, and francium (Li, Na, K, Rb, Cs, and Fr, respectively). The components of Group 1 have similar traits. Each of them is a delicate silver metal. These metals have low melting temperatures and are extremely reactive because of their low ionisation energy.
Learn more about electrons here :
https://brainly.com/question/29237397
#SPJ1
H 2 When 68g of silver nitrate (AgNO) is heated it decomposes to form 43.2 g of silver (A H 18.4g of nitrogen dioxide (NO₂) and 6.4g of oxygen O₂. Use this data to write a balanced equation for the reaction. You must show all your working. [Relative formula masses: AgNO3 = 170; Ag =108; NO₂=46; O₂ = 32]
Answer:
2AgNO3 --> 2AgNO2 + O2
Explanation:
Matter is neither created nor destroyed in a chemical reaction. Balanced equations ensures that.
The phase diagram of ammonia.
Explanation:
Ammonia is a gas,
however at low temperature or high pressure the gas become liquid and at extreme conditions,a solid
#Brainac
2CuCl + H2S → Cu2S + 2HCl
How many moles of copper I chloride, CuCl, are necessary to react completely with 4.4 moles of hydrogen sulfide, H2S?
8.8 moles of CuCl are required for 4.4 moles of H2S to totally react.
What is mole?The unit of measurement known as a mole (mol) is used to represent the quantity of a substance. The amount of a substance that has the same number of particles (atoms, molecules, or ions) as there are in 12 grams of carbon-12 is referred to as a mole. This number, which is roughly 6.022 x 1023, is referred to as Avogadro's number.
How do you determine it?The reaction between copper I chloride and hydrogen sulfide has the following balanced chemical equation:
2CuCl + H2S → Cu2S + 2HCl
The balanced equation shows that the reaction between 2 moles of CuCl and 1 mole of H2S results in 2 moles of HCl and 1 mole of Cu2S.
So, we must use stoichiometry to calculate the amount of CuCl needed to thoroughly react with 4.4 moles of H2S:
4.4 moles of H2S × (2 moles of CuCl / 1 mole of H2S) = 8.8 moles of CuCl
As a result, 8.8 moles of CuCl are required for 4.4 moles of H2S to totally react.
To know more about mole, visit:
https://brainly.com/question/26416088
#SPJ1
the pH for a 0.185 M solution of an unknown weak base, B, is 12.95. Fill in the ICE table with the appropriate value for each involved species to determine the unknown concentrations of all reactants and products
Answer:
The balanced chemical equation for the dissociation of the weak base, B, in water is:
B + H2O ⇌ BH+ + OH-
The ICE table for the reaction can be set up as follows:
B + H2O ⇌ BH+ + OH-
I 0.185 M 0 M 0 M
C -x +x +x
E 0.185 - x x x
At equilibrium, the concentration of [BH+] and [OH-] is equal since the acid-base reaction involves the transfer of a proton from the weak base, B, to a water molecule. The [H+] ion concentration can be found by applying the equation:
Kw = [H+][OH-]
where Kw is the ion product constant of water (1.0 × 10^-14 at 25°C).
pH = -log[H+]
pOH = -log[OH-]
pKw = pH + pOH = 14.00
Using the given pH, we can find the [H+] concentration:
pH = 12.95
[H+] = 10^-pH = 7.07 × 10^-13 M
Since Kw = [H+][OH-], we can solve for [OH-]:
Kw = 1.0 × 10^-14 = [H+][OH-]
[OH-] = Kw/[H+] = 1.41 × 10^-2 M
At equilibrium, the [BH+] concentration is equal to the [OH-] concentration. Therefore, we can substitute the [OH-] value we found into the equilibrium expression for Kb to solve for Kb:
Kb = [BH+][OH-]/[B]
Kb = (x)(1.41 × 10^-2)/(0.185 - x)
The value of Kb for the weak base, B, can be found using the pKb expression:
pKb = 14.00 - pKw - pH
pKb = 14.00 - 1.00 - 12.95
pKb = 0.05
Kb = 10^-pKb = 1.00 × 10^-0.05
Substituting this value into the Kb expression gives:
1.00 × 10^-0.05 = (x)(1.41 × 10^-2)/(0.185 - x)
Solving for x gives:
x = 4.70 × 10^-4 M
Therefore, the concentrations of the species at equilibrium are:
[B] = 0.185 M - x = 0.1845 M
[BH+] = x = 4.70 × 10^-4 M
[OH-] = x = 4.70 × 10^-4 M
Consider the conversion of oxegen O2 to ozone O3.
3O2 -> 2O3
What is the theoretical yeild of O3 in grams from 305g of O2?
What is the percent yeild of the reaction actually gives u 111 g of O3?
The reaction has a 36.43% percent yield. This suggests that part of the reactants were not transformed into products and that the reaction did not proceed to its full potential.
What is moles ?The mole, which is denoted by the symbol "mol," is the volume of a system that has the same number of atoms as there are in 0.012 kilo grammes of carbon 12.
The chemical equation for converting [tex]O_{2}[/tex] to [tex]O_{3}[/tex] is as follows:[tex]O_{3}[/tex]
3[tex]O_{2}[/tex] ⇒ 2[tex]O_{3}[/tex]
From above we can conclude that the equation that 3 moles of [tex]O_{2}[/tex] react to create 2 moles of [tex]O_{3}[/tex].
By applying the the mole ratio and molar mass of [tex]O_{3}[/tex],
the theoretical yield of O3 will be-
[tex]O_{3}[/tex] mol mass = 3 x O mol mass = 3 x 16.00 g/mol = 48.00 g/mol.
o find the number of moles of O2, we can use the formula:
moles = [tex]\frac{mass}{molar mass}[/tex]
moles of [tex]O_{2}[/tex] = [tex]\frac{305 g}{32.00}[/tex] g/mol = 9.53 mol
What is theoretical yield ?The theoretical yield of [tex]O_{3}[/tex] from the balanced equation using the following formula:
Moles of [tex]O_{3}[/tex] = [tex]\frac{2}{3}[/tex] x moles of [tex]O_{2}[/tex]
= [tex]\frac{2}{3}[/tex] x 9.53 mol = 6.35 mol
Mass of O3 = moles of [tex]O_{3}[/tex] x molar mass of [tex]O_{3}[/tex]
= 6.35 mol x 48.00 g/mol = 304.80 g
= 304.80 g.
Percent yield = ([tex]\frac{actual yield}{ theoretical yield}[/tex]) x 100%
Given that the actual yield = 111 g
Percent yield = ([tex]\frac{111 g }{304.80 g}[/tex]) x 100%
= 36.43%