When naming ionic compounds, we follow the general rules:
Identify and name the cation; this is a metal element or polyatomic cation.
Identify and name the anion; this is a nonmetal element. Change the suffix to '-ide,' or use the polyatomic anion name.
*puts on sunglasses* (⌐■_■)
Good luck, son.
Which tool was most likely used in a procedure if the lab report shows that 300 mL of water was used?
O a volumetric flask
O a thermometer
a pipette
O a graduated cylinder
is sodium potassium nitrate exo or endo?
endothermic
Explanation:
I believe it's an endothermic but I'm not all too sure
Answer:
Pottasium nitrate is highly exothermic!However the dissolution of sodium nitrate in water is endothermic. Heat is absorbed during process.
A jar is filled to the top with water, and a piece of cardboard is slid over the opening so that there is only water in the . If the jar is now turned over, will the cardboard fall off? What will happen if there is any air in the jar?
Answer:
it will all fall unless these is air
Explanation:
Answer:
If you do it carefully enough, a small amount of water will pour out of the glass — that's supposed to happen. But try not to let any air bubbles get into the glass. Finally, slowly remove the hand holding the cardboard in place.
Oxygen has 6 valence electrons. how many hydrogen atoms (who have 1 valence electrons) can bond with it? remember the octet rule.
Answer:
two hydrogen can bonded with oxygen to form H2O
How much heat do you need to raise the temperature of 300 g of ethanol from 0°C to 20°C?
Answer:
14.6
Explanation:
I just took the test
The amount of heat to raise the temperature is 14.7J.
How do you calculate the heat needed to raise the temperature?The specific heat capacity of a substance is the quantity of heat needed to raise the temperature of a unit quantity of the substance by one degree. Calling the amount of heat added Q, which will cause a change in temperature ∆T to a weight of substance W, at a specific heat of material Cp, then Q = w x Cp x ∆T
By applying the formula, we get
Q = w x Cp x ∆T
Q = 300 * 2.46 * 20/1000
Q = 14.760J
What is heat?
Heat is energy that is transferred from one body to another as the result of a difference in temperature.
Learn more about the heat here: brainly.com/question/13439286
#SPJ2
How many moles are in 100 g of K3PO4 ?
How many grams of sodium chloride could be produced from 41.3 L of chlorine gas?
Answer:
The grams of sodium chloride that will be made is 292.5 g. calculation. 2Na + Cl₂ → 2NaCl. step 1: calculate the moles of Na. moles = mass/molar mass. From periodic table the molar mass of Na = 23 g/mol. moles = 115 g/23 g / mol = 5 moles. Step 2 : use the mole ratio to determine the moles of NaCl. Na:NaCl is 2:2 = 1:1 therefore the moles of NaCl is also = 5 moles.
Explanation:
We know sodium is a very active metal and chlorine is also a very reactive non-metal. Usually, metals like to eliminate electrons and non-metals such as halogens like to accept electrons. Sodium readily eliminate its last shell electrons become Na+ cation and chlorine accepts that electron to form Cl-anion.
What is the correct unit for M1 and M2?
Answer:
M1 and M2 are the masses of two. objects exerting the force on each other, and R is the distance. between their centers.
Explanation:
M1 and M2 are the masses of two. objects exerting the force on each other, and R is the distance. between their centers.
The table below shows the height of a ball x seconds after being kicked.
A 2-column table with 5 rows. The first column is labeled time (seconds) with entries 0, 0.5, 1, 1.5, 2, 2.5, 3. The second column is labeled height (feet) with entries 0, 35, 65, 85, 95, 100, 95.
What values, rounded to the nearest whole number, complete the quadratic regression equation that models the data?
f(x) =
x2 +
x + 0
Based on the regression equation and rounded to the nearest whole number, what is the estimated height after 0.25 seconds?
feet
Answer:
-16
81
19
Explanation:
The quadratic regression equation is [tex]y = -16x^2 +81x[/tex], and the estimated height in 0.25 seconds is 19 feet
What are regression equations?Regression equations are used to determine the relationship between sets of data
The dataset is given as:
Time (seconds) Height (feet)
0 0
0.5 35
1 65
1.5 85
2 95
2.5 100
3 95
To determine the quadratic regression equation, we make use of a graphing calculator.
From the graphing calculator, we have the following calculation summary:
a = -16.429
b = 81.071
c = -0.357
A quadratic regression equation, is represented as:
[tex]y = ax^2 + bx + c[/tex]
So, we have:
[tex]y = -16.429x^2 +81.071x -0.357[/tex]
Approximate
[tex]y = -16x^2 +81x[/tex]
The estimated height in 0.25 seconds is:
[tex]y = -16* 0.25^2 +81 * 0.25[/tex]
[tex]y = 19.25\\[/tex]
Approximate
[tex]y = 19[/tex]
Hence, the estimated height in 0.25 seconds is 19 feet
Read more about quadratic regression at:
https://brainly.com/question/25794160
Which of the following statements are true about elements and compounds?
A. Elements are made up of compounds.
B. Compounds are made up of elements
C. Elements can be shown with chemical symbols, but compounds cannot.
D. Elements and compounds are the same thing.
Answer:
the answer is b
hope this helps :)
please crown me brainliest!!!!
Research online to find out what the acidity of the rainfall is where you live. If you live in an area which is affected by acid rain, where do you think it is coming from and why?
Write 3-5 paragraphs describing the effects.
If you do not live an area effected by acid rain, choose another city that is effected by acid rain.
Answer & Explanation: Acid rain occurs when sulfur dioxide and nitrogen oxide are released into the air to create a chemical reaction. When the two mix in the air (oxygen), they will get into the water and mix with other pollutants in the air, making acid rain.
Answer:
What is acid rain? Acid rain occurs when sulfur dioxide and nitrogen oxide are released into the air to create a chemical reaction. When the two mix in the air (oxygen), they will get into the water and mix with other pollutants in the air, making acid rain.
What causes acid rain the most? It can be caused by useing nonrenewable resources. Which inclues coal, oil, ect.
What effects can acid rain have? It causes respiratory issues in animals and humans. When acid rain falls down and flows into the rivers and ponds it affects the aquatic ecosystem. It alters the chemical composition of the water, to a form which is actually harmful to the aquatic ecosystem to survive and causes water pollution which can harm our fresh water supply.
Please help ! Thanks you
Answer:
See Explanation
Explanation:
According to Avogadro's law;
V1/n1 = V2/n2
V1 = 5.0 L
n1 = 15.0 moles
V2= ?
n2 = 30.0 moles
V1n2 = V2n1
V2 = 5 * 30/15
V2 = 10 L
2) 1 mole of N2 occupies 22.4 L
3 moles of N2 occupies 3 * 22.4/1 = 67.2 L
3) 1 mole of O2 occupies 22.4 L
x moles occupies 201.6 L
x = 1 mole* 201.6 L/22.4 L
x = 9 moles
4) Density of a gas = mass/volume
Density of a gas = 39.95 g/22.4 L = 1.78 g/L
What two forces act in the nucleus to create a 'nuclear tug-of-war'?
a.
Covalent bond, ionic bond
c.
Van der waals force, dipole
b.
Electrostatic repulsion, strong nuclear force
d.
All of the above
Answer:
Electrostatic repulsion, strong nuclear force
Explanation:
The nucleus consists of protons and neutrons. protons are positively charged while neutrons possess no charge.
Since protons are positively charged, they repel each other strongly (like charges repel). This strong repulsion of like charges makes the nucleus somewhat unstable leading to spontaneous fission of heavy nuclei.
However, an opposing force called nuclear attractive force tends to hold the nucleons together. This attraction occurs when two nucleons are bonded by a particle called a π meson.
Hence, the two forces that act in the nucleus to create a 'nuclear tug-of-war' are electrostatic repulsion and a strong nuclear force.
what type of reaction takes place when bromine reacts with iron iodide
Answer:
If you pass bromine vapour over hot iron, a similar but slightly less vigorous reaction happens, this time producing iron(III) bromide. Anhydrous iron(III) bromide is usually produced as a reddish-brown solid. Again the iron has been oxidised to an oxidation state of +3.
Explanation:
⚠️⚠️What is kinetic energy ? ⚠️⚠️
Energy of work
Energy of movement
Energy of gravity
Energy of power
⚠️⚠️PLEASE HELP IM BEING TIMED⚠️⚠️⚠️
Answer:
Energy of Movement.
Explanation:
Have a great day!
In a closed chamber, 58 grams of propane gas and 220 grams of oxygen gas are sparked to initiate the combustion reaction shown below. C₃H₈(g) + 5 O₂(g) → 3 CO₂(g) + 4 H₂O(l) What is the limiting reagent in this reaction?
propane
oxygen
water
carbon dioxide
Answer:
C) Propane
Explanation:
It's literally all I know
All of the following are empirical formulas except:
C2H3O2
C6H6
CHO2
CH2O
Many electrical power plants use fossil fuels, a non-renewable resource to produce electricity?
A:Solar energy can be used to push energy along power lines
B:Wind energy can be used to cool overheated electrical lines
C:Moving water can be used to carry electricity to homes and businesses
D:Biomass can be used to generate heat that can be converted into electricity
Answer:
Explanation:
Thermal Power Plants generate electricity by converting heat into electricity, essentially by burning a fuel. ... A coal power plant works in much the same way, but instead of a nuclear reactor heating water to make steam, the heat from the burning coal powers a steam turbine
Answer:
Solar energy can be used to push energy along power lines.
Explanation:
Im Might be wrong, might have to fact check it but im taking the test now so :)
Balance the following chemical equation. Choose the correct coefficients in the balanced equation in order. *
4, 3, 2
2, 4, 2
1, 1, 1
3, 2, 3
Answer: 4,3,2
Explanation:
Proponer una propuesta de acción contra la degradación del suelo basándose en tres tipos de argumentos de fuentes confiables
Answer:
Cobertura vegetal, mantillo y piedra triturada.
Explicación:
Para evitar la degradación del suelo, debemos plantar una cubierta vegetal perenne que proteja el suelo de la erosión del viento y el agua sujetándolo firmemente con sus raíces. El mantillo también se usa para prevenir la erosión del suelo. En aquellas zonas donde la cobertura vegetal no es posible, tenemos que utilizar piedras trituradas para cubrir el suelo con el fin de evitar el contacto directo con el viento. Entonces, estas acciones pueden prevenir la degradación del suelo y mantener el suelo en su estado original.
What is the function of these organelles?
Answer:
Endoplasmic reticulum, Golgi apparatus, Nucleus, Storage Organelles, and Energy - Producing Organelles.
Explanation:
Hope its right! Mark me as Brainliest if it it right ;)!
What molar concentration (molarity) results when 1.28 L of 14.38 M HCl is diluted to 9.45 L of water?
Answer:
1.95 M
Explanation:
Molarity is a measure of the molar concentration of a substance (solution). In relation to the volume, it is calculated using the formula as follows;
C1V1 = C2V2
Where;
C1 = initial concentration (M)
C2 = final concentration (M)
V1 = initial volume (L)
V2 = final volume (L)
According to the provided information in this question;
C1 = 14.38 M
C2 = ?
V1 = 1.28 L
V2 = 9.45 L
Using C1V1 = C2V2
14.38 × 1.28 = C2 × 9.45
18.4064 = 9.45 C2
C2 = 18.4064 ÷ 9.45
C2= 1.95 M
What is the balanced equation for the reaction of a solution of sodium sulfate is mixed with strontium chloride?
Answer:
NaSO⁴(ads) ,ganadicate
If there were 11.25 moles of solute in a 6.0M solution, what volume would it have?
Answer:
1.875 dm^3
Explanation:
M = moles of solute ÷ volume of solution
M =11.25 x 6
= 1.875 dm^3
2L is the correct answer .
HOW TO CALCULATE ??
Given : moles of solute(n) = 11.25Molarity (M) = 6
To Find : Volume of the solution (v) = ?Key concept : [tex]M=\frac{n}{V(inL)}[/tex]On puting values and solving we get , V = 1.875 L ≈ 2L
Learn more about molarity at https://brainly.com/question/19943363
#SPJ2
In the lab you take 50.0 mL of a 40.0 M NaOH solution and then add water to it until it reaches the 500.0 mL mark of the flask. What is the concentration of the new solution?
Answer:
4.00M NaOH
Explanation:
A 50-ml amount of 40.0M NaOH contains
(40.0 mol NaOH/1 L)×(0.0500L) = 2.00 mol NaOH
Adding enough water to make a 500.0 mL NaOH solution, the new concentration of this solution is
2.00 mol NaOH/0.5000 L = 4.00M NaOH
calculate the mass of 0.8 moles of Fe(NO3)3 (H2O)9
Answer:
Molar mass of (Fe(NO3)3)(H2O)9 is 403.9972 g/mole
Explanation:
the formula to find the mass of moles
Worked Example: molar mass = mass ÷ moles (M=m/n) Calculate the molar mass of a pure substance if 1.75 moles of the substance has a mass of 29.79 g.
i think it help you
Remember, the graph in question 1 is a cooling curve. A substance is
changing from a gas to a liquid to a solid. Which model illustrates the
final phase change in this cooling curve?
A) Image A
B) Image B
C) Image C
D) Image D
3. How much heat (in joules) is needed to raise the temperature of 355 g of ethanol I
(c = 2.4 J/gºC) by 63°C?
q=mcAT
Answer:
53676 J
Explanation:
m = 355 g
c = 2.4 J/gºC
ΔT = 63°C
q = mcΔT
= (355)(2.4)(63)
= 53676 J
The amount of heat is 53676J to raise the temperature of 355 g of ethanol.
What is temperature?Temperature is a measurement of the amount of energy of the atoms in a system or a physical quantity that expresses hot and cold.
What is heat?Heat is energy that is transmitted through one body to some other due to a temperature differential. When two bodies of different temperatures come together, energy can be transferred (heat flows) from the hotter to the colder.
It can be determined by the formula:
q =mCΔT.
where, q is heat, m is mass , C is and T is temperature.
Calculation of heat is shown below:
It is given that, mass of ethanol = 355 g, c = [tex]2.4 J/g^{0}[/tex] C, ΔT. = [tex]63^{0} C[/tex]
Now, put the values of given data in heat formula:
q =mCΔT
= 355×2.4×63
=53676J.
Therefore, the amount of heat will be 53676J to raise the temperature of 355 g of ethanol
To know more about heat and temperature click here.
https://brainly.com/question/1429452.
#SPJ2
e) A plutonium atom splits apart to form two smaller atoms and free neutrons,
What type of reaction is this, where is it most likely to occur, and what else is
emitted during the reaction? (3 points)
Answer:
subject?
Explanation:
Use the drop-down menus to rank the boiling points of the following hydrocarbons. Use a "1" to indicate
the compound with the lowest boiling point.
Answer:
1. 4
2. 2
3. 3
4. 1
Explanation: just did it on edge 2021
Answer:
one.) 4
two.) 2
three.) 3
four.) 1