22.13 .. Two very long uniform lines of charge are parallel and are separated by 0.300 m. Each line of charge has charge per unit length 5.20 mC>m. What magnitude of force does one line of charge exert o

Answers

Answer 1

Answer:

Two very long uniform lines of charge are parallel and are separated by 0.300 m. Each line of charge has charge per unit length.

Explanation:


Related Questions

A cyclist pedals up to the top of a hill.

a) What kind of energy is being used to do work against gravity?

b) State the type of energy the cyclist has when he stops at the top of the hill.

c) When the cyclist moves downhill without pedaling, what type of energy does he gain?

Answers

Explanation:

A) kinetic energy

B) potential energy

C) Mechanical energy

a) The motorcyclist rises utilising chemical energy's "mechanical energy" (kinetic and potential energy). b) The cyclist's highest "gravitational potential energy" is transformed into motion downhill. c) When the rider moves downhill, potential energy becomes "kinetic energy." "Kinetic energy" is most vital.

a) "Mechanical energy" is used by the cyclist to ride up the slope. Kinetic and potential energy from an object's motion and position make up mechanical energy. As they pedal, cyclists transform chemical energy from their bodies into mechanical energy. This mechanical energy overcomes gravity as the cyclist climbs. As the cyclist climbs, potential energy accumulates, which is translated into kinetic energy as they descend.

b) At the summit of the slope, the biker has "gravitational potential energy." An object's gravitational potential energy depends on its position in a gravitational field. The biker has gained potential energy by climbing against gravity. At the crest of the hill, the cyclist's kinetic energy is lowest while potential energy is highest. The cyclist's potential energy is ready to be turned into kinetic energy as they descend.

c) Without pedalling, the rider gains "kinetic energy." The cyclist's speed increases as they descend, converting potential energy into kinetic energy. The cyclist's potential energy is turned into kinetic energy by gravity. As the rider descends, their potential energy diminishes but their kinetic energy increases, speeding up their bike. The biker converts potential energy into kinetic energy as he descends, and most of it is converted back at the bottom.

In conclusion, the cyclist climbs the incline using "mechanical energy" from chemical energy. They descend using "gravitational potential energy" at the top. Potential energy becomes "kinetic energy" when the rider descends without pedalling, speeding up the bike. Potential-to-kinetic energy conversion helps the cyclist climb the slope.

To know more about kinetic energy

https://brainly.com/question/8101588

#SPJ2

The ___ of an object changes when you take it to a different planet.

Answers

Answer:

weight

Explanation:

weight depends on gravity

A 12 N force is used to extend a spring with a spring constant of 84 N/m. Calculate the extension of the spring.

Answers

Answer:

72n

Explanation:

whaT HAPPENS WHEN a net force act's
on a moving object

Answers

Answer: the object will have an acceleration and the object's velocity will change.
Explanation: I just know

A camper stands in a valley between two parallel cliff walls. He claps his hands and notices that the echo from the nearby wall returns 0.9 s later while the echo from the farther wall returns 1.10 s later. If the air temperature is -10 C, how wide is the valley?

Answers

5,658 ft is your answer I believe

A crankshaft of an engine increases its spin from 1,000 rpm to 1,500 rpm in 0.5 s. What is its angular acceleration? (1 rev=2π rad)

600 rad/s2

100 rad/s2

500 rad/s2

60 rad/s2

Answers

the answer is 100 rad/s2

A runner slows down after completing a race. Her deceleration is 0.25 m/s2. After 5 s she is travelling at 4 m/s, determine her initial velocity.​

Answers

Please find attached photograph for your answer.

Hope it helps.

Do comment if you have any query.

The initial velocity of the runner is 5.25 m/s.

What is deceleration?

You've probably seen that when there's a lot of traffic and there are more bikes blocking us, we tend to slow down the speed of our bikes.

Therefore, deceleration is defined as a reduction in speed as the body moves away from the beginning location. The opposite of acceleration is deceleration.

Given parameters:

Deceleration of the runner: a = 0.25 m/s².

Time interval: t = 5 second.

Final velocity: v = 4 m/s.

We have to find initial velocity of the runner: u = ?

From definition of deceleration, it can be written that:

deceleration = (initial velocity - final velocity) time interval

0.25 = (u -4)/5

u =  5.25 m/s.

Hence, initial velocity of the runner is 5.25 m/s.

Learn more about deceleration here:

https://brainly.com/question/4403243

#SPJ2

Newton’s First Law of Motion applies to

1) objects at rest
2) objects in motion
3) both moving and non moving objects
4) objects that are accelerating

Answers

The answer is 3. The first law states that an object at rest stays at rest while an object in motion stays in motion

Answer:

3) both moving and non moving objects

Hope it helps:)

Mary has a mass of 40 kg and sprints at 1 m/s. How much kinetic energy does she have?

¼
She has a kinetic energy of 20 J.

Roberto has twice the mass his sister Mary has (see above) but runs at the same velocity as Mary.

Will his kinetic energy be twice as much? Show your work.

Answers

KE= 1/2m.v squared

1/280x1 squared = 40J

Yes his kinetic energy will be doubled :)

What is Space debris ?

Answers

Answer:

Space junk, or space debris, is any piece of machinery or debris left by humans in space. It can refer to big objects such as dead satellites that have failed or been left in orbit at the end of their mission. It can also refer to smaller things, like bits of debris or paint flecks that have fallen off a rocket.

Answer:

In addition to derelict man-made objects left in orbit, other examples of space debris include fragments from their disintegration, erosion and collisions or even paint flecks, solidified liquids expelled from spacecraft, and unburned particles from solid rocket motors. Space debris represents a risk to spacecraft.

Explanation:

As the temperature of an air mass increases, its atmospheric pressure______. Group of answer choices

Answers

Answer:

its atmospheric pressure decreases

When the temperature of an air mass increases, its atmospheric pressure drops

ok done. Thank to me :>

the pressure inside a latex balloon is nearly the same as the pressure outside. if you let a helium balloon go, and if, as it rises, it stays at a constant temperature, the volume of the balloon will

Answers

Answer:       If you let a helium balloon go, and if, as it rises, it stays at a constant temperature, the volume of the balloon will. The magnitude of the buoyant force is equal to the weight of the amount of fluid that has the same total volume as the object.

If you let a helium balloon go, it rises, it stays at a constant temperature, the volume of the balloon will increases.

What is volume?

A measurement of three-dimensional space is volume. Several imperial or US customary units, as well as SI-derived units (such the cubic meter and liter), are frequently used to quantify it quantitatively (such as the gallon, quart, cubic inch). Volume and length (cubed) have a symbiotic relationship.

The density for helium remains lower than that of air, therefore when the balloon is inflated with that as well, it rises. The atmosphere's pressure continues to drop as it rises, which causes the internal pressure to rise. The balloon's volume of the balloon will increase.

Therefore, the volume of the balloon will increase.

To learn more about volume, here:

https://brainly.com/question/23477586

#SPJ2

plz help, dont need to do the last question

Answers

Answer:

Explanation:

I dont understand what its saying .....?

is climbing stairs work done​

Answers

Answer:

The work you did in climbing the stairs is the force you applied (your weight) times the distance you moved upward (the height of the stairs.) So yes, climbing stairs is work done.

Explanation:

Hope this helped, nya~ :3

Sound is repeated near hills. Give reason

Answers

Explanation:

Sound is repeated near hills due to reverberation. The sound effect is prolonged is an empty room because , in a furnished room, reverberation occurs less than in a room with no furniture.

Answer:

sound that occurs in nature, such as those of animal, trees, people, the wind, the rain, etc. are the natural sounds. it is heard near the hill because of the echo and the reverberation of the sound

Match these items. Match the items in the left column to the items in the right column. 1 . gravitational force the physical law nicknamed "action-reaction" 2 . Newton's First Law the physical law that states that planetary orbits are ellipses 3 . Copernican system described as a field 4 . Kepler's First Law the model of a planetary system that has the earth at the center 5 . Kepler's Second Law an example of a heliocentric system 6 . centripetal force the physical law that states that R3\T2 = K for a system 7 . Kepler's Third Law a spacecraft cruising at v = constant with its rockets shut down 8 . geocentric system the physical law that relates acceleration to net force 9 . Newton's Third Law gravitational force that keeps planets in orbit 10 . Newton's Second Law the physical law that states that equal areas are swept out in equal times

Answers

Answer:

i can't tell which is left and right

Explanation:

Answer:

1. gravitational force = described as a field

2. Newton's First Law = a spacecraft cruising at v = constant with its rockets shut down

3. Copernican system =  an example of a heliocentric system

4. Kepler's First Law = the physical law that states that planetary orbits are ellipses

5. Kepler's Second Law = the physical law that states that equal areas are swept out in equal times

6. centripetal force = gravitational force that keeps planets in orbit

7. Kepler's Third Law = the physical law that states that R3\T2 = K for a system

8. geocentric system = the model of a planetary system that has the earth at the center

9. Newton's Third Law = the physical law nicknamed "action-reaction"

10. Newton's Second Law = the physical law that relates acceleration to net force

the source of a magnetic field is a moving _________.

Answers

Answer:

electron

Explanation:

The source of a magnetic field is a moving _________.

                              \/

The source of a magnetic field is a moving electron.

  The spinning of the electrons around the nucleus of an atom creates a magnetic field.

Have a nice day!

     I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)

- Heather

A4 m high tank filled with water is drilled with four identical small holes at 1 m, 1.5 m, 2 m and 2.5 m from the bottom of tank, the speed of efflux will be greatest from the hole at?​

Answers

Answer:

at 2.5m

Explanation:

because 2.5m*4m is 10.0=10

To solve this, we must know each and every concept related to speed of efflux and its calculations. Therefore,  hole at 3m will have the greatest speed of efflux.

What is speed of efflux?

The velocity of outflow is the speed with which a liquid emerges from a hole cut at a certain height from bottom of the container within which the liquid is contained.

Mathematically, the formula for speed of efflux can be given as

speed of efflux =√2×g×h

g= acceleration due to gravity

h1=4- 1 =3m

h2=4-2=2m

h3=4-2.5=1.5m

h4=4-1.5=2.5

Since speed of efflux is directly proportional to height. More the vale of h more will be speed of efflux. So on calculations, hole at 3m will have the greatest speed of efflux.

Therefore,  hole at 3m will have the greatest speed of efflux.

To know more about  speed of efflux, here:

https://brainly.com/question/17087482

#SPJ2

Which explains why scientists often prefer to measure mass rather than weight?

It is always the same.

It is affected by gravity.

Answers

Answer:

scientists often prefer to measure mass rather than weight because weight is affected by gravity while mass is not. Mass is always the same.

Explanation:

Weight is a force rather than a measure of the amount of matter something contains. The same amount of matter can have different weights depending on where it is. Mass directly measures the amount of matter present and remains the same no matter where it's measured.

Which of the following surfaces would have the lowest amount of friction?

a.Glass
b.Sand
c.Wood
d.Ice

Answers

Answer:

d. ice

Explanation:

Answer:

The correct answer is C. Ice, you know, since it's so slippery. lol

pls give brainliest

consider what you have learned in your astronomy class and this article about physical processes. what types of processes can emit gamma-rays?

Answers

Answer:

Gamma-rays are produced primarily by four different nuclear reactions; fusion, fission, alpha decay and gamma decay.

The type of process that can emit gamma - rays is nuclear reaction processes.

What is nuclear reaction?

A nuclear reaction is a type of reaction in which two nuclei collide to produce one or more new nuclides and release energy in the process.

Examples of nuclear reactions;

FussionFissionNuclear Decay.

Each of the nuclear reaction above can emit gamma - rays.

Thus, the type of process that can emit gamma - rays is nuclear reaction processes.

Learn more about nuclear reaction here: https://brainly.com/question/25387647

Find the volume occupied by 0.060 moles of CO2 at rtp

Answers

Answer:

At STP,

1 mole of oxygen occupies 22.4litres.

∴ 0.1 mole of oxygen will occupy = 0.1 × 22.4

= 2.24 litres.

Thus, the volume occupied by 0.1 moles of CO

2

at STP is 2.24 L

This Constitutional right forbids Congress from sending a person to prison__
Explain what this Constitutional right is:___

Answers

The formation and operation of prisons, as well as inmates' rights, are governed by federal and state regulations. Although prisoners may not have full constitutional rights, the Eighth Amendment's restriction on cruel and unusual punishment protects them.

ASAP
A train is travelling at 100 m/s when it receives an alert: “Brake! 600 meters ahead, the rails are broken”. The highest acceleration that the train can produce is 10 m/s^2. If the train slows down with a constant acceleration of 10 m/s^2
How long will it take for the train to stop?
How many meters will it travel before it stops?
Botcookiemaster please don't use a file just give me the answer

Answers

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

Let's consider the given terms ~

Initial velocity (u) = 100 m/s

Acceleration (a) = - 10 m/s²

(Acceleration is negative bbecause train slows down)

Final velocity (v) = 0 m/s

(final velocity is 0, because train stops)

Now, let's find the time taken (t) by using the first equation of motion ~

[tex]v = u + at[/tex]

[tex]0 = 100 + ( - 10 \times t)[/tex]

[tex]0 = 100 - 10t[/tex]

[tex]10t = 100[/tex]

[tex]t = 100 \div 10[/tex]

[tex]t = 10[/tex]

The train will take 10 secs to stop,

Now, let's find how much distance (s) it will cover before it stops using second equation of motion ~

[tex]s = ut + \dfrac{1}{2} at {}^{2} [/tex]

[tex]s = (100 \times 10) + ( \dfrac{1}{ 2} \times - 10 \times 10 \times 10)[/tex]

[tex]s = 1000 + ( - 500)[/tex]

[tex]s = 1000 - 500[/tex]

[tex]500 \: \: m[/tex]

It will cover 500 meters before coming to rest ~

why is clay soil chosen for earthenware? Explain it.

Answers

There are many reasons actually...

◇ Clayey soil is easy to mould than the other soils.

The other soils (like sandy soil & loamy soil) are grainy or dry in nature & cannot be moulded. In the ancient times, when technology & the know-hows were still not introduced, people used clayey soul to make earthern pots to store stuff. This practice still continues even today.

◇ It keeps water cool.

Ever wondered why water stored in the earthenware remains cool even on a sunny day? It's because the heat required for evaporation is taken from water inside the pot & thus it cools the water stored inside.

◇ Clayey soil is also moist, durable, more plastic like & easy to retain making it ideal for potters to make earthenware.

__________

Clay soil is used to make earthenwares because, clay can be easily molded to desired sizes and shapes. Clay absorbs water moiety and make the pot very cool inside.

What is clay?

Clay is a type of soil made by the sedimentation process near water resources.  They are rich in minerals. Clay is rich in silicates and intermolecular force in the soil is comparatively less and can be easily molded any shape and size.

When clay is fired to a high enough temperature, the glass-forming materials in the ceramic form a liquid glass. This glass bridges the gaps between the clay particles. As the pottery cools at the end of the firing process, the glass between the clay particles solidifies again.

Clay pots make the water cooler inside. Hence, clay is used to make earthen wares.

To find more on clay, refer here:

https://brainly.com/question/29606959

#SPJ2

Explain in terms of pressure why a boat made of modelling clay floats?

Answers

Answer:

cuz model clay float

Explanation:

yeah

please help me solve this and give an explanation​

Answers

Answer:

6.5

Explanation:

Because 1.5+5=6.5

As the skydiver's ______increases, so does the magnitude of the force due to friction.

Answers

Answer:

speed?

Explanation:

give me more information

A flea sits on the edge of a classic record album that is making 1 revolution in 0.56s. The flea is 0.20m from the center of the record
a. what is the fleas velocity?
b. What is the fleas centripetal acceleration?

Answers

Hi there!

We can begin by finding the angular velocity using dimensional analysis:

[tex]\frac{1 rev}{0.56 s} * \frac{2\pi rad}{1 rev} = 11.22 rad/sec[/tex]

(A)

Find the flea's velocity using the following relationship:

v = ωr

v = (11.22)(0.20) = 2.24 m/s

(B)

Centripetal acceleration is given by:

a = ω²r

a = (11.22²)(0.20) = 25.18 m/s²

Energy a substance or system has because of its motion Is what?

light energy
chemical energy
sound energy
electrical energy
thermal energy
mechanical energy

Answers

Answer:

Mechanical energy is the energy a substance or system has because of its motion. For example machines use mechanical energy to do work.

Other Questions
The quintet that Clifford Brown led with the drummer ________ was often cited as the last great bebop ensemble. Select ALL of the following sentences with CORRECT subject-verb agreement. ADolphins live in bodies of salt water. i need help and fast pleaseBThe wall have two windows. CArt classes helps Donna develop her skills. DThere is only one right answer to the essay question. f() =g(x) = (x - 2)2 7We can think of g as a translated (shifted) version of f.Complete the description of the transformation,Use nonnegative numbers.To get the function g, shift f up/down vbyunits and to theright/leftbyunits. What is the difference between Eukaryote and Prokaryote cells? One of the following words will most likely co-occur with the word butterA. RancidB. BitterC. SourD. RottenI need a honest answer please Kyle has two snakes fluffy is 2 meters long muffy is 900 millimeters long compare their lengths to fill in the blanks_____ is the longest snake._____ is ______millimeters longer than ____PLSS HELP!! The maintenance rehearsal task of learning a word by repeating it over and over again is most likely to a. produce some short-term remembering, but fail to produce longer-term memories. b. cause sensory memories to interfere with consolidation in working memory. c. lead to immediate decay due to retroactive interference. d. lead to effective autobiographical memories. 19. Identify the person extreme right in the above picture :(a) Jawaharlal Nehru(b) Dr.Babu Rajendra Prasad(c) Moulana Abdul Kalam Azad(d) Sardarvallabhbhaipatel Which answer gives only facts?A. Everyone has a unque set of fingerprints. B. Fingerprint look weird close up. C. it would be great if everyone memorize their fingerprints. Helpppppppkklepepepepepepepe Which of the following classes of biomaterials would be most appropriate for fabricating an artificial tendon, a tissue that must sustain substantial deformation at low forces and quickly regain its original dimensions after stress release? Why ?(a) Metals(b) Ceramics(c) Polymers What led to the formation of political parties? When E. coli is grown in a high osmotic pressure environment, _________. Multiple Choice MicF RNA is transcribed and base pairs with the OmpF mRNA at the ribosome binding site and enhances translation of the OmpF porin protein MicF RNA is not transcribed allowing a stem-loop structure to form at the site of translation initiation MicF RNA is transcribed and base pairs with the OmpF mRNA at the ribosome binding site effectively preventing translation of the OmpF porin protein MicF RNA is not transcribed so the OmpF mRNA is readily translated to synthesize the OmpF porin protein You are converting the numbers shown below into scientific notation. Which of the options will be a number times 106? Select all that apply.A)0.00578B)0.00000445C)0.000002243D)0.000091 Which of the following is widely accepted as a method of payment?A. Free exchange of ideasB. Deferred paymentsC. Medium exchange of moneyD. None of these 8 am If you make a serious driving error on the driving test, you will be automatically disqualified. True False In a recent year, 39% of all college students were enrolled part-time. If 5.8 million college students were enrolled part-time that year, what was the total number of college students?Round your answer to the nearest million. Briefly Explain ONE specific example of how a piece of literature influenced social or politicalchange in the 1850's. (20 points!!!) Please help me answer this question its important. I already know the answer I just need the working! The answer is ( Jose, $901.31 more)Janell deposits $2,000 and for 5 years leaves it in an account earning 3% annual interest, compounded quarterly. For 5 years, Jos saves and deposits $150 per quarter in an account earning 3% interest compounded quarterly. Who will have more money in the account after 5 years? How much more?Use the table below to answer: Help me answer 1b, thank you!