22. In 4f12, the 12 stands for the

Answer:

The magnesium ion is much smaller than the magnesium atom because magnesium atom contains more electrons as compared to magnesium ion. Explanation: ... Whereas when an atom tends to lose an electron then it acquires a positive charge and size of the atom tends to increase.

Answer:

Because it looses it two electrons to form a stable octet Ionic form..........

The work energy of this process : 2337.298 J

The laws of thermodynamics 1 state that: energy can be changed but cannot be destroyed or created  

ΔU=Q-W

Q=m.c.Δt

[tex]\tt Q=8.85\times 2.650\times 63.2=1482.198~J[/tex]

the work (W) :

[tex]\tt W=Q-\Delta U\\\\W=1482.198-(-855.1)=2337.298~J[/tex]

Taking into account the reaction stoichiometry and the definition of molarity, 175 mL of 2 M H₂SO₄ will react with 28.0 g of NaOH.

In first place, the balanced reaction is:

H₂SO₄ + 2 NaOH  → Na₂SO₄ + 2 H₂O

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

Then, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

Molar concentration or molarity is a measure of the concentration of a solute in a solution and indicates the number of moles of solute that are dissolved in a given volume.

The molarity of a solution is calculated by dividing the moles of solute by the volume of the solution:

[tex]Molarity= \frac{number of moles}{volume}[/tex]

Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].

The following rule of three can be applied: If by reaction stoichiometry 80 grams of NaOH react with 1 mole of H₂SO₄, 28 grams of NaOH react with how many moles of H₂SO₄?

[tex]moles of H_{2}S O_{4} =\frac{28 grams of NaOHx1 mole ofH_{2}S O_{4} }{80 grams of NaOH}[/tex]

moles of H₂SO₄= 0.35 moles

In this case, you know:

Replacing in the definition of molarity:

[tex]2 \frac{moles}{liter}= \frac{0.35 moles}{volume}[/tex]

Solving:

2 [tex]\frac{moles}{liter}[/tex] × volume= 0.35 moles

volume= 0.35 moles ÷ 2 [tex]\frac{moles}{liter}[/tex]

volume= 0.175 liters= 175 mL (being 1 L= 1000 mL)

Finally, 175 mL of 2 M H₂SO₄ will react with 28.0 g of NaOH.

Learn more about

the reaction stoichiometry:

brainly.com/question/24741074

brainly.com/question/24653699

molarity:

brainly.com/question/9324116

brainly.com/question/10608366

brainly.com/question/7429224

#SPJ1

Answer:

5.00 moles O₂

General Formulas and Concepts:

Chemistry - Atomic Structure

Explanation:

Step 1: Define

3.01 × 10²⁴ molecules O₂

Step 2: Convert

[tex]3.01 \cdot 10^{24} \ mc \ O_2(\frac{1 \ mol \ O_2}{6.022 \cdot 10^{23} \ mc \ O_2} )[/tex] = 4.99834 moles O₂

Step 3: Check

We are given 3 sig figs. Follow sig fig rules and round.

4.99834 moles O₂ ≈ 5.00 moles O₂

Answer:

This question is incomplete

Explanation:

This question is incomplete but the answer to the question can be correctly predicted from the available information from the question.

1. If a "container" (in this case a crucible) is closed throughout a heating experiment. Then it must be noted that water vapor will not be able to escape during the course of the experiment. The water vapor will form a "cloud" of water droplets under the cover of the crucible. And when this crucible is cooled, this water droplets return back to the content/substance inside the crucible.

2. When compared with the initial amount of water present in the substance in the crucible, the percentage of water "left" in the hydrate or substance in the crucible would be high. This is because the water vapor that was suppose to leave the crucible did not leave because the crucible was closed (thus causing very low amount of water vapour to leave).

Because of the student error, the percent water of crystallization value the hydrate will be lower than its actual value.

Evaporation is the process by which a liquid changes spontaneously to vapor.

In the experiment to determine percentage water of crystallization, the crucible is left open to ensure all the water molecules are removed by evaporation.

However,, since the student did not remove the crucible cover during heating, some water molecules will not be able to escape completely, but will return back to the salt.

Hence, the percent water of crystallization value the hydrate will be lower because the of mass of the anhydrous salt will be higher than its actual value.

Learn more about percent water of crystallization at: https://brainly.com/question/7805021

Answer:

Explanation:

no of molecules=5.65*10^21

NA=6.23*10^23

no of moles=no of molecules/avogadro number

no of moles=5.65*10^21/6.23*10^23

no of moles=9.07*10^-3

now we know that

no of moles=mass/molar mass

mass=no of moles*molar mass

mass=9.07*10^-3*89.06

mass=0.808 g

Answer:

6.711 × 10²⁴ molecules Mg(OH)₂

General Formulas and Concepts:

Chemistry - Atomic Structure

Explanation:

Step 1: Define

650.0 g Mg(OH)₂

Step 2: Define conversions

Avogadro's Number

Molar Mass of Mg - 24.31 g/mol

Molar Mass of O - 16.00 g/mol

Molar Mass of H - 1.01 g/mol

Molar Mass of Mg(OH)₂ - 24.31 + 2(16.00) + 2(1.01) = 58.33 g/mol

Step 3: Convert

[tex]650.0 \ g \ Mg(OH)_2(\frac{1 \ mol \ Mg(OH)_2}{58.33 \ g \ Mg(OH)_2} )(\frac{6.022 \cdot 10^{23} \ molecules \ Mg(OH)_2}{1 \ mol \ Mg(OH)_2} )[/tex]

= 6.71061 × 10²⁴ molecules Mg(OH)₂

Step 4: Check

We are given 4 sig figs. Follow sig fig rules.

6.71061 × 10²⁴ molecules Mg(OH)₂ ≈ 6.711 × 10²⁴ molecules Mg(OH)₂

Answer:

A

Explanation:

it has non polar molecule, because it has the equal sharing of electrons, so equal repulsion from all sides. atoms are equally represented.

Answer:

Trigonal planar, non-polar

Explanation:

Answer:

Mantle convection

Explanation:

The source of the force that moves tectonic plates along plate boundaries is as a result of the mantle convection.

Answer:

Graham's law states that the rate of diffusion or of effusion of a gas is inversely proportional to the square root of its molecular weight

Explanation:

H₂ will have the highest average  kinetic energy

Energy because this motion is expressed as Kinetic energy (KE) which can be formulated as:  

[tex]\tt \displaystyle KE=\frac{1}{2}mv^2[/tex]

Average velocities of gases can be expressed as root-mean-square averages. (V rms)  

[tex]\large{\boxed{\bold{v_{rms}=\sqrt{\frac{3RT}{Mm} } }}[/tex]

R = gas constant, T = temperature, Mm = molar mass of the gas particles

From the two equations above, it can be concluded

So the highest KE is owned by the gas with the smallest molar mass

Molar mass of the gas :

A) H₂  : 2 g/mol

B) N₂ : 28 g/mol

C) O₂  : 32 g/mol

D) F₂ : 38 g/mol

So H₂ has the highest average  kinetic energy

At a constant temperature: E. All the gases will have the same average  kinetic energy.

According to the kinetic-molecular theory, the average kinetic energy of gas molecules (particles) is highly dependent on temperature.

Hence, the average kinetic energy of gas molecules (particles) is directly proportional to the absolute temperature of the gas.

At a constant temperature, all gases would have the same average kinetic energy according to the kinetic-molecular theory of gases.

In conclusion, all the gases would have the same average kinetic energy since the temperature is constant.

Read more: https://brainly.com/question/24031197

Answer:

cheese and bread

Explanation:

2 bread 1 cheese = cheese sandwich

Answer: 4,000 grams of NaCI

Explanation:

We know that there are 400g of NaCI in one drop.

This bottle has 10 drops of this item.

So, we have to multiply the amount of NaCI in a drop by the amount of drops.

400 x 10 = 4,000.

The answer to the question is 4,000. Hope this helps!

Percent by mass : 4.10⁺³%

The concentration of a solution can be expressed in units such as molarity, normality, mass percent, volume percent etc.

[tex]\tt \%mass=\dfrac{mass~solute}{mass~solution}\times 100\%[/tex]

mass solute= mass of NaOH  

mass of NaOH :

[tex]\tt 0.001~mol/L\times 1~L\times 40~g/mol=0.04~g[/tex]

mass solution = 1000 g

% mass :

[tex]\tt \dfrac{0.04}{1000}\times 100=4.10^{-3}\%[/tex]

The percent by mass concentration of NaOH in the given solution is approximately 0.004%.

To calculate the percent by mass concentration of NaOH, we must find the mass of NaOH in solution.

First, we determine how many moles of NaOH are present in the solution:

Molarity (M) is calculated as moles of solute per liter of solution.

1 L = 0.001 M = mole of NaOH

We rearrange the equation to find that one mole of NaOH is equal to 0.001 moles.

Mass of NaOH = moles of NaOH * molar mass of NaOH

Mass of NaOH = 0.001 mol * 40.00 g/mol

Mass of NaOH = 0.04 g

The mass of the solution is 1000 g which is given in the question.

Percent by mass concentration of NaOH = (mass of NaOH / mass of solution) * 100%

Percent by mass concentration of NaOH = (0.04 g / 1000 g) * 100%

Percent by mass concentration of NaOH = 0.004%

Hence, the percent by mass concentration of NaOH in the given solution is approximately 0.004%.

Learn more about Mass concentration, here:

https://brainly.com/question/13959665

#SPJ6

Answer:

The answer is B

Explanation:

I had the same question and I chose B and it was correct.

Answer:

B. Carbon needs more than just three bonds to reach a noble gas

Explanation:

PLATO ANSWER

PLATO EXPLANATION-

Each hydrogen atom can make only one bond, but a carbon atom needs four bonds to be stable. Therefore, three hydrogen atoms are not enough for the carbon atom to make four bonds.

Answer:

The sodium has more moles.

n(Na)=2.09 mole

n(O)=0.999 mole

Answer:

b. decreases

Explanation:

i just took a test on it

As you move from N to Bi, the metallic properties of the element decrease. The correct option is B.

Nitrogen is a chemical element, whose chemical element is N. Nitrogen is a gas and its atomic number is 7. It is a non-metal and is present in group 15 of the periodic table.

Bismuth is a chemical element, whose chemical element is Bi. It is a post-transition metal, and it is also present in group 15 of the periodic table near arsenic and antimony. Its atomic number is 83.

Now, nitrogen and bismuth are present in the same line and group. Nitrogen is the first element of the group and going down, there is bismuth present in the group last. So the metallic property decreases from going down the group.

Thus, the correct option is B. decreases.

To learn more about nitrogen and bismuth, refer to the link:

https://brainly.com/question/24309770

#SPJ2

Answer:

Molar mass of NH4SO2=104gmol`

No of moles of NH4SO2=2.3g/104gmol`=0.022×(avagadro's constant)

Answer:

Mass of CO₂ produced = 20.328 g

Oxygen is limiting reagent.

Explanation:

Given data:

Mass of C₂H₂ = 13.7 g

Mass of O₂ = 18.5 g

Mass of CO₂ produced = ?

What is limiting reagent = ?

Solution:

Chemical equation:

2C₂H₂ + 5O₂      →     4CO₂ + 2H₂O

Number of moles of C₂H₂:

Number of moles = mass /molar mass

Number of moles = 13.7 g/ 26.04 g/mol

Number of moles = 0.526 mol

Number of moles of O₂:

Number of moles = mass /molar mass

Number of moles = 18.5 g/ 32 g/mol

Number of moles = 0.578 mol

Now we will compare the moles of CO₂ with C₂H₂ and O₂

                      C₂H₂              :                CO₂

                           2                :                 4

                       0.526            :              4/2×0.526 = 1.052

                      O₂                  :                   CO₂

                        5                   :                     4

                      0.578             :                4/5×0.578 = 0.462

The number of moles of  CO₂ produced by O₂  are less thus oxygen will be limiting reactant.

Mass of CO₂ produced:

Mass = number of moles × molar mass

Mass = 0.462 mol × 44 g/mol

Mass = 20.328 g

Answer:

1.1 M

General Formulas and Concepts:

Explanation:

Step 1: Define variables

1.2 mol KCL

1.1 L of solution

M = unknown

Step 2: Solve for Molarity

Step 3: Check

We are given 2 sig figs. Follow sig fig rules.

1.09091 M ≈ 1.1 M

Answer:

Universe.

Explanation:

Biosphere is just a planet. Solar system contains planets and star. Galaxy holds multiple solar systems only. Universe hold everything, biospheres, solar systems, and galaxies. I hope this helps :D

Answer:

B.

Explanation:

A solar system is IN a galaxy. Its not A.

A Galaxy doesnt have other galaxies in it. Its not c

A biosphere is only referring to earth. its not D.

Therefore, it is B. A universe is everything in outer space including stars, planets, and galaxies.

Answer:

3.64g

Explanation:

Given parameters:

Mass of NH₃  = 18.1g

Mass of Cu₂O  = 90.4g

Unknown:

Limiting reactant  = ?

Mass of N₂ formed  = ?

Solution:

The reaction equation is given as:

       Cu₂O + 2NH₃ → 6Cu + N₂ + 3H₂O

The limiting reactant is the one in short supply in the reaction. Let us find the number of moles of the given species;

  Number of moles = [tex]\frac{mass}{molar mass}[/tex]  

Molar mass of Cu₂O = 2(63.6) + 16  = 143.2g/mol

Molar mass of NH₃  = 14 + 3(1) = 17g/mol

Number of moles of Cu₂O = [tex]\frac{18.1}{143.2}[/tex]   = 0.13moles

Number of moles of NH₃   = [tex]\frac{90.4}{17}[/tex]   = 5.32moles

  From this reaction;

       1 mole of  Cu₂O combines with 2 mole of NH₃

So   0.13moles of  Cu₂O will combine with 0.13 x 2 mole of NH₃

                                              = 0.26moles of NH₃

Therefore, Cu₂O is the limiting reactant. Ammonia is in excess;

Mass of N₂;

   Mass = number of moles x molar mass

    1 mole of Cu₂O  will produce 1 mole of N₂

    0.13 mole of Cu₂O  will produce 0.13 mole of N₂

    Mass  = 0.13 x (2 x 14) = 3.64g

Answer:

Adenine pairs with thymine and guanine pairs with cytosine

Answer:

Increases

Explanation:

The gravitational potential energy of an object increases as you bring it higher with respect to the ground.

Gravitational potential energy depends on the mass, height and gravity between two bodies;

   Gravitational potential energy  = mgh

m is the mass

g is the height

h is the height

Answer:

d. It's ability to lose electrons

Answer:

Ionic

Explanation:

Because sulphur is a non-metal and cesium is part of the group 1 Alkali Metals, this creates an ionic bond

Ionic bonds are created from one metal and one non-metal element.

This still is declared as Ionic despite the balance of this is Cs2S

Answer:

Watch Naruto that's the answer

Explanation:

Answer:

[tex]T_f=26.7\°C[/tex]

Explanation:

Hello.

In this case, when two substances at different temperature are placed in contact in an isolated container, we can say that the heat lost by the hot substance is gained by the cold substance. In such a way, since granite is at 76.0 °C and water at 22.0 °C we infer granite is hot and water is cold, so we write:

[tex]Q_{granite}=-Q_{water}[/tex]

In terms of mass, specific heat and change in temperature, we write:

[tex]m_{granite}C_{granite}(T_f-T_{granite})=-m_{water}C_{water}(T_f-T_{water})[/tex]

Thus, since the temperature is the same for both substance, we can solve for it as shown below:

[tex]T_f=\frac{m_{granite}C_{granite}T_{granite}+m_{water}C_{water}T_{water}}{m_{granite}C_{granite}+m_{water}C_{water}}[/tex]

By plugging in each variable, we obtain:

[tex]T_f=\frac{11.1g*0.790\frac{J}{g\°C} *76.0\°C+22.0g*4.18\frac{J}{g\°C} *22.0\°C}{11.1g*0.790\frac{J}{g\°C} +22.0g*4.18\frac{J}{g\°C}}\\\\T_f=26.7\°C[/tex]

Best regards!

Answer:

-114kJ mol-1

Explanation:

Definition of the enthalpy change of neutralization: the energy released with the formation of 1 mole of water when neutralization takes place between an acid and a base.

Since both reactions yield the same number of moles of water, the answer should be -114kJ mol-1.

The statement for the enthalpy change of reaction 2 is "-114 kJ"

The change in enthalpy (ΔH) is a quantity of heat of a system. The enthalpy change is the amount of heat that enters or exits a system during a reaction.

One equivalent of hydrogen ions is neutralised with one equivalent of hydroxide ions in the reaction 1,

NaOH(aq) + HCl(aq) → NaCl(aq) + H2O(l)

The change in enthalpy is given as -114 kJ.

Two equivalents of hydrogen ions are neutralised with two equivalents of hydroxide ions in the reaction 2,

Ba(OH)2 + H2SO4 (aq) → BaSO4 (s) + 2H2O (l)

But, that primary ionic reaction is same for both the reaction in which hydrogen ion combines with hydroxide ion to generate a water molecule. So, the enthalpy change of reaction 1 would be exactly same as for reaction 2.

The neutralization enthalpy comes out to be -114 kJ.

Hence the correct answer is -114 kJ.

Learn more about enthalpy change here

https://brainly.com/question/4526346

#SPJ2