2.11 A 1.0-g sample of carbon dioxide (CO2) is fully decomposed into its elements, yielding 0.273 g of carbon and 0.727 g of oxygen. (a) What is the ratio of the mass of O to C? (b) If a sample of a different compound decomposes into 0.429 g of carbon and 0.571 g of oxygen, what is its ratio of the mass of O to C? (c) According to Dalton's atomic theory, what is the empirical formula of the second compound?

The molar solubility of BaF2 in a solution containing 0.33 M KF(aq) is 4.4 × [tex]10^{-4}[/tex] M

What is Solubility?

Solubility is a measure of the maximum amount of a substance that can dissolve in a given solvent at a specific temperature and pressure. In other words, it is the concentration of a solute in a saturated solution at a particular temperature and pressure.

To solve this problem, we need to write the balanced chemical equation for the dissolution of BaF2:

BaF2(s) ⇌ Ba2+(aq) + 2F-(aq)

And the solubility product expression (Ksp) for this reaction is:

Ksp = [Ba2+][F-]^2 = 1.8 ×[tex]10{-7}[/tex]

We know that KF is a soluble salt, and in aqueous solution, it completely dissociates into K+ and F- ions:

KF(aq) → K+(aq) + F-(aq)

When KF is added to a solution containing BaF2, the F- ions will react with the Ba2+ ions from the BaF2 to form more BaF2. This process is described by the following equation:

BaF2(s) + KF(aq) ⇌ BaF2·KF(aq)

The equilibrium constant for this reaction can be written as:

K = [BaF2·KF(aq)]/[BaF2][KF(aq)]

Now, let's define the molar solubility of BaF2 as "x". Then, we can write the concentration of Ba2+ and F- ions in terms of "x":

[Ba2+] = x

[F-] = 2x

[K+] = 0.33 M

At equilibrium, the concentrations of Ba2+, F-, and K+ ions will satisfy the equation:

K = [Ba2+][F-]^2/[BaF2][KF(aq)]

Substituting the values we have into this equation:

1.4 × [tex]10^{-4}[/tex] = x × [tex]2x^{2}[/tex] / [(1 - x)(0.33)]

Solving for "x", we get:

x = 4.4 × [tex]10^{-4}[/tex] M

Learn more about Solubility from the given link

https://brainly.com/question/23946616

#SPJ1

I did think about the statements of climate change as a result of the scientific course.

Science lectures frequently discuss the value of both natural and manufactured resources. where the change in the climate may be a shared factor. The phenomena of climate change is brought on by the planet's rapid increase in temperature.

The goal of the science seminar is to instill in young children a spirit of scientific inquiry and analytical thinking. Each State and Union Territory holds a competition for the science seminar. The National Council of Science Museum, Kolkata, selects a topic each year.

To know more about climate change visit:-

https://brainly.com/question/29617595

#SPJ1

Answer :

Explanation:

Atomic number of calcium is 20.

Electronic configuration of calcium is 1s² 2s² 2p⁶ 3s² 3p⁶ 4s²

Since (1s² 2s² 2p⁶ 3s² 3p⁶) is electronic configuration of a noble gas , Argon.

Therefore, electronic configuration of calcium can also be written as [Ar] 4s².

Electronic configuration can be defined as the distribution of electrons of an atom or molecules in atomic orbitals.

Or

It is the arrangement of the electrons in orbitals around the nucleus.

For example :-

Electronic configuration of some elements :

1. Hydrogen (Atomic no. = 1) = 1s²

2. Helium (Atomic no. = 2) = 1s²

3. Lithium (Atomic no. = 3) = 1s² 2s¹

4. Beryllium (Atomic no. = 4) = 1s² 2s²

5. Baron (Atomic no. = 5) 1s² 2s² 2p¹

The results of this investigation indicate that the quantity of salt dissolved in water affects how quickly an iron nail rusts.

The steps of the investigation of the rusting of nails are as follows:

Introduction:

Rusting is a common process in which iron reacts with oxygen and water in the presence of an electrolyte to form hydrated iron (III) oxide, commonly known as rust. In this investigation, we will explore how the amount of salt dissolved in water affects the rusting reaction of an iron nail.

Materials:

Iron nail

Water

Salt

3 small beakers

Stopwatch

Paper towels

Procedure:

Fill each beaker with 50 ml of water.

Dissolve different amounts of salt in each beaker as follows:

Beaker 1: 0 grams of salt

Beaker 2: 5 grams of salt

Beaker 3: 10 grams of salt

Place an iron nail in each beaker.

Record the time and observe the nails every hour for 6 hours.

Record your observations and take photos of the nails at the end of each hour.

At the end of the experiment, dry the nails with paper towels and compare their appearance.

Observations:

Beaker 1: No visible rust on the nail throughout the experiment.

Beaker 2: A small amount of rust appeared on the nail after 2 hours. The rust increased over time and covered about 25% of the nail surface after 6 hours.

Beaker 3: A significant amount of rust appeared on the nail after 1 hour. The rust increased rapidly and covered about 80% of the nail surface after 6 hours.

Conclusion:

The results of this investigation suggest that the rusting reaction of an iron nail depends on the amount of salt dissolved in water. When no salt was added to the water, no visible rust appeared on the nail. However, when salt was added, rust appeared on the nail. The amount of rust increased with the amount of salt added, indicating that the rusting reaction is accelerated in the presence of an electrolyte such as salt. This is because the presence of ions in the solution helps to conduct electricity, which facilitates the transfer of electrons between the iron and oxygen molecules, thus accelerating the rusting process.

Learn more about rusting of iron at: https://brainly.com/question/29136931

#SPJ1

You can use the method of distillation to separate the liquid solvent from the solution. In distillation, the solution is heated to its boiling point, and the solvent evaporates into a gas. The gas is then condensed back into a liquid and collected in a separate container, leaving behind the solute. This method is useful when you want to recover the solvent for reuse or dispose of it properly.

Answer:

he balanced chemical equation for the reaction between NaN3 and Na2O is:

2 NaN3(s) → 2 Na(s) + 3 N2(g)

According to the stoichiometry of this equation, 2 moles of NaN3 will produce 2 moles of Na, which in turn will react with 3 moles of N2. Therefore, the volume of N2 gas produced is proportional to the volume of NaN3 used.

To find the volume of NaN3 required to produce 14.7 liters of N2, we need to use the ideal gas law:

PV = nRT

where P is the pressure of the gas, V is the volume of the gas, n is the number of moles of the gas, R is the gas constant, and T is the temperature of the gas.

Assuming standard temperature and pressure (STP), which is 0°C and 1 atmosphere, we can simplify the equation to:

V = n/22.4

where V is the volume of the gas in liters and n is the number of moles of the gas.

We can use this equation to convert the volume of N2 to moles:

n = PV/RT = (1 atm)(14.7 L)/(0.08206 L·atm/mol·K)(273 K) = 0.608 mol

According to the stoichiometry of the balanced equation, 2 moles of NaN3 will produce 0.608 mol of N2. Therefore, the number of moles of NaN3 required is:

n(NaN3) = 2 × n(N2) = 2 × 0.608 mol = 1.216 mol

Finally, we can use the molar volume of a gas at STP to convert the number of moles to volume:

V(NaN3) = n(NaN3)/22.4 = 1.216 mol/22.4 L/mol = 0.054 L

Therefore, 0.054 liters of NaN3 are required to produce 14.7 liters of Na2O.

Answer:

3.29 kg of chalcopyrite must be mined to obtain 400 g of pure Cu.

Explanation:

The molar mass of Cu is 63.55 g/mol. To determine the amount of Cu present in 1 mole of chalcopyrite, we need to calculate the molar mass of CuFeS2:

Cu: 1 atom x 63.55 g/mol = 63.55 g/mol

Fe: 1 atom x 55.85 g/mol = 55.85 g/mol

S: 2 atoms x 32.06 g/mol = 64.12 g/mol

Molar mass of CuFeS2 = 63.55 + 55.85 + 64.12 = 183.52 g/mol

Therefore, 1 mole of chalcopyrite contains 63.55 g/mol / 183.52 g/mol = 0.3466 moles of Cu.

To obtain 400 g of pure Cu, we need to convert the mass of Cu to moles:

400 g / 63.55 g/mol = 6.2978 moles of Cu

Finally, we can use the mole ratio between Cu and chalcopyrite to determine the amount of chalcopyrite needed:

1 mole Cu / 0.3466 moles CuFeS2 = 2.885 moles CuFeS2

6.2978 moles Cu x (1 mole CuFeS2 / 2.885 moles Cu) x (183.52 g/mol CuFeS2 / 1000 g) = 3.29 kg of chalcopyrite

Therefore, approximately 3.29 kg of chalcopyrite must be mined to obtain 400 g of pure Cu.

A string is a data type used to represent sequence of characters, such as "12345" which is a sequence of numbers.

String is a data type used in programming languages that consists of a sequence of characters, such as letters, numbers, and symbols, typically used to store and represent text-based information. It is a data type that is used to represent text-based data, such as words and sentences. Strings are essential in programming, as they are used in many different ways, such as storing user input, manipulating text, and representing data in a readable format. Strings are also used to store a variety of data, such as text, numbers, date and time, and other special characters. In many programming languages, strings are immutable, meaning that they cannot be changed once they have been created.

To learn more about string

https://brainly.com/question/14675668

#SPJ9

Answer:

the answer is 3.0 liters of oxygen

Butan-2-one has a higher boiling point than butan-2-ol.

Butan-2-one has a higher boiling point than butan-2-ol because it has a higher molecular weight and more polar carbonyl group, which results in stronger intermolecular forces between molecules.

Butan-2-one (also known as methyl ethyl ketone) is commonly used as a solvent in various industrial applications, such as in the production of plastics, textiles, and adhesives. Butan-2-ol (also known as sec-butanol) is also used as a solvent, as well as a chemical intermediate in the production of other chemicals such as butyl acetate and glycol ethers. Both compounds are also used as flavor and fragrance ingredients in food and cosmetic products.

Learn more about "Butan-2-one" here:

https://brainly.com/question/2142051

#SPJ1

Answer:

The balanced chemical equation for the reaction between calcium ions (Ca2+) and phosphate ions (PO43-) is:

3Ca2+ + 2PO43- → Ca3(PO4)2

According to the equation, 3 moles of calcium ions react with 2 moles of phosphate ions to form 1 mole of calcium phosphate.

If 0.679 mol of phosphate ions are added and all the calcium ions are removed from the solution, then the amount of calcium ions originally present must be (3/2) * 0.679 = 1.0185 moles.

To calculate the mass of calcium dissolved in the solution, we need to know the molar mass of calcium. The molar mass of calcium is 40.08 g/mol.

Therefore, the mass of calcium dissolved in the solution is:

1.0185 moles * 40.08 g/mol = 40.77 g

The reaction's balanced chemical equation is MoO2(s) + 4H2(g) Mo(s) + 2H2O. (l). Hydrogen has a coefficient of 4.

The Haber process produces ammonia from nitrogen and hydrogen: NH3 = N2(g) + 3H2(g) (g) The reaction moving ahead is exothermic.

A method used in industry to make ammonia by reacting hydrogen and nitrogen: N2+3H2 ⇌ 2NH3 Low temperature is preferred for a high ammonia production since the reaction is reversible and exothermic (see Le Chatelier's principle).

To know more about hydrogen visit:-

https://brainly.com/question/28937951

#SPJ1

The warmest climate zones, the Tropic Zones are close to the Equator and receive a lot of direct sunlight.

The tropics are parts of Earth that are situated essentially in the centre of the planet. the tropics that, in terms of latitude, are situated between the Tropics of Cancer and Capricorn. The equator and portions of North America are included in the tropics.

As an illustration, hot places are typically found closer to the equator. Because the Sun shines most directly overhead at the equator, the climate is hotter there. Moreover, the North and South Poles are chilly because they receive the least direct sunlight and heat.

To know more about direct sunlight visit:-

https://brainly.com/question/19180305

#SPJ1

The wavelength οf the spectral line prοduced when an electrοn in a hydrοgen atοm undergοes the transitiοn frοm the energy level n=6 tο n=1 is apprοximately 980 nanοmeters.

Wavelength is a term used tο describe the distance between twο adjacent peaks οr trοughs οf a wave. It is usually denοted by the Greek letter lambda (λ) and is measured in units οf length, such as meters, centimeters, οr nanοmeters.

The wavelength οf the spectral line prοduced when an electrοn in a hydrοgen atοm undergοes the transitiοn frοm the energy level n=6 tο n=1 can be calculated using the Rydberg fοrmula:

1/λ = R (1/n1² - 1/n2²)

where λ is the wavelength οf the spectral line,

R is the Rydberg cοnstant (1.097 × 10⁷ m⁻¹),

n1 is the initial energy level (6 in this case), and

n2 is the final energy level (1 in this case).

1/λ = R (1/n1² - 1/n2²)

= (1.097 × 10⁷ m⁻¹) (1/6² - 1/1²)

= (1.097 × 10⁷  m⁻¹) (1/36 - 1/1)

= (1.097 × 10⁷  m⁻¹) (1/36 - 1)

= (1.097 × 10⁷  m⁻¹) (-35/36)

= -1.02 × 10⁶ m⁻¹

Taking the reciprοcal οf bοth sides οf the equatiοn, we get:

λ = -1/(1.02 × 10⁶ m⁻¹)

= 9.80 × 10^-7 m

Finally, cοnverting this tο nanοmeters, we get:

λ = 9.80 × 10⁻⁷ m × (1 nm / 10⁻⁹ m)

= 980 nm

Therefοre, the wavelength οf the spectral line prοduced when an electrοn in a hydrοgen atοm undergοes the transitiοn frοm the energy level n=6 tο n=1 is apprοximately 980 nanοmeters.

Learn more about Wavelength from given link

brainly.com/question/10750459

#SPJ1

This means that the molality of solutes in the blood of fish in the Antarctic Ocean must be at least -1.08 m to prevent it from freezing at -2°C.

Concentration refers to the amount of a solute (the substance being dissolved) that is present in a given amount of a solvent (the substance doing the dissolving). It is typically expressed as the amount of solute per unit volume or mass of the solution. There are several different ways to express concentration, including mass concentration, molar concentration, molality, and mole fraction. Concentration is an important concept in chemistry and is used to describe the strength of solutions, as well as to calculate reaction rates, equilibrium constants, and other properties of chemical systems.

Here,

(a) To prevent the blood of fish in the Antarctic Ocean from freezing, the concentration of solutes (such as salts or proteins) in their blood must be high enough to lower the freezing point of water below -2°C. The molality (moles of solute per kilogram of solvent) of the blood can be calculated using the formula:

ΔTf = Kf * m

where ΔTf is the change in freezing point, Kf is the freezing point depression constant for water (1.86°C/m), and m is the molality of the solution.

ΔTf = -2°C - 0°C = -2°C

Kf = 1.86°C/m

Therefore, m = ΔTf / Kf = -2°C / 1.86°C/m = -1.08 m

This is a very high concentration, but it is a reasonable physiological concentration for these fish as they have adapted to living in such extreme environments.

(b) The special type of protein in the blood of these fish that prevents it from freezing is called an antifreeze protein (AFP). The mechanism by which AFPs prevent ice formation is known as the adsorption inhibition mechanism. AFPs bind to the surface of ice crystals, preventing them from growing and aggregating, and thus inhibiting ice formation. This allows the fish to maintain fluidity of their blood and bodily fluids in subzero temperatures. The exact mechanism of how AFPs adsorb to the ice surface is still being studied, but it is thought to involve specific amino acid residues and hydrogen bonding interactions between the protein and the ice surface.

To know more about concentration,

https://brainly.com/question/29276511

#SPJ9

Answer:

Nitrogen fertilizers: These are used to promote leafy growth and overall plant development. Examples include ammonium nitrate, urea, and ammonium sulfate.

Phosphorus fertilizers: These are used to promote root development and flowering. Examples include superphosphate and triple superphosphate.

Potassium fertilizers: These are used to improve fruit quality and disease resistance. Examples include potassium chloride and potassium sulfate.

Organic fertilizers: These are derived from natural sources such as animal manure, compost, and bone meal. They provide a slow-release source of nutrients and can also improve soil structure and fertility.

Ultimately, the choice of fertilizer will depend on the specific needs of the plants and soil conditions, and it is important to use fertilizers in moderation to avoid over-fertilization and potential environmental problems.

Explanation:

the pH of the buffer solution after adding 0.100 mol of HCl is 2.99.

how to solve this problem, we will use the Henderson-Hasselbalch equation ?

pH = pKa + log([A-]/[HA])

where pKa is the dissociation constant of the weak acid, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the weak acid.

First, we need to calculate the concentrations of HF and NaF in the buffer solution. Since we have 0.300 mol of HF and 0.200 mol of NaF in 1.0 L of solution, the concentrations are:

[HF] = 0.300 M

[NaF] = 0.200 M

Next, we need to calculate the ratio of [A-]/[HA]. Since NaF is the conjugate base of HF, we can use the stoichiometry of the acid-base reaction to find that:

[A-]/[HA] = [NaF]/[HF] = 0.200/0.300 = 0.667

Now we can plug in the values into the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

pH = -log(6.8 × 10⁻⁴) + log(0.667)

pH = 3.17 + (-0.177)

pH = 2.99

Therefore, the pH of the buffer solution after adding 0.100 mol of HCl is 2.99.

To learn more about Henderson-Hasselbalch equation follow the given link:

https://brainly.com/question/29466914

#SPJ1

The complete and balanced equation for each reaction would be as follows:

To balance a chemical equation, you need to ensure that the number of atoms of each element is the same on both the reactant and product sides.

This is done by adjusting the coefficients (numbers in front of the chemical formulas) until the equation is balanced. The coefficients must be the smallest whole numbers possible, and it may be necessary to add additional reactants or products to balance the equation.

Thus, the complete and balanced chemical equations for the reactions would be:

More on balancing chemical equations can be found here: https://brainly.com/question/28294176

#SPJ1

The index of hydrogen deficiency (IHD) is used to calculate the number of unsaturations (double bonds, triple bonds, or rings) present in a molecule. The IHDs for the given compounds in the question are calculated below.

The index of hydrogen deficiency (IHD) is used to calculate the number of unsaturations (double bonds, triple bonds, or rings) present in a molecule. The IHD is calculated as follows:

IHD = 1/2 * (2C + 2 - H - X)

where C is the number of carbons, H is the number of hydrogens, and X is the number of halogens (F, Cl, Br, I).

Using this formula, we can calculate the IHD for each of the given compounds:

C5H10

IHD = 1/2 * (2(5) + 2 - 10) = 0

There are no unsaturations in this molecule.

C6H6O

IHD = 1/2 * (2(6) + 2 - 6 - 0) = 4

There are four unsaturations in this molecule, which could be four double bonds or one ring and two double bonds.

C8H13NO2

IHD = 1/2 * (2(8) + 2 - 13 - 1) = 2

There are two unsaturations in this molecule, which could be two double bonds or one ring.

C9H12Cl3NO

IHD = 1/2 * (2(9) + 2 - 12 - 3) = 3

There are three unsaturations in this molecule, which could be three double bonds or one ring and one double bond.

C9H8O4

IHD = 1/2 * (2(9) + 2 - 8 - 0) = 6

There are six unsaturations in this molecule, which could be six double bonds or three rings.

C21H30O2

IHD = 1/2 * (2(21) + 2 - 30 - 0) = 10

There are ten unsaturations in this molecule, which could be ten double bonds or five rings.

C17H21NO4

IHD = 1/2 * (2(17) + 2 - 21 - 0) = 6

There are six unsaturations in this molecule, which could be six double bonds or three rings.

C11H15NO2

IHD = 1/2 * (2(11) + 2 - 15 - 0) = 3

There are three unsaturations in this molecule, which could be three double bonds or one ring and one double bond.

C9H20

IHD = 1/2 * (2(9) + 2 - 20 - 0) = 1

There is one unsaturation in this molecule, which could be one double bond or one ring.

C7H8

IHD = 1/2 * (2(7) + 2 - 8 - 0) = 1

There is one unsaturation in this molecule, which could be one double bond or one ring.

C5H7Cl

IHD = 1/2 * (2(5) + 2 - 7 - 1) = 1

There is one unsaturation in this molecule, which could be one double bond or one ring.

C9H9NO4

IHD = 1/2 * (2(9) + 2 - 9 - 0) = 4

There are four unsaturations in this molecule, which

Learn more on IHD here https://brainly.com/question/29564213

#SPJ1

Option B. irradiating wheat to kill fungus is an example of agricultural use for radiation.

The relative significance of agricultural use for radiation is based on the fact that radiation is a physic mutagenic agent and therefore it can be sued to produce mutations in undesired organisms in order to kill them.

Therefore, with this data, we can see that the relative significance of agricultural use for radiation is based on the generation of triggered mutations in undesired organisms such as plagues.

Learn more about the use of radiation here:

https://brainly.com/question/1333944

#SPJ1

Answer:

The reaction can be broken down into the following steps:

1. Li(s) → Li(g) (enthalpy of sublimation)

2. Li(g) → Li⁺(g) + e⁻ (first ionization energy)

3. ½F2(g) → F(g) (½ of electron affinity of fluorine)

4. Li⁺(g) + F(g) → LiF(s) (lattice energy of LiF)

The overall enthalpy change for the reaction is:

ΔH⁰ = enthalpy change for step 1 + enthalpy change for step 2 + enthalpy change for step 3 + enthalpy change for step 4

ΔH⁰ = (+161 kJ/mol) + (+520 kJ/mol) + (½ x (-328 kJ/mol)) + (-1047 kJ/mol)

ΔH⁰ = -694 kJ/mol

Therefore, the overall enthalpy change for the reaction Li(s) + ½F2(g) → LiF(s) is -694 kJ/mol.

Answer:

Gravity is the long-range force that can pull entities with mass together over great distances to form galaxies, stars and planetary material. These objects are all the consequence of atoms and ions being first clustered into huge clouds of gas.

The equilibrium constant (Kc) at 800 K is 4.86 × 10³

The equilibrium constant expression for the given reaction is:

Kc = [SO3]^2 / ([SO2]^2 [O2])

where;

Substituting the given equilibrium concentrations in the expression, we get:

Kc = (5.0×10^-2)^2 / ((3.0×10^-3)^2 × 3.5×10^-3)

Kc = 4.86 × 10³ (rounded to 3 significant figures)

Therefore, the equilibrium constant (Kc) at 800 K is 4.86 × 10³

Learn more about equilibrium constant here: https://brainly.com/question/19340344

#SPJ1

[tex] \:\:\:\:\:\:\star[/tex]The equilibrium constant, Kc can be deduced for a reversible reaction by using the following expression:

[tex] \:\:\:\:\:\:\star\longrightarrow\sf \underline{Kc = \dfrac{\bigg[Products\bigg ]}{\bigg[Reactants \bigg]}}\\[/tex]

Now for solving this problem we may write the equilibrium expression for the reaction system.

[tex] \:\star\:\sf2\:SO_2\:(g)\:+O_2\:(g)\:⇌2\:SO_3\:(g)\:\\[/tex]

The equilibrium constant expression for the given reaction is:

[tex] \:\:\:\:\:\:\star\longrightarrow \sf \underline{Kc = \dfrac{\bigg[SO_3\bigg]^2 }{ \bigg[SO_2\bigg]^2\:\bigg [O_2\bigg]}....Eq}\\[/tex]

As per question, following concentrations are present in the system is given -

[tex] \:\:\:\:\:\:\star\longrightarrow \sf \underline{ Kc = \dfrac{\bigg[SO_3\bigg]^2 }{ \bigg[SO_2\bigg]^2\:\bigg [O_2\bigg]}}\\[/tex]

[tex] \:\:\:\:\:\:\longrightarrow \sf Kc = \dfrac{\bigg[5\times 10^{-2}\bigg]^2 }{ \bigg[3\times10^{-3}\bigg]^2\:\bigg [3\times10^{-3}\bigg]}\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf Kc = \dfrac{25\times 10^{-4}}{9\times 10^{-6}\times3.5\times 10^{-3}}\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf Kc=\dfrac{25}{9\times3.5}\times 10^{-4}\times10^{3}\times10^{6}\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf Kc=\dfrac{25}{31.5}\times 10^{-4+3+6}\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf Kc=\cancel{\dfrac{25}{31.5}}\times 10^{5}\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf Kc= 0.793650......\times 10^{5}\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf \underline{Kc= 7.9365\times 10^{4}}\\[/tex]

Therefore,the equilibrium constant (Kc) at 800 K is [tex]\bf\underline{ 7.9365\times 10^{4}.}\\[/tex]

The rate of disappearance of N2O5 is -2.0 x [tex]10^{-3}[/tex] mol[tex]L^{-1}[/tex] [tex]s^{-1}[/tex]. The rate of appearance of O2 is 1.0 x [tex]10^{-3}[/tex] mol [tex]L^{-1} s^{-1}[/tex].

The stoichiometric coefficient of N2O5 in the balanced equation is 2, whereas the stoichiometric coefficient of NO2 is 4. As a result, the rate of N2O5 dissolution is proportional to the rate of NO2 production. As a result, the rate at which N2O5(g) dissipates is:

N2O5(g) rate of dissolution = - (1/2) (4.0 x [tex]10^{-3} mol L^{-1} s^{-1}[/tex]) = -2.0 x [tex]10^{-3} mol L^{-1} s^{-1}[/tex]

O2(g) appears at a pace that is proportionally half as fast as N2O5 vanishes (g). As a result, the rate at which O2(g) appears is:

Rate of emergence of O2(g) = (1/2) × (2.0 × [tex]10^{-3} mol L^{-1} s^{-1}[/tex]) = 1.0 × [tex]10^{-3} mol L^{-1} s^{-1}[/tex]

To learn more about rate of a reaction visit:

brainly.com/question/8592296

#SPJ1

We need 32.8 mL of 0.95 M HCl to titrate 1.651 g of Na2CO3 to the equivalence point.

What is titration ?

Titration is a laboratory technique used to determine the concentration of an unknown solution (the analyte) by reacting it with a solution of known concentration (the titrant). In a typical titration, a measured volume of the titrant solution is slowly added to the analyte solution until the reaction is complete, as indicated by a color change or other observable signal. The volume of titrant required to reach the end-point is used to calculate the concentration of the analyte solution.

Titration is commonly used in analytical chemistry to determine the concentration of acids, bases, and other substances in a variety of samples. It is a precise and accurate method for determining the concentration of a solution, and is widely used in industry, research, and education.

From the balanced chemical equation, we can see that 1 mole of Na2CO3 reacts with 2 moles of HCl to produce 1 mole of CO2.

First, we need to calculate the number of moles of Na2CO3 in 1.651 g:

moles of Na2CO3 = mass / molar mass

molar mass of Na2CO3 = 2(22.99 g/mol) + 12.01 g/mol + 3(16.00 g/mol) = 105.99 g/mol

moles of Na2CO3 = 1.651 g / 105.99 g/mol = 0.0156 mol

Since two moles of HCl are required to react with one mole of Na2CO3, we need 2 x 0.0156 = 0.0312 moles of HCl to reach the equivalence point.

Now, we can use the molarity of the HCl solution to calculate the required volume:

moles of HCl = Molarity x volume (in liters)

0.0312 mol = 0.95 mol/L x volume (in liters)

volume (in liters) = 0.0312 mol / 0.95 mol/L = 0.0328 L

Finally, we can convert the volume to milliliters:

volume (in mL) = 0.0328 L x 1000 mL/L = 32.8 mL

Therefore, we need 32.8 mL of 0.95 M HCl to titrate 1.651 g of Na2CO3 to the equivalence point.

To know more about Titration visit :-

https://brainly.com/question/186765

#SPJ9

When each molecule of Na₂SO4•10H₂O is heated, it loses 10 water molecules.

When Na₂SO₄•10H₂O is heated, it loses water molecules to become anhydrous Na₂SO₄.

The number of water molecules lost can be calculated as follows:

Each molecule of Na₂SO₄•10H₂O contains 10 water molecules, so when it is heated, it loses all of these water molecules.

Therefore, when each molecule of Na₂SO4•10H₂O is heated, it loses 10 water molecules.

Learn more about water molecules here: https://brainly.com/question/30945925

#SPJ1