The axial stereoisomer is the most reactive in this type of reaction.
In an SN2 reaction with intramolecular catalysis, the most reactive stereoisomer is the one with an axial thioether group.
This is because in the axial position, the thioether group is closer to the leaving group (chlorine), allowing for more efficient overlap of their orbitals and a lower energy transition state.
The equatorial thioether group is farther away from the leaving group, resulting in a higher energy transition state and a slower reaction. Therefore, the axial stereoisomer is the most reactive in this type of reaction.
Learn more about stereoisomer
https://brainly.com/question/31147524
#SPJ4
Which has more atoms: one mole of helium or one mole of lead?
Answer:
They're equal.
Explanation:
Giving an idea let's use the question:
How big would a box be that holds one mole of helium?This would depend on the temperature and pressure conditions that the helium gas is being stored under.
You see, gases have no fixed volume. They will expand when the temperature increases and/or the applied pressure decreases. On the other hand, the gas will contract when cooled or pressure is applied. So one mole of helium could occupy almost any volume, depending on how much you compress it or how cool you keep it.
However, if your helium gas is stored under standard temperature and pressure conditions (STP)(0 C and 101.3 kPa), then it would fill a box with a volume of 22.4 L. This volume is known as the standard molar volume and is the same for any gas at STP.
I will let you come up with a set of dimensions for a box that could satisfy this volume.
Darlene is a dancer with ankle pain and a considerable amount of swelling. She
MOST LIKELY has what muscle disorder?
k of 0.02911(m hr). if the initial concentration is 3.13 m, what is the concentration after 3.00 hours? your answer should have three significant figures (round your answer to two decimal places).
The concentration after 3.00 hours is 2.88 m.
To solve this problem, we will use the formula for the rate of a first-order reaction:
rate = k[A]
where k is the rate constant and [A] is the concentration of the reactant. We are given k = 0.02911(m/hr) and [A] = 3.13 m. We want to find the concentration after 3.00 hours, which we'll call [A'].
We can use the integrated rate law for a first-order reaction:
ln[A'] = -kt + ln[A]
where ln is the natural logarithm. Plugging in the given values, we get:
ln[A'] = -0.02911(m/hr) * 3.00 hr + ln[3.13 m]
Simplifying, we get:
ln[A'] = -0.08733 + 1.147
ln[A'] = 1.059
To solve for [A'], we'll take the inverse natural logarithm of both sides:
[A'] = e^(1.059)
[A'] = 2.884
Rounding to three significant figures, we get:
[A'] = 2.88 m
To learn more about : concentration
https://brainly.com/question/28564792
#SPJ11
as ice melts, the water molecules group of answer choices stay ordered the same as in ice. go from a less-ordered phase to a more-ordered phase. go from a well-ordered phase to a less-ordered phase. none of the above previousnext
As ice melts, the water molecules group go from a well-ordered phase to a less-ordered phase. The correct answer is "go from a well-ordered phase to a less-ordered phase.
As ice melts, the water molecules go from a well-ordered phase to a less-ordered phase. In ice, the water molecules are arranged in a specific pattern, which gives it a solid, crystalline structure.
However, as the temperature increases and the ice begins to melt, the water molecules gain energy and start to move around more freely, breaking the rigid pattern.
This results in a less-ordered phase where the water molecules are no longer held in a fixed position. " None of the other answer choices accurately describe what happens to the water molecules as ice melts.
To learn more about : well-ordered
https://brainly.com/question/2990207
#SPJ11
Kinetic molecular theory says that as water molecules absorb energy, their motion and temperature __________ and the sample becomes ___________.
Responses
A expand, largerexpand, larger
B decrease, soliddecrease, solid
C stays the same, smallerstays the same, smaller
D increase, warm
Kinetic molecular theory says that as water molecules absorb energy, their motion and temperature increase and the sample becomes warm
What can we infer about the impact of temperature from the kinetic theory of molecules?The average kinetic energy of the molecules will rise as the temperature rises, according to the kinetic molecular theory. The edge of the container will probably be more frequently struck by the particles as they travel more quickly.
The average molecular velocity of a gas increases as its temperature rises; for example, doubling the temperature will result in a four-fold increase in molecular velocity. More momentum and kinetic energy will be transferred to the container's walls in collisions with them.
learn more about kinetic molecular theory
https://brainly.com/question/134712
#SPJ1
q23.41 - level 3 homeworkunanswereddue apr 12th, 11:30 am which alkylating agent(s) should be used for the acetoacetic ester synthesis of methyl isobutyl ketone, a common solvent?
Alkylating agents are not used in the acetoacetic ester synthesis of methyl isobutyl ketone. The acetoacetic ester synthesis is a type of organic reaction.
The response of an alkyl halide, ethyl acetoacetate, with a strong base, similar as sodium ethoxide, yields a beta- keto ester. The process begins by forming an enolate intermediate, which is latterly alkylated by the alkyl halide. After that, the product is hydrolyzed and decarboxylated to give the needed beta- keto ester.
The alkyl halide employed for alkylation in the acetoacetic ester conflation of methyl isobutyl ketone would be isobutyl iodide, not an alkylating agent. The enolate intermediate of ethyl acetoacetate is alkylated with isobutyl iodide, followed by hydrolysis and decarboxylation to induce the product, methyl isobutyl ketone. It's worth mentioning that alkylating chemicals, similar as nitrogen mustards and alkyl sulfonates, are utilised in cancer treatment as chemotherapeutic agents.
Learn more about acetoacetic ester at
https://brainly.com/question/29819446
#SPJ4
which of the following processes is not spontaneous? select one: a. a smoker's smokes gathers around the smoker. b. a woman enters a room. shortly thereafter her perfume can be smelled by those on the other side of the room. c. leaves decay. d. a lighted match burns. e. water evaporates from an open container on a dry day (low humidity).
A woman enters the room, so choice (b) is accurate. Immediately after, individuals on the opposite side of the room may smell her perfume.
Why can we smell the perfume that someone inside the space sprayed?Diffusion: When fragrance particles mingle with air particles. The odorous gas's particles are free to move fast in any direction due to diffusion. So, a room fills with the scent of perfume.
What causes you to think someone has just left the room?We can smell perfume when we open a bottle of it in a room, even from a fair distance away. This is due to the perfume's gas moving from high concentration areas to low concentration areas when the bottle is opened.
To know more about smell visit:-
https://brainly.com/question/14454576
#SPJ1
a normal penny has a mass of about 2.5g. if we assume the penny to be pure copper (which means the penny is very old since newer pennies are a mixture of copper and zinc), how many atoms of copper do 9 pennies contain?
9 pennies contain approximately [tex]2.13 x 10^23[/tex] atoms of copper.
To solve this problem, we need to use the following steps:
Determine the molar mass of copper.
Convert the mass of 9 pennies from grams to moles.
Use Avogadro's number to calculate the number of atoms of copper.
Step 1: The molar mass of copper (Cu) is approximately 63.55 g/mol.
Step 2: The mass of 9 pennies is:
9 pennies x 2.5 g/penny = 22.5 g
Converting this mass to moles, we get:
22.5 g / 63.55 g/mol = 0.354 moles
Step 3: Using Avogadro's number ([tex]6.022 x 10^23 atoms/mol)[/tex], we can calculate the number of atoms of copper:
Therefore, 9 pennies contain approximately[tex]2.13 x 10^23 a[/tex]toms of copper.
Learn more about molar mass
https://brainly.com/question/22997914
#SPJ4
when 0.0507 moles of iron(iii) chloride are dissolved in enough water to make 480 milliliters of solution, what is the molar concentration of chloride ions? answer in units of mol/l.
The molar concentration of chloride ions in the solution is 0.3169 mol/L
To find the molar concentration of chloride ions in the solution, we need to consider the mole-to-ion ratio of iron(III) chloride (FeCl₃) and then use the volume of the solution.
1 mole of FeCl₃ dissociates into 3 moles of chloride ions (Cl⁻) in solution. So, for 0.0507 moles of FeCl₃, the number of moles of Cl⁻ ions will be:
0.0507 moles FeCl₃ × (3 moles Cl⁻ / 1 mole FeCl₃) = 0.1521 moles Cl⁻
Now, we have 480 milliliters of solution, which is equivalent to 0.480 liters. To find the molar concentration of chloride ions, divide the moles of Cl⁻ by the volume of the solution in liters:
0.1521 moles Cl⁻ / 0.480 L = 0.3169 mol/L
So, the molar concentration of chloride ions in the solution is 0.3169 mol/L.
Know more about molar concentration here:
https://brainly.com/question/26255204
#SPJ11
physicists kelvin and helmholtz in the last century proposed that the source of the sun's energy could be:
Answer:
produced continually by the impact of meteors falling onto its surface.
Explanation:
How many moles of caffeine, c8h10o2n4, are contained in a 100. Mg sample of caffeine? group of answer choices 0. 0085 0. 019 0. 51 0. 0028 0. 52
The number of moles of caffeine is 0.00052 mol
To calculate the number of moles of caffeine in a 100 mg sample, we need to use the formula:
moles = mass / molar massThe molar mass of caffeine (C₈H₁₀O₂N₄) is 194.19 g/mol. Converting the mass of the sample to grams (100 mg = 0.1 g), we can plug in the values and solve for moles:
moles = 0.1 g / 194.19 g/molmoles = 0.00052 molThe mole is widely used in stoichiometry calculations, which involve determining the amount of reactants needed to produce a certain amount of products or the amount of products produced from a certain amount of reactants. It is also used in the calculation of molar mass, which is the mass of one mole of a substance, and in the conversion between mass, moles, and number of entities in chemical reactions. Therefore, the number of moles of caffeine in a 100 mg sample of caffeine is 0.00052 moles.
To learn more about moles, here
https://brainly.com/question/26416088
#SPJ4
an 80 proof bottle of vodka is equal to ___ bv.
An 80-proof bottle of vodka is equal to 40% alcohol by volume (ABV).
Proof, which is twice the percentage of alcohol by volume (ABV), is a unit of measurement for the amount of alcohol in a liquid. As a result, 40% of the content of an 80-proof bottle of vodka is alcohol. Accordingly, only 40% of the liquid in the bottle is actual alcohol, while the other 60% is made up of water and other chemicals.
The ABV of a bottle of alcohol is crucial to understand since it establishes the potency and potential consequences of the beverage. Drinks with a higher ABV are stronger and may affect the body more strongly.
Learn more about alcohol:
brainly.com/question/28404655
#SPJ4
a student dissolves of resveratrol in of a solvent with a density of . the student notices that the volume of the solvent does not change when the resveratrol dissolves in it.calculate the molarity and molality of the student's solution. round both of your answers to significant digits.molaritymolality
Molarity of the solution is 0.087 M, and the molality of the solution is 0.097 m.
To calculate the molarity, first, we need to convert the given mass of resveratrol to moles using its molar mass. The molar mass of resveratrol is (14 x 12.01 g/mol) + (12 x 1.01 g/mol) + (10 x 16.00 g/mol) = 228.25 g/mol. Therefore, the number of moles of resveratrol is 19 g / 228.25 g/mol = 0.0832 mol. Then we divide the moles of solute by the volume of the solution in liters (450 mL = 0.45 L) to get the molarity: 0.0832 mol / 0.45 L = 0.087 M.
To calculate the molality, we need to use the mass of the solvent, which is equal to the mass of the solution minus the mass of the solute. The mass of the solution is 19 g + (0.81 g/mL x 450 mL) = 382.5 g. Therefore, the mass of the solvent is 382.5 g - 19 g = 363.5 g. We convert the mass of the solvent to moles using its molar mass, which is the same as for the solvent.
The molar mass of the solvent is (12 x 1.01 g/mol) + (16 x 16.00 g/mol) = 80.08 g/mol. Therefore, the number of moles of the solvent is 363.5 g / 80.08 g/mol = 4.54 mol. Finally, we divide the moles of solute by the mass of the solvent in kilograms (363.5 g = 0.3635 kg) to get the molality: 0.0832 mol / 0.3635 kg = 0.097 m.
To learn more about molarity and molality, here
https://brainly.com/question/30909953
#SPJ4
The complete question is:
A student dissolves 19. g of resveratrol (C14H1,0) in 450. mL of a solvent with a density of 0.81 g/ml. The student notices that the volume of the solvent Calculate the molarity and molality of the student's solution. Be sure each of your answer entries has the correct number of significant digits. does not change when the resveratrol dissolves in it.
molarity _____
molality _____
a sample of nobr was placed on a 1.00l flask containing no no or br 2 at equilibrium the flask contained
At equilibrium, the concentrations of NO, Br2, and NOBr in the flask will remain constant. However, without specific values for the initial concentration of NOBr or the equilibrium constant (Kc), it's not possible to determine.
.Based on the provided information, it seems that a sample of NOBr was placed in a 1.00 L flask at equilibrium, which means that the NOBr has decomposed into NO and Br2.
At equilibrium, the concentrations of NO, Br2, and NOBr in the flask will remain constant. However, without specific values for the initial concentration of NOBr or the equilibrium constant (Kc), it's not possible to determine the exact concentrations of these substances in the flask.
Visit here to learn more about equilibrium : https://brainly.com/question/4289021
#SPJ11
A sample of NOBr being placed in a 1.00 L flask containing no NO or Br2 at equilibrium, I'll first provide the balanced chemical equation for the reaction:
[tex]2 NOBr (g) ⇌ 2 NO (g) + Br2 (g)[/tex]
At equilibrium, the concentrations of the reactants and products remain constant. To determine the concentrations of NOBr, NO, and Br2 at equilibrium, we need to follow these steps:
1. Write the expression for the equilibrium constant (Kc) based on the balanced chemical equation:
[tex]Kc = [NO]^2 [Br2] / [NOBr]^2[/tex]
2. Set up an ICE (Initial, Change, Equilibrium) table to determine the equilibrium concentrations of the species involved in the reaction. The initial concentrations of NO and Br2 are 0 since they are not initially present in the flask.
NOBr NO Br2
I C0 0 0
C -2x +2x +x
E C0-2x 2x x
3. Substitute the equilibrium concentrations from the ICE table into the Kc expression:
[tex]Kc = (2x)^2 * x / (C0-2x)^2[/tex]
4. To solve for x, you need the value of Kc for the reaction. Look up the Kc value for this reaction in a reference or use provided information. Once you have Kc, substitute it into the equation and solve for x.
5. Calculate the equilibrium concentrations of NOBr, NO, and Br2 by substituting the value of x back into the ICE table:
[NOBr] = C0-2x
[NO] = 2x
[Br2] = x
By following these steps, you can determine the concentrations of NOBr, NO, and Br2 in the 1.00 L flask at equilibrium.
To know more about equilibrium constant (Kc):
https://brainly.com/question/29260433
#SPJ11
if you theoretically performed the bromination of phenol with only one equivalent of br2 which product do you think would predominate
The product that would predominate in the bromination of phenol with only one equivalent of Br2 is the para-bromophenol.
If the bromination of phenol was performed with only one equivalent of Br2, it is more likely that the para product would predominate due to steric hindrance effects that make it difficult for the ortho product to form. The reaction of phenol with Br2 is an electrophilic aromatic substitution where Br+ attacks the electron-rich aromatic ring.
The ortho position is sterically hindered by the presence of the bulky -OH group, making it difficult for the incoming Br+ ion to attack this position. On the other hand, the para position is less hindered, and the incoming Br+ ion can easily attack this position, leading to the predominance of the para product.
Although some ortho product may still form due to the statistical probability of the reaction, it would not be as significant as the para product.
To learn more about bromination of phenol, here
https://brainly.com/question/31325887
#SPJ4
The complete question is:
Had you performed the bromination of phenol with only one equivalent of Br2, which product (ortho or para) do you think would predominate? Hint: think about probability and statistics.
when 1 mole of reacts with to form according to the following equation, 108 kj of energy are evolved. is this reaction endothermic or exothermic?
This is an exothermic reaction because energy is released during the reaction process as 108 kJ of energy are evolved when 1 mole reacts to form product.
When 1 mole reacts to form product according to the given equation, 108 kJ of energy are evolved, which means that energy is being released by the reaction. This release of energy indicates an exothermic reaction as exothermic reaction is a chemical reaction that involves the release of energy.
Learn more about exothermic reaction here:
https://brainly.com/question/13014923
#SPJ11
Based on the fact that energy is being evolved, this reaction is exothermic.
This reaction is exothermic because energy is released (or "evolved") during the reaction. In exothermic reactions, energy is given off as the reactants transform into products, while in endothermic reactions, energy is absorbed from the surroundings. Since 108 kJ of energy is evolved in this case, it confirms that the reaction is exothermic.
To know more about Exothermic Reactions:
https://brainly.com/question/14079389
#SPJ11
F-actin is a polymer of G-actin monomers and exhibits symmetry. (T/F)
F-actin is a polymer of G-actin monomers and exhibits symmetry is a False statement.
A class of globular, multifunctional proteins called actin creates the thin filaments in muscle fibrils as well as the microfilaments in the cytoskeleton. Its mass is around 42 kDa, and its diameter ranges from 4 to 7 nm; it is present in almost all eukaryotic cells, where it may be detected in concentrations of over 100 M.
The monomeric subunit of two different types of filaments in cells—thin filaments, a component of the contractile apparatus in muscle cells, and microfilaments, one of the three main elements of the cytoskeleton—is an actin protein. Both G-actin and F-actin, which are present either as a free monomer termed G-actin (globular) or as a component of a linear polymer microfilament known as F-actin (filamentous), are necessary for such crucial cellular processes.
Learn more about Actin:
https://brainly.com/question/23185374
#SPJ4
F-actin is a polymer of G-actin monomers and exhibits symmetry is a False statement.
A class of globular, multifunctional proteins called actin creates the thin filaments in muscle fibrils as well as the microfilaments in the cytoskeleton. Its mass is around 42 kDa, and its diameter ranges from 4 to 7 nm; it is present in almost all eukaryotic cells, where it may be detected in concentrations of over 100 M.
The monomeric subunit of two different types of filaments in cells—thin filaments, a component of the contractile apparatus in muscle cells, and microfilaments, one of the three main elements of the cytoskeleton—is an actin protein. Both G-actin and F-actin, which are present either as a free monomer termed G-actin (globular) or as a component of a linear polymer microfilament known as F-actin (filamentous), are necessary for such crucial cellular processes.
Learn more about Actin:
brainly.com/question/23185374
#SPJ11
we must perform dilutions of absorbance values above 1.00 since not enough light is getting through the sample as it is heavily concentrated with solutes question 7 options: true false
True. Absorbance values above 1.00 indicate that the sample is heavily concentrated with solutes, which can limit the amount of light that passes through the sample.
Dilution is necessary to reduce the concentration of solutes in the sample and allow more light to pass through, enabling accurate measurement of the absorbance values.
Dilution involves adding a solvent to the sample to decrease its concentration while maintaining the same proportion of solutes. The diluted sample can then be re-analyzed to obtain absorbance values within the linear range of the spectrophotometer.
It is important to note that proper dilution factors must be calculated and applied accurately to avoid errors in the final results. Dilution is a commonly used technique in many scientific fields, including biochemistry, molecular biology, and environmental science.
To learn more about : solutes
https://brainly.com/question/25326161
#SPJ11
addictive substances, for which demand is inelastic, are products for which producers can pass higher costs on to consumers.
The statement is correct. Producers of addictive substances, for which demand is inelastic, can pass higher costs on to consumers.
Inelastic demand refers to a situation where changes in price have little effect on the quantity demanded of a product. Addictive substances, such as tobacco or drugs, often have inelastic demand because users are willing to pay high prices for the product regardless of changes in price.
Producers of addictive substances can take advantage of this inelastic demand by increasing prices without seeing a significant decrease in demand. This means that they can pass on any higher costs, such as increased taxes or production costs, to the consumers, who are likely to continue purchasing the product even at a higher price.
This is often seen in the tobacco industry, where governments may increase taxes on cigarettes as a way to discourage smoking, but the tobacco companies can simply pass on the higher costs to consumers who continue to buy the product.
Therefore, it can be concluded that producers of addictive substances, for which demand is inelastic, can pass higher costs on to consumers.
To learn more about addictive substances, here
https://brainly.com/question/15085682
#SPJ4
how many atmospheres of pressure would there be if you started at 5.75 atm and changed the volume from 5 l to 1 l ?
The pressure would be 28.75 atm if the volume is changed from 5 L to 1 L, starting from an initial pressure of 5.75 atm.
To solve this problem, we can use the combined gas law equation, which relates the pressure, volume, and temperature of a gas:
P1V1/T1 = P2V2/T2
where P1 and V1 are the initial pressure and volume, T1 is the initial temperature, P2 and V2 are the final pressure and volume, and T2 is the final temperature. Since the temperature is constant in this problem, we can simplify the equation to:
P1V1 = P2V2
Substituting the given values, we get:
5.75 atm × 5 L = P2 × 1 L
Solving for P2, we get:
P2 = (5.75 atm × 5 L) / 1 L = 28.75 atm.
For such more questions on Pressure:
https://brainly.com/question/24719118
#SPJ11
what is the maximum amount of heat in joules that 23 grams of water at 95oc can lose before freezing completely?
23 grams of water at 95°C can lose a maximum of 8883.64 Joules of heat before freezing completely.
To answer your question, we need to calculate the heat loss required to lower the temperature of 23 grams of water from 95 degrees Celsius to 0 degrees Celsius, which is the freezing point of water. The specific heat capacity of water is 4.184 Joules per gram per degree Celsius.
So, the initial energy of the water is:
E1 = m x c x ΔT
E1 = 23 g x 4.184 J/g°C x (95°C - 0°C)
E1 = 8883.64 J
Where E1 is the initial energy of the water, m is the mass of water, c is the specific heat capacity of water, and ΔT is the change in temperature.
The final energy of the water at 0°C is:
E2 = m x c x ΔT
E2 = 23 g x 4.184 J/g°C x (0°C - 0°C)
E2 = 0 J
So, the maximum amount of heat in joules that 23 grams of water at 95°C can lose before freezing completely is:
ΔE = E1 - E2
ΔE = 8883.64 J - 0 J
ΔE = 8883.64 J
Learn more about joules here: brainly.com/question/25982371
#SPJ11
the sds for 1-octanol is provided here. (links to an external site.) is 1-octanol a combustible liquid?
True. 1-octanol is a combustible liquid with a flashpoint of 86°C and an auto-ignition temperature of 258°C, according to the provided SDS.
The SDS (Safety Data Sheet) for 1-octanol indicates that it is a combustible liquid. According to the SDS, 1-octanol has a flashpoint of 86°C (187°F) and an auto-ignition temperature of 258°C (496°F). These values suggest that 1-octanol can easily ignite in the presence of an ignition source and may burn at relatively low temperatures. Additionally, the SDS provides information on the fire and explosion hazards associated with 1-octanol and recommends appropriate handling procedures and precautions to minimize the risk of fire or explosion. Therefore, it is important to handle 1-octanol with care and follow appropriate safety protocols when working with this substance.
To learn more about combustible liquid, refer:
https://brainly.com/question/28222891
#SPJ4
The complete question is:
the SDS for 1-octanol is provided here. (links to an external site.) is 1-octanol a combustible liquid? True or False.
you have 400 grams (g) of a substance with a half life of 10 years. how much is left after 100 years?
After 100 years, there will be 6.25 grams of the substance remaining.
What is half life?Half-life is the time it takes for half of the radioactive atoms in a sample to decay or for the concentration of a substance to decrease by half.
Amount remaining = initial amount x (1/2)^(number of half-lives)
In this case, half-life of the substance is 10 years, which means that after 10 years, half of the substance will have decayed. After another 10 years (20 years total), half of remaining substance will decay, leaving 1/4 of the original amount. After another 10 years (30 years total), half of that remaining amount will decay, leaving 1/8 of the original amount. This process continues every 10 years.
To find the amount of substance remaining after 100 years, we need to know how many half-lives have occurred in that time: 100 years / 10 years per half-life = 10 half-lives
Amount remaining = 400 g x (1/2)¹⁰= 6.25 g
Therefore, after 100 years, there will be 6.25 grams of the substance remaining.
To know more about half life, refer
https://brainly.com/question/25750315
#SPJ1
f the barometer read 765.2 mmhg when the measurement in in the figure below took place, what is the pressure of the gas in the flask in kilopascals?
The pressure of the gas in the flask in kilopascals is given by the term 100.3 kPa, option E.
The pressure of any gas is a crucial characteristic. In contrast to qualities like viscosity and compressibility, we have some experience with gas pressure. Every day, the TV meteorologist reports the value of the atmosphere's barometric pressure.
We have included numerous slides on gas pressure in the Beginner's Guide since comprehending what pressure is and how it works is so essential to understanding aerodynamics. It is possible to investigate how static air pressure varies with altitude using an interactive atmosphere simulator. You can see how the pressure changes around a lifting wing using the FoilSim software.
height difference, h, indicates pressure of gas relative to atmospheric pressure.
h= 13mm
barometric pressure =765.2mmHg (atmosphere)
-from the picture, we can see that atmospheric pressure is greater than the gas pressure. so we minus
765.2mm - 13mm= 752.2mmHg
752.2mmHg * (101.3kPa / 760mmHg) = 100.3kPa.
Learn more about Pressure of gas:
https://brainly.com/question/30003139
#SPJ4
Complete question:
If the barometer read 765.2 mmHg when the measurement in in the Figure below took place, what is the pressure of the gas in the flask in kilopascals?
A. 7.55 kPa
B. 102.4 kPa
C. 1.007 kPa
D. 752.2 kPa
E. 100.3 kPa
Can someone please help !! I just need someone to help me figure out how to solve it and solve the picture as an example
The molar concentration of Al(OH)₃ in the solution is 1.61 M.
we need to calculate the number of moles of Al(OH)3 in the solution:
Number of moles of Al(OH)₃ = mass of Al(OH)3 / molar mass of Al(OH)3
Molar mass of Al(OH)₃ = (1 x atomic mass of Al) + (3 x atomic mass of O) + (3 x atomic mass of H)
Molar mass of Al(OH)₃ = (1 x 26.98 g/mol) + (3 x 16.00 g/mol) + (3 x 1.01 g/mol) = 78.00 g/mol
Number of moles of Al(OH)₃ = 62.7 g / 78.00 g/mol = 0.804 moles
Next, we need to calculate the volume of the solution in liters:
Volume of solution = 500.0 mL = 500.0 mL x (1 L/1000 mL) = 0.500 L
Finally, we can calculate the molar concentration of Al(OH)₃
Molarity = moles of solute/volume of solution in liters
Molarity = 0.804 moles / 0.500 L = 1.61 M
Therefore, the molar concentration of Al(OH)₃ in the solution is 1.61 M.
learn more about Molar Mass here
https://brainly.com/question/837939
#SPJ1
What is the volume of a 1.5 M solution containing 2 moles of solutes?
the number of moles of solvent divided by the number of liters of solution.
In chemistry, why are moles significant?The mole idea enables us to weigh macroscopically small quantities of matter and count molecules and atoms because they are so minuscule. To calculate the stoichiometry of reactions, a standard is established. A description of the characteristics of gases is given in paragraph three.
Is 1M a mole?A 1 molar (1M) liquid is defined as a substance that has been dissolved in 1 mole of liquid (i.e., 1mol/L), while a 0.5 molecule (0.5M) solution is defined as a substance that has been dissolved in 2 mol/L of liquid.
To know more about moles visit:
https://brainly.com/question/26416088
#SPJ1
electrons can only gain energy by leaving the atom (creating an ion). electrons move between discrete energy levels, or escape the atom if given enough energy. electrons can have any energy below the ionization energy within the atom, or escape if given enough energy. electrons can have any energy within the atom, and cannot be given enough energy to cause them to escape the atom. electrons move between discrete energy levels within the atom, and cannot accept an amount of energy that causes them to escape the atom. 5 points saved question 7 the spectrum from an incandescent (with a filament) light bulb is a(n) continuous spectrum. emission line spectrum. absorption line spectrum.
The spectrum from an incandescent light bulb with a filament is a continuous spectrum. This means that the light emitted contains all colors of the visible spectrum, appearing as a smooth, uninterrupted rainbow
Electrons in an atom can only gain energy by leaving the atom and creating an ion. They can move between discrete energy levels or escape the atom if given enough energy. Electrons can have any energy below the ionization energy within the atom or escape if given enough energy.
However, electrons can have any energy within the atom and cannot be given enough energy to cause them to escape the atom. They move between discrete energy levels within the atom and cannot accept an amount of energy that causes them to escape the atom.
In contrast, an emission line spectrum appears as a series of bright lines against a dark background, while an absorption line spectrum appears as a series of dark lines against a bright background.
The type of spectrum emitted depends on the source of the light and the composition of the material emitting the light.
To learn more about : spectrum
https://brainly.com/question/2187993
#SPJ11
How many 1H NMR signals does CH3OCH2CH(CH3)2 show? How many^1H NMR signals does CH_3OCH_2CH(CH_3)_2 show? Enter your answer in the provided box.
.......................
The number of the NMR signals compound CH3OCH2CH(CH3)2 shows are:
3 H with singlet.6 H with doublet.1 H with muliplet.2 H with doublet.A spectroscopic method for observing the local magnetic fields around atomic nuclei is nuclear magnetic resonance spectroscopy, sometimes referred to as magnetic resonance spectroscopy (MRS) or NMR spectroscopy.
This spectroscopy's foundation is the measurement of electromagnetic radiations' absorption in the radio frequency range between 4 and 900 MHz. Nuclear Magnetic Resonance Spectroscopy is the name given to the form of spectroscopy that is used to measure the absorption of radio waves in the presence of a magnetic field.
The sample is put in a magnetic field, and the nuclear magnetic resonance (NMR) signal is generated by radio waves excitation of the sample's nuclei, which is detected by sensitive radio receivers.
Learn more about NMR signals:
https://brainly.com/question/30583972
#SPJ4
The number of the NMR signals compound CH3OCH2CH(CH3)2 shows are:
3 H with singlet.
6 H with doublet.
1 H with muliplet.
2 H with doublet.
A spectroscopic method for observing the local magnetic fields around atomic nuclei is nuclear magnetic resonance spectroscopy, sometimes referred to as magnetic resonance spectroscopy (MRS) or NMR spectroscopy.
This spectroscopy's foundation is the measurement of electromagnetic radiations' absorption in the radio frequency range between 4 and 900 MHz. Nuclear Magnetic Resonance Spectroscopy is the name given to the form of spectroscopy that is used to measure the absorption of radio waves in the presence of a magnetic field.
The sample is put in a magnetic field, and the nuclear magnetic resonance (NMR) signal is generated by radio waves excitation of the sample's nuclei, which is detected by sensitive radio receivers.
Learn more about NMR signals:
brainly.com/question/30583972
#SPJ11
mercury has the widest variation in surface temperatures between night and day of any planet in the solar system.
Mercury has the widest variation in surface temperatures between night and day of any planet in the solar system.
This statement is true. Mercury experiences the greatest temperature variation between night and day due to several factors. The main reasons are its proximity to the Sun, slow rotation, and lack of atmosphere.
During the daytime, temperatures on Mercury can reach up to 800°F (430°C) due to its close proximity to the Sun. This extreme temperature difference is due to the fact that Mercury's thin atmosphere is unable to regulate temperature and its slow rotation causes one side of the planet to be constantly facing the sun while the other is in perpetual darkness.
At night, temperatures can drop as low as -290°F (-180°C) because of its slow rotation and the lack of an atmosphere to retain heat. This results in the widest variation in surface temperatures between night and day of any planet in our solar system.
To know more about Mercury Variations in surface temperature:
https://brainly.com/question/16117265
#SPJ11
Mercury indeed has the widest variation in surface temperatures between night and day of any planet in the solar system. This is primarily due to its thin atmosphere, which cannot effectively retain heat, leading to extreme temperature fluctuations.
Mercury, being the closest planet to the sun, experiences extreme variations in temperature between its day and night sides. During the day, when the sun is overhead, the surface temperature on Mercury can rise to a scorching 430°C (800°F), which is hot enough to melt lead. However, as Mercury rotates and the sun sets, the temperature drops drastically to as low as -180°C (-290°F) at night.
The main reason for this extreme temperature variation is that Mercury has no atmosphere to regulate its surface temperature. Unlike Earth, which has an atmosphere that helps to distribute heat around the planet, Mercury's surface is directly exposed to the sun's radiation. This means that when the sun is shining on Mercury's surface, it heats up quickly and intensely, causing the temperature to rise to extreme levels.
Overall, the lack of an atmosphere and Mercury's proximity to the sun are the main factors contributing to the extreme temperature variations on the planet.
Learn more about atmosphere here:
https://brainly.com/question/11192430
#SPJ11
What are the PEL levels for Sb51
PEL levels for a particular substance, such as Antimony, may vary depending on the country, jurisdiction, and specific industry or work environment.
What is PEL?"PEL" stands for "Permissible Exposure Limit," which is a term used in occupational health and safety regulations to denote the maximum amount or concentration of a hazardous substance that a worker may be exposed to over a specified time period without adverse health effects.
Therefore, it is important to refer to the relevant occupational health and safety regulations or guidelines in your specific area or industry for accurate and up-to-date information on the PEL levels for Antimony or any other hazardous substance.
These regulations are typically established by government agencies, such as the Occupational Safety and Health Administration (OSHA) in the United States or the Health and Safety Executive (HSE) in the United Kingdom.
Learn more about PEL levels here: https://brainly.com/question/5428869
#SPJ1