2. Fossil fuel has been used more in the

existing world​

Answers

Answer 1

Answer: fossil fuels are using more in the existing world because fossil fuels are of great importance because they can burned producing significant amount of energy prr unit mass the use of coal as a fuel prefates recorded history

Explanation:

Answer 2

Answer:

A fossil fuel is a fuel formed by natural processes, such as anaerobic decomposition of buried dead organisms, containing organic molecules originating in ancient photosynthesis[1] that release energy in combustion.[2] Such organisms and their resulting fossil fuels typically have an age of millions of years, and sometimes more than 650 million years.[3] Fossil fuels contain high percentages of carbon and include petroleum, coal, and natural gas.[4] Peat is also sometimes considered a fossil fuel.[5] Commonly used derivatives of fossil fuels include kerosene and propane. Fossil fuels range from volatile materials with low carbon-to-hydrogen ratios (like methane), to liquids (like petroleum), to nonvolatile materials composed of almost pure carbon, like anthracite coal. Methane can be found in hydrocarbon fields alone, associated with oil, or in the form of methane clathrates.

Coal, a fossil fuel

As of 2018, the world's main primary energy sources consisted of petroleum (34%), coal (27%), and natural gas (24%), amounting to an 85% share for fossil fuels in primary energy consumption in the world. Non-fossil sources included nuclear (4.4%), hydroelectric (6.8%), and other renewables (4.0%, including geothermal, solar, tidal, wind, wood, and waste).[6] The share of renewables (including traditional biomass) in the world's total final energy consumption was 18% in 2018.[7] Compared with 2017, world energy-consumption grew at a rate of 2.9%, almost double its 10-year average of 1.5% per year, and the fastest since 2010.[8]

Although fossil fuels are continually formed by natural processes, they are generally classified as non-renewable resources because they take millions of years to form and known viable reserves are being depleted much faster than new ones are generated.[9][10]

Most air pollution deaths are due to fossil fuel combustion products, it is estimated to cost over 3% of global GDP,[11] and fossil fuel phase-out would save 3.6 million lives each year.[12]

The use of fossil fuels raises serious environmental concerns. The burning of fossil fuels produces around 35 billion tonnes (35 gigatonnes) of carbon dioxide (CO2) per year.[13] It is estimated that natural processes can only absorb a small part of that amount, so there is a net increase of many billion tonnes of atmospheric carbon dioxide per year.[14] CO2 is a greenhouse gas that increases radiative forcing and contributes to global warming and ocean acidification. A global movement towards the generation of low-carbon renewable energy is underway to help reduce global greenhouse-gas emissions.


Related Questions

Objects in free fall are weightless.


Please select the best answer from the choices provided

T
F

Answers

Answer:

[tex]\boxed{True}[/tex]

Explanation:

Objects are weightless in free fall because their is no other force pushing them rather than the gravitational force.

Hope it helps!<3

Answer:

It's ture hope this answer help have a great day .!

Explanation:

Look at this model of an atom. Using a periodic table, which element does it represent?

Answers

Answer:

Nitrogen

Explanation:

A block that slides on a rough surface slows down and eventually stops. The reverse process never occurs. That is, a block at rest never begins to move and accelerate on a rough surface without the action of an external agent. The second situation is forbidden because it would violate:_________.
a) conservation of total energy
b) conservation of momentum
c) the first law of thermodynamics
d) the second law of thermodynamics
e) both the first and second law of thermodynamics
Gracias.

Answers

Answer:

d) the second law of thermodynamics

Explanation:

Here we take an example

The entropy represents a measurement of the energy dispersal in the system. Also, the campfire would an entropy example. The burning of the solid wood and then it became the ash, smoke and gases this all would be spread the energy to the outward as compared to the solid fuel

Therefore as per the given statement, the correct option is d.

True/False: The core, mantle, and crust explanation for the Earth's layers is outdated and now we use the 5 layer explanation. *

Answers

Answer:

False

Explanation:

We still use the old way. It's easier to understand the old way, and its NOT outdated.

A mass m is located at the origin; a second mass m is at x = d. A third mass m is above the first two so the three masses form an equilateral triangle. What is the net gravitational force on the third mass?

Answers

Answer:

√3 * Gm²/d²

Explanation:

m1 = m, m2= m, distance = d. hence:

F = Gm²/d²

Let the origin be A, the point x = d be B and the point above the first two is C.

The net force acting on the third mass (point C) [tex]F_{net}[/tex] = [tex]F_A+F_B[/tex]

Let j represent the vertical component and i the horizontal component. Hence:

[tex]F_B=-F_j\\\\F_A=-F(icos\frac{\pi}{6}+jsin\frac{\pi}{6} )=-F(i\frac{\sqrt{3} }{2}+j\frac{1}{2} )\\\\F_{net} =F_A+F_B\\\\F_{net} =-F_j+{-F(i\frac{\sqrt{3} }{2}+j\frac{1}{2} )}\\\\F_{net} =-\frac{F}{2} \sqrt{3}(i+j\sqrt{3} )\\\\The\ magnitude\ of\ the\ net\ force\ is:\\\\|F_{net}|=\frac{F}{2}\sqrt{3}(\sqrt{1^2+\sqrt{3}^2 })=\frac{F}{2} \sqrt{3}(\sqrt{4})\\\\|F_{net}|=\frac{F}{2} \sqrt{3}*2=F*\sqrt{3}\\\\|F_{net}|=\sqrt{3}*\frac{Gm^2}{d^2}[/tex]

Answer:

The net gravitational force on the third mass = [tex]3^{0.5} * \frac{Gm^2}{d^2}[/tex]

Explanation:

For equilateral triangle,

[tex]\theta = 30^o[/tex]

Force between masses,

[tex]F_1 = \frac{G*m*m}{d^2}\\\\F_! = \frac{Gm^2}{d^2}[/tex]

Therefore,

[tex]F_net = 2F_1cos\theta\\\\F_net = 2 * \frac{Gm^2}{d^2} * cos30\\\\F_net = 3^{0.5} * \frac{Gm^2}{d^2}[/tex]

For more information on this visit

https://brainly.com/question/23379286

Two spheres of equal mass, A and B, are projected off the edge of a 1.0 m bench.    Sphere A has a horizontal velocity of 10 m/s and sphere B has a horizontal velocity of 5 m/s.

__ 5.    If both spheres leave the edge of the table at the same instant, sphere A will land
a.    at some time after sphere B.
b.    at the same time as sphere B.
c.    at some time before sphere B.
d.    There is not enough information to decide.

__ 6.    If both spheres leave the edge of the table at the same instant, sphere A hits the floor at the spot marked X.  Sphere B will hit the floor
a.    at some point between the edge of the table and X.
b.    at some point past X.
c.    at the same distance from the table as X.
d.    there is not enough information to decide.

Answers

Answer:

c. because A will land first becuase its heavier

and D.

Explanation:

what type of plate boundary decreases the amount of the Earth's crust?

Answers

Answer:

Convergent.

Explanation:

Just as oceanic crust is formed at mid-ocean ridges, it is destroyed in subduction zones. Subduction is the important geologic process in which a tectonic plate made of dense lithospheric material melts or falls below a plate made of less-dense lithosphere at a convergent plate boundary.

A car is moving at 25.5 m/s when it accelerates at 1.94 m/s^2 for 2.3 s. What is the car's final speed? (Keep in mind direction and round to 2 decimals)

Answers

Answer:

29.96m/s

Explanation:

Given parameters:

Initial speed  = 25.5m/s

Acceleration  = 1.94m/s²

Time  = 2.3s

Unknown:

Final speed of the car  = ?

Solution:

To solve this problem, we are going to apply the right motion equation:

    v = u  + at

v is the final speed

u is the initial speed

a is the acceleration

t is the time taken

 Now insert the parameters and solve;

      v  = 25.5 + (1.94 x 2.3)  = 29.96m/s

Which of the following cars have the most kinetic energy

Answers

Hey There!_____________________________________Answer:

[tex]\huge\boxed{OptionA}[/tex]

_____________________________________DATA:Blue Car:

mass = 4 kg

velocity = 5 m/s^2

Orange truck:

Mass= 2kg

Velocity = 7m/s^2

Grey Car:

mass = 6 kg

velocity = 4m/s^2

Green Car:

Mass = 8 kg

Velocity = 3 m/s^2

_____________________________________SOLUTION:

By the equation of kinetic energy,

                                       

                                         K.E = [tex]\frac{1}{2} mv^2[/tex]

Where,

            K.E is kinetic energy

            m is mass

            v is velocity

_____________________________________Kinetic energy of Blue car:

 

Directly substitute the variables in the equation,

                                       

                                       K.E = [tex]\frac{1}{2}x4x5^2[/tex]

Simplify the equation,

                                       K.E = 50 J

_____________________________________Kinetic Energy of Silver Car:

                                           

 Directly substitude the variable in the equation,

                                                           

                                        K.E = [tex]\frac{1}{2}x6x4^2[/tex]

Simplify the equation,

                                        K.E = 48J

_____________________________________Kinetic Energy of Green Car:

Substitute the variables in the equation,

                                         

                                         K.E = [tex]\frac{1}{2}x8x3^2[/tex]

Simplify the Equation,

                                         

                                         K.E = 36J

_____________________________________Kinetic Energy of Orange Truck:

Substitute the variable,

                                        K.E = [tex]\frac{1}{2}x 2x7^2[/tex]

Simplify the equation,

                                     

                                        K.E = 49J

_____________________________________

As you can see that the highest value of kinetic energy is of Blue SUV thus it will be out answer.

_____________________________________Best Regards,'Borz'

In a step-down transformer the secondary coil is made of thick copper coil.
Explain
(2 marks)​

Answers

Answer:

In a step-up transformer, the secondary coil is made of same wire as the primary coil but it is rolled with the presence of the insulated which never conduct the opposite current to the coil.

Hence it function property without meeting any fire and other problem.

Even if you want to get clear ideas, then you have to go with official website.

When a transformer is in operation, there are ac currents in primary and secondary coils. ... This is the most important for the high current winding (the secondary coil of a step-down transformer). Thick copper wire is used for this winding, because thick wire of low resistivity has a low resistance.

19. What energy transformation occurs in a battery?
A. chemical energy to thermal energy
C. electric energy to chemical energy
B. chemical energy to electric energy
D. thermal energy to chemical energy

Answers

i think correct answer is b

Answer:

B.chemical energy changes to electric energy.

Explanation:

I hope l helped you. ❤❤

The image shows a diagram explaining a concept.

Which concept does the diagram show?
A. tempature
B. Altitude
C. air density
D. air pressure

Answers

Answer:

D.

Explanation

Air pressure.

Answer:air pressure

Explanation:

Sadie rolls a marble down a ramp. When the marble reaches the bottom of the ramp, it then rolls across the floor. After a few seconds, the marble slows down, then stops. What caused the marble to stop? *
A Friction between the marble and the floor.
B Air pressure pushing down on the marble.
C The force of gravity pulling the marble down.
D Magnetic attraction between Earth and the marble.

Answers

The correct answer would be A.

Using a light microscope, a student identified the following characteristics of four organisms found in a sample of pond water. Based on the observations of the student,
which organisms most likely belong to the taxonomic group for bacteria?
Pond-Water Organisms
Organism 1 Single-celled, nucleus, large vacuole
Organism 2 Single-celled, no nucleus, cell wall
Organism 3 Single-celled, no nucleus
Organism 4 Single-celled, nucleus
Organism 1 and 4
Organism 1 and 2
Organism 3 and 4
Organism 2 and 3

Answers

Answer:

Organisms 2 and 3

Explanation:

The space shuttle releases a satellite into a circular orbit 630 km above the Earth.
How fast must the shuttle be moving (relative to Earth's center) when the release occurs?

Answers

Answer:

7,539 m/s

Explanation:

Let's use this equation to find the gravitational acceleration of this space shuttle:

[tex]\displaystyle g=\frac{GM}{r^2}[/tex]

We know that G is the gravitational constant: 6.67 * 10^(-11) Nm²/kg².

M is the mass of the planet, which is Earth in this case: 5.972 * 10^24 kg.

r is the distance from the center of Earth to the space shuttle: radius of Earth (6.3781 * 10^6 m) + distance above the Earth (630 km → 630,000 m).

Plug these values into the equation:

[tex]\displaystyle g=\frac{(6.67\cdot 10^-^1^1 \ Nm^2kg^-^2)(5.972\cdot 10^2^4 \ kg)}{[(6.3781\cdot 10^6 \ m)+(630000 \ m)]^2}[/tex]

Remove units to make the equation easier to read.

[tex]\displaystyle g=\frac{(6.67\cdot 10^-^1^1 )(5.972\cdot 10^2^4 )}{[(6.3781\cdot 10^6)+(630000 )]^2}[/tex]

Multiply the numerator out.

[tex]\displaystyle g=\frac{(3.983324\cdot 10^1^4)}{[(6.3781\cdot 10^6)+(630000 )]^2}[/tex]

Add the terms in the denominator.

[tex]\displaystyle g=\frac{(3.983324\cdot 10^1^4)}{[(7008100)]^2}[/tex]

Simplify this equation.

[tex]\displaystyle g=8.11045189 \ \frac{m}{s^2}[/tex]

The acceleration due to gravity g = 8.11045189 m/s². Now we use the equation for acceleration for an object in circular motion which contains v and r.

[tex]\displaystyle a = \frac{v^2}{r}[/tex]

a = g, v is the velocity that the space shuttle should be moving (what we are trying to solve for), and r is the radius we had in the previous equation when solving for g.

Plug these values into the equation and solve for v.

[tex]\displaystyle 8.11045189 \ \frac{m}{s^2} = \frac{v^2}{7008100 \ m}[/tex]  

Remove units to make the equation easier to read.

[tex]\displaystyle 8.11045189 = \frac{v^2}{7008100}[/tex]

Multiply both sides by 7,008,100.

[tex]56838857.89=v^2[/tex]

Take the square root of both sides.

[tex]v=7539.154985[/tex]

The shuttle should be moving at a velocity of about 7,539 m/s when it is released into the circular orbit above Earth.

1. Derive the equation of the trajectory of a projectile.
(3mks)
2. A ball is thrown with an initial speed uof 30 m/s at an angle & above thehorizontal, where
sin 0 = 4/5 and cos 0 = 3/5.
(5mks)
(a) decompose the vector u into itsx and y components.
(b) When t= 2 s, find the position of the ball andthe magnitude and direction of its
velocityu.
(c) Determine
the value
of the highest point of the ball's trajectory.
(d) calculate how much time has elapsed forthe ball to reach the highest point.
(e) Calculate the values of the total time of theball's flight T and the horizontal range R.
ASAN
3. In the model of the hydrogen atom proposed by Niels Bohr an electron circulatesa
stationary proton in a circle of radius 7' = 5.28 x 10-11 m with a speedı= 2.18 x 106m's
(a) Find the magnitude of the electron sradial acceleration in this model.
(1mk)
(b) Determine the period of the motion,
(Imk)​

Answers

We should be lovers instead

Define a rotation of the earth answer fast

Answers

Answer:

here u go

Explanation:

Earth's rotation is the rotation of planet Earth around its own axis. Earth rotates eastward, in prograde motion. As viewed from the north pole star Polaris, Earth turns counterclockwise.

What power does a toaster with 15 A of current and 20 Ωof resistance consume?

Answers

Answer:

4500W

Explanation:

[tex]P = {I}^{2} R[/tex]

where P = Power consumed , I = Current & R = Resistance.

In the question it's given that

I = 15A ; R = 20Ω

So ,

[tex]P = {15}^{2}\times 20 = 225 \times 20 = 4500W[/tex]

4500w is the answer to this question

What effect does atmospheric pressure have on density?

Answers

Answer:sometimes it commits to how it will happen

Explanation:

Answer:

Atmospheric pressure increases density

Explanation:

Atmospheric pressure decreases the volume of space, since volume is inversely proportional to density, density will increase.

If a neutral atom has 25 protons in its nucleus. What is the number of surrounding electrons? Explain your answer.

Answers

Answer:

25 electrons.

Explanation:

In a neutral atom, the number of protons is equal to the number of electrons, therefore there are 25 protons and 25 electrons.

Final Answer: 25 electrons

Explanation/Reasoning:

Hey there!

The number of protons in the nucleus of a neutral atom would have 25 protons. This is because it is equal to the atomic number.

The number of protons is equal to the number of electrons. So for our answer, the number of atoms in a neutral atom will be 25 electrons because the neutral atom had 25 protons.

~I hope I helped you :)~

The ancestors of horses possess feet with five digits . Over time with the development of grassland the digits fused and former hooves . What evolutionary advantage did this transformation serve

Answers

Answer:

It enabled them to run faster from predators.

Explanation:

The evolution of hooves from a five-digit feet enabled horses to run faster from predators as well as support their larger weights and longer legs. Hope this helped and have an awesome day! :)

It enabled them to run faster from predators. ]

Explanation: The evolution of hooves from a five-digit feet enabled horses to run faster from predators as well as support their larger weights and longer legs.

What is the slope of the line that passes through the points (-8, -3)(−8,−3) and (-12, -3) ?(−12,−3)? Write your answer in the simplest form.
single black dude

Answers

Notice that both of those points are 3 units below the x-axis. So the line is horizontal ... its slope is zero.

Can cause a stationary object to start moving or moving object to change its speed or direction or both

Answers

Answer:

Force

Explanation:

Only a force can cause a stationary object to move or a moving object to change its speed or direction.

What is the change in potential energy in moving a 10kg box from the floor to a table 1 m high?

Answers

Explanation:

potential energy formula is 1/2 mv2(this 2 is square).

m means mass and v means velocity.

now, you can calculate

The change in potential energy in moving a 10kg box from the floor to a table 1 m high is 98 Joules.

To find the potential energy, the given values are,

Mass of the box = 10Kg

Height h = 1 m

What is Potential energy?

The potential energy can be defined as the energy that is stored and that can be determined through various parts in a particular system.

Also, the energy will gets stored when the object is not moving.

For example: Spring. Even when the spring is not stretched or contracted it stores energy.

The formula for Potential energy PE= mgh joules.

m is the Mass,

g is the acceleration due to gravity = 9.8 m/s²,

h is the height.

Substituting all the given values,

Potential Energy= 10 (9.8)(1)

PE= 98 J

Thus the potential energy of the box= 98 J.

To learn more about the potential energy,

https://brainly.com/question/13548111

#SPJ2

A 0.60-kg mass at the end of a spring vibrates 3.0 times per second with and amplitude of 0.13m. Determine
(a) The velocity when it passes the equilibrium point,
(b) The velocity when it is 0.10 m from equilibrium
(c) The total energy of the system, and
(d) The equation describing the motion of the mass, assuming the x was a maximum at t = 0.

Answers

Answer:

a) The velocity when it passes the equilibrium point is [tex]\pm 2.451[/tex] meters per second.

b) The velocity when it is 0.10 meters from equilibrium is [tex]\pm 1.567[/tex] meters per second.

c) The total energy of the system is 1.802 joules.

d) The equation describing the motion of the mass, assuming that initial position is a maximum is [tex]x(t) = 0.13\cdot \sin (18.850\cdot t +0.5\pi)[/tex].

Explanation:

a) If all non-conservative forces can be neglected and spring has no mass, then the mass-spring system exhibits a simple harmonic motion (SHM). The kinematic formula for the position of the system ([tex]x(t)[/tex]), measured in meters, is:

[tex]x(t) = A\cdot \sin(\omega \cdot t +\phi)[/tex] (1)

Where:

[tex]A[/tex] - Amplitude, measured in meters.

[tex]\omega[/tex] - Angular frequency, measured in radians per second.

[tex]t[/tex] - Time, measured in seconds.

[tex]\phi[/tex] - Phase, measured in radians.

The kinematic equation for the velocity formula of the system ([tex]v(t)[/tex]), measured in meters per second, is derived from (1) by deriving it in time:

[tex]v(t) = \omega\cdot A\cdot \cos (\omega\cdot t+\phi)[/tex] (2)

The velocity when it passes the equilibrium point occurs when the cosine function is equal to 1 or -1. Then, that velocity is determined by following formula:

[tex]v = \pm \omega\cdot A[/tex] (3)

The angular frequency is calculated by this expression:

[tex]\omega = 2\pi\cdot f[/tex] (4)

Where [tex]f[/tex] is the frequency, measured in hertz.

If we know that [tex]f = 3\,hz[/tex] and [tex]A = 0.13\,m[/tex], then the velocity when it passes the equilibrium point, which is the maximum and minimum velocities of the mass:

[tex]\omega = 2\pi\cdot (3\,hz)[/tex]

[tex]\omega \approx 18.850\,\frac{rad}{s}[/tex]

[tex]v = \pm \left(18.850\,\frac{rad}{s} \right)\cdot (0.13\,m)[/tex]

[tex]v = \pm 2.451\,\frac{m}{s}[/tex]

The velocity when it passes the equilibrium point is [tex]\pm 2.451[/tex] meters per second.

b) First, we need to determine the spring constant of the system ([tex]k[/tex]), measured in newtons per meter, in terms of the angular frequency ([tex]\omega[/tex]), measured in radians per second, and mass ([tex]m[/tex]), measured in kilograms. That is:

[tex]k = \omega^{2}\cdot m[/tex] (5)

If we know that [tex]\omega \approx 18.850\,\frac{rad}{s}[/tex] and [tex]m = 0.60\,kg[/tex], then the spring constant is:

[tex]k = \left(18.850\,\frac{rad}{s} \right)^{2}\cdot (0.60\,kg)[/tex]

[tex]k = 213.194\,\frac{N}{m}[/tex]

Lastly, we determine the velocity when the mass is 0.10 meters from equilibrium by the Principle of Energy Conservation:

[tex]U_{k} + K = K_{max}[/tex] (6)

[tex]\frac{1}{2}\cdot k\cdot x^{2} + \frac{1}{2}\cdot m\cdot v^{2} = \frac{1}{2}\cdot m\cdot v_{max}^{2}[/tex] (7)

Where:

[tex]U_{k}[/tex] - Current elastic potential energy, measured in joules.

[tex]K[/tex] - Current translational kinetic energy, measured in joules.

[tex]K_{max}[/tex] - Maximum translational kinetic energy, measured in joules.

[tex]v[/tex] - Current velocity of the system, measured in meters per second.

[tex]m[/tex] - Mass, measured in kilograms.

[tex]v_{max}[/tex] - Maximum velocity of the system, measured in meters per second.

If we know that [tex]k = 213.194\,\frac{N}{m}[/tex], [tex]x = 0.10\,m[/tex], [tex]m = 0.60\,kg[/tex] and [tex]v_{max} = \pm 2.451\,\frac{m}{s}[/tex], then the velocity of the mass-spring system is:

[tex]\frac{k}{m} \cdot x^{2} + v^{2} = v_{max}^{2}[/tex]

[tex]v^{2} = v_{max}^{2}-\frac{k}{m}\cdot x^{2}[/tex]

[tex]v = \sqrt{v_{max}^{2}-\frac{k\cdot x^{2}}{m} }[/tex] (8)

[tex]v = \sqrt{\left(\pm 2.451\,\frac{m}{s} \right)^{2}-\frac{\left(213.194\,\frac{N}{m} \right)\cdot (0.10\,m)^{2}}{0.60\,kg} }[/tex]

[tex]v \approx \pm 1.567\,\frac{m}{s}[/tex]

The velocity when it is 0.10 meters from equilibrium is [tex]\pm 1.567[/tex] meters per second.

c) The total energy of the system ([tex]E[/tex]), measured in joules, can be determined by the following expression derived from the Principle of Energy Conservation:

[tex]E = \frac{1}{2}\cdot m\cdot v_{max}^{2}[/tex] (9)

If we know that [tex]m = 0.60\,kg[/tex] and [tex]v_{max} = \pm 2.451\,\frac{m}{s}[/tex], then the total energy of the system is:

[tex]E = \frac{1}{2}\cdot (0.60\,kg)\cdot \left(\pm 2.451\,\frac{m}{s}\right)^{2}[/tex]

[tex]E = 1.802\,J[/tex]

The total energy of the system is 1.802 joules.

d) Given that initial position of the mass-spring system is a maximum, then we conclude that the equation of motion has the following parameters: ([tex]A = 0.13\,m[/tex], [tex]\omega \approx 18.850\,\frac{rad}{s}[/tex] and [tex]\phi = 0.5\pi\,rad[/tex])

From (1) we obtain the resulting formula:

[tex]x(t) = 0.13\cdot \sin (18.850\cdot t +0.5\pi)[/tex] (10)

The equation describing the motion of the mass, assuming that initial position is a maximum is [tex]x(t) = 0.13\cdot \sin (18.850\cdot t +0.5\pi)[/tex].

Choose all correct sentences Group of answer choices The power is maximum when the value of the impedance is greater than the value of the resistance. Resonance occurs when omega squared space equals 1 divided by space L C At resonance, the power is maximum and the impedance is minimum. At resonance, R squared space equals space (X subscript L minus X subscript c )squared The impedance Z is always larger than the resistance R.

Answers

Answer:

True  b and c

Explanation:

In an RLC circuit the impedance is

         [tex]Z = \sqrt{[R^{2} + ( (wL)^{2} + (\frac{1}{wC})^{2} ] }[/tex]

examine the different phrases..

a) False. The maximum impedance is the value of the resistance  

b) True. Resonance occurs when  

              (wL)² + (1 / wC)² = 0

               w² = 1 / LC

c) True. In resonance the impedance is the resistive part and the power is maximum  

d) False. In resonance the inductive and capacitive part cancel each other out  

e) False. The impedance is always greater outside of resonance, but at the resonance point they are equal


vector of magnitude 15 is added to a vector of magnitude 25. The magnitude of this sum
might be:

A. Zero
B.5
C.9
0 15
E.4
and how ? ​

Answers

Explanation:

Given that,

Magnitude of vector A, |A| = 15

Magnitude of vector B, |B| = 25

We need to find the magnitude of this sum.

The maximum sum of the resultant vector,

[tex]R_{max}=|A_1|+|A_2|\\\\=15+25\\\\=45[/tex]

The minimum sum of the resultant vector,

[tex]R_{min}=|A_1|-|A_2|\\\\=15-25\\\\=-10[/tex]

So, the magnitude of this sum either 45 or -10.

A car of mass 1150 kg drives in a circle of radius 44 m. If the car has a speed of 13 m/s, what is the
centripetal force acting on the car?

Answers

Answer:

4417

i think because

mv^2/r is centripetal force

a passenger of mass m on a Ferris wheel moves in a vertical circle of radius r with constant speed v assuming that the seat remains upright during the motion which is true about the force the seat exerts on the passenger at the top of the circle

the upward force is equal in magnitude to the passenger's weight
the upward force is greater in magnitude than the passenger's weight
the upward force is smaller in magnitude than the passenger's weight
the upward force is zero

Answers

Answer:

the upward force is equal to the passenger weight

The answer that is the truth about the force that the seat exerts on the passenger is the upward force is equal in magnitude to the passenger's weight.

Why the upward force is equal in magnitude to weight

The acting forces on the body has been said to be vertical. This implies that the upward force and the downward force of gravity are the same.

Using the second law of Isaac Newton, the downward direction of the forces would be ascertained.

Read more on force and magnitude here:

https://brainly.com/question/19802988

types of magnetic resonance image​

Answers

Answer: ur mom

Explanation:

Other Questions
Silicon Valley in the San Francisco Bay Area is often called the tech center of the world. The region gets its name from the silicon used in computer chips that were widely manufactured there. Today, this region houses many of the largest computer hardware, software, internet, and digital communication companies in the world. Identify and explain two ways in which an earthquake in this area could affect people in other parts of the world. Dan, Richard and Nick share 70 in a ratio 1:3:1. How much money does each person get?Dan: Richard: Nick: Which of the following is not a grassland?A)VeldtsB)PlainsC)SteppesD)Llanos What equation is equal to 8-2x=12? A)2x-8=-12B)2x-8=12C)x-4=6D)2x=20 Why do amphibian eggs need to be produced in water?The eggs cannot be exposed to a lot sunlight.All amphibians are only found in water.The eggs cannot be exposed to wind.The eggs do not contain hard shell around it to prevent it from drying. Identify four of Jerusalem's holy sites. To which religion is each site sacred, and why is it considered important?Holy Sites of the Ancient City of JerusalemJerusalem is one of the oldest cities in the world. People settled there about 3,000 BCE. The area has been occupied ever since. Today, Jerusalem is located in Israel. The city is a holy place for people of three world religions. There are many sites in the city that are important to the faiths of Islam, Judaism, and Christianity.Temple Mount, the Dome of the Rock, and El Aqsa MosqueTemple Mounta large, walled, stone plaza on a hilltopis one of the most important spiritual sites in Jerusalem. It is called Al-Haram al-Sharf in Arabic, which is the language of Islams holy book called the Quran. Temple Mount is so large that hundreds of thousands of people can visit the site at the same time. This is important because Muslims (followers of Islam), Jews, and Christians all consider Temple Mount a holy place.Muslims believe that this site is the place where Muhammad, the prophet and founder of Islam, ascended to heaven. The oldest existing Islamic monument, the Dome of the Rock shrine, was built on Temple Mount. The shrine is called Qubbat al-akhrah in Arabic. It was completed in 692 CE. The Al-Aqsa Mosque is also located on Temple Mount. This place of Muslim worship is the largest mosque in Jerusalem. Al-Aqsa can accommodate more than 4,000 worshippers at once. Muslims consider the entirety of Temple Mount a mosque. It is their third most important spiritual site, after Mecca and Medina.The Dome of the Rock also marks an area important in the Jewish tradition. Jews believe that Abrahamthe patriarch of the Hebrewsprepared to sacrifice his son Isaac at the site.The First and Second Temples and the Western WallIn Hebrewthe language of the Jewish holy book, the TorahTemple Mount is called Har Ha-Bayit. To Jews, Temple Mount is the site of the First and Second Temples, Jewish places of worship in ancient Israel that were destroyed in conflicts. Parts of the walls that surround Temple Mount were built to support the Second Temple. The Western Wall, which is also called the Wailing Wall or the Kotel, is one of these walls. It is the most important Jewish spiritual site, and Jews worship here daily.To Christians, the Temple Mount is important because it played a central role in the life of Jesus Christ. He was a Jewish religious leader whom Christians consider the incarnation of God. Christians believe that Jesus prayed and taught at the Second Temple.The Church of the Holy SepulchreThe holiest site for Christians is the Church of the Holy Sepulchre in Jerusalem. Christians believe that at this site, Jesus Christ was crucified on a cross and buried in a nearby stone tomb. (The word sepulchre means tomb.) Three days later, they believe, he rose from the dead at this spot. The Church of the Holy Sepulchre contains more than 30 chapels and places of worship. The most important is the Tomb of Christ, also called the Edicule. Another is Golgotha, the rock where Jesus Christ was crucified, which was enclosed within the church sometime after his death. One impact of the invasions experienced by the Jews was _____________. Rick has a piece of lumber that is 12 feet long. He cuts it into pieces that are each 3/4 of a foot long. How many pieces of 3/4 foot lumber will he be able to make? Viruses are particles that Select one: a. contain DNA or RNA which can be injected into a cell. b. have an exterior coat composed of protein. c. can contain an enzyme which catalyzes the reaction to make DNA from the viral RNA. d. All of these answer choices are correct. How to write 10:40 in Spanish please i need this done in an hour Ill make you brainliest:Which shows the equation 12x + 4y = 480in general form? Find the distance across the bridge __________ is best defined as a societys way of life that includes its beliefs, customs, traditions, and values. A. Tolerance B. Diversity C. Culture D. Religion ? - What is125% of16?please help me im not good at math at all. $16 for 4 books. How much would 12 books cost? what is a hybrid tell me brainly if you do Order the set of integers from greatest to least. {8, 43, -25, 12, -14, 3} Most slide layouts include at least one ________ by default.Question 2 options:placeholderaction buttontransitionanimation