2) A balloon was inflated to a volume of 5.0 liters at a temperature of
7.0°C. It landed in an oven and was heated to 147°C. What is its new
volume?

Answer: D

Explanation:  Irregular galaxies

Answer:

Your answer is D

Explanation:

Irregular galaxies do not have a regular structure.

Answer:

see explanations

Explanation:

The graphic is the heating curve for water. Note that it is divided into 5 distinct heat flow segments. The segments with changing slopes are single phase segments with changes in temperature values. From left to right segment A is solid ice being warmed to it's melting point. Segment B is the melting segment in which 2 phases are in contact (solid + liquid). Note that addition of heat does not change the temperature. Segment C is warming of the liquid (single phase) up to its boiling point. At the boiling point the liquid begins to pass into the gas phase and again 2 phases are in contact; i.e., liquid & gas. Note again when two phases are in contact no temperature change occurs. Finally, segment E is the heating of the pure, single phase gas.

In summary ...

Segment A => heating single phase (solid) ice up to melting pt.

Segment B => melting of ice => 2 phases in contact (s & l) ΔT = ∅.

Segment C => heating single phase (liquid) water up to boiling pt.

Segment D => boiling of liquid => 2 phases in contact (l & g). ΔT = ∅.

Segment E => heating single phase (steam) up to desired temperature.

For what it's worth, the equation for the segments that show increasing temperature values is q = mcΔT (m= mass, c = specific heat & ΔT temp change.

The segments with zero slopes (horizontal lines) are defined by equations  q = m·ΔHₓ where m = mass & ΔHₓ = heat of fusion (a constant = 335 j/g). The same is true for the line at 100°C where q = m·ΔH(v) where m = mass & ΔH(v) is the heat of vaporization (a constant = 2259 j/g.

Calculations involve calculating the amount heat transfer for each segment individually and then adding the heat values to obtain the total heat transfer.

If you need more instruction on this topic, kick back a note and I'll try to help clarify. Good Luck, Doc :-)

Answer:

Picture attached has answers

Explanation:

Answer:

The color black absorbs most colors, while white reflects most colors.

Answer:

0.083 M

Explanation:

We'll begin by calculating the number of mole in 0.43 g of KHP (potassium hydrogen phthalate, C₈H₅O₄K). This is can be obtained as follow:

Mass of C₈H₅O₄K = 0.43 g

Molar mass of C₈H₅O₄K = (8×12) + (5×1) + (16× 4) + 39

= 96 + 5 + 64 + 39 = 204 g/mol

Mole of C₈H₅O₄K =?

Mole = mass / molar mass

Mole of C₈H₅O₄K = 0.43 / 204

Mole of C₈H₅O₄K = 0.002 mole

Next, we shall determine the number of mole of NaOH required to react with 0.43 g (i.e 0.002 mole) of KHP. This can be obtained as follow:

C₈H₅O₄K + NaOH → C₈H₄O₄KNa + H₂O

From the balanced equation above,

1 mole of KHP reacted with 1 mole of NaOH.

Therefore, 0.002 mole of KHP will also react with 0.002 mole of NaOH.

Next, we shall convert 24.11 cm³ to L. This can be obtained as follow:

1000 cm³ = 1 L

Therefore,

24.11 cm³ = 24.11 cm³ × 1 L / 1000 cm³

24.11 cm³ = 0.02411 L

Finally, we shall determine the molarity of NaOH. This can be obtained as follow:

Mole of NaOH = 0.00 2 mole

Volume = 0.02411 L

Molarity of NaOH =?

Molarity = mole /Volume

Molarity of NaOH = 0.002 / 0.02411

Molarity of NaOH = 0.083 M

Answer:

A five-sided polygon.- cyclopentane

A square.- cyclobutane

A five-sided polygon with one line extending from a point.- methylcyclopentane

A 6-sided polygon with a line extending from one point to a C H 3.- methlcyclohexane

Explanation:

The correct options are :

Cycloalkane is a cyclic hydrocarbon meaning that the carbon of the molecules is arranged in the form of a ring. These are also saturated and all of the carbon stems make up a ring.

These are monocyclic and made from hydrogen and carbon. One ring structure is named after cyclo. Cyclobutane is columns gases and is available in liquefied gas.

Find out more information about the cycloalkanes.

brainly.com/question/10189586

Answer:

0.448 mols

Explanation:

Use balanced equation:

2H2 + O2 -> 2H2O

For every one mole of oxygen, there are two moles of water

hence the molar ratio 1:2

So if there are 0.224 mols of oxygen

Water = 0.224×2

Which is 0.448 mols of H20

Answer:

133.34 g/moles

Explanation:

but to make life easy it could be 133.4 g/ moles as well

Answer:   First we need to know how many moles of each reactant there are.

C6H12O6 :         25g/180.06g/mol=0.1388mol

O2:                    40g/32g/mol=1.25mol

The equation tells us we need 6 moles of O2 for every 1 mole of Glucose.

6 x 0.1388 = 0.8328

So, we have more O2 then needed – it is in excess.

Glucose is the limiting reagent – we use this for the calculation.

The equation tells us we make 6 moles of CO2 for every 1 mole of Glucose

So, we make 0,8328 moles of Carbon Dioxide

Explanation:

Answer:

18.18C

Explanation: Write whats below to show your work :D

m=55

C=0.45

Q=450zj

ch.temp=?

Q=mct

450 = (55)(.45)T

450 = 24.75

/24.75 = /24.75 (cancels out)

18.18 is the answer

Hope this helps! did it with my teacher.

Answer:

thank u

Explanation:

Answer:

Wind

Explanation:

Wind turbines make energy by the movement of the natural force on earth called 'wind' and renewable resources are resources that can be made from natural and environment-safe objects or things (e.g. Water, Geothermal Heat, The Sun, and Wind)

Answer:

[tex]\color{Blue}\huge\boxed{Answer} [/tex]

B.the electrons become delocalized and form a "sea"

Answer:

See attached picture.

Explanation:

Hello there!

In this case, according to the given information, it is possible to complete the table by knowing that the atomic number is the same to the number of protons equals those of electrons and that the neutrons are calculated by subtracting the atomic mass and the protons; thus, we are able to obtain the result as shown on the attached picture.

Best regards!

Answer:

Explanation:

450 grams of Na2SO4? 450 Na soullnol Na2SO4 16.02x1023 molec, Na₂SO4 = 119x1024. | 142.05g Na25041 Imol Naz

Answer: a. A solid melts: [tex]\Delta S=+ve[/tex]

b. a vapor is converted to solid: [tex]\Delta S=-ve[/tex]

c. a liquid freezes:  [tex]\Delta S=-ve[/tex]

d. A solid sublimes:  [tex]\Delta S=+ve[/tex]

e.  a vapor condenses to liquid :  [tex]\Delta S=-ve[/tex]

f. a liquid boils:   [tex]\Delta S=+ve[/tex]

g. dissolving a tablespoon of salt in water:  [tex]\Delta S=+ve[/tex]

h. combustion of gasoline:  [tex]\Delta S=+ve[/tex]

Explanation:

Entropy is the measure of randomness or disorder of a system. If a system moves from  an ordered arrangement to a disordered arrangement, the entropy change is negative and vice versa.

a. A solid melts: The solid is converting to liquid, thus the randomness is increasing as the molecules are moving away and the intermolecular forces are getting weaker. Thus the entropy change [tex](\Delta S)[/tex] is positive.

b. a vapor is converted to solid: The gas  is converting to solid, thus the randomness is decreasing as the molecules are moving close and the intermolecular forces are getting stronger Thus the entropy change [tex](\Delta S)[/tex] is negative.

c. a liquid freezes: The liquid is converting to solid, thus the randomness is decreasing as the molecules are moving close and the intermolecular forces are getting stronger. Thus the entropy change [tex](\Delta S)[/tex] is negative.

d. A solid sublimes: The solid is converting to gas, thus the randomness is increasing as the molecules are moving away and the intermolecular forces are getting weaker. Thus the entropy change [tex](\Delta S)[/tex] is positive.

e.  a vapor condenses to liquid : The gas  is converting to liquid, thus the randomness is decreasing as the molecules are moving close and the intermolecular forces are getting stronger. Thus the entropy change [tex](\Delta S)[/tex] is negative.

f. a liquid boils: The liquid is converting to gas, thus the randomness is increasing as the molecules are moving away and the intermolecular forces are getting weaker. Thus the entropy change [tex](\Delta S)[/tex] is positive.

g. dissolving a tablespoon of salt in water: The solid is converting to ions , thus the randomness is increasing as the ions can move freely. Thus the entropy change [tex](\Delta S)[/tex] is positive.

h. combustion of gasoline: The liquid is converting to gas, thus the randomness is increasing as the molecules are moving away and the intermolecular forces are getting weaker. Thus the entropy change [tex](\Delta S)[/tex] is positive.

Answer:

a. pH = 2.04

b. pH = 3.85

c. pH = 8.06

d. pH = 11.56

Explanation:

The nitrous acid is a weak acid (Ka = 5.6x10⁻⁴) that reacts with NaOH as follows:

HNO₂ + NaOH → NaNO₂(aq) + H₂O(l)

a. At the beginning there is just a solution of 0.12M HNO₂. As Ka is:

Ka = [H⁺] [NO₂⁻] / [HNO₂]

Where [H⁺] and [NO₂⁻] ions comes from the same equilibrium ([H⁺] = [NO₂⁻] = X):

5.6x10⁻⁴ = X² / 0.15M

8.4x10⁻⁵ = X²

X = [H⁺] = 9.165x10⁻³M

As pH = -log [H⁺]

b. At this point we have HNO₂ and NaNO₂ (The weak acid and the conjugate base), a buffer. The pH of a buffer is obtained using H-H equation:

pH = pKa + log [NaNO₂] / [HNO₂]

Where pH is the pH of the buffer,

pKa is -log Ka = 3.25

And [NaNO₂] [HNO₂] could be taken as the moles of each compound.

The initial moles of HNO₂ are:

0.100L * (0.15mol / L) = 0.015moles

The moles of base added are:

0.0800L * (0.15mol / L) = 0.012moles

The moles of base added = Moles of NaNO₂ produced = 0.012moles.

And the moles of HNO₂ that remains are:

0.015moles - 0.012moles = 0.003moles

Replacing in H-H equation:

pH = 3.25 + log [0.012moles] / [0.003moles]

c. At equivalence point all HNO2 reacts producing NaNO₂. The volume added of NaOH must be 100mL. That means the concentration of the NaNO₂ is:

0.15M / 2 = 0.075M

The NaNO₂ is in equilibrium with water as follows:

NaNO₂(aq) + H₂O(l) ⇄ HNO₂(aq) + OH⁻(aq) + Na⁺

The equilibrium constant, kb, is:

Kb = Kw/Ka = 1x10⁻¹⁴ / 5.6x10⁻⁴ = 1.79x10⁻¹¹ = [OH⁻] [HNO₂] / [NaNO₂]

Where [OH⁻] = [HNO₂] = x

[NaNO₂] = 0.075M

1.79x10⁻¹¹ = [X] [X] / [0.075M]

1.34x10⁻¹² = X²

X = 1.16x10⁻⁶M = [OH⁻]

pOH = -log [OH-] = 5.94

pH = 14-pOH

d. At this point, 5mL of NaOH are added in excess, the moles are:

5mL = 5x10⁻³L * (0.15mol / L) =7.5x10⁻⁴moles NaOH

In 100mL + 105mL = 205mL = 0.205L. [NaOH] = 7.5x10⁻⁴moles NaOH / 0.205L =

3.66x10⁻³M = [OH⁻]

pOH = 2.44

pH = 14 - pOH

Answer:

c balance

Explanation:

if you weigh something, you prove it's there.

Answer:

A.The sound becomes louder.

And

C.The sound waves get further.

Explanation:

Louder the sound it will travel long.

Explanation:

2,4-DNP is negative: aldehyde and ketone absent

Chromic acid is negative: alcohol absent.

KMnO4 test negative: alkene absent

The only positive result is for Fe(OH)2.

Nitro group-containing compounds react with ferrous hydroxide to give amine and ferric hydroxide red ppt. Hence given compound contains the nitro group (-NO2).

Answer:

B. The cells.

call

Cells are considered the basic units of life in part because they come in discrete and easily recognizable packages. That's because all cells are surrounded by a structure called the cell membrane — which, much like the walls of a house, serves as a clear boundary between the cell's internal and external environments.

Answer:

2.1 M

Explanation:

The dilution equation is [tex]M_{s} V_{s} = M_{d} V_{d}[/tex].

[tex]M_{s}[/tex] = the molarity of the sock solution

[tex]V_{s}[/tex] = the volume of the sock solution

[tex]M_{d}[/tex] = the molarity of the diluted solution

[tex]V_{d}[/tex] = the volume of the diluted solution

The stock solution would be what is doing the diluting, so "175 mL of a 3.00 M solution". So [tex]M_{s}[/tex] = 3.00 M. Then: Converting 175 mL to liters: [tex]175 mL * \frac{1 L}{1000mL} = 0.175 L[/tex] (This is [tex]V_{s}[/tex])

And converting 250 mL KCl to liters: [tex]250 mL * \frac{1 L}{1000mL} = 0.250 L[/tex] (This will be [tex]V_{d}[/tex])

Then, we plug in our given into the dilution equation, resulting in:

[tex]3.00 M * 0.175 L = M_{d} * 0.250 L[/tex] (divide both sides by 0.250 L, in order to get [tex]M_{d}[/tex] by itself)

[tex]\frac{3.00 M * 0.175 L}{0.250 L} = M_{d}[/tex]

[tex]M_{d} = 2.1 M[/tex]

So, the molarity of 250 mL KCl made by diluting 175 mL of a 3.0 M solution would be 2.1 M (mol/L).

Hopefully this helped you understand the topic a little bit better. I just finished molarity and dilutions in Chemistry last week. Good luck!

Answer:

A decrease in temperature decreases the number of collisions between molecules . The reaction rate will  decrease

Explanation:

Answer:

1665

Explanation:

In 1665, Robert Hooke was the first to observe cork cells and their characteristic hexagonal shape, using the first optical microscope, which was invented by him at that time.

Answer:

C

Explanation:

Check it. So u can know it

E⁣⁣⁣xplanation i⁣⁣⁣s i⁣⁣⁣n a f⁣⁣⁣ile

bit.[tex]^{}[/tex]ly/3a8Nt8n

Answer:

Explanation:

Assumptions

Note

The concentrations would merely add. All things change if the assumptions I've made are not true.