Answer:
.084 M
Explanation:
Molar mass of sucrose = 342.3
The formula to find molarity is moles of solute / liters of solution
Since we need to turn grams to moles for this equation we do 104 / 342.3 = 0.304
Now we can use the equation listed above. .304 / 3.6 = 0.084 M
What does a negative AHf for a molecule mean?
A. Energy was added when the molecule changed phases.
B. Energy was added when the molecule was formed from its
elements.
C. Energy was released when the molecule was formed from its
elements.
O D. Energy was released when the molecule went through a phase
change.
SUBMIT
Option D I got it right
ANSWER: C (ENERGY WAS RELEASED WHEN THE MOLECULE WAS FORMED FROM ITS ELEMENTS.)
HOPE THE OTHER PERSON IS WRONG!
Balance the following chemical equation by providing the correct coefficients:
[ ]N2 + [ ]H2 -> [ ]NH3
Nitrogen + hydrogen produces ammonia (NH3)
Answer:
1 N2 + 3 H2 --> 2 NH3 :))) !!
which is BEST used to describe a chemical reaction that also produces a change in heat?
a. exothermic reaction
b. chemical reaction
c. thermochemical reaction
d. nuclear reaction
will give brainliest
Answer:
I think it's thermochemical reaction and sorry if it's wrong
When a stalactite is formed by water leaving mineral deposits from the ceiling of a cave, this is caused by_____
A:Erosion
B: deposition
Answer:
it is b
Explanation: As the carbon dioxide is released, calcite is precipitated or redeposited on cave walls, ceilings and floors. As the redeposited minerals build up after countless water drops, a stalactite is formed.
If a sulfur atom gained 3 protons what atom would be formed?
Answer:
The stable ion the sulfur would form is the sulfide ion,
Explanation:
When any atom accept electrons it converts into negative ion/an anion. So it will change into Z 3− after gaining 3 electrons.
Sulfur is an elemental atom that has an atomic number of 16 and an atomic mass of 32.065 amu. If the sulfur atom gains three protons then potassium will be formed.
What is a proton?A proton has been a sub-atomic particle that has been known to carry a positive charge and are tend to remain inside the nucleus with the neutrons bonded together by the nuclear force.
The proton of the atom is the characteristic property of the element in the periodic table. They are the sole sub-atomic particle that gives the atomic number of the elemental atom.
The sulfur atom has the atomic number 16 which means it has 16 protons, so if three protons are added to it then the number f protons become 19 which is an atomic number of the potassium (K) element.
Therefore, a potassium element is formed.
Learn more about protons, here:
https://brainly.com/question/24508299
#SPJ2
The air pressure inside a balloon is 0.783 atm. What is this pressure in mmHg?
Do not include units in your answer.
Answer:
It is the same it does not change
Explanation:
Which of the following statements explains which trial has a lower concentration of the reactant? (5 points) Trial 1, because the average rate of the reaction is lower. Trial 1, because this reaction lasted for a longer duration than Trial 2. Trial 2, because this reaction was initially fast and later slowed down. Trial 2, because the v
Answer:
A)Trial 1 because the average rate of reaction is lower.
Explanation:
I accidentally gave myself low rating my bad
The statement that best explain which trial has a lower concentration of the reactants is Trial 1, because this reaction lasted for a longer duration than Trial 2.
What is a Chemical reaction?Chemical reaction refers to reaction that take place between reacting substances in which the chemical substances are transformed to products.
When the concentration of the reactants increases, more molecules tend to interact with each other in order to form new compounds, and the rate of reaction increases. When the concentration of the reactants reduces, there are little of that molecule present, and the rate of reaction decreases
Therefore, The statement that best explain which trial has a lower concentration of the reactants is Trial 1, because this reaction lasted for a longer duration than Trial 2.
Learn more about chemical reaction below.
https://brainly.com/question/16416932
what are two places that producers can get energy?
Answer:
The Food Chain: The answer has to do with trophic levels. As you probably know, the organisms at the base of the food chain are photosynthetic; plants on land and phytoplankton (algae) in the oceans. These organisms are called the producers, and they get their energy directly from sunlight and inorganic nutrients.
Explanation:
Brainliest?
What type of product is formed when acids are added to some ionic compounds
Answer:
salt
Explanation:
When acid and base solutions react, they produce water and a neutral ionic compound called a salt.
What does Aluminum and Magnesium oxide create
Answer: MgAl2O4 or Spinel (gemstone)
Explanation:
Why does water float on corn syrup
Answer:
density.
Explanation:
A cubic centimeter of water weighs 1 gram. Since a cubic centimeter of vegetable oil weighs less than 1 gram, oil will float on water. Corn syrup is more dense than water so 1 cubic centimeter of corn syrup weighs more than 1 gram. Therefore, corn syrup sinks in water.
Answer:
Click on the photo to see the full attachment
can any one solve this quiz plz
Answer:
1. It is stoichiometric.
2. O2 is the limiting reactant.
3. 9.0 g of C2H6 remain unreacted.
4. 17.6 g of CO2.
5. 85.2%.
Explanation:
Hello there!
In this case, for the given chemical reaction:
[tex]2C_2H_6+7O_2\rightarrow 4CO_2+6H_2O[/tex]
We can see that:
1. It is stoichiometric and is balanced because the reactants yields the products according to the law of conservation of mass.
2. In this part, it is possible to calculate the moles of ethane by using its molar mass:
[tex]n_{C_2H_6}=15g*\frac{1molC_2H_6}{30.08g} =0.50molC_2H_6[/tex]
And the moles of oxygen by knowing that one mole is contained in 22.4 L at STP:
[tex]n_{O_2}=\frac{1mol}{22.4L} *15.68L=0.7molO_2[/tex]
Thus, by calculating the moles of carbon dioxide product by each reactant, we can identify the limiting one:
[tex]n_{CO_2}^{by\ C_2H_6}=0.50molC_2H_6*\frac{4molCO_2}{2molC_2H_6} =1.0molCO_2\\\\n_{CO_2}^{by\ O_2}=0.70molO_2*\frac{4molCO_2}{7molO_2} =0.4molCO_2\\[/tex]
Thus, since oxygen yields the fewest moles of CO2 product, we infer it is the limiting reactant.
3. In this part, we calculate the mass of C2H6 that actually react first:
[tex]m_{C_2H_6}^{reacted}=0.4molCO_2*\frac{2molC_2H_6}{4molCO_2}*\frac{30.08gC_2H_6}{1molC_2H_6} =6.0gC_2H_6[/tex]
Thus, the leftover of ethane (C2H6) as the excess reactant is:
[tex]m_{C_2H_6 }^{leftover}=15g-6.0g=9.0g6.0C_2H_6[/tex]
4. Since 0.4 moles of carbon dioxide were produced, we use its molar mass to calculate the mass as its theoretical yield:
[tex]m_{O_2}^{theoretical}=0.4molCO_2*\frac{44gCO_2}{1molCO_2}=17.6gCO_2[/tex]
5. Finally, the percent yield is gotten by dividing the actual yield by the theoretical one:
[tex]Y=\frac{15g}{17.6}*100\%\\\\Y=85.2\%[/tex]
Best regards!
HELP!
NaCl is made from 1 Na and 1 Cl. If I have 45.978 grams of Na, how many grams of NaCl can I make? (You will have to convert to moles of Na first!)
explain answer
Answer:
116.88 g
Explanation:
Step 1: Write the balanced equation for the synthesis of NaCl
Na + 1/2 Cl₂ ⇒ NaCl
Step 2: Calculate the moles corresponding to 45.978 g of Na
The molar mass of Na is 22.990 g/mol.
45.978 g × 1 mol/22.990 g = 1.9999 mol
Step 3: Calculate the number of moles of NaCl formed from 1.9999 moles of Na
The molar ratio of Na to NaCl is 1:1. The moles of NaCl formed are 1/1 × 1.9999 mol = 1.9999 mol.
Step 4: Calculate the mass corresponding to 1.9999 moles of NaCl
The molar mass of NaCl is 58.443 g/mol.
1.9999 mol × 58.443 g/mol = 116.88 g
How many grams of water, H 2 O , is given o when 62.1 g of propane, C 3 H 8 , burns?
Answer:
101.62 grams of water is given o when 62.1 g of propane burns.
Explanation:
Propane gas (C₃H₈) burns with oxygen gas and products carbon dioxide gas and liquid water. The balanced reaction is:
C₃H₈ + 5 O₂ → 3 CO₂ + 4 H₂O
By stoichiometry, the following amounts of moles of each compound participate in the reaction:
C₃H₈: 1 mole O₂: 5 moles CO₂: 3 moles H₂O: 4 molesBeing the molar mass of each compound:
C₃H₈: 44 g/mole O₂: 32 g/moleCO₂: 44 g/moleH₂O: 18 g/moleBy stoichiometry, the following mass quantities of each compound participate in the reaction:
C₃H₈: 1 mole* 44 g/mole= 44 grams O₂: 5 moles* 32 g/mole= 160 gramsCO₂: 3 moles* 44 g/mole= 132 gramsH₂O: 4 moles* 18 g/mole= 72 gramsThen you can apply the following rule of three: if by stoichiometry 44 grams of propane produces 72 grams of water, 62.1 grams of propane how much mass of water does it produce?
[tex]mass of water=\frac{62.1 grams of propane*72 grams of water}{44 grams of propane}[/tex]
mass of water= 101.62 grams
101.62 grams of water is given o when 62.1 g of propane burns.
Calculate the equilibrium constant of the reaction below if the pressures are 1.0atm, 2.0 atm, and 1.0 atm respectively. PCl3 + Cl2 <--> PCl5
Answer:
K = 0.5
Explanation:
Based on the reaction:
PCl₃ + Cl₂ ⇄ PCl₅
The equilibrium constant, K, is defined as:
K = P PCl₅ / P PCl₃ * P Cl₂
Where P represent the pressure at the equilibrium for each one of the gases involved in the equilibrium.
As:
P PCl₅ = 1.0atm
P PCl₃ = 1.0atm
P Cl₂ = 2.0atm
K = 1.0atm / 1.0atm * 2.0atm
K = 0.5Using dimensional analysis, convert 523.7 cm into feet. (1 in= 2.54 cm; 12 in=1 ft)
-15962
-2471
-17.18
-43.64
Answer:
17.18
Explanation:
(1 in = 2.54 cm; 12 in = 1 ft)
Formula:- Divide the length value by 30.48
523.7 ÷ 30.48 = 17.181
Thus, The answer is 17.181
-TheUnknownScientist
Answer:
17.18
Explanation:
I hope its helpful......
HELPP asap I’ll mark you as brainlister
Answer: the answer is D the last one.
Explanation:
hope this helps! have a good day! :) ^-^
A nuclear power plant is used to generate:
steam
solar energy
heat energy
electricity
Answer:
Anuclear power plant is used to generate electricity
Answer:
Anuclear power plant is used to generate electricity
thank me later
Explanation:
PLEASE HELP
Find the kinetic energy of the horse using KE=1/2mv^2.
Answer:
78878
Explanation:
Xavier was conducting a long term study of two populations of butterflies. Both populations had the same number of individuals. Both populations lived in forests that were the same size. Population A lived in a forest that was full of milkweed, the favorite food of this butterfly species. Population B lived in a forest that had limited amounts of milkweed and other foods. Over many years, Xavier found that one of the populations was showing signs of evolutionary change. Their mouth parts were changing and they could get food from new kinds of plants. Which statement explains why one population would be more likely to evolve in response to natural selection? *
a. Population B would be more likely to change because it has a ready supply of food, and only certain butterflies would be able to survive
b. Population A would be more likely to change because it has a ready supply of food and only certain butterflies would be able to survive
c. Population A would be more likely to change because it has a limited amount of food and some butterflies might be better able to get enough food, survive, and reproduce
d. Population B would be more likely to change because those butterflies have a limited supply of food, and butterflies with certain traits might be better able to get enough food, survive, and reproduce.
Based on information from the periodic table, what does this image represent?
A. A neutral fluorine atom
B. A negatively charged fluoride atom
C. A positively charged fluoride ion
D. A neutral neon atom
Based on the information given, the image represents a negatively charged fluoride atom (Option B)
Composition of atomAn atom is composed of a centrally placed nucleus (containing protons and neutrons) and a cloud of electrons revolving round it.
How to determine the chargeFrom the question given above, the following data were obtained:
Proton = 9Neutron = 10Electron = 10Charge =?Charge = Proton – Electron
Charge = 9 – 10
Charge = –1
Note
Element with proton number of 9 is fluorine
Thus, we can conclude that the image represents a negatively charged fluoride ion (Option B)
Learn more about composition of atoms:
https://brainly.com/question/886387
Answer:
B
Explanation:
Can someone answer this pls
Answer:12
Explanation:
A gas system has an initial number of moles of 0.693 moles with the volume unknown. When the number of moles changes to 0.928 moles volume is found to be 7.98 L. What was the initial volume in mL?
Answer:
The initial volume in mL is 5959.2 mL
Explanation:
As the number of moles of a gas increases, the volume also increases. Hence, number of moles and volumes are directly proportional i.e
n ∝ V
Where n is the number of moles and V is the volume
Then, n = cV
c is the proportionality constant
∴n/V = c
Hence n₁/V₁ = n₂/V₂
Where n₁ is the initial number of moles
V₁ is the initial volume
n₂ is the final number of moles
and V₂ is the final volume.
From the question,
n₁ = 0.693 moles
V₁ = ?
n₂ = 0.928 moles
V₂ = 7.98 L
Putting the values into the equation
n₁/V₁ = n₂/V₂
0.693 / V₁ = 0.928 / 7.98
Cross multiply
∴ 0.928V₁ = 0.693 × 7.98
0.928V₁ = 5.53014
V₁ = 5.53014/0.928
V₁ = 5.9592 L
To convert to mL, multiply by 1000
∴ V₁ = 5.9592 × 1000 mL
V₁ = 5959.2 mL
Hence, the initial volume in mL is 5959.2 mL
Is a animal searching for water a stimulus or response
Answer:
response I believe
Explanation:
i'm pretty sure it's a response cause it's the animal responding to needing water and being thirsty
hope this helps! :)
Please help me with this homework
The heat of vaporization of a liquid is 84.0 J/g. How many joules of heat would it take to completely vaporize 172 g of this liquid at its boiling point?
Answer:
14,448 J of heat would it take to completely vaporize 172 g of this liquid at its boiling point.
Explanation:
The heat Q that is necessary to provide for a mass m of a certain substance to change phase is equal to Q = m*L, where L is called the latent heat of the substance and depends on the type of phase change.
During the evaporation process, a substance goes from a liquid to a gaseous state and needs to absorb a certain amount of heat from its immediate surroundings, which results in its cooling. The heat absorbed is called the heat of vaporization.
So, it is called "heat of vaporization", the energy required to change 1 gram of substance from a liquid state to a gaseous state at the boiling point.
In this case, being:
Q=?m= 172 gL= 84 [tex]\frac{J}{g}[/tex]and replacing in the expression Q = m*L you get:
Q=172 g*84 [tex]\frac{J}{g}[/tex]
Q=14,448 J
14,448 J of heat would it take to completely vaporize 172 g of this liquid at its boiling point.
Which solute, an electrolyte or a nonelectrolyte, has the greater effect on the boiling point when a given amount of each
solute is dissolved in the same mass of water?
O The nonelectrolyte does because it disperses into molecules.
O The electrolyte does because it disperses into molecules.
O The nonelectrolyte does because it dissociates into ions.
O The electrolyte does because it dissociates into ions.
The solute wether electrolyte or a nonelectrolyte, has the greater effect on the boiling point when a given amount of each solute is dissolved in the same mass of water The nonelectrolyte does because it dissociates into ions.
What is a solute?Solute refers to substances or liquid which can readily dissolve in a solvent. It's concentration is lower to that of solvent.
Therefore, The solute wether electrolyte or a nonelectrolyte, has the greater effect on the boiling point when a given amount of each solute is dissolved in the same mass of water The nonelectrolyte does because it dissociates into ions
Learn more about solute below.
https://brainly.com/question/16083884
#SPJ2
Answer:
D: The electrolyte does because it dissociates into ions.
Explanation:
What is the molarity of 42.1 g of AgNO3 dissolved in 1.75 L of solution?
2.31 M
B 0.248 M
C 0.142 M
D 24.1 M
When the wave passes through the medium
Answer: hewo, there! your answer is Below
A single disturbance passing through a medium is called a pulse.
Explanation:
When the disturbances are repeated in a periodic manner, the pulses generate a continuous wave. Longitudinal waves (also called compression waves – a slinky pushed and pulled) – moves parallel (same direction) to the wave motion.
Hope this helps !!
Have a amazing day !!!!
Answer:
When the energy of a wave passes through the medium, particles of the medium move. The more energy the wave has, the farther the particles of the medium move. The distance the particles move is measured by the wave's amplitude.
Explanation:
A single disturbance passing through a medium is called a pulse. When the disturbances are repeated in a periodic manner, the pulses generate a continuous wave. Longitudinal waves (also called compression waves – a slinky pushed and pulled) – moves parallel (same direction) to the wave motion.
Does this platform really work?
Answer:
Yes, it does, it helps very much :))
Explanation: