Answer:
Accelerating
Explanation:
Hope you get a good grade.
PLS help its not that hard but I don't understand it. Its science not chemistry but they don't have science.
In this activity, you will construct two solar ovens and use thermometers to determine which oven gets the hottest. What engineering problem are you trying to solve?
Answer:
Conservation of resources. Saving energy and helping reduce carbon emission.
Explanation:
8)
The animals in the food web release
into the environment, which plants then use for
A)
oxygen respiration
B)
carbon dioxide respiration
water vapor photosynthesis
D)
carbon dioxide photosynthesis
Answer:
Carbon dioxide photosynthesis
Explanation:
During photosynthesis, plants take in carbon dioxide (CO2) and water (H2O) from the air and soil.
hope it helps
help a girl out please :)
Answer:
94.4mg is the answer.
Explanation:
mass of gold = 0.175g = 175mg
no. of moles = given mass / relative atomic mass
n = 175/197
n = 0.888 mol.
From the equation, mole ratio of Gold to Chlorine is 2:3
moles of chlorine = 1.5 × 0.888 = 1.33
no. of moles (chlorine) = mass/(35.5 × 2)
1.33 = m/71
m = 94.4mg
∴ mass of chlorine = 94.4mg
How many moles are in 100 grams of gold?
Answer:
0.01 mole
Explanation:
Which of the following claims about a binary compound in which the bonding is ionic is most likely to be scientifically valid?
A) Both elements in the compound are metals.
B) The atomic masses of the elements in the compound are relatively small.
C) There is equal sharing of electrons between the atoms of the elements in the compound.
D) The electronegativity difference between the elements in the compound is relatively large.
Answer:
There is ionic bonding between Mg2+ ions and NO3− ions. Which of the following claims about a binary compound in which the bonding is ionic is most likely to be scientifically valid? Both elements in the compound are metals.
Answer:
The answer is D.
Explanation:
A: not correct: one element is a metal and the other is a non-metal.
B: not correct: Fr could be combined with Cl
C: not correct: They are transferred not shared.
D: correct: Non-metals have a higher electronegativity in comparison to the metals with a low electronegativity which results in a great change in electronegativity.
Joel is studying a certain organ system of the human body. It interacts with the respiratory system to transport oxygen and carbon dioxide gases between the lungs and different parts of the body. It interacts with the digestive system to transport nutrients throughout the body, and it interacts with the urinary system to remove wastes from the body.
What is Joel studying?
A. the nervous system
B. the circulatory system
C. the skeletal system
D. the muscular system
Which types of wave are used to support the theory that galaxies are expanding
Visible Spectrum
Explanation:
which uses red shift to indicate objects making away while the blue shift indicates objects moving down.
A sample of a compound is added to distilled water in a clean beaker. A reaction occurs
and the water temperature drops rapidly. Which of the following statments best supports this
observation?
A. An endothermic reaction occurred
B. The water was originally warmer than the compound
C. An exothermic reaction occurred
D. The beaker was contaminated by another compound
Answer: An endothermic reaction occurred
Explanation:
A sample of a compound is added to distilled water in a clean beaker. A reaction occurs and the water temperature drops rapidly which indicates that an endothermic reaction occurred. Hence, option A is correct.
What is an endothermic reaction?Endothermic reactions are chemical reactions in which the reactants absorb heat energy from the surroundings to form products.
An endothermic reaction means that heat is absorbed during this reaction (enthalpy change value has a positive sign).
During the endothermic reaction heat is absorbed from the surroundings (here, water) and hence the temperature of the water in which the reaction is taking place decreases.
Hence, option A is correct.
Learn more about endothermic reaction here:
https://brainly.com/question/8430533
#SPJ2
When [H+] = 3.33 x 10-7 what is the ph?
Answer:
6.48Explanation:
The pH of a solution can be found by using the formula
[tex]pH = - log ([ {H}^{+} ])[/tex]
From the question we have
[tex]pH = - log(3.33 \times {10}^{ - 7} ) \\ = 6.477555...[/tex]
We have the final answer as
6.48Hope this helps you
What is an example of a biotic factor in an environment?
Answer:
A biotic factor is a living organism that shapes its environment. In a freshwater ecosystem, examples might include aquatic plants, fish, amphibians, and algae. Biotic and abiotic factors work together to create a unique ecosystem.
Answer:
A FWOGGY!
Explanation:
hey mid! how ya doin?
What is the empirical
formula for a compound that is 69.8% Fe
and 30.2% 0?
Answer:
Fe2O3
Explanation:
How can you tell when a solid substance dissolves in water and does not
react?
A. Gas bubbles form in the water.
B. The substance starts to fizz in the water and gives off an odor.
O C. When the water evaporates, the substance is left behind.
O D. The water changes color and grows warm.
Explanation:
when the water evaporates the substance is left behind
A gas has a volume of 0.60L at 161K. Once heated, the same gas now has a volume of 14.1L at 279K and 2.44atm. What was the original pressure of the gas?
Answer:
31.08 atm.
Explanation:
From the question given above, the following data were obtained:
Initial volume (V₁) = 0.60 L
Initial temperature (T₁) = 161 K
Final volume (V₂) = 14.1 L
Final temperature (T₂) = 297 K
Final pressure (P₂) = 2.44 atm
Initial pressure (P₁) =?
The initial pressure of the gas can be obtained as follow:
P₁V₁/T₁ = P₂V₂/T₂
P₁ × 0.6 / 161 = 2.44 × 14.1 / 297
P₁ × 0.6 / 161 = 34.404 / 297
Cross multiply
P₁ × 0.6 × 297 = 161 × 34.404
P₁ × 178.2 = 5539.044
Divide both side by 178.2
P₁ = 5539.044 / 178.2
P₁ = 31.08 atm
Thus, the initial pressure of the gas was 31.08 atm.
Is hydrogen the only non-metal positive ion?
Answer:
Why hydrogen is the only non-metal elements which loses electron to form positive ions ? ... When hydrogen bonded with most electronegative element then it forms a positive ions but when it bonded with less electronegative element then it forms a negative ion.
A liquid changes color as it cools and becomes solid. How can you confirm
the type of change that took place?
A. Determining that the mass of the solid and liquid are different
would confirm that a chemical change took place.
B. Identifying the solid and liquid as the same substance would
confirm that a physical change took place.
O c. The color change and the formation of a solid confirm that a
chemical change took place.
D. The formation of a solid from a liquid confirms that a physical
change took place.
Answer: Hello, There! your answer is Below.
D. The formation of a solid from a liquid confirms that a physical
change took place.
Explanation:
The change from the liquid state to the solid state is called freezing. As the liquid cools, it loses thermal energy. As a result, its particles slow down and come closer together. Attractive forces begin to trap particles, and the crystals of a solid begin to form.
Hope this helps you!!!
Have a great day!!!
When a liquid undergoes solidification and change of phase it is called freezing. The physical change can be confirmed by changes in the state of matter from liquid to solid. Thus, option D is correct.
What are physical changes?Physical changes are the modification in the matter or object that can be reversed back to its original state. They do not produce substances that are irreversible.
The change of the phase of the matter from liquid to solid when water substance undergoes freezing is a physical change as no new compound is created and the solidified substance can get converted back to liquid.
Therefore, option D. solid from liquid shows a physical change.
Learn more about physical change here:
https://brainly.com/question/17931044
#SPJ2
Suppose that a sample of gas occupies 187 mL
of volume at 298 K and a pressure of 277 torr.
What would be the volume (expressed of
this sample) if the pressure were changed to
571 torr at 298 K?
Answer in units of mL.
Answer:
V2 = 90.7 mL
Explanation:
pressure and volume are inversely proportional, if the pressure is increased, the volume will decrease. In an isothermal process:
p1V1 = p2V2
V2 = p1V1/p2 = (277 torr×187 mL)/571 torr
V2 = 90.7 mL
Se mezclan por error 70 mililitros de solución de HCl 0.5 Normal con 250 mililitros de solución de hidróxido de sodio 0.30 normal. Calcular: El volumen final de la solución resultante El carácter de la solución resultante La concentración final de la solución resultante El pH de la solución resultante El valor del pOH de la solución resultante
Answer:
asxrsse367721479009qqucinübjpnpnfzdh ilo h
Earthquake can produce a sudden vertical change in the seafloor. What can
happen as a result?
O A. Shaking ground
B. Tsunami wave
O C. Pyroclastic flow
D. Sheet erosion
Answer:
Tsunami wave
Explanation:
lol 100% sure
7. What are the chemical formulas for water and calcium chloride?
Answer:
water: H2O
Calcium Chloride: CaCl2
water and calcium chloride: Ca(OH)2 + HCl
Explanation:
CaCl2 + H2O = Ca(OH)2 + HCl
Answer:
Water is H20
Calcium Chloride is CaCI2
What two types of elements are ionic compounds made of?
Answer:
ionic compounds are made from metal and non mental elements
Explanation:
in this case it is know as an ionic compound because it contains a charge. For example, NaCl is simply a compound as it contains no charges (the charges cancel out as Cl is -1 and Na is +1)
but OH- is an ionic compound as it has a charge if -1 (O has a -2 charge and H has a +1 charge, so -2+1=-1 so OH has -1 charge)
A football is inflated to 12psi at 20°C What is the new pressure in the football
when the temperature is lowered to -5C
Answer: The new pressure is 3 psi.
Explanation:
Given: [tex]P_{1}[/tex] = 12 psi, [tex]T_{1} = 20^{o}C[/tex]
[tex]P_{2}[/tex] = ?, [tex]T_{2} = 5^{o}C[/tex]
Formula used is as follows.
[tex]\frac{P_{1}}{T_{1}} = \frac{P_{2}}{T_{2}}\\\frac{12 psi}{20^{o}C} = \frac{P_{2}}{5^{o}C}\\P_{2} = \frac{12 psi \times 5^{o}C}{20^{o}C}\\= 3 psi[/tex]
Thus, we can conclude that the new pressure is 3 psi.
NO LINKS I WILL REPORT IT!
Identify the gas law that
applies to the following scenario: When setting up the decoration for a marathon, a volunteer decides to inflate the balloons inside
an air conditioned trailer. The balloons increased slightly in volume when she when to set them up outside.
• Gay-Lussac's Law
Boyle's Law
Charles' Law
Avogadro's Law
Which of the following is best classified as a compound?
A. Oxygen, because it contains two of same
B. Carbon dioxide, because it contains two different types of atoms
Answer:
The answer is B
Explanation:
Carbon dioxide is a chemical compound that consists of two oxygen atoms and one carbon atom. Carbon Dioxide (CO2) is a gas with a molecular structure composed of two oxygen atoms and one carbon atom.
Hope this helps!
What is the molarity of a solution containing 3.6 mol of KCl in 750 mL?
Answer:
[tex]\boxed {\boxed {\sf 4.8 \ M \ KCl}}[/tex]
Explanation:
The molarity of a solution is found by dividing the moles of solute by the liters. of solvent.
[tex]molarity=\frac{moles}{liters}[/tex]
We know the solution has 3.6 moles of potassium chlorine. We know there are 750 milliliters of solvent, but we need to convert this to liters.
1 liter is equal to 1000 milliliters. Set up a proportion.[tex]\frac {1 \ L }{1000 \ mL}[/tex]Multiply by 750 mL and the units of mL will cancel.[tex]750 \ mL * \frac {1 \ L }{1000 \ mL} = \frac {750 \ mL}{1000 \ mL}= 0.75 \ L[/tex]Now we know the moles and liters, so we can calculate molarity.
moles= 3.6 mol KCl liters= 0.75 LSubstitute these values into the formula.
[tex]molarity= \frac{3.6 \ mol \ KCl}{0.75 \ L}[/tex]
Divide.
[tex]molarity= 4.8 \ mol \ KCl/ L[/tex]
1 mole per liter is equal to 1 molar. Our answer of 4.8 moles of potassium chloride per liter is equal to 4.8 M KCl[tex]molarity= 4.8 \ M \ KCl[/tex]
The molarity of the solution is 4.8 M KCl.
What are some benefits and limitations of using models.
Explanation:
Models do not behave exactly like the things they represent. Accuracy—In order to make models simplistic enough to communicate ideas some accuracy is lost. For example, ball and stick models of atoms do not show all the details that scientists know about the structure of the atom.
Modeling Benefits
Viewing systems from multiple perspectives.
Discovering causes and effects using model traceability.
Improving system understanding through visual analysis.
Discovering errors earlier and reducing system defects.
Exploring alternatives earlier in the system lifecycle.
If 500.0 mL of olive oil, initially at 25.0°C, receives 1.25 kJ of heat energy, what is its final temperature? (Specific heat olive oil = 2.0 J/g °C, density= 0.19 g/mL)
Answer:
500.00
Explanation:
400+20+50+49+17+59
what is the balanced equation of NH3 acting as a base in water
Answer:
NH3 + H2O → NH4+ + OH-
Explanation:
Ammonia, NH3 can act as a base in water (H2O), which serves as the acid, as follows;
NH3 (aq) + H2O (l) → NH4OH (aq)
According to Bronsted–Lowry acid–base theory, NH4+ (ammonium) is the conjugate acid because it can lose hydrogen ion to form the base while OH- is the conjugate base because it can gain hydrogen ion to form the acid. The balanced ionic equation is as follows;
NH3 + H2O → NH4+ (aq) + OH- (aq)
A mixture of 0.119 g of boron trifluoride (BF3) gas and 0.007 g of hydrogen sulfide (H2S) gas is held in a 1.74 L vessel at 19.24 ∘C. What are the mole fractions of the individual gases?
Answer:
jsiei6usjdmcicmsicokfjck jsjdndjksk
Explanation:
gshsjsjjdnbshd had 3the 3most 3PM and humiliatin to get 3rid 3in the body 3to 33and to remove
Match each term with the appropriate definition.
spectroscopy
the study of the absorption and emission of
light by atoms
absorption spectrum
represents energy absorbed as dark bands
atomic spectrum
represents energy emitted or absorbed
during electron jumps
emission spectrum
represents energy emitted as colored lines
Answer:
Spectroscopy — the study of the absorption and emission of light by atoms
Absorption spectrum — represents energy absorbed as dark bands
Atomic spectrum — represents energy emitted or absorbed
during electron jumps
Emission spectrum — represents energy emitted as colored lines
Explanation:
Spectroscopy is an analytical technique to study and analyze using spectrum. It has been the absorption and emission of other light by the atoms. The correct matches are A.1, B. 2, C.3, and D.4.
What is spectroscopy?Spectroscopy is the technique used in chemistry where matter absorbs and emits radiations of a certain wavelength. The absorption spectrum is used to represent absorbed energy in the form of dark bands or lines. Thus, options A.1 and B.2 are correct.
The atomic spectrum is characterized by the black-colored bands that depict the energy absorbed and emitted by an excited atom during electron transitions. Whereas, the emission spectrum shows the colored lines that is the energy emitted when an electron transits from higher to lower energy levels. Thus, options C.3 and D.4 are correct.
Learn more about spectroscopy, here:
https://brainly.com/question/22509226
#SPJ2
11. Write each step of uranium-240 undergoing first an alpha decay then two rounds of beta decay.
Pls HURRY HELPPP MEEEE
lanation:
ExpErnest Rutherford’s experiments involving the interaction of radiation with a magnetic or electric field (Figure 2) helped him determine that one type of radiation consisted of positively charged and relatively massive α particles; a second type was made up of negatively charged and much less massive β particles; and a third was uncharged electromagnetic waves, γ rays. We now know that α particles are high-energy helium nuclei, β particles are high-energy electrons, and γ radiation compose high-energy electromagnetic radiation. We classify different types of radioactive decay by the radiation produced.
Alpha (α) decay is the emission of an α particle from the nucleus. For example, polonium-210 undergoes α decay:
210
84
Po
⟶
4
2
He
+
206
82
Pb
or
210
84
Po
⟶
4
2
α
+
206
82
Pb