Answer: 179 grams
Explanation:
In a chemical reaction, the law of conservation of mass applies, meaning that the total mass of the reactants is equal to the total mass of the products. In this case, the reactants are 162 grams of copper and 17 grams of oxygen, and the product is copper (II) oxide. Using the balanced chemical equation 2Cu + O2 -> CuO, we know that 1 copper atom reacts with 1 oxygen molecule to form 1 copper oxide. Therefore, the mass of copper oxide produced is equal to mass of copper plus mass of oxygen, which is 162g + 17g = 179g.
how many grams and how many atoms of oxygen are in the canister that under standard conditions has 200 dm3 of ozone
Simply multiplying the oxygen molar mass by two yields the molar mass of oxygen gas.
Ozone contains how many oxygen atoms?In our environment, ozone is a gas that exists naturally. O3 is the chemical abbreviation for each ozone molecule, which has three oxygen atoms.One mole of oxygen gas, with the formula O2, weighs 32 g and includes 6.02 x 1023 molecules of oxygen, but also contains 12.04 x 1023 (2 x 6.02 x 1023) atoms of oxygen, since each molecule of oxygen contains two oxygen atoms.Simply multiplying the oxygen molar mass by two yields the molar mass of oxygen gas. Consequently, we are given a molar mass per mole of 32 grams. The main equation can then be changed to reflect the mass and molar mass. After calculating, we come to a conclusion.To learn more about oxygen atoms refer to:
https://brainly.com/question/28009615
#SPJ1
the exothermic dissolution of mg(oh)2(s) in water is represented by the equation above. the ksp of mg(oh)2 is 1.8 x 10-11. which of the following changes will increase the solubility of mg(oh)2 in an aqueous solution? (a) decreasing the ph (b) increasing the ph (c) adding nh3 to the solution (d) adding mg(no3 )2 to the solution
The exothermic dissolution of mg(oh)2(s)will increase the solubility of mg(oh)2 in an aqueous solution increasing the pH.
The solubility of a substance in water is affected by its solubility product constant (Ksp) and the pH of the solution. Ksp is a measure of the maximum concentration of a substance that can be dissolved in water at a given temperature and pressure. In this case, the Ksp of Mg(OH)2 is 1.8 x 10-11.
Increasing the pH of the solution will increase the solubility of Mg(OH)2 because it will shift the equilibrium of the dissolution reaction in favor of the products. This is because the dissolution reaction is exothermic, meaning that heat is released when the Mg(OH)2 dissolves. This heat release causes the equilibrium to shift towards the product side.
On the other hand, decreasing the pH, adding NH3, or adding Mg(NO3)2 will not affect the solubility of Mg(OH)2 in the solution. Hence options a, c, and d are not correct.
Learn more about dissolution
brainly.com/question/2459213
#SPJ4
based on the information given above, which of the following is the strongest acid? responses hx (aq) hx ( aq ) y-(aq)
(B)Y−(aq). based on the information given above, the following is the strongest acid The Y- (aq) symbol represents aqueous Yions. In aqueous solutions, Yions are hydrated ions.
meaning they are surrounded by water molecules. Aqueous solutions are solutions in which water is the solvent, and the solute is a compound that is dissolved in the water. In the case of Y-, the solute is Y ions. Y can be a variety of elements, including but not limited to metals, non-metals, and metalloids. The properties of Y- (aq) will depend on the identity of Y, as well as the concentration of the ions in the solution. For example, highly concentrated solutions of Y- (aq) can be acidic, while dilute solutions may be neutral. Aqueous solutions of Y- (aq) play a crucial role in many natural and industrial processes, such as biochemical reactions, electrochemical processes, and in the production of fertilizers and batteries.
learn more about water here:
https://brainly.com/question/28465561
#SPJ4
the average shot piece is a cylinder with a diameter of 7.5 mm, a height of 2.0 mm, and a mass of .40 g. The average zinc granule is a sphere with a diameter of .84 mm. Using these formulas calculate the total surface area for .40 g of each form of zinc.
Surface are of a cylinder= 2(pi)r2 +2(pi)rh Volume of a sphere = 4/3(pi)r3
Surface area of a sphere= 4(pi)r2 Volume of a cylinder= (pi)r2h
Density of zinc= 7.141g/ml
Answer:
The surface area of a shot piece of zinc would be 4.01 cm2, while the surface area of a zinc granule would be 0.30 cm2. To calculate the surface area of a cylinder, you would use the formula 2(pi)r2 + 2(pi)rh, where r is the radius of the cylinder and h is its height. For a shot piece of zinc, with a diameter of 7.5 mm and a height of 2.0 mm, the radius is 3.75 mm and the surface area is 4.01 cm2. For a zinc granule, with a diameter of .84 mm, the radius is .42 mm and the surface area is 0.30 cm2.
a 0.03 mol sample of c3h8 is reacted with just enough o2 to use up both reactants in a 1 l flask at 300 k. the total pressure in the flask after the reaction is complete is closest to which of the following?
Answer:
A) 5.0 atm
Explanation:
You want to know the pressure in a 1 L flask at 300 K when 0.03 mol of C₃H₈ reacts completely with O₂.
ReactionWe suppose the reaction of interest is ...
C₃H₈(g) +5O₂(g) ⇒ 3CO₂(g) +4H₂O(g)
This shows us there are 3+4 = 7 moles of products for each mole of C₃H₈ in the reaction. That is, there will be 0.03 mole × 7 = 0.21 mole of products.
Gas lawThe gas law equation tells us the final pressure can be computed by ...
PV = nRT
P = nRT/V = (0.21 mol)(0.082 L·atm/(mol·K)(300 K)/(1 L) ≈ 5.166 atm
The total pressure in the flask after the reaction is closest to ...
A) 5.0 atm
What is the correct reading of the temperature in the pictured thermometer? make sure to report your reading with the appropriate significant figures.O 35.90 °CO 35 °CO 35.0 °CO 35.9 °CO 36 °CO 25.9 °C
The correct reading of the temperature as shown in the pictured thermometer is 36°C.
A thermometer is basically a device which is used to measure the temperature. In a mercury thermometer, the thermometer is filled up with mercury. Mercury is a metal which is present in liquid state at room temperature. Mercury an expand and contract with the change in temperature.
When the temperature increases, the mercury in the thermometer expands and rises which we can see in the thermometer and take the reading of the temperature against the scale. In the given temperature, we can observe the reading is at the mark just after the 35°C mark on the scale and hence the temperature reading must be 36°C.
To know more about thermometer here
https://brainly.com/question/28027822
#SPJ4
g devise a detailed mechanism for formation of the major product of the substitution reaction below. h3c ots nabr dmfdraw curved arrows to show electron reorganization for the mechanism step below. make the ends of your arrows specify the origin and destination of reorganizing electrons. arrow-pushing instructions
OTs is a functional group formed by losing hydrogen of p-toluene sulphonic acid. This is a good leaving group, because of the presence of a stable resonance structure.
Here when CH3-CH2-CH2-CH2-OTs reacts with NaBr, a substitution reaction happens. The OTs group is substituted by Br and tosylate is released. DMF or dimethyl formamide used as solvent in such reactions. The main reaction of substitution of bromine to tosylate group is that the conjugate base is quite stable because of the three resonance structures.
Alcohols usually are not prone to substitution reactions. So it is converted to a tosyl or mesyl substitute, so that it is easier to convert it into an alkyl halide. The main benefit of such reactions is that it can be carried out without drastic pH conditions.
So, tosylate acts as a good leaving group in halide substitution reactions.
For more information about substitution reaction on alcohols, kindly refer
https://brainly.com/question/29697459
#SPJ4
One of the simplest hydrocarbon polymers is polyethylene, which has repeating ethylene (C₂H4) units. The average degree of polymerization, or number of repeated monomer units, for polyethylene is 150. Calculate
the average molecular weight of polyethylene.
The molar mass of the polyetheylene molecule is 4200 g/mol.
What is the average molecular weight of the polymer?We know that a polymer is said to be formed by the combination of so many units that are joined together. The single units that we have to join together so as to form the polymer is what we call the monomers.
Now we are told that the number of repeated monomer units, for polyethylene is 150.
Molar mass of the ethylene = 2(12) + 4(1) = 28 g/mol
Molar mass of the polyethylene = 150 * 28 g/mol = 4200 g/mol
Learn more about etheylene:https://brainly.com/question/28303854
#SPJ1
NaF MgO
Boiling Point 1695 3600
Na+ Mg2+ F- Cl- O2-
Ionic Radius 76 72 133 181 140
Based on the data in the table above, which of the following statements provides the best prediction for the boiling point of NaCl?
a. NaCl will have a lower boiling point than NaF because the coulombic attractions are weaker in NaCl than in NaF
b. NaCl will have a boiling point between that of NaF and MgO because the covalent character of the bonds in NaCl is intermediate between that of MgO and NaF
c. NaCl will have a higher boiling point than MgO because the ions are spaced farther apart in NaCl
d. NaCl will have a higher boiling point than MgO because the energy required to transfer electrons from the anion to the cation is larger in NaCl than in MgO
The right response is a. NaCl will have a lower boiling point than NaF because the coulombic attractions are weaker in NaCl than in NaF
The strength of the intermolecular interactions between a compound's particles determines its boiling point. The intermolecular interactions in an ionic compound like NaCl are electrostatic forces of attraction between the positive cations and the negative anions. The particles in an ionic compound are called ions. The charge of the ions and their separation from one another define the strength of these forces.
The cations in NaCl are Na+, while the anions are Cl-. Na+ has a radius of 76 pm, while Cl- has a radius of 181 pm. The distance between the ions in NaCl is higher than that in NaF, which has smaller ions, since the radius of Cl- is greater than that of Na+. As a result, in comparison to NaF, the electrostatic forces of attraction between the ions in NaCl are weaker. This indicates that the boiling point of NaCl is lower than that of NaF because less energy is needed to separate the ions in NaCl.
To learn more about boiling point:
https://brainly.com/question/29233996
#SPJ4
A cube of metallic lead that is 2.500 cm on a side has a mass of 177.34 g at 25° C. What is
the mass (kilograms) of lead in a cylinder that has a diameter of 5.00 cm and a length of
172.4 cm? The volume of a cylinder is V=pi r 2 h. Round to one decimal place.
Answer:
The mass of the lead in the cylinder would be 24.4 kg. To calculate this, you need to first calculate the volume of the cylinder, using V=pi r2 h. With a diameter of 5 cm, the radius is 2.5 cm, and the height is 172.4 cm. Thus, the volume of the cylinder is 435.3 cm3. Then, to find the mass, you need to multiply the volume by the density of lead, which is 7.37 g/cm3 at 25° C. This gives you a mass of 24.4 kg.
This anion rapidly undergoes an intramolecular proton transfer; which the negatively charged oxygen atom abstracts the nearby acidic proton Draw the cunro GoC showing proton transter reaction; and modify the given structure to draw the product of that proton transfer Lone pairs are not required in the product: Identify which side of the equilibrium is favored and explain vour answer O The forward direction tavored because the anion in the product is stabilized by resonance, making the product weaker base. O The reverse direction is favored because the anion in the product is stabilized by resonance, making the product stronger base O The forward direction favored because the anion in the reactant on the more electronegative atom, making the reactant weaker base. O The reverse direction is favored because the anion in the reactant on the more electronegative atom, making the reactant stronger base.
agriculture. The largest source of pollution to the Bay comes from agricultural runoff, which contributes roughly 40 percent of the nitrogen and 50 percent of the phosphorus entering the Chesapeake Bay.
Airborne nitrogen is one of the most significant polluters of the Chesapeake Bay and its tributaries. Excess nitrogen may drive the growth of algae blooms, preventing sunlight from reaching underwater grasses and creating low-oxygen "dead zones" that smother marine life. Nitrogen and phosphorus occur naturally in aquatic habitats, but human activities such as fertilizer usage, wastewater management, fossil fuel combustion, and soap and detergent discharge inject excess nutrient pollution into ecosystems quicker than ecosystems can respond. 1At Home and Around the Neighborhood: Fertilizers, yard and pet waste, and some soaps and detergents contain nitrogen and phosphorus and, if not utilized or disposed of appropriately, can contribute to nutrient contamination.
learn more about Chesapeake Bay here:
https://brainly.com/question/14295402
#SPJ4
1-chloro-2-pentene undergoes hydrolysis in warm water to give a mixture of 2-penten-1-ol and 1-penten-3-ol. draw the structure of the intermediate's resonance contributor leading to the formation of 2-penten-1-ol.
2-penten-1-ol is a primary allylic alcohol that is 2-pentene in which a hydrogen at position 1 has been replaced by a hydroxy group.
Define penten -1?
A colourless flammable liquid alkene having several straight-chained isomeric forms, used in the manufacture of organic compounds. Formula: C5H10. Also called: amylene, pentylene. Collins English Dictionary.The chemical formula for pentanol is C5H12O C 5 H 12 O , which indicates the presence of five carbons, twelve hydrogens, and one oxygen atom. The pentanol structural formula, which indicates the bonding arrangement within the molecule, is CH3(CH2)3CH2OH C H 3 ( C H 2 ) 3 C H 2 O H .1-Pentanol, (or n-pentanol, pentan-1-ol), is an alcohol with five carbon atoms and the molecular formula C5H11OH. 1-Pentanol is a colourless liquid with a distinctive aroma. It is the straight-chain form of amyl alcohol, one of 8 isomers with that formula.To learn more about penten refers to:
https://brainly.com/question/20068688
#SPJ4
n the following atomic model, where does the strong nuclear force happen? A diagram of an atom has three rings, labeled from outside to inside A, B, and C. A and B each carry two electrons. Inside ring C are 4 protons and 5 neutrons. outside A between A and B between B and C inside C
Option (D) is the appropriate response. Three rings make up an atom's diagram, and they are labelled A, B, and C from outside to inside.
Each of the two electrons in A and B. There are 4 protons and 5 neutrons inside ring C. In the atomic model shown below, C is where the strong nuclear force manifests itself.
Describe the atomic hypothesis.According to the atomic hypothesis, atoms make up the building blocks of matter. The scientific theory is that of atoms.
As a result of the foregoing conclusion, we can state that a diagram of an atom contains three rings, each of which is designated A, B, and C from outside to inside. Each of the two electrons in A and B. There are 4 protons and 5 neutrons inside ring C.
In the atomic model shown below, C is where the strong nuclear force manifests itself.
Option (D) is the appropriate response, thus.
To learn more about Atomic theory from given link
https://brainly.com/question/16360147
#SPJ1
which of the following statements best explains the trend in the molar solubility of in various concentrations of shown in the graph above? (a) higher concentrations of allow less to dissolve before the solution becomes saturated. (b) higher concentrations of lead to more favorable attractions between ions and ions, thus less dissolves. (c) higher concentrations of produce more through hydrolysis, causing to precipitate, thus more dissolves. (d) higher concentrations of cause the
The trend in the molar solubility of in different concentrations seen in the graph above appears to be best explained by the statement (a) "increasing concentrations of allow less to dissolve before the solution
The amount of a material present in a mixture or solution is referred to as its concentration. Different units, such as molarity (moles of solute per litre of solution), molality (moles of solute per kilogramme of solvent), or mass percentage, can be used to quantify them (mass of solute as a percentage of total mass). Concentrations play a key role in chemistry for predicting reaction behaviour and figuring out how much of a material to add to a solution. Concentrations are crucial in figuring out how various chemicals affect living things and the environment in sectors like environmental science and medicine.
Learn more about concentrations here:
https://brainly.com/question/10725862
#SPJ4
The element magnesium occurs naturally in the following isotopic forms magnesium 24 with a mass of 23.99
amu and an abundance of 78.70%, Magnesium 25 with a mass of 24.99 amu and an abundance pf 10.13%,
and Magnesium 26 with a mass of 25.98 amu and an abundance of 11.17%. What is the average atomic mass?
Considering the definition of atomic mass, isotopes and atomic mass of an element, the average atomic mass of magnesium is 24.31 amu.
Definition of atomic massThe number of protons and neutrons determine the mass number of an element.
Definition of isotopeAn isotope is an atom that belongs to the same chemical element as another. Isotopes have the same number of protons, but different numbers of neutrons.
Definition of atomic massThe atomic mass of an element is the weighted average mass of its natural isotopes.
In other words, the atomic masses of chemical elements are usually calculated as the weighted average of the masses of the different isotopes of each element, taking into account the relative abundance of each of them.
Atomic mass of the element in this caseIn this case, you know:
Magnesium 24 has a mass of 23.99 amu and an abundance of 78.70%. Magnesium 25 has a mass of 24.99 amu and an abundance of 10.13%.Magnesium 26 has a mass of 25.98 amu and an abundance of 11.17%The average atomic mass of magnesium is calculated as:
Average atomic mass= 23.99 amu×0.787 + 24.99 amu×0.1013 + 25.98 amu×0.1117
Average atomic mass= 24.31 amu
Finally, the average atomic mass is 24.31 amu.
Learn more about average atomic mass:
brainly.com/question/4923781
brainly.com/question/1826476
brainly.com/question/15230683
brainly.com/question/7955048
#SPJ1
Which of the following best describes a polar covalent bond?
4
Electrons are shared unequally between two atoms.
Electrons are shared equally between two atoms.
O Electrons are transferred from one atom to another to generate oppositely charged ions that are attracted to one another.
O Brief fluctuations in electron density create oppositely charged regions in two atoms that then attract one another
Electrons are shared unequally between two atoms in polar covalent bond.
What is covalent bond?A covalent bond contains the mutual sharing of one/more pairs of electrons between two atoms. A covalent bond is formed when the difference in electronegativity between two atoms is too small for electrons to move to form an ion.A covalent bond is a chemical bond in which electrons are shared to form electron pairs between atoms. These pairs of electrons are known as shared pairs or bond pairs. A stable balance of attractive and repulsive forces between atoms when sharing electrons is called a covalent bond. A covalent bond involves the sharing of electrons between two or more atoms.An ionic bond is formed when two or more ions come together and are held together by a difference in charge.to learn more about covalent bond from the given link:
https://brainly.com/question/10777799
#SPJ1
manipulating unconventional ch-based hydrogen bonding in a methyltransferase via noncanonical amino acid mutagenesis
Noncanonical amino acid mutagenesis can be used to manipulate atypical CH-based hydrogen bonding in a methyltransferase. This procedure includes inserting non-natural amino acids.
might result in changed substrate identification and catalytic efficiency, allowing manipulation of the hydrogen bonding network and the methylation process. Noncanonical amino acid mutagenesis can be utilized to investigate the significance of unusual CH-based hydrogen bonding in methyltransferase activity, perhaps leading to the identification of novel therapeutic targets.Noncanonical amino acid mutagenesis can be used to manipulate atypical CH-based hydrogen bonding in a methyltransferase. This procedure includes inserting non-natural amino acids.Noncanonical amino acid mutagenesis can be used to manipulate atypical CH-based hydrogen bonding in a methyltransferase. This procedure includes inserting non-natural amino acids.
learn more about amino acid here:
https://brainly.com/question/28409615
#SPJ4
at a certain temperature the rate of this reaction is second order in with a rate constant of suppose a vessel contains at a concentration of . calculate how long it takes for the concentration of to decrease to of its initial value. you may assume no other reaction is important. round your answer to significant digits. g
Concentration of A to decrease to 1/e (37%) of its initial value is approximately 2.1 seconds. The rate of a second-order reaction is given by the equation: rate = k[A]^2 .
Where k is the rate constant and [A] is the concentration of the reactant. Given that the rate constant is k = and the initial concentration of A is [A]0 = , we can use the above equation to determine the rate of the reaction.
rate = k[A]^2 = ()( )^2
To find out how long it takes for the concentration of A to decrease to 1/e (37%) of its initial value, we can use the following equation:
[A] = [A]0e^(-kt) ,
Where t is the time in seconds.
Given that we want the final concentration of A to be
1/e (37%) of the initial concentration,
we can set up the following equation:
( ) = ( )e^(-kt) ; and solve for
t: t = -(1/k)ln(1/e)
t = -(1/( ))(ln(1/e))
t = -(1/( ))(ln(0.37))N
t = (1/( ))ln(2.70)
t ≈ 2.1 sec
So the time it takes for the concentration of A to decrease to 1/e (37%) of its initial value is approximately 2.1 seconds.
Learn more about rate constant here :
https://brainly.com/question/20305871
#SPJ4
Which of the following best explains how these layers can become rock over many years?
Convert kilocalories to joules. Select the correct units and conversion factors for each step in the following unit roadmap.
kcal > > > > J
Options:
1 kcal/ 10^3 cal
1 cal / 4.184 J
1 kcal/ 4.184 kJ
mol
4.184 kJ/ 1 kcal
10^3/ 1 kcal
cal
4.184 J/ 1 cal
The exact values and conversion factors are kcal > 103 cal/ 1 kcal > cal > 4.184 J/ 1 cal > J for each step.
Conversion factor: What is it?A ratio written as a proportion that equals one is referred to as a conversion factor. In order to have identical measurements represented in new units when we apply calculations to transform units, we multiplied our previous measurement by both the conversion factor.
Why are fundamental conversion elements crucial?Showing someone the precise amount you have will be helpful. help with a mathematical equation, especially one involving chemistry where the solution can be found by following the units. Indicate the person's preferred system of measurement. Molarity is the unit of quantifiable concentration measurement that chemists utilize the most.
To know more about conversion factors visit:
https://brainly.com/question/28366871
#SPJ4
write a balanced equation for the important atmospheric reaction depicted below (carbon is black; oxygen is red): e.g. 2n2 2o2 goes to 4no (no spaces between coefficient and compound and the , spaces between goes to)
The balanced equation for the important atmospheric reaction depicted below is:
C + O2 -> CO2
This reaction represents the combustion of carbon (C) with oxygen (O2) to form carbon dioxide (CO2). In this reaction, one molecule of carbon combines with one molecule of oxygen to form one molecule of carbon dioxide. This reaction is important in the atmosphere because it is one of the main ways that carbon is removed from the atmosphere and stored in the form of carbon dioxide. This reaction also plays a key role in the global carbon cycle and is a major contributor to climate change.
To learn more about atmospheric reaction:
https://brainly.com/question/23287233
#SPJ4
choose the name-formula pair that does not correctly match. group of answer choices calcium acetate ca(ch3coo)2 aluminum phosphate alpo4 ammonium sulfide nh4s magnesium hydroxide mg(oh)2 zinc carbonate znco3 ammonium nitrate nh4no3 ferric chloride fecl3 lithium hypochlorite liclo
Ammonium sulfide nh4s is the name-formula pair that is incorrectly matched.
What does the word "formula" mean?The formula is a fact or a rule that is expressed using mathematical symbols. Normally, three or more values are connected by an equal sign. When you know the value of one quantity, you may apply the formula to determine how much the other quantity is worth.
Why is baby formula in short supply?Following that, demand fell as households decided not to make purchases and instead made do about what they already had. When a result, formula producers would have to produce less as the market changed. Delays: Supply chain bottlenecks brought on by the epidemic continue to affect the production of baby formula. With the maker Abbott, delays brought on by the weather have also happened.
To know more about formula visit:
https://brainly.com/question/29886204
#SPJ4
equipment needed to measure moles in chemistry?
The equipment needed to measure moles in chemistry would be the weighing balance.
Moles of substancesIn chemistry, the mole of a substance is the ratio of the mass of the substance and its molar mass. It is otherwise known as the number of moles in substances and can be mathematically expressed as:
Mole = mass/molar mass
Thus, in order to find the number of moles present in a substance, the mass of the substance must be known and the molar mass is calculated appropriately.
Since the molar mass of substances is determined from the sum of molar masses of atoms of elements present in the chemical formula of the substance, the molar mass is theoretical.
However, to find the mass of the substance, it has to be weighed using a suitable measuring scale, usually in the form of a weighing balance.
More on moles of substances can be found here: https://brainly.com/question/14200405
#SPJ1
Which of the following compounds are the same?
Compound 1: 1.10 g of H and 8.90 g of O.
Compound 2: 4.95 g of H and 40.05 g of O.
Compound 3: 2.10 g of H and 32.90 g of O.
Compound 4: 4.70 g of H and 60.30 g of O
A. Compounds 1 and 4
B. Compounds 2 and 3
C. Compounds 1 and 2
The compounds that are the same among the given options are as follows: compound 1 and 2 (option C).
What is a chemical compound?A chemical compound is a substance formed by the union of two or more chemical elements in a fixed ratio, the union being a chemical bond.
A chemical compound is made up of elements with given proportions. According to this question, a compound made up of hydrogen and oxygen with different proportions.
Based on the given proportions of hydrogen and oxygen in the above compounds, compound 1 and 2 are similar because they have an equal ratio of 8.09 i.e.
Compound 1: 8.90g/1.10g = 8.09Compound 2: 40.05g/4.95g = 8.09Learn more about compound at: https://brainly.com/question/12166462
#SPJ1
please help me on my living environment homework
Between 80 to 88%, which is equivalent to that of typical plant meals but somewhat less than that of animal proteins
What nutrients may be found in meals made from crickets?The macro- and micro-mineral elements calcium, potassium, magnesium, phosphorus, sodium, iron, zinc, manganese, and copper are all present in significant amounts in nutrients crickets. Additionally, the crickets are abundant in the necessary amounts of vitamins including those in the B group as well as vitamins A, C, D, E, and K.Between 80 to 88%, which is equivalent to that of typical plant meals but somewhat less than that of animal proteins, S. icipe and G. bimaculatus' protein digestibility was measured. In comparison to plant and animal sources, the iron, zinc, and potassium concentrations of both cricket species were much greater.To learn more about nutrients refer to:
https://brainly.com/question/9348916
#SPJ1
A group of engineers has just conducted an experimental trial on a shoe designed to help people suffering from a painful foot disorder. During the trial the show proved effective for only 5% of the test subjects. What should the engineers do next
The engineers do next to find out if the sole of the shoe can be redesigned. Therefore, option B is correct.
What is the effect of a trial experiment?The trial experiment is defined as the application of the research product to a specific population before it is introduced to the market.
The effect of the research to the greater percentage of the subject made the product to the market.
The engineering shoe product was only effective for a small percentage of the population, making it less effective. It has been discovered that the knee problem is related to the shoe sole.
Thus, option B is correct.
To learn more about the trial experiment, follow the link;
https://brainly.com/question/2029264
#SPJ1
Your question is incomplete, most probably your question was
A group of engineers has just conducted an experimental trial on a shoe
designed to help people suffering from a painful foot disorder. During the trial,
the shoe proved effective for only 5% of the test subjects. What should the
engineers do next?
A. Use a cheaper material to make the shoe more profitable.
O
B. Find out if the sole of the shoe can be redesigned
O
C. Begin to market this new shoe to patients and doctors.
D. Conduct the test again.
Distinguish between the differential rate law and the integrated ratelaw. Which of these is often called just the "rate law"? What is k in a rate law, and what are orders in a rate law? Explain.
Differential rate law describes the rate of reaction as a function of reactant concentrations, changing with time. Integrated rate law describes the change in reactant concentration over time and is often used to find the half-life of a reaction.
The term "rate law" is commonly used to refer to the integrated rate law. K in a rate law is the rate constant, a value specific to each reaction that determines the rate of reaction. Orders in a rate law describe the dependency of the reaction rate on the concentration of each reactant, with each reactant having its own order. The overall reaction order is the sum of the individual orders, which can be determined through experiments.
Learn more about rate law here: brainly.com/question/7694417
#SPJ4
fill in the blank. when working in the fume hood, it is important to make an effort to minimize choose___ only keep items in the hood if they are being used for choose___ do not choose___chemicals in the fume hood unless instructed to do so.
When working in the fume hood, it is important to make an effort to minimize choose clutter only keep items in the hood if they are being used for choose the current experiment do not choose store chemicals in the fume hood unless instructed to do so.
When you are not working in the hood, keep the sash closed. Maintain a safe distance between your face and the fume hood. Unless you're utilizing a walk-in fume hood, the only part of your body within the hood should be your hands. The sash serves as a barrier and provides protection while performing dangerous work.
Use at least 6 inches of space inside the fume hood behind the sash plane. As stated by industry standards such as ANSI/AIHA Z9, this is vital for safety as a good working practice. This means that no equipment in the fume hood should come into contact with the front airfoil of the work surface.
For more information on fume hood kindly visit to
https://brainly.com/question/29582094
#SPJ4
which reactant in each pair of reactants below, select the one that is more nucleophilic. (a) -(ch3)3p (b) (ch3)3n. (c) cl- or (d) h2o.(e) BF3 or F-(f) I- or Cl-
Option b is the proper answer. (ch3) In each pair of reactants below, 3n is one of the reactants, and (ch3)3n is the more nucleophilic of the two. In chemistry, a nucleophile is a chemical entity that forms bonds.
letting go of two electrons. All ions and molecules containing at least one pi bond or a free pair of electrons are considered nucleophiles. Because they give up electrons, Lewis bases are nucleophiles. When two or more atoms, molecules, or ions form a chemical connection, also known as chemical bonding, the result is a chemical compound. These chemical bonds are responsible for holding the atoms of the resultant molecule together. A chemical link is an attraction between atoms. This attraction could be attributed to a variety of different behaviours.
Learn more about nucleophile here
https://brainly.com/question/28325919
#SPJ4
Give the number of d electrons for the central metal ion in the following compounds:
(a) [Cr(H2O)6](ClO3)2
(b) [Mn(CN)6]^2-
(c) [Ru(NO)(en)2Cl]Br
(d) [Ru(NH3)5Cl]SO4
(e) Na2[Os(CN)6]
(f) [Co(NH3)4CO3I]Â
(a) Chromium in the compound Cr(H2O)62 has 6d electrons.
(b) Manganese in the compound [Mn(CN)6]^2- has 5d electrons.
(c) Ruthenium in the compound [Ru(NO)(en)2Cl]Br has 8 d electrons.
(d) Ruthenium in the compound [Ru(NH3)5Cl]SO4 has 8 d electrons.
(e) Osmium in the compound Na2[Os(CN)6] has 8 d electrons.
(f) Cobalt in the compound [Co(NH3)4CO3I] has 9 d electrons.
Chromium in the compound Cr(H2O)62 has 6d electrons. Chromium is a transition metal, and it is in the +3 oxidation state in this compound. The electronic configuration of Cr in the +3 state is [Ar] 3d3. This means that the 3d sub-shell of the Chromium atom is occupied by 3 electrons, and the remaining 3 electrons are present in the 4s sub-shell.
Manganese in the compound [Mn(CN)6]^2- has 5d electrons. Manganese is a transition metal, and it is in the +2 oxidation state in this compound. The electronic configuration of Mn in the +2 state is [Ar] 3d5. This means that the 3d sub-shell of the Manganese atom is occupied by 5 electrons, and the remaining 2 electrons are present in the 4s sub-shell.
Ruthenium in the compound [Ru(NO)(en)2Cl]Br has 8d electrons. Ruthenium is a transition metal, and it is in the +3 oxidation state in this compound. The electronic configuration of Ru in the +3 state is [Kr] 4d8. This means that the 4d sub-shell of the Ruthenium atom is occupied by 8 electrons.
Ruthenium in the compound [Ru(NH3)5Cl]SO4 has 8 d electrons. Ruthenium is a transition metal, and it is in the +3 oxidation state in this compound. The electronic configuration of Ru in the +3 state is [Kr] 4d8. This means that the 4d sub-shell of the Ruthenium atom is occupied by 8 electrons.
Osmium in the compound Na2[Os(CN)6] has 8 d electrons. Osmium is a transition metal, and it is in the +4 oxidation state in this compound. The electronic configuration of Os in the +4 state is [Xe] 4f14 5d8. This means that the 5d sub-shell of the Osmium atom is occupied by 8 electrons.
Cobalt in the compound [Co(NH3)4CO3I] has 9 d electrons. Cobalt is a transition metal, and it is in the +3 oxidation state in this compound. The electronic configuration of Co in the +3 state is [Ar] 3d7 4s2. This means that the 3d sub-shell of the Cobalt atom is occupied by 7 electrons, and the remaining 2 electrons are present in the 4s sub-shell.
Learn more about transition metals here:
https://brainly.com/question/1618364
#SPJ4