15. What is the name of an account managed by a third party who makes
payments according to a set of instructions, often used for insurance and tax
payments for a mortgage?

The trigonometry ratio that would be used to find a and x is 13. Sine and 14. Tangent.

The right triangle is the foundation of trigonometry. Hence, one of the relationships in that right triangle is defined by the tangent. The ratio of the opposing side to the adjacent side of a specific right triangle angle is the connection that the tangent specifies. You must first identify the hypotenuse in order to find the tangent. The hypotenuse is generally the longest side of the right triangle. After labelling your sides, you proceed to take the proper ratio.

The value of a is opposite to the given angle.

Here, the value of hypotenuse is also known.

Hence, the trigonometric identity that gives the relationship between opposite side and hypotenuse is sine. Option A is the correct answer.

14. For the triangle the segments are opposite side and adjacent side to the given angle.

Hence, the trigonometric identity that gives the relationship between opposite side and adjacent side is tan. Option C is the correct answer.

Learn more about tangent here:

https://brainly.com/question/19064965

#SPJ1

4/13 is the probability of drawing a club out of the deck of card if a card at random is selected from a 52-card deck.

There are 13 clubs and 4 jacks in a standard 52-card deck. However, we need to be careful not to double-count the jack of clubs, which is both a club and a jack.

So the number of cards that are either a club or a jack (excluding the jack of clubs) is:

13 (clubs) + 4 (jacks) - 1 (jack of clubs) = 16

Therefore, the probability of drawing a club or a jack (excluding the jack of clubs) is:

P(club or jack) = number of favorable outcomes / total number of outcomes

= 16 / 52

= 4 / 13

So the probability of drawing a club or a jack is 4/13.

Learn more on probability here: https://brainly.com/question/25870256

#SPJ1

The length of segment BD, considering the Geometric Mean Theorem, is given as follows:

C. 8 units.

The geometric mean theorem in a triangle states that the length of a line segment joining the midpoints of two sides of a triangle is equal to the geometric mean of the lengths of those two sides.

The lengths of the two sides for this problem are given as follows:

4 and 16.

Hence the length of segment BD is obtained with the geometric mean of 4 and 16, as follows:

BD = sqrt(4 x 16)

BD = sqrt(64)

BD = 8 units.

Hence the correct option for this problem is given by option C.

More can be learned about the geometric mean theorem at brainly.com/question/10216660

#SPJ1

In response to the query, we can state that therefore, the three angle statements that are always true regarding the diagram are: m∠5 + m∠3 = m∠4 and m∠3 + m∠4 + m∠5 = 180° and m∠5 + m∠6 =180°

An angle is a shape in Euclidean geometry made composed of two rays, referred to as the angle's sides, that come together at a centre point known as the angle's vertex. An angle that is in the plane where the rays are placed can be produced by two rays. Another angle is produced when two planes collide. Dihedral angles are the name given to them. In planar geometry, an angle is the form made by two rays or lines that share a termination. The English word "angle" derives from the Latin word "angulus," which means "horn." The vertex, also known as the angle's sides, is where the two rays' common terminals meet.

To answer this question, we can use the following facts about the angles in a triangle:

The sum of the interior angles of a triangle is always 180 degrees.

An exterior angle of a triangle is equal to the sum of the two opposite interior angles.

Using these facts, we can analyze the diagram and make the following conclusions:

m∠5 + m∠3 = m∠4 is always true because angle 4 is the exterior angle at angle 3, so m∠4 = m∠3 + m∠5.

m∠3 + m∠4 + m∠5 = 180° is always true because the sum of the three exterior angles of a triangle is always 360 degrees (i.e., one full rotation), so m∠3 + m∠4 + m∠5 = 360°. Also, we know that m∠3 + m∠5 = m∠4, so substituting this gives m∠4 + m∠4 = 360°, which simplifies to 2m∠4 = 360°, or m∠4 = 180° - m∠3 - m∠5. Substituting this into the original equation gives m∠3 + m∠4 + m∠5 = 180°.

m∠5 + m∠6 =180° is always true because angle 6 is the exterior angle at angle 5, so m∠6 = m∠5 + m∠3. Substituting this into the equation gives m∠5 + m∠5 + m∠3 = 180°, which simplifies to m∠5 + m∠6 = 180°.

Therefore, the three statements that are always true regarding the diagram are:

m∠5 + m∠3 = m∠4

m∠3 + m∠4 + m∠5 = 180°

m∠5 + m∠6 =180°

To know more about angles visit:

https://brainly.com/question/14569348

#SPJ1

The value of a in the function f(x) = ax² + 7x + 2 when differentiated is 13/x

Given that the function is represented as

f(x) = ax² + 7x + 2

Also, we have the differentiated function to be

∆ = 33​

This means that we differentiate f(x) and set the value to 33

When f(x) is differentiated, we have

∆ = 2ax + 7

By equating the functions, we have

2ax + 7 = 33

This gives

2ax = 26

So, we have

a = 13/x

Hence, the value of a is 13/x

read more about derivatives at

https://brainly.com/question/25324584

#SPJ1

Answer:

1.2 x 10^3 = 1,200

1.2 x 10^-2 = 0.012

1.2 x 10^2 = 120

1.2 x 10^-4 = 0.00012

Step-by-step explanation:

Answer:

From the first piece of information, we can set up an equation:

D - 7 = 9(G - 7)

Simplifying this equation, we get:

D - 7 = 9G - 63

D = 9G - 56

From the second piece of information, we can also set up an equation:

D - 6 = 7(G - 6)

Simplifying this equation, we get:

D - 6 = 7G - 42

D = 7G - 36

Now we can combine the two equations:

9G - 56 = 7G - 36

Solving for G, we get:

2G = 20

G = 10

So currently, Grogg is 10 years old. We can substitute this value back into either equation to find his dad's age:

D = 9G - 56

D = 9(10) - 56

D = 34

Therefore, Grogg's dad is currently 34 years old.

Step-by-step explanation:

Its CDF shows the probability of each value of X. is correct.

Probability is the measure of the likelihood that an event will occur. It is the ratio of the number of outcomes favorable to the event divided by the total number of possible outcomes. Probability is expressed as a number between 0 and 1, where 0 indicates that the event is impossible and 1 indicates that the event is certain to occur.

The binomial distribution is a probability distribution that shows the probability of a success or failure outcome in an experiment that is repeated multiple times. Its PDF (probability density function) shows the probability of each possible value of X, and its CDF (cumulative density function) shows the probability of each value of X and all values of X less than it.

To learn more about probability
https://brainly.com/question/25839839
#SPJ1

Answer:

Each person would get 1/8 of the pizza if they were to share it equally.

Step-by-step explanation:

The line of best fit for this set of points is y = -1.00x + 9.00.

Coefficient is a value that is used to indicate the degree or amount of a certain property or characteristic. It is usually used in mathematics and physics, and is a numerical measure of how two variables are related. For example, the coefficient of friction is a number that indicates how much resistance there is between two surfaces when one is sliding over the other. In economics, the coefficient of elasticity is used to measure how much of a change in one variable affects a change in another.

Linear regression is a technique used to find the line of best fit for a given set of points. To use linear regression, we must first calculate the mean of all the x and y coordinates. The mean of the x coordinates is 4, and the mean of the y coordinates is 4.5.

We then calculate the sum of the squared differences between the x and y coordinates and their respective means. This sum is 36.5.

Next, we calculate the sum of the products of the differences between the x and y coordinates and their respective means. This sum is -25.

Using the formula for linear regression, we can calculate the slope of the line of best fit. The slope is -1.00.

To calculate the y-intercept of the line of best fit, we use the slope and the mean of the x and y coordinates. The y-intercept is 9.00.

The line of best fit for this set of points is y = -1.00x + 9.00.

To know more about slope click-
https://brainly.com/question/3493733
#SPJ1

The radian measure of the angle that forms an arc of length 38 inches in Circle O is approximately 1.9 radians.

What is an angle ?

The length of an arc of a circle is given by the formula:

length of arc = radius * angle in radians

Let x be the radian measure of the angle that forms an arc of length 38 inches in Circle O. Then we can write:

38 = 20x

Solving for x, we get:

x = 38/20

x = 1.9 radians (to the nearest tenth)

Therefore, the radian measure of the angle that forms an arc of length 38 inches in Circle O is approximately 1.9 radians.

What is an arc?

In geometry, an arc is a segment of a curve, such as a circle or an ellipse. It is defined as the portion of the curve that lies between two distinct endpoints. An arc is named based on its endpoints, and it can be classified as a minor arc, major arc, or semicircle depending on its length. A minor arc is an arc that measures less than 180°, a major arc is an arc that measures more than 180°, and a semicircle is an arc that measures exactly 180°. The measure of an arc is typically given in degrees or radians, and it can be calculated using the formula:

measure of arc = (central angle/360) * 2πr

where r is the radius of the circle, and the central angle is the angle that the arc subtends at the center of the circle.

To know more about angle, visit:

https://brainly.com/question/28451077

#SPJ1

The graph that shows the line y = - 3 x + 1 would be B. Graph B.

To find the graph, you need to find the x and y values from the given equation of line y=-3x+1.

Then look at the graph that has these points.

For x = -2:

y = -3(-2) + 1

y = 6 + 1

y = 7

For x = -1:

y = -3(-1) + 1

y = 3 + 1

y = 4

For x = 0:

y = -3(0) + 1

y = 0 + 1

y = 1

For x = 1:

y = -3(1) + 1

y = -3 + 1

y = -2

For x = 2:

y = -3(2) + 1

y = -6 + 1

y = -5

For x = 3:

y = -3(3) + 1

y = -9 + 1

y = -8

So, the y values for x = -3 to x = 3 are:

x = -3: y = 10

x = -2: y = 7

x = -1: y = 4

x = 0: y = 1

x = 1: y = -2

x = 2: y = -5

x = 3: y = -8

The graph that has these points is therefore Graph B.

Find out more on graphs at https://brainly.com/question/14474675

#SPJ1

The prοbability οf getting vοwel card twice is 6.25%

Prοbability is a way οf calculating hοw likely sοmething is tο happen. It is difficult tο prοvide a cοmplete predictiοn fοr many events. Using it, we can οnly fοrecast the prοbability οr likelihοοd, οf an event οccurring. The prοbability might be between 0 and 1, where 0 denοtes an impοssibility and 1 denοtes a certainty.

Here Tοtal number οf card frοm A tο L = 12.

The vοwel between A tο L = A,E,I

Number οf vοwel = 3

Nοw the prοbability

=> Number οf favοrable incοme/ Tοtal number οf οutcοme

Here Tο draw vοwel  in first, the prοbability =  3/12= 1/4

Nοw again the prοbability οf drawing vοwel in secοnd = 3/12 = 1/4.

Then probability of getting vowel twice = [tex]\frac{1}{4} \times \frac{1}{4}[/tex] = 1/16

=> [tex]\frac{1}{16}\times100[/tex] = 6.25%.

Hence the probability of getting vowel card twice is 6.25%.

To learn more about probability refer the below link

https://brainly.com/question/13604758

#SPJ1

The student applied the reflection before the translation, which is incorrect. (error) The correct sequence of transformations is a translation followed by a reflection across the vertical line. (Correct response)

In mathematics, a sequence is an ordered list of numbers, usually denoted by {a1, a2, a3, ...}, where each element in the list is called a term or a member of the sequence. Sequences can be finite or infinite, and they can be defined by a formula, a recursive rule, or simply by listing the terms.

by the question.

The student's mistake is that a reflection followed by a translation is not equivalent to just a translation. In other words, the order of the transformations matters.

To correct the mistake, the student could perform the translation first and then the reflection across the vertical line.

The student did not specify the location of the vertical line of reflection. The correct response is to specify the line of reflection that maps the corresponding sides of the trapezoids onto each other.

To correct the mistake, the student would need to carefully analyze the two trapezoids and their corresponding parts, and consider whether any stretching or skewing is necessary to achieve an exact mapping. Alternatively, the student could use a different method of transformation, such as a rotation or a combination of rotations and translations.

To learn more about vertical:

https://brainly.com/question/27029296

#SPJ9

The height of the tubes is 11.68 inch  

The formula for the surface area of a cylinder is:

Where

Here we have

The surface area of the tube is 172 in² and the radius is 2 inches.  

Using the formula,

Surface area of Tube  = 2π (2) (2+ h)

= 4π(2 + h)

From the given data,

The surface area of the tube = 172  

=> 4π(2 + h) = 172

=> π(2 + h) = 43    

=> 44/7 + 22h/7 = 43

=> 44 + 22h = 301

=> 22h = 257

=> h = 11.68 inch  

Therefore,

The height of the tubes is 11.68 inch  

Learn more about Cylinders at

https://brainly.com/question/22074027

#SPJ1

Answer:

First option, (4, -6)

Step-by-step explanation:

Scaled by 2. Multiply each coordinate of point C by 2.

(2*2, -3*2) = (4, -6)

By answering the presented question, we may conclude that This equation equation demonstrates that 36 equals the result of multiplying 3 by 12.

A math equation is a technique that links two assertions and denotes equivalence using the equals sign (=). In algebra, an equation is a mathematical statement that proves the equality of two mathematical expressions. For example, in the equation 3x + 5 = 14, the equal sign separates the numbers 3x + 5 and 14. A mathematical formula may be used to understand the link between the two phrases written on either side of a letter. The logo and the programmed are usually interchangeable. As an example, 2x - 4 equals 2.  

The comparison "36 is three times as numerous as 12" may be written as follows:

36 = 3 x 12

This equation demonstrates that 36 equals the result of multiplying 3 by 12.

To know more about equation visit:

https://brainly.com/question/649785

#SPJ1

The final point after both reflections would be (8, 5).

what is a graph?

A graph is a visual representation of data, typically in the form of a diagram or chart, used to show the relationship between different variables or quantities. Graphs are commonly used to display data in a way that makes it easier to understand and analyze.

Graphs can take many different forms, depending on the type of data being presented and the purpose of the graph. Some common types of graphs include:

Line graphs: Used to show trends over time.

Bar graphs: Used to compare different values or quantities.

Pie charts: Used to show the proportion of different components of a whole.

Scatter plots: Used to show the relationship between two variables.

Histograms: Used to show the frequency distribution of a set of data.

To reflect a point across the x-axis, we simply change the sign of the y-coordinate. So if we start with the point (-8, -5), its reflection across the x-axis would be (−8, 5).

To reflect a point across the y-axis, we change the sign of the x-coordinate. So reflecting the point (−8, 5) across the y-axis would give us (8, 5).

Therefore, the final point after both reflections would be (8, 5).

To learn more about graph from the given link:

https://brainly.com/question/17267403

#SPJ1

Answer:

  1/2

Step-by-step explanation:

You want the limit ...

  [tex]\displaystyle \lim_{t\to\infty}{\dfrac{t-3}{\sqrt{4t^2+25}}}[/tex]

In general, for polynomial-like functions, the limit is the ratio of the highest-degree terms:

  [tex]\displaystyle \lim_{t\to\infty}{\dfrac{t-3}{\sqrt{4t^2+25}}} = \lim_{t\to\infty}{\dfrac{t}{\sqrt{4t^2}}}=\dfrac{t}{2t}=\boxed{\dfrac{1}{2}}[/tex]

You can consider the limit when x→0 and t=1/x.

  [tex]\displaystyle \lim_{t\to\infty}{\dfrac{t-3}{\sqrt{4t^2+25}}} = \lim_{x\to 0}{\dfrac{\dfrac{1}{x}-3}{\sqrt{\dfrac{4}{x^2}+25}}}\\\\\\=\lim_{x\to 0}\dfrac{1-3x}{\sqrt{4+25x^2}}=\dfrac{1}{\sqrt{4}}=\boxed{\dfrac{1}{2}}[/tex]

We can use polynomial long division to find the remainder of the expression (5x^3 + 7x + 5) divided by (x + 2). The steps are as follows:

5x^2 - 3x + 19

       ____________

x + 2 | 5x^3 + 7x + 5

      - (5x^2 + 10x)

      ______________

              -3x + 5

              -(-3x - 6)

              ________

                    11

Therefore, the remainder of (5x^3 + 7x + 5) divided by (x + 2) is 11.

Answer:

The remainder of the polynomial equation is -49

Step-by-step explanation:

The inequality system that is represented in the graph are-

y < -x -1 and y ≤ x + 2.

Consider two point on dotted line.

(-1, 0) and (-2, 1)

Fine slope m:

m = (1 - 0)/(-2 + 1)

m = -1

Equation of line:

y - 0 = (-1)(x + 1)

y = -x -1

In the  inequality system.

y < -x -1

Consider two point on bold line.

(0,2) and (-2, 0)

Fine slope m:

m = (0 - 2)/(-2 -0)

m = 1

Equation of line:

y - 2 = (1)(x + 0)

y = x + 2

In the inequality system.

y ≤ x + 2

Thus, the inequality system that is represented in the graph are-

y < -x -1 and y ≤ x + 2.

know more about the inequality system

https://brainly.com/question/11897796

#SPJ1

The triangle congruence postulate used for the given diagram is; SSS

There are different triangle congruency postulates namely:

SSS: Side Side Side Congruency Postulate

SAS: Side Angle Side Congruency Postulate

ASA: Angle Side Angle Congruency Postulate

AAS: Angle Angle Side Congruency Postulate

HL: Hypotenuse Leg Congruency Postulate

From the given image, we see that we see that we have three congruent sides shown of both triangles and as such the triangles are congruent by SSS Congruency Postulate.

Read more about Triangle Congruence Postulate at; https://brainly.com/question/29268713

#SPJ1

Answer:

B. adjacent

Step-by-step explanation:

"adjacent" means they are next to each other (like, touching, they share a side).

"complementary" means that together they make a right angle, or 90°.

"supplementary" means that together they make 180° (a straight angle-- a straight line)

"vertical angles" are made by crossing two lines (that makes four angles) the vertical angles are opposite from each other (touching only at one point) and they are equal.

To find the value of t at which the instantaneous velocity of the particle is equal to its average velocity over the interval (0,8), we need to first determine the instantaneous velocity and the average velocity.

The instantaneous velocity of the particle is the derivative of the distance function with respect to time, given by:

v(t) = dx/dt = 2/3 * t^(-1/3)

The average velocity of the particle over the interval (0,8) is the total distance traveled divided by the total time elapsed:

average velocity = (distance traveled) / (time elapsed)

= x(8) / 8

We can find x(8) by plugging t = 8 into the distance function:

x(8) = (8^(2/3)) = 4

Therefore, the average velocity over the interval (0,8) is 4/8 = 1/2.

Now, we need to find the value of t for which the instantaneous velocity is equal to 1/2. Setting v(t) equal to 1/2 and solving for t, we get:

2/3 * t^(-1/3) = 1/2

t^(-1/3) = 3/4

Taking the cube of both sides, we get:

t = (4/3)^3 = 64/27

Therefore, the instantaneous velocity of the particle is equal to its average velocity over the interval (0,8) when t = 64/27.

A function that could be true based on the given information is g(x) = 5^x.

By examining the presented graph, we can observe that the functions f(x) = 3.5x and h(x) = 1.5x are growing and concave upward, and h(x) has a larger y-axis intercept than f. (x).

Considering these characteristics, the function g(x) = 5x has the potential to be true. This is why:

The rising nature of the function f(x) = 3.5x indicates that its values rise as x rises.

Although the function h(x) = 1.5x is similarly rising, it has a larger y-axis intercept than the function f(x), which means that its values are larger than f(x) for small values of x.

In addition to rising, the function g(x) = 5x also has a larger y-axis intercept than f(x) and h. (x). It is therefore possible that g(x) lies above both functions for all values of x and crosses the graph of f(x) and h(x) at a point to the right of x = 0.

Because they do not have the same characteristics as the functions f(x) and h(x), the functions g(x) = 4, g(x) = (.9), and g(x) = are unlikely to intersect the graph of both functions and remain above them for all values of x. g(x) = 5x is a function that, given the available data, might be true.

To know more about Graph visit:

https://brainly.com/question/16608196

#SPJ1

Answer:

I believe it's B!

Step-by-step explanation:

To get System B from System A, we can use the operation of replacing one equation with a multiple of the other equation. Specifically, we can multiply the first equation of System A by 4 to get:

{32x - 12y = 0, 2x + 7y = 3}

Now, we can see that the first equation of System B is the same as the first equation of the modified System A. The second equation of System B is also equivalent to the second equation of the modified System A, since we can multiply the second equation of the modified System A by 4/2 to get:

{32x - 12y = 0, 8x + 28y = 12}

Therefore, System B can be obtained from System A by replacing one equation with a multiple of the other equation. The correct answer is B.

Hope this helps, I'm sorry if it doesn't! If you need more help, ask me!

the answer is 5x^2+5x+4

Answer:

5x^2+5x+4

Step-by-step explanation:

also can someone help me with my questions

Answer:

i don't know

Step-by-step explanation:

you didn't put that answers

If  the perimeter of a square field is 64 m. If the field is surrounded by a running path of width 3.5 m. The area of the path surrounding the square field is 273 square meters.

Let's denote the side length of the square field as x meters.

The perimeter of a square is given by the formula: Perimeter = 4 * side length

Write the equation:

4x = 64

Divide both sides by 4:

x = 16

So, the side length of the square field is 16 meters.

Now, we need to find the area of the path surrounding the field.

The new side length of the square including the path is: x + 2 * (width of the path)

Substitute

New side length = 16 + 2 * 3.5 = 23 meters

The area of the path:

Area of path = Area of larger square - Area of original square

Area of larger square = (New side length)^2

= 23²

= 529 square meters

Area of original square = (Side length)²

= 16²

= 256 square meters

Area of path = 529 - 256

= 273 square meters

Therefore  the area of the path surrounding the square field is 273 square meters.

Learn more about area here:https://brainly.com/question/25292087

#SPJ1

Considering the square field of each side 16 m, once the 3.5 m wide path is added around the square, the total area increases. The difference between the area of the larger square and the original square gives the area of the path as 273 sq m.

This problem can be solved focusing on square geometry and area calculations. We begin by understanding that the perimeter of the square is 64 m. Since a square has equal sides, each side measures 16 m (i.e., 64 m divided by 4).

The running path that surrounds the field adds a width of 3.5 m around the square. So the total side length of the larger square (field + path) becomes 16 m + 3.5 m + 3.5 m = 23 m.

The total area of the larger square (field + path) is thus 23 m * 23 m = 529 sq m.

Now we subtract the area of the original field (16 m * 16 m = 256 sq m) from this total. Therefore, the area of the path is 529 sq m - 256 sq m = 273 sq m.

https://brainly.com/question/29890529

#SPJ1

Answer:

x = 120°

y=60°

These are the answers