Answer:
0.05 M
Explanation:
First we convert 12 g of NaHSO₄ into moles, using the given molar mass:
12 g NaHSO₄ ÷ 120.1 g/mol = 0.10 mol NaHSO₄We can now calculate the molarity of the resulting solution, using the calculated number of moles and the given volume:
Molarity = moles / litersMolarity = 0.10 mol / 2.00 L = 0.05 MAnswer:
The molarity of the resulting NaHSO₄ solution is 0.05 [tex]\frac{moles}{liter}[/tex]
Explanation:
Molarity or Molar Concentration is the number of moles of solute that are dissolved in a certain volume.
The molarity of a solution is calculated by dividing the moles of the solute by the volume of the solution:
[tex]Molarity=\frac{moles of solute}{volume}[/tex]
Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].
Molar mass is the amount of mass that a substance contains in one mole. Being the molar mass of the compound NaHSO₄ equal to 120.1 g/mole, then the number of moles that 12 grams contain is calculated by:
[tex]12 g*\frac{1 mole}{120.1 g} = 0.1 moles[/tex]
And being 2 L the volume of the solution, then replacing in the definition of molarity you get:
[tex]Molarity=\frac{0.1 moles}{2 L}[/tex]
Molarity= 0.05 [tex]\frac{moles}{liter}[/tex]
The molarity of the resulting NaHSO₄ solution is 0.05 [tex]\frac{moles}{liter}[/tex]
What is the mass of water released by the heating? Show your work or explain your reasoning.
Answer:
Dividing the mass of the water lost by the original mass of hydrate used is equal to the fraction of water in the compound. Multiplying this fraction by 100 gives the percent water in the hydrate.
Explanation:
The amount of water throughout the compound has been determined by dividing the mass of water wasted mostly by original quantity of hydrate used. The above fraction can be multiplied by 100 to get the hydrate's water content in percentages.
What is mass ?The proportion of matter that makes up an object is quantified by its mass. The kilogram, or kg, would be the fundamental SI unit of mass.
What is hydrate?Any substance that contains water through the form of H2O molecules is referred to as a hydrate. This water content by weight can vary, but it is typically fixed. The most well-known hydrates seem to be crystalline solids which decompose once the attached water is removed.
Therefore , The amount of water throughout the compound has been determined by dividing the mass of water wasted mostly by original quantity of hydrate used. The above fraction can be multiplied by 100 to get the hydrate's water content in percentages.
To know more about mass and hydrate.
https://brainly.com/question/11202174
#SPJ3
:)
Why is water called.compound
Answer:
because it's composed of two elements, hydrogen and oxygen. water is technically a molecular compound tho, for it has two hydrogens.
1. Explain where they bury remains at the Forensic Osteological Research Center and why
Answer:
In the middle of the forest.
Explanation:
They have to bury the remains in the middle of the forest at the Forensic Osteological Research Center in order to study the decomposition of the dead person. By studying the decomposition of dead person we can get a lot of information which can be used in the study of criminal cases and solving of crimes. The middle place in the forest is a perfect place to bury the remains due to presence of huge amount of microbes as well as insect that helps in the decomposition.
Why is there no answer
Answer:
i don't know
Explanation:
.
Characteristics of a Group of Elements
Do not conduct electricity
• Mostly gas, but brittle when solid
Has 7 valence electrons
.
Which of these elements is in this groun?
Answer:
Gas
Explanation:
I dunno but a lucky guess i guess
how many protons electrons and neutrons does the following isotopes contain 1H+
Answer:
The other name for this isotope is a proton. This is because it contains just a single proton.
Explanation:
H+
Protons = 1
Electrons = 1 - 1 = 0 (The + sign means it has lost a single electron)
Neutrons = 0
1. A wave has a frequency of 800 Hz and a wavelength of 2000 cm. What speed
is this wave traveling?
Answer:
V=f*(wavelength)
V= (800)(20m)
16000m/s
Explanation:
The number of protons is equal to
a the number of neutrons.
b the atomic mass.
c the number of electrons.
d the atomic number.
Answer:
c the number of electrons
How many molecules are in 32.4 L KOH?
Hey there!!!!!!!!!!!!!!!!!!!!!!!
When collecting temperature as a function of time for the reaction of KOH with HCL, which time is most significant
Answer:
At the completion of reaction.
Explanation:
The time when the reaction take places is the most significant time for measuring temperature of the solution because on this time the temperature will decrease or increase. Some reactions releases heat energy upon completion we called them exothermic reactions whereas some absorb heat energy from the surrounding, decreases the temperature which is known as endothermic reaction so measuring temperature at the completion of reaction is the correct time.
Which states of matter change shape when moved? Which states of matter change shape when moved?
Answer:
Gas and Liquids
Explanation:
40 points plz help quick!! Order the interactions from strongest to weakest.
1. Covalent Bond
2. Ionic Bond
3. Dipole-Dipole Interactions
4. Hydrogen Bond
5. Dispersion forces
Answer:
2,5,4,1,3
Explanation:
Answer:
Ionic Bond
Explanation:
Why would the presence of oxygen bubbles be a good indicator of photosynthesis occurring?
kdjsbjsof in bwjfiejwnjfifihdhwhbsd
Directions Identify the reactants and product in the following reaction.
4A1+302 → 2A1203
Can somebody just name all the metalloids, gases, and liquids that are on the periodic table. please this is due in a hour!!!
Answer:
There are six liquid elements present in the periodic table. They are bromine,mercury ,caesium,gallium,rubidium and francium.
The metalloids; boron (B), silicon (Si), germanium (Ge), arsenic (As), antimony (Sb), tellurium (Te), polonium (Po) and astatine (At) are the elements found along the step like line between metals and non-metals of the periodic table.
The gaseous element group; hydrogen (H), nitogen (N), oxygen (O), fluorine (F), chlorine (Cl) and noble gases helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), radon (Rn) are gases at standard temperature and pressure (STP).
Explanation:
i need help with d and e
Answer:
D: False
E: Ethane
Explanation:
Temperature is a measurement of :
1) total energy in a system
2) the average kinetic energy of a system
3) the average potential energy of a system
4) the ability to do work
Answer:
Temperature is a measure of the average kinetic energy of the particles in an object. When temperature increases, the motion of these particles also increases. (That should give you the answer if you read closely first sentence)
Pls help will give brainlist
Answer:
D. 5
Explanation:
The coefficient will almost always be the whole number in front of the variable.
example
5(x)= 7
The coefficient would be 5.
Which is a disadvantage of using chemical indicators?
They are expensive to use.
They measure pH directly.
They must be selected for a narrow pH range.
They do not use electricity to operate.
WILL AWARD BRAINLIEST FOR FIRST CORRECT ANSWER!
Answer:
They must be selected for a narrow pH range.
Explanation:
Indicators are compounds that change to a specific colour in a solution within a specific pH range.
The chemical indicators does not give the exact value of pH. They only provide the range of pH. They must be selected for a narrow pH range. The correct option is C.
What is chemical indicator?The acid base indicators or neutralization indicators are substances which are employed for the visual detection of the end point on the basis of their ability to change colour during the pH change that occurs in vicinity of the end point.
The chemical indicators are usually weak organic acids or bases which change colour in characteristic pH ranges. The particular range or interval of pH in which an acid-base indicator changes its colour is known as the colour-change interval.
Methyl orange is a weak base which changes its colour in the pH range 3.1-4.4 being red below pH 3.1 and yellow above pH 4.4.
Thus the correct option is C.
To know more about chemical indicators, visit;
https://brainly.com/question/13748767
#SPJ6
Two rocks one weighing 100m and the other weiging 200n are drpped from a 50-m cliff at the same time when both rocks are 10m from the ground and air friction is ignored which is the same
Answer:
Ignore all friction
A Jeweler is making sapphire rings using 2 sapphires on every 1 ring. If the jeweler has 12 sapphires and 10 rings, what is the theoretical yield? (3 points)
O 5 sapphire rings
O 6 sapphire rings
O 10 sapphire rings
O 12 sapphire rings
3 (05 05 LC)
The theoretical yield is 6 sapphire rings.
What is Theoretical yield?This is the total product formed as a result of the complete conversion of
the reactants. In this scenario, the reactant is the 12 sapphires in which 2
of it is needed to produce one sapphire ring.
This however translates to the theoretical yield being 6 sapphire rings
which is gotten by:
2 sapphires = 1 ring
12 sapphires = x
Cross multiply
2x = 12
x= 12/2 = 6 sapphire rings.
Read more about Theoretical yield here https://brainly.com/question/25996347
How do I do nunber 8?
Answer:
DONT CLICK THAT LINK THAT IS HACK AND VIRUS
Explanation:
How many grams are found from 2 moles of glucose C6H1206?
Answer:
360g
Explanation:
Hope it helps you!
Which of the following elements will have its valence electrons represented in figure B?
A. Boron
B. Phosphorus
C. Chlorine
D. Manganese
Answer:
Answer is B
Explanation:
If magnesium and nickel were used as electrodes to construct an electrochemical cell like the one shown at right, which metal would form the anode and which the cathode?
anode:
cathode:
Answer:
anode: magnesium
cathode: nickel
Explanation:
edg. 2021
Which organ detects stimuli from the environment and is part of the nervous system?
Group of answer choices
A. eye
B. stomach
C. heart
D. lungs
It's the eye because it's the organ of sight
Multiple choice
In a given chemical reaction, 1 mol of sulfur reacts with 4 moles of chlorine.
4S + 2Cl2
S + 4 Cl2
S + 2Cl2
S + Cl2
Answer:
S + 4 Cl2
Explanation:
Sulphur - S
1 mol of Sulphur = S
Chlorine = Cl2
4 moles of Chlorine = 4Cl2
4S + 2Cl2
Incorrect option
S + 4 Cl2
Correct option
S + 2Cl2
Incorrect option
S + Cl2
Incorrect option
What does chemistry mean?
Answer:
The definition of chemistry is a branch of science that deals with the form and properties of matter and substances or the interaction between individuals.
3Ba(C2H3O2)2 + 2K3PO4 ⟶ Ba3(PO4)2 + 6KC2H3O2
If 4.36 mol of potassium phosphate react, how many grams of barium phosphate are produced?
Hello Mistyann!
First you need to know amount of barium phosphate is
Half of potassium phosphate, also 2.18 mol.
Molar mass of Barium phosphate is 3·137.2 + 2·(30.97+4·16) g/mol
You can calculate it yourself dear.
Now mass is amount of substance · molar mass.
It has been an honour to teach you, dear,
God bless!
Need help ASAP DUE IN LIKE 2 minutes!!!!!!! Points are added
Proton:
Positive
Found in Nucleus
Mass of 1 AMU
Neutron:
Neutral
Found in Nucleus
Mass of 1 AMU
Electron:
Negative
Found in orbitals
Mass of 0 AMU
Please mark Brainliest if this helped you! :)