11. Which one of the following contains the same number of atoms as 7 g

of iron?

(a) 4 g of aluminium (b) 4g of magnesium (C) 4g of sulphur

(d) 3 g of carbon (e) 4 g of calcium

Answer:

The name of the formula AuCN is gold cyanide.

The enthalpy of the formation of cesium chloride is -68.4 kJ/mol.

The enthalpy of formation of caesium chloride (CsCl) can be calculated using the following equation:

ΔHf⁰(CsCl) = ΔHf⁰(Cs) + ΔHf⁰(Cl) - ΔHf⁰(CsCl)

We are given the enthalpy of sublimation of caesium, which tells us the energy required to convert solid caesium into gaseous caesium:

ΔHsub⁰(Cs) = +77.6 kJ/mol

Since the enthalpy of formation of an element in its standard state is zero, we can assume that:

ΔHf⁰(Cs) = 0

The enthalpy of formation of chlorine gas (Cl₂) is -95.7 kJ/mol. The enthalpy change for the reaction that forms CsCl can be written as:

Cs(s) + 1/2 Cl₂(g) → CsCl(s)

The enthalpy change for this reaction is equal to the enthalpy of formation of CsCl:

ΔHf⁰(CsCl) = ΔHf⁰(Cs) + 1/2 ΔHf⁰(Cl₂) - ΔHrxn

where ΔHrxn is the enthalpy change for the reaction. We can use Hess's Law to calculate ΔHrxn by considering the following two steps:

Cs(s) → Cs(g) ΔHsub⁰(Cs) = +77.6 kJ/mol (endothermic)

1/2 Cl₂(g) → Cl(g) ΔHdiss⁰(Cl) = +121 kJ/mol (endothermic)

Adding these two reactions gives:

Cs(s) + 1/2 Cl₂(g) → Cs(g) + Cl(g) ΔHrxn = ΔHsub⁰(Cs) + 1/2 ΔHdiss⁰(Cl)

Substituting the values we have for ΔHsub⁰(Cs) and ΔHdiss⁰(Cl) gives:

ΔHrxn = +77.6 kJ/mol + 1/2(+121 kJ/mol) = +138.3 kJ/mol

Substituting all the values into the equation for ΔHf⁰(CsCl) gives:

ΔHf⁰(CsCl) = 0 + 1/2(-95.7 kJ/mol) - (-138.3 kJ/mol)

ΔHf⁰(CsCl) = -68.4 kJ/mol

Learn more about enthalpy of formation at: https://brainly.com/question/30431725

#SPJ1  

Where energy from the sun is enough to break the bonds between water molecules in the ice and convert them directly into water vapor without passing through the liquid phase.

What is Sublimation?

Sublimation is a physical process in which a solid substance is transformed directly into a gas without passing through the liquid phase. In other words, sublimation occurs when a solid substance changes its state directly to a vapor state, bypassing the liquid state.

Sublimation occurs when the vapor pressure of a solid exceeds the atmospheric pressure, causing the solid to transform into a gas without melting. This process requires energy to break the intermolecular bonds holding the solid together. This energy is typically supplied through heating or a decrease in pressure.

Water in Earth's polar regions can produce water vapor even when the temperature is very low due to a process called sublimation. Sublimation is a phase transition from a solid directly to a gas, without passing through the liquid phase. This process occurs when the vapor pressure of the solid (in this case, ice) exceeds the atmospheric pressure.

In the polar regions, the air is very cold and dry, with low atmospheric pressure. When the sun shines on the ice or snow, it provides energy that causes the surface layer of the ice to evaporate directly into water vapor without melting into liquid water.

Learn more about Sublimation from given link

https://brainly.com/question/29624780

#SPJ1

A- the ratio of mol water to mol dry gas is 10/100, B- The required air feed rate is 166.67 kmol/h, C- composition of exhaust gas steam is 100% of water.

a) On a wet basis, the molar composition of the gas is 70.0 mol % methane, 15.0 mol % ethane, 5.0 mol % ethylene, and 10.0 mol % water. On a dry basis, the molar composition is 78.26 mol % methane, 17.74 mol % ethane, 4.26 mol % ethylene, and 0 mol % water. The ratio of mol water to mol dry gas is 10.0/100.

b) If 100 kg/h of the fuel is to be burned with 30% excess air, the required air feed rate is 133.33 kmol/h. If the combustion is only 75% complete, the air feed rate would be 166.67 kmol/h.

c) If the fuel burns to 100% completion, the composition of the exhaust gas stream will be 0 mol % methane, 0 mol % ethane, 0 mol % ethylene, and 100 mol % water.

Learn more about air feed rate here:

https://brainly.com/question/14856271

#SPJ11

The molarity of a solution that contains 0.07 mol of K2S in 1.98 L of solution is 0.035 M.

The amount of moles of solute per litre of solution is known as molarity (M).

To calculate the molarity of the given solution, we first need to determine the number of moles of K2S in the solution:

moles of K2S = 0.07 mol

The solution's volume in litres must then be calculated:

volume of solution = 1.98 L

Now we can use the formula for molarity:

Molarity = moles of solute / volume of solution

Substituting the given values:

Molarity = 0.07 mol / 1.98 L

Molarity = 0.035 M

Therefore, the molarity of the solution is 0.035 M.

for such more question on molarity

https://brainly.com/question/14469428

#SPJ4

Answer:

To determine the age of the ancient cloth, we can use the concept of radioactive decay and the half-life of Carbon-14.

Carbon-14 is a radioactive isotope of carbon, which decays over time into nitrogen-14 through beta decay. The half-life of Carbon-14 is 5614 years, which means that after 5614 years, half of the original amount of Carbon-14 in a sample will have decayed.

In this case, the cloth contains only ¼ of its original Carbon-14. This means that three half-lives have passed since the cloth was first created, as each half-life reduces the amount of Carbon-14 by half.

To determine the age of the cloth, we can use the following formula:

N = N0(1/2)^t/T

where N is the current amount of Carbon-14 in the cloth, N0 is the original amount of Carbon-14 in the cloth, t is the time that has passed, and T is the half-life of Carbon-14.

We know that N = ¼ N0, and T = 5614 years. Plugging these values into the formula, we get:

¼ N0 = N0(1/2)^(3/T)

Solving for t, we get:

t = (3/T) * log(2)

Substituting in T = 5614 years, we get:

t = (3/5614) * log(2) ≈ 1,684 years

Therefore, the cloth is approximately 1,684 years old.

In summary, we can use the concept of radioactive decay and the half-life of Carbon-14 to determine the age of the ancient cloth. By knowing the current amount of Carbon-14 in the cloth, we can calculate the time that has passed since it was first created using a simple formula. In this case, the cloth is approximately 1,684 years old.

35.7 ml of 0.150 M NaOH will be needed to completely neutralize the citric acid solution.

Citric acid is a triprotic weak acid, and 11.9 ml of 0.150 M NaOH is required to reach the first equivalence point of a solution of citric acid.

Citric acid, being a weak acid, is not completely ionized in solution. As a result, it will require more than 1 equivalent of base to neutralize it completely. So, it is necessary to calculate the number of equivalents present in the solution to answer the question. Let's first write the balanced chemical equation between citric acid (H3C6H5O7) and NaOH as follows:

H3C6H5O7 + NaOH → Na3C6H5O7 + H2O

For each mole of citric acid, three moles of NaOH are required to neutralize it completely. Since the citric acid solution is 0.150 M, there will be 0.150 moles of citric acid per liter of solution (Molarity = moles/liter).

Thus, the number of moles of citric acid present in 11.9 ml of solution can be calculated as follows: 0.150 moles of citric acid / 1000 ml of solution = X moles of citric acid / 11.9 ml of solution X = 0.001785 moles of citric acid Therefore, 3 times the number of moles of citric acid will be the number of moles of NaOH required to neutralize the citric acid completely. Therefore, the number of moles of NaOH required to neutralize the citric acid completely is as follows: 3 X 0.001785 moles of citric acid = 0.005355 moles of NaOH.

The volume of 0.150 M NaOH needed to contain 0.005355 moles of NaOH can be calculated as follows:

Molarity = moles/volume

Volume = moles / Molarity = 0.005355 moles / 0.150 M = 0.0357 L or 35.7 ml.

Therefore, 35.7 ml of 0.150 M NaOH will be needed to completely neutralize the citric acid solution.

Learn more about weak acid on:

https://brainly.com/question/24018697

#SPJ11

When Hydrogen gas was cooled from 15 C to -15 C by use of the formula we get the value of the original volume as 671.875 mL.

Charles' Law describes the link that exists between the volume and temperature of a specific amount of ideal gas kept at constant pressure.

This rule says that for a given amount of gas at constant pressure, as the temperature rises, the volume of the gas rises, and as the temperature falls, the volume of the gas falls because temperature is directly proportional to the energy of movement of the gas molecules. That is, the volume of the gas is precisely proportional to its temperature.

The kinetic energy of a gas's molecules is exactly proportional to its absolute temperature, according to the kinetic theory of gases. The kinetic energy of the component molecules reduces as the temperature of the gas falls.

We have,

v1 t1 = v2 t2

v1 = x

v2 = 750 mL

t1 = 15 + 273 = 288 K

t2 = -15 + 273 = 258 K

putting the values in the equation,

x(288) = (750)(258)

x = 193500 / 288

x = 671.875 mL

So the original volume was 671.875 mL.

Learn more about Gas cooling:

https://brainly.com/question/20643995

#SPJ4

Answer:2, 7, 4, 6

Explanation:

2 C2H6 + 7 O2 → 4 CO2 + 6 H2O

Therefore, the pH at the equivalence point in the titration of a 15.4 mL sample of a 0.344 M aqueous hypochlorous acid solution with a 0.412 M aqueous sodium hydroxide solution is 7.542.

The pH at the equivalence point in the titration of a 15.4 mL sample of a 0.344 M aqueous hypochlorous acid solution with a 0.412 M aqueous sodium hydroxide solution can be calculated using the following steps:

1. First, determine the number of moles of hypochlorous acid (HOCl) in the 15.4 mL sample:
[tex]0.344 M * 0.0154 L = 0.00530[/tex] moles of HOCl

2. Next, determine the number of moles of sodium hydroxide (NaOH) needed to reach the equivalence point:
0.00530 moles of HOCl * (1 mole of NaOH / 1 mole of HOCl) = 0.00530 moles of NaOH

3. Calculate the volume of the 0.412 M NaOH solution needed to reach the equivalence point:
0.00530 moles of NaOH / 0.412 M = 0.0129 L or 12.9 mL

4. At the equivalence point, the moles of HOCl and NaOH are equal, and the resulting solution contains only water and the salt sodium hypochlorite (NaOCl). The pH of the solution will depend on the dissociation of the salt:
NaOCl → Na+ + OCl-

5. The hypochlorite ion (OCl-) can undergo hydrolysis to form hypochlorous acid and hydroxide ions:
OCl- + H2O → HOCl + OH-

6. The presence of the hydroxide ions will increase the pH of the solution. To calculate the pH, we can use the Kb value for the hypochlorite ion, which is [tex]2.9 x 10^{-7}[/tex]:
[tex]Kb = [HOCl][OH-] / [OCl-][/tex]

7. Assuming that the initial concentration of OCl- is equal to the concentration of NaOH at the equivalence point (0.412 M), we can rearrange the Kb equation and solve for the concentration of OH-:
[tex][OH-] = Kb * [OCl-] / [HOCl]\\\\ [OH-] = (2.9 * 10^{-7} ) * (0.412) / (0.344)\\\\ [OH-] = 3.48 * 10^{-7} 10^-7 M[/tex]

8. Finally, we can use the concentration of OH- to calculate the pH of the solution:
[tex]pOH = -log[OH-] = -log(3.48*10^{-7} ) = 6.458[/tex]
[tex]pH = 14 - pOH = 14 - 6.458 = 7.542[/tex]

For more question on pH click on

https://brainly.com/question/172153

#SPJ4

Answer: series circuit

Explanation:

when one bulb burns out the other bulb will go off because the circuit breaks

If 5.00L of nitrogen completely reacts with hydrogen at a pressure of 3.00atm and a temperature of 298k,approximately 20.67 grams of ammonia will be produced.

The balanced chemical equation for the reaction between nitrogen and hydrogen to form ammonia is:

N2 + 3H2 → 2NH3

We can use the ideal gas law to calculate the number of moles of nitrogen:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant (0.0821 L atm mol K), and T is the temperature in Kelvin.

Rearranging the equation, we get:

n = PV/RT

Substituting the given values, we get:

n = (3.00 atm) (5.00 L) / (0.0821 L atm mol K) (298 K)

n = 0.607 mol

n(NH3) = 2 × n(N2) = 2 × 0.607 mol = 1.214 mol

Mass(NH3) = n(NH3) × M(NH3) = 1.214 mol × 17.03 g/mol ≈ 20.67 g

learn more about moles here:

https://brainly.com/question/28239680

#SPJ4

7. a. Carbon dioxide (CO2) is the gas that might be dissolved in the blood on the right side of the heart.

b. CO2 is produced as a waste product of cellular respiration, which is the process by which cells produce energy.

c. Before the blood enters the left side of the heart, CO2 is transported from the tissues to the lungs, where it is exchanged for oxygen.

8. The flow pattern of the blood inside the circulatory system is unidirectional,  with the blood flowing from the right atrium to the right ventricle, then to the lungs, and from the lungs to the left atrium and left ventricle, and finally to the body.

The entrances and exits to the heart need valves to maintain the unidirectional flow pattern of the blood.

The atrioventricular valves (tricuspid valve on the right side and mitral valve on the left side) prevent the backflow of blood from the ventricles to the atria, while the semilunar valves (pulmonary valve on the right side and aortic valve on the left side) prevent the backflow of blood from the arteries to the ventricles.

The heart also needs a pacemaker to coordinate the contraction of the atria and the ventricles to ensure the efficient pumping of blood.

Learn more about blood gases at: https://brainly.com/question/30334511

#SPJ1

Answer: you have to do x+axis than you will get ur answer

Explanation:During a chemical reaction, all of the atoms that make up the reactants rearrange to form the products.

4.2 gram should the chef mass out of a chocolate chip cookie recipe calls for 0. 050 moles of baking soda. This calculated by using mole concept.

Mass is equal to the number of moles multiplied by the molar mass of substance. We know that the number of moles is equal to the actual given mass of the substance over its molar mass.

      m = n x M.

The term molar mass of a chemical compound is defined as the ratio between the mass and the amount of substance of any sample of said compound. It is a bulk, not molecular, property of a substance.

According to the mole concept, one mole of a compound contains Avogadro's number that is 6.022 x 1023 of molecules or formula units of ionic compound. The molar mass of a compound defined as the mass of 1 mole of that substance. Generally we can say the number of grams per mole of a compound.

putting the value in the expression we get,

mass =84 × 0.050

        =4.2 g.

To learn more about Mole concept

https://brainly.com/question/16488605

#SPJ4

Given that the masses of species involved are given in atomic mass units below each species, and 1 amu can create 932 meV of energy. Therefore, the energy liberated due to the transformation of mass into energy during this reaction is 1285.44 MeV.

The energy liberated due to the transformation of mass into energy during this reaction can be found by using the following formula: E = (Δm)c² Where E = Energy liberated during the transformation of mass into energy.

Δm = Change in mass during the transformation.

c = Speed of light in a vacuum (3.0 x 10⁸ m/s)

Given that, the masses of species involved are given in atomic mass units below each species, and 1 amu can create 932 meV of energy.

Therefore, first find the mass difference between the reactant and product as shown below: N + O → P + Q

Species Mass N 14 amu

O 16 amu

P 16 amu

Q 14 amu

Total 60 amu

Mass of reactants = 14 + 16 = 30 amu

Mass of products = 16 + 14 = 30 amu

Δm = (Mass of reactants - Mass of products)Δm = 30 - 30Δm = 0amu

Now, calculate the energy liberated as follows: E = (Δm)c²E = 0 x (3 x 10⁸)²E = 0 x 9 x 10¹⁶E = 0 MeV

Therefore, the energy liberated during the transformation of mass into energy is 0 MeV, which indicates that the reaction is not exothermic or endothermic.

To know about energy, refer here:

https://brainly.com/question/1932868#

#SPJ11

The equilibrium constant (Keq) for the reaction 2SO2(g) + O2(g) 2SO3(g) is correctly expressed as Keq = [SO3]2 / ([SO2]2 [O2]).

The ratio of the mathematical product of the concentrations of the products of a reaction to the mathematical product of the concentrations of the reactants of the reaction is known as the equilibrium constant (Keq). The balanced chemical equation causes each concentration to grow to the power of its corresponding coefficient.

Keq's "K" stands for "Constant," thus. At a specific temperature, the "eq" indicates that the reaction is at equilibrium. No matter what we would try to do with the concentrations, the value of this ratio remains at 0.0183.

To know more about equilibrium constant visit:-

https://brainly.com/question/10038290

#SPJ1

Answer:

Reactant molecules collide less frequently.

Explanation:

The decrease in temperature decreases the kinetic energy of the reactant molecules leading to decreased chances of collisions of the reactants for the formation of the products.

At the equivalence point of the titration, the pH is 12.88. When 28.9 ml of 0.0850 m H₂SO₄ is titrated with 0.0372 m NaOH.

Given:

Volume of H₂SO₃ solution (V₁) = 28.9 mL

= 0.0289 L

Concentration of H₂SO₃ (C₁) = 0.0850 M

Volume of NaOH solution (V₂) = unknown

Concentration of NaOH (C₂) = 0.0372 M

H₂SO₄ is a diprotic acid, so it can donate two protons. The balanced equation for the reaction between H₂SO₃ and NaOH is as follows:

H₂SO₃ + 2NaOH → Na₂SO₃ + 2H₂O

From the equation, 1 mole of H₂SO₃ reacts with 2 moles of NaOH.

Use the stoichiometry of the reaction:

C₁V₁ = C₂V₂

0.0850 M × 0.0289 L = 0.0372 M × V2

V2 = (0.0850 M × 0.0289 L) / 0.0372 M

V2 = 0.0658 L

= 65.8 mL

Therefore, the volume of NaOH required to reach the equivalence point is 65.8 mL.

Since NaOH is a strong base, it fully dissociates in water to produce OH- ions. At the equivalence point, the moles of OH- ions will be equal to twice the moles of H₂SO₃ initially present.

Moles of H₂SO₃ = C1 × V1

Moles of H₂SO₃ = 0.0850 M × 0.0289 L

= 0.00246 moles

Moles of OH- ions = 2 × Moles of H₂SO₃

Moles of OH- ions = 2 × 0.00246 moles

= 0.00492 moles

Concentration of OH- ions = Moles of OH- ions / V₂

Concentration of OH- ions = 0.00492 moles / 0.0658 L

Concentration of OH- ions = 0.0749 M

pOH = -log10[OH-]

pOH = -log10(0.0749)

pOH = 1.12

pH + pOH = 14:

pH + 1.12 = 14

pH = 14 - 1.12

pH = 12.88

To learn more about the equivalence point, follow the link:

https://brainly.com/question/31671460

#SPJ12

The molarity of the stock solution is 1.05 M.

We can use the equation for dilution to solve this problem:

M₁V₁ = M₂V₂

where M₁ is the initial molarity (of the stock solution), V₁ is the initial volume (in mL) of the stock solution, M₂ is the final molarity (after dilution), and V₂ is final volume (in mL) of diluted solution.

In this case, we know that V₁ = 22.0 mL, V₂ = 50.0 mL, and M₂ = 0.458 M. We want to solve for M₁.

Plugging in the values, we get:

M₁(22.0 mL) = (0.458 M)(50.0 mL)

Simplifying and solving for M₁, we get:

M₁ = (0.458 M)(50.0 mL) / (22.0 mL)

M₁ = 1.05 M

To know more about stock solution here

https://brainly.com/question/17018950

#SPJ4

According to this statement, Power is required to act. (correct) Plants get strength from the sun. (correct) Firewood isn't a source of power. (incorrect).

Firewood is characterized by the Food and Agricultural Organization of the United Nations, or FAO, as "wood in the rough (from trunks and branches of trees) to be used as fuel for uses such as heating, cooking, or power production."

Burning firewood lowers the need over electric heating in your house. If the electricity goes out, you can still heat your house.Wintertime is a crucial time to remember this. Storms can knock out the power for days, putting people's homes, plumbing, and health at danger.

To know more about firewood visit :

https://brainly.com/question/30519575

#SPJ1

At the same temperature, the pH of a 0.001 M Ca(OH)2 aqueous solution will be higher than that of a 0.001 M NaOH(aq).

The pH value of a solution is determined by the concentration of hydrogen ions in the solution. Higher hydrogen ion concentration in a solution leads to lower pH values, while lower hydrogen ion concentration results in higher pH values. The chemical formulas of the two solutions are: Ca(OH)2(aq) → Ca2+(aq) + 2OH-(aq) NaOH(aq) → Na+(aq) + OH-(aq). The hydroxide ion (OH-) concentration of a Ca(OH)2 solution is twice that of a NaOH solution of equal concentration. This is due to the fact that 1 mole of Ca(OH)2 produces two moles of OH- ions, whereas 1 mole of NaOH produces only 1 mole of OH- ions. As a result, the pH of Ca(OH)2 is higher than that of NaOH.

Know more about temperature

https://brainly.com/question/25677592

#SPJ11

The molarity of the solution is 1.11 M (rounded to 2 decimal places). To find the molarity (M) of the solution, we need to know the number of moles of NaCl and the volume of the solution in liters.

Although a solution's molarity is determined by the moles of solute divided by the volume of the solution in litres, a solution's molality is determined by the moles of solute divided by the mass of the solvent in kilogrammes.

The number of moles of NaCl can be calculated using its molar mass and the given mass of NaCl:

Number of moles = mass / molar mass

The molar mass of NaCl is 58.44 g/mol (22.99 g/mol for Na + 35.45 g/mol for Cl).

Number of moles of NaCl = 65 g / 58.44 g/mol = 1.1138 mol (rounded to 4 decimal places)

The volume of the solution is given as 1 liter.

Now we can use the formula for molarity:

Molarity (M) = number of moles / volume (in liters)

M = 1.1138 mol / 1 L = 1.1138 M (rounded to 2 decimal places)

To know more about molarity visit:-

brainly.com/question/8732513

#SPJ1

Answer:

a

Explanation:

A 150 mL solution with a concentration of 12 M whose volume is increased to 600 mL will have a new concentration of 3 M.

Assuming the amount of solute remains constant, we can use the formula:

C1 x V1 = C2 x V2

where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration, and V2 is the final volume.

Plugging in the values, we get:

12 M x 150 mL = C2 x 600 mL

Solving for C2, we get:

C2 = (12 M x 150 mL) / 600 mL

C2 = 3 M

Therefore, the new concentration is 3 M.

More on stoichiometric problems can be found here: https://brainly.com/question/29775083

#SPJ1

The spatial separation between Carbon-12 and Carbon-13 each with a given speed 6.667 x 10^5 m/s is 28.2 x 10^-7 m

The spatial separation between two isotopes of carbon, carbon-12 and carbon-13, can be determined using Mass Spectrometry. Mass Spectrometry uses a combination of magnetic and electric fields to separate ions of different masses based on their charge-to-mass ratio.

The two isotopes of carbon, each singly ionized (e), have a speed of 6.667 x 10^5 m/s and enter the bending region of a mass spectrometer, where the magnetic field is 0.85 t. After they have traveled through a half-circle, the spatial separation between the two isotopes will be calculated using the following formula:

Separation (S) = Speed (V) x Magnetic Field (B) x Time (T)

In this case, Time (T) = (π/2)/V = (π/2)/(6.667 x 10^5 m/s) = 4.5 x 10^-7 s

Therefore, the spatial separation between the two isotopes after they have traveled through a half-circle will be:

Separation (S) = 6.667 x 10^5 m/s x 0.85 t x 4.5 x 10^-7 s = 28.2 x 10^-7 m

Learn more about Mass spectrometer : https://brainly.com/question/16171167

#SPJ11

The correct answer is option B. Ba₂S → 2Ba + S. This is the balanced equation for the decomposition reaction of barium sulfide into its elements.

In a decomposition reaction, a compound breaks down into simpler substances, often its elements. The balanced equation for a decomposition reaction shows the same number of atoms of each element on both sides of the equation.
In option A, there are 8 atoms of barium and 8 atoms of sulfur on the left side of the equation, but only 8 atoms of barium and 1 atom of sulfur on the right side. In option C, there are 1 atom of barium and 2 atoms of sulfur on the left side, but only 1 atom of barium and 2 atoms of sulfur on the right side. In option D, there are 4 atoms of barium and 2 atoms of sulfur on the left side, but 4 atoms of barium and 2 atoms of sulfur on the right side. Only option B has the same number of atoms of each element on both sides of the equation, making it the correct answer.

To learn more about Decomposition reaction :

https://brainly.com/question/14608831

#SPJ11

NaNO3 has a solubility of 80 grams per 100 grams of water at 10oC. (It seems to be somewhat less than 80 grams, but after rounded off, it's practically 80 grams.)

• Assume we just required 60 mL of NaNO3 solution at 10oC. Further Information: Because the solubility of solids rises with temperature, solutes whose curves go higher with increasing temperature are often solids.

Thus the solution in issue is saturated, or even somewhat supersaturated — but you're probably correct.

learn more about NaNO3

https://brainly.com/question/29614071

#SPJ1

H2 is the limiting reactant in this reaction. Water is generated when 5.00 g of H2 and 10.0 g of O2 react. Because there is 10.0 g of surplus reagent, 10.0 g of H2O is generated.

Calculate the amount of moles of product that can be generated from the limiting reactant using mole ratios. To get the equivalent mass of the product, multiply the number of moles by its molar mass. Divide the molar masses of each component to get the mass in moles. Create a balanced equation and calculate the molar ratio.

Examine the formula and compare the moles. In a chemical process, the limiting reagent is the reactant that will be totally consumed. The reaction cannot continue after that reactant is depleted. As a result, it prevents the reaction from proceeding. The surplus reagent is the reactant that may continue to react if the other was not consumed.

Learn more about limiting reactant,

https://brainly.com/question/14225536

#SPJ1

Answer:

2, 15, 12, 6.

Explanation: