Answer:
The temperature of the balloon is 46.34 K.
Explanation:
An ideal gas is a theoretical gas that is considered to be composed of point particles that move randomly and do not interact with each other. Gases in general are ideal when they are at high temperatures and low pressures.
An ideal gas is characterized by three state variables: absolute pressure (P), volume (V), and absolute temperature (T). The relationship between them constitutes the ideal gas law, an equation that relates the three variables if the amount of substance, number of moles n, remains constant and where R is the molar constant of the gases:
P * V = n * R * T
In this case:
P= 0.76 atmV= 10 Ln= 2 molesR= 0.082 [tex]\frac{atm*L}{mol*K}[/tex]T= ?Replacing:
0.76 atm* 10 L= 2 moles* 0.082 [tex]\frac{atm*L}{mol*K}[/tex] *T
Solving:
[tex]T=\frac{0.76 atm* 10 L}{2 moles* 0.082\frac{atm*L}{mol*K}}[/tex]
T= 46.34 K
The temperature of the balloon is 46.34 K.
Does anyone have the chemistry paper 1 higher 2019 mark scheme thank you
no
Explanation:
i simply answered the question
you didnt ask for it you simply asked if i had it
being mad is no use, same with reporting and taking this down
in thoery my answer is correct
so, dont get mad, dot report, dont take this down
this is my protest
Explain why for static electricity to occur between two surfaces that are rubbed against each other, one of the materials has to be an insulator
When two surface come in contact and rub each other a frictional force causing them s deformation and this leads to a voltage giving rise to a static charge.
What is static charge?Static charge is developed within a body temporarily with an induced polarization. These charges are not moving and set into a pole in the material.
When two materials rub against each other in which one is a conductor and other to be an insulator, they will attract by the induced polarization. Rubbing causes the free electrons in the condutor to be transferred towards the insulator.
This will cause a deformation that, the random charges in the material get polarized where the electrons in the insulator will repel to the opposite pol and positive charges will align in a pole close to the condutor.
This charge separation causes the positive pole of the insulator gets attracted into the conductor surface. Hence, there forms a static electricity by the passage of electron.
To find more on static electricity, refer here:
https://brainly.com/question/12791045
#SPJ5
En un tanque se halla CO₂ a 285K ocupando un volumen de 8 L. En esas condiciones determinamos el volumen que ocupa a 393K, considerando que la presión se mantiene constante
Answer:
11.0 L
Explanation:
Podemos resolver este problema usando la ley de Charles, que afirma que a presión constante:
T₁V₂=T₂V₁Donde el subíndice 1 indica las condiciones iniciales y el 2 las finales. En este caso:
T₁ = 285 KV₂ = ?T₂ = 393 KV₁ = 8 LIntroducimos los datos:
285 K * V₂ = 393 K * 8 LY calculamos V₂:
V₂ = 11.0 LPlease help with this , it’s very important
Explanation:
a) Cr is acid K is base
b) Ca is base and the other left part is acid
c)Ca is base and F2 is acid
d) NH4 is acid and SO4 is base
How much energy required to raise the temperature of lead by the same degrees.
Answer:
If a one kilogram block of lead absorbs 2,000 J of energy then the temperature rise will be larger. If 1,000 J of heat is absorbed by a 2 kg block of lead then the temperature of the block doesn't rise as much since the energy is shared between more particles.
Explanation:
what does the prefix non-represent?
O 9 carbon atoms, only
O 9 carbon atoms and 20 hydrogen atoms
O 9 carbon atoms and 18 hydrogen atoms
O 9 carbon atoms and 16 hydrogen atoms
Answer:
O 9 carbon atoms, only
Explanation:
Prefix: non- simply means 9.
Suffix: -ene means double bond, -yne means triple bond, and -ane means single bonded carbons.
Read the given equation:
Ca(OH)2 + 2HCl - CaCl2 + 2H20
Which of the following is true about the equation? (5 points)
HCI is the base and Ca(OH)2 is the salt.
HCI is the acid and Ca(OH)2 is the salt.
Ca(OH)2 is the acid and Cacl2 is the salt.
Ca(OH)2 is the base and CaCl2 is the salt.
Answer:
D.
HCl is acid
Ca(OH)2 is base
CaCl2 is salt
In the given chemical equation Ca(OH)2 is the base and CaCl2 is the salt, thus option D is correct.
What is chemical equation?A chemical equation is a symbolic representation of a chemical reaction that shows the products, reactants, and direction of the reaction.
An acid is any hydrogen-containing substance that is capable of donating a proton (hydrogen ion) to another substance.
A base is a chemical species that donates electrons, accepts protons, or releases hydroxide (OH-) ions in aqueous solution.
A salt, in chemistry, is defined as the product formed from the neutralisation reaction of acids and bases.
Therefore, in this chemical equation option D is true about the equation i.e
Ca(OH)2 is the base and CaCl2 is the salt.
Learn more about chemical equation ,here:
https://brainly.com/question/12047033
#SPJ2
How do you think the human population has changed over time? What makes you say that?
Answer:The world population increased from 1 billion in 1800 to 7.7 billion today. The world population growth rate declined from 2.2% per year 50 years ago to 1.05% per year. Other relevant research: World population growth – This article is focusing on the history of population growth up to the present.
Explanation:
Which effects would many organisms likely experience if global warming occurs? Check all that apply.
disrupted food webs
increased competition
increased number of glaciers
disrupted life-cycle events
forced relocation
and any MHA fan to
Answer:
Disrupted food webs
increased competition
disrupted life-cycle events
forced relocation
Explanation:
Global warming refers to a gradual rise in the temperature of the earth due to the increase in the concentration of greenhouse gases in the atmosphere which trap infrared radiation close to the earth.
This gradual increase in the temperature of the earth often have devastating effects on the lives of various organisms on earth. These effects include;
Disrupted food webs
increased competition
disrupted life-cycle events
forced relocation
Due to changes that occur in the ecosystem as a result of global warming, many species may be compelled to relocate from place to place. This in turn disrupts food webs and may lead to disruption of life cycle events of the concerned organisms. Decrease in the number of certain populations due to global warming may lead to increased competition among species for food.
Im confused someone please help me
Electrical charge of an alpha particle is,
A. +1
B. +2
C. +3
D. +4
what is chemical bonding?and types of chemical bonding there are?
Answer:
There are three primary types of bonding: ionic, covalent, and metallic. Ionic bonding. Definition: An ionic bond is formed when valence electrons are transferred from one atom to the other to complete the outer electron shell. Example: A typical ionically bonded material is NaCl (Salt).Explanation:
Hope it helps
#CarryOnLearning
Where is glycogen stored? (choose all that apply)
muscles
bones
organs
skin
You are given a clear-water solution containing potassium nitrate. How could you determine whether the solution is unsaturated, saturated, or supersaturated?
Answer:
If it is unsaturated, we can dissolve some more amounts of potassium nitrate into it Explanation:
What is the rate of diffusion of NO gas to CO gas?
Answer:
0.97
Explanation:
Let R₁ represent the rate of diffusion of NO.
Let R₂ represent the rate of diffusion of CO.
Molar mass of NO (M₁) = 14 + 16 = 30 g/mol
Molar mass of CO (M₂) = 12 + 16 = 28 g/mol
Thus, the rate of NO to CO can be obtained as follow:
R₁ /R₂ = √(M₂/M₁)
R₁ /R₂ = √(28/30)
R₁ /R₂ = √(28/30)
R₁ /R₂ = 0.97
R₁ : R₂ = 0.97
NO : CO = 0.97
Therefore, the rate of diffusion of NO to CO is 0.97
Why chemical industry important for the nation with its examples.
Explanation:
employment in the country.
economic boom n latest techonology.
less poverty.
more development.
more jobs for people.
increase in exports which will make large profits n will be utilized in the development of country.
GDP per capita will increase.
high standard of living.
Question 1
Part A
Describe the sequence of adding ingredients to make the recipe for condensed tomato soup. To mix the ingredients, you have an industrial-sized vat with a capacity of 800 L. You also have the ability to heat what is in the vat and/or stir the vat, both of which require energy and therefore, cost you money. Focus on the fact that the manufacturing process should be time efficient and cost efficient in terms of energy use. Be sure to refer to the solubility charts or graphs that you find for salt and sugar during your research. Finally, presume that the tomato powder has low solubility which is not temperature dependent.
Part B
What changes could be made to optimize the manufacturing process?
Answer:
Part A:
"360 grams of NaCl can be dissolved in 1 L water. So, 2000 grams sugar can be dissolved in 1 L water then we can say that the solubility of salt is lesser in water as to sugar and both heightened by increasing the temperature. If we make a batch of 800 L we can add sugar, 1600 kg at 25 0c. We can add salt is 288 kg at 25 0c and the ingredient tomato is having low solubility."
Read more at Answer.Ya.Guru – https://answer.ya.guru/questions/8061-describe-the-sequence-of-adding-ingredients-to-make-the-recipe.html
Part B:
'Manufacturers can generate new value minimize cost and increase operational stability by focusing on 4 broad areas; Management, Supply Circle, Product Design, and Value Recovery.'
Read more at Answer.Ya.Guru – https://answer.ya.guru/questions/2807911-what-changes-could-be-made-to-optimize-the-manufacturing-process.html
In order to make tomato soup, the salt NaCl is first added, then followed by sugar and finally the tomato powder.
What are the ingredients required in making tomato soup?Tomato soup is made of the following ingredients:
Tomato powder salt, NaClsugarIn order to make tomato soup, the salt NaCl is first added, then followed by sugar. This is to ensure increase in the boiling point of water and to reduce the heating time of the tomato soup.
The solution is heated to induce more dissolution if solute and finally the tomato powder is added.
In order to optimize the manufacturing process, changes should be made in the design, supply and composition of the soup.
Therefore, an optimized manufacturing process will reduce cost of production.
Learn more about tomato soup at: https://brainly.com/question/21475711
PLEASE PLEASE HELP CHEMISTRY
Sulfur (2.56 grams) was burned in a calorimeter with excess 02(g) . The temperature increased from 21.25C to 26.72C. The bomb had a heat capacity of 923 J/C, and the calorimeter contained 815 grams of water
Calculate the heat evolved as the sulfur burned:
Calculate the heat per mole of SO2 formed in the course of the reaction
S(s) + O2 (g) SO2 (g)
An ideal gas is contained in a cylinder with a volume of 5.0x102 mL at a temperature of 30°C and a pressure of 710. Torr. The gas is then compressed to a volume of 25 mL, and the temperature is raised to 820° C. What is the new pressure of the gas?
Answer:
51207 torr is the new pressure of the gas
Explanation:
We can solve this question using combined gas law that states:
P1V1T2 = P2V2T1
Where P is pressure, V volume and T absolute temperature of 1, initial state and 2, final state of the gas
Computing the values of the problem:
P1 = 710torr
V1 = 5.0x10²mL
T1 = 273.15 + 30°C = 303.15K
P2 = ?
V2 = 25mL
T2 = 273.15 + 820°C = 1093.15K
Replacing:
710torr*5.0x10²mL*1093.15K = P2*25mL*303.15K
3.881x10⁸torr*mL*K = P2 * 7.579x10³mL*K
P2 = 51207 torr is the new pressure of the gas
Conversion of solid state to liquid state is called fusion; what is meant by latent heat of fusion?
Answer:
Explanation:
Latent heat of fusion, also known as enthalpy of fusion, is the amount of energy that must be supplied to a solid substance (typically in the form of heat) in order to trigger a change in its physical state and convert it into a liquid (when the pressure of the environment is kept constant). For example, the latent heat of fusion of one kilogram of water, which is the amount of heat energy that must be supplied to convert 1 kg of ice without changing the temperature of the environment (which is kept at zero degrees celsius) is 333.55 kilojoules
The latent heat of fusion of a substance also accounts for the energy required to accommodate any increase in the volume of the substance post the change of its physical state. The temperature at which the substance undergoes the phase transition is called the melting point of the substance. Unless specified to be otherwise, the pressure of the environment (when expressing the latent heat of fusion of a substance) is always assumed to be 1 atmosphere of pressure (which is roughly equal to 101.325 kilopascals).
what physical and social systems are involved in the service industry
Answer:
Hey mate.....
Explanation:
This is ur answer........
For example, the communications industry includes all of the physical and social systems that produce books, newspapers, magazines, radio and television broadcasts, billboard advertisements, Internet websites, telephones, and telecommunications, such as the GPS.
Hope it helps!
Brainliest pls!
Follow me! :)
How do you convert from grabs to moles of a substance
1. Divide by the molar mass
2. Subtract the molar mass
3. Add the molar mass
4. Multiple by the molar mass
PLEASE HELP !!!
The correct question is as follows:
How do you convert from grams to moles of a substance
1. Divide by the molar mass
2. Subtract the molar mass
3. Add the molar mass
4. Multiple by the molar mass
Answer: In order to convert from grams to moles of a substance divide by the molar mass.
Explanation:
The number of moles of a substance is the mass of substance in grams divided by its molar mass.
The formula to calculate moles is as follows.
[tex]Moles = \frac{mass}{molar mass}[/tex]
This means that grams are converted to moles when grams is divided by molar mass.
Thus, we can conclude that in order to convert from grams to moles of a substance divide by the molar mass.
A sample of O2 with an initial temperature of 50.0 oC and a volume of 105 L is cooled to -25 oC. The new pressure is 105.4 kPa and the new volume is 55.0 L. What was the initial pressure of the sample? Show your work, using the G.U.E.S.S. method.
Answer:
71.92 kPa
Explanation:
Using the combined gas law equation;
P1V1/T1 = P2V2/T2
Where;
P1 = initial pressure (kPa)
P2 = final pressure (kPa)
V1 = initial volume (L)
V2 = final volume (L)
T1 = initial temperature (K)
T2 = final temperature (K)
According to the information provided in this question;
T1 = 50°C = 50 + 273 = 323K
V1 = 105L
T2 = -25°C = -25 + 273 = 248K
P2 = 105.4 kPa
P1 = ?
V2 = 55.0 L
Using P1V1/T1 = P2V2/T2
P1 × 105/323 = 105.4 × 55/248
105P1/323 = 5797/248
0.325P1 = 23.375
P1 = 23.375 ÷ 0.325
P1 = 71.92 kPa
____is the degree of hotness or coldness of a body or place
Para este mismo ejercicio, si se administran 2.5 litros de está solución (2,500ml) en un intervalo de 24 horas que cantidad en gramos de paciente en un día?
Answer:
Se administran 2500 gramos de solución por día.
Explanation:
Dado
Volumen de la solución = 2,5 litros
Como sabemos 1 litro = 1000 gramos
Por lo tanto, 2.5 litros = 2500 gramos
Se administran 2,5 litros en un intervalo de 24 horas o 1 día.
De ahí que se pueda decir que se administran 2500 gramos de solución al día.
Formulas for the compounds below.
Sulfur Trioxide
Sodium hydroxide
Sulphur Trioxide = So3
Sodium Hydroxide = NaoH
Answer:
[tex]\huge\boxed{Sulfur \ Trioxide\hookleftarrow}[/tex]
✐ SO3[tex]\huge\boxed{Sodium \ Hydroxide\hookleftarrow}[/tex]
✐ NaOHʰᵒᵖᵉ ⁱᵗ ʰᵉˡᵖˢ
# ꧁❣ RainbowSalt2²2² ࿐
conclusion on friendship
Explanation:
Conclusion. A good friendship is very difficult to come across. That is why we should appreciate this divine relationship that is based on understanding and feelings. ... A true friend is one of the most precious possessions that one can have in his life.Hope it's helpful for Yuh bro!!
Answer:
Friendship is, in many respects, a "comfortable" love relationship. Friendships involve as little or as much intimacy as the partners are inclined to express at any given time. Friends are not normally obligated to exchange benefits, but do so in ways that are often so natural as to be unwitting. The ties that bind them are by unfettered mutual consent. In spite of its being so comfortable, in fact because of it, friendship contributes in unique ways .
Balance the following equation:
-_MgCO3 → _MgO + __CO2
Answer:
Decomposition
Explanation:
Magnesite = Magnesium Oxide + Carbon Dioxide
Describe the concept of using radioactive elements to establish an age for a fossil. Be sure to include how the parent and daughter elements are used in the determination of age. Answer in 1 paragraph.
Answer:
The nuclear decay of radioactive elements is a process that is a useful tool for determining the absolute age of fossils and rocks. It is used as a clock, in which daughter elements or isotopes converted from parent isotopes by decaying at a particular time.
Radioactive decay rates are constant and do not change over time. It is measured in half-life. A half-life is a time it takes half of a parent isotope to decay and converted into a stable daughter isotope. How many parent isotopes and daughter isotopes present in the fossil or their abundance can help in determining the age of fossil or rock.
An electromagnetic wave has a wavelength of 4000 meters. What is this wave length and scientific notation?
A. 4.0 x 10-3 m
B. 4.0 x 10 3 m
C. 4.0 x 10 2 m
D. 4.0 x 10-2 m
Answer:
Wavelength of electromagnetic wave = 4.0 × 10³
Explanation:
Given:
Wavelength of electromagnetic wave = 4000 meter
Find:
Write, Wavelength of electromagnetic wave into scientific notation
Computation:
Wavelength of electromagnetic wave = 4000 meter
Wavelength of electromagnetic wave = 4.0 × 1,000 meter
Wavelength of electromagnetic wave = 4.0 × 10³
So,
Option "B" is the correct answer to the following question.