1. Write a balanced chemical equation, including physical state symbols, for the combustion of methane in gaseous gaseous carbon dioxide.

Answer:

Explanation:

First Question:

Melting is a physical process that involves the phase transition of a substance from its solid to its liquid state. Burning, on the other hand, is a chemical process that involves a substance being broken down and changed into different substances. It's still the same substance, though: water.

Second Question:

Mass is therefore never conserved because a little of it turns into energy (or a little energy turns into mass) in every reaction. But mass+energy is always conserved. Energy cannot be created out of anything.

Answer:

D

Explanation:

Copper has a more positive reduction potential than Hydrogen and is below Hydrogen in the reactivity series. So it can't displace H+ from diluted acids. Therefore Cu doesn't form Cu salt and a gas

Fe, Zn and Mg are above Hydrogen in the electrochemical series and can displace Hydrogen as follows

Fe(s) + 2HCl(aq) ----> FeCl2 +H2 (g)

Mg(s) + 2HCl(aq) ----> MgCl2 (aq) +H2 (g)

So iii is wrong

Zn(s) +2HCl(aq) ----> ZnCl2(aq) +H2 (g)

I think u asked for the atoms of sulfur? its 4..

Explanation:

calcium = 4

sulfur = 4

oxygen = 4

I hope this is correct

Answer:

Sodium bicarbonate is an antacid used to relieve heartburn and acid indigestion. Your doctor also may prescribe sodium bicarbonate to make your blood or urine less acidic in certain conditions. This medication is sometimes prescribed for other uses; ask your doctor or pharmacist for more information.

A is the petal and b is the leaf. I think.

Answer:

what is meaning of this.

Answer:

On April 30, 1789, George Washington, standing on the balcony of Federal Hall on Wall Street in New York, took his oath of office as the first President of the United States.

Answer:

B

Explanation:

The answer is B. All hydrocarbons are nonpolar, they are insoluble in water and they are highly flammable. Now, not all hydrocarbons have high boiling and melting point. For example, methane (CH4) has a boiling point of something clode to -161°C, and that is low. The boiling point increases when the number of carbon atoms in a compound increases, and based on methane and this theory, not all hydrocarbond have a high boiling point. This makes option B be the correct answer.

Water has the strongest intermolecular forces followed by ethanol and diethyl ether has the least intermolecular forces.

From the table, we can see the vapor pressures of water, ethanol and diethyl ether. The boiling point of water is 100°C, the boiling point of ethanol is 80°C while the boiling point of diethyl ether is 40°C.

We can see that the vapor pressures and approximate normal boiling points of the substances varies with the nature of intermolecular bond forces in the molecule.

Water has highest boiling point and the lowest vapor pressure followed by ethanol. Diethyl ether has the highest vapor pressure and lowest boiling point from the data in the table.

Learn more: https://brainly.com/question/8646601

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

The Correct choice is ~ C

They have the same number of electron shells~

Explanation:

option C is correct.....

sure i can help

so u have to ask someone else

Answer:

they physical quantities that are uneffected by changes to a vector space basis

Answer:

Explanation:

Givens

v1 = 375 cm^3

P1 = 770 mm Hg

V2 = ?

P2 = 750 mm Hg

Formula

V1 P1 = V2 P2

Solution

375 * 770 = V2 * 750    Combine the left

288750 = V2 * 750       Divide both sides by 750

288750/750 = V2

V2 = 385

Answer:

nonreactive

Explanation:

Answer:

A

Explanation:

K took the test

Astronomy subject areas contains questions that can be answered by science. Thus option A is correct.

The science deals with extraterrestrial objects and phenomena, that is everything in our universe beyond the atmosphere of our planet.

This science is more observational than experimental. Astronomy can be up two types such as observational astronomy and theoretical astronomy.

Now a day, the field of astronomy has been expanded enormously in different field of subjects like astrometry, planetary astronomy, astrophysics, astrobiology, astrochemistry, etc.

The field of astrophysics is used understand the nature of celestial objects and their physical processes involve in the formation and emission of radiation.

Other research application include the chemical composition of stars, study of nuclear reactions to know the details about the the radiation energy release from stars.

Thus, Option A is correct.

Learn more about astronomy, here:

https://brainly.com/question/13050965

#SPJ2

Answer:

The answer for number one is .A

The answer for number two is heat rises

Explanation:

The electrostatic forces between molecules of glycerin are the strongest.

We have 4 compounds with their respective boiling points.

The boiling point is the temperature at which a substance passes from the liquid state to the gaseous state.

A high boiling point indicates that the intermolecular forces are strong, so more energy is needed to separate the molecules in the vaporization.

Thus, glycerin, with the highest boiling point, is expected to have the strongest electrostatic forces between their molecules.

The electrostatic forces between molecules of glycerin are the strongest.

Learn more: https://brainly.com/question/2153588

Answer:

Glycerin

Explanation:

Answer:

Diamond is covalently bonded and has a giant covalent structure. Covalent bonds require lots of energy to break as they are strong so diamond has the highest melting point. Iodine has only weak intermolecular forces (instantaneous dipole-dipole interactions or London forces) whereas hydrogen fluoride has a permanent dipole and can hydrogen bond (as well as having London forces).

Explanation:

hope to help

Answer:

Suspension

Explanation:

It's a suspension because it is not mixed at all, and has distinctly separate layers.

Answer:

Calculate the freezing point of a solution of 3.46 g of a compound,X,in 160 g of benzene. When separate sample of X was vaporised, its density was found 3.27 g/L at 116 c and 773 torr. The freezing point of pure benzen is 5.45 c, and kf is 5 .12 c/m.

Explanation:

First determine molar mass from

P*molar mass = density*R*T

Solve for molar mass. Then

moles = grams/molar mass

Solve for moles

molality = moles/kg solvent

Solve for molality

delta T = Kf*m

Solve for delta T, then convert to freezing point

Answer:

1 would be the answer

protons = atomic # I think

Answer:

hydrogen

Explanation:

hydrogen has the atomic number of 1 which means that hydrogen has one proton and is neutral so it has one electron as well.

Explanation:

Fusion processes require fuel and a confined environment with sufficient temperature, pressure, and confinement time to create a plasma in which fusion can occur. The combination of these figures that results in a power-producing system is known as the Lawson criterion. In stars, the most common fuel is hydrogen, and gravity provides extremely long confinement times that reach the conditions needed for fusion energy production. Proposed fusion reactors generally use hydrogen isotopes such as deuterium and tritium (and especially a mixture of the two), which react more easily than hydrogen to allow them to reach the Lawson criterion requirements with less extreme conditions. Most designs aim to heat their fuel to around 100 million degrees, which presents a major challenge in producing a successful design.

As a source of power, nuclear fusion is expected to have many advantages over fission. These include reduced radioactivity in operation and little high-level nuclear waste, ample fuel supplies, and increased safety. However, the necessary combination of temperature, pressure, and duration has proven to be difficult to produce in a practical and economical manner. Research into fusion reactors began in the 1940s, but to date, no design has produced more fusion power output than the electrical power input.[1] A second issue that affects common reactions is managing neutrons that are released during the reaction, which over time degrade many common materials used within the reaction chamber.

Fusion researchers have investigated various confinement concepts. The early emphasis was on three main systems: z-pinch, stellarator, and magnetic mirror. The current leading designs are the tokamak and inertial confinement (ICF) by laser. Both designs are under research at very large scales, most notably the ITER tokamak in

Answer:

C is the answer I did it and got it right

Fats and oils are used throughout the world for both food applications and industrial uses. They are consumed in butter, shortening, margarine, salad oils, and cooking oils, as well as in animal feeds, fatty acids, soaps, personal care products, biodiesel, paints (made from alkyd resins), lubricants, and greases.

Answer:

The history of basketball began with its invention in 1891 in Springfield, Massachusetts by Canadian physical education instructor James Naismith as a less injury-prone sport than football. Naismith was a 31-year old graduate student when he created the indoor sport to keep athletes indoors during the winters.

Explanation:

The history of basketball began with its invention in 1891 in Springfield, Massachusetts by Canadian physical education instructor James Naismith as a less injury-prone sport than football. Naismith was a 31-year old graduate student when he created the indoor sport to keep athletes indoors during the winters.

Answer:

c>b=a

Explanation:

It is important to note that mass does not affect the average motion/energy per molecule, but temperature does. the higher the temperature the faster the particles are. A has the same temperature as B, so they have the same amount of motion. C is warmer than A and B, so the average motion of the particles in beaker C is the largest

Answer:

C8H12

Explanation:

First find the molar mass

195/1.8 × 1 = 108.3 gmol-1

Then the molecular formula

Mass of C in 1 mole of compound = 88.82×108.3/100

= 96.2 g

Mass of H in 1 mol of.the compound = 108.3×11.18/100 = 12.11 g

Divide the mass by their molar masses to get no. of moles in 108.3 g of compound or 1 mole of compound

Moles of C in one Mole of compound = 96.2g/12 gmol-1 = 8 mol

Moles of H in 1 mole of compound = 12.11g/1 gmol-1 =12 mol

Since we need the molecular formula it's C8H12

Answer:

Hey mate.....

Explanation:

This is ur answer....

Hope it helps!

Brainliest pls!

Follow me! :D